Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
This followup on top of remote branch
Only remove tabs and trailing spaces to make koha-qa pass
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Liz Rea [Thu, 20 Aug 2015 22:23:54 +0000 (10:23 +1200)]
Bug 13618 - memberentrygen.tt errors Not a GLOB reference
Like Jonathan said:
The interpolation of a variable on including a file caused an unexpected
error:
Template process failed: undef error - Not a GLOB reference at
/usr/lib/i386-linux-gnu/perl5/5.20/Template/Provider.pm line 619.
Replaced it with a SWITCH, like the other patch for this similar error.
Jonathan Druart [Tue, 4 Aug 2015 14:51:55 +0000 (15:51 +0100)]
Bug 13618: Fix error 'Not a GLOB reference'
The interpolation of a variable on including a file caused an unexpected
error:
Template process failed: undef error - Not a GLOB reference at
/usr/lib/i386-linux-gnu/perl5/5.20/Template/Provider.pm line 619.
Jonathan Druart [Fri, 23 Jan 2015 12:18:54 +0000 (13:18 +0100)]
Bug 13618: Use Template::Stash::AutoEscaping to use the html filter
Test plan:
0/ sudo cpanm Template::Stash::AutoEscaping
1/ Verify don't reproduce the XSS issue described on bug 13609 and other
xss related bugs.
2/ Try to find some encoding issues (detail page, search results,
facets, etc.)
Bug 14893: Separate temporary storage per instance in Upload.pm
To make life easier when multiple instances are uploading temporary
files to Koha, this patch adds the database name to the upload subfolder
in your /tmp folder.
Note: Although multiple instances could share the same subfolder for
temporary storage (hashvalue is based on a timestamp too), it will be
better to separate them for efficient housekeeping (removing older or
partial files with a cronjob etc.)
Since multiple instances come with separate permissions, keeping them in
separate folders will be much simpler.
Permanent storage is not affected by this patch. The location of permanent
storage is ruled by the upload_path in each config file. Sharing that
space is not recommended too.
Although it may not be strictly necessary yet to remove files from the old
temp storage folder (before the 3.22 release), the accompanying db rev
performs that housekeeping task.
Test plan:
[1] Do not yet apply this patch. Upload a temporary file (use the
tools/upload.pl script without selecting a category).
[2] Check /tmp/koha_upload.
[3] Apply this patch. Run the db rev with web installer.
[4] Upload another temporary file.
[5] Check /tmp for folder [your_database]_upload.
[6] Check that /tmp/koha_upload is gone and the associated records too.
[7] Run the adjusted t/db../Upload.t
Followed test plan. Could not do steps before applying patch [1]-[2]
(I suppose a local permission problem).
After applying patch and updating db file appears in /tmp/[database]
as expected. Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Marcel de Rooy [Wed, 27 Jan 2016 14:44:31 +0000 (15:44 +0100)]
Bug 15240: [QA Follow-up] Minor adjustments
This patch does:
[1] It removes some unused modules.
[2] It adds some options not listed in the synopsis.
[3] It removes an unused sql expression from one query.
Note: In fines related code the third parameter of CalcFine sometimes
is named as days_overdue too.
[4] Corrects a few typos in comments or pod.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Jonathan Druart [Wed, 9 Dec 2015 11:10:33 +0000 (11:10 +0000)]
Bug 15240: Do not process issues with a date due later than today
There is no need to do this job in Perl, MySQL could do it instead.
The idea is to only retrieve the issues info which could be overdued.
To test:
1/ Run the script
2/ Apply the patch
3/ Run the script again, notice the exact same results but execution time is faster
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Jonathan Druart [Mon, 21 Dec 2015 12:31:59 +0000 (12:31 +0000)]
Bug 12636: Do not display unique patron attributes in the batch patron modification
Batch patron modification should not offer to update patron attributes
with values which are designated as unique since such attributes are
required to be unique to a single patron.
Test plan:
Create some patron attributes, some should be unique.
Use the batch patron modification tool to modify patrons.
With this patch, the patron attributes marked as unique won't be
display anymore.
Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Jonathan Druart [Tue, 15 Sep 2015 13:20:22 +0000 (14:20 +0100)]
Bug 14828: use Koha::ItemType[s] in admin/itemtypes
Test plan:
Add/edit/remove item types from the administration module
(admin/itemtypes.pl).
You should get message feedback after each action.
Don't forget to play with the image and try to remove an item type
linked to records (you should not be able to remove it).
Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Jonathan Druart [Tue, 15 Sep 2015 16:03:44 +0000 (17:03 +0100)]
Bug 14828: Remove old package and tests
C4::ItemType can be now removed safely, there is no use of this module.
Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Jonathan Druart [Tue, 15 Sep 2015 16:03:04 +0000 (17:03 +0100)]
Bug 14828: Use Koha::ItemType[s] everywhere C4::ItemType was used
This patch mainly replaces C4::ItemType->all with
Koha::ItemTypes->search.
Test plan:
At the places where the C4::ItemType module was used, confirm there is
no regression:
- acqui/neworderempty.pl
- catalogue/itemsearch.pl
- admin/item_circulation_alerts.pl
and the 2 cataloguing plugins:
- marc21_linking_section.pl
- unimarc_field_4XX.pl
QA step:
prove t/db_dependent/HoldsQueue.t should return green
Note that the tests were buggy.
Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Jonathan Druart [Tue, 15 Sep 2015 16:02:28 +0000 (17:02 +0100)]
Bug 14828: Add Koha::ItemType[s] classes
Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Jonathan Druart [Tue, 5 Jan 2016 14:37:20 +0000 (14:37 +0000)]
Bug 15353: Display the patron image where needed
On the 3 following pages, the patron image was not displayed:
members/discharge.pl
members/pay.pl
members/paycollect.pl
Test plan:
Apply this patch and confirm the image is now displayed
Followed test plan, image displays as expected. Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Fixing the evals in PerlModules.pm to pass perl critic has caused
a regression. If appears that using a block eval will not work here,
at least not in its current form.
Marcel de Rooy [Fri, 22 Jan 2016 09:18:29 +0000 (10:18 +0100)]
Bug 8753: [QA Follow-up] Primary key and collation
This patch includes:
[1] Adds primary key borrowernumber to new table.
[2] Fixes collation.
[3] Removes manual PK in DBIx schema file.
[4] Fixes typo CompletePasswordRevovery.
[5] Removes use strict from opac-password-recovery; Modern::Perl is used.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Liz Rea [Wed, 7 Oct 2015 02:08:10 +0000 (15:08 +1300)]
Bug 8753 - Various little things - removing new dependency, changes to errors, textual updates
Koha already has a sub that creates salts, so lets use that instead of math::Random::secure, so as not to add a new dependency.
Made the references to "Forgotten password" consistent, including adding it to the title of the page.
Also removed the individual error for "this email doesn't belong to this account" as that could expose the existence of a login, which I think we'd rather not do.
Made some of the text more grammatically correct, and more library specific.
To test:
Apply on top of all of the other patches.
All the usual checks, plus make sure there are no typos in any text references.
Signed-off-by: Marc Veron <veron@veron.ch> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
This is a collection of changes taken from different comments (but mostly comment 21 and comment 122).
Passes qa and prove, on my machine at least.
There's also a new test file, Passwordrecovery.t, which covers every method of C4::Passwordrecovery.
To test:
All normal checks plus :
1/ Receive the email
2/ Click on the link
3/ Change the pwd
4/ Click again on the link
5/ You should immediately get an error message
Problems with Math/Random/Secure.pm, is solved in following patch, signing off Signed-off-by: Marc Veron <veron@veron.ch> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Liz Rea [Wed, 13 May 2015 22:31:01 +0000 (10:31 +1200)]
Bug 8753 - Followup - change value text on syspref
Followup changes text from "The user can reset | can not reset their password on OPAC" to "Library users are allowed | not allowed to recover their password via e-mail in the OPAC"
This change more clearly differentiates the purpose of this new preference from OpacPasswordChange.
Bug 8753 - followup - update text for link to match common UI paradigms, fixes OpacPublic disabled view
Also corrects OpacNav being included on the reset page on private catalogues.
