This patch changes the OPAC list download process so that the download
link triggers a modal dialog instead of a pop-up window. This
streamlines the process a little bit and makes it work better on mobile
devices.
The download list page has been altered so that it works better as a
standalone page, as it might be seen if JavaScript is disabled. Simple
form validation has been added to help prevent submission of the form
without choosing a format.
To test the virtualshelves system preference must be enabled.
- View an existing list in the OPAC and click the "download list" link.
- A modal dialog should be displayed with the download form.
- Submitting the form without selecting a format should trigger either a
browser-based form validation error (in HTML5-supporting browsers) or
a JavaScript alert (if your browser doesn't support the "required"
attribute.
- Choosing a download format and submitting the form should close
the dialog and trigger the correct download.
- Clicking the "Cancel" link should close the dialog.
Test with JavaScript disabled:
- Clicking the "download list" link should take you to a page which
contains the same form which appeared in the modal dialog.
- Submitting the form without selecting a format should trigger either a
browser-based form validation error (in HTML5-supporting browsers) or
a JavaScript alert (if your browser doesn't support the "required"
attribute..
- Choosing a download format and submitting the form should result in
the corect download.
- Clicking the "Cancel" link should return you to the correct list.
Signed-off-by: Aleisha <aleishaamohia@hotmail.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes QA script and tests, works as described.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Since we switched to Template Toolkit we don't need to stick with the
sufix we used for HTML::Template::Pro.
This patch changes the occurences of '.tmpl' in favour of '.tt'.
To test:
- Apply the patch
- Install koha, and verify that every page can be accesed
Regards
To+
P.S. a followup will remove the glue code.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch modifies staff printslip.tt to take into account
caller. Also fixes similar problem on opac printslip.tt
To test:
staff
1. Print hold transfer slip
2. Print transfer slip
3. Print member slip
opac
4. Print self checkout slip
5. Update translation files, check new strings are present
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch removes the use of smartmatch operators in the search code.
Regards
To+
Edit: this revision uses 'grep' instead of Lists::MoreUtils::any
Sponsored-by: Universidad Nacional de Cordoba
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script.
Tested search, no problems found.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Use C4::Languages::getlanguage() instead of
C4::Templates::_current_language()
Test plan:
1/ Set one of the 4 XSLT sysprefs to 'default'
2/ Go to the corresponding page
3/ Switch language and check that the right XSLT is used
4/ Set the same syspref to something with '{langcode}' in it. For
example:
"../koha-tmpl/opac-tmpl/bootstrap/{langcode}/xslt/UNIMARCslim2OPACDetail.xsl"
5/ Go back to the corresponding page
6/ Switch language and check that the right XSLT is used
7/ Change a compact.xsl for a language (for example
koha-tmpl/intranet-tmpl/prog/fr-FR/xslt/compact.xsl) to be able to see
differences
8/ Go to a biblio detail page in staff interface and click on "MARC
Preview: Show"
9/ Close the popup, switch language and click again on the same link
10/ Check that the correct XSLT is used.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Works as described following test plan.
No koha-qa errors
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
No problems found, passes tests and QA script.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This makes Koha::Cache behave better by default. It will use memcached
if available to do shared caching, if that's not available it will fall
back to in-memory caching. It also allows for a singleton accessor to
allow a single cache to be shared within a process.
* Added tests to confirm UTF8-cleanness.
* Added minor fixups to stop warnings.
Test plan:
* The t/Cache.t file runs successfully with and without the
MEMCACHED_SERVERS envvar set (and memcached running in the
environment.)
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch ensures that only orders that have been placed (i.e.,
orders whose basket is closed) are counted in the OPACAcquisitionsDetails
display.
To test:
[1] Turn on OPACAcquisitionsDetails and set AcqCreateItem to 'ordering'.
[2] Create an order for a record, but do not close the basket.
[3] View the record in the OPAC. It should not display any order count.
[4] Close the bakset.
[5] View the record in the OPAC again. This time, it should display
the count of items on order.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch adds a new system preference 'OPACAcquisitionDetail'.
If it is enabled, information about items on order will be displayed on
the OPAC detail page.
Test plan:
- switch on the OPACAcquisitionDetails pref.
- set the AcqCreateItems pref to 'receiving'.
