Kyle M Hall [Fri, 3 May 2024 14:07:44 +0000 (14:07 +0000)]
Bug 35169: (QA follow-up) Fix up syspref language and group them together
The language used in the syspref preferences was a bit confusing.
Also, it makes sense to keep these two together on the page as they
are intrinsically linked.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Lucas Gass [Sat, 9 Mar 2024 17:53:13 +0000 (17:53 +0000)]
Bug 35169: (follow-up) perltidy
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Lucas Gass [Mon, 29 Apr 2024 20:39:08 +0000 (20:39 +0000)]
Bug 36709: Add confirm flag to update_localuse_from_statistics.pl script
To test:
1. APPLY PATCH and restart all
2. Run the update_localuse_from_statistics.pl script without a confirm flag, nothing happens.
3. Run the script and add the --confirm flag, stuff happens.
Signed-off-by: Matt Blenkinsop <matt.blenkinsop@ptfs-europe.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Janusz Kaczmarek [Tue, 30 Apr 2024 10:18:12 +0000 (10:18 +0000)]
Bug 36730: (Bug 35428 follow-up) po files (sometimes) fail to update
Under some circumstances (e.g. non-standard disk latency) po files fail
to be generated. The output from the gulp po:update --lang xx-XX task
is than like this:
[10:01:39] 'po_update_staff' errored after 6.41 s
[10:01:39] Error: ENOENT: no such file or directory, open '/tmp/koha-5WCc9s/Koha-staff-prog.pot'
This is due to the time dependencies inside the function flush (callback)
(in the function xgettext) in gulpfile.js. It happens that the
/tmp/koha-NNNNNN folder gets deleted before the asynchronous callback
function called by fs.readFile is completed. The callback should copy
the content of the .pot file from /tmp/koha- to its final destination,
while, in parallel in fact, the folder inside /tmp is being removed.
This creates a race condition.
Test plan:
==========
Hard to reproduce. But the race condition found in the code should
be obvious.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Emily Lamancusa [Tue, 19 Mar 2024 18:14:27 +0000 (14:14 -0400)]
Bug 34972: Remove GetOtherReserves
GetOtherReserves attempts to set the waiting/transit status for the next
hold on the list when applicable, but in practice it either leaves the
hold state unchanged, or sets the itemnumber without setting the found
status (erroneously converting bib-level holds to item-level holds).
The latter situation only occurs when the user has been prompted to
confirm, cancel, or revert the hold, and is able to ignore the prompt.
In those situations, the hold's state should not change.
GetOtherReserves does not need to change the hold state, and it does not
do so correctly. Besides that, it does not do much other than call
CheckReserves, and is only used in 3 places.
This patch removes GetOtherReserves, and refactors returns.pl and
C4::Reserves::ModReserveCancelAll to call CheckReserves directly instead.
To test:
1. Place 2 bib-level holds for 2 different patrons (Patron A and Patron
B) on the same record, both for pickup at the logged-in library
2. Check in an item from that record to fill Patron A's hold
3. Set the hold's expiration date to yesterday by accessing the database
in the command line:
- In a ktd shell prompt, open the db client with koha-mysql kohadev
- UPDATE reserves
SET expirationdate = DATE_SUB(CURDATE(), INTERVAL 1 DAY)
WHERE borrowernumber = <Patron A's borrowernumber>
4. Go to Circulation > Holds Awaiting Pickup, and find the hold in the
"holds waiting past their expiration date" tab
5. Click the "Cancel hold" button in the Actions column next to the hold
(do not check in the book)
6. Return to the bib record and look at Patron B's hold
--> Note that Patron B's hold is now an item-level hold and does not
have a waiting status
7. Cancel Patron B's hold
8. Place 2 new holds on the record: one for Patron A at the logged-in
library, and one for Patron B at a different library
9. Check in an item to fill Patron A's hold
10. Repeat steps 3-5 to expire and cancel Patron A's hold
11. Return to the Holds tab of the bib record and look at Patron B's hold
--> Note that Patron B's hold is now an item-level hold, and there is no
"Revert transit status" button
12. Place 2 bib-level holds for 2 different patrons (Patron A and Patron
B) on the same record, both for pickup at the logged-in library
13. Check in an item from that record to fill Patron A's hold
14. Check in the same item again. A modal will pop up, saying that the
hold is already waiting
15. In the modal, choose a cancellation reason and click "Cancel hold"
--> A new modal will pop up to fill Patron B's hold
16. Click "Ignore" on the modal for Patron B's hold
17. Return to the bib record and look at Patron B's hold
--> Note that Patron B's hold is now an item-level hold and does not
have a waiting status
18. Apply patch
19. Repeat steps 1-6
--> Note that Patron B's hold is still a bib-level/"next available" hold
20. Repeat steps 7-11
--> Note that Patron B's hold is still a bib-level/"next available" hold
21. Repeat steps 12-17
--> Note that Patron B's hold is still a bib-level/"next available" hold