Updated the link for forgotten passwords to more closely match common UI paradigms, i.e. Facebook and Twitter
To test:
apply all patches, link should now be the less verbose "Forgot your password?"
disable OpacPublic, anything in opacnav should not appear (you may need to add something to opacnav to test properly)
Bug 8753 - [followup] fix the title on opac-password-recovery.tt
The title stanza was missing a <title></title> around it, causing the extra text to appear.
To test, apply all patches and make sure it looks ok and there is no extra text at the top or bottom of the page.
Maxime Beaulieu [Wed, 11 Mar 2015 17:52:59 +0000 (13:52 -0400)]
Bug 8753 - Add forgot password link to OPAC
I've addressed a lot of Liz Rea's points.
1. I have moved the code from updatedatabase.pl and kohastructure.sql to a file in the atomicupdates directory.
1a. The feature is now off by default when the atomicupdate is run.
2. The password reset link is now visible on the home page, in the modal box and on opac-user.pl .
3. The password recovery pages now use bootstrap markup.
4. I am unsure here. I see "New Password:" and "Confirm new password:".
5. This should still work :).
6. I could not reproduce.
7. I have added the userid field.
You can now reset the password by submitting either your useid or email address.
Both fields can be filled, but the email address must be one of the borrower's (email, emailpro or b_email).
When entering only the email address and two borrowers use that same address, the system tells the user to try with another address or to specify his userid.
8. The text is in the atomicupdate file. Have at it, anyone.
Concerning the email. It is inconvenient for the use to have to wait X minutes for the message queue the be processed.
Maybe we could add a sub in Letters.pm that:
Takes the same argments as EnqueueLetter
Sends the letter.
Saves the letter in the message queue with a 'sent' status.
TEST PLAN:
Setup)
1) apply the patch
2) go to system preferences OPAC>>Privacy and set 'OpacResetPassword' to ON.
2b) make sure that OpacPasswordChange is also ON.
A)
1) refresh front page, click on 'Forgot your password' and enter a VALID address
1b) Also try an INVALID address (valid yet not in your koha db). An error message will show up.
2) An email should be received at that address with a link.
3) Follow the link in the mail to fill the new password.
Until a satisfactory new password is entered, the old password is not reset.
4) Go to main page try the new password.
B)
1) Repeat the password reset, this time use the userid (username) field.
2) Try to reset the password using a userid and an email not linked to the account. An error appears.
3) Make sure the borrower has many available email addresses.
4) For each email, reset the password using both the userid and the email. The link should be sent to the specified address
C)
1) Make sure two borrowers use the same email.
2) Repeat the reset procedure in test case A). An error message appears
Author: Maxime Beaulieu <maxime.beaulieu@inlibro.com>
Followed test plan. Works as described. Signed-off-by: Marc Veron <veron@veron.ch>
New sign-off after testing all patches together Signed-off-by: Marc Veron <veron@veron.ch> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Marc Véron [Sat, 26 Dec 2015 11:28:57 +0000 (12:28 +0100)]
Bug 1983: Checkout: Hold repquest when checking out an item already on loan or reserved
This patch allows to put a hold on an item that is already checked out or reserved.
To test:
- Check out an item A
- Put a hold on an item B
- Verify that the staff user has permission to put holds
- Check out item A to a patron X
- Try to checkout item A to a patron Y
- Verify that you see underneath the buttons for Checkin/Checkout a link
with following text: "Click here to place hold for [Patron X' name]"
- Verify that the link is stylable (div class circ-scheckoutplacehold)
- Verify that the link takes you to the page to place a hold on this biblio
for patron Y
- Do the same for item B and verify that it works for reserved items as well.
