]> git.koha-community.org Git - koha.git/log
koha.git
8 years agoBug 11592: Updated License Text and use Modern::Perl
Mark Tompsett [Fri, 24 Jan 2014 03:31:08 +0000 (22:31 -0500)]
Bug 11592: Updated License Text and use Modern::Perl

Why not clean up the License Agreement stuff while the files
are being changed? Used the current one found at:
http://wiki.koha-community.org/wiki/Coding_Guidelines#Licence

Changed the strict and warning lines into just a Modern::Perl.

Signed-off-by: Robin Sheat <robin@catalyst.net.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 11921: (QA followup) Remove remaining unused var
Tomas Cohen Arazi [Wed, 7 Sep 2016 14:37:24 +0000 (11:37 -0300)]
Bug 11921: (QA followup) Remove remaining unused var

This patch removes an occurence of an unused var in Context.pm and
also prevents a warning if memcached_servers is not set:

Use of uninitialized value in split at /home/vagrant/kohaclone/Koha/Cache.pm line 91.

t also tidies small things.

Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 11921: Fix logic in C4::Context->new to init the config
Jonathan Druart [Tue, 6 Sep 2016 14:20:28 +0000 (15:20 +0100)]
Bug 11921: Fix logic in C4::Context->new to init the config

Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 11921: C4::Context->memcached does no longer exist
Jonathan Druart [Tue, 6 Sep 2016 14:20:25 +0000 (15:20 +0100)]
Bug 11921: C4::Context->memcached does no longer exist

Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 11921: Update remaining occurrences of ->ismemcached
Jonathan Druart [Thu, 23 Jun 2016 05:33:23 +0000 (06:33 +0100)]
Bug 11921: Update remaining occurrences of ->ismemcached

TODO: Would be better to provide a better way to know if memcache is correctly set
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 11921: Restore memcached infos to koha-conf - Koha::Config
Jonathan Druart [Thu, 23 Jun 2016 04:12:39 +0000 (05:12 +0100)]
Bug 11921: Restore memcached infos to koha-conf - Koha::Config

Move C4::Context->read_config_file to Koha::Config
That permits to reuse it from Koha::Cache without needing C4::Context
(and introduce a circular deps).

TODO: Add decent POD to Koha::Config
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 11921: Restore memcached infos to koha-conf
Jonathan Druart [Wed, 22 Jun 2016 15:53:32 +0000 (16:53 +0100)]
Bug 11921: Restore memcached infos to koha-conf

MEMCACHED_SERVERS and MEMCACHED_NAMESPACE should be moved back to
koha-conf instead of an ENV var to let command line scripts use
the cache mechanism.

TODO:
- Add the entries to koha-conf.xml
- Remove occurrences of MEMCACHED_SERVERS in package, apache and plack files

Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 17189: Use Koha::Caches instead of Koha::Cache in Koha::MetaSearcher
Jonathan Druart [Wed, 7 Sep 2016 11:03:00 +0000 (12:03 +0100)]
Bug 17189: Use Koha::Caches instead of Koha::Cache in Koha::MetaSearcher

Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
https://bugs.koha-community.org/show_bug.cgi?id=11921

Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 17189: Replace occurrences of 'use Koha::Cache'
Jonathan Druart [Wed, 7 Sep 2016 10:58:05 +0000 (11:58 +0100)]
Bug 17189: Replace occurrences of 'use Koha::Cache'

Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
https://bugs.koha-community.org/show_bug.cgi?id=11921

Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 17189: Use delete to flush a L1 cache namespace
Jonathan Druart [Wed, 7 Sep 2016 10:43:32 +0000 (11:43 +0100)]
Bug 17189: Use delete to flush a L1 cache namespace

Signed-off-by: Jacek Ablewicz <abl@biblos.pk.edu.pl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
https://bugs.koha-community.org/show_bug.cgi?id=11921

Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 17189: Add the ability to define several memcached namespaces - replace existing...
Jonathan Druart [Wed, 22 Jun 2016 15:02:08 +0000 (16:02 +0100)]
Bug 17189: Add the ability to define several memcached namespaces - replace existing occurrences

s/Koha::Cache->get_instance/Koha::Caches->get_instance

Signed-off-by: Jacek Ablewicz <abl@biblos.pk.edu.pl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
https://bugs.koha-community.org/show_bug.cgi?id=11921

Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 17189: Add the ability to define several memcached namespaces - Koha::Caches
Jonathan Druart [Wed, 22 Jun 2016 15:01:46 +0000 (16:01 +0100)]
Bug 17189: Add the ability to define several memcached namespaces - Koha::Caches

We need to define several namespaces for our cache system.
For instance sysprefs, koha conf (koha-conf.xml) and unit tests
should be defined in a separate namespace.
This will permit to
- launch the tests without interfering with other cache values
- and flush the sysprefs cache without flushing all other values

To do so, we need to store different Koha::Cache objects at a package
level. That's why this patch adds a new Koha::Caches module.

FIXME: There is an architecture problem here: the L1 cache should be
defined in Koha::Cache

Signed-off-by: Jacek Ablewicz <abl@biblos.pk.edu.pl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
https://bugs.koha-community.org/show_bug.cgi?id=11921

Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 17189: Add the ability to define several memcached namespaces - tests
Jonathan Druart [Wed, 22 Jun 2016 15:10:23 +0000 (16:10 +0100)]
Bug 17189: Add the ability to define several memcached namespaces - tests

Signed-off-by: Jacek Ablewicz <abl@biblos.pk.edu.pl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
https://bugs.koha-community.org/show_bug.cgi?id=11921

Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 16573 - Update Schema
Kyle M Hall [Tue, 6 Sep 2016 09:37:14 +0000 (09:37 +0000)]
Bug 16573 - Update Schema

Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 14695 [QA Followup] - Fix issues found by QA script
Kyle M Hall [Sat, 3 Sep 2016 00:26:03 +0000 (00:26 +0000)]
Bug 14695 [QA Followup] - Fix issues found by QA script

8 years agoBug 14695 [QA Followup] - Unit Tests
Kyle M Hall [Fri, 2 Sep 2016 10:34:57 +0000 (10:34 +0000)]
Bug 14695 [QA Followup] - Unit Tests

