It looks like I made a copy/paste error in a previous patch.
While the fix was working when you pass the param "module" to
version_info, it wasn't populating the version correctly
for the "all" param, which causes koha_perl_deps.pl to
think all OK modules actually need an upgrade.
TEST PLAN
0) Be on a system where you know your Koha Perl dependencies are
mostly up-to-date
1) Run ./koha_perl_deps.pl -a -c
2) Note that most modules say they need an upgrade even when
the installed version is the same as the minimum version
3) Apply patch
4) Run ./koha_perl_deps.pl -a -c
5) Note that most moduls say they're OK, especially when the
installed version is the same or greater than the minimum version
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Running koha_perl_deps.pl -u convinced me.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
On previous bugs
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
The GetMemberIssuesAndFines subroutine used to retrieve the issues,
overdues and fines for a given patron. Most of the time, only 1 or 2 of
these values were used.
This patch removes this subroutine and uses the new get_issues,
get_overdues and get_balance method from Koha::Patron and Koha::Account::Lines.
Test plan:
1/ Add overdues, issues and fines to different patrons
2/ On the checkout, checkin and patron search result and the patron
detail pages, these 3 informations, if displayed before this patch, must be
correctly displayed.
3/ Use the batch patron deletion tool and make sure that patrons with a
balance > 0 are not deleted
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This subroutine is no longer in used and can be removed.
Test plan:
git grep GetBorrowersWhoHaveNeverBorrowed
must not return any results
NOTE: grep -i getborrowerswhohave `find . -type f`
works well enough to find the cleanborrowers.pl too.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch makes the following changes, as requested by QA:
[1] UploadedFile->delete always calls SUPER::delete.
The return value normally comes from SUPER::delete; if removing the
file failed, we return false. Two warns are kept.
Since delete does no longer return the filename, a few changes were
needed in tools/upload.pl.
[2] Method getCategories is moved to UploadedFiles. Script tools/upload.pl
now only contains one call. Added a use C4::Koha.
[3] Calls UploadedFiles->delete as class method. As a result I removed
method delete_errors for now; may be reconsidered on a new report.
[4] Adjusted three ->search calls for id and public to ->find calls.
[5] If you pass no id to upload.pl when deleting, you don't get an alert.
All by all, we got rid of 15 lines !
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch adds some documentation lines.
And mainly rearrangs the tests in Upload.t. The 'basic CRUD testing' is
not needed separately any more. A new test catches the "file missing"
warn.
Test plan:
[1] Run perldoc on UploadedFile[s].pm
[2] Run t/db_dependent/Upload.t
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Why? Koha::Uploader now only contains the actual CGI upload. The new name
better reflects its handler status.
Pragmatically, the difference between Uploaded and Uploader makes it
easier to specifically search for them in the codebase.
Test plan:
[1] Run t/db_dependent/Upload.t.
[2] Add an upload via the interface.
[3] Check the code:
git grep "Koha::Upload;"
git grep "Koha::Upload\->"
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Class method getCategories has no strict binding to Upload.pm. While
Upload.pm is now restricted to the actual uploading process with CGI
hook, this routine fits better in the UploadedFile package.
Class method httpheaders can be moved as well for the same reason. Note
that it actually is an instance method. The parameter $name is dropped.
Test plan:
[1] Run t/db_dependent/Upload.t.
[2] Check the categories in the combo box of tools/upload.
[3] Check a download via tools/upload and opac-retrieve-file.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
The get routine actually returns records from uploaded_files. It should be
possible to replace its calls by direct calls of Koha::UploadedFiles.
This patch is the crux of this patch set. It deals with all scripts that
use Koha::Upload.
In the process we do:
[1] Add a file_handle method to Koha::UploadedFile. This was previously
arranged via the fh parameter of get.
[2] Add a full_path method to UploadedFile. Previously returned in the
path hash key of get. (Name is replaced by filename.)
[3] Add a search_term method too (implementing get({ term => .. }).
This logic came from _lookup.