Make sure correct behavior is unchanged:
22. Cancel Patron B's hold
23. Place 2 new holds on the record: one for Patron A at the logged-in
library, and one for Patron B at a different library
24. Check in an item from that record to fill Patron A's hold
25. Check in the same item again. A modal will pop up, saying that the
hold is already waiting
26. In the modal, choose a cancellation reason and click "Cancel hold"
--> A new modal will pop up to fill Patron B's hold
27. Click "Print slip, transfer, and confirm" on the modal for Patron B's hold
--> Confirm that the information on the slip is correct
--> Confirm that the hold is correctly put in transit
22. Set HoldsAutoFill and HoldsAutoFillPrintSlip to "Do"
23. Place a bib-level hold for the logged-in library
24. Check in an item from that bib
--> Confirm the information on the slip is correct
--> Confirm the hold is correctly assigned and set to waiting
25. Place a bib-level hold for a different library
26. Check in an item from that bib
--> Confirm the information on the slip is correct
--> Confirm the hold is correctly put in transit
27. Change the logged-in branch to match the hold pickup location
28. Check the item in
--> Confirm the information on the slip is correct
--> Confirm the hold is correctly assigned and set to waiting
29. Repeat steps 22-26
--> Confirm a correct hold slip pops up for Patron B's hold
--> Confirm that Patron B's hold is correctly put in transit
30. Cancel Patron B's hold
31. Place 2 bib-level holds for 2 different patrons (Patron A and Patron
B) on the same record, both for pickup at the logged-in library
33. Repeat steps 24-26
--> Confirm a correct hold slip pops up for Patron B's hold
--> Confirm Patron B's hold is correctly set to Waiting
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
To test:
1. Apply this patch only
2. prove t/db_dependent/Koha/Holds.t
--> Tests pass
3. Apply the other patch
4. prove t/db_dependent/Koha/Holds.test
--> Tests still pass
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
A Marcel's QA patch to Bug 36552 added use POSIX; in two spots.
In https://metacpan.org/pod/POSIX we read:
CAVEATS
Everything is exported by default (with a handful of exceptions). This is
an unfortunate backwards compatibility feature and its use is strongly
discouraged. You should either prevent the exporting (by saying use
POSIX ();, as usual) and then use fully qualified names (e.g.
POSIX::SEEK_END), or give an explicit import list. If you
do neither and opt for the default (as in use POSIX;), you will
import hundreds and hundreds of symbols into your namespace.
This patch fixes this.
No test plan.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Jonathan Druart [Mon, 6 May 2024 10:58:33 +0000 (12:58 +0200)]
Bug 36790: List table columns for 230600052 queries
We must list the columns, or the db rev will fail when a new column is
added. It happened here when 33478 added 'style'
Also remove id and dates
To test:
1. On current main, run:
$ ktd --shell
k$ perl /kohadevbox/misc4dev/run_tests.pl --koha-dir=. --run-db-upgrade-only
=> FAIL: Tests explode for DB query issues
2. Apply this patch
3. Repeat 1
=> SUCCESS: Tests pass!
4. Sign off :-D
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Janusz Kaczmarek [Tue, 14 Mar 2023 13:22:27 +0000 (14:22 +0100)]
Bug 36554: Document languages from field 041 should be present in 'ln' search field and Languages facet (MARC 21)
In Elasticsearch, the field 041 (subfields: a, d, e, i, j)
is not indexed with 'ln' search field. As a result, records cannot
be found when searching with languages present in 041 (but only
with the one from 008/35-37), and the languages are also missing
from the facet.
Subfields content (only relevant subfields):
$a - Language code of text/sound track or separate title
$d - Language code of sung or spoken text
$e - Language code of librettos
$i - Language code of intertitles
$j - Language code of subtitles
Test plan
=========
0. Have a test installation with Elasticsearch.
1. In ktd with its test data, make a biblio search for a language present
in 041 a/d/e/i/j but not in 008/35-37, e.g. for Japanese (with ln:jpn
or from Advance search). You will get no results.
2. Apply the patch, reindex with:
sudo koha-elasticsearch --rebuild -r -b kohadev
3. Repeat the test. You should get some records and also you should see
the Japanese language in the Languages facet.
Signed-off-by: Roman Dolny <roman.dolny@jezuici.pl> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Owen Leonard [Thu, 29 Feb 2024 16:36:34 +0000 (16:36 +0000)]
Bug 36390: Two minor OPAC CSS fixes
This patch makes corrections to OPAC CSS to address two small issues.
To test, apply the patch and rebuild the OPAC CSS.
- Perform a catalog search which will return multiple results..
- In the table of search results, check the icon and text for the
controls under each title: "Place hold", "Add tag", "Add to cart" etc.
- The colors should be consistent, with a slightly darker blue for the
icons.
- Scroll down until the table header "sticks" to the top of the
viewport.