8 years agoBug 14695 [QA Followup] - Tell librarian if item doesn't allow or forces item level...
Kyle M Hall [Thu, 16 Jun 2016 11:53:28 +0000 (11:53 +0000)]
Bug 14695 [QA Followup] - Tell librarian if item doesn't allow or forces item level holds in the OPAC

8 years agoBug 14695 [QA Followup] - Disable "Holds to place (count)" unless "Hold next availabl...
Kyle M Hall [Fri, 29 Apr 2016 17:34:48 +0000 (17:34 +0000)]
Bug 14695 [QA Followup] - Disable "Holds to place (count)" unless "Hold next available item" is checked

Signed-off-by: Jason M. Burds <JBurds@dubuque.lib.ia.us>
Signed-off-by: Benjamin Rokseth <benjamin.rokseth@kul.oslo.kommune.no>
8 years agoBug 14695: Fix typo in template
Julian Maurice [Tue, 19 Apr 2016 10:06:44 +0000 (12:06 +0200)]
Bug 14695: Fix typo in template

Signed-off-by: Jason M. Burds <JBurds@dubuque.lib.ia.us>
Signed-off-by: Benjamin Rokseth <benjamin.rokseth@kul.oslo.kommune.no>
8 years agoBug 14695 [QA Followup] - Fix method names 'type' to '_type'
Kyle M Hall [Mon, 18 Apr 2016 14:18:07 +0000 (14:18 +0000)]
Bug 14695 [QA Followup] - Fix method names 'type' to '_type'

Signed-off-by: Jason M. Burds <JBurds@dubuque.lib.ia.us>
Signed-off-by: Benjamin Rokseth <benjamin.rokseth@kul.oslo.kommune.no>
8 years agoBug 14695 - Don't use holds_to_place_count when checking an item.
Alex Arnaud [Thu, 28 Jan 2016 09:41:27 +0000 (10:41 +0100)]
Bug 14695 - Don't use holds_to_place_count when checking an item.

This fix the following bug:
If you select 2 in "Holds to place (count)" and finally
check an item, so you get 2 holds for the same item.

Signed-off-by: Jason M. Burds <JBurds@dubuque.lib.ia.us>
Signed-off-by: Benjamin Rokseth <benjamin.rokseth@kul.oslo.kommune.no>
8 years agoBug 14695 - Warn librarian if max_holds_per_record is reached
Alex Arnaud [Wed, 27 Jan 2016 15:48:02 +0000 (16:48 +0100)]
Bug 14695 - Warn librarian if max_holds_per_record is reached

Signed-off-by: Jason M. Burds <JBurds@dubuque.lib.ia.us>
Signed-off-by: Benjamin Rokseth <benjamin.rokseth@kul.oslo.kommune.no>
8 years agoBug 14695 [QA Followup] - Fix clearing of all holds by patron at checkout
Kyle M Hall [Fri, 22 Jan 2016 15:25:20 +0000 (15:25 +0000)]
Bug 14695 [QA Followup] - Fix clearing of all holds by patron at checkout

Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jason M. Burds <JBurds@dubuque.lib.ia.us>
Signed-off-by: Benjamin Rokseth <benjamin.rokseth@kul.oslo.kommune.no>
8 years agoBug 14695 [QA Followup] - Make existing unit tests pass
Kyle M Hall [Tue, 19 Jan 2016 17:49:44 +0000 (17:49 +0000)]
Bug 14695 [QA Followup] - Make existing unit tests pass

* Removes tests no longer needed
* Updates rules to work with existing tests
* Fixes code issues revealed by unit tests

Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jason M. Burds <JBurds@dubuque.lib.ia.us>
Signed-off-by: Benjamin Rokseth <benjamin.rokseth@kul.oslo.kommune.no>
8 years agoBug 14695 [QA Followup] - Filling one hold fills all of them
Kyle M Hall [Tue, 19 Jan 2016 17:10:29 +0000 (17:10 +0000)]
Bug 14695 [QA Followup] - Filling one hold fills all of them

Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jason M. Burds <JBurds@dubuque.lib.ia.us>
Signed-off-by: Benjamin Rokseth <benjamin.rokseth@kul.oslo.kommune.no>
8 years agoBug 14695 - Add ability to place multiple item holds on a given record per patron
Kyle M Hall [Tue, 29 Dec 2015 19:14:19 +0000 (19:14 +0000)]
Bug 14695 - Add ability to place multiple item holds on a given record per patron

Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jason M. Burds <JBurds@dubuque.lib.ia.us>
Signed-off-by: Benjamin Rokseth <benjamin.rokseth@kul.oslo.kommune.no>
8 years agoBug 14695 - Tidy C4::Reserves::CanItemBeReserved
Kyle M Hall [Mon, 28 Dec 2015 17:11:46 +0000 (17:11 +0000)]
Bug 14695 - Tidy C4::Reserves::CanItemBeReserved

Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jason M. Burds <JBurds@dubuque.lib.ia.us>
Signed-off-by: Benjamin Rokseth <benjamin.rokseth@kul.oslo.kommune.no>
8 years agoBug 14695 - Add new circulation rule
Kyle M Hall [Tue, 29 Dec 2015 19:13:51 +0000 (19:13 +0000)]
Bug 14695 - Add new circulation rule

Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jason M. Burds <JBurds@dubuque.lib.ia.us>
Signed-off-by: Benjamin Rokseth <benjamin.rokseth@kul.oslo.kommune.no>
8 years agoBug 14695 - Update DB Schema file
Kyle M Hall [Tue, 29 Dec 2015 19:13:25 +0000 (19:13 +0000)]
Bug 14695 - Update DB Schema file

Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jason M. Burds <JBurds@dubuque.lib.ia.us>
Signed-off-by: Benjamin Rokseth <benjamin.rokseth@kul.oslo.kommune.no>
8 years agoBug 14695 - Update database
Kyle M Hall [Tue, 29 Dec 2015 19:11:47 +0000 (19:11 +0000)]
Bug 14695 - Update database

Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jason M. Burds <JBurds@dubuque.lib.ia.us>
Signed-off-by: Benjamin Rokseth <benjamin.rokseth@kul.oslo.kommune.no>
8 years agoBug 11360 - Fix merge conflict
Kyle M Hall [Sat, 3 Sep 2016 00:17:20 +0000 (00:17 +0000)]
Bug 11360 - Fix merge conflict

Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 13501: Fix behavior of 'Delete subfield' button on select2 controls
Julian Maurice [Fri, 19 Aug 2016 13:26:11 +0000 (15:26 +0200)]
Bug 13501: Fix behavior of 'Delete subfield' button on select2 controls

Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 13501: Highlight select2 control if field is required and value is missing
Julian Maurice [Fri, 19 Aug 2016 11:48:13 +0000 (13:48 +0200)]
Bug 13501: Highlight select2 control if field is required and value is missing

Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 13501: Move "Required" and checkbox after input/select
Julian Maurice [Fri, 30 Oct 2015 12:49:56 +0000 (13:49 +0100)]
Bug 13501: Move "Required" and checkbox after input/select

Signed-off-by: Aleisha <aleishaamohia@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 13501: Indentation fix (batchMod-edit.tt)
Julian Maurice [Fri, 30 Oct 2015 12:45:13 +0000 (13:45 +0100)]
Bug 13501: Indentation fix (batchMod-edit.tt)

Signed-off-by: Aleisha <aleishaamohia@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 13501: Add JS library select2 3.5.4
Julian Maurice [Tue, 30 Dec 2014 13:40:44 +0000 (14:40 +0100)]
Bug 13501: Add JS library select2 3.5.4

use it on cataloguing and batch items edit pages

Signed-off-by: Aleisha <aleishaamohia@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 10848 - Fix DBRev description
Kyle M Hall [Fri, 2 Sep 2016 16:18:38 +0000 (16:18 +0000)]
Bug 10848 - Fix DBRev description

Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 11360 [QA Followup] - Fix styles and button order
Kyle M Hall [Wed, 20 Jul 2016 15:58:20 +0000 (15:58 +0000)]
Bug 11360 [QA Followup] - Fix styles and button order

Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 11360 - Disable barcode field and submit button when a hold is found
Kyle M Hall [Wed, 18 Nov 2015 18:53:03 +0000 (18:53 +0000)]
Bug 11360 - Disable barcode field and submit button when a hold is found

At the moment when scanning in returns, it can be easy to miss a hold
trap due to the fact that the barcode and submit are still active and
the barcode field is focused on. A librarian who is focused on scanning
can easily scan another item and pass over the form, which is equivalent
to clicking the "ignore" button.

Test Plan:
1) Apply this patch
2) Trap a hold, note the new modal
3) Check the hold in a second time
4) Note the new modal
5) For each modal, test each button

Signed-off-by: Christopher Brannon <cbrannon@cdalibrary.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
8 years agoBug 7045 - DBRev 16.06.00.017
Kyle M Hall [Fri, 2 Sep 2016 16:09:23 +0000 (16:09 +0000)]
Bug 7045 - DBRev 16.06.00.017

Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 7045 - DBRev 16.06.00.016
Kyle M Hall [Fri, 2 Sep 2016 16:04:09 +0000 (16:04 +0000)]
Bug 7045 - DBRev 16.06.00.016

Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 10848 - [QA Followup] Add missing branch option and fix pattern for copyrightdate
Jacek Ablewicz [Fri, 12 Aug 2016 09:42:48 +0000 (11:42 +0200)]
Bug 10848 - [QA Followup] Add missing branch option and fix pattern for copyrightdate

- HTML5 input pattern for copyrightdate was not taking into an account
the database field type, which is smallint(5)
- added title="..." for the year field so the acceptable date format
should be displayed as a hint/tooltip in the browser
- added an missing option for configuring branch/library as mandatory

Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 10848 - Allow configuration of mandatory/required fields on the suggestion form...
Jacek Ablewicz [Fri, 5 Aug 2016 09:01:25 +0000 (11:01 +0200)]
Bug 10848 - Allow configuration of mandatory/required fields on the suggestion form in OPAC - part 2

Add 'OPACSuggestionMandatoryFields' syspref definition plus
an atomic DB update for the new preference.

Signed-off-by: barbara johnson <barbara.johnson@bedfordtx.gov>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 10848 - Allow configuration of mandatory/required fields on the suggestion form...
Jacek Ablewicz [Fri, 5 Aug 2016 08:47:11 +0000 (10:47 +0200)]
Bug 10848 - Allow configuration of mandatory/required fields on the suggestion form in OPAC

This patch adds a configuration option which allows to define which
fields should be mandatory for a patron purchase suggestion form in OPAC.

Test plan:

1/ Apply patch.
2/ Play with the new OPACSuggestionMandatoryFields system preference
(select some fields as manadatory, select all, deselect all, try to
submit some suggestions with mandatory fields filled and/or not
filled etc.) to ensure that required fields (and only required fields)
are enforced in the browser to be filled.
3/ With all options deselected, 'Title' field should still be
mandatory (by default).

Signed-off-by: barbara johnson <barbara.johnson@bedfordtx.gov>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 10407: [QA Follow-up] Hashref process_batch params
Marcel de Rooy [Tue, 12 Jul 2016 12:40:35 +0000 (14:40 +0200)]
Bug 10407: [QA Follow-up] Hashref process_batch params

As requested by Mark Tompsett. Hope this guarantees a signoff now..

Note: For consistency four additional parameters were needed to no longer
use file level vars in this subroutine.

Test plan:
Import a file with stage_file.pl.

Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Imported a marc file and a marcxml file with stage_file.pl.

Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 10407: Add two subtests to t/ImportBatch.t
Marcel de Rooy [Fri, 8 Jul 2016 11:17:36 +0000 (13:17 +0200)]
Bug 10407: Add two subtests to t/ImportBatch.t

Creates a few simple tests for the two new subroutines in ImportBatch.pm.

Test plan:
Run t/ImportBatch.t.

Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 10407: Add marcxml import (follow-up)
Marcel de Rooy [Thu, 7 Jul 2016 12:13:16 +0000 (14:13 +0200)]
Bug 10407: Add marcxml import (follow-up)

This patch makes the following changes:

[1] Based on the groundwork of the former patch, add call to
    RecordsFromMARCXMLFile in stage-marc-import. Use format param.
[2] Add format to the template. Use file extension to determine.
    If you use .xml or .marcxml as extension, MARCXML is selected.
[3] In stage-marc-import.tt mark UTF-8 encoding as UTF-8 not as utf8.
[4] BatchStageMarcRecords: do not call plugin if you have no records.
[5] RecordsFromISO2709File: also return errors in an array.
[6] In misc/stage_file.pl also use UTF-8. Handling of errors from [5].