[4] Add a keep_file parameter to delete method. Only used in test now.
Test plan:
[1] Run t/db_dependent/Upload.t
[2] Go to Tools/Upload. Add an upload, download and delete.
[3] Add another public upload , search for it.
Use the hashvalue to download via opac with URL:
cgi-bin/koha/opac-retrieve-file.pl?id=[hashvalue]
[4] Go to Tools/Stage MARC for import. Import a marc file.
[5] Go to Tools/Upload local cover image. Import an image file.
Enable OPACLocalCoverImages to see result.
[6] Test uploading a offline circulation file:
Enable AllowOfflineCirculation, and create a koc file (plain text):
Line1: Version=1.0\tA=1\tB=2
Line2: 2016-11-23 16:00:00 345\treturn\t[barcode]
Note: Replace tabs and barcode. The number of tabs is essential!
Checkout the item with your barcode.
Go to Circulation/Offline circulation file upload.
Upload and click Apply directly.
Checkout again. Repeat Offline circulation file upload.
Now click Add to offline circulation queue.
[7] Connect the upload plugin to field 856$u.
Enable HTML5MediaEnabled.
Upload a webm file via the plugin. Click Choose to save the URL,
and put 'video/webm' into 856$q. Save the biblio record.
Check if you see the media tab with player on staff detail.
(See also: Bug 17673 about empty OPACBaseURL.)
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Since delete is not part of the upload process, we will move it now
to Koha::UploadedFile[s].
Deleting the file will be done in UploadedFile.
The (multiple) delete method in UploadedFiles refers to the single delete.
Test plan:
[1] Run t/db_dependent/Upload.t
The warning ("but file was missing") in the last subtest is fine;
the file did not exist. Will be addressed in a follow-up.
[2] Search for uploads on Tools/Upload. Clone this tab (repeat search on
a new tab in your browser).
[3] Delete an existing upload on the first tab.
[4] Try to delete it again on the second tab. Error message?
[5] Bonus points:
Add an upload. Mark the file immutable with chattr +i. Try to delete
the file. You should see a "Could not be deleted"-message.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Note: This is the last occurrence where we use DBI to perform a CRUD
operation. In this case a delete from uploaded_files.
We now call Koha::UploadedFile[s]->delete to only delete the record
from the table. A next step will be moving the additional functionality
of removing the file(s) too.
Test plan:
[1] Run t/db_dependent/Upload.t
[2] Delete an upload from tools/upload.pl
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
The _lookup routine performs a few select statements on uploaded_files.
In this patch the SQL statements are replaced with Koha::Object calls.
One call of _lookup is replaced directly by Koha::UploadedFiles.
Note: _lookup can be removed in a later stage.
Test plan:
[1] Run t/db_dependent/Upload.t
[2] Upload a file in some upload category
[3] Try to upload the same file into the same category. Error?
[4] Try to upload the same file in another category. Should work.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
The _register routine basically inserts a new record in uploaded_files.
It should use Koha::UploadedFile now.
Test plan:
[1] Run t/db_dependent/Upload.t
[2] Upload a file via Tools/Upload.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
In the next set of patches we will start using these new classes in
Koha::Upload, and scripts using it.
This is just the starting point of that migration.
Test plan:
[1] Run t/db_dependent/Upload.t
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
In the meantime api was enabled in plack.psgi and needs a little tweak
too for a dev install.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch makes the following changes:
koha-foreach, koha-upgrade-schema (shell scripts):
[1] Read default file
[2] Include helper functions
[3] Add call to adjust_paths_dev_install
[4] Replace hardcoded path by $PERL5LIB
koha-shell (perl script):
[1] Remove hardcoded lib path
[2] Add a sub that reads PERL5LIB from default or koha-conf, just as the
shell scripts do.
