]> git.koha-community.org Git - koha.git/log
koha.git
8 years agoBug 16805: Log in with database admin user breaks OPAC
Mark Tompsett [Thu, 23 Jun 2016 18:51:26 +0000 (14:51 -0400)]
Bug 16805: Log in with database admin user breaks OPAC

TEST PLAN
---------
1) Apply Jonathan's test patch
2) prove t/db_dependent/Letters.t
   -- dies before finishing tests
3) Apply second test patch
4) prove t/db_dependent/Letters.t
   -- dies before finishing tests
   -- 'addalert' is changed to 'getalert'
5) Log into OPAC with database admin user.
   -- see error given in comment #0
6) Apply this patch
7) prove t/db_dependent/Letters.t
   -- says 'getalert'
   -- all tests pass.
8) Log into OPAC with database admin user.
   -- logs in, but gives warning with a nice logout button.
9) run koha qa test tools.

Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
No kaha qa errors
In debian display diferent error:
Can't use an undefined value as an ARRAY reference at /usr/lib/perl5/DBI.pm line 2054.
Works as advertised

NOTE: Revised test plan, as Jonathan added useful test case.
      Works as I've tested above.
      Hector tested older test plan which was steps
      5,6,8 and 9.

      Revised test plan again while tweaking to address comment #9.

Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 16805: Tweak new test message to say getalert
Mark Tompsett [Fri, 24 Jun 2016 16:28:27 +0000 (12:28 -0400)]
Bug 16805: Tweak new test message to say getalert

It said 'addalert', which is likely a cut-paste typo.
Plus, let's keep running the other tests if that one
goes bad.

TEST PLAN
---------
1) Apply Jonathan's test patch
2) prove t/db_dependent/Letters.t
   -- dies before finishing tests
3) Apply this test patch
4) prove t/db_dependent/Letters.t
   -- still dies before finished tests,
      'addalert' now is 'getalert' in message.
5) run koha qa test tools.

Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 16805: Add test to getalert (no param passed)
Jonathan Druart [Fri, 24 Jun 2016 16:02:59 +0000 (17:02 +0100)]
Bug 16805: Add test to getalert (no param passed)

TEST PLAN
---------
1) apply patch
2) prove t/db_dependent/Letters.t
   -- fails
3) run koha qa test tools

Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 16801 - Include Font Awesome Icons to check/unchek all in Administration > Librar...
Hector Castro [Wed, 22 Jun 2016 17:11:03 +0000 (11:11 -0600)]
Bug 16801 - Include Font Awesome Icons to check/unchek all in Administration > Library transfer limits

For purpose to uniformity and leave just one entry in .po files,
this patch change: Check all/Uncheck all -> to -> Select all/Clear all.
Also added Font Awesome icons.

To test:
-Go to Administration > Library transfer limits
-Notice about Check all/Uncheck all for "For all items types" and
 "Policy for:"
-Apply patch and refresh the screen
-Notice about the new Select all/Clear all links with their icons
-Confirm that all links work as expected

Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 16778: Replace usage of Greybox modals with Bootstrap modals
Owen Leonard [Wed, 1 Jun 2016 14:54:09 +0000 (10:54 -0400)]
Bug 16778: Replace usage of Greybox modals with Bootstrap modals

This patch is a proof-of-concept for replacing Greybox modals in
situations where in-modal page transitions happen. This one addresses
patron card export from the patron lists page.

To test you must have at least one patron lists containing patrons.

- Apply the patch and go to Patrons -> Patron lists.
- In the 'Actions' menu associated with your list, choose 'Print patron
  cards.' A modal window should be triggered.
- In the modal window, change settings as necessary and click the
  "Export" button.
- The modal should reload and display a link to download a PDF. Confirm
  that the PDF download works correctly and that the correct patron
  batch was processed.
- Repeat the process and confirm at each step that clicking the 'X'
  button or the 'Cancel' link dismisses the modal window.

To confirm that changes to the patron card print template has not
adversely affected printing patron cards from the patron card creator
page:

- Go to Tools -> Patron card creator.
- Choose Manage -> Card batches.
- Click 'Export' for any batch.
- Confirm that the Greybox modal still works correctly for patron card
  export.

Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works as advertised

Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 16730 - Use member-display-address-style*-includes in moremember-brief.tt
Marc Véron [Tue, 14 Jun 2016 06:41:03 +0000 (08:41 +0200)]
Bug 16730 - Use member-display-address-style*-includes in moremember-brief.tt

To test:
- Apply patch
- Create a new patron with the same first and last name as an existing
  patron. This should trigger a duplicate warning message. Click the
  "View existing record" link to trigger a pop-up window with a patron
  detail brief view.
- Verify that the address information displays the same way as on the
  patron details screen (moremember.pl).
- Change syspref 'AddressFormat' and verify that the address displays
  as appropriate.

Signed-off-by: Frédéric Demians <f.demians@tamil.fr>
  Works as described: AddressFormat is taken into account on 'view exiting
  record' dialog box.

Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 16677 - Use abbr for authorities linked headings
Fridolin Somers [Tue, 7 Jun 2016 07:27:15 +0000 (09:27 +0200)]
Bug 16677 - Use abbr for authorities linked headings

In authorities search results, UNIMARC flavour, linked headings are displayed
with a link type : BT, NT, UF, RT.

This patch adds a abbr tag around those acronyms to know there meaning :
BT = Broader Term
NT = Narrower Term
UF = Used For
RT = Related Term

Acronyms are used because there can be a lot of linked headings, using abbr
will display the complete text on mouse over.

Test plan :

- Use UNIMARC database
- Create an authority with :
250 $a Heading250a
450 $a Heading450a
550 $5 a $a Heading550a
550 $5 g $a Heading550g
550 $5 h $a Heading550h
- Save an index zebraqueue
- Go to intranet authorities search
- Search for "Heading250a"
- You see :
Heading250a
Heading250a
UF: Heading450a
RT: Heading550a ; BT: Heading550g ; NT: Heading550h
- Move your mouse over the acronyms, you see a tip with the complete text
- Same with opac authorities search

Signed-off-by: Frédéric Demians <f.demians@tamil.fr>
  Works as described. Translatable.

Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 16566 [Revised] 'Print slip' button formatting inconsistent
Owen Leonard [Mon, 23 May 2016 15:03:48 +0000 (11:03 -0400)]
Bug 16566 [Revised] 'Print slip' button formatting inconsistent

This patch modifies the style of some "print slip" links on the checkin
page to make them consistent with other buttons shown in dialogs.

This patch also removes the use of "onclick" in some places in favor of
defining events in the JavaScript.

To test apply the patch and go to Circulation -> Check in.

- Check in an item which belongs at another branch. You should see a
  dialog which asks the user to transfer the item. Confirm that the
  "Print slip" button looks correct and works correctly.

- Check in the same item again. You should see a different dialog which
  has both a "Print transfer slip" and "Cancel transfer" button. The
  "Print transfer slip" button should look correct and work correctly.

- Check in an item which is part of a rotating collection. (Or, if Bug
  16570 is still open, check in any item) You should see a dialog which
  notifies you that the item is part of a rotating collection. The
  "Print slip" button in this dialog should look correct and work
  correctly.

Followed test plan. Buttons appear as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Revision following QA: Removed redundant class attribute from the print
button tested in step 1.

Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 16324: Move item search into header
Aleisha [Thu, 21 Apr 2016 22:49:29 +0000 (22:49 +0000)]
Bug 16324: Move item search into header

This patch makes the Search button in the header into a dropdown that holds the Advanced search and the Item search.
I have rewritten this patch to be independent of Bug 16323 since that patch is so controversial.

