1 # Copyright 2007 MJ Ray
3 # This file is part of Koha.
5 # Koha is free software; you can redistribute it and/or modify it under the
6 # terms of the GNU General Public License as published by the Free Software
7 # Foundation; either version 2 of the License, or (at your option) any later
10 # Koha is distributed in the hope that it will be useful, but WITHOUT ANY
11 # WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
12 # A PARTICULAR PURPOSE. See the GNU General Public License for more details.
14 # You should have received a copy of the GNU General Public License along with
15 # Koha; if not, write to the Free Software Foundation, Inc., 59 Temple Place,
16 # Suite 330, Boston, MA 02111-1307 USA
18 # Current maintainer MJR http://mjr.towers.org.uk/
19 # See http://www.koha.org/wiki/?page=KohaInstaller
24 use ExtUtils::MakeMaker;
29 die "perl 5.6.1 or later required" unless ($] >= 5.006001);
31 # Hash up directory structure & files beginning with the directory we were called from (should be the base of koha)...
33 my $dirtree = hashdir('.');
38 Makefile.PL - Koha packager and installer
42 =head2 BASIC INSTALLATION
48 =head2 PACKAGING RELEASE TARBALLS
59 This is a packager and installer that uses
60 ExtUtils::MakeMaker, which is fairly common
62 As well as building tar or zip files
63 and installing with the above commands,
64 it allows us to check pre-requisites
65 and generate configuration files.
69 =head2 NAME, VERSION_FROM, ABSTRACT, AUTHOR
71 Basic metadata about this software.
75 Suppress generation of META.yml file.
79 Hash of perl modules and versions required.
87 This is a hash of PL scripts to run after installation and
88 the files to ask them to generate.
89 Maybe use the values from CONFIGURE
90 to generate initial configuration files in future.
96 This is a hash mapping directories and files in the
97 source tree to installation target directories. The rules
102 =item If a directory or file is specified, it and its
103 contents will be copied to the installation target directory.
105 =item If a subdirectory of a mapped directory is specified,
106 its target overrides the parent's target for that subdirectory.
108 =item The value of each map entry may either be a scalar containing
109 one target or a reference to a hash containing 'target' and 'trimdir'
112 =item Any files at the top level of the source tree that are
113 not included in the map will not be installed.
115 =item Any directories at the top level of the source tree
116 that are not included in the map will be installed in
117 INTRANET_CGI_DIR. This is a sensible default given the
118 current organization of the source tree, but (FIXME) it
119 would be better to reorganize the source tree to better
120 match the installation system, to allow adding new directories
121 without having to adjust Makefile.PL each time. The idea
122 is to make the C<$target_map> hash as minimal as possible.
126 The permitted installation targets are:
130 =item INTRANET_CGI_DIR
132 CGI scripts for intranet (staff) interface.
134 =item INTRANET_TMPL_DIR
136 HTML templates for the intranet interface.
138 =item INTRANET_WWW_DIR
140 HTML files, images, etc. for DocumentRoot for the intranet interface.
144 CGI scripts for OPAC (public) interface.
148 HTML templates for the OPAC interface.
152 HTML files, images, etc. for DocumentRoot for the OPAC interface.
154 =item PERL_MODULE_DIR
156 Perl modules (at present just the C4 modules) that are intimately
157 tied to Koha. Depending on the installation options, these
158 may or may not be installed one of the standard directories
159 in Perl's default @LIB.
163 Directory for Koha configuration files.
167 Directory for Zebra configuration files.
171 Directory for Zebra's lock files.
175 Directory for Zebra's data files.
179 Directory for Zebra's UNIX-domain sockets.
183 Directory for example configuration files. This directory
184 exists primarily to make it easier to change the
185 MARC format or language of the active Zebra
190 Directory for command-line scripts and daemons.
194 Directory for man pages created from POD -- will mostly
195 contain information of interest to Koha developers.
199 Directory for Koha documentation accessed from the
200 command-line, e.g., READMEs.
204 Directory for Apache and Zebra logs produced by Koha.
208 This is a dummy target used to explicitly state
209 that a given file or directory is not to be installed.
210 This is used either for parts of the installer itself
211 or for development tools that are not applicable to a
212 production installation.