koha-plack (shell script), plack.psgi:
[1] Add call to adjust_paths_dev_install
[2] Remove hardcoded lib path
[3] Add installer path to PERL5LIB, remove it from plack.pgsi
koha-sitemap (shell script):
[1] Add call to adjust_paths_dev_install
[2] Remove hardcoded lib path
[3] Add installer path to PERL5LIB
[4] Adjust path for call to sitemap cron job
koha-start-sip (shell script):
[1] Read default file
[2] Include helper functions
[3] Add call to adjust_paths_dev_install
[4] Adjust path to C4/SIP
koha-stop-sip (shell script):
[1] Remove KOHA_CONF and PERL5LIB (not needed to stop the daemon)
[2] Same for paths in daemon client options
NOTE: Script debian/scripts/koha-upgrade-to-3.4 has been left out
intentionally.
Test plan:
[1] Regular install:
Run koha-foreach echo Hi
Run koha-upgrade-schema yourinstance
Run koha-shell yourinstance
If you have plack, run koha-plack --start|--stop yourinstance
Run koha-sitemap --generate yourinstance
Run koha-start-sip yourinstance
Run koha-stop-sip yourinstance
[2] Dev install [yourinstance] with <dev_install> in koha-conf.xml:
Run koha-upgrade-schema yourinstance
Run koha-shell yourinstance
If you have plack: koha-plack --start|--stop yourinstance
Run koha-sitemap --generate yourinstance
Run koha-start-sip yourinstance
Run koha-stop-sip yourinstance
[3] Git grep on koha/lib
You should no longer see occurrences in debian/scripts except:
koha-translate: see report 16749
koha-upgrade-to-3.4: left out intentionally
[4] Git grep on koha/bin
You should only see hits for lines with koha-functions in the
debian scripts except:
koha-upgrade-to-3.4: left out intentionally
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Most scripts tested on Wheezy (although it would not matter much).
Plack script tested on Jessie.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
[1] Add a call to the new adjust_paths_dev_install
[2] Differentiate location of rebuild_zebra.pl
[3] Replace a hardcoded path by $PERL5LIB
Test plan:
Adjust a biblio record in package or dev install.
Run koha-rebuild-zebra -b -z for same instance.
Verify that the change has been indexed.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
[1] Add a call to the new adjust_paths_dev_install
[2] Differentiate location of rebuild_zebra.pl
NOTE: The scripts assume koha-functions.sh to be in /usr/share/koha/bin.
Finding a better location for this shell library may be hard.
Test plan:
Run koha-indexer for a regular package install or a dev install.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This new function checks koha-conf.xml for a given instance and if it
contains a dev_install line, it adjusts PERL5LIB and KOHA_HOME
accordingly. Otherwise it does not touch the values of these
variables as normally read from /etc/default/koha-common.
The function will be used in various debian scripts to allow for more
flexibility with dev installs. And at the same time aiming to make better
use of PERL5LIB and KOHA_HOME.
Test plan:
[1] Add <dev_install>/not/there</dev_install> to your koha-conf.xml.
[2] Run on the command line:
PERL5LIB=test
source [path-to-your-instance]/debian/scripts/koha-functions.sh
echo $PERL5LIB
adjust_paths_dev_install [name-of-your-instance]
echo $PERL5LIB
The last echo should be: /not/there
[3] Remove the <dev_install> line and repeat step 2.
The last echo should be: test
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
We need to tell the administrators that it would be great for them to
set this config entry.
Test plan:
- Do not set template_cache_dir and confirm that you see the warning
- Set template_cache_dir and confirm that you do not see the warning
Signed-off-by: Magnus Enger <magnus@libriotech.no>
Both templates for koha-conf.xml are updated. After applying the
patach a warning was correctly displayed. After adding
template_cache_dir to koha-conf.xml and restarting memcached it
went away.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
And comment it, as we don't know what are the sysop's preferences
Signed-off-by: Magnus Enger <magnus@libriotech.no>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Test plan:
1) Apply patch
2) Display Z39.50 search dialogs:
- cataloguing / new from Z39.50
- authorities / new from Z39.50
- acquisition / new from an external source
3) Select all / Clear all should be placed below "Search targets" header
4) [Optionally] Set some style in IntranetUserCSS for class z3950checks
https://bugs.koha-community.org/show_bug.cgi?id=17487
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Test plan:
1) Apply patch
2) Display Z39.50 search dialogs:
- cataloguing / new from Z39.50
- authorities / new from Z39.50
- acquisition / new from an external source
3) Select all / Clear all should be placed below "Search targets" header
https://bugs.koha-community.org/show_bug.cgi?id=17487
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 12775 added a link "Show only mine" in newordersuggestion.pl.