- There should be no gap between the header row with the pagination
links and the row with the "Select all", "Clear all", etc. controls.
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Lucas Gass [Mon, 12 Feb 2024 22:03:38 +0000 (22:03 +0000)]
Bug 36074: Add classes to materials specfied message on check in and checkout when CircConfirmItemParts is on.
To test:
1. APPLY PATCH
2. Set CircConfirmItemParts to 'Require'.
3. Add a materials specified message to an item. ( 952$3 )
4. Add the following CSS to your IntranetUserCSS:
5. Checkout that item. Notice the message should be green and the label (Note about the accompanying materials:) should be purple.
6. Check in that item. Notice the message should be green and the label (Note about the accompanying materials:) should be purple.
Signed-off-by: Brendan Lawlor <blawlor@clamsnet.org> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Lucas Gass [Thu, 21 Mar 2024 16:37:13 +0000 (16:37 +0000)]
Bug 31981: Add classes to each NEEDSCONFIRM message in circ/circulation.tt
This patch adds a 'needsconfirm' class and a unique class to each NEEDSCONFIRM message on circ/circulation.tt to make these easier to style individually.
To test:
1. APPLY patch
2. Review the diff to see each of the NEEDSCONFIRMATION messages.
3. Add some CSS to IntranetUserCSS like this:
4. Place a hold on an item for Patron A, do not trigger the hold, and check the item out to Patron B. The message background is blue.
5. Then check the item in, confirm the hold, then check the item out to Patron B. The message background is orange
6. Check something out that is already checked out to that patron, message background is lime green.
7. Have too much debt and check something out to a patron, message is red.
Note: There are plenty more NEEDSCONFIRMATION messages but I don't think we need to test every single one.
Note: These background colors are more testing purposes only. Signed-off-by: Donna <donna@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Janusz Kaczmarek [Thu, 11 Apr 2024 18:02:14 +0000 (18:02 +0000)]
Bug 36584: Add fields 520, 561, and 563 (MARC 21) to ES note search field
With Zebra, the general keyword search covered the entire record content,
even if the field was not explicitly indexed with a Zebra index (the Any index).
With Elasticsearch only the content of the fields explicitly indexed
can be found with general keyword search. This is OK, to some extent, but with
the current configuration it hides the content fo some important notes from the
searches, and librarians complained about that: 520 - Summary, etc.,
561 - Ownership and Custodial History, 563 - Binding Information.
This patch adds the content of 520, 561, and 563 fields to the 'note'
search field.
Test plan
=========
1. Have an installation with Elasticsearch.
2. Add some information to the 520, 561, and/or 563 fields (561 is
hidden in the default framework--one should enable it to be able to use
the 561 field). Save teh record.
3. Try to find the record with the general keyword search, with the words
you used. If they were specific enough, you will get no results.
4. Apply the patch, reindex with:
sudo koha-elasticsearch --rebuild -r -b kohadev
5. Confirm that now you are able to find the record with the information
you entered.
Signed-off-by: Pedro Amorim <pedro.amorim@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Janusz Kaczmarek [Thu, 11 Apr 2024 14:32:51 +0000 (14:32 +0000)]
Bug 36578: Elasticsearch: publisher-location (pl) index should include field 752 (for old prints) and also support UNIMARC
Extension to bug 36269: 1) when cataloguing old prints, the standardized form of
the place of publication is given in the field 752 and as such should also be indexed.
2) Also, normal UNIMARC fields for publication place should be indexed (210a, 214a).
Test plan
=========
Scenario A (MARC 21, field 752)
-------------------------------
0. Have an installation with Elasticsearch and MARC 21 configuration.
1. Activate subfields 752 $a, $d in the default framework (Visibility: Editor).
2. Edit an existing record with this framework, putting some rare words in the
752 $a and $d subfields.
3. Try to make a search with tis words (general keyword or by publication place,
i.e. pl:).
4. You hsold get no results.
5. Apply the patch, reindex with:
sudo koha-elasticsearch --rebuild -r -b kohadev
6. Repeat p. 3. You should get your edited record.
Scenario B (UNIMARC)
--------------------
0. Have an installation with Elasticsearch and UNIMARC configuration.
1. Try to search for a publication place, either with pl: directly in the
search window, or in Advanced search, with Publisher location.
With ktd UNIMARC test date you can search for 'Ste Geneviève Cedex'.
2. You should get no results.
3. Apply the patch, reindex with:
sudo koha-elasticsearch --rebuild -r -b kohadev
4. Repeat p. 1. You should get some results (with ktd test data set and
Ste Geneviève Cedex - record #1).
Signed-off-by: Roman Dolny <roman.dolny@jezuici.pl> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Bug 34693: Add 035$a as Other-control-number index in default authorities search indexes
This patch adds a new index for authorities, Other-control-number, and maps it to 035$a.
This will help when trying to match authority records when importing external records.