219 './about.pl' => 'INTRANET_CGI_DIR',
220 './acqui' => 'INTRANET_CGI_DIR',
221 './admin' => 'INTRANET_CGI_DIR',
222 './authorities' => 'INTRANET_CGI_DIR',
223 './C4' => 'PERL_MODULE_DIR',
224 './C4/SIP/t' => 'NONE',
225 './C4/SIP/koha_test' => 'NONE',
226 './C4/tests' => 'NONE',
227 './catalogue' => 'INTRANET_CGI_DIR',
228 './cataloguing' => 'INTRANET_CGI_DIR',
229 './changelanguage.pl' => 'INTRANET_CGI_DIR',
230 './check_sysprefs.pl' => 'NONE',
231 './circ' => 'INTRANET_CGI_DIR',
232 './edithelp.pl' => 'INTRANET_CGI_DIR',
233 './etc' => { target => 'KOHA_CONF_DIR', trimdir => -1 },
234 './etc/zebradb' => { target => 'ZEBRA_CONF_DIR', trimdir => -1 },
235 './help.pl' => 'NONE', # FIXME
236 './installer-CPAN.pl' => 'NONE',
237 './installer' => 'INTRANET_CGI_DIR',
238 './koha-tmpl/errors' => {target => 'INTRANET_CGI_DIR', trimdir => 2},
239 './koha-tmpl/intranet-tmpl' => {target => 'INTRANET_TMPL_DIR', trimdir => -1},
240 './koha-tmpl/opac-tmpl' => {target => 'OPAC_TMPL_DIR', trimdir => -1},
241 './kohaversion.pl' => 'INTRANET_CGI_DIR', # FIXME this may need to be in OPAC_CGI_DIR as well, with an update to C4::Context
242 './labels' => 'INTRANET_CGI_DIR',
243 './mainpage.pl' => 'INTRANET_CGI_DIR',
244 './Makefile.PL' => 'NONE',
245 './MANIFEST.SKIP' => 'NONE',
246 './members' => 'INTRANET_CGI_DIR',
247 './misc' => { target => 'SCRIPT_DIR', trimdir => -1 },
248 './misc/info' => { target => 'DOC_DIR', trimdir => 2 },
249 './misc/release notes' => { target => 'DOC_DIR', trimdir => 2 },
250 './misc/translator' => { target => 'EXAMPLE_DIR', trimdir => 2 },
251 './misc/installer_devel_notes' => 'NONE',
252 './opac' => 'OPAC_CGI_DIR',
253 './README.txt' => 'NONE',
254 './reports' => 'INTRANET_CGI_DIR',
255 './reserve' => 'INTRANET_CGI_DIR',
256 './reviews' => 'INTRANET_CGI_DIR',
257 './rewrite-config.PL' => 'NONE',
258 './reviews' => 'INTRANET_CGI_DIR',
259 './rss' => 'NONE', # FIXME deal with a little later
260 './serials' => 'INTRANET_CGI_DIR',
262 './skel/var/run/koha/zebradb' => { target => 'ZEBRA_RUN_DIR', trimdir => -1 },
263 './skel/var/lock/koha/zebradb/authorities' => { target => 'ZEBRA_LOCK_DIR', trimdir => 6 },
264 './skel/var/lib/koha/zebradb/authorities/key' => { target => 'ZEBRA_DATA_DIR', trimdir => 6 },
265 './skel/var/lib/koha/zebradb/authorities/register' => { target => 'ZEBRA_DATA_DIR', trimdir => 6 },
266 './skel/var/lib/koha/zebradb/authorities/shadow' => { target => 'ZEBRA_DATA_DIR', trimdir => 6 },
267 './skel/var/lib/koha/zebradb/authorities/tmp' => { target => 'ZEBRA_DATA_DIR', trimdir => 6 },
268 './skel/var/lock/koha/zebradb/biblios' => { target => 'ZEBRA_LOCK_DIR', trimdir => 6 },
269 './skel/var/lib/koha/zebradb/biblios/key' => { target => 'ZEBRA_DATA_DIR', trimdir => 6 },
270 './skel/var/lib/koha/zebradb/biblios/register' => { target => 'ZEBRA_DATA_DIR', trimdir => 6 },
271 './skel/var/lib/koha/zebradb/biblios/shadow' => { target => 'ZEBRA_DATA_DIR', trimdir => 6 },
272 './skel/var/lib/koha/zebradb/biblios/tmp' => { target => 'ZEBRA_DATA_DIR', trimdir => 6 },
273 './sms' => 'INTRANET_CGI_DIR',
274 './suggestion' => 'INTRANET_CGI_DIR',
275 './svc' => 'INTRANET_CGI_DIR',
277 './tmp' => 'NONE', # FIXME deal with later
278 './tools' => 'INTRANET_CGI_DIR',
279 './virtualshelves' => 'INTRANET_CGI_DIR',
280 # ignore files and directories created by the install itself
281 './pm_to_blib' => 'NONE',
285 =head1 CONFIGURATION OPTIONS
287 The following configuration options are used by the installer.
293 Specifies whether installation will be FHS-compliant (default,
294 assumes user has root), put everything under
295 a single directory (for users installing on a web host
296 that allows CGI scripts and a MySQL database but not root
297 access), or development (for a developer who wants to run
298 Koha from a git clone with no fuss).
302 Directory under which most components will go. Default
303 value will vary depending on INSTALL_MODE.