- create some orders on 1 or more items.
- go to the opac detail page and verify the "Holdings" tab contains the
line "X item are on order." (at the bottom of the table containing the
item list).
- receive the items.
- verify the number of items has decreased.
- set the AcqCreateItems pref to 'ordering'.
- create some orders on 1 or more items.
- go to the opac detail page and verify the item list contains the items
with the "on order" status.
- receive the items.
- verify the received items no longer have the the "on order" status.
To test completely this feature, you should verify there is no
regression on the pref OpacMaxItemsToDisplay, OpacSeparateHoldings and
OpacSeparateHoldingsBranch.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Also removed some blank lines from the original patch and bumped up
the DBRev.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
this patch adds a negative-captcha feature to the purchase suggestions form
some info for the curious...
http://nedbatchelder.com/text/stopbots.htmlhttps://github.com/subwindow/negative-captchahttp://www.rubydoc.info/github/subwindow/negative-captcha/frames
to test this patch...
1/ apply patch
2/ enable 'suggestion' and 'AnonSuggestions' sysprefs
3/ attempt to add a 'purchase suggestion' in OPAC
adding the suggestion should succeed
4/ edit the koha-tmpl/opac-tmpl/bootstrap/en/modules/opac-suggestions.tt file,
to reveal the hidden 'negcap' field
replace line 87 opac-suggestions.tt, from...
<li id="negcap" style="position: absolute; left: -2000px;">
to ...
<li id="negcap">
5/ attempt to add another suggestion, and populate the 'negcap' field
adding the suggestion should fail
Signed-off-by: Christopher Brannon <cbrannon@cdalibrary.org>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Amended patch: Remove the bug report number in the comment since git log
cans provide the same result.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
This patch adds a line in opac-user.pl passing author info to opac-user.tt
Thanks to cait for helping me out and showing me how to solve this with half the amount of code.
Test plan:
* Reserve a book.
* Go to the opac and log in as the patron you reserved the book for.
* Apply the patch with change to opac-user.pl
* Revisit the opac and refresh it.
* See if author now shows up
Signed-off-by: Magnus Enger <digitalutvikling@gmail.com>
Created a hold. Author is not shown n the public catalogue before
applying the patch, but it does show after applying the patch. Way
to go, Viktor!
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Modifies showmarc and opac-showmarc to use new XSLT handler.
Removes cardview.pl as obsolete script.
Modifies C4/Record.pm and a typo in the test Record.t.
Test plan:
[1] catalogue/showmarc: Go to Cataloging. Search. Click Card.
[2] opac-showmarc: Go to opac detail, MARC view.
Open URL for plain view in new tab.
Change URL: Change viewas=html to viewas=card
[3] Verify that there are no references in the codebase to cardview.pl
[4] C4/Record.pm: Run the Record.t test in db_dependent.
This test uses marc2modsxml, triggering the change.
Additional: export to MODS from opac-detail.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Views Ok. Test pass. No more cardview. No koha-qa errors
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Currently, in opac-detail.pl, there exists a column named 'Location'.
This column lists the name of the holding branch, and the item's
location description. This can cause confusion to borrowers, as
they may assume that the holding branch is the *owning* branch
(homebranch) of an item.
This could cause a situation where a borrower waits for an
item to be returned to his or her library, only to find that
the library never owned that item, and it was transferred back
to its homebranch. It could also lead a borrower to falsely
assume that his or her home library does not own a copy of a
particular item because the borrower does not see an his or her
home library listed for any of the items on the record.
In addition, even when the holding branch is different
than the home branch, the item's shelving location is displayed,
even though that branch may not use that location.
This commit makes the item details table equivalent to the intranet
details page by adding a "Home Library" column, which displays the
item's home library, as well as the shelving location.
If singleBranchMode is enabled, this column disappears and the
"Location" column displays the shelving location only.
This commit adds two new system preferences:
OpacLocationBranchToDisplay, which defines whether
to display the holding library, the home library,
or both for the opac details page.
OpacLocationBranchToDisplayShelving, which defines
where the shelving location should be displayed,
under the home library, the holding library, or both.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Comment: Work as described. Tested all variations.
No koha-qa errors.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
QP-encode both mail header and mail body when sending baskets or
shelves. There is no need to Encode qp-encoded strings.