Test 1:
0. Make sure Elasticsearch is set as the search engine
1. Apply patch and restart
2. Import the attached record
2.1. Go to Cataloging > Stage records for import
2.2. Choose the file
2.3. Click Upload file
2.4. Choose Record type: Authority
2.5. Click Stage for import
(wait until the job is finished...)
2.6. Click View batch
2.7. Click Import this batch into the catalog
(wait until the job is finished...)
2.8. Click Manage imported batch
2.9. Click View next to the record
2.10. Note the auth id number
3. Examine the ES entry for the record (replace INDEX_NAME with the index name (found in koha-conf.xml and XX with the auth_id)
Test 2 (optional):
1. Steps 1 and 2 as above
2. Add a matching rule to match on 035$a for authority records
2.1. Go to Administration > Record matching rules
2.2. Click New record matching rule
2.3. Fill out the form
- Matching rule code: enter a code (for example AUTCONTROL)
- Description: enter a description (for example 035$a for authorities)
- Match threshold: 100
- Record type: Authority record
- Search index: Other-control-number
- Score: 100
- Tag: 035
- Subfields: a
2.4. Click Save
3. Import the same record again, checking for matches using the new rule
3.1. Go to Cataloging > Stage records for import
3.2. Choose the file
3.3. Click Upload file
3.4. Choose Record type: Authority
3.5. Choose Record matching rule: rule created above
2.6. Click Stage for import
(wait until the job is finished...)
--> It should say that 1 record was found using the rule
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Bug 36247: MARC21 Addition to relator terms in technical notice 2024-02-27
This patch adds the relator code gdv (Game developer) in the list of
MARC21 relator terms in Koha.
To test:
1. Apply patch and reset_all
2. Go to Administration > Authorized values > RELTERMS
3. Search for gdv
--> The new relator code should be there with its corresponding term
"Game developer"
Note: this is added in the installer files. It will not affect existing
installations. For existing installations, add the new relator code in
Administration > Authorized values > RELTERMS.
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This patch updates the default MARC21 framework to reflect the changes
brought by Update 37 (December 2023).
To test:
1. Apply patch and reset_all
2. Go to Administration > MARC bibliographic framework
3. Click Actions next to the default framework and choose MARC structure
4. Check for the changes detailed in the update
https://www.loc.gov/marc/bibliographic/bdapndxg.html
- Two subfields of 022 should be marked as obsolete
- l ISSN-L [OBSOLETE]
- m Canceled ISSN-L [OBSOLETE]
- There should be a new field 023, named CLUSTER ISSN
- This field should be repeatable
- Subfields:
- 0 Authority record control number or standard number (NR)
- 1 Real World Object URI (R)
- 2 Source (NR)
- 6 Linkage (NR)
- 8 Field link and sequence number (R)
- a Cluster ISSN (NR)
- y Incorrect Cluster ISSN (R)
- z Canceled Cluster ISSN (R)
- There should be one new subfield in field 532
- 3 Materials specified (NR)
5. Optional: run the framework test in Administration > MARC
bibliographic framework test
--> All should be OK
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Owen Leonard [Tue, 19 Mar 2024 15:06:08 +0000 (15:06 +0000)]
Bug 35895: (follow-up) Add markup comments
This patch adds comments to the template to highlight the markup
structure.
This patch should have no effect on the page's appearance or
functionality.
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Owen Leonard [Tue, 19 Mar 2024 15:05:25 +0000 (15:05 +0000)]
Bug 35895: Reindent tags review template
This patch reindents the tags review template so that it has consistent
indentation, with tab indentation coverted to space.
The patch also adds "FILTER collapse" around the <style> block in the
head of the page.
To test, apply the patch and go to Tools -> Tags.
- The page should look unchanged.
- Test that no functionality has been affected:
- Tag searches
- Tag status changes
- Check lists
- If you view the diff while ignoring whitespace the only changes should
be places where line breaks were introduced
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Martin Renvoize [Wed, 1 May 2024 08:57:49 +0000 (09:57 +0100)]
Bug 27753: (QA follow-up) Check that item exists before using it
We're actioning the change of claim status outside of any block that
checks the $item exists. As such we'll want to add that check in here.
I did consider that this should live inside AddIssue, but on reflection
the librarian may want to not proceed with the issue given other return
values from the CanBookBeIssued call, but you still want the
AutoClaimReturn to fire regardless as you've now found the item.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Laura Escamilla [Tue, 30 Apr 2024 14:21:35 +0000 (14:21 +0000)]
Bug 27753: (follow-up) Update logic in AddReturn
The new logic in AddReturn was flawed, we were missing return messages
due to moving the if statement too high and catching more code than
intended.