307 Whether to install Zebra configuration files and data
310 =item ZEBRA_MARC_FORMAT
312 Specifies format of MARC records to be indexed by Zebra.
316 Specifies primary language of records that will be
323 # default configuration options
324 my %config_defaults = (
325 'INSTALL_MODE' => 'standard',
326 'INSTALL_BASE' => '/usr/share/koha',
327 'DB_TYPE' => 'mysql',
328 'DB_HOST' => 'localhost',
330 'DB_USER' => 'kohaadmin',
331 'DB_PASS' => 'katikoan',
332 'INSTALL_ZEBRA' => 'yes',
333 'ZEBRA_MARC_FORMAT' => 'marc21',
334 'ZEBRA_LANGUAGE' => 'en',
335 'ZEBRA_USER' => 'kohauser',
336 'ZEBRA_PASS' => 'zebrastripes',
337 'KOHA_USER' => 'koha',
338 'KOHA_GROUP' => 'koha',
341 # valid values for certain configuration options
342 my %valid_config_values = (
343 'INSTALL_MODE' => { 'standard' => 1, 'single' => 1, 'dev' => 1 },
344 'DB_TYPE' => { 'mysql' => 1, 'Pg' => 1 },
345 'INSTALL_ZEBRA' => { 'yes' => 1, 'no' => 1 },
346 'ZEBRA_MARC_FORMAT' => { 'marc21' => 1, 'unimarc' => 1 }, # FIXME should generate from contents of distributation
347 'ZEBRA_LANGUAGE' => { 'en' => 1, 'fr' => 1 }, # FIXME should generate from contents of distribution
350 my %config = get_configuration(\%config_defaults, \%valid_config_values);
351 my %target_directories = get_target_directories(\%config);
352 display_configuration(\%config, \%target_directories);
354 get_file_map($target_map, $dirtree, $file_map, $config{'INSTALL_ZEBRA'} eq "yes" ? 1: 0);
357 'rewrite-config.PL' => [
358 'blib/KOHA_CONF_DIR/koha-conf.xml',
359 'blib/KOHA_CONF_DIR/koha-httpd.conf',
363 if ($config{'INSTALL_ZEBRA'} eq "yes") {
364 push @{ $pl_files->{'rewrite-config.PL'} }, (
365 'blib/ZEBRA_CONF_DIR/etc/passwd',
366 'blib/ZEBRA_CONF_DIR/zebra-biblios.cfg',
367 'blib/ZEBRA_CONF_DIR/zebra-authorities.cfg'
373 #VERSION => strftime('2.9.%Y%m%d%H',gmtime),
374 VERSION_FROM => 'C4/Context.pm',
375 ABSTRACT => 'Award-winning integrated library system (ILS) and Web OPAC',
376 AUTHOR => 'Koha Developers <koha-devel@nongnu.org>',
381 'CGI::Session' => '4.10',
382 'Class::Factory::Util' => 1.7,
383 'Class::Accessor' => 0.30,
384 'DBD::mysql' => 3.0008,
386 'Data::Dumper' => 2.121_08,
388 'Date::Manip' => 5.44,
389 'Digest::MD5' => 2.36,
390 'File::Temp' => 0.16,
391 'GD::Barcode::UPCE' => 1.1,
392 'Getopt::Long' => 2.35,
393 'Getopt::Std' => 1.05,
394 'HTML::Template::Pro' => 0.65,
395 'HTTP::Cookies' => 1.39,
396 'HTTP::Request::Common' => 1.26,
397 'LWP::Simple' => 1.41,
398 'LWP::UserAgent' => 2.033,
399 'Lingua::Stem' => 0.82,
400 'List::Util' => 1.18,
401 'Locale::Language' => 2.07,
402 'MARC::Charset' => 0.98,
403 'MARC::Crosswalk::DublinCore' => 0.03,
404 'MARC::File::XML' => 0.88,
405 'MARC::Record' => 2.00,
406 'MIME::Base64' => 3.07,
407 'MIME::QuotedPrint' => 3.07,
408 'Mail::Sendmail' => 0.79,
409 'PDF::API2' => 2.000,
410 'PDF::API2::Page' => 2.000,
411 'PDF::API2::Util' => 2.000,
412 'PDF::Reuse' => 0.33,
413 'PDF::Reuse::Barcode' => 0.05,
415 'Schedule::At' => 1.06,
416 'Term::ANSIColor' => 1.10,
418 'Test::Harness' => 2.56,
419 'Test::More' => 0.62,
421 'Text::CSV_XS' => 0.32,
422 'Text::Wrap' => 2005.082401,
423 'Time::HiRes' => 1.86,
424 'Time::localtime' => 1.02,
425 'Unicode::Normalize' => 0.32,
426 'XML::Dumper' => 0.81,
427 'XML::LibXML' => 1.59,
428 'XML::SAX::ParserFactory' => 1.01,
429 'XML::Simple' => 2.14,
437 # Man pages generated from POD
438 INSTALLMAN1DIR => File::Spec->catdir($target_directories{'MAN_DIR'}, 'man1'),
439 INSTALLMAN3DIR => File::Spec->catdir($target_directories{'MAN_DIR'}, 'man3'),
442 # # Ask for options with prompt($question,$default) calls here?