This does not work, no results.
Also corrects the fact that click must not do default action by adding e.preventDefault().
Test plan :
- You must have suggestions you have accepted
- Create a new order from suggestion : /cgi-bin/koha/acqui/newordersuggestion.pl
- Click on Show only mine
=> Without patch the table is empty showing "No matching records found"
=> With patch you see only suggestions you have accpeted
Signed-off-by: Zoe Schoeler <crazy.mental.onion@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
The directory it attempts to create an xml file may not be writable for
the user running the test. By changing the directory from the current
directory to a temporary one, the test runs. After all 'chmod 777
t/db_dependent' is a bad idea.
TEST PLAN
---------
1) sudo koha-shell "prove t/db_dependent/Sitemapper.t" kohadev
-- fails
2) apply patch
3) sudo koha-shell "prove t/db_dependent/Sitemapper.t" kohadev
-- succeeds
4) run koha qa test tools
Tested without qa tools
Signed-off-by: Claire Gravely <claire_gravely@hotmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch makes the atomic update use the new functions introduced by
bug 17234 for checking the structure before attempting to call ALTER
TABLE.
It checks for the column existence, and also if it is a primary key.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch adds 'borrower_attributes' a field (if) which
will act as a primary key.
This is needed for DBIC to be used to handle rows, and also will help
when faced with the implementation of the REST api for this resource.
To test:
- Run all patron modification / attributes and verify nothing breaks
- Sign off :-D
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
The original behavior is broken, see https://stackoverflow.com/questions/21410484/jquery-selector-to-find-out-count-of-non-empty-inputs
Test plan:
Edit a circ rule
=> Without this patch you get a useless message
=> With this patch, no message
Edit a circ rule with content in inputs
=> With or without this patch you get a useful message
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
We need to add $9 to the skip_subfields hash too. Formerly, it was
added to $exclude as well.
Thanks, Julian, for catching this one.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Adding another delete for field 100.
Will mock GetMarcBiblio on a new report.
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Kept the same number of lines.
You could verify with diff -w.
Test plan:
[1] Run t/db_dependent/Authorities/Merge.t
[2] As the last patch in this series, also test the interface:
Set AuthorityMergeMode to loose. Set dontmerge to Do.
Modify an authority record attached to multiple biblios.
Edit a subfield, clear a subfield and add a subfield.
Save. Wait a bit for the merge and Zebra update.
Verify that the changes are merged properly into biblio records.
[3] Repeat step 2 with AuthorityMergeMode to strict.
Remember that this affects the extra subfields in biblio records.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Remove some commented warnings
Remove the commented old code at the end of sub merge
Explicitly set merge mode in the first subtest
Move the return to loose mode from the second subtest to the third
Test plan:
Run t/db_dependent/Authorities/Merge.t
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Since strict mode does not allow additional subfields that would make
identical fields linked to the same authority different, there is no
need to keep them while merging.
We achieve this goal by simply:
[1] Count the number of same fields linked to mergefrom in strict mode to
eliminate duplicates.
[2] Replaces the if-statement on auth_number by a next. (Tidy follows.)
Test plan:
Run t/db_dependent/Authorities/Merge.t
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
If you modify an authority and clear a specific subfield, you expect that
merge respects your edit and clears this subfield too in the biblio
records. It does in the new strict mode, but it does not yet in the
default loose mode.