- Repeat steps above for a patron who has restrictions, verify that the link
does not appear
- Log in with a staff member who has no permission to place holds
- Repeat steps above for a patron without restrictions, verify that the link
does not appear.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Julian Maurice [Mon, 24 Aug 2015 10:20:17 +0000 (12:20 +0200)]
Bug 7683: Catalog statistics wizard: QA fixes
1/ Do not allow invalid date ranges (from > to) (datepicker only)
2/ Relabel "From:" to "From" for consistency
3/ Fix MIME type for CSV
4/ Use Koha::DateUtils instead of C4::Dates
5/ Use placeholders in SQL query
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
- Add to selectable rows, colums and filters:
- items.notforloan
- items.materials
For each of these fields, retrieve the label in the default cataloging
framework.
If no MARC field is mapped to the field in question, it does not show
this line in the wizard.
If the MARC field is associated with a list of authorized values, it
displays a dropdown list for the filter, otherwise it displays a text
field.
- Add to selectable rows, columns and filters:
- items.dateaccessioned (creation date)
- deleteditems.timestamp (deletion date) (Only if the third option (eg
count deleted items) is selected)
- Add unit tests for GetMarcSubfieldStructureFromKohaField
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Paul Poulain <paul.poulain@biblibre.com> Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Frédéric Demians [Sun, 20 Oct 2013 06:44:55 +0000 (08:44 +0200)]
Bug 11081: Port Koha::Contrib::Tamil indexer into Koha code base
Add two scripts for indexing: koha-index and koha-index-daemon.
Documentation:
perldoc koha-index
perldoc koha-index-daemon
New dependencies:
MooseX::Getopt
MooseX::RW
AnyEvent::Processor
Available as a Debian package: libmoosex-getopt-perl
Test plan:
- Apply the patch
- Install dependencies, if necessary
- Reindex a whole biblio catalog:
koha-index --verbose
- Reindex a whole authorities catalog:
koha-index --source authority --verbose
- Modify 1 biblio record, and index it:
koha-index --select queue
- Modifiy 1 authority record, and index it:
koha-index --select queue --source authority
- Run indexing daemon, with a 15s timeout:
koha-index-daemon --timeout 15
- Modify a biblio record: wait 15s, and see
- Modify an authority record: wait 15s, and see
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Works well, followed test plan without problems
One comment: perhaps an option for koha-index-daemon
to work quietly, without printing information.
No koha-qa errors, but new files don't have license,
fixed in followup
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Owen Leonard [Mon, 7 Dec 2015 19:41:29 +0000 (14:41 -0500)]
Bug 11280 - Change Withdrawn toggle to drop down selection of authorized values
'Withdrawn' is an authorised value just like 'Lost' and 'Damaged,' so
the item detail screen should offer the same means of selecting one of
multiple values.
This patch re-uses the same template markup and code 'Lost' and 'Damage'
use to make it possible to select a specific withdrawn value.
To test you should have multiple values entered for the authorised value
category 'WITHDRAWN'.
1. Apply the patch and locate any record in the catalog.
2. From the detail screen, click the barcode in the items table to go to
the item detail page.
3. Confirm that there is a dropdown list of choices for 'Withdrawn
status.'
4. Try both setting and unsetting various withdrawn statuses.
5. Confirm that setting Lost or Damaged statuses.
Signed-off-by: Aleisha <aleishaamohia@hotmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Liz Rea [Tue, 7 Jul 2015 01:06:36 +0000 (13:06 +1200)]
Bug 13143 - Detect if the password is in a pipe
1. cd kohaclone/debian/scripts
2. sudo koha-passwd instance | cat
Output should be password only
3. sudo koha-passwd instance
Output should be "Password for $instance is: $password"
This will fake out your system enough to get koha-passwd to run in your git
system. Since you are using your git system, no need for the sudo's in
steps 2 & 3. And no need to roll a custom build to test it.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Mark Tompsett [Wed, 26 Nov 2014 21:23:31 +0000 (16:23 -0500)]
Bug 13143: Followup - Correct the pause message
'read anykey' actually requires enter under sh.
This patch changes the string from:
'Press any key to clear the screen...'
to
'Press enter to clear the screen...'
TEST PLAN
---------
1) Apply the first two patches
2) Trigger the script.
2) Press 'q' or anything other than enter when prompted.
--- You could type a whole sentence! Oops!
3) Press enter.
4) Apply this patch
5) Trigger the script.