443 # return { macro => { 'export TEST' => '755' } }
446 PL_FILES => $pl_files,
448 # 'opac/getfromintranet.PL' => ['$(INST_LIBDIR)/opac/cgi-bin/detail.pl','$(INST_LIBDIR)/opac/cgi-bin/moredetail.pl','$(INST_LIBDIR)/opac/cgi-bin/search.pl','$(INST_LIBDIR)/opac/cgi-bin/subjectsearch.pl','$(INST_LIBDIR)/opac/cgi-bin/logout.pl'],
449 # 'misc/koha.conf.PL' => '$(INST_LIBDIR)/../etc/koha.conf',
450 # 'misc/apache-koha.conf.PL' => '$(INST_LIBDIR)/../etc/apache-koha.conf',
451 # 'misc/koha.sql.PL' => '$(INST_LIBDIR)/intranet/scripts/koha.sql',
452 # 'z3950/z3950-daemon-options.PL' => '$(INST_LIBDIR)/intranet/scripts/z3950daemon/z3950-daemon-options',
453 # # fake target to check permissions
454 # 'misc/chmod.PL' => '$(INST_LIBDIR)/fake-target'
456 # need to set ownerships
457 # need to load koha.sql
458 # need to link koha-httpd.conf
459 # need to start z3950-daemon
466 This function recurses through the directory structure and builds
467 a hash of hashes containing the structure with arrays holding filenames.
468 This directory hashing routine was taken from BrowserUK @ http://www.perlmonks.org/?node_id=219919
474 opendir my $dh, $dir or die $!;
475 my $tree = {}->{$dir} = {};
476 while( my $file = readdir($dh) ) {
477 next if $file =~ m/^\.{1,2}/ and $file !~ /^\.htaccess/; # .htaccess is a special case
478 my $path = $dir .'/' . $file;
479 $tree->{$file} = hashdir($path), next if -d $path;
480 push @{$tree->{'.'}}, $file;
487 This function combines the target_map and file hash to
488 map each source file to its destination relative to
489 the set of installation targets.
491 Output will be a hash mapping from each source file
492 to its destination value, like this:
494 'mainpage.pl' => '$(INTRANET_CGI_DIR)/mainpage.pl'
499 my $target_map = shift;
501 my $file_map = shift;
502 my $install_zebra = shift;
503 my $curr_path = @_ ? shift : ['.'];
505 # Traverse the directory tree.
506 # For each file or directory, identify the
507 # most specific match in the target_map
508 foreach my $dir (sort keys %{ $dirtree }) {
510 # deal with files in directory
511 foreach my $file (sort @{ $dirtree->{$dir} }) {
512 my $targetdir = undef;
513 my $matchlevel = undef;
514 # first, see if there is a match on this specific
515 # file in the target map
516 my $filepath = join("/", @$curr_path, $file);
517 if (exists $target_map->{$filepath}) {
518 $targetdir = $target_map->{$filepath};
519 $matchlevel = scalar(@$curr_path) + 1;
521 # no match on the specific file; look for
523 for (my $i = scalar(@$curr_path) - 1; $i >= 0; $i--) {
524 my $dirpath = join("/", @$curr_path[0..$i]);
525 if (exists $target_map->{$dirpath}) {
526 $targetdir = $target_map->{$dirpath};
527 $matchlevel = $i + 1;
532 if (defined $targetdir) {
533 _add_to_file_map($file_map, $targetdir, $curr_path, $file, $matchlevel, $install_zebra);
535 my $path = join("/", @$curr_path);
536 print "failed to map: $path/$file\n" if $DEBUG;
540 # dealing with subdirectory
541 push @$curr_path, $dir;
542 get_file_map($target_map, $dirtree->{$dir}, $file_map, $install_zebra, $curr_path);
548 sub _add_to_file_map {
549 my $file_map = shift;
550 my $targetdir = shift;
551 my $curr_path = shift;
553 my $matchlevel = shift;
554 my $install_zebra = shift;
555 my $dest_path = @_ ? shift : $curr_path;
557 # The target can be one of the following:
558 # 1. scalar representing target symbol
559 # 2. hash ref containing target and trimdir keys
561 # Consequently, this routine traverses this structure,
562 # calling itself recursively, until it deals with
563 # all of the scalar target symbols.
564 if (ref $targetdir eq 'HASH') {
565 my $subtarget = $targetdir->{target};
566 if (exists $targetdir->{trimdir}) {
567 # if we get here, we've specified that
568 # rather than installing the file to
569 # $(TARGET)/matching/dirs/subdirs/file,
570 # we want to install it to
571 # $(TARGET)/subdirs/file
573 # Note that this the only place where
574 # $matchlevel is used.