Mentored-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Laura Escamilla [Tue, 19 Mar 2024 16:03:54 +0000 (16:03 +0000)]
Bug 27753: Unit tests
Add unit tests for new logic introduced to C4::Circulation::AddReturn
Signed-off-by: Andrew Fuerste Henry <andrewfh@dubcolib.org> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Laura Escamilla [Tue, 12 Mar 2024 02:44:05 +0000 (02:44 +0000)]
Bug 27753: Added new system preferences for automatically resolving claims
To test:
1. Configure Claims returned
1. Go to Administration > Authorized Values > LOST
2. Add a new authorized value with value:6 and description:Claims returned
3. Go to Administration > System Preferences
4. Set ClaimReturnedLostValue to 6 and save
2. Check out an item to a patron.
1. Mark the item as claim returned
2. Check the item in.
3. A message stating that the item has been claimed as returned pops up with
an option to resolve.
4. Resolve the claim.
3. Check out the item to the patron again.
1. Mark the item as claim returned.
2. Check out the item to a new patron. Select “Yes, check out”
3. Go back to the previous patron. Notice that their claim was not resolved.
4. Apply the patch.
1. Updatedatabase
2. restart_all
3. Go to the system preferences and set the system preference
‘AutoClaimReturnStatusOnCheckin’ to ‘Returned by patron’
4. Set ‘AutoClaimReturnStatusOnCheckout’ to ‘Found in library’
5. Redo step 2
1. When checking the claim returned item in you will now see a message that
says “The previously claimed returned item has been found, automatically
resolving the associated claim.”
2. View the previous patron. Their claim has automatically been resolved
with a status of ‘Returned by patron’
6. Redo step 3
1. Upon checking the item out to another patron you will see a message that
says “The previously claimed returned item has been found, automatically
resolving the associated claim.”
2. View the previous patron. Their claim has automatically been resolved
with a status of ‘Found in library’.
7. Sign off and have a wonderful day!
Sponsored-by: Altadena Library District Signed-off-by: Andrew Fuerste Henry <andrewfh@dubcolib.org> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Hammat Wele [Thu, 21 Mar 2024 22:53:26 +0000 (22:53 +0000)]
Bug 36393: Renewal with a specific date does not take the new date due that we pick
When we renew a notice with a specific date and we have to override the limit, the new date due is not the date that we picked
To reproduce
1- Log in to the staff interface
1-1. Make sure you have a ciculation rule that allows you to renew
1-2. set the AllowRenewalLimitOverride system preference to Allow and SpecifyDueDate to Allow
2. Check out the item to a Borrower
5. Access the borrower's account and renew it until the limit is reached and note the due date.
6. Go to Circulation, click Renew
7. Enter the item barcode and choose a due date further than the due date from step 5 and submit
8. Click on Override limit and renew button
---> Note that the new date due is not the date that we picked in step 7
9. Apply the patch
10. Repeat step 6, 7 snd 8
---> Note that the new date due is the date that we picked
Signed-off-by: Anneli Österman <anneli.osterman@koha-suomi.fi> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Magnus Enger [Mon, 5 Feb 2024 08:12:29 +0000 (08:12 +0000)]
Bug 35954: Add --status to koha-plack
This adds a --status switch to the koha-plack command.
To test on ktd:
- Copy the script to /usr/sbin, so you run the modified script,
and not the one installed by Koha:
$ sudo cp debian/scripts/koha-plack /usr/sbin/
- Stop and start Plack for kohadev like so:
$ sudo koha-plack --stop kohadev
$ sudo koha-plack --start kohadev
And make sure this reports the correct status, both when Plack
is running and when it is not running:
$ sudo koha-plack --status kohadev
- Make sure --status is mentioned here:
$ sudo koha-plack --help
- See https://wiki.koha-community.org/wiki/Testing_man_pages for
details on how to check the manual page for the command
Signed-off-by: Tadeusz Sośnierz <tadeusz@sosnierz.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Jacob O'Mara [Mon, 8 Apr 2024 08:50:37 +0000 (09:50 +0100)]
Bug 22740: Write unit tests for automatic lost status switching
This patch adds the unit tests for the new system preferences that will
automatically change an items lost status to an authorised value defined
in these preferences on payment or write off of outstanding balance.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Laura Escamilla <laura.escamilla@bywatersolutions.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Jacob O'Mara [Wed, 27 Mar 2024 14:58:13 +0000 (14:58 +0000)]
Bug 22740: Automatically change lost status when item is paid for
This patch implements two new system preferences, "UpdateItemLostStatusWhenWriteOff" and "UpdateItemLostStatusWhenPaid" that allow you to specify the status to change an item to when the outstanding balance of a lost item is paid or written off. These preferences are tied to the LOST authorised values set.
Test Plan:
- Set one of the system preference to any of the available values
- Set an item as lost
- Make a manual invoice for your desired user and assign it to the barcode of the above item
- Save and Pay
- Select Pay/Write Off depending on the system preference you selected above
- Pay
- Note that the status of the item has changed to the status you set with the system preference
- Repeat for all values of both system preferences
- Check that when the system preference is left blank and no option is chosen, the lost status does not update.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Laura Escamilla <laura.escamilla@bywatersolutions.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This patch adds the new log actions, related to restrictions, to the log
viewer.