Note that this does not solve all possible encoding problems in the mail
sent. This is related to decoding CGI parameters and use of TT. That
problem is addressed in bug 11944.
Test plan:
Verify if sending a basket from opac and staff still works.
Check if sending a shelf (list) from opac and staff still functions as
expected.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Cart/List sent form opac/staff works
No koha-qa errors
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
When searching (at the OPAC or pro), facets can be enabled but never
disabled. So a user is obliged to relaunch the search.
This patch adds a new link "[x]" at the right of each selected facet.
This link relaunch the search without this facet.
Test plan:
- Launch a search (OPAC and pro)
- Enable some facets
- Disable some facets
Signed-off-by: sonia bouis <sonia.bouis@univ-lyon3.fr>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Patches pass all tests and QA script. Nice feature!
Tested in Boostrap and Prog, adding end removing multiple
facets in different sequences, adding and removing the
availability limit.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Records hidden with OpacSuppression are filtered from the search
results, but the opac-detail page is still visible if you know the
biblio number. This patch hides the detail page for suppressed biblios
by redirecting (controlled by the syspref OpacSuppressionRedirect)
either to opac-blocked (default), explaining that the record is blocked
(including optional explanatory text from the syspref
OpacSuppressionMessage) or to Koha's 404 page, giving no hint that a
biblio with that number exists in the system.
Test plan:
Make sure you have at least one record with 942$n == 1.
Set OpacSuppression to "Don't hide".
Do an OPAC search that should bring up your hidden record and other
records.
Observe that your record is found.
Open the detail page for the record.
Observe that it is accessible. Copy the URL for later(!).
Set OpacSuppression to "Hide".
Leave OpacSuppressionByIPRange blank.
Set OpacSuppressionRedirect to "an explanatory page ('This record is
blocked')."
Leave OpacSuppressionMessage blank for now.
Disable queryparser(!) (because of bug 10542).
Do a full zebra reindex.
Do an OPAC search that should bring up your hidden record and other
records.
Observe that your record is not found.
Open the opac-detail URL of the record (the one you copied before).
Observe that you are redirected to opac-blocked and it displays a
short standard message.
Edit OpacSuppressionMessage and input some text.
Open the opac-detail URL of the record again (the one you copied
before).
Observe that the text you entered in OpacSuppressionMessage is
displayed under the standard text you have seen before.
Set OpacSuppressionRedirect to "the 404 error page ('Not found')."
Open the opac-detail URL of the record again (the one you copied before).
Observe that you are redirected to Koha's 404 error page.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Also store interface (intranet, opac) in context to not have to pass it
as parameter.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
No koha-qa errors
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Comments on last patch.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Like biblio, this feature provides an authority search history.
This history is available for connected and disconnected user.
If the user is not logged in Koha, the history is stored in an
anonymous user sessin.
The search history feature is now factorized in a new module.
This patch adds:
- 1 new db field search_history.type. It permits to distinguish the
search type (biblio or authority).
- 1 new module C4::Search::History. It deals with 2 different storages:
DB or cookie
- 2 new UT files: t/Search/History.t and t/db_dependent/Search/History.t
- 1 new behavior: the 'Search history' link (on the top-right corner of
the screen) is always displayed.
Test plan:
1/ Switch on the 'EnableOpacSearchHistory' syspref.
2/ Go on the opac and log out.
3/ Launch some biblio and authority searches.
4/ Go on your search history page.
5/ Check that all yours searches are displayed.
6/ Click on some links and check that results are consistent.
7/ Delete your biblio history searches.
8/ Delete your authority searches history searches.
9/ Launch some biblio and authority searches
10/ Delete all your history (cross on the top-right corner)
11/ Check that all your history search is empty.
12/ Launch some biblio and authority searches.
13/ Login to your account.
14/ Check that all previous searches are displayed.
15/ Launch some biblio and authority searches.
16/ Check that these previous searches are displayed under "Current
session".
17/ Play with the 4 delete links (current / previous and biblio /
authority).
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
All patches together pass QA script and tests.
Also, new tests in t/db_dependent/ pass.
Tested in all 4 OPAC themes, being logged in and anonymous.
Anonymous search history will be appended to personal search
history after logging in.