575 my @new_dest_path = @$dest_path;
576 if ($targetdir->{trimdir} == -1) {
577 splice @new_dest_path, 0, $matchlevel;
579 splice @new_dest_path, 0, $targetdir->{trimdir};
581 _add_to_file_map($file_map, $subtarget, $curr_path, $file, $matchlevel, $install_zebra, \@new_dest_path);
583 # actually getting here means that the
584 # target was unnecessarily listed
585 # as a hash, but we'll forgive that
586 _add_to_file_map($file_map, $subtarget, $curr_path, $file, $matchlevel, $install_zebra);
588 } elsif ($targetdir ne 'NONE' and $targetdir ne '') {
589 my $source = File::Spec->catfile(@$curr_path, $file);
590 my $destination = File::Spec->catfile('blib', $targetdir, @$dest_path, $file);
591 #print "$source => $destination\n"; # DEBUG
592 # quote spaces in file names
593 # FIXME: this is of questionable portability and
594 # probably depends on user's make recognizing this
595 # quoting syntax -- probably better to remove
596 # spaces and shell metacharacters from all file names
597 $source =~ s/ /\\ /g;
598 $destination =~ s/ /\\ /g;
600 $file_map->{$source} = $destination unless (!$install_zebra and $targetdir =~ /ZEBRA/);
604 =head2 get_configuration_options
606 This prompts the user for various configuration options.
610 sub get_configuration {
611 my $defaults = shift;
612 my $valid_values = shift;
616 By default, Koha can be installed in one of three ways:
618 standard: Install files in conformance with the Filesystem
619 Hierarchy Standard (FHS). This is the default mode
620 and should be used when installing a production
621 Koha system. On Unix systems, root access is
622 needed to complete a standard installation.
624 single: Install files under a single directory. This option
625 is useful for installing Koha without root access, e.g.,
626 on a web host that allows CGI scripts and MySQL databases
627 but requires the user to keep all files under the user's
630 dev: Create a set of symbolic links and configuration files to
631 allow Koha to run directly from the source distribution.
632 This mode is useful for developers who want to run
633 Koha from a git clone.
636 $msg .= _add_valid_values_disp('INSTALL_MODE', $valid_values);
637 $config{'INSTALL_MODE'} = _get_value('INSTALL_MODE', $msg, $defaults->{'INSTALL_MODE'}, $valid_values);
639 # set message and default value for INSTALL_BASE
640 # depending on value of INSTALL_MODE
641 my $install_base_default = $defaults->{'INSTALL_BASE'};
642 if ($config{'INSTALL_MODE'} eq 'dev') {
644 Please specify the directory in which to install Koha's
645 active configuration files and (if applicable) the
646 Zebra database. Koha's CGI scripts and templates will
647 be run from the current directory.
649 Configuration directory:);
650 # FIXME - home directory portability consideration apply
651 $install_base_default = (exists $ENV{'HOME'}) ? "$ENV{'HOME'}/koha-dev" : "/usr/share/koha-dev";
652 } elsif ($config{'INSTALL_MODE'} eq 'single') {
653 $msg = "\nPlease specify the directory in which to install Koha";
654 # FIXME -- we're assuming under a 'single' mode install
655 # that user will likely want to install under the home
656 # directory. This is OK in and of itself, but we should
657 # use File::HomeDir to locate the home directory portably.
658 # This is deferred for now because File::HomeDir is not yet
660 $install_base_default = (exists $ENV{'HOME'}) ? "$ENV{'HOME'}/koha" : "/usr/share/koha";
664 Please specify the directory under which most Koha files
667 Note that if you are planning in installing more than
668 one instance of Koha, you may want to modify the last
669 component of the directory path, which will be used
670 as the package name in the FHS layout.
672 Base installation directory);
674 $config{'INSTALL_BASE'} = _get_value('INSTALL_BASE', $msg, $install_base_default, $valid_values);
675 $config{'INSTALL_BASE'} = File::Spec->rel2abs($config{'INSTALL_BASE'});
677 if ($config{'INSTALL_MODE'} eq "standard") {
679 Since you are using the 'standard' install
680 mode, you should run 'make install' as root.
681 However, it is recommended that a non-root
682 user (on Unix and Linux platforms) have
683 ownership of Koha's files, including the
684 Zebra indexes if applicable.
686 Please specify a user account. This
687 user account does not need to exist
688 right now, but it needs to exist
689 before you run 'make install'. Please
690 note that for security reasons, this
691 user should not be the same as the user
692 account Apache runs under.
695 $config{'KOHA_USER'} = _get_value('KOHA_USER', $msg, $defaults->{'KOHA_USER'}, $valid_values);
698 Please specify the group that should own
699 Koha's files. As above, this group need
700 not exist right now, but should be created
701 before you run 'make install'.
704 $config{'KOHA_GROUP'} = _get_value('KOHA_GROUP', $msg, $defaults->{'KOHA_GROUP'}, $valid_values);
708 Please specify which database engine you will use
709 to store data in Koha. The choices are MySQL and
710 PostgreSQL; please note that at the moment
711 PostgreSQL support is highly experimental.
714 $msg .= _add_valid_values_disp('DB_TYPE', $valid_values);
715 $config{'DB_TYPE'} = _get_value('DB_TYPE', $msg, $defaults->{'DB_TYPE'}, $valid_values);
718 Please specify the name or address of your
719 database server. Note that the database
720 does not have to exist at this point, it
721 can be created after running 'make install'
722 and before you try using Koha for the first time.