To test:
1) Confirm that Advanced search and Item search are both under the 'Search' dropdown menu in the header and both links work as expected

Sponsored-by: Catalyst IT
Signed-off-by: Claire Gravely <c.gravely@arts.ac.uk>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Note that the CAN_user_catalogue test is useless. If a librarian does
not have it, (s)he cannot access to the staff interface.

Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 16271: Allow more filters on /api/v1/holds
Julian Maurice [Fri, 15 Apr 2016 08:49:29 +0000 (10:49 +0200)]
Bug 16271: Allow more filters on /api/v1/holds

borrowernumber parameter is no longer required and you can filter on
every column of reserves table

Some example requests
- GET /api/v1/holds
- GET /api/v1/holds?biblionumber=123
- GET /api/v1/holds?borrowernumber=456
- GET /api/v1/holds?priority=0&found=W

Signed-off-by: Benjamin Rokseth <benjamin.rokseth@kul.oslo.kommune.no>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 15172: (follow-up)Serial enumchron/sequence not visible when returning/checking...
Hector Castro [Wed, 2 Dec 2015 16:56:25 +0000 (10:56 -0600)]
Bug 15172: (follow-up)Serial enumchron/sequence not visible when returning/checking in Items

Display br and span tag only if the value enumchron exists.

To test
-Apply patches
-Follow the previous test plan
-Checkin whichever material (e.g., book) without sequence or enumchrom
-Open up source code for checkin page, search under title and
verify that b and span tags do not appear

Signed-off-by: Alain et Aurélie <aurelie.berut@enssib.fr>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 15172: Serial enumchron/sequence not visible when returning/checking in Items
Olli-Antti Kivilahti [Wed, 11 Nov 2015 11:23:15 +0000 (13:23 +0200)]
Bug 15172: Serial enumchron/sequence not visible when returning/checking in Items

Displays the items.enumchron-column in returns.pl when checking in Items.

Rewording commit

To test:
-Checkout a barcode for serial with items generated in
Serials >  New subscription or item in DB with items.enumchron-column
-Checkin the same barcode, the table Checked-in items will appear without
information about "Publications details (Vol. 400, No. 32)"
-Apply patch
-Checkout and checkin another item of the same serial title
-Notice about the Vol. 400, No. 32 below the serial title.

Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
items.enumchron-column display successful in returns.pl (Home>Circulation>
Check in)
NOTE: Patch rebased on master

Signed-off-by: Alain et Aurélie <aurelie.berut@enssib.fr>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 15128 - DBRev 15128
Kyle M Hall [Fri, 8 Jul 2016 14:11:42 +0000 (14:11 +0000)]
Bug 15128 - DBRev 15128

Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 15128: Do not display "New suggestion" if limit has just been reached
Jonathan Druart [Fri, 1 Jul 2016 16:00:39 +0000 (17:00 +0100)]
Bug 15128: Do not display "New suggestion" if limit has just been reached

If limit is X and patrons has X-1 pending suggestions, when a new one is
added, the "New suggestion" should not been added.
to avoid another call to SearchSuggestions, we assume than the
suggestion has been correctly added.

Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 15128: Revert Display all purchase suggestions whether or not suggestion was...
Jonathan Druart [Fri, 1 Jul 2016 15:55:39 +0000 (16:55 +0100)]
Bug 15128: Revert Display all purchase suggestions whether or not suggestion was added

This does not work correctly and should be handle on another bug report.
The behavior existed prior to this patchset.

Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 15128 - (QA Followup) Don't get patrons suggestions if limit not set
Nick Clemens [Fri, 1 Jul 2016 15:39:00 +0000 (11:39 -0400)]
Bug 15128 - (QA Followup) Don't get patrons suggestions if limit not set

Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 15128 - (QA Followup) Fix use of 'my' variable causing loss of data
Nick Clemens [Fri, 1 Jul 2016 15:36:02 +0000 (11:36 -0400)]
Bug 15128 - (QA Followup) Fix use of 'my' variable causing loss of data

Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 15128 (QA Followup) Display all purchase suggestions whether or not suggestion...
Nick Clemens [Thu, 30 Jun 2016 14:20:39 +0000 (10:20 -0400)]
Bug 15128 (QA Followup) Display all purchase suggestions whether or not suggestion was added Correct enforcement of 0 limit

Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 15128 - Followup
Nick Clemens [Mon, 20 Jun 2016 20:04:21 +0000 (16:04 -0400)]
Bug 15128 - Followup

Only check limit for signed in borrower
Show all suggestions after a new one is added

Signed-off-by: Barbara Walters <bwalters@ncrl.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 15128 [QA Followup 2] - Only count pending suggestions for the limit
Kyle M Hall [Mon, 20 Jun 2016 19:25:12 +0000 (19:25 +0000)]
Bug 15128 [QA Followup 2] - Only count pending suggestions for the limit

Signed-off-by: Barbara Walters <bwalters@ncrl.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 15128 [QA Followup] - Make suggestion display after being added
Kyle M Hall [Mon, 20 Jun 2016 16:44:38 +0000 (16:44 +0000)]
Bug 15128 [QA Followup] - Make suggestion display after being added

Also fixes the issue that the add suggestion link would sometimes
show even if the patron could not make an additional suggestion.

Signed-off-by: Barbara Walters <bwalters@ncrl.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 15128 - Add ability to limit patrons open purchase suggestions
Nick Clemens [Tue, 14 Jun 2016 20:47:43 +0000 (16:47 -0400)]
Bug 15128 - Add ability to limit patrons open purchase suggestions

To test:
1 - Define a number of MaxOpenSuggestions
2 - Add some suggestions for a patron
3 - Note they cannot add any more suggestions if limit is reached
4 - Delete a suggestion and note you can add another
5 - Add them to limit again
6 - Accept a suggestion in the staff client and note user can add more
7 - Repeat above with rejecting or deleting
8 - Sign off.

Sponsored by:
    North Central Regional Library (http://ncrl.org/)

Signed-off-by: Barbara Walters <bwalters@ncrl.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 14902 - Fix issues with updatedatabase.pl
Kyle M Hall [Fri, 8 Jul 2016 14:01:41 +0000 (14:01 +0000)]
Bug 14902 - Fix issues with updatedatabase.pl

Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 14902 - DBRev 16.06.00.009
Kyle M Hall [Fri, 8 Jul 2016 13:59:37 +0000 (13:59 +0000)]
Bug 14902 - DBRev 16.06.00.009

Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 14902 - Add qualifier menu to staff side "Search the Catalog"
Nick Clemens [Fri, 3 Jun 2016 16:52:01 +0000 (12:52 -0400)]
Bug 14902 - Add qualifier menu to staff side "Search the Catalog"

To test:
1 - Apply patch and update dabase
2 - Check that Search the Catalog links throughout the staff interface
have not changed
3 - Set "IntranetCatalogSearchPulldown" to 'Show'
4 - Verify that 'Search the catalog' links through staff client now have
a dropdwon to  select search index

I think viewing one file each that includes updated header should be
sufficient, but please check as many as you can:

cgi-bin/koha/admin/aqbudgetperiods.pl
cgi-bin/koha/admin/admin-home.pl
cgi-bin/koha/cataloguing/addbooks.pl
cgi-bin/koha/circ/returns.pl
cgi-bin/koha/circ/circulation-home.pl
cgi-bin/koha/admin/cities.pl
cgi-bin/koha/admin/aqcontract.pl
cgi-bin/koha/admin/currency.pl
cgi-bin/koha/mainpage.pl
cgi-bin/koha/tools/letter.pl
cgi-bin/koha/members/members-home.pl
cgi-bin/koha/admin/categories.pl
cgi-bin/koha/admin/preferences.pl
cgi-bin/koha/admin/printers.pl
cgi-bin/koha/serials/serials-home.pl
cgi-bin/koha/acqui/newordersuggestion.pl
cgi-bin/koha/admin/z3950servers.pl