Test plan:
[1] Import an empty file as MARC or MARCXML (with Tools/Stage..import).
[2] Import an non-empty file with invalid contents as MARC or MARCXML.
[3] Export a few records with Tools/Export as MARC and MARCXML.
[4] Import these two files. Check selected format versus file extension.
[5] Import a MARCXML file with misc/stage_file.pl.

Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 10407: Resolve warnings from child process
Marcel de Rooy [Fri, 8 Jul 2016 06:34:00 +0000 (08:34 +0200)]
Bug 10407: Resolve warnings from child process

After the staging job finishes, the child tries to print results to
STDOUT (which is closed). This creates warnings like:

stage-marc-import.pl: binmode() on closed filehandle STDOUT at C4/Templates.pm line 120.
stage-marc-import.pl: Filehandle STDOUT reopened as FH only for input at /usr/lib/perl5/Template/Provider.pm line 964.

Resolving it is simple: the child should exit after marking the job
as finished.

Test plan:
Import a marc file.
Observe that you do no longer have such warnings.

Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 10407: Allow MARCXML records to be imported via GUI (groundwork)
Olli-Antti Kivilahti [Fri, 17 Apr 2015 17:12:49 +0000 (20:12 +0300)]
Bug 10407: Allow MARCXML records to be imported via GUI (groundwork)

Patch from Olli, manual rebase by Marcel (July 7, 2016).

Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Needs follow-up. Test plan in the third patch.

Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 5456 - Create a link to opac-ics.pl
Magnus Enger [Sat, 23 Jul 2016 18:31:11 +0000 (20:31 +0200)]
Bug 5456 - Create a link to opac-ics.pl

opac-ics.pl was added to Koha back in 2007, but there has not been a link to it
from anywhere. This patch adds the link from the main view on
/cgi-bin/koha/opac-user.pl, and makes some changes to opac-ics.pl itself.

Changes to opac-ics.pl:
- Update the code to use date and time for when a loan is due
- Use dt_from_string to turn a MySQL time and date into a DateTime
- Add a timestamp and a UID (these were reported as necessary by a couple of
  iCal validators)
- Remove DTEND from events, since we now have time as well as date for when a
  loan is due
- For loans that are overdue, set the DTSTART to now(), to avoid creating
  calendar events in the past
- Use a template to generate text strings, to make them translatable

To test:
- Apply the patch
- Make sure you have at least a couple of loans, including one overdue
- Go to /cgi-bin/koha/opac-user.pl and click on the link labeled "Download as
  iCal/.ics file"
- Inspect the file in a text editor and/or view the result in a calendar
  appplication. Make sure the data makes sense.
- Sign off and go thee merrily on thine way.

Update 2016-07-25
- Force date_due to UTC to avoid problematic timezone info like this:
  DTSTART:TZID=Europe/Zurich:20160724T235900
- Remove quotes from summary and description

Followed test plan, koha.ics file successfully imported to Thunderbird calendar
Signed-off-by: Marc <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 17149 - EDI accounts: Add missing '>' to breadcrumb
Marc Véron [Thu, 18 Aug 2016 18:42:44 +0000 (20:42 +0200)]
Bug 17149 - EDI accounts: Add missing '>' to breadcrumb

To verify:
Breadcrumb on "EDI accounts" pages reads
Home > Administration EDI accounts > Modify account
instead of:
Home > Administration > EDI accounts > Modify account

To test:
- Apply patch
- Add, edit and delete an EDI account
- Verify that breadcrumb displays properly

Signed-off-by: Aleisha Amohia <aleishaamohia@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 17175: Typo in patron card images error message
Aleisha Amohia [Wed, 24 Aug 2016 00:16:43 +0000 (00:16 +0000)]
Bug 17175: Typo in patron card images error message

To test:
1) Go to Tools -> Patron Card Creator -> New Image
2) Click Upload without attaching anything
3) Notice typo
4) Apply patch and refresh page (resend information if prompted)
5) Notice typo fixed

Sponsored-by: Catalyst IT
Signed-off-by: Claire Gravely <claire_gravely@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 17185: Staff client shows "Lists that include this title:" even if item is not...
Andreas Roussos [Wed, 24 Aug 2016 14:10:29 +0000 (17:10 +0300)]
Bug 17185: Staff client shows "Lists that include this title:" even if item is not in a list

In the staff client, the text "Lists that include this title:"
is always shown, regardless of whether the item is in a list
or not. This patch fixes that.

Test plan:
1) Log in to staff client.
2) Go to biblio details view:
   /cgi-bin/koha/catalogue/detail.pl?biblionumber=X
   Confirm that "Lists that include this title:" is
   shown even if the item is not in a list.
3) Apply the patch.
4) Repeat step 2. Confirm that the patch works, i.e.
   "Lists that include this title:" is only shown
   for biblios that are actually in a list.

Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Only applies to non-XSLT view.

Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 16809: Follow-up for scalarizing biblionumber
Marcel de Rooy [Wed, 17 Aug 2016 13:14:12 +0000 (15:14 +0200)]
Bug 16809: Follow-up for scalarizing biblionumber

Still resolves another multi_param warning.

Test plan:
Look at your logs before and after this patch when saving a biblio
record (you may have to start plack again).
If your biblionumber is mapped to 999c, you should no longer have a warn
about line 2563 (disclaimer: line numbers are subject to change).

Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 16809: Silence authority warnings C4::Biblio::TransformHtmlToMarc
Mark Tompsett [Fri, 24 Jun 2016 15:29:19 +0000 (11:29 -0400)]
Bug 16809: Silence authority warnings C4::Biblio::TransformHtmlToMarc

Most of the floodiness is caused by accessing the cgi parameters
in a context which is hard to determine. By purposefully saving
the value to a scalar variable and using the variable, the issue
disappears, and it will likely be a tiny tad faster as variable
access is faster than multiple function calls.

TEST PLAN
---------
 1) Back up your intranet error log
    -- for example:
       cp ~/koha-dev/var/log/koha-error-log ~/koha-error-log.backup
 2) Blank your intranet error log
    -- for example:
       echo > ~/koha-dev/var/log/koha-error-log
 3) Log into your staff client
 4) Click 'Authorities'
 5) Click 'New from Z39.50'
 5) Type 'Seuss' into 'Name (any):' and press enter
 6) Click 'Import' beside the first link
 7) Click 'Save'
 8) Check your koha-error-log
    -- floody!
 9) Apply patch
10) repeat steps 2-8
    -- blank!
11) restore your intranet error log
   -- for example:
      mv ~/koha-error-log.backup ~/koha-dev/var/log/koha-error-log
12) run koha qa test tools

Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Tested with addbiblio.pl. I would have preferred the scalar option in terms
of simpler code, but this works too.

Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 14612 - Overdue notice triggers should show branchname instead of branchcode
Owen Leonard [Thu, 18 Aug 2016 17:08:33 +0000 (13:08 -0400)]
Bug 14612 - Overdue notice triggers should show branchname instead of branchcode

This patch adds the Branches template plugin to the overdue notice
triggers template so that the library name can be shown instead of the
branchcode.

Also changed: Updated page title to match the name used in tools menus.

To test, apply the patch and go to Tools -> Overdue notice/status
triggers.

- Select a library.
- When the page reloads, the 'Defining overdue actions for...' and
  'Rules for overdue actions: ' headings should show the library name
  instead of the branchcode.

Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 16464: Add FIXME
Jonathan Druart [Tue, 23 Aug 2016 13:17:53 +0000 (14:17 +0100)]
Bug 16464: Add FIXME

Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 16464 - If a patron has been discharged, show a message in the OPAC
Owen Leonard [Tue, 9 Aug 2016 13:49:33 +0000 (09:49 -0400)]
Bug 16464 - If a patron has been discharged, show a message in the OPAC

This patch adds a message to the patron home page in the OPAC to be
shown if the user is restricted because of a discharge.

To test, apply the patch and log into the OPAC as a patron who has been
discharged.
 - You should see a message which says so, including a link to
   the discharge notice.
 - Log in to the OPAC as a patron with a manual restriction and confirm
   that the correct notice is displayed.

Signed-off-by: Claire Gravely <c.gravely@arts.ac.uk>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 17141: Call config method to retrieve logdir
Colin Campbell [Wed, 17 Aug 2016 16:30:55 +0000 (17:30 +0100)]
Bug 17141: Call config method to retrieve logdir

Incorrect method call is causing runtime error and not
retrieving the correct logdir value
Change retrieves the value correctly

To test:
1) Run edi_cron.pl, notice error
2) Apply patch and run edi_cron.pl again, should work as expected

Signed-off-by: Aleisha Amohia <aleishaamohia@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Note: I did not test but changes make sense.

Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 17228 - Make two versions of SIPconfig.xml identical
Magnus Enger [Wed, 31 Aug 2016 08:47:43 +0000 (10:47 +0200)]
Bug 17228 - Make two versions of SIPconfig.xml identical

Several bugs have made changes to etc/SIPconfig.xml but not
updated debian/templates/SIPconfig.xml. This means that an admin
using the Debian packages who enables SIP2 for a site and looks at
/etc/koha/sites/<instance>/SIPconfig.xml will not see an up-to-date
version of that file, with the risk of missing possible config
opportunities.

Since debian/templates/SIPconfig.xml contains no placeholders or
other magic stuff related to the Debian packaging, this patch simply
copies etc/SIPconfig.xml to debian/templates/SIPconfig.xml

To test: diff etc/SIPconfig.xml debian/templates/SIPconfig.xml
There should be no difference between the files

Signed-off-by: Claire Gravely <claire_gravely@hotmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 17228 - Fix whitespace in etc/SIPconfig.xml
Magnus Enger [Wed, 31 Aug 2016 08:45:32 +0000 (10:45 +0200)]
Bug 17228 - Fix whitespace in etc/SIPconfig.xml

Remove trailing whitespace and replace tabs with 4 spaces.

Signed-off-by: Claire Gravely <claire_gravely@hotmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 14434: Display "Not renewable (on hold)" in OPAC
Holger Meißner [Thu, 11 Aug 2016 09:22:00 +0000 (11:22 +0200)]
Bug 14434: Display "Not renewable (on hold)" in OPAC

This patch makes the OPAC display "Not renewable (on hold)" when
a hold is placed.

Test plan:
1) Do not apply patch.
2) Issue an item with automatic renewal.
3) Issue an item with manual renewal.
4) Place a hold on both items.
5) Log in as patron and note that the column "Renew" says "Automatic
   renewal (x of y renewals remaining)" for the auto renewed item
   and "(On hold) for the other item.
6) Apply patch.
7) Refresh OPAC and note that now "Not renewable (on hold)" is displayed
   for both items.
8) Cancel the holds, then log in as patron again and confirm that the
   correct renewal conditions are displayed.

Sponsored-by: Hochschule für Gesundheit (hsg), Germany
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works as advertised

Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 16990: Display branch names instead of code in patron mod requests
Jonathan Druart [Fri, 19 Aug 2016 11:43:24 +0000 (12:43 +0100)]
Bug 16990: Display branch names instead of code in patron mod requests

To test:
- change your homebranch in the OPAC, submit
- change patron modification request in the staff client
- Verify that it shows the old and new branch name instead of the
  code

Signed-off-by: Aleisha Amohia <aleishaamohia@hotmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 17128: Make summary-print.pl plack safe
Jonathan Druart [Mon, 15 Aug 2016 14:45:38 +0000 (15:45 +0100)]
Bug 17128: Make summary-print.pl plack safe

$borrowernumber is used in build_issue_data but not correctly defined
(Variable "$borrowernumber" is not available)

That may cause wrong charge displayed in the summary slip.

Test plan:
- Set rental charge for an item type
- Define a rental discount for that item type in the circ rules
- check in an item matching this rule
Without this patch the charge displayed in the summary slip won't be
calculated with the discount
With this patch applied, the warning in the logs will no longer appear
and the values will be correctly calculated.

Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 16886: Make the 'Upload patron images' tool plack safe
Jonathan Druart [Sat, 9 Jul 2016 12:13:35 +0000 (13:13 +0100)]
Bug 16886: Make the 'Upload patron images' tool plack safe

Some vars are accessed from subroutine, but defined with my.
It causes at least the 2 followings errors:
Variable "$filetype" is not available at
/home/koha/src/tools/picture-upload.pl line 240.
Variable "$uploadfilename" is not available at
/home/koha/src/tools/picture-upload.pl line 241.

To avoid that, they are now declared with our.