725 $config{'DB_HOST'} = _get_value('DB_HOST', $msg, $defaults->{'DB_HOST'}, $valid_values);
728 Please specify the port used to connect to the
730 my $db_port_default = $config{'DB_TYPE'} eq 'mysql' ? '3306' : '5432';
731 $config{'DB_PORT'} = _get_value('DB_PORT', $msg, $db_port_default, $valid_values);
734 Please specify the name of the database to be
736 $config{'DB_NAME'} = _get_value('DB_NAME', $msg, $defaults->{'DB_NAME'}, $valid_values);
739 Please specify the user that owns the database to be
741 $config{'DB_USER'} = _get_value('DB_USER', $msg, $defaults->{'DB_USER'}, $valid_values);
744 Please specify the password of the user that owns the
745 database to be used by Koha);
746 $config{'DB_PASS'} = _get_value('DB_PASS', $msg, $defaults->{'DB_PASS'}, $valid_values);
749 Koha can use the Zebra search engine for high-performance
750 searching of bibliographic and authority records. If you
751 have installed the Zebra software and would like to use it,
752 please answer 'yes' to the following question. Otherwise,
753 Koha will default to using its internal search engine.
755 Please note that if you choose *NOT* to install Zebra,
756 koha-conf.xml will still contain some references to Zebra
757 settings. Those references will be ignored by Koha.
759 Install the Zebra configuration files?);
760 $msg .= _add_valid_values_disp('INSTALL_ZEBRA', $valid_values);
761 $config{'INSTALL_ZEBRA'} = _get_value('INSTALL_ZEBRA', $msg, $defaults->{'INSTALL_ZEBRA'}, $valid_values);
763 if ($config{'INSTALL_ZEBRA'} eq 'yes') {
765 Since you've chosen to use Zebra with Koha,
766 you must specify the primary MARC format of the
767 records to be indexed by Zebra.
769 Koha provides Zebra configuration files for MARC 21
772 MARC format for Zebra indexing);
773 $msg .= _add_valid_values_disp('ZEBRA_MARC_FORMAT', $valid_values);
774 $config{'ZEBRA_MARC_FORMAT'} = _get_value('ZEBRA_MARC_FORMAT', $msg, $defaults->{'ZEBRA_MARC_FORMAT'}, $valid_values);
776 Koha supplies Zebra configuration files tuned for
777 searching either English (en) or French (fr) MARC
780 Primary language for Zebra indexing);
781 $msg .= _add_valid_values_disp('ZEBRA_LANGUAGE', $valid_values);
782 $config{'ZEBRA_LANGUAGE'} = _get_value('ZEBRA_LANGUAGE', $msg, $defaults->{'ZEBRA_LANGUAGE'}, $valid_values);
785 Please specify Zebra database user);
786 $config{'ZEBRA_USER'} = _get_value('ZEBRA_USER', $msg, $defaults->{'ZEBRA_USER'}, $valid_values);
789 Please specify the Zebra database password);
790 $config{'ZEBRA_PASS'} = _get_value('ZEBRA_PASS', $msg, $defaults->{'ZEBRA_PASS'}, $valid_values);
796 sub _add_valid_values_disp {
798 my $valid_values = shift;
801 if (exists $valid_values->{$key}) {
802 $disp = " (" . join(", ", sort keys %{ $valid_values->{$key} }) . ")";
811 my $valid_values = shift;
813 my $val = prompt($msg, $default);
814 while (exists $valid_values->{$key} and not exists $valid_values->{$key}->{$val}) {
815 my $retry_msg = "Value '$val' is not a valid option.\n";
816 $retry_msg .= "Please enter a value";
817 $retry_msg .= _add_valid_values_disp($key, $valid_values);
818 $val = prompt($retry_msg, $default);
823 =head2 get_target_directories
825 Creates a hash mapping from symbols for installation target
826 directories to actual directory paths.