To test:
0. Set BorrowersLog to 'Log'
1. Pick a patron
2. Add a restriction and identify it's id, maybe using the DB:
$ ktd --shell
k$ koha-mysql kohadev
> SELECT * FROM borrower_debarments;
3. Run [1]:
k$ perl -MKoha::Patron::Debarments \
-e 'Koha::Patron::Debarments::ModDebarment( { borrower_debarment_id => 195, comment => "potato" } );'
4. Visit the log viewer.
=> SUCCESS: You can filter on 'Create restriction', 'Modify restriction'
and 'Delete restriction', things are displayed correctly.
[1] There's the ModDebarment method in the codebase, but I couldn't find
a way to trigger it for testing, so my last resort was to do it from the
CLI, manually. The tests on the previous patches cover the method
anyway.
Sponsored-by: Karlsruhe Institute of Technology (KIT) Signed-off-by: Michaela Sieber <michaela.sieber@kit.edu> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
To test:
1. Apply the unit tests
2. Run:
$ ktd --shell
k$ prove t/db_dependent/Patron/Borrower_Debarments.t
=> FAIL: The feature is not implemented! Nothing is logged!
3. Apply this patch
4. Repeat 2
=> SUCCESS: Tests pass!
5. Sign off :-D
Sponsored-by: Karlsruhe Institute of Technology (KIT) Signed-off-by: Michaela Sieber <michaela.sieber@kit.edu> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Sponsored-by: Karlsruhe Institute of Technology (KIT) Signed-off-by: Michaela Sieber <michaela.sieber@kit.edu> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Bug 25996: Make AddDebarment() use Koha::Patron::Restriction
This patch makes the AddDebarment() method use the Koha::Object-based
class to ease the next steps. The current codebase makes the feature
fragile otherwise, as adding a new row and then querying for the latest
row of that kind seems risky,
With this approach the result is the same, but we have the
Koha::Patron::Restriction object for using it later in logging.
I opted to return 1 as it does now. The whole module deserves to be
removed in the future but it is out of the scope of this report.
To test:
1. Run:
$ ktd --shell
k$ prove t/db_dependent/Patron/Borrower_Debarments.t
=> SUCCESS: Tests pass
2. Apply this tiny refactoring patch
3. Repeat 1
=> SUCCESS: Tests still pass!
4. Sign off :-D
Sponsored-by: Karlsruhe Institute of Technology (KIT) Signed-off-by: Michaela Sieber <michaela.sieber@kit.edu> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Lucas Gass [Wed, 10 Apr 2024 11:56:01 +0000 (11:56 +0000)]
Bug 36137: Make update_totalissues cron always skip the holds queue
To test:
1. Run the update_totalissues cron, the holds queue is updated.
2. APPLY PATCH, restart services
3. Run update_totalissues cron again, this time the holds queue should always be skipped.
Signed-off-by: Matt Blenkinsop <matt.blenkinsop@ptfs-europe.com> Signed-off-by: Emily Lamancusa <emily.lamancusa@montgomerycountymd.gov> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Nick Clemens [Fri, 12 Apr 2024 11:50:34 +0000 (11:50 +0000)]
Bug 36246: (follow-up) Fix confirm
Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Jonathan Druart [Wed, 20 Mar 2024 09:53:11 +0000 (10:53 +0100)]
Bug 36246: Add the confirmation text directly to the attribute
To avoid the eval and have all the values together.
For discussion.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Nick Clemens [Wed, 28 Feb 2024 14:46:43 +0000 (09:46 -0500)]
Bug 36246: Add JS function/include for submitting forms from link data
This patch adds a new js include file form-submit.js which will read data elements from a link
and use those to submit a form
This patch fixes forms on acqui/invoice.pl as an example
To test:
1 - Add some invoices for a vendor
2 - Got to Acquisitions->Invoices
3 - Actions -> Close - confirm it works
4 - Got to 'Closed invoices' - reopen
5 - Go to Details on the invoice
6 - Add an adjustment
7 - Delete the adjustment
8 - Confirm it works
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Janusz Kaczmarek [Thu, 11 Apr 2024 09:21:42 +0000 (09:21 +0000)]
Bug 36574: Canceled/invalid ISBN not indexed by ES for MARC 21
For MARC 21, canceled/invalid ISBNs (subfield 020 $z) are not being
indexed in Elasticsearch (search fields identifier-standard and isbn),
but it is for UNIMARC (subfield 010 $z). As a result, a user searching
for such an ISBN (e.g. with wrong checksum--and therefor put in 020 $z)
will not find the record in the catalogue.
A new isbn-all Elasticsearch search field 'isbn-all' has been created with
020az (MARC 21, and 010az for UNIMARC), 010z has been removed from isbn
search field for UNIMARC, and 020z has been added to identifier-standard
search field.