Also verified that cleanup_database still purges search history,
now also including the authority searchs.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
See comments 86 and 88. This patch fixes a bad conflict resolution in a
previous patch.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Some corrections :
- opac-reserve.tt : opening <p> instead of closing
- opac-user.tt : warnexpired was in database format, adds the use
of KohaDates template plugin
- opac-user.tt : duplicated TT test : [% IF ( BORROWER_INF.warnexpired ) %]
and [% ELSIF ( BORROWER_INF.warnexpired ) %], maybe a merge error
- opac-user.tt : <string> instead of <strong>, maybe for HTML 6 :-)
- opac-user.pl : adding dateformat var to template is already done by Auth.pm
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script.
Testing notes:
- Database update
* Changes to kohastructure match changes done by the updatedatabase
statement. Feature is activated by default. Fixing 'yes' to be '1'
in a follow up.
* Ran database update succesfully.
* Note: Patrons are now blocked by default in new installations
AND in updated installations.
- System preference
* Verified system preference shows up correctly.
- Category configuration
* Add new patron category
* Edit existing patron category
* Delete patron category
* Check patron category summary table.
=> Verified all actions work as expected.
=> Verified chosen value for BlockExpiredPatronOpacActions'
is always displayed and saved correctly.
* Note: The new value is missing from the summary table.
* Note: The new value is also not shown when deleting a patron category.
- Check functionality
* Renew and place a hold for an NOT EXPIRED patron with
a) category: use syspref (default)
syspref: block (default)
b) category: use syspref (default)
syspref: don't block
c) category: block
syspref: don't block
d) category: block
syspref: block
e) category: don't block
sypref: block
* Verified renewals and placing holds were never blocked.
* Also verified that the warning from NotifyBorrowerDeparture
still shows up correctly.
* Renew and place a hold for an EXPIRED patron with
a) category: use syspref (default)
syspref: block (default)
=> OK, both actions are blocked.
b) category: use syspref (default)
syspref: don't block
=> OK, both actions possible.
c) category: block
syspref: don't block
=> OK, both actions are blocked.
d) category: block
syspref: block
=> OK, both actions are blocked.
e) category: don't block
sypref: block
=> OK, both actions possible.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
2014-04-06 Update: Will repeat and amend above test plan on last patch in this series.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
* Hide renewal column, buttons and links
* Fixes minor bug where upper-right table links would show even if
renewal impossible
* Cleans up some of the template formatting ( whitespace changes only )
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Test Plan:
1) Apply patch
2) Run updatedatabase.pl
3) Pick a patron, note the patron's category
5) Issue an item to this patron
4) Edit that category, set "Block expired patrons" to "Block"
5) Verify the patron cannot renew or place holds in the OPAC
6) Edit the category again, set "Block expired patrons" to
"Don't block"
7) Verify the patron *can* renew and place holds in the OPAC
8) Edit the category again, set "Block expired patrons" to
"Follow system preference BlockExpiredPatronOpacActions"
9) Set the system preference BlockExpiredPatronOpacActions to
"Block"
10) Verify the patron cannot renew or place holds in the OPAC
11) Set the system preference BlockExpiredPatronOpacActions to
"Don't block"
12) Verify the patron *can* renew and place holds in the OPAC
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Melia Meggs <melia@bywatersolutions.com>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Testing notes on last patch in series.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch fixes the following issue: in installations that are using
zebra DOM indexing for bibliographic records, tag searching in OPAC
doesn't work properly (clicking on any tag in OPAC leads to "404 error").
To test: ensure that with patch applied:
1) problems with tag searching get resolved for [some] test
configuration with biblio DOM indexing enabled,
2) there are no apparent tag-searching-related regressions in OPAC,
in some yet another test installation configured with legacy
(grs1) indexing mode for biblios.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
- catalog a record that includes umlauts äöü
- write a report, that has the record in the result set
- access the JSON output of the report
<OPAC BaseURL/cgi-bin/koha/svc/report?id=1
- verify the umlaut displays not correctly
- switch the encoding in the browser to 'western'/latin1
- verify the umlaut now displays correctly
- apply patch
- verify umlaut now displays correctly from the beginning
Based on paste from Galen Charlton.