830 sub get_target_directories {
833 my $base = $config->{'INSTALL_BASE'};
834 my $mode = $config->{'INSTALL_MODE'};
836 # get last component of install base directory
837 # to treat as package name
838 my ($volume, $directories, $file) = File::Spec->splitpath($base, 1);
839 my @basedir = File::Spec->splitdir($directories);
840 my $package = pop @basedir;
843 if ($mode eq 'single') {
844 $dirmap{'INTRANET_CGI_DIR'} = File::Spec->catdir(@basedir, $package, 'intranet', 'cgi-bin');
845 $dirmap{'INTRANET_TMPL_DIR'} = File::Spec->catdir(@basedir, $package, 'intranet', 'htdocs', 'intranet-tmpl');
846 $dirmap{'INTRANET_WWW_DIR'} = File::Spec->catdir(@basedir, $package, 'intranet', 'htdocs');
847 $dirmap{'OPAC_CGI_DIR'} = File::Spec->catdir(@basedir, $package, 'opac', 'cgi-bin');
848 $dirmap{'OPAC_TMPL_DIR'} = File::Spec->catdir(@basedir, $package, 'opac', 'htdocs', 'opac-tmpl');
849 $dirmap{'OPAC_WWW_DIR'} = File::Spec->catdir(@basedir, $package, 'opac', 'htdocs');
850 $dirmap{'PERL_MODULE_DIR'} = File::Spec->catdir(@basedir, $package, 'lib');
851 $dirmap{'KOHA_CONF_DIR'} = File::Spec->catdir(@basedir, $package, 'etc');
852 $dirmap{'ZEBRA_CONF_DIR'} = File::Spec->catdir(@basedir, $package, 'etc', 'zebradb');
853 $dirmap{'EXAMPLE_DIR'} = File::Spec->catdir(@basedir, $package, 'example');
854 $dirmap{'SCRIPT_DIR'} = File::Spec->catdir(@basedir, $package, 'bin');
855 $dirmap{'MAN_DIR'} = File::Spec->catdir(@basedir, $package, 'man');
856 $dirmap{'DOC_DIR'} = File::Spec->catdir(@basedir, $package, 'doc');
857 $dirmap{'ZEBRA_LOCK_DIR'} = File::Spec->catdir(@basedir, $package, 'var', 'lock', 'zebradb');
858 $dirmap{'LOG_DIR'} = File::Spec->catdir(@basedir, $package, 'var', 'log');
859 $dirmap{'ZEBRA_DATA_DIR'} = File::Spec->catdir(@basedir, $package, 'var', 'lib', 'zebradb');
860 $dirmap{'ZEBRA_RUN_DIR'} = File::Spec->catdir(@basedir, $package, 'var', 'run', 'zebradb');
861 } elsif ($mode eq 'dev') {
862 my $curdir = File::Spec->rel2abs(File::Spec->curdir());
863 $dirmap{'INTRANET_CGI_DIR'} = File::Spec->catdir($curdir);
864 $dirmap{'INTRANET_TMPL_DIR'} = File::Spec->catdir($curdir, 'koha-tmpl', 'intranet-tmpl');
865 $dirmap{'INTRANET_WWW_DIR'} = File::Spec->catdir($curdir, 'koha-tmpl', 'intranet-tmpl');
866 $dirmap{'OPAC_CGI_DIR'} = File::Spec->catdir($curdir, 'opac');
867 $dirmap{'OPAC_TMPL_DIR'} = File::Spec->catdir($curdir, 'koha-tmpl', 'opac-tmpl');
868 $dirmap{'OPAC_WWW_DIR'} = File::Spec->catdir($curdir, 'koha-tmpl', 'opac-tmpl');
869 $dirmap{'PERL_MODULE_DIR'} = File::Spec->catdir($curdir);
870 $dirmap{'KOHA_CONF_DIR'} = File::Spec->catdir(@basedir, $package, 'etc');
871 $dirmap{'ZEBRA_CONF_DIR'} = File::Spec->catdir(@basedir, $package, 'etc', 'zebradb');
872 $dirmap{'EXAMPLE_DIR'} = File::Spec->catdir(@basedir, $package, 'example');
873 $dirmap{'SCRIPT_DIR'} = File::Spec->catdir(@basedir, $package, 'bin');
874 $dirmap{'MAN_DIR'} = File::Spec->catdir(@basedir, $package, 'man');
875 $dirmap{'DOC_DIR'} = File::Spec->catdir(@basedir, $package, 'doc');
876 $dirmap{'ZEBRA_LOCK_DIR'} = File::Spec->catdir(@basedir, $package, 'var', 'lock', 'zebradb');
877 $dirmap{'LOG_DIR'} = File::Spec->catdir(@basedir, $package, 'var', 'log');
878 $dirmap{'ZEBRA_DATA_DIR'} = File::Spec->catdir(@basedir, $package, 'var', 'lib', 'zebradb');
879 $dirmap{'ZEBRA_RUN_DIR'} = File::Spec->catdir(@basedir, $package, 'var', 'run', 'zebradb');
881 # mode is standard, i.e., 'fhs'
882 $dirmap{'INTRANET_CGI_DIR'} = File::Spec->catdir(@basedir, $package, 'intranet', 'cgi-bin');
883 $dirmap{'INTRANET_TMPL_DIR'} = File::Spec->catdir(@basedir, $package, 'intranet', 'htdocs', 'intranet-tmpl');
884 $dirmap{'INTRANET_WWW_DIR'} = File::Spec->catdir(@basedir, $package, 'intranet', 'htdocs');
885 $dirmap{'OPAC_CGI_DIR'} = File::Spec->catdir(@basedir, $package, 'opac', 'cgi-bin');