Test plan
=========
0. Have a test installation with Elasticsearch.
1. In ktd with its test data, make a biblio search for a cancelled ISBN
e.g. 9780007269854. You will get no results.
2. Apply the patch, reindex with:
sudo koha-elasticsearch --rebuild -r -b kohadev
3. Repeat the test. You should get "The ice princess / Camilla Läckberg".
Signed-off-by: Roman Dolny <roman.dolny@jezuici.pl> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Martin Renvoize [Wed, 7 Feb 2024 13:34:20 +0000 (13:34 +0000)]
Bug 36003: Add cookie consent buttons to hidden list on print
This patch adds #consentMoreInfo, #cookieConsentFooter and
.consentAcceptEssential to the hidden fields for OPAC printing.
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Martin Renvoize [Thu, 21 Mar 2024 15:34:59 +0000 (15:34 +0000)]
Bug 36120: Account for both pickup_location and date selection in items
This patch ensures we account for both pickup location and date
selections having taken place before an item selection is pondered. We
now correctly disable item options given both conditions rather than it
being a race between the two.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Martin Renvoize [Fri, 8 Mar 2024 16:00:57 +0000 (16:00 +0000)]
Bug 36120: Ensure existing bookings are assigned a pickup library
Sponsored-by: Cuyahoga County Public Library Signed-off-by: Lisette Scheer <lisette.scheer@bywatersolutions.com> Signed-off-by: Kristi Krueger <kkrueger@cuyahogalibrary.org> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Martin Renvoize [Thu, 7 Mar 2024 17:34:35 +0000 (17:34 +0000)]
Bug 36120: Add pickup library to bookings list table
Sponsored-by: Cuyahoga County Public Library Signed-off-by: Lisette Scheer <lisette.scheer@bywatersolutions.com> Signed-off-by: Kristi Krueger <kkrueger@cuyahogalibrary.org> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Martin Renvoize [Thu, 7 Mar 2024 13:18:19 +0000 (13:18 +0000)]
Bug 36120: Add pickup locations to place bookings modal
This patch adds a call to /biblios/biblionumber/pickup_locations to
fetch valid pickup locations for the biblio.
Upon selecting a pickup location we adapt the item select to only allow
for selecting items returned as valid for pickup at the selected
location.
Sponsored-by: Cuyahoga County Public Library Signed-off-by: Lisette Scheer <lisette.scheer@bywatersolutions.com> Signed-off-by: Kristi Krueger <kkrueger@cuyahogalibrary.org> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Martin Renvoize [Thu, 7 Mar 2024 17:12:51 +0000 (17:12 +0000)]
Bug 36120: Add pickup_library support to bookings API
Sponsored-by: Cuyahoga County Public Library Signed-off-by: Lisette Scheer <lisette.scheer@bywatersolutions.com> Signed-off-by: Kristi Krueger <kkrueger@cuyahogalibrary.org> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Martin Renvoize [Thu, 7 Mar 2024 15:30:26 +0000 (15:30 +0000)]
Bug 36120: Add pickup_items to the pickup_locations response
This patch adds pickup_items as a list of itemnumbers that can be picked
from the library should it be selected as a pickup location.
Sponsored-by: Cuyahoga County Public Library Signed-off-by: Lisette Scheer <lisette.scheer@bywatersolutions.com> Signed-off-by: Kristi Krueger <kkrueger@cuyahogalibrary.org> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Martin Renvoize [Thu, 7 Mar 2024 17:06:52 +0000 (17:06 +0000)]
Bug 36120: Add pickup_library_id to bookings table
Sponsored-by: Cuyahoga County Public Library Signed-off-by: Lisette Scheer <lisette.scheer@bywatersolutions.com> Signed-off-by: Kristi Krueger <kkrueger@cuyahogalibrary.org> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Bug 36567: Get rid of Datetime warning in Circulation.t and dateexpiry.t
Running either t/db_dependent/Circulation.t or t/db_dependent/Circulation/dateexpiry.t
cause following error to be dispalyed:
You are creating a DateTime object with a far future year (9999) and a time
zone (Europe/Helsinki). If the time zone you specified has future DST changes
this will be very slow.
Smallest allowed value is 4999, so we need to use that rather than 9999 in tests.
To test prove t/db_dependent/Circulation.t and t/db_dependent/Circulation/dateexpiry.t.
