]> git.koha-community.org Git - koha.git/log
koha.git
8 years agoBug 11606: Add Novelist client to staff
Nick Clemens [Fri, 27 May 2016 20:51:56 +0000 (16:51 -0400)]
Bug 11606: Add Novelist client to staff

To test:
1 - Apply patches
2 - Update database
3 - View detail pages for some records and ensure no changes have been made
4 - Enable NovelistSelectStaffEnabled (and enter or have info in the
        Profile and password)
5 - Set NovelistSelectStaffView to 'above'
6 - View detail pages for some records, verify that if novelist info is
available it is displyaed and nothign is displayed if not
7 - Repeat with all staff view options

Sponsored by:
   Walla Walla Public Library (http://www.wallawallapubliclibrary.org/)
   Los Gatos Library (http://www.losgatosca.gov/42/Los-Gatos-Library)

Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
Internal signoff.

Signed-off-by: Alexis Rodegerdts <arodegerdts@wallawallawa.gov>
Signed-off-by: Dwayne Nance <dnance@ebsco.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 7143 : More new devs
Chris Cormack [Mon, 4 Jul 2016 21:12:24 +0000 (09:12 +1200)]
Bug 7143 : More new devs

confirmed dates against emails and downloads.koha-community.org
Two names added correctly.

Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 7143 : Adding new developers
Chris Cormack [Mon, 20 Jun 2016 20:39:34 +0000 (08:39 +1200)]
Bug 7143 : Adding new developers

Claire Gravely seemed to be a cut and paste error.
June 3 better matches git log.
Three other names in history are in about as well.

Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 7143: [QA Follow-up] Adjusting developer information
Marcel de Rooy [Mon, 13 Jun 2016 06:36:48 +0000 (08:36 +0200)]
Bug 7143: [QA Follow-up] Adjusting developer information

For consistency we should not only add firstnames to the list of
developers in about.tt and history.txt.

Adding some surnames with the help of git log and Bugzilla. Also
corrected a closing li tag.
Note that I did not find one surname: Natasha of Catalyst Academy.
Probably Chris could add that missing piece.

NOTE: Natasha piece still needs clean up.

Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 16934: Add test for ModOrder
Jonathan Druart [Thu, 21 Jul 2016 17:23:00 +0000 (18:23 +0100)]
Bug 16934: Add test for ModOrder

Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 16934 - Cannot add notes to canceled and deleted order line
Kyle M Hall [Mon, 18 Jul 2016 11:02:14 +0000 (11:02 +0000)]
Bug 16934 - Cannot add notes to canceled and deleted order line

Some librarians would like to be able to add notes to deleted order
lines to keep track of data such as what title the order line was for.
For some reason ModOrder dies if a biblionumber is passed in, even
though it does not use biblionumber and does not need it to exist in any
fashion! This limitation should be removed.

Test Plan:
1) Create a basket with an orderline
2) Cancel the order / delete the record
3) Click the "Add internal note" link for that order line
4) Fill in a note and click "Save"
5) Note the error
6) Apply this patch
7) Repeat steps 3-4
8) Note this time the note is saved!

Signed-off-by: Claire Gravely <c.gravely@arts.ac.uk>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 16958: Fix XSS in opac-imageviewer.pl
Jonathan Druart [Fri, 22 Jul 2016 07:14:27 +0000 (08:14 +0100)]
Bug 16958: Fix XSS in opac-imageviewer.pl

Test plan:
Trigger
/opac-imageviewer.pl?biblionumber=14&imagenumber=7"><sCrIpT>alert(42)<%2fsCrIpT>

=> Without this patch you will see the JS alert
=> With this patch applied you won't see it

Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 16947: Can not modify patron messaging preferences
Marc [Thu, 21 Jul 2016 08:22:57 +0000 (10:22 +0200)]
Bug 16947: Can not modify patron messaging preferences

To verify:
- Set syspref 'EnhancedMessagingPreferences' to 'Allow'
- In staff client, go to a patron's detail page
- Edit Patron messaging preferences (using link below table)
- Save
Result: Form does not save, stays open
JavaScript error in intranet-tmpl/prog/js/members.js line 107
TypeError: document.form.password is undefined

To test:
- Apply patch
- Repeat steps above
- Verify that messaging preferences save as expected
- Verify that other patron modifications work as before

NOTE: remember to force reload of the javascripts.

Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 16716: Replaced wrong GROUP BY with DISTINCT
Srdjan [Mon, 13 Jun 2016 03:35:56 +0000 (15:35 +1200)]
Bug 16716: Replaced wrong GROUP BY with DISTINCT

Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 15974: Rancor: Correctly select existing authorized value
Jesse Weaver [Wed, 20 Jul 2016 22:51:45 +0000 (16:51 -0600)]
Bug 15974: Rancor: Correctly select existing authorized value

Test plan:
  1) Open up a record in Rancor with an itemtype besides the first in
     the list ('BK' in the sample itemtypes).
  2) It will show "Book" instead of the correct itemtype.
  3) Apply patch, reload the page.
  4) The correct itemtype should now show.

NOTE: The scope is only 942$c. This corrects that.

Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 16941: Can not add new patron in staff client
Marc Véron [Thu, 14 Jul 2016 13:50:22 +0000 (15:50 +0200)]
Bug 16941: Can not add new patron in staff client

To reproduce:
- Go to staff client Home > Patron
- New patron
- Choose a category and fill form, submit
Result: Form reloads, patron data are not saved.

To test:
- Apply patch
- Repeat steps above
- Verify that patron data are saved and the new patron's
  detail page displays
- Try to enter a duplicate patron (e.g. same surname, firstname
  and birthday as above)
- Verify that a duplicate message appears

Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works as advertised

Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 16913: Koha::Patrons - Remove GetBorrowersNamesAndLatestIssue
Jonathan Druart [Tue, 12 Jul 2016 07:37:33 +0000 (08:37 +0100)]
Bug 16913: Koha::Patrons - Remove GetBorrowersNamesAndLatestIssue

This subroutine has been added by
  commit 5904681faca77c87ff8071414d66e123a2d3baa9
  Date:   Wed Mar 19 10:11:12 2008 -0500
    CleanBorrowers fixing.
but has never been used.
It can be removed safely.

Test plan:
  git grep GetBorrowersNamesAndLatestIssue
should not return any results.

Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 16909: Koha::Patrons - Remove checkuniquemember
Jonathan Druart [Mon, 11 Jul 2016 22:07:34 +0000 (23:07 +0100)]
Bug 16909: Koha::Patrons - Remove checkuniquemember

C4::Members::checkuniquemember was not really nicely written, was only
used once and was not covered by tests.
I think it does not make sense to keep such complexity and have this
code in the subroutine/method.
Looking at this patch it seems that what this subroutine did can be done
easily in the pl script in few lines.

Test plan:
1/ Create 2 organisations with the same "surname": you should get a
warning.
2/ Create 2 patrons (non-organisation) with the same
surname/firstname/date of birth, you should get a warning

Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 16889: Remove C4::Items::biblioitems_columns and use Koha::Biblioitems->columns...
Jonathan Druart [Sat, 9 Jul 2016 13:37:46 +0000 (14:37 +0100)]
Bug 16889: Remove C4::Items::biblioitems_columns and use Koha::Biblioitems->columns instead

Test plan:
Add new rule to the "Automatic item modifications by age" tools
(tools/automatic_item_modification_by_age.pl) and make sure the columns
of the biblioitems table are correctly displayed in the 'Conditions'
dropdown list.

Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 16889: Remove C4::Items::columns and use Koha::Items->columns instead
Jonathan Druart [Sat, 9 Jul 2016 13:35:02 +0000 (14:35 +0100)]
Bug 16889: Remove C4::Items::columns and use Koha::Items->columns instead

Test plan:
Add new rule to the "Automatic item modifications by age" tools
(tools/automatic_item_modification_by_age.pl) and make sure the columns
of the items table are correctly displayed.

Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 16889: Remove C4::Members::columns and use Koha::Patrons->columns instead
Jonathan Druart [Sat, 9 Jul 2016 13:35:08 +0000 (14:35 +0100)]
Bug 16889: Remove C4::Members::columns and use Koha::Patrons->columns instead

Test plan:
Import some patrons (tools/import_borrowers.pl) and make sure it imports
the patrons correctly.

Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 16889: Add Koha::Objects->columns
Jonathan Druart [Sat, 9 Jul 2016 13:32:40 +0000 (14:32 +0100)]
Bug 16889: Add Koha::Objects->columns

Currently we have 3 subroutines to retrieve the columns of tables:
C4::Members::columns, C4::Items::columns and
C4::Items::biblioitems_columns.
It is easier to have a Koha::Objects->columns method to provide the
different classes to retrieve their related column names.

Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 16876: Remove Full Heading column from OPAC Auth search results
Aleisha [Thu, 7 Jul 2016 23:40:29 +0000 (23:40 +0000)]
Bug 16876: Remove Full Heading column from OPAC Auth search results

To test:

1) Go to Authority Search and do a search
2) Notice that there is a Full Heading column that has 'View full
   heading' links. These take up a lot of space and don't mean a lot to
   the user
3) Apply patch and refresh
4) Notice that the the Full Heading column is gone and there is now a
   Details column next to the authorities. Confirm the link takes you to
   the expected authority detail page.

Sponsored-by: Catalyst IT
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 16853: Move changepassword to Koha::Patron->update_password
Jonathan Druart [Mon, 4 Jul 2016 13:00:58 +0000 (14:00 +0100)]
Bug 16853: Move changepassword to Koha::Patron->update_password

This patch moves the code from C4::Members::changepassword to
Koha::Patron->update_password

Test plan:
Change your password at the OPAC and the staff interface
This should work as before

Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
I rebased this on top of 16849 because they were conflicting.
Tests pass, code looks good (as usual) and I checked both OPAC
and staff password change work as expected.

Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 16849: Move IsDebarred to Koha::Patron->is_debarred
Jonathan Druart [Mon, 4 Jul 2016 10:29:16 +0000 (11:29 +0100)]
Bug 16849: Move IsDebarred to Koha::Patron->is_debarred

In order to move IsMemberBlocked to Koha::Patron it makes sense to move
the code from Koha::Patron::Debarments::IsDebarred to
Koha::Patron->is_debarred.

Test plan:
1/ Add a restriction to a patron
2/ make sure he is not able to checkout items any more
3/ Make sure he cannot get a discharge
4/ Put a hold and make sure you get "Patron has restrictions"

Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 16681 - Allow update of opacnote via batch patron modification tool
Nick Clemens [Thu, 14 Jul 2016 15:45:54 +0000 (11:45 -0400)]
Bug 16681 - Allow update of opacnote via batch patron modification tool

To test:
1 - Select a batch of patrons (via list, saved file, and cardnumber
        entry)
2 - Verify you cannot edit 'opacnotes' field, nor can you see
'borrowernotes' field in table, though you can edit it
3 - Verify editing works as expected
4 - Apply patch
5 - Select a batch via each method as above
6 - Note both note columns display in table
7 - Note that you can edit or clear the opacnotes field as expected
8 - Verify other feautres work as previously

Sponsored by:
   Lancaster Theological Seminary (https://lancasterseminary.edu/)

Followed test plan, works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 16538: Improve the style of progress bars
Owen Leonard [Tue, 17 May 2016 15:18:14 +0000 (11:18 -0400)]
Bug 16538: Improve the style of progress bars

This patch updates the style of progress bars to make them a little
nicer. Progress bars in the staff client are not built in a consisten
way. Some have been updated to use the <progress> element and some have
not. This patch improves some styling common to both kinds.

Other changes:

- Redundant in-page CSS has been removed from many pages.
- An invalid "min" attribute has been removed from several instances of
  <progress>.
- Corrected capitalization.
- Fixed incorrectly quoted attributes.
- Added missing form "action" attributes.

To test, clear your browser cache if necessary. Apply the patch and
test uploads on the following pages:

- Circulation -> Offline circulation file upload
- Tools -> Batch item modification
- Tools -> Batch record modification
- Tools -> Stage MARC records for import
- Tools -> Manage staged MARC records
- Tools -> Upload local cover image
- Tools -> Upload

In all cases, progress bars should look improved and work correctly.

Test Tools -> Batch item deletion. Unused background job handling markup
has been removed. Deletion processing should work correctly.

Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works as advertised

Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 16531: Circ overdue report is showing an empty table if no overdues
Aleisha [Tue, 17 May 2016 04:46:31 +0000 (04:46 +0000)]
Bug 16531: Circ overdue report is showing an empty table if no overdues

EDIT: Comment 2
EDIT2: using noreport variable (Comment 5)

To test:
1) Ensure you have no items overdue
2) Go to Circ -> Circulation reports -> Overdues
3) Notice empty table, '0 items overdue' heading
4) Ensure syspref FilterBeforeOverdueReport is set to 'Don't require'
5) Apply patch and refresh page
6) Notice empty table is no longer showing and page says "There are no
   overdues"
7) Apply a filter to search
8) Page now says "There are no overdues matching your search" with a
   link to reset filter.
9) Click Reset filter -> confirm any filters you applied are cleared.
10) Set FilterBeforeOverdueReport to 'Require' and refresh overdue
    report
11) Page should say "Please choose one or more filters to proceed"
12) Check out an item to a member, ensure due date is a date that has
    passed (i.e. yesterday)
13) Refresh overdue report page
14) Page should still say "Please choose one or more filters to proceed"
15) Set FilterBeforeOverdueReport to 'Don't require'
16) Confirm table now shows correctly with '1 items overdue' heading
    etc.

Sponsored-by: Catalyst IT
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 15853 - Add author and link columns to opac course reserves table
Nick Clemens [Fri, 3 Jun 2016 18:49:25 +0000 (14:49 -0400)]
Bug 15853 - Add author and link columns to opac course reserves table

To test:
1 - Add some course reserves
2 - View the table in staff and opac, there is no column for author or
link
3 - Apply patch
4 - You shoudl see these columns
5 - Link should contain item uri if present, fallback to title 856$u,
  then be blank if niether

Sponsored by:
    Southeastern Wisconsin Information Technology Exchange, Inc (SWITCH)
    (http://caspian.switchinc.org/)

Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Might be good to add this table to the column visibility tool if you
plan to add more columns.

Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 16888: (follow-up)Add Font Awesome Icons to Members
Hector Castro [Mon, 11 Jul 2016 14:34:38 +0000 (08:34 -0600)]
Bug 16888: (follow-up)Add Font Awesome Icons to Members

Remove fa-ban according with QA comment 4

Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 16888: Add Font Awesome Icons to Members
Hector Castro [Fri, 8 Jul 2016 21:52:06 +0000 (15:52 -0600)]
Bug 16888: Add Font Awesome Icons to Members

Add Font Awesome Icons to:
- "Select/Clear all" links to pay.tt (Pay fines tab)
- "Filter icon" in "filter paid transactions" to Accout tab (boraccount.tt)
- "Trash icon" to Remove option in "Manual restrictions"
(borrower_debarments.inc) also add "Ban and plus icon" to "Add manual restriction"

To test:
-Apply patch
-Select a patron who has fines
-Go to "Fines->Pay fines" tabs and see the icons in "Select/Clear all"
-Choose the "Account" tab and sse the icon in "Filter paid transactions"
-Select the "Check out" tab and go to "Restrictions"
-Add a manual restriction and notice about the two new icons fa-plus and fa-band
-See the new button btn-mini and the fa-trash icon
-Verify that all works as expected

Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 16812: Revise JS script for z3950_search.tts and remove onclick events
Hector Castro [Fri, 24 Jun 2016 21:55:40 +0000 (15:55 -0600)]
Bug 16812: Revise JS script for z3950_search.tts and remove onclick events

Modify JS script to all templates for z3950_search.tt and reduce the
redundant code

This patch propose:
-z3950_auth_search.tt has various onclick events used in links.
 Also fix: acqui/z3950_search.tt and cataloguing/z3950_search.tt
-Trigger onclick events via JQuery .on()
-Make a separate .js and .inc file
-Reduce the number of line and redundant code
-Also add Font Awesome Icons to "Select/Clear all" and "Clear search
 form" links

To test:
1-Apply bug 16600 on top
2-Apply patch
3-Go to Authorities > click New from Z39.50
4-Fill some fields and click in "Clear search form" link
5-Search under "Dalton" or another author that launch too many headings
6-Clic in some heading and notice the dialog open, test: "Preview MARC",
  ISBD (when showed), "Import" and close the dialog "X". Use the
  "Import" from table too.
7-Use the "next/previous page" button, change "Go to page" to number in and
  out of the range presented, also test whit a letter, etc.

Go to Cataloging > New from Z39.50/SRU
Repeat steps 3 to 6. But this time with bib records.

Go to Adquisition > Open or Create a basket and choose to "Add to basket"
button. A modal appear, chose the option "Order from external source"
Repeat steps 3 to 6. But this thime with bib records.

NOTE: The icon trash for "Clear search form" has been selected according
with module "Advanced search" there is an icon trash with link "Clear
fields" that has the same fuctionality.
For some reason the image loading-small.gif does not charge all times
when the code is get out of the template. (Fixed with this new patch)
DataTable it is specific for each template

Sponsored-by: Universidad de El Salvador
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 16777: Correct intranet search alias
Marcel de Rooy [Mon, 20 Jun 2016 12:57:25 +0000 (14:57 +0200)]
Bug 16777: Correct intranet search alias

A long-standing typo in our apache config files:
[intranet]/search refers to search.pl (which does not exist)

This patch refers it to catalogue/search.pl

Test plan:
Run an install or copy the change from apache-shared-intranet.conf or
koha-httpd.conf to your apache config. Restart Apache and check
if http://[your staff client]/search works.

Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Tested by making manual changes according to the patch. Did not test a
new installation.

Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 16701: (follow-up) improve some changes
Hector Castro [Thu, 7 Jul 2016 15:13:30 +0000 (09:13 -0600)]
Bug 16701: (follow-up) improve some changes

Add missing quote in line 152
Modify title of the page and breadcrumbs section wrong "searchfield" used
should be instead "currency.currency"

To test
-Try to delete the active and used currency, for example, my case
 USD, look that appear USD' with the initial single quote missing in
 message Confirm deletion of currency USD'
-Notice about the breadcrumbs section appear:
     Confirm deletion of currency ''
 Should appear the currency
-Try to delete another currency see the pharese look the same
-Notice about the title in both cases, there is missing the currency name
-Apply follow-up and re-test

Sing-off on followup
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 16701: Translatability: Fix problem with isolated ' in currency.tt
Marc Véron [Tue, 21 Jun 2016 07:08:06 +0000 (09:08 +0200)]
Bug 16701: Translatability: Fix problem with isolated ' in currency.tt

This patch moves markup <span class="ex"> into template variables to
avoid sentence splitting.

To test:
- Apply patch
- Verify that currency administration works as before
  (Home > Administration > Currencies & Exchange rates > Currencies)
- Examine code changes

Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 16621: Translatability: Issues in opac-user.tt (sentence splitting)
Marc Véron [Fri, 10 Jun 2016 08:25:54 +0000 (10:25 +0200)]
Bug 16621: Translatability: Issues in opac-user.tt (sentence splitting)

This patch fixes issues due to sentence splitting in
koha-tmpl/opac-tmpl/bootstrap/en/modules/opac-user.tt

Note: This is a string patch. It does not add or change functionallity.

To test:
- Examine code and verify that the text changes remove sentence splitting
  and that the changes make sense.
- Log in to OPAC and verify that messages look correct
  - with blocked /debarred user (with and without comment and date)
  - with user who has to much fines (needs syspref OpacRenewalAllowed
    and syspref OPACFineNoRenewals)
  - with user who has his card marked as lost
  - with user with an account that is about to expire
  - with user with expired account
  - with user with uncertain address information (with and without
    syspref OPACPatronDetails set to Allow)

Note: Amended to make patch apply 2016-07-10 mv
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 16900 - Hold suspend button incorrectly styled in patron holds list
Owen Leonard [Mon, 11 Jul 2016 19:03:37 +0000 (15:03 -0400)]
Bug 16900 - Hold suspend button incorrectly styled in patron holds list

This patch updates the style of the suspend/resume button in the list of
holds displayed on the checkout page and on the patron detail page. The
button is now a Bootstrap-styled button with a Font Awesome icon.

To test, apply the patch and locate a patron who has holds.

- On the checkout page, view the 'Holds' tab and confirm that there is a
  correctly-styled 'Suspend' button for each hold.
- Verify that the button works correctly and looks correct when a hold
  has been suspended.

Signed-off-by: Arslan Farooq <arslanone@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 16897 - Re-focus on "Add item" in Lists
Fridolin Somers [Mon, 11 Jul 2016 14:31:18 +0000 (16:31 +0200)]
Bug 16897 - Re-focus on "Add item" in Lists

Bug 11325 add solved a focus on "Add item" missing in Lists page.
Since revamping of this page, the add item form exists both in page.
The one corrected by Bug 11325 is not visible because it checks a bad
var allowaddingitem instead of can_add_biblios.

This patch removes the first form and corrects the second form.
It moves the form at left part of page so that it is always shown
(usefull when there are a lot of items). It does not add the list name
after "Add item" besause it whould be huggly for long names and because
listname already exists in breadscrumbs and on top of the table.
It also adds autocomplete="off" on barcode input because there can be
problems with a scanning device.

Test instructions:
1. Create a list
2. Make sure you have an object with an assigned barcode
3. Go to the list
   => The barcode entry interface should be at left and has the focus
4. Enter the barcode and press enter (or use a scanner)
   => The item is added to the list

Signed-off-by: Owen Leonard <oleonard@myacpl.org>
This is a nice improvement, thanks!

Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 16893 - Missing closing tag disrupts patron checkouts page style
Katrin Fischer [Mon, 11 Jul 2016 20:56:11 +0000 (22:56 +0200)]
Bug 16893 - Missing closing tag disrupts patron checkouts page style

Same fix as for the details page: checkouts page is very italic
when there is a restriction with a comment on the patron
account.

Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 16893: Missing closing tag disrupts patron detail page style
Owen Leonard [Mon, 11 Jul 2016 12:51:12 +0000 (08:51 -0400)]
Bug 16893: Missing closing tag disrupts patron detail page style

A missing closing </i> causes the the patron detail page to be in all
italics if the patron has a restriction message. This patch corrects it.

To test, apply the patch and locate a patron who has a restriction
message. The restriction message should be in italics but the rest of
the page should display normally.

Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Rest of the page displayed normally

Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 16844: (follow-up of 15656) Remove export of GetMemberRelatives from C4::Members
Jonathan Druart [Mon, 4 Jul 2016 11:25:16 +0000 (12:25 +0100)]
Bug 16844: (follow-up of 15656) Remove export of GetMemberRelatives from C4::Members

Bug 15656 removed the C4::Members::GetMemberRelatives subroutine but the
module still exports it.

Test plan:
  git grep GetMemberRelatives
should not return any results.

Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 16813: Allow empty string for OPACBaseURL
Jonathan Druart [Mon, 27 Jun 2016 12:32:31 +0000 (13:32 +0100)]
Bug 16813: Allow empty string for OPACBaseURL

The pref is prefixed by 'http://', but it should not when the pref is
set to an empty string.
This will fix the bug raised on bug 14790 comment 14.

Test plan:
Empty OPACBaseURL and confirm that it's save as it in DB

Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
OPACBaseURL is saved up empty. Prefix http:// is not saved anymore

Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 14138: Patroncard: Warn user if PDF creation fails
Marc Véron [Tue, 5 Jul 2016 17:23:59 +0000 (19:23 +0200)]
Bug 14138: Patroncard: Warn user if PDF creation fails

Change patroncards/create-pdf.pl to redirect with an error message
instead of writing an invalid pdf that does not open in pdf viewer.

To test:
- Apply patch

- Test that pdf creator behaves as before (with valid batches and
  patron lists)

- While testing, copy pdf link address from window with title 'Click
  the following link(s) to download...'

- Open another staff client browser tab

- Paste link to browser address field, change batch id rsp. patron
  list id to an invalid value and submit

- The window should redirect to cgi-bin/koha/patroncards/create-pdf.pl
  and display an error message

- Bonus test 1: Create an empty patron list and test patron card
  creation. You should get an error message as appropriate.

- Bonus test 2: Use a link with params like the following:
  ...create-pdf.pl?borrower_number=61&template_id=2&layout_id=1&start_card=1
  Verify that you can create a pdf with a valid borrower_number and that
  you get the error message with an invalid borrower number

Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 16890: Make TestBuilder generate date for date columns (and not datetime)
Jonathan Druart [Sat, 9 Jul 2016 14:56:32 +0000 (15:56 +0100)]
Bug 16890: Make TestBuilder generate date for date columns (and not datetime)

TestBuilder should not generate datetime for date columns, but only for
datetime and timestamp columns.

Test plan:
Make sure the change in t/db_dependent/TestBuilder.t are consistent.
Before this patch, 1 of the 2 tests should fail.
After this patch applied, they both should pass.

Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 16845: Remove unused C4::Members::ModPrivacy
Jonathan Druart [Mon, 4 Jul 2016 12:22:18 +0000 (13:22 +0100)]
Bug 16845: Remove unused C4::Members::ModPrivacy

This subroutine is no longer in used and can be removed safely

Test plan:
  git grep ModPrivacy
should not return any occurrences.

Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 16810: Fines note not showing on checkout
Marc Véron [Mon, 4 Jul 2016 12:30:24 +0000 (14:30 +0200)]
Bug 16810: Fines note not showing on checkout

Fines did not show on patron checkout and detail pages unless amout
was greater than syspref NoIssueCharges.

This patch fixes the logic in
koha-tmpl/intranet-tmpl/prog/en/includes/blocked-fines.inc

Additionally, it changes links to buttons and makes some small
text changes to ease translation.

To test:
- Apply patch
- Display checkout or detail page and verify proper display for
   a patron who has
   - no fines (no message)
   - fines not exceeding syspref NoissueCharges (message)
   - fines exceeding syspref NoIssueCharges (message)

Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works as advertised

Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 16682: (followup) Fix display if Batch patron modification tool does not get...
Marc Véron [Tue, 5 Jul 2016 22:27:30 +0000 (00:27 +0200)]
Bug 16682: (followup) Fix display if Batch patron modification tool does not get any patrons

Format message as proposed in comment #8

Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 16682: Fix display if Batch patron modification tool does not get any patrons
Marc Véron [Tue, 5 Jul 2016 00:10:55 +0000 (02:10 +0200)]
Bug 16682: Fix display if Batch patron modification tool does not get any patrons

To reproduce:
- Go to Tools->Batch patron modification
- Submit without filling any of  "Use a file", "Or use a patron list",
  "Or list card numbers..." or use a patron lists with zero members
Result: Screen without any information

To test:
- Apply patch
- Repeat steps above
- Verify that you get a nice message
- Verify that the tool works as before
  - with invalid card numbers only
  - with valid and invalid card numbers
  - with valid card numbers only

Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 15006: [QA Follow-up] Only handle login requests in raw_transport
Marcel de Rooy [Wed, 13 Jul 2016 09:59:28 +0000 (11:59 +0200)]
Bug 15006: [QA Follow-up] Only handle login requests in raw_transport

Although mainly hypothetical, it would still be possible to get
response from the server for an acs resend request. (This exception
is allowed in MsgType::handle.)
I also noticed that the response may well be a message from an older
session still.
This patch just removes that exception by only passing login requests
to sub handle in the raw_transport loop.

Test plan:
[1] Verify normal login procedure for raw.
[2] Check a few acs resend requests in raw. They should terminate without
    a response.

Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 15006: [QA Follow-up] Satisfy qa tools with one tab less
Marcel de Rooy [Tue, 12 Jul 2016 13:48:34 +0000 (15:48 +0200)]
Bug 15006: [QA Follow-up] Satisfy qa tools with one tab less

Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 15006 Correct indentation of EXPORTs in Sip.pm
Colin Campbell [Wed, 6 Jul 2016 14:25:21 +0000 (15:25 +0100)]
Bug 15006 Correct indentation of EXPORTs in Sip.pm

Removed tabs and used spaces consistently
Used 'use base' to remove unnecessary BEGIN sub and
explicit setting of ISA at application level

Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 15006: Centralize timeout logic and allow zero client timeout
Marcel de Rooy [Wed, 6 Jul 2016 14:14:45 +0000 (15:14 +0100)]
Bug 15006: Centralize timeout logic and allow zero client timeout

Moving timeout logic to one routine (with unit test).

This further implements two suggestions from Kyle and Larry:

[1] You could use a client_timeout of 0 to specify no timeout at all.
[2] Have the client_timeout default to the timeout if not defined.

Test plan:
[1] Run t/db_dependent/SIP/SIPServer.t.
[2] Test login timeout for raw and telnet.
[3] Check ACS status message for timeout value. Should match policy
    timeout from institution.
[4] Test client timeout (zero and non-zero).
[5] Remove client timeout. Test fallback to service.
[6] Remove service timeout too. Test fallback to 30 at login.

Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Amended to incorporate Srdjan's suggestion to move get_timeout to
SIPServer.pm; this requires some additional mocking in the unit test.
And even makes the test db dependent, as documented.

Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 15006: Introduce client_timeout in SIPconfig.xml
Colin Campbell [Fri, 20 Nov 2015 12:12:48 +0000 (12:12 +0000)]
Bug 15006: Introduce client_timeout in SIPconfig.xml

Most selfchecks have persistent connections and send a
periodic status request at intervals (approx every 5mins appears
the norm) The timeout was dropping connections by default every 30secs
which for the client appears as a very flakey network.

This patch adds a separate parameter client_timeout that can be
used if you do want to force a disconnect if the client sends
no requests for a period. The sample config sets it to 600, but you
can also define a 0 value meaning no timeout. If the parameter is not
defined, it will fallback to service timeout.

Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Restored this patch from Colin in order to separate it from the
get_timeout patch. Adjusted the commit message slightly.
The original value of 600 from Colin's earlier patch may give less
discussion than setting to 0 (no timeout) in a later proposal.

Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 15006 Remove tabs from sip_protocol_loop
Colin Campbell [Tue, 5 Jul 2016 09:36:31 +0000 (10:36 +0100)]
Bug 15006 Remove tabs from sip_protocol_loop

Remove the tabs causing inconsistent indentation
of sip_protocol_loop and replace with spaces

Reimplements the renaining parts of Marcel de Rooy's
original QA patch

No logic changes in this patch - layout only

Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 15006 Drop raw connection if login fails
Colin Campbell [Mon, 4 Jul 2016 15:13:16 +0000 (16:13 +0100)]
Bug 15006 Drop raw connection if login fails

raw_connection was not behaving correctly if an invalid string was
passed or a login failed.
It was not checking that the login succeeded ( it checked that account
existed not that it contained data and it existed even if login failed)
and so failed logins instead of aborting immediately fell through into
the sip_protocol_loop, forcing that to timeout invalid connections.
It now checks that account has id set and returns if not.

The timeout alarm is now set on the while loop, in normal running this
should not be triggered as the socket is opened and the first data
should be a login message and the while loop should only iterate once,
but lets not go into an infinite loop due to unforeseen circumstances.

I have reindented the routine as the flow was not clear (the while was
not indented at all.

Also if using Net::Server::PreFork when a new connection comes in you
may be handed the the successful login parameters from a preceding call.
Because of this you could successfully transmit transactions and Koha
would carry them out without having received a valid login ( and
possibly with the wrong account details!) We now delete any existing
account for new connections.

NB: This patch requires that the patch for bug 13807 has been applied

Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 12178: Fix tests not to depend on dateformat syspref
Jonathan Druart [Tue, 21 Jun 2016 11:31:40 +0000 (12:31 +0100)]
Bug 12178: Fix tests not to depend on dateformat syspref

Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 12178: Tests for changes to claimed serial status
Florent Mara [Tue, 24 May 2016 02:10:32 +0000 (14:10 +1200)]
Bug 12178: Tests for changes to claimed serial status

Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Amended patch: Remove trailing spaces

Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 12178: Update serial status to "claimed" when exporting to CSV
Jonathan Druart [Tue, 28 Apr 2015 15:00:44 +0000 (17:00 +0200)]
Bug 12178: Update serial status to "claimed" when exporting to CSV

On the same way as late issues, the serial status should be updated to
'claimed' when the issues as exported as csv.

QA note: The updateClaim and UpdateClaimdateIssues subroutine did almost the
same thing, I kick the second on off to centralize the code.

Test plan:
1/ Export some late issues as CSV (serials/claims.pl).
2/ Refresh the page (the export does not do it) and confirm that the
status, the claim date and the claim count have been updated.
3/ Select some others issues, select a notice and send the notification.
Confirm that the behavior is the same.

Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 2735: CSS changes
Jonathan Druart [Thu, 9 Jun 2016 15:42:27 +0000 (16:42 +0100)]
Bug 2735: CSS changes

Signed-off-by: Nicole C Engard <nengard@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 2735: Fix authority search pagination at the OPAC
Jonathan Druart [Thu, 9 Jun 2016 15:39:56 +0000 (16:39 +0100)]
Bug 2735: Fix authority search pagination at the OPAC

The authority search pagination displays only 15 pages, even when there
are more.
To fix that, this patch mimic the authorities-home.pl intranet script to
manage the pagination.

Test plan:
Without this patch, do some authority search and click on different
pages.
Apply this patch, redo the same search and make sure the same records
are displayed (i.e. confirm that the pagination still works as before).

Signed-off-by: Nicole C Engard <nengard@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 16920: sysprefs.sql - missing comma for MaxOpenSuggestions
Mark Tompsett [Thu, 14 Jul 2016 02:46:17 +0000 (22:46 -0400)]
Bug 16920: sysprefs.sql - missing comma for MaxOpenSuggestions

TEST PLAN
---------
1) back up DB
2) drop database koha_library;
3) create database koha_library;
4) run web browser install, choose ALL defaults
   -- notice the SQL syntax warning.
5) apply patch
6) repeat steps 2-4
   -- notice SQL syntax warning is gone.
7) run koha qa test tools
8) restore db

Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 16917 - Error when importing patrons, Column 'checkprevcheckout' cannot be null
Kyle M Hall [Wed, 13 Jul 2016 15:41:30 +0000 (15:41 +0000)]
Bug 16917 - Error when importing patrons, Column 'checkprevcheckout' cannot be null

Error:
DBIx::Class::Storage::DBI::_dbh_execute(): Column 'checkprevcheckout'
cannot be null at C4/Members.pm line 697

Test Plan:
1) Attempt to import a patron via csv
2) Note the error
3) Apply this patch
4) Repeat the import
5) No error!

NOTE: Given that all the other tests ran (comment #2), except
      those in comment #3, I resorted to following the test plan
      above using the attachment provided in comment #5. I
      believe the issues in comment #3 constitute other bugs
      which need fixing and are unrelated this bug. Applying the
      patch does resolve the error triggered, and the code is
      good.

Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 16166: Fix t/Cache.t tests
Jacek Ablewicz [Tue, 26 Apr 2016 07:04:17 +0000 (09:04 +0200)]
Bug 16166: Fix t/Cache.t tests

Thou shalt not forget to include changes made in the t/Cache.t
in the patch set.

Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
8 years agoBug 16166: Improve L1 cache performance and safety
Jacek Ablewicz [Tue, 26 Apr 2016 06:43:12 +0000 (08:43 +0200)]
Bug 16166: Improve L1 cache performance and safety

Bug 16044 introduced two-level caching mechanism to Koha::Cache. By
default, get_from_cache() returns a deep copy of the data structures
stored in L1 cache (aka "safe mode"). For extremely big and/or complex
data structures (like MARC framework hash-of-hashes-of-hashes returned
by GetMarcStructure() ), deep-cloning is currently sub-optimal;
this patch addresses that particular issue. It also provides an
ability to intermix "safe" and "unsafe" cache feches, in such
way that they don't interfere with each other (i.e., eliminating
the risk involved with "unsafe" calls possibly compromising
further "safe" calls).

Test plan:

1) apply patch
2) flush L2 cache if necessary (restart memcached daemon)
3) profile GetMarcStructure() calls before / after patch, e.g. by
running some script which calls it often (like catalogue search
w/ XSLT processing turned on, etc.) - GetMarcStructure() should be
faster than before, in all possible circumstances (eg. 18 msec
per call -> 10 msec p/call)
4) after testing, before returning to the master branch, flush L2 cache
again (restart memcached daemon) - otherwise all system preferences
returned from L2 cache would be suffixed with '-CF0'

Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
8 years agoBug 13691: Add changes for 3.22
Jonathan Druart [Fri, 25 Mar 2016 17:04:14 +0000 (17:04 +0000)]
Bug 13691: Add changes for 3.22

To test:
Run the tests
t/db_dependent/selenium/basic_workflow.t

After you have set up selenium following the tests in the previous patch

Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
8 years agoBug 13691: Add basic selenium script
Jonathan Druart [Tue, 10 Feb 2015 15:07:31 +0000 (16:07 +0100)]
Bug 13691: Add basic selenium script

This script has been used to compare 3.16.x and 3.18.x performances on
bug 13690.