Followed test plan. Result as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch teaches C4::Reports::Guided::execute_query()
how to accept a list of query parameter values. It then
follows-up on the main patch by simplifying how it converts
report parameters to a complete SQL query, and removes the
use of DBI->quote() and complicated regexes.
To test:
[1] Verify that using the OPAC svc/report service with
sql_params continues to work.
[2] Verify that there are no regressions with running
reports from the staff interface, both via the web
service and the reports interface.
[3] Verify that prove -v /db_dependent/Reports_Guided.t passes.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script.
No regressions found.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Test plan:
1/ Make a public report that contains SQL parameters
2/ Test it from the staff side
3/ Hit the url like
cgi-bin/koha/svc/report?id=1&sql_params=chris&sql_params=chris2
4/ Test you get JSON
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script.
Tested with a public report:
select * from items
- cgi-bin/koha/svc/report?id=6
- URL shows JSON and all items
select * from items where itype = <<itype>>
- cgi-bin/koha/svc/report?id=6&sql_params=BK
- URL shows JSON and only BK items
select * from items where itype = <<itype>> and homebranch = <<homebranch>>
- cgi-bin/koha/svc/report?id=6&sql_params=BK&sql_params=MPL
- URL shows JSON and only BK items in MPL
select * from items where itype = <<itype|itemtypes>> and homebranch = <<homebranch|branches>>
- same as above
- URL shows JSON and only BK items in MPL
select * from items where dateaccessioned = 2013-12-15
- cgi-bin/koha/svc/report?id=6&sql_params=BK&sql_params=MPL&sql_params=2013-12-15
- URL shows JSON and correct items
Note: This will currently only work for public reports!
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
[1] Use loop variable instead of $_ in opac-shareshelf.pl
[2] Adds Cancel button to Invite form (prog and bootstrap) in
opac-shareshelf.tt. Likewise adds Return link under an error
message in opac-shareshelf.tt.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Small fix to resolve a problem Dobrica noted on the bug report: if you
had to log in when accepting the share, the cookie was not passed
back to the server when redirecting to shelf display.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch handles:
[1] The response (acceptance) by the invited person.
If the person accepts this share, the private list of the sender will
be shown under Your lists on the shelves page. In OPAC 'Your private
lists' has been renamed to Your lists (just as in Staff). The Type
column shows Private or Shared for these lists; a list appears as
Shared as soon as an invitation has been accepted. The owner has the
options to Edit, Delete or Share; the invited person does not have
these options on the shared list.
[2] Removing an accepted share.
If a user accepted a share, they should also be able to remove it again.
The Remove Share button is visible on OPAC when viewing Your lists or
a particular shared list.
Note: AddShare has been extended to return a possible database error.
If the share invite could not be added, a mail will not be sent.
Test plan (for prog theme):
Enable pref OpacAllowSharingPrivateLists
User 1 creates new private list P1, perms: D-A-D, adds 2 items, sends share
User 1 checks your lists display: is P1 Private with Edit button?
User 2 accepts share: sees P1, but cannot add or delete items
User 2 checks your lists display again: P1 shows Shared without Edit?
User 1 checks your lists display again: P1 shows Shared with Edit?
User 2 tries to accept share again: should fail now
User 3 tries to accept share: should also fail
User 3 tries again, modifies shelfnumber and/or key in url: should also fail
User 2 creates new private list P2, perms: A-A-A, no items, sends share
User 2 checks your lists display: P2 shows Private with Edit?
User 1 accepts, adds one item
User 1 checks your lists display: P2 shows Shared without Edit?
User 2 checks your lists display: P2 shows Shared with Edit?
User 2 deletes item of user 1 (allowed)
User 2 deletes list P2
User 1 checks your lists display in opac or staff: P2 is gone?
User 1 creates private list P3, sends a share.
User 1 creates private list P4, adds one item, sends a share.
User 2 accepts the share for P3.
User 2 checks the shelves display, and removes share P3.
User 2 accepts the share for P4.
User 2 views shelf P4 with one item and confirms Remove share on that form.
User 2 checks shelves display again.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Dobrica Pavlinusic <dpavlin@rot13.org>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Plackified opac-shareshelf by moving global my variables into hashref
and explicitly passing paramters to the subroutines that
opac-shareshelf.pl uses.