6) Be happy that you aren't told any key will work.
7) run koha qa tools
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Liz Rea [Fri, 31 Oct 2014 03:34:31 +0000 (16:34 +1300)]
Bug 13143 - follow up - usability improvements
* makes sure output is not on the line with the prompt
* adds ability to clear screen after password display
Same test plan as for original bug.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
2/ run with a bad instance, get an error
# koha-passwd xxxxx
Unknown instance xxxxx
3/ run with a correct instance, get a password
# koha-passwd koha1
foofoo69
4/ run with many instances, get many passwords
# koha-passwd koha1 koha2 koha3
foofoo69
foofoo68
foofoo67
Signed-off-by: Mason James <mtj@kohaaloha.com> Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Hector Castro [Thu, 24 Dec 2015 00:57:56 +0000 (18:57 -0600)]
Bug 13642: (followup) OAI-DC checked by default in OPAC modal
-Fixing default option checked for OAI-DC in OPAC modal
-Move OPAC modal to opac-detail-sidebar.inc to display in MARC view
and ISBD view
This follow-up fix the QA comment in comment 149
Signed-off-by: Frédéric Demians <f.demians@tamil.fr>
Above issue fixed & usable also in MARC/ISBD view
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Hector Castro [Mon, 9 Nov 2015 05:22:47 +0000 (23:22 -0600)]
Bug 13642 - Adding new features for Dublin Core metadata
When Koha export a bibliographic record to DC, makes it in XML format.
This XML not follows the DC-XML recommendations as should be: elements
in uppercase eg. dc:Date, dc:Creator, section 4.2, recommendation 4
explain that "The property names for the 15 DC elements should be all
lower-case." eg. dc:date, dc:creator" and section "4.3 Example - a
simple DC record", xsi:schemaLocation="http://example.org/myapp/
http://example.org/myapp/schema.xsd" schema does not exist.
NOTE: This new feature implement the XSLT transformation for OAI-DC,
SRW-DC and RDF-DC
Test plan
---------------
1) Download Dublin Core file from record detail page. Open up the file,
and make sure that the document not follows the DC-XML
recommendations as should be.
2) Apply patch.
3) Go to whichever bib record in OPAC or staff and click on Save >
Dublin Core. A modal will display, prove all options.
4) Change the system preference 'Opac ExportOptions' by enabling and
disabling Dublin Core and try to download a record.
5) Try several bibliographic records in any format (book, magazine, DVD,
etc.) to confirm that properly exported.
6) Test with all marc flavours.
Sponsored-by: Universidad de El Salvador Signed-off-by: Frederic Demians <f.demians@tamil.fr> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Kyle M Hall [Fri, 16 Oct 2015 14:44:11 +0000 (10:44 -0400)]
Bug 14310 - Suspend and resume indvidual holds from patron holds table
This enhancment adds the ability to suspend and resume individual holds
from the holds table on circulation.pl and moremember.pl.
The interface is inspired/cribbed from the same feature already
available in the opac.
Test Plan:
1) Apply this patch
2) Find a patron with holds
3) Suspend a hold with no resume date
4) Resume the suspended hold
5) Suspend a hold with a resume date
6) Resume the suspended hold
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Cathi Wiggins <CWIGGINS@ci.arcadia.ca.us> Signed-off-by: Megan Wianecki <mwianecki@mplmain.mtpl.org> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Zeno Tajoli [Thu, 4 Jun 2015 15:27:10 +0000 (17:27 +0200)]
Bug 14332: Skip articles in MARC21 using indicator n.2 of field 245
Only in MARC21 is possible to use ind2 of tag 245 to skip articles.
This patch is based on inserting a special template in
koha-indexdefs-to-zebra.xsl With this patch you must not insert index
Title:s in biblio-koha-indexdefs.xml, it is defined in
koha-indexdefs-to-zebra.xsl. It is not the best setup, but I find very
difficult to use biblio-koha-indexdefs.xml.
To test it in a english MARC21 setup:
Insert same records with titles and correct values in ind2 of 245.
If you have articles not in the skiping list of sort-string-utf.chr (The|the|a|A|an|An)
you can see that the sort by articles use also articles.