Test plan:
Upload image for a patron and confirm that you get a "Result" table and
the errors do not longer appear in the logs.

Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 7045: Update default value placeholders for existing installs
Jonathan Druart [Tue, 16 Aug 2016 08:18:19 +0000 (09:18 +0100)]
Bug 7045: Update default value placeholders for existing installs

Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 7045: Use <<tag>> for default value placeholders
Jonathan Druart [Tue, 16 Aug 2016 08:09:53 +0000 (09:09 +0100)]
Bug 7045: Use <<tag>> for default value placeholders

When adding a biblio, the default value of a MARC subfield defined in
the frameworks can be used as placeholders to set the current date or
the surname of the logged in user (use cases?).
The different placeholders are 'YYYY', 'MM', 'DD', 'user'.
When adding an item, same behavior except that 'user' is not replaced.

This patch makes behaviors consistent between the 2 editors and
surrounds placeholders with << >>
We will now have: <<YYYY>>, <<MM>>, <<DD>> and <<USER>>

Test plan:
Define default values for biblio and item subfields.
Create a bibliographic record and attach it an item.
The default values should be used and replaced if you used placeholders.

Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 17142 - Don't show library group selection in advanced search if groups are not...
Jacek Ablewicz [Wed, 17 Aug 2016 16:42:37 +0000 (18:42 +0200)]
Bug 17142 - Don't show library group selection in advanced search if groups are not defined

Even if library groups/search domains are not defined in the system,
(empty) select for "Groups of libraries" under "Location and
availability" section in OPAC advanced search is still visible; it
shouldn't. Side effect of Bug 15295 - 'searchdomainloop' variable
in the template is now an object, it needs a different kind of statement
(.count) for checking if it's empty or not.

To test:

1) apply patch
2) when there are no groups of libraries defined in Administration ->
Libraries and Groups, "Groups of libraries" selection should be
no longer visible in OPAC adavanced search page
3) add library group or two: "Groups of libraries" selection should
reappear.

Signed-off-by: Aleisha Amohia <aleishaamohia@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 17200 - Badly formatted "hold for" patron name on catalog detail page
Owen Leonard [Thu, 25 Aug 2016 18:06:11 +0000 (14:06 -0400)]
Bug 17200 - Badly formatted "hold for" patron name on catalog detail page

This patch adds a space between first name and surname on the
bibliographic detail page when there is "hold for" information in the
status column of the holdings table.

To test, apply the patch locate a title in the staff client catalog
which has one or more confirmed holds on it. Verify that the patron's
name in the "status" column of the holdings table looks correct, with a
space between first and last name.

Signed-off-by: Claire Gravely <claire_gravely@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 11019 - Require some fields when adding authorized value category
Owen Leonard [Thu, 18 Aug 2016 15:58:42 +0000 (11:58 -0400)]
Bug 11019 - Require some fields when adding authorized value category

This patch modifies the form for adding an authorized value so that
the category is a required fields.
Previously a new authorized value category could be saved with no data.

To test, apply the patch and go to Administration -> Authorized values.

- Click the "New category" button.
- Click the save button without filling in the category.
  You should be prevented from submitting the form.
- Verify that filling in the required field allows the form to be
  submitted.
- Perform the same test when editing an existing authorized value.

Signed-off-by: Aleisha Amohia <aleishaamohia@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Follow-up for QA: Allow a blank authorised value to be created.

Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Amended test plan.

Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 13921 - XSLT Literary Formats Not Showing
Owen Leonard [Fri, 19 Aug 2016 14:08:38 +0000 (10:08 -0400)]
Bug 13921 - XSLT Literary Formats Not Showing

This patch adds some missing literary formats to the staff client and
OPAC's search results XSLT display.

To test you must have DisplayOPACiconsXSLT and DisplayIconsXSLT system
preferences enabled.  XSLTResultsDisplay and OPACXSLTResultsDisplay
should be set to 'default.'

Perform searches in the staff client and the OPAC and confirm that the
following literary forms (defined in 008 position 33) display correctly:
Not fiction; Fiction; Dramas; Essays; Novels; Humor, satires, etc.;
Letters; Short stories; Mixed forms; Poetry; Speeches.

Signed-off-by: Aleisha Amohia <aleishaamohia@hotmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 17157: Same for "More"
Jonathan Druart [Mon, 22 Aug 2016 12:48:59 +0000 (13:48 +0100)]
Bug 17157: Same for "More"

Here I decided to redirect to the mainpage.

Works as dexcribed.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 17157: Fix middle click on "Search" drowndown menu
Jonathan Druart [Mon, 22 Aug 2016 12:36:39 +0000 (13:36 +0100)]
Bug 17157: Fix middle click on "Search" drowndown menu

If you save an item and right click on "Search" or "More" you will get
a software error:
Can't call method "fields" on an undefined value at
/usr/share/koha/intranet/cgi-bin/cataloguing/additem.pl line 742

You will now be redirected to the adv search form.

Wors as described.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 16903 - Multiple class attributes on catalog search tab
Owen Leonard [Tue, 12 Jul 2016 13:24:59 +0000 (09:24 -0400)]
Bug 16903 - Multiple class attributes on catalog search tab

cat-search.inc contains an element with two class attributes, which is
invalid. This patch corrects it.

To test, apply the patch and view any page which uses the cat-search
include file to display the header search boxes. For instance, the
bibliographic detail page.

In the header, the "Search the catalog" box should be selected, and any
text you type in the box should be carried over when you switch to
different search tabs.

Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 17118: (follow-up 15381) Fix regression when clearing a linked authority
Jonathan Druart [Fri, 19 Aug 2016 15:09:55 +0000 (16:09 +0100)]
Bug 17118: (follow-up 15381) Fix regression when clearing a linked authority

Changes made on bug 15381 assumed that the authid was always set.
But if the user wants to clear the field of the authority, the script is
called with authid=0 (FIXME...)

To fix this issue, it's better to move the new calls to
  Koha::Authorities->find($authid)->authtypecode
and
  Koha::Authority::Types->find($authtypecode);
at the correct place

Test plan:
1. Edit a record which has a field linked to an
   authority record (100a for instance).
2. Click the link which triggers the tag editor.
   A pop-up window should be displayed.
3. In the pop-up window, click the "Clear field"
   button.
=> Without this patch A second pop-up window opens and displays an error:
  Can't call method "authtypecode" on an undefined value at /authorities/blinddetail-biblio-search.pl line 61.
=> With this patch applied the field is correctly cleared.