Slightly changed base64ord and base64chr functions to more generic ones.
This patch also corrects the version of the GPL statement.
Test plan:
Verify if sending an share invitation still works (under prog theme).
Signed-off-by: Dobrica Pavlinusic <dpavlin@rot13.org>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch
- Adds a Share button for OPAC private lists.
- Allows you to send an invitation to share a list.
- Checks on validity of email addresses (with Email::Valid).
Test plan:
1) Sharing depends on syspref and login.
Toggle the pref OpacAllowSharingPrivateList.
If enabled, you should see the Share button in OPAC/Private lists.
Click on the Share button. You should get Share a list.
Logout and try to go back to opac/opac-shareshelf.pl
It should now present you the login form.
2) Try to share a public list or a list you do not own.
Find a security hole in the interface. Or hack the shareshelf URL and
replace the shelfnumber with a public list number.
3) Enter no email address or invalid ones (no domain, forbidden chars).
If you enter no address, submit should not work.
If you enter only wrong addresses (separated by: ,:; ), you get a
message.
4) Test if sending the invitation works.
Share one of your private lists. Enter your own email address.
After your proc_message_queue cronjob ran, you should have an email.
Check also if you see a new record in the virtualshelfshares table.
Note that the followup patch handles the second part of accepting this
share.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Dobrica Pavlinusic <dpavlin@rot13.org>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Test plan:
- send a list via email with the english version.
- translate templates and retry with another language.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works nicely. Links to the OPAC are correct.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
In Advanced Search, the list of available language is long and will only
get longer. For a library offering books in 2-3 languages, that is
offering too many options to the user (most of the small libraries we
deal with only offer documents in two languages).
Code changes:
Languages.pm: Extract getAllLanguages to make a more customizable
getLanguages (have getAllLanguage call it, so rest of codebase is
oblivious to the change). Build array returned based on system pref if
corresponding argument is set.
search.pl and opac-search.pl: call getLanguages instead of
getAllLanguages.
TESTING
0) All language codes are iso 639-2 (three characters)
1) in OPAC, Advanced search, open Language box, acknowledge 30+ items.
2) in Intranet, go to system preferences AdvancedSearchLanguages,
enter "ita|eng"
3) back in OPAC, refresh screen, acknowledge only Italian and English
are listed.
4) in Intranet, click Search then click "More options" to make the
Language box appear. Acknowledge limited options.
5) Regression Test: Back to the preference, empty the field then save.
Go back to the OPAC and Intranet search, refresh the page, then the
Language drop-box will now contain 30+ items.
Signed-off-by: Mathieu Saby <mathieu.saby@univ-rennes2.fr>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
If hidelostitems is enabled, and the result of an opac search is a single
lost item, then the OPAC will display a 404 error, rather than a
"no results" screen.
Test Plan:
1) Catalog a record/item such that it is the only result for some search
e.g. Give it the title 'zxcvb'
2) Enable hidelostitems
3) Mark this item as lost
4) Perform an OPAC search that should result in a redirect to this record
5) Notice you a redirected to a 404 error
6) Apply this patch
7) Repeat step 4
8) Note you new get a "No results found!" page instead
Signed-off-by: Christopher Brannon <cbrannon@cdalibrary.org>
Signed-off-by: Michot <nmichot@voila.fr>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This parameter is a boolean, if true, the hours won't be displayed if
the time is 23:59 (24hr format) or 11:59 PM (12hr format).
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
There are 2 useless routines in the Koha::DateUtils
module:output_pref_due and format_sqlduedatetime. We can call
output_pref and format_datetime with dateonly = 0.
format_sqlduedatetime is only used in one place: opac-reserve.pl
Test plan:
1/ Verify on the opac-reserve.pl page that the date is correctly
displayed for for onloan items (you should use the "specific copy"
feature).
2/ Launch prove t/DateUtils.t UT file and verify all UT pass.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Due date on opac-reserve shown correctly. Unit tests pass.
Did a grep on both function names.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
No references to subs found. Passes koha-qa.pl, t and xt
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch makes opac-user.pl and the bootstrap version of opac-user.tt
handle the new renewal error "too_soon".
To test:
1) Set global syspref "opacthemes" to bootstrap.