Insert the patch
Rebuilt indexes from scratch
Now all articles of titles are skipped
TO TEST WITHOUT INDEXING:
1. Go to etc/zebradb/marc_defs/marc21/biblios directory.
2. Put the sample MARCXML file in this directory.
3. Transform the file into Zebra indexes:
xsltproc biblio-zebra-indexdefs.xsl record.xml
Observe that the Title:s index contains:
01 Business and Technologies
4. Apply the patch.
5. Repeat:
xsltproc biblio-zebra-indexdefs.xsl record.xml
Observe that the Title:s index contains:
Business and Technologies
Signed-off-by: Frederic Demians <f.demians@tamil.fr> Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
Verified working using yaz-client (as in
http://wiki.koha-community.org/wiki/Understanding_Zebra_indexing#Examine_Zebra_index,
though note that the `elem zebra::index` seems to be unneeded).
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Enable Amazon images for the staff client - syspref: AmazonCoverImages -> Show
Go to a record detail in the intranet that has an Amazon image, inspect it, and make sure that it
1. Shows
2. has https://images-na. and not http://images.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Basically, just inspect these places and make sure the Amazon images are
using https://images-na instead of http://images
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Liz Rea [Mon, 20 Jul 2015 22:46:14 +0000 (10:46 +1200)]
Bug 14571: HTTPS Amazon images [follow up]
I found a couple more places where we should be using images-na, so I
updated them
* in the shelf browser
* in XISBN related works (honestly not sure how to test this one, but
changing from the http:// url won't hurt anything.)
To test:
* Turn on the shelf browser, and browse for an item that has an amazon
image,
* inspect it, it should be using https://images-na... url.
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Liz Rea [Mon, 20 Jul 2015 22:41:02 +0000 (10:41 +1200)]
Bug 14571: using_https check for ssl connections doesn't work in some situations
To test:
* turn on Amazon images for result and detail in the OPAC
* do a search that will result in an Amazon image being displayed on the
result page
* inspect the cover image that is returned on the result page, it should
be using a https://images-na... Amazon URL.
* click through to the detail for that item
* inspect the cover image that is returned on the detail page, it should
be using a https://images-na... Amazon URL.
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Aleisha [Wed, 13 Jan 2016 23:36:21 +0000 (23:36 +0000)]
Bug 14763: Calculate and display patron age
To test:
1) Go to patron Details page (ie http://localhost:8081/cgi-bin/koha/members/moremember.pl?borrowernumber=51)
2) Confirm that '(x years)' is showing next to the Date of Birth and is correct according to DOB (ie if DOB: 30/11/1996, Age: 19 years)
3) Edit date of birth to be a month later (ie from 30 November to 30 December) so that, as of the date you are testing, the patron has not had their birthday yet
4) Confirm that age changes to be one year younger
5) Edit date of birth to be a different year
6) Confirm that age changes accordingly
Works as expected. Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Julian Maurice [Tue, 13 Oct 2015 10:37:23 +0000 (12:37 +0200)]
Bug 15004: Allow to change amounts of duplicated budgets
When duplicating a budget we now have the possibility to change amounts
of budget and funds by a given percentage. Additionally, we can
configure how to round the amounts.
Test plan:
1. Create a budget and several funds with different amounts
2. Duplicate it using the 2 new options
3. Check that the amounts are correct
Signed-off-by: Frederic Demians <f.demians@tamil.fr>
It works exactly as advertised. Was happy to see that decimal point
can be used: for example, increase a budget by 2.6%, and round the
amound to 0.5.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Marc Véron [Sat, 31 Oct 2015 20:24:44 +0000 (21:24 +0100)]
Bug 15096: Export today's checked in barcodes: Display warning if reading history is set to "never"
If a patron's privacy settings are set to "Never" for keeping a reading history, "Export today's
checked in barcodes" returns an empty file. This patch does not allow to export in such case.