Sponsored by:
  Northeast Kansas Library System (http://nekls.org/)

Signed-off-by: Heather Braum <hbraum@nekls.org>
Signed-off-by: Barton Chittenden <barton@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 14790 [QA Followup] - Don't show links unless OPACBaseURL is set
Kyle M Hall [Thu, 23 Jun 2016 14:45:34 +0000 (14:45 +0000)]
Bug 14790 [QA Followup] - Don't show links unless OPACBaseURL is set

Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 14790 - Add OPAC view link to Serials detail
Kyle M Hall [Wed, 15 Jun 2016 14:30:18 +0000 (14:30 +0000)]
Bug 14790 - Add OPAC view link to Serials detail

Test Plan:
1) Apply this patch
2) Browse to subscription-detail.pl for a given serial
3) Note the new "OPAC view" link
4) Click the link, a new tab should open up showing the record
   details for that record in the OPAC

Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 14790 - Add OPAC view link to items editor
Kyle M Hall [Wed, 15 Jun 2016 13:55:28 +0000 (13:55 +0000)]
Bug 14790 - Add OPAC view link to items editor

Test Plan:
1) Apply this patch
2) Find a record and open the items editor for it
3) Click the "Actions" button for an item
4) Choose the option "OPAC view"
5) A new browser tab should open to the OPAC details page for the record
   whose items you are editing.

Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 14790 - Add Opac view link to search results
Kyle M Hall [Wed, 15 Jun 2016 12:27:40 +0000 (12:27 +0000)]
Bug 14790 - Add Opac view link to search results

Test Plan:
1) Apply this patch
2) Perform a staff catalog search
3) Note the new "OPAC view" link
4) Click the link, it should open a new tab to the OPAC details for that
   record.

This works fine except that it doesn't open in a new tab. I don't think
it's the fault of the patch, but of browser.js messing with links again
(See Bug 11937).

Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 14757: Remove obsolete occurrence of is_tt
Jonathan Druart [Tue, 28 Jun 2016 13:37:57 +0000 (14:37 +0100)]
Bug 14757: Remove obsolete occurrence of is_tt

Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 14757 [QA Followup] - Don't overload new for Modifications
Kyle M Hall [Mon, 27 Jun 2016 13:43:59 +0000 (13:43 +0000)]
Bug 14757 [QA Followup] - Don't overload new for Modifications

Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 14757: Add tests for new modules
Jonathan Druart [Fri, 24 Jun 2016 14:28:43 +0000 (15:28 +0100)]
Bug 14757: Add tests for new modules

Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 14757 [QA Followup] - Add Unit Tests
Kyle M Hall [Fri, 22 Jan 2016 12:43:12 +0000 (12:43 +0000)]
Bug 14757 [QA Followup] - Add Unit Tests

Signed-off-by: Sean McGarvey <seanm@pascolibraries.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 14757 - Allow the use of Template Toolkit syntax for slips and notices
Kyle M Hall [Wed, 2 Dec 2015 13:32:44 +0000 (13:32 +0000)]
Bug 14757 - Allow the use of Template Toolkit syntax for slips and notices

This bug is the beginning of a conversion from our current bespoke
syntax for slips and notices to Template Toolkit syntax.

This patch is the initial seed which will evolve over time.
With this addition, we can take advantage of our Koha Objects
to greatly simplify the processing of Slips and Notices over time.

Test Plan:
1) Apply this patch
2) Ensure you have the default CHECKOUT notice
3) Check out and return an item for a patron
4) Note the text of the CHECKOUT notice
5) Replace your CHECKOUT notice with the following:

The following items have been checked out:
----
[% biblio.title %]
----
Thank you for visiting [% branch.branchname %].

6) Repeat step 3
7) Note the CHECKOUT notice text matches the previous CHECKOUT notice text

Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
New notice syntax works, no koha-qa errors

Signed-off-by: Sean McGarvey <seanm@pascolibraries.org>
Bug 14757 [QA Followup] - Change method type() to _type() for Koha objects

Signed-off-by: Sean McGarvey <seanm@pascolibraries.org>
Bug 14757 [QA Followup] - Change all references to Koha::Borrower to Koha::Patron

Signed-off-by: Sean McGarvey <seanm@pascolibraries.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 10760: (followup) Move street type after address
Marc Véron [Mon, 20 Jun 2016 12:59:11 +0000 (14:59 +0200)]
Bug 10760: (followup) Move street type after address

As of comment #7

Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 10760: Alternate Address: Display street number and street type
Marc Véron [Tue, 14 Jun 2016 08:57:52 +0000 (10:57 +0200)]
Bug 10760: Alternate Address: Display street number and street type

This patch displays alternate streetnumber and street type on patron's
detail page.

To test:
- Apply patch
- Verify that the alternate address information displays follwing the
  setting in syspref AddressFormat and contains street type and
  street number (as appropriate)

Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 10760: Alternate Address: Make street number and street type editable
Marc Véron [Tue, 14 Jun 2016 08:14:29 +0000 (10:14 +0200)]
Bug 10760: Alternate Address: Make street number and street type editable

Table 'borrowers' contain columns B_streetnumber and B_streettype.
This patch makes them editable for alternate address.

To test:
- Apply patch
- Edit a patron's details
- Verify that in edit mode for Alternate address, the fields 'street type' and 'street number' appear
  and follow the settings in sysprefs AddressFormat, BorrowerMandatoryField, BorrowerUnwantedField
- Verify that the values are saved correctly.

Note: A second patch will follow to manage the display of street number and street type
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 9259: Use is instead of is_deeply
Jonathan Druart [Wed, 6 Jul 2016 15:57:05 +0000 (16:57 +0100)]
Bug 9259: Use is instead of is_deeply

Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 9259: Ability to delete a staged file once it has been cleaned
Aleisha [Tue, 29 Mar 2016 00:04:36 +0000 (00:04 +0000)]
Bug 9259: Ability to delete a staged file once it has been cleaned

To test:
1) Go to Tools -> Staged MARC Management and clean a file. If you have no files to clean, go to 'Stage MARC for import' and upload one to clean following the necessary steps.
2) Confirm that once the file has been cleaned, the Action column now shows a Delete button. Confirm this button only shows for cleaned files.
3) Click the Delete button.
4) Confirm that clicking Cancel exits the pop-up message and does not delete the file.
5) Confirm that clicking OK refreshes the list of staged records and the one you just deleted is no longer on it (has been deleted). You can confirm this by checking for the file in mysql (SELECT * FROM import_batches WHERE import_batch_id = X;)
6) Run prove -v t/db_dependent/ImportBatch.t (have written unit tests for CleanBatch and DeleteBatch)

Sponsored-by: Catalyst IT
Signed-off-by: Liz Rea <liz@catalyst.net.nz>
Catalyst sign off, so needs another one but YAY this is great.

Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 6906 - DBRev 16.06.00.008
Kyle M Hall [Fri, 8 Jul 2016 13:36:32 +0000 (13:36 +0000)]
Bug 6906 - DBRev 16.06.00.008

Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 6906: Follow coding guidelines in terminology.
Alex Sassmannshausen [Mon, 4 Jul 2016 17:22:51 +0000 (19:22 +0200)]
Bug 6906: Follow coding guidelines in terminology.