What it does:
- Go on the mainpage and process a log in
- Create a patron category
- Create a patron
- Add 3 items
- check the 3 items out to the patron
- check the 3 items in

How to use it?

$ wget https://selenium-release.storage.googleapis.com/2.53/selenium-server-standalone-2.53.0.jar

$ vim /etc/apt/sources.list.d/firefox.list
  deb http://packages.linuxmint.com debian import
$ apt-get update
$ apt-get install firefox
$ sudo apt-get install xvfb

$ SELENIUM_PATH=/home/koha/tools/selenium-server-standalone-2.53.0.jar
$ Xvfb :1 -screen 0 1024x768x24 2>&1 >/dev/null &
$ DISPLAY=:1 java -jar $SELENIUM_PATH

perl t/db_dependent/selenium/basic_workflow.t

Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Note the pages have changed so the tests will not all pass.
Also you need Selenium::Remote::Driver installed and staffClientBaseURL
must be set

I will change the tests in a follow up patch.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
8 years agoBug 13691: Remove existing selenium scripts
Jonathan Druart [Tue, 10 Feb 2015 15:07:16 +0000 (16:07 +0100)]
Bug 13691: Remove existing selenium scripts

They are not usable.

Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
8 years agoBug 13807 Rework main input loop in SIPServer
Colin Campbell [Fri, 6 Mar 2015 11:57:09 +0000 (11:57 +0000)]
Bug 13807 Rework main input loop in SIPServer

Debugging various problems in SIPServer and control of it, found it
could loop on unread buffers (e.g. the LF of a CRLF if it was only
expecting CR) making it unresponsive to signals.
Reworked the input loop with an eye to removing unnecessary whiles
and replacing the while(1) by a while( connection valid)
Enhanced the timeout code by wapping in an eval.
Moved the logic from SIP_read_packet into the server itself
Hopefully this makes the already baroque code easier to navigate
and it did seem the server was the logical place for this
Removed no longer iused SIP_read_packet from Sip.pm

Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 16866: Catch warning t/db_dependent/Languages.t
Mark Tompsett [Wed, 6 Jul 2016 19:19:46 +0000 (15:19 -0400)]
Bug 16866: Catch warning t/db_dependent/Languages.t

TEST PLAN
---------
1) prove t/db_dependent/Languages.t
   -- noisy output
2) apply patch
3) prove t/db_dependent/Languages.t
   -- no noise
4) run koha qa test tools.

Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
No noisy output

Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 16819: Remove use of map
Jonathan Druart [Sun, 3 Jul 2016 14:58:16 +0000 (15:58 +0100)]
Bug 16819: Remove use of map

Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 16819: C4::Members::DelMember should use Koha::Holds to delete holds
Tomas Cohen Arazi [Tue, 28 Jun 2016 13:18:48 +0000 (10:18 -0300)]
Bug 16819: C4::Members::DelMember should use Koha::Holds to delete holds

This patch makes C4::Members::DelMember proprely use Koha::Holds to delete
holds. This is important as holds actions are started to be logged.

To reproduce:
- Apply the patch
- Run:
  $ prove t/db_dependent/Members.t
=> SUCCESS: Tests pass
- Sign off :-D

Sponsored-by: NEKLS
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
All tests pass successfully

Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 16819: Unit tests for C4::Members::DelMember
Tomas Cohen Arazi [Tue, 28 Jun 2016 13:57:38 +0000 (10:57 -0300)]
Bug 16819: Unit tests for C4::Members::DelMember

The C4::Members::DelMember function actually deletes reserves, and it is
not properly tested.

To test:
- Apply the patch
- Run:
  $ prove  t/db_dependent/Members.t
=> SUCCESS: Tests pass
- Sign off

Sponsored-by: NEKLS
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 16805: Log in with database admin user breaks OPAC
Mark Tompsett [Thu, 23 Jun 2016 18:51:26 +0000 (14:51 -0400)]
Bug 16805: Log in with database admin user breaks OPAC

TEST PLAN
---------
1) Apply Jonathan's test patch
2) prove t/db_dependent/Letters.t
   -- dies before finishing tests
3) Apply second test patch
4) prove t/db_dependent/Letters.t
   -- dies before finishing tests
   -- 'addalert' is changed to 'getalert'
5) Log into OPAC with database admin user.
   -- see error given in comment #0
6) Apply this patch
7) prove t/db_dependent/Letters.t
   -- says 'getalert'
   -- all tests pass.
8) Log into OPAC with database admin user.
   -- logs in, but gives warning with a nice logout button.
9) run koha qa test tools.

Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
No kaha qa errors
In debian display diferent error:
Can't use an undefined value as an ARRAY reference at /usr/lib/perl5/DBI.pm line 2054.
Works as advertised

NOTE: Revised test plan, as Jonathan added useful test case.
      Works as I've tested above.
      Hector tested older test plan which was steps
      5,6,8 and 9.

      Revised test plan again while tweaking to address comment #9.

Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 16805: Tweak new test message to say getalert
Mark Tompsett [Fri, 24 Jun 2016 16:28:27 +0000 (12:28 -0400)]
Bug 16805: Tweak new test message to say getalert

It said 'addalert', which is likely a cut-paste typo.
Plus, let's keep running the other tests if that one
goes bad.

TEST PLAN
---------
1) Apply Jonathan's test patch
2) prove t/db_dependent/Letters.t
   -- dies before finishing tests
3) Apply this test patch
4) prove t/db_dependent/Letters.t
   -- still dies before finished tests,
      'addalert' now is 'getalert' in message.
5) run koha qa test tools.

Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 16805: Add test to getalert (no param passed)
Jonathan Druart [Fri, 24 Jun 2016 16:02:59 +0000 (17:02 +0100)]
Bug 16805: Add test to getalert (no param passed)

TEST PLAN
---------
1) apply patch
2) prove t/db_dependent/Letters.t
   -- fails
3) run koha qa test tools

Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 16801 - Include Font Awesome Icons to check/unchek all in Administration > Librar...
Hector Castro [Wed, 22 Jun 2016 17:11:03 +0000 (11:11 -0600)]
Bug 16801 - Include Font Awesome Icons to check/unchek all in Administration > Library transfer limits

For purpose to uniformity and leave just one entry in .po files,
this patch change: Check all/Uncheck all -> to -> Select all/Clear all.
Also added Font Awesome icons.

To test:
-Go to Administration > Library transfer limits
-Notice about Check all/Uncheck all for "For all items types" and
 "Policy for:"
-Apply patch and refresh the screen
-Notice about the new Select all/Clear all links with their icons
-Confirm that all links work as expected

Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 16778: Replace usage of Greybox modals with Bootstrap modals
Owen Leonard [Wed, 1 Jun 2016 14:54:09 +0000 (10:54 -0400)]
Bug 16778: Replace usage of Greybox modals with Bootstrap modals

This patch is a proof-of-concept for replacing Greybox modals in
situations where in-modal page transitions happen. This one addresses
patron card export from the patron lists page.

To test you must have at least one patron lists containing patrons.

- Apply the patch and go to Patrons -> Patron lists.
- In the 'Actions' menu associated with your list, choose 'Print patron
  cards.' A modal window should be triggered.
- In the modal window, change settings as necessary and click the
  "Export" button.
- The modal should reload and display a link to download a PDF. Confirm
  that the PDF download works correctly and that the correct patron
  batch was processed.
- Repeat the process and confirm at each step that clicking the 'X'
  button or the 'Cancel' link dismisses the modal window.

To confirm that changes to the patron card print template has not
adversely affected printing patron cards from the patron card creator
page:

- Go to Tools -> Patron card creator.
- Choose Manage -> Card batches.
- Click 'Export' for any batch.
- Confirm that the Greybox modal still works correctly for patron card
  export.

Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works as advertised

Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 16730 - Use member-display-address-style*-includes in moremember-brief.tt
Marc Véron [Tue, 14 Jun 2016 06:41:03 +0000 (08:41 +0200)]
Bug 16730 - Use member-display-address-style*-includes in moremember-brief.tt

To test:
- Apply patch
- Create a new patron with the same first and last name as an existing
  patron. This should trigger a duplicate warning message. Click the
  "View existing record" link to trigger a pop-up window with a patron
  detail brief view.
- Verify that the address information displays the same way as on the
  patron details screen (moremember.pl).
- Change syspref 'AddressFormat' and verify that the address displays
  as appropriate.

Signed-off-by: Frédéric Demians <f.demians@tamil.fr>
  Works as described: AddressFormat is taken into account on 'view exiting
  record' dialog box.

Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 16677 - Use abbr for authorities linked headings
Fridolin Somers [Tue, 7 Jun 2016 07:27:15 +0000 (09:27 +0200)]
Bug 16677 - Use abbr for authorities linked headings

In authorities search results, UNIMARC flavour, linked headings are displayed
with a link type : BT, NT, UF, RT.

This patch adds a abbr tag around those acronyms to know there meaning :
BT = Broader Term
NT = Narrower Term
UF = Used For
RT = Related Term

Acronyms are used because there can be a lot of linked headings, using abbr
will display the complete text on mouse over.

Test plan :

- Use UNIMARC database
- Create an authority with :
250 $a Heading250a
450 $a Heading450a
550 $5 a $a Heading550a
550 $5 g $a Heading550g
550 $5 h $a Heading550h
- Save an index zebraqueue
- Go to intranet authorities search
- Search for "Heading250a"
- You see :
Heading250a
Heading250a
UF: Heading450a
RT: Heading550a ; BT: Heading550g ; NT: Heading550h
- Move your mouse over the acronyms, you see a tip with the complete text
- Same with opac authorities search

Signed-off-by: Frédéric Demians <f.demians@tamil.fr>
  Works as described. Translatable.

Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 16566 [Revised] 'Print slip' button formatting inconsistent
Owen Leonard [Mon, 23 May 2016 15:03:48 +0000 (11:03 -0400)]
Bug 16566 [Revised] 'Print slip' button formatting inconsistent

This patch modifies the style of some "print slip" links on the checkin
page to make them consistent with other buttons shown in dialogs.

This patch also removes the use of "onclick" in some places in favor of
defining events in the JavaScript.

To test apply the patch and go to Circulation -> Check in.

- Check in an item which belongs at another branch. You should see a
  dialog which asks the user to transfer the item. Confirm that the
  "Print slip" button looks correct and works correctly.

- Check in the same item again. You should see a different dialog which
  has both a "Print transfer slip" and "Cancel transfer" button. The
  "Print transfer slip" button should look correct and work correctly.

- Check in an item which is part of a rotating collection. (Or, if Bug
  16570 is still open, check in any item) You should see a dialog which
  notifies you that the item is part of a rotating collection. The
  "Print slip" button in this dialog should look correct and work
  correctly.

Followed test plan. Buttons appear as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Revision following QA: Removed redundant class attribute from the print
button tested in step 1.

Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 16324: Move item search into header
Aleisha [Thu, 21 Apr 2016 22:49:29 +0000 (22:49 +0000)]
Bug 16324: Move item search into header

This patch makes the Search button in the header into a dropdown that holds the Advanced search and the Item search.
I have rewritten this patch to be independent of Bug 16323 since that patch is so controversial.

To test:
1) Confirm that Advanced search and Item search are both under the 'Search' dropdown menu in the header and both links work as expected

Sponsored-by: Catalyst IT
Signed-off-by: Claire Gravely <c.gravely@arts.ac.uk>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Note that the CAN_user_catalogue test is useless. If a librarian does
not have it, (s)he cannot access to the staff interface.

Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 16271: Allow more filters on /api/v1/holds
Julian Maurice [Fri, 15 Apr 2016 08:49:29 +0000 (10:49 +0200)]
Bug 16271: Allow more filters on /api/v1/holds

borrowernumber parameter is no longer required and you can filter on
every column of reserves table

Some example requests
- GET /api/v1/holds
- GET /api/v1/holds?biblionumber=123
- GET /api/v1/holds?borrowernumber=456
- GET /api/v1/holds?priority=0&found=W

Signed-off-by: Benjamin Rokseth <benjamin.rokseth@kul.oslo.kommune.no>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 15172: (follow-up)Serial enumchron/sequence not visible when returning/checking...
Hector Castro [Wed, 2 Dec 2015 16:56:25 +0000 (10:56 -0600)]
Bug 15172: (follow-up)Serial enumchron/sequence not visible when returning/checking in Items

Display br and span tag only if the value enumchron exists.

To test
-Apply patches
-Follow the previous test plan
-Checkin whichever material (e.g., book) without sequence or enumchrom
-Open up source code for checkin page, search under title and
verify that b and span tags do not appear

Signed-off-by: Alain et Aurélie <aurelie.berut@enssib.fr>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 15172: Serial enumchron/sequence not visible when returning/checking in Items
Olli-Antti Kivilahti [Wed, 11 Nov 2015 11:23:15 +0000 (13:23 +0200)]
Bug 15172: Serial enumchron/sequence not visible when returning/checking in Items

Displays the items.enumchron-column in returns.pl when checking in Items.

Rewording commit

To test:
-Checkout a barcode for serial with items generated in
Serials >  New subscription or item in DB with items.enumchron-column
-Checkin the same barcode, the table Checked-in items will appear without
information about "Publications details (Vol. 400, No. 32)"
-Apply patch
-Checkout and checkin another item of the same serial title
-Notice about the Vol. 400, No. 32 below the serial title.

Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
items.enumchron-column display successful in returns.pl (Home>Circulation>
Check in)
NOTE: Patch rebased on master

Signed-off-by: Alain et Aurélie <aurelie.berut@enssib.fr>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 15128 - DBRev 15128
Kyle M Hall [Fri, 8 Jul 2016 14:11:42 +0000 (14:11 +0000)]
Bug 15128 - DBRev 15128

Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 15128: Do not display "New suggestion" if limit has just been reached
Jonathan Druart [Fri, 1 Jul 2016 16:00:39 +0000 (17:00 +0100)]
Bug 15128: Do not display "New suggestion" if limit has just been reached

If limit is X and patrons has X-1 pending suggestions, when a new one is
added, the "New suggestion" should not been added.
to avoid another call to SearchSuggestions, we assume than the
suggestion has been correctly added.

Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 15128: Revert Display all purchase suggestions whether or not suggestion was...
Jonathan Druart [Fri, 1 Jul 2016 15:55:39 +0000 (16:55 +0100)]
Bug 15128: Revert Display all purchase suggestions whether or not suggestion was added

This does not work correctly and should be handle on another bug report.
The behavior existed prior to this patchset.

Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 15128 - (QA Followup) Don't get patrons suggestions if limit not set
Nick Clemens [Fri, 1 Jul 2016 15:39:00 +0000 (11:39 -0400)]
Bug 15128 - (QA Followup) Don't get patrons suggestions if limit not set

Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 15128 - (QA Followup) Fix use of 'my' variable causing loss of data
Nick Clemens [Fri, 1 Jul 2016 15:36:02 +0000 (11:36 -0400)]
Bug 15128 - (QA Followup) Fix use of 'my' variable causing loss of data

Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 15128 (QA Followup) Display all purchase suggestions whether or not suggestion...
Nick Clemens [Thu, 30 Jun 2016 14:20:39 +0000 (10:20 -0400)]
Bug 15128 (QA Followup) Display all purchase suggestions whether or not suggestion was added Correct enforcement of 0 limit

Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 15128 - Followup
Nick Clemens [Mon, 20 Jun 2016 20:04:21 +0000 (16:04 -0400)]
Bug 15128 - Followup

Only check limit for signed in borrower
Show all suggestions after a new one is added

Signed-off-by: Barbara Walters <bwalters@ncrl.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 15128 [QA Followup 2] - Only count pending suggestions for the limit
Kyle M Hall [Mon, 20 Jun 2016 19:25:12 +0000 (19:25 +0000)]
Bug 15128 [QA Followup 2] - Only count pending suggestions for the limit

Signed-off-by: Barbara Walters <bwalters@ncrl.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 15128 [QA Followup] - Make suggestion display after being added
Kyle M Hall [Mon, 20 Jun 2016 16:44:38 +0000 (16:44 +0000)]
Bug 15128 [QA Followup] - Make suggestion display after being added

Also fixes the issue that the add suggestion link would sometimes
show even if the patron could not make an additional suggestion.

Signed-off-by: Barbara Walters <bwalters@ncrl.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 15128 - Add ability to limit patrons open purchase suggestions
Nick Clemens [Tue, 14 Jun 2016 20:47:43 +0000 (16:47 -0400)]
Bug 15128 - Add ability to limit patrons open purchase suggestions

To test:
1 - Define a number of MaxOpenSuggestions
2 - Add some suggestions for a patron
3 - Note they cannot add any more suggestions if limit is reached
4 - Delete a suggestion and note you can add another
5 - Add them to limit again
6 - Accept a suggestion in the staff client and note user can add more
7 - Repeat above with rejecting or deleting
8 - Sign off.

Sponsored by:
    North Central Regional Library (http://ncrl.org/)

Signed-off-by: Barbara Walters <bwalters@ncrl.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 14902 - Fix issues with updatedatabase.pl
Kyle M Hall [Fri, 8 Jul 2016 14:01:41 +0000 (14:01 +0000)]
Bug 14902 - Fix issues with updatedatabase.pl

Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 14902 - DBRev 16.06.00.009
Kyle M Hall [Fri, 8 Jul 2016 13:59:37 +0000 (13:59 +0000)]
Bug 14902 - DBRev 16.06.00.009

Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 14902 - Add qualifier menu to staff side "Search the Catalog"
Nick Clemens [Fri, 3 Jun 2016 16:52:01 +0000 (12:52 -0400)]
Bug 14902 - Add qualifier menu to staff side "Search the Catalog"

To test:
1 - Apply patch and update dabase
2 - Check that Search the Catalog links throughout the staff interface
have not changed
3 - Set "IntranetCatalogSearchPulldown" to 'Show'
4 - Verify that 'Search the catalog' links through staff client now have
a dropdwon to  select search index

I think viewing one file each that includes updated header should be
sufficient, but please check as many as you can:

cgi-bin/koha/admin/aqbudgetperiods.pl
cgi-bin/koha/admin/admin-home.pl
cgi-bin/koha/cataloguing/addbooks.pl
cgi-bin/koha/circ/returns.pl
cgi-bin/koha/circ/circulation-home.pl
cgi-bin/koha/admin/cities.pl
cgi-bin/koha/admin/aqcontract.pl
cgi-bin/koha/admin/currency.pl
cgi-bin/koha/mainpage.pl
cgi-bin/koha/tools/letter.pl
cgi-bin/koha/members/members-home.pl
cgi-bin/koha/admin/categories.pl
cgi-bin/koha/admin/preferences.pl
cgi-bin/koha/admin/printers.pl
cgi-bin/koha/serials/serials-home.pl
cgi-bin/koha/acqui/newordersuggestion.pl
cgi-bin/koha/admin/z3950servers.pl

Sponsored by:
  Northeast Kansas Library System (http://nekls.org/)

Signed-off-by: Heather Braum <hbraum@nekls.org>
Signed-off-by: Barton Chittenden <barton@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 14790 [QA Followup] - Don't show links unless OPACBaseURL is set
Kyle M Hall [Thu, 23 Jun 2016 14:45:34 +0000 (14:45 +0000)]
Bug 14790 [QA Followup] - Don't show links unless OPACBaseURL is set

Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 14790 - Add OPAC view link to Serials detail
Kyle M Hall [Wed, 15 Jun 2016 14:30:18 +0000 (14:30 +0000)]
Bug 14790 - Add OPAC view link to Serials detail

Test Plan:
1) Apply this patch
2) Browse to subscription-detail.pl for a given serial
3) Note the new "OPAC view" link
4) Click the link, a new tab should open up showing the record
   details for that record in the OPAC

Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 14790 - Add OPAC view link to items editor
Kyle M Hall [Wed, 15 Jun 2016 13:55:28 +0000 (13:55 +0000)]
Bug 14790 - Add OPAC view link to items editor

Test Plan:
1) Apply this patch
2) Find a record and open the items editor for it
3) Click the "Actions" button for an item
4) Choose the option "OPAC view"
5) A new browser tab should open to the OPAC details page for the record
   whose items you are editing.

Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 14790 - Add Opac view link to search results
Kyle M Hall [Wed, 15 Jun 2016 12:27:40 +0000 (12:27 +0000)]
Bug 14790 - Add Opac view link to search results

Test Plan:
1) Apply this patch
2) Perform a staff catalog search
3) Note the new "OPAC view" link
4) Click the link, it should open a new tab to the OPAC details for that
   record.

This works fine except that it doesn't open in a new tab. I don't think
it's the fault of the patch, but of browser.js messing with links again
(See Bug 11937).

Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 14757: Remove obsolete occurrence of is_tt
Jonathan Druart [Tue, 28 Jun 2016 13:37:57 +0000 (14:37 +0100)]
Bug 14757: Remove obsolete occurrence of is_tt

Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 14757 [QA Followup] - Don't overload new for Modifications
Kyle M Hall [Mon, 27 Jun 2016 13:43:59 +0000 (13:43 +0000)]
Bug 14757 [QA Followup] - Don't overload new for Modifications

Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 14757: Add tests for new modules
Jonathan Druart [Fri, 24 Jun 2016 14:28:43 +0000 (15:28 +0100)]
Bug 14757: Add tests for new modules

Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 14757 [QA Followup] - Add Unit Tests
Kyle M Hall [Fri, 22 Jan 2016 12:43:12 +0000 (12:43 +0000)]
Bug 14757 [QA Followup] - Add Unit Tests

Signed-off-by: Sean McGarvey <seanm@pascolibraries.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>