To test:
- Apply patch
- Check out / check in in some items
-Test toolbar:
- On user's detail page, go to More->Export today's checked in barcodes
- Verify that the menu item does not appear if syspref 'intranetreadinghistory'
is set to 'Don't allow'
- Verify that the menu item appears if syspref 'intranetreadinghistory'
is set to allow and
- that the menu item is grayed out with a tooltip if the user has set privacy
settings to never keep a reading history
- that the menu item works as before if user's privacy settings allow reading history.
- Test left tab "Circulation history":
- Verify that the left tab "Circulation history" does not appear if syspref
'intranetreadinghistory' is set to 'Don't allow'
- Verify that the tab appars if syspref 'intranetreadinghistory' is set to 'Allow' and
- that a message appears if user's privacy settings do not allow to keep the reading history
- that the export works as before if user's privacy settings allow to keep the reading history
(Amended and changed test plan for comment #9)
Signed-off-by: Aleisha <aleishaamohia@hotmail.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
And play with id & format parameters
Test format=rdfdc and format=srw_dc
- Or try with bug 13642
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works as advertised. Both XML formats generated successfully. Also fix
problem with OPACBaseURL in UNIMARC environment. Tested with Sandbox too.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Aleisha [Fri, 15 Jan 2016 00:25:52 +0000 (00:25 +0000)]
Bug 15274: Putting <span> tags around entire string where the originally split the sentence
I have only done this where the tags split the sentence.
To test:
1) Go to a borrower's check out page (circulation.pl)
2) Check out a book and specify the due date to a past date (ie, to 2015 etc)
3) Confirm the entire sentence in the error message is styled by the span tags.
4) Create a manual invoice of $100 for the borrower
5) Confirm the entire sentence in the error message styled by span tags.
6) Check the patch and the circulation.tt file and confirm that I haven't missed any tags that split the string and make translation difficult.
I personally do not prefer this patch because the red bold sentences don't look very good and aren't highly readable.
Signed off on this second patch, see screenshots in comment #4.
(Forbidden tab char in line 779 removed) Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Marc Véron [Wed, 2 Dec 2015 08:49:02 +0000 (09:49 +0100)]
Bug 15288: Error pages: Code duplication removal and better translatability
This patch changes the 400, 401, 402, 403, 404, 500 error pages to be handled
by only one template for staff and only one template for OPAC.
Additionally it removes a translatability issues due to sentence splitings by html tags.
To test:
- Apply patch
- Trigger 404 error for staff and for OPAC by calling a page that does not exist
- Try to trigger other error pages and/or carefully review code changes
in the *.pl files
- Review koha-tmpl/opac-tmpl/bootstrap/en/modules/errors/errorpage.tt and
koha-tmpl/intranet-tmpl/prog/en/modules/errorpage.tt
(Amended to fix a typo)
(Amended for comment #6)
(Amended to cover OPAC error pages as well)
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works as advertised
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Aleisha [Wed, 13 Jan 2016 23:44:58 +0000 (23:44 +0000)]
Bug 15403: Tidy up error messages in Staff lists
To test:
1) Create a list on the intranet, observe the message
2) Create another list with the same name, observe the message
3) Delete a list, observe the message
4) Check the patch itself for typos
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Julian Maurice [Wed, 6 Jan 2016 14:30:41 +0000 (15:30 +0100)]
Bug 15481: Remove dead code in datatables.js
This removes the following functions that are not used anywhere:
- dt_add_rangedate_filter
- dt_overwrite_string_sorting_localeCompare
- replace_html
- replace_html_date
Test plan:
1. Search for calls to the above functions in the code. There should be
none.
2. Check that existing tables using DataTables are not broken.
Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Aleisha [Thu, 7 Jan 2016 21:39:33 +0000 (21:39 +0000)]
Bug 15519: Warns when creating a basket
To test:
1) Reproduce warn following steps above
2) Apply patch
3) Create a new basket and click Save. Do not add any items
4) Notice warn is gone
5) Click 'Delete this basket' and confirm that the validation message reads: "Are you sure you want to delete this basket?" Click cancel.
6) Add an order to the basket, then click 'Delete this basket'. Confirm the validation message gives more information and more delete options.
Followed test plan, works as expected. Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
projects / koha.git / log