Signed-off-by: Aleisha Amohia <aleishaamohia@hotmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 17201: (bug 16431 follow-up2) Remove occurrence of marcfromkohafield
Jonathan Druart [Fri, 26 Aug 2016 12:33:32 +0000 (12:33 +0000)]
Bug 17201: (bug 16431 follow-up2) Remove occurrence of marcfromkohafield

I really don't know how these tests passed before 16431, the mapping was not complete.

Test plan:
  prove t/db_dependent/Search.t
should return green

Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 17201: (bug 16431 follow-up) Remove occurrence of marcfromkohafield
Jonathan Druart [Fri, 26 Aug 2016 12:32:00 +0000 (13:32 +0100)]
Bug 17201: (bug 16431 follow-up) Remove occurrence of marcfromkohafield

I am not sure this code is called so I don't know how to test it.

Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 17223 Follow-up: updated control file
Mirko Tietgen [Tue, 30 Aug 2016 18:20:17 +0000 (20:20 +0200)]
Bug 17223 Follow-up: updated control file

This is the control file change for the master branch triggered by
the first patch.

Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 17223: Add Cache::Memcached to PerlDependencies
Marcel de Rooy [Tue, 30 Aug 2016 13:52:16 +0000 (15:52 +0200)]
Bug 17223: Add Cache::Memcached to PerlDependencies

Test plan:
Check about page, perl modules.

Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 16449: Remove "no method selected" warning from unimarc_field_4XX
Jonathan Druart [Thu, 5 May 2016 14:25:50 +0000 (15:25 +0100)]
Bug 16449: Remove "no method selected" warning from unimarc_field_4XX

Because of bug 14828, the unimarc_field_4XX now raises a warning:
"No method selected!"

There are no need to select an item type on this page, the default (all)
is always selected.

Test plan:
Link the unimarc_field_4XX value builder with on of the subfield
Edit a record, click on the value builder icon
Note the warning without the patch and that it's gone with the patch
applied

NOTE: Code fix that I derived was identical. Ran
 prove t/db_dependent/FrameworkPlugin.t
to confirm it works.

Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 16686: Add test for Koha::Item::Transfer[s] and Koha::Item->get_transfer
Jonathan Druart [Thu, 7 Jul 2016 17:07:32 +0000 (18:07 +0100)]
Bug 16686: Add test for Koha::Item::Transfer[s] and Koha::Item->get_transfer

Signed-off-by: Marc <veron@veron.ch>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 16686: Add Koha::Object based class for Koha::Item::Transfer[s]
Jonathan Druart [Thu, 7 Jul 2016 17:06:57 +0000 (18:06 +0100)]
Bug 16686: Add Koha::Object based class for Koha::Item::Transfer[s]

Signed-off-by: Marc <veron@veron.ch>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 16686: Rename the transfer method to get_transfer
Jonathan Druart [Thu, 7 Jul 2016 17:04:27 +0000 (18:04 +0100)]
Bug 16686: Rename the transfer method to get_transfer

Signed-off-by: Marc <veron@veron.ch>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 16686: Fix "Item in transit from since" in Holds tab
Jonathan Druart [Sun, 3 Jul 2016 14:32:47 +0000 (15:32 +0100)]
Bug 16686: Fix "Item in transit from since" in Holds tab

POC, tests needed.

Alternative patch works for me.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Marc <veron@veron.ch>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoRevert Bug 17177 - This bug was for 3.20.x only
Kyle M Hall [Fri, 2 Sep 2016 13:54:47 +0000 (13:54 +0000)]
Revert Bug 17177 - This bug was for 3.20.x only

This reverts commit b239aa988a1e5475236257d9af67417372d45923.

8 years agoBug 17177 - about.pl references a module that doesn't exist
Chris Cormack [Wed, 24 Aug 2016 00:53:23 +0000 (12:53 +1200)]
Bug 17177 - about.pl references a module that doesn't exist

To test
1/ Go to the about page, notice error
2/ Apply patch
3/ Notice error gone

Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 11144 [QA Followup] - Let each script run in sequence even if one fails
Kyle M Hall [Fri, 24 Jun 2016 15:18:04 +0000 (15:18 +0000)]
Bug 11144 [QA Followup] - Let each script run in sequence even if one fails

Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Tested the A;B;C variant here. If A fails, B will run. Since we can safely
assume that A (or B) will not fail on a daily basis, this seems to be better
than running them in the wrong order every day.

As the comments on Bugzilla show, several people support this improved
(reordered) scheme and look forward to improved error handling on another
report (obviously not that simple).

Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 11144: Fix sequence of cronjobs: automatic renewal - fines - overdue notices
Katrin Fischer [Tue, 9 Jun 2015 21:13:15 +0000 (23:13 +0200)]
Bug 11144: Fix sequence of cronjobs: automatic renewal - fines - overdue notices

The patch changes the sequence of cronjobs in the crontab example
file and in the cron.daily file of the packages.

This is why:
1) Renew automatically
   ... only when we can't renew, we want to
2) Calculate fines
   ... once the fine are calculated and charged
   we can print the amount into the
3) Overdue notices

Before the change it could happen that you'd charge for an item,
that would then be renewed. Or that you'd try to print fine
amounts into the overdue notices, when they would only be
charged moments later.

To test:
- configure your system so you have items that should
  - be charged with fines
  - renew automatically
- configure your crontabs according to the example file
  or switch the cron.daily in your package installation with
  the new one
- configure your overdue notices so that one should be generated
  <<items.fine>>
- Wait for the cronjobs or schedule them to run earlier
- Verify all is well and as it should be

Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 17048: Fix pagination offset for authority searches
Jonathan Druart [Fri, 19 Aug 2016 13:36:23 +0000 (14:36 +0100)]
Bug 17048: Fix pagination offset for authority searches

At the intranet, the pagination has been broken by bug 12478 (Elastic
Search). There was a confusion between the offset and the page number.

At the OPAC, it is broken since bug 2735 which has mimicked the intranet
script.

