Test plan: see next patch
Signed-off-by: Brendan Lawlor <blawlor@clamsnet.org>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit eff15066b2)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Fixed typo in test output.
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 285a0fc74d)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Test Plan:
1) Place a hold on an item
2) Build the holds queue
3) Check out the item to a different patron than the one
targeted in the holds queue
4) Verify the holds queue viewer still shows that item and patron
5) Apply this patch
6) Repeat stepts 1 through 3
7) Verify the holds queue viewer no longer shows that patron and item!
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 0eced80866)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Test Plan:
1) Generate the holds queue
2) Load the holds queue viewer page
3) Apply this patch
4) Restart all the things!
5) Reload the page
6) Note nothing has changed
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Tests had a few problems:
- They weren't wrapped in a transaction explicitly
- They called Koha::Biblios->delete!