* Koha/Patron.pm (wantsCheckPrevCheckout, doCheckPrevCheckout): Rename
  to...
  (wants_check_for_previous_checkout, do_check_for_previous_checkout):
  ...this.
* C4/Circulation.pm: Use new names.
* t/db_dependent/Patron/CheckPrevCheckout.t: Renamed to...
* t/db_dependent/Patron/Borrower_PrevCheckout.t: ...this.

Bug 6906: Fix POD reference to old method name.

* Koha/Patron.pm (wants_check_for_previous_checkout): Fix POD.

Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 6906: Add the warning message to the batch checkout
Jonathan Druart [Sun, 12 Jun 2016 10:42:48 +0000 (11:42 +0100)]
Bug 6906: Add the warning message to the batch checkout

Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 6906: Tests - Do not assume CPL exists
Jonathan Druart [Sun, 12 Jun 2016 10:41:41 +0000 (11:41 +0100)]
Bug 6906: Tests - Do not assume CPL exists

Since bug 14878, tests must create the data they need to pass and not
assume they exist.

Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 6906 - show 'Borrower has previously issued...
Alex Sassmannshausen [Fri, 11 Mar 2016 14:00:01 +0000 (15:00 +0100)]
Bug 6906 - show 'Borrower has previously issued...

New feature: provide granular means to configure warnings about items
that have been issued to a particular borrower before, according to
their checkout history.

- Global syspref ('CheckPrevCheckout'), set to 'hardno' by default,
  allows users to enable this feature library wide.
- Per patron category pref allows libraries to create overrides per
  category, falling back on the global setting by default.
- Per patron pref allows switching the functionality on at the level
  of patron. Fall-back to category settings by default.

* Koha/Patron (wantsCheckPrevCheckout, doCheckPrevCheckout): New
  methods.
* C4/Circulation.pm (CanBookBeIssued): Introduce CheckPrevCheckout
  check.
* admin/categories.pl: Pass along checkprevcheckout.
* koha-tmpl/intranet-tmpl/prog/en/modules/admin/categories.tt: Expose
  CheckPrevCheckout per category setting.
* koha-tmpl/intranet-tmpl/prog/en/modules/preferences/patrons.pref:
  Expose CheckPrevCheckout syspref.
* koha-tmpl/intranet-tmpl/prog/en/modules/members/memberentrygen.tt:
  Expose per patron CheckPrevCheckout preference.
* koha-tmpl/intranet-tmpl/prog/en/modules/members/moremember.tt: Expose
  per patron CheckPrevCheckout preference.
* koha-tmpl/intranet-tmpl/prog/en/modules/circ/circulation.tt: Add
  'CHECKPREVCHECKOUT' confirmation message.
* installer/data/mysql/kohastructure.sql: Modify structure of
  'categories', 'borrowers', 'oldborrowers'.
* installer/data/mysql/sysprefs.sql: Add 'CheckPrevCheckout'.
* installer/data/mysql/atomicupdate/checkPrevCheckout.sql: New file.
* t/db_dependent/Patron/CheckPrevCheckout.t: New file with unit tests.

Test plan:
- Apply patch.
- Run updatedatabase.
- Regenerate Koha Schema files.
- Run the unit tests.
- Verify 'CheckPrevCheckout' is visible in Patrons sysprefs and can be
  switched to 'hardyes', 'softyes', 'softno' and 'hardno'.
  + Check out previously checked out items to a patron, checking the
    message appears as expected.
- Verify no 'Check previous checkouts' setting appears on the borrower
  category pages if the syspref is set to a 'hard' option.
- Verify 'Check previous checkouts' setting appears on the borrower
  category pages and can be modified per borrower category.
  + Issue previously issued items to a borrower, checking the message
    appears as expected (This setting should override the default
    setting if that is set to a 'soft' option).
- Verify no 'Check previous checkouts' setting appears on the individual
  borrower pages if the syspref is set to a 'hard' option.
- Verify 'Check previous checkouts' setting appears on individual
  borrower pages and can be modified.
  + Issue previously issued items to a borrower, checking the message
    appears as expected (This setting should override the category
    setting and the default setting if the latter is set to a 'soft'
    option).

Followed test plan, works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 16860: Remove the comment about the warning
Jonathan Druart [Thu, 7 Jul 2016 15:52:10 +0000 (16:52 +0100)]
Bug 16860: Remove the comment about the warning

It is no longer necessary.

Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 16860: Catch warning t/db_dependent/ClassSource.t
Mark Tompsett [Wed, 6 Jul 2016 15:51:40 +0000 (11:51 -0400)]
Bug 16860: Catch warning t/db_dependent/ClassSource.t

$ prove t/db_dependent/ClassSource.t
t/db_dependent/ClassSource.t .. 3/24 attempting to use non-existent class sorting routine routine1
t/db_dependent/ClassSource.t .. ok
All tests successful.
Files=1, Tests=24,  1 wallclock secs ( 0.02 usr  0.00 sys +  0.66 cusr  0.02 csys =  0.70 CPU)
Result: PASS

The above warning might be scary to those unfamiliar with the test.
Add a test to catch the warning.

TEST PLAN
---------
1) prove t/db_dependent/ClassSource.t
   -- as above
2) apply patch
3) prove t/db_dependent/ClassSource.t
   -- no message
4) prove -v t/db_dependent/ClassSource.t
   -- test 13 is the new test
5) run koha qa test tools

Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Workas as advertised

Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 16857: Check on item.branches makes more sense
Jonathan Druart [Thu, 7 Jul 2016 15:40:47 +0000 (16:40 +0100)]
Bug 16857: Check on item.branches makes more sense

The test should be on the existence of the item.branches
method/attribute

Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 16857 - patron-attr-types.tt: Get rid of warnings "Argument "" isn't numeric"
Marc Véron [Mon, 4 Jul 2016 09:37:33 +0000 (11:37 +0200)]
Bug 16857 - patron-attr-types.tt: Get rid of warnings "Argument "" isn't numeric"

To vrify:
- Go to Home > Administration > Patron attribute types
- Make sure you have some patron attribute types with no branches limitation
- For each attribute type you get a warning in intranet-error.log:
patron-attr-types.pl: Argument "" isn't numeric in numeric gt (>) at (...)/koha-tmpl/intranet-tmpl/prog/en/modules/admin/patron-attr-types.tt line 284.

To test:
- Appy patch
- Verify that warnings no longer appear in intranet-error.log

Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 16823 - Comment out koha-rebuild-zebra in koha-common.cron.d
Magnus Enger [Tue, 28 Jun 2016 08:45:08 +0000 (10:45 +0200)]
Bug 16823 - Comment out koha-rebuild-zebra in koha-common.cron.d

Bug 16190 enabled the indexer daemon by default for package installations.
This means that it is no longer necessary to set up koha-rebuild-zebra as
a cron job. This patch comments it out, so that people who might run into
bug 16814 can easily activate the cronjob again after de-activating the
indexer daemon.

To test:
Just read the diff and check that it makes sense.

Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 16803: Add Font Awesome Icons to "Select/Clear all" links to shelves.tt
Hector Castro [Thu, 23 Jun 2016 16:35:24 +0000 (10:35 -0600)]
Bug 16803: Add Font Awesome Icons to "Select/Clear all" links to shelves.tt

Add Font Awesome Icons to "Select/Clear all" links to shelves.tt
(Public and private lists)

To test:
-Apply patch
-Go to More -> Lists
-Create some Public and Private Lists
-See the contents of the list and notice about the new icons in
 "Select/Clear  all"

Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 16795 - Patron categories: Accept integers only for enrolment period and age...
Marc Véron [Wed, 22 Jun 2016 05:57:06 +0000 (07:57 +0200)]
Bug 16795 - Patron categories: Accept integers only for enrolment period and age limits

To test:
- Apply patch
- Clear browser cache
- Go to Home > Administration > Patron categories
- Create or edit a category
- Verify that field 'In months', 'Age required' and 'Upperage limit'
  accept digits only

Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 16794: Group the 2 action buttons into the same column
Jonathan Druart [Sun, 3 Jul 2016 15:07:33 +0000 (16:07 +0100)]
Bug 16794: Group the 2 action buttons into the same column

Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 16794: Revise layout for Admistration > Patron categories
Hector Castro [Wed, 22 Jun 2016 15:22:11 +0000 (09:22 -0600)]
Bug 16794: Revise layout for Admistration > Patron categories

Add Bootstrap buttons and Font Awesome Icons to "Delete" and "Edit" links

To test
- Go to Administration -> Patron categories
 - Confirm that two button appear instead of links for "Edit" and "Delete"
 - Edit an existing category and confirm that works as expected
 - Delete a category and confirm that works properly.

Patch fix it according with QA comment 3
Fix copy and paste according with QA comment 6
Fix column "Default privacy" to be sorted again according with comment 8
Patch set squashed

Buttons appear now as requested in comment #3 (2 buttons, no action menu)

Re-tested, works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 16781: Add Font Awesome Icons to "Select/Clear all" links to modborrows.tt and...
Hector Castro [Mon, 20 Jun 2016 19:12:22 +0000 (13:12 -0600)]
Bug 16781: Add Font Awesome Icons to "Select/Clear all" links to modborrows.tt and result.tt

Add Font Awesome Icons to "Select/Clear all" links to:
modborrows.tt (Batch patron modification) and result.tt (Search results)

To test:

-Apply on top bugs 16469 and 16494
-Goto Batch patron modification
-Create a new batch patron or select one patron list
-See the new icons for "Select all" and "Clear all"
-Do a search and see the new icons in Search results page

Followed test plan, icons display as expected
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 16793: Use Font Awesome for arrows instead of images in audio_alerts.tt
Hector Castro [Tue, 21 Jun 2016 21:19:40 +0000 (15:19 -0600)]
Bug 16793: Use Font Awesome for arrows instead of images in audio_alerts.tt

This changes fit with bug 16148 for marc modification template management

To test
-Apply patch
-Goto Admin->Audio alerts
-Verify that green arrows have disappeared now
 in blue Awesome Icons

Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
https://bugs.koha-community.org/show_bug.cgi?id=16794

Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 16779: Move road type after address in US style address formatting (main address)
Marc Véron [Mon, 20 Jun 2016 13:27:39 +0000 (15:27 +0200)]
Bug 16779: Move road type after address in US style address formatting (main address)

To verify:
- Create a patron with address, streettype, streetnumber defined
- Set syspref 'AddressFormat' to US style
- Go to patron's detail page (in staff client)
- In main address, road type preceeds address (e.g. 25 Drive Euclid)

To test:
- Apply patch
- Refrexh patron's detail page
- Verify that main address displays correctly (e.g. 25 Euclid Drive)

Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 15929 - typo in explanation for MaxSearchResultsItemsPerRecordStatusCheck
Claire Gravely [Mon, 13 Jun 2016 22:25:03 +0000 (00:25 +0200)]
Bug 15929 - typo in explanation for MaxSearchResultsItemsPerRecordStatusCheck

There's a typo in the explanation for the new MaxSearchResultsItemsPerRecordStatusCheck  sys pref that was added in 3.22.2.

"If a record has more than this number of items, they availability statuses ..."

I have re-worded the description so it reads a bit better.

Test plan:
1. Check the description for syspref MaxSearchResultsItemsPerRecordStatusCheck.
2. Apply patch
3. Check syspref MaxSearchResultsItemsPerRecordStatusCheck description
 to make sure it makes sense.

Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 16869: Silence and catch warnings in t/db_dependent/SuggestionEngine_ExplodedTerms.t
Mark Tompsett [Thu, 7 Jul 2016 06:34:28 +0000 (02:34 -0400)]
Bug 16869: Silence and catch warnings in t/db_dependent/SuggestionEngine_ExplodedTerms.t

By properly defining a opachtdocs (intranethtdocs was done too)
in the mock function, uninitialized variable warnings are
eliminated. Given that we can check if $KOHA_CONF is defined or
not, we can catch the warning as part of testing, so the output
of the test is cleaner.

TEST PLAN
---------
1) unset KOHA_CONF
2) prove t/db_dependent/SuggestionEngine_ExplodedTerms.t
   -- lots of noise
3) apply patch
4) prove t/db_dependent/SuggestionEngine_ExplodedTerms.t
   -- no noise
5) prove -v t/db_dependent/SuggestionEngine_ExplodedTerms.t
   -- see the warnings were caught and not just ignored.
6) run koha qa test tools

Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
No warnings. Works as advertised

Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 16562 - Translatability: Issue in opac-user.tt (separated word 'item')
Marc Véron [Sun, 19 Jun 2016 14:40:09 +0000 (16:40 +0200)]
Bug 16562 - Translatability: Issue in opac-user.tt (separated word 'item')

Alternate patch with wording as proposed in comment #12

Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 16807 - Use Koha::BiblioFrameworks instead of GetFrameWorkLoop
Nick Clemens [Fri, 24 Jun 2016 16:04:43 +0000 (12:04 -0400)]
Bug 16807 - Use Koha::BiblioFrameworks instead of GetFrameWorkLoop

Refactor code to use work from 14889

Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 16807: Frameworks unordered in dropdown when adding/editing a biblio
Nick Clemens [Fri, 24 Jun 2016 13:57:07 +0000 (09:57 -0400)]
Bug 16807: Frameworks unordered in dropdown when adding/editing a biblio

To test:
Start to add or edit a biblio
Open the dropdown to change framework
Notice the order
Refresh the page - notice the order changes
Apply patch
Order is alphabetical
Refresh the page
Order does not change

Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works as described

Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 16774: Format date on 'Transfers to receive' page to dateformat system preference
Marc Véron [Sun, 19 Jun 2016 15:43:19 +0000 (17:43 +0200)]
Bug 16774: Format date on 'Transfers to receive' page to dateformat system preference

To test:
- Apply patch
- Go to Home > Circulation > Transfers to receive
- Verify that in title (Transfer made to your library as of...) is
  is formatted as defined in syspref dateformat

Additionaly, the patch changes page title and breadcrumb from:
Home > Circulation > Transfers to your library
to:
Home > Circulation > Transfers to receive
...to make them consistent with the link text on the Circulation home page
   (Transfers to receive)

Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works as advertised

Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 16600 - Remove some obsolete references to Greybox in some templates
Owen Leonard [Thu, 26 May 2016 13:35:26 +0000 (09:35 -0400)]
Bug 16600 - Remove some obsolete references to Greybox in some templates

This patch removes unused Greybox markup from two templates.

To test, apply the patch and go to Authorities.

- Perform an authority search which will return multiple results.
- Select two records to merge.
- On the "merging records" page, an earlier version used Greybox to show
  a preview of the selected authority records. Confirm that authority
  number link for the two records triggers a pop-up window instead.

- From the authorities home page, choose 'New from Z39.50'
- Perform a search which will return multiple results.
- Confirm that there is only a 'MARC' preview link. A
  forever-commented-out 'Card' link has been removed.

Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works as advertised. Obsolete comment on 'Card' removed

Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 15636 - DataTables Warning: Requested unknown parameter from opac-detail.tt
Bouzid Fergani [Tue, 12 Apr 2016 13:27:18 +0000 (09:27 -0400)]
Bug 15636 - DataTables Warning: Requested unknown parameter from opac-detail.tt

Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds the same tests in the aoColumns DT definition than the
ones in the creation of the table. That's sound good.

Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 16859: Fix wrong item field name in export.pl
Marcel de Rooy [Wed, 6 Jul 2016 13:52:54 +0000 (15:52 +0200)]
Bug 16859: Fix wrong item field name in export.pl

Field callnumber should be itemcallnumber.
For completeness, prefixing the joined fields with items table prefix.

Note: You should expect Tools/Export to export only the items within a
given itemcallnumber range, but if the biblio has one item in that
range, the biblionumber is selected for export with ALL items. The script
is designed that way (first select biblio numbers based on criteria, and
run export with those biblio numbers).

Test plan:
[1] Select a biblio N with one item with say itemcallnumber X.
[2] Goto Tools/Export. Select biblio range N,N and no itemcallnumber
    range. The biblio should be exported.
[3] Select biblio range N,N and itemcallnumber range A,B. No output.
[4] Select biblio range N,N and itemcallnumber range A,<empty>. Output.
[5] Select biblio range N,N and itemcallnumber range <empty>,X. Output.

Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 16855 - Poor performance due to high overhead of SQL call in export.pl
Nick Clemens [Tue, 5 Jul 2016 18:49:35 +0000 (14:49 -0400)]
Bug 16855 - Poor performance due to high overhead of SQL call in export.pl

This patch eliminates all columns retrieved in the biblioitems query
except for biblionumber.

To test:
1 - Go to tools->Export data
2 - Export using various filters and note you get expected records
3 - Apply patch
4 - Ensure exported results match results before patch

Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 16854: request.tt: Logic to display messages broken
Marc Véron [Mon, 4 Jul 2016 01:48:40 +0000 (03:48 +0200)]
Bug 16854: request.tt: Logic to display messages broken

This patch fixes broken logic in
koha-tmpl/intranet-tmpl/prog/en/modules/reserve/request.tt

To verify, see initial comment.

To test:
- Apply patch
- Have a patron with a restricion and with outstanding fines
  greater than defined in syspref 'maxoutstanding'
- Place a hold for this patron and verify, that messages
  'Patron has restrictions' and 'Patron has outstanding fines...'
  appear

Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 16780 - Specify due date always sets time as AM when using 12 hour time format
Kyle M Hall [Fri, 24 Jun 2016 10:35:25 +0000 (10:35 +0000)]
Bug 16780 - Specify due date always sets time as AM when using 12 hour time format

This regression is occurs because the time format for the checkout
date/time widget is only meant to be given in 24 hour format. The time
due should not be converted to 12 hr time even if the library has 12
hour set as their preferred time format.

Test Plan:
1) Performat a backdated checkout with a date due that has a PM time
2) Note the date/time picker on the confirmition screen shows the time
   in AM/PM
2) Note the time is not stored correctly
3) Apply this patch
4) Repeate step 1
5) Note the confirmation date/time picker now show the time in 24hr
   format
6) Note the time was stored correctly

Signed-off-by: Claire Gravely <c.gravely@arts.ac.uk>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 16762: Record matching rules: Remove match check link removes too much
Owen Leonard [Fri, 17 Jun 2016 15:33:41 +0000 (11:33 -0400)]
Bug 16762: Record matching rules: Remove match check link removes too much

My patch for Bug 5006 introduced a lot of markup changes to the record
matching rules template. I missed a change in one are though, which
caused a bug with the way the 'Remove match check' link works.

To reproduce:

- Go to Administration -> Record matching rules.
- Edit a matching rule which includes at least one match check.
- Click a 'Remove match check' link. The entire "Required match checks"
  block is removed.

To test, apply the patch and repeat the steps above. Clicking any
'Remove match check' link should remove only the corresponding rule.

Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works as advertised

Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 16760: fix Circulation Statistics wizard under Plack
Galen Charlton [Tue, 5 Jul 2016 16:22:39 +0000 (16:22 +0000)]
Bug 16760: fix Circulation Statistics wizard under Plack

This patch fixes some variable scoping problems when running
the circulation statistics wizard under Plack.  For example,
when using the item type as a row header, with this patch the
item type description is displayed rather than "UKNOWN VALUE".

This patch also enables warnings and fixes a couple variable
initialization issues. (Note that turning on warnings across
the board would make it easier to identify Plack variable scoping
issues, as "Variable "$foo" is not available at' errors would
be recorded in the Plack error log).

To test
-------
[1] Run the staff interface under Plack.
[2] Go to the Circulation Statistics Wizard and run a report
    using item type as the row. Note that the row labels
    display as "UNKNOWN VALUE" rather than the item type.
[3] Apply the patch and restart Plack.
[4] Run step #2 again; this time, the item type descriptions should
    be used as the row labels.

Signed-off-by: Galen Charlton <gmcharlt@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 16671: [QA Follow-up] Replace remaining itemtype lines
Marcel de Rooy [Tue, 28 Jun 2016 13:21:53 +0000 (15:21 +0200)]
Bug 16671: [QA Follow-up] Replace remaining itemtype lines

Instead of relying on existing data, we use new TestBuilder recs.

Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 16671: [QA Follow-up] Add new itemtype and remove bailout
Marcel de Rooy [Mon, 27 Jun 2016 07:24:14 +0000 (09:24 +0200)]
Bug 16671: [QA Follow-up] Add new itemtype and remove bailout

No need to bail out, if we are using TestBuilder.
Somehow, this test passes with me if we add a new record, and if
we do not, it fails (using BK as the first itemtype with notforloan
is 0).

Looking further, we should imo remove the Koha::ItemTypes searches
here and not depend on existing data. Just add some item types.

Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 16671: (bug 14828 follow-up) Pick the right itemtypes
Jonathan Druart [Mon, 6 Jun 2016 13:00:56 +0000 (14:00 +0100)]
Bug 16671: (bug 14828 follow-up) Pick the right itemtypes

Looking at commit aafe73eefb5151454fa8957bf188768324d23955
  Bug 14828: Use Koha::ItemType[s] everywhere C4::ItemType was used
-my @item_types = C4::ItemType->all;
-my @for_loan = grep { $_->{notforloan} == 0 } @item_types
-  or BAIL_OUT("No adequate itemtype");
-my $itemtype = $for_loan[0]->{itemtype};
+my $itemtype = Koha::ItemTypes->search({ notforloan => 1 })->next;
+$itemtype or BAIL_OUT("No adequate itemtype"); #FIXME Should be $itemtype = $itemtype->itemtype

It seems that the tests expect itemtypes for loan.

Test plan:
  prove t/db_dependent/HoldsQueue.t
should still return green

Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works as advertised. No qa test tool errors

Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Adding follow-up.

Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 16459: Add patron to a patron card requires catalogue permission
Jonathan Druart [Fri, 6 May 2016 14:55:31 +0000 (15:55 +0100)]
Bug 16459: Add patron to a patron card requires catalogue permission

Currently, serials => 'routing' is required, which does not make any
sense.
It's a copy/paste error when this file has been created (you can blame
me).

Note that I am not sure catalogue is the correct permission, but it's
the one used almost everywhere in this module

Test plan:
Confirm that catalogue is enough to search for patrons to add to a
patron card.

Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 16431: Use Koha::Cache to cache marc subfield structure
Jonathan Druart [Tue, 3 May 2016 13:34:33 +0000 (14:34 +0100)]
Bug 16431: Use Koha::Cache to cache marc subfield structure

The marc subfield structure is currently cached using a global variable
of C4::Context. The infos are retrieved every time a new context is
created.
This patch suggests to use Koha::Cache instead.