Test plan:
Search for a term which will return more than 1 page of results.
Click on the second page
=> Without this patch, the first result of the second page is the second
result of the first page
=> With this patch applied, the offset will be corrected

Signed-off-by: Aleisha Amohia <aleishaamohia@hotmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 17116: Fix CSRF in import_borrowers.pl
Jonathan Druart [Fri, 12 Aug 2016 10:36:06 +0000 (11:36 +0100)]
Bug 17116: Fix CSRF in import_borrowers.pl

If an attacker can get an authenticated Koha user to visit their page
with the url below, they can change patrons' information

The exploit can be simulated triggering
  /tools/import_borrowers.pl?uploadborrowers=42

In that case it won't do anything wrong, but it you POST a valid file,
it could.

Test plan:
Trigger the url above
=> Without this patch, you will the result page
=> With this patch, you will get the "Wrong CSRF token" error.

Regression test:
Import a valid file from the import patron form, everything should go
fine.

Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 14868 - Update swagger.min.json
Kyle M Hall [Fri, 2 Sep 2016 12:25:59 +0000 (12:25 +0000)]
Bug 14868 - Update swagger.min.json

Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 14868: (QA followup) POD fixes
Tomas Cohen Arazi [Wed, 31 Aug 2016 23:21:12 +0000 (20:21 -0300)]
Bug 14868: (QA followup) POD fixes

To make the QA scripts happy, the POD needed a fix, and also
keys applied to a hashref needs to be avoided.

Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Benjamin Rokseth <benjamin.rokseth@kul.oslo.kommune.no>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 14868: (QA followup) Change permission check order
Tomas Cohen Arazi [Wed, 31 Aug 2016 23:11:05 +0000 (20:11 -0300)]
Bug 14868: (QA followup) Change permission check order

This patch changes the permission check order because haspermission
is the smaller check, and going through the patron/user and its guaranteed
before checking if it is (say) a staff member or even a superlibrarian doesn't
seem right.

Bonus: Remove unneeded C4::Auth import in Patron.pm

Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Benjamin Rokseth <benjamin.rokseth@kul.oslo.kommune.no>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 14868: Display required permissions in permission error response
Lari Taskula [Tue, 23 Aug 2016 12:38:44 +0000 (15:38 +0300)]
Bug 14868: Display required permissions in permission error response

When user does not have required permissions to use API operation, it would be
useful to let them know which permissions he is missing. Since they are now
defined in Swagger, we can easily render them into the response.

To test:
1. Use a patron without any permissions
2. Make GET request to http://yourlib/api/v1/patrons
3. Observe permission error and see that required_permissions are displayed.
4. Run t/db_dependent/api/v1/patrons.t

Signed-off-by: Benjamin Rokseth <benjamin.rokseth@kul.oslo.kommune.no>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 14868: Use x-koha-authorization in current routes
Lari Taskula [Thu, 11 Aug 2016 11:45:16 +0000 (14:45 +0300)]
Bug 14868: Use x-koha-authorization in current routes

To test:
1. Run t/db_dependent/api/v1/holds.t
2. Run t/db_dependent/api/v1/patrons.t

Signed-off-by: Benjamin Rokseth <benjamin.rokseth@kul.oslo.kommune.no>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 14868: Give users possibility to request their own object
Lari Taskula [Fri, 17 Jun 2016 08:43:52 +0000 (11:43 +0300)]
Bug 14868: Give users possibility to request their own object

Allow access to user's own objects even if they do not have required permissions.
This will be very useful in many cases where an user wants to request their own
object, for example renewing their checkouts or placing a hold for themselves.

First, this patch renames "x-koha-permission" to "x-koha-authorization" in order
to describe the new functionality better.

Second, we can now add two extra parameters under "x-koha-authorization":
- "allow-owner"; Allows the owner of object to access it (without permission)
- "allow-guarantor"; Allows guarantor of the owner of object to access it
                     (without permission)

Third, since permission checking is outside of actual controller, we need a way
to find out ownership from different types of parameters, e.g. checkout_id from
/checkouts/{checkout_id}, borrowernumber from /patrons/{borrowernumber} etc.
A solution is to match the parameter with a subroutine that is designed to verify
the ownership for that object. See the new subroutines in Koha::REST::V1.

To use this functionality you will simply define it in Swagger:
"/patrons/{borrowernumber}": {
  "get": {
    ...,
    "x-koha-authorization": {
      "allow-owner": true,
      "permissions": {
        "borrowers": "1"
      }
    }
  }
}

If a parameter that is not yet defined in Koha::REST::V1::check_object_ownership,
you also need to define it and implement a subroutine that determines ownership.

Tests are provided in a following patch that adds this functionality for current
API operations.

Signed-off-by: Benjamin Rokseth <benjamin.rokseth@kul.oslo.kommune.no>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 14868: Swagger2-driven Permission checking
Olli-Antti Kivilahti [Mon, 14 Sep 2015 12:20:20 +0000 (15:20 +0300)]
Bug 14868: Swagger2-driven Permission checking

Define 'x-koha-permission' for the Swagger2 Operation Object, to automatically
authorize against the required permissions.

This way we immediately tell the API consumer in the Swagger2-definition, which
permissions are needed to access defined resources.
Also we don't need to maintain permissions in multiple locations and we can build
a smart testing framework to help a lot in creating tests for the new REST API.

Signed-off-by: Benjamin Rokseth <benjamin.rokseth@kul.oslo.kommune.no>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 16942 [QA Followup] - Add unit test
Kyle M Hall [Tue, 26 Jul 2016 15:00:58 +0000 (15:00 +0000)]
Bug 16942 [QA Followup] - Add unit test

Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jesse Maseto <jesse@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 16942 - Confirm hold results in ugly error
Kyle M Hall [Tue, 19 Jul 2016 16:57:25 +0000 (16:57 +0000)]
Bug 16942 - Confirm hold results in ugly error

Confirming a hold to set it to waiting will result in an DBIC error in
master.

Test Plan:
1) Attempt to check in an item on hold and confirm the hold
2) Note the error
3) Apply this patch
4) Repeat step 1
5) Note there is no error!

Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
https://bugs.koha-community.org/show_bug.cgi?id=14942

Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jesse Maseto <jesse@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 16699: (QA followup) Move minified swagger file into the swagger/ dir
Tomas Cohen Arazi [Thu, 25 Aug 2016 17:52:47 +0000 (14:52 -0300)]
Bug 16699: (QA followup) Move minified swagger file into the swagger/ dir

Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Benjamin Rokseth <benjamin.rokseth@kul.oslo.kommune.no>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>