Sponsored-by: Koha-Suomi Oy Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Pedro Amorim <pedro.amorim@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Nick Clemens [Mon, 22 Apr 2024 18:12:47 +0000 (18:12 +0000)]
Bug 36673: Filter used categories and item types to current branch
To test:
1 - Define some circulation rules for default and specific branches
2 - Apply patch
3 - Confirm rules display as before
PA amended:
- bug->Bug in commit title
- squashed tidy
Signed-off-by: Andrew Fuerste-Henry <andrewfh@dubcolib.org> Signed-off-by: Pedro Amorim <pedro.amorim@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Julian Maurice [Thu, 4 Apr 2024 14:26:00 +0000 (16:26 +0200)]
Bug 36526: Remove circular dependency from Koha::Objects
Koha::Objects depends on Koha::DateUtils, which depends on C4::Context,
which depends on Koha::Config::SysPrefs, which depends on Koha::Objects
Apart from the circular dependency, the dependency on C4::Context alone
is problematic as it loads a bunch of modules that are not needed at all
in Koha::Objects (YAML::XS and ZOOM for instance).
As Koha::Objects is used as a base for a lot of modules, we should take
care to only load the minimum required.
This patch removes uses of Koha::DateUtils from Koha::Objects.
It was only used in Koha::Objects::filter_by_last_update
filter_by_last_update now requires that the 'from' and 'to' parameters
must be DateTime objects. Previously it would also allow date and
datetime strings. This possibility was only used in two places:
* misc/cronjobs/cleanup_database.pl
* tools/cleanborrowers.pl
Now they call dt_from_string first and pass a DateTime object to
filter_by_last_update
Test plan:
1. Run `perl -cw Koha/Objects.pm`. It should only say:
"Koha/Objects.pm syntax OK" without warnings
2. Run `prove t/db_dependent/Koha/Objects.t`
3. Verify that misc/cronjobs/cleanup_database.pl works as before,
especially with the options --pseudo-transactions,
--pseudo-transactions-from and --pseudo-transactions-to
4. Go to Tools » Batch patron deletion and anonymization, check "Verify
you want to anonymize patron checkout history" and enter a date in
the text input below. Then click Next and verify that the correct
count of borrowers is shown. Click on the "Finish" button and verify
that the circulation history has been correctly anonymized
See also bug 36432
Signed-off-by: Tadeusz Sośnierz <tadeusz@sosnierz.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Shi Yao Wang [Tue, 30 Apr 2024 19:02:50 +0000 (15:02 -0400)]
Bug 36738: Don't copy date when repeating date fields
Make the repeatable date patron attribute empty when repeating the
inputs to avoid date formatting problems (and keeping past date value
after repeating is not something we want)
Test plan:
1- create a patron attribute type with is a date and repeatable checked
(administration -> patron attribute types)
2- add a couple of patron attribute of type date, notice the repeated
inputs contain previous data
3- Apply the patch
4- redo step 2 and notice the repeated inputs are empty
Follow up for bug 32610 (https://bugs.koha-community.org/bugzilla3/show_bug.cgi?id=32610)
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Martin Renvoize [Tue, 16 Apr 2024 17:22:41 +0000 (18:22 +0100)]
Bug 36612: Add public_read_list to Koha::Ticket
Without the public_read_list to define which fields should be accessible
from the public endpoints we will always return a 500 from the API on
otherwise successfull additions of tickets via the OPAC.
Test plan
1) Enable OPACCatalogConcerns
2) Login to the OPAC and "Report a concern"
3) Note the error message in the UI "There was an error when submitting
your concern, please contact a librarian."
4) Confirm that the concern is actually created regardless
5) Apply the patch here and restart plack
6) Submit another 'Report a concern' and now note the success message
"Your concern was successfully submitted."
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Kyle M Hall [Tue, 18 Jul 2023 13:07:59 +0000 (09:07 -0400)]
Bug 25159: Implement diffs in action logs for holds
Test Plan:
1) Apply this patch
2) Run updatedatabase.pl
3) Restart all the things!
4) Enable HoldsLog
5) Perform various hold related actions
6) Observe the diff column is populated by a JSON string
of the diff format generated by Struct::Diff
Signed-off-by: Kyle Hall <kyle@bywatersolutions.com> Signed-off-by: Andrew Fuerste-Henry <andrewfh@dubcolib.org> Signed-off-by: Emmi Takkinen <emmi.takkinen@koha-suomi.fi> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Kyle M Hall [Tue, 18 Jul 2023 13:06:36 +0000 (09:06 -0400)]
Bug 25159: Add ability to specify a pre-modified version of action log data and store as diff
Test Plan:
1) sudo cpanm Struct::Diff
2) prove t/db_dependent/Log.t
Signed-off-by: Kyle Hall <kyle@bywatersolutions.com> Signed-off-by: Andrew Fuerste-Henry <andrewfh@dubcolib.org> Signed-off-by: Emmi Takkinen <emmi.takkinen@koha-suomi.fi> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Kyle M Hall [Tue, 18 Jul 2023 11:00:50 +0000 (07:00 -0400)]
Bug 25159: DB Update
Signed-off-by: Kyle Hall <kyle@bywatersolutions.com> Signed-off-by: Andrew Fuerste-Henry <andrewfh@dubcolib.org> Signed-off-by: Emmi Takkinen <emmi.takkinen@koha-suomi.fi> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
projects / koha.git / log