To achieve this goal, a new subroutine is created
C4::Biblio::GetMarcSubfieldStructure, it will be called from code which
needs to get the marc subfield structure. GetMarcFromKohaField,
GetMarcSubfieldStructureFromKohaField, TransformKohaToMarc and
_get_inverted_marc_field_map are modified accordingly and the cache is cleared
when the table is updated (from the 3 pl scripts modified by this patch).

The caching done in C4::Context (marcfromkohafield) is removed.

Test plan:
Play with the marc subfield structure (in the administration module),
then add and edit records and make sure everything went fine.

Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Everything works as expected on my functional tests. I'm really happy to see the
patch introduces relevant tests for previously untested functions.

Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 14968 - Provides unit test
Alex Arnaud [Wed, 15 Jun 2016 14:11:07 +0000 (16:11 +0200)]
Bug 14968 - Provides unit test

Signed-off-by: Broust <jean-manuel.broust@univ-lyon2.fr>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 14968 - found shouldn't be set to null when cancelling holds
Lyon3 Team [Tue, 6 Oct 2015 13:42:15 +0000 (15:42 +0200)]
Bug 14968 - found shouldn't be set to null when cancelling holds

Signed-off-by: JM Broust <jean-manuel.broust@univ-lyon2.fr>
Signed-off-by: Broust <jean-manuel.broust@univ-lyon2.fr>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 12509 - Fix Untranslatable Restriction added by overdues process
Morgane Alonso [Mon, 6 Jun 2016 12:24:56 +0000 (12:24 +0000)]
Bug 12509 - Fix Untranslatable Restriction added by overdues process

Changes the value of the "comment" column in "borrower_debarments" table
from "Restriction added by overdues process yyyy-mm-dd hh:mm:ss" to
"OVERDUE_PROCESS yyyy-mm-dd hh:mm:ss" in the overdue_notices.pl. Then in
the templates "moremember.tt", "circulation.tt", "memberentrygen.tt",
"opac-reserve.tt" and "opac-user.tt" the value of "comment" is
check, if it's an automatical comment due to overdue process it'll
write "Restriction added by overdues process yyyy-mm-dd hh:mm:ss",
then if there is a customizable comment it will be written without
modification. Like this, the comment "Restriction added by overdues
process" is written in the po files and can be translated later.

To test:
1) create a patron with automatical restriction due to overdue process;
2) apply patch;
3) run misc/cronjobs/overdue_notices.pl;
4) verify if the comment "Restriction added by overdues process" is well
   written and translatable on the following page :
    - opac patron home page (opac-user.tt);
    - opac item reservation page (opac-reserve.tt);
    - pro patron page (moremember.tt);
    - reservation item for a patron (circulation.tt, memberentrygen.tt);
5) try to translate the comment in po files;
6) sign off.

Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 3534 - DBRev 16.06.00.007
Kyle M Hall [Thu, 7 Jul 2016 18:36:25 +0000 (18:36 +0000)]
Bug 3534 - DBRev 16.06.00.007

Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 3534: Force margin-left: 0 for second button
Jonathan Druart [Thu, 7 Jul 2016 14:36:47 +0000 (15:36 +0100)]
Bug 3534: Force margin-left: 0 for second button

When quick adding a new patron, both button are in the DOM and the
second button has a margin-left (from .btn-toolbar > .btn + .btn).
This patch force the margin-left to 0 to avoid the button to move when
toggling them.

Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 3534 (QA Followup) Rebase and change floating save
Nick Clemens [Tue, 28 Jun 2016 16:57:00 +0000 (12:57 -0400)]
Bug 3534 (QA Followup) Rebase and change floating save

Bug 3534 - (QA Followup) Use single toolbar for regular/quickadd forms

Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 3534 (QA Followup) Fix indentation, show guarantor form, ignore bad data in pref
Nick Clemens [Wed, 8 Jun 2016 17:39:02 +0000 (13:39 -0400)]
Bug 3534 (QA Followup) Fix indentation, show guarantor form, ignore bad data in pref

Switch incorrect == to != when checking skipped fields

Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 3534 - QA Followup - use floating save
Nick Clemens [Wed, 11 May 2016 15:17:12 +0000 (11:17 -0400)]
Bug 3534 - QA Followup - use floating save

I am not sure if this is desired, it makes sense for consistency but
floats in a wierd place for a short form.

Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 3534 - Patron quick add form
Nick Clemens [Fri, 4 Mar 2016 21:34:07 +0000 (21:34 +0000)]
Bug 3534 - Patron quick add form

This patch adds a new system preference:
    PatronQuickAddFields

When either this pref or BorrowerMandatoryField is populated this will add a new dropdown to the bew patron toolbar.
When a category is chosen from this dropdown the fields in PatronQuickAddFields and BorrowerMandatoryField will be displayed.
There will be a button allowing a user to switch from the quickadd to the full form and fields will be copied between the forms when toggling.

The Quick add will only be displayed on add of a new patron, future edits should display the full form.

Test plan:
 1 - Apply patch
 2 - run updatedatabase.pl
 3 - Add a new patron and ensure nothing has changed
 4 - Populate either PatronQuickAddFields or BorrowerMandatory fields
 and note the new button for adding a patron
 5 - Click the Quick add and choose a type
 6 - Only required or quick add fields should be displayed
 7 - Verify toggling forms copies information
 8 - Ensure you cannot save patron without filling required fields
 (quick add fields should be optional)
 9 - Ensure you can save patron with fields filled out
10 - Ensure that a duplicate patron brings up the duplicate/add new
buttons with full form displayed
11 - Verify that subsequent edits use only full form
12 - Verify that data on form submitted is the data saved to patron
13 - Test with various values in both MandatoryBorrowerFields and PatronQuickAddFields

Sponsored by: VOKAL (Vermont Organization of Koha Automated Libraries)

Followed test plan, works as expected.
Re-tested together with followup, works as expected (2016-06-02)
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 14048: (RM followup) DB version 16.06.00.006
Jesse Weaver [Thu, 7 Jul 2016 17:02:53 +0000 (11:02 -0600)]
Bug 14048: (RM followup) DB version 16.06.00.006

Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
8 years agoBug 14048: (QA followup) Default to 1 if no default rule
Tomas Cohen Arazi [Mon, 27 Jun 2016 13:17:20 +0000 (10:17 -0300)]
Bug 14048: (QA followup) Default to 1 if no default rule

This patch answers Jonathan's request to simplify this patchset a bit.

It removes the need for the .sql file, as _default_rule now defaults to
a fixed value (1, which was set by the removed .sql file).
This allowed to remove the overloaded ->delete method.

The tests have been adjusted to reflect this changes, including tests for
the new 'default'-if-absent situation.

Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
8 years agoBug 14048: Use mock_preference in tests
Jonathan Druart [Sun, 26 Jun 2016 07:19:12 +0000 (08:19 +0100)]
Bug 14048: Use mock_preference in tests

Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
8 years agoBug 14048: (QA folloup) C4::Context->preference should be used
Tomas Cohen Arazi [Sat, 25 Jun 2016 15:37:15 +0000 (12:37 -0300)]
Bug 14048: (QA folloup) C4::Context->preference should be used

Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
8 years agoBug 14048: (followup) Use the original holding branch
Tomas Cohen Arazi [Tue, 21 Jun 2016 18:18:51 +0000 (15:18 -0300)]
Bug 14048: (followup) Use the original holding branch

This patch picks the item's holding branch *before* it gets fixed
by using the checkin library instead. This way the RefundLostOnReturnControl
syspref set to ItemHoldingBranch is respected (otherwise, as Nick explained
this behaves just like if CheckinLibrary was set)

Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jason Robb <jrobb@sekls.org>
Signed-off-by: Jennifer Schmidt <jschmidt@switchinc.org>
Signed-off-by: Margaret Thrasher <p.thrasher@dover.nh.gov>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
8 years agoBug 14048: (QA followup) Fix typo on syspref value
Tomas Cohen Arazi [Fri, 17 Jun 2016 13:33:22 +0000 (10:33 -0300)]
Bug 14048: (QA followup) Fix typo on syspref value

Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jason Robb <jrobb@sekls.org>
Signed-off-by: Jennifer Schmidt <jschmidt@switchinc.org>
Signed-off-by: Margaret Thrasher <p.thrasher@dover.nh.gov>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
8 years agoBug 14048: (QA followup) Update syspref name for HEA
Tomas Cohen Arazi [Wed, 15 Jun 2016 19:18:38 +0000 (16:18 -0300)]
Bug 14048: (QA followup) Update syspref name for HEA

Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jason Robb <jrobb@sekls.org>
Signed-off-by: Jennifer Schmidt <jschmidt@switchinc.org>
Signed-off-by: Margaret Thrasher <p.thrasher@dover.nh.gov>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
8 years agoBug 14048 [QA Followup] - Delete only the removed system preference
Kyle M Hall [Mon, 13 Jun 2016 11:17:42 +0000 (11:17 +0000)]
Bug 14048 [QA Followup] - Delete only the removed system preference

Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jason Robb <jrobb@sekls.org>
Signed-off-by: Jennifer Schmidt <jschmidt@switchinc.org>
Signed-off-by: Margaret Thrasher <p.thrasher@dover.nh.gov>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
8 years agoBug 14048: Add syspref and atomic update
Tomas Cohen Arazi [Fri, 3 Jun 2016 14:24:07 +0000 (11:24 -0300)]
Bug 14048: Add syspref and atomic update

This patch introduces the changes to the sysprefs and the atomic update
that creates the new table.

It picks the syspref value for RefundLostItemFeeOnReturn and uses it to
create a default (branchcode='*') rule on the new table.

Sponsored-by: DoverNet
Sponsored-by: South-East Kansas Library System
Sponsored-by: SWITCH Library Consortium
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jason Robb <jrobb@sekls.org>
Signed-off-by: Jennifer Schmidt <jschmidt@switchinc.org>
Signed-off-by: Margaret Thrasher <p.thrasher@dover.nh.gov>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
8 years agoBug 14048: [QA Followup]
Kyle M Hall [Thu, 9 Jun 2016 16:48:07 +0000 (16:48 +0000)]
Bug 14048: [QA Followup]

Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jason Robb <jrobb@sekls.org>
Signed-off-by: Jennifer Schmidt <jschmidt@switchinc.org>
Signed-off-by: Margaret Thrasher <p.thrasher@dover.nh.gov>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
8 years agoBug 14048: Hook new rules into C4::Circulation
Tomas Cohen Arazi [Fri, 3 Jun 2016 14:26:42 +0000 (11:26 -0300)]
Bug 14048: Hook new rules into C4::Circulation

This patch makes AddIssue and AddReturn use the new implementation

The behaviour should respect the specification.

Sponsored-by: DoverNet
Sponsored-by: South-East Kansas Library System
Sponsored-by: SWITCH Library Consortium
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jason Robb <jrobb@sekls.org>
Signed-off-by: Jennifer Schmidt <jschmidt@switchinc.org>
Signed-off-by: Margaret Thrasher <p.thrasher@dover.nh.gov>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
8 years agoBug 14048: Add a refund rules setting form in smart-rules
Tomas Cohen Arazi [Fri, 3 Jun 2016 14:26:11 +0000 (11:26 -0300)]
Bug 14048: Add a refund rules setting form in smart-rules

This patch introduces the CRUD UI for managing the refund lost item fee
rules on the general 'Circulation and fines rules' page.

Verify that rules can be added and changed.

Rules are correctly associated to the chosen branch (or the
general default rule).

To test:
- Apply the patch
- Open smart-rules.pl
=> SUCCESS: The text and refund rules section correctly refers to default global rules.
   The policy can be set to Yes and No, and works as expected.
- Pick a specific branch
=> SUCCESS: The rule refers to the specific branch
=> SUCCESS: It detects the default rule is picked
=> SUCCESS: On changing the rules values are correctly retrieved if entering
   again to the page.
=> SUCCESS: The 'Use default' text is suffixed with the correct value set by the user
   in the 'All libraries' scenario.
=> Sign off :-D

Sponsored-by: DoverNet
Sponsored-by: South-East Kansas Library System
Sponsored-by: SWITCH Library Consortium
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jason Robb <jrobb@sekls.org>
Signed-off-by: Jennifer Schmidt <jschmidt@switchinc.org>
Signed-off-by: Margaret Thrasher <p.thrasher@dover.nh.gov>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
8 years agoBug 14048: Unit tests
Tomas Cohen Arazi [Fri, 3 Jun 2016 14:25:15 +0000 (11:25 -0300)]
Bug 14048: Unit tests

This patch introduces unit tests for the feature.
To test:
- Have all patches from this bug applied
- Run:
  $ prove -v t/db_dependent/RefundLostItemFeeRule.t
=> SUCCESS: All tests pass!

Sponsored-by: DoverNet
Sponsored-by: South-East Kansas Library System
Sponsored-by: SWITCH Library Consortium
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jason Robb <jrobb@sekls.org>
Signed-off-by: Jennifer Schmidt <jschmidt@switchinc.org>
Signed-off-by: Margaret Thrasher <p.thrasher@dover.nh.gov>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
8 years agoBug 14048: Add RefundLostItemFeeRule table and classes
Tomas Cohen Arazi [Fri, 3 Jun 2016 14:23:20 +0000 (11:23 -0300)]
Bug 14048: Add RefundLostItemFeeRule table and classes

This patch introduces new classes for handling refund lost item fee
rules. It introduces a new table for storing this rules.

It is designed so it is possible to define a global rule, and then
branch-specific ones. The specific is prefered if available.

This behaviour is fully tested by unit tests introduced by the following patches.

This cannot be tested on its own.

Sponsored-by: DoverNet
Sponsored-by: South-East Kansas Library System
Sponsored-by: SWITCH Library Consortium
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jason Robb <jrobb@sekls.org>
Signed-off-by: Jennifer Schmidt <jschmidt@switchinc.org>
Signed-off-by: Margaret Thrasher <p.thrasher@dover.nh.gov>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
8 years agoBug 16772 - Change label from 'For:' to 'Library:' to ease translation
Marc Véron [Sun, 19 Jun 2016 16:10:06 +0000 (18:10 +0200)]
Bug 16772 - Change label from 'For:' to 'Library:' to ease translation

This patch changes the label from "For:" to "Library:" in the
acquisition information filter on the suggestions page in staff client.

To test:
- Apply patch
- Go to Home > Acquisitions > Suggestions management
- Verify that label reads as appropriate (in filter
  Acquisition information)

Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 16770: Remove 2 other occurrences of libmemoize-memcached-perl
Jonathan Druart [Tue, 21 Jun 2016 11:36:38 +0000 (12:36 +0100)]
Bug 16770: Remove 2 other occurrences of libmemoize-memcached-perl

Signed-off-by: Jacek Ablewicz <abl@biblos.pk.edu.pl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>