2) Set global syspref "OpacRenewalAllowed" to Allow.
3) Test the same things as in previous patch, this time for the OPAC
summary page.
Sponsored-by: Hochschule für Gesundheit (hsg), Germany
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
This adds the ability to specify whether staff, OPAC,
or slip news entries apply to all libraries or just a
particular library.
With the branch parameter added to key functions in
C4/NewsChannels.pm, function calls in C4/Members.pm,
mainpage.pl, opac/opac-main.pl, tools/koha-news.pl, and
t/db_dependent/NewsChannels.t were needed.
Some license texts were updated.
Templates were modified to display, allow for entry and editing
of the branches selected.
TEST PLAN
---------
1) Having logged into the staff client, is the news displaying
correctly? Have you entered a news item which should not
display for this branch of logged in user?
2) Find a patron (with some items checked out?)
3) Print a slip
- News which is labelled 'All Branches' or for the same branch
as the one printing the slip should display on the slip.
- THIS DOES NOT AFFECT QUICK SLIPS
4) Home -> Tools -> News
- Can you edit a news item?
- Does the change save correctly?
- Can you filter based on location and branch correctly?
- Can you add a new entry correctly?
- Can you delete an entry correctly?
5) Open an OPAC client.
- Does only the news for all branches display?
6) Log into the OPAC client.
- Does the news for all branches and the specific branch display?
7) prove -v t/db_dependent/NewsChannels.t
- Does it run and all succeed?
- Does the code seem to catch the required cases?
8) Comparing the patched and unpatched versions of files affected,
are the license changes missing anything?
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
On "MARC view" in the OPAC, clicking on "Plain view" does not work
for UNIMARC and NORMARC.
To test:
- Make sure you have a UNIMARC or NORMARC setup
- Go to the "MARC view" of a record in the OPAC
- Click on "view plain" and observe the "Sorry, plain view is
temporarily unavailable." error message
- Apply the patch
- Click on "view plain" and observe that a plain view of the MARC
record is now displayed
- Sign off
I have only tested this on NORMARC, it might be good if someone
can test on UNIMARC.
Updated 2014-03-13: Incoroprates changes suggested by Marcel.
Test plan is the same as before.
Updated 2014-03-13: Tested in my UNIMARC system.
toggled opactheme to all three values, with OPACXSLTDetailsDisplay
and OPACXSLTResultsDisplay both set to default.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Tested with MARC21 and UNIMARC, passes all tests and QA script.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
To test :
1) Search for a subscription with patron notification active
2) If you're not logged in, a message warns you that you must log
in to subscribe to notification on new issues
3) If you log in, and have not yet subscribed to this routing list,
you've got a link to subscribe
4) Once you have subscribed, you've got a link to unsubscribe
5) If you log out, you've got a message saying you must log in to
subscribe
6) If you log in with another user, you've got the link to subscribe
or unsubscribe depending on if he has already subscribed.
Signed-off-by: remy juliette <remy.gonzalves@iepg.fr>
Signed-off-by: Aurelie Fichot <aurelie.fichot@iepg.fr>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: remy juliette <remy.gonzalves@iepg.fr>
Signed-off-by: Aurelie Fichot <aurelie.fichot@iepg.fr>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes QA script and tests.
Instead of hiding the feature completely, now a message
tells the user to login to subscribe to the email
notifications.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
When OpacHighlightedWords syspref is on, the current search terms are
highlighted in results and detail pages.
This workes in detail page with the URL param 'query_desc'.
This parameter must be managed in results browser (appears when
OpacBrowseResults syspref is on) links.
This patch adds query_desc parameter in results list and changes next
nd previous links to be build into TT instead of perl to manage
query_desc parameter only into TT.
Test plan :
- Edit sysprefs : OpacHighlightedWords on, OpacBrowseResults on.
- Perform a search with a term existing into title
=> You see the term highlighted in search results
- Go to detail of a result with highlight
=> You see the term highlighted
- Click on "Next"
=> you see query_desc in URL, and if search term is present it is
highlighted
- Same for "Previous"
- Click on "Browse results"
- Click on a result
=> you see query_desc in URL, and if search term is present it is
highlighted
Signed-off-by: Aurélie <aurelie.fichot@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