This patch fixes that by adjusting the code around $exclude so that it
uses a new hash skip_subfields, built from the reporting tags from the old
and the new authority record.
This is supported again by some changes in the unit test.
Test plan:
Run t/db_dependent/Authorities/Merge.t
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Originally aimed for 9988, adjusted for this report.
Old behavior was: pick the first tag. This is definitely wrong.
If you (would) merge 610 to 611, you don't want to get a 111.
This patch resolves the problem by determining the new tag in a small
helper routine _merge_newtag, and corrects the position of the new field
in the MARC record with append_fields_ordered. Too bad that MARC::Record
does not have such a function; it looks like insert_fields_ordered, but
it is different in case of multiple fields with the same tag.
Note: These two small helper functions are not tested separately, since they
should not be called outside of merge. They are implicitly tested by the
adjusted tests in Merge.t.
Note: In adding tests for this fix, I chose to simplify compare_field_count
(no need for the pass parameter), and replace the pass parameter of sub
compare_field_order by an exclude parameter, a hash of fields to exclude in
counting fields.
Test plan:
Run t/db_dependent/Authorities/Merge.t
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Original fix from a patch on bug 11315.
Amended by Marcel de Rooy January 2017.
Test plan:
Run t/db_dependent/Authorities/Merge.t in both loose and strict mode.
Should no longer make a difference.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Original fix from a patch on bug 11315.
Amended by Marcel de Rooy January 2017.
Test plan:
If you set mode to loose, the test will still pass.
If you set mode to strict, one test will fail. (Fixed later.)
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Original fix from a patch on bug 5572.
Amended by Marcel de Rooy January 2017.
Note: This does not yet resolve the field order when merging to another
auth type, but is a good start.
Test plan:
Run t/db_dependent/Authorities/Merge.t
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Original patch from bug 5572, dating back to 2011!
Amended by Marcel de Rooy January 2017. Renamed the pref.
The fix on this report is based on this preference.
Depending on the pref, subfields will be deleted or kept.
Test plan:
Run the dbrev.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
UNIMARC inserts field 100. This interferes the field count and order
in the test.
Note: This is a quick fix. Will polish it after bug 17913.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
EDIT:
Adjusted three small typos that did not disturb the test in its current
form, but do when we are fixing bugs on bug 17913.
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
No spectacular things:
[1] Move the framework modifications to a sub. Use same style to create auth types and linked fields.
[2] Change some new Object occurrences to Object->new.
[3] Add tests for field count and field order in the first two subsets.
[4] Few whitespace changes (sorry) and comment lines.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Originally aimed for bug 9988. Adjusted in line with other subtests.
Will polish the three subtests a little more on a follow-up.
Test plan:
Run t/db_dependent/Authorities/Merge.t
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Based on original patch from Maxime Beaulieu on bug 11315.
Amended by Marcel de Rooy on report 17909.
EDIT:
Original tests have been adjusted in view of:
[1] Test on bug 11315 heavily leaned on DBD::Mock. Since we are
using Test::DBIx::Class on such tests now, this would need attention.
Moreover, the advantage of mocking the database in this case is at
least arguable.
[2] Matching the first (somewhat older) subtest of 11700.
[3] Simplification and readability.
Look e.g. at the use of $MARCto and $MARCfrom on 11315.
This made me merge them in the db_dependent counterpart.
Also note that this subtest adds another needed test case: the merge from
auth1 to modified auth1, while 11700 tested auth1 to auth2.
Test plan:
Just run t/db_dependent/Authorities/Merge.t
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Original patch from Julian Maurice on bug 11700.
With sign offs by:
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Amended by Marcel de Rooy on report 17909.
EDIT (January 2017):
Removed some tests not related to merge.
Put remaining tests in a subtest, made them working on current merge.
Slightly revised the mocking.
Note: I plan to move the zebra retrieval stuff outside merge in one of
the next stages, and replace it by calling Koha::SearchEngine. This will
reduce mocking complexity here.
Test plan:
Just run t/db_dependent/Authorities/Merge.t
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