886 $dirmap{'OPAC_TMPL_DIR'} = File::Spec->catdir(@basedir, $package, 'opac', 'htdocs', 'opac-tmpl');
887 $dirmap{'OPAC_WWW_DIR'} = File::Spec->catdir(@basedir, $package, 'opac', 'htdocs');
888 $dirmap{'PERL_MODULE_DIR'} = File::Spec->catdir(@basedir, $package, 'lib');
889 $dirmap{'KOHA_CONF_DIR'} = File::Spec->catdir(File::Spec->rootdir(), 'etc', $package);
890 $dirmap{'ZEBRA_CONF_DIR'} = File::Spec->catdir(File::Spec->rootdir(), 'etc', $package, 'zebradb');
891 $dirmap{'EXAMPLE_DIR'} = File::Spec->catdir(@basedir, $package, 'example');
892 $dirmap{'SCRIPT_DIR'} = File::Spec->catdir(@basedir, $package, 'bin');
893 $dirmap{'MAN_DIR'} = File::Spec->catdir(@basedir, $package, 'man');
894 $dirmap{'DOC_DIR'} = File::Spec->catdir(@basedir, $package, 'doc');
895 $dirmap{'ZEBRA_LOCK_DIR'} = File::Spec->catdir(File::Spec->rootdir(), 'var', 'lock', $package, 'zebradb');
896 $dirmap{'LOG_DIR'} = File::Spec->catdir(File::Spec->rootdir(), 'var', 'log', $package);
897 $dirmap{'ZEBRA_DATA_DIR'} = File::Spec->catdir(File::Spec->rootdir(), 'var', 'lib', $package, 'zebradb');
898 $dirmap{'ZEBRA_RUN_DIR'} = File::Spec->catdir(File::Spec->rootdir(), 'var', 'run', $package, 'zebradb');
901 _get_argv_overrides(\%dirmap);
906 sub _get_argv_overrides {
910 for (my $i = 0; $i <= $#ARGV; $i++) {
911 if ($ARGV[$i] =~ /^([^=]+)=([^=]+)$/ and exists $dirmap->{$1}) {
914 push @new_argv, $ARGV[$i];
920 sub display_configuration {
923 print "\n\nKoha will be installed with the following configuration parameters:\n\n";
924 foreach my $key (sort keys %$config) {
925 print sprintf("%-25.25s%s\n", $key, $config->{$key});
928 print "\nand in the following directories:\n\n";
929 foreach my $key (sort keys %$dirmap) {
930 print sprintf("%-25.25s%s\n", $key, $dirmap->{$key});
932 print "\n\nTo change any configuration setting, please run\n";
933 print "perl Makefile.PL again. To override one of the target\n";
934 print "directories, you can do so on the command line like this:\n";
935 print "\nperl Makefile.PL PERL_MODULE_DIR=/usr/share/perl/5.8\n\n";
942 my $test = $self->SUPER::test(@_);
943 $test =~ s!\$\(INST_LIB\)!blib/PERL_MODULE_DIR!g;
950 # NOTE: we're *not* doing this: my $install = $self->SUPER::install(@_);
951 # This means that we're completely overriding EU::MM's default
952 # installation and uninstallation targets.
953 foreach my $key (sort keys %target_directories) {
955 KOHA_INST_$key = blib/$key
956 KOHA_DEST_$key = $target_directories{$key}
957 ) unless $config{'INSTALL_ZEBRA'} ne "yes" and $key =~ /ZEBRA/;
961 install :: all install_koha set_koha_ownership
962 \t\$(NOECHO) \$(NOOP)
964 $install .= "install_koha ::\n";
965 $install .= "\t\$(NOECHO) umask 022; \$(MOD_INSTALL) \\\n";
966 foreach my $key (sort keys %target_directories) {
967 $install .= "\t\t\$(KOHA_INST_$key) \$(KOHA_DEST_$key) \\\n" unless $config{'INSTALL_ZEBRA'} ne "yes" and $key =~ /ZEBRA/;
969 $install .= "\t\t\$(INST_MAN1DIR) \$(DESTINSTALLMAN1DIR) \\\n";
970 $install .= "\t\t\$(INST_MAN3DIR) \$(DESTINSTALLMAN3DIR)\n";
973 $install .= "set_koha_ownership ::\n";
974 if ($config{'INSTALL_MODE'} eq 'standard' and $config{'KOHA_USER'} ne "root") {
975 foreach my $key (sort keys %target_directories) {
976 $install .= "\t\$(NOECHO); chown -R $config{'KOHA_USER'}:$config{'KOHA_GROUP'} \$(KOHA_DEST_$key) \\\n";
978 $install .= "\t\$(NOECHO) \$(NOOP)\n\n";
980 $install .= "\t\t\$(NOECHO) \$(NOOP)\n\n";
987 # put directory mappings into Makefile
988 # so that Make will export as environment
989 # variables -- this is for the use of
991 my $env = join("\n", map { "export __${_}__ = $target_directories{$_}" } keys %target_directories);
993 $env .= join("\n", map { "export __${_}__ = $config{$_}" } keys %config);
1002 ExtUtils::MakeMaker(3)
1006 MJ Ray mjr at phonecoop.coop
1009 FIXME: deal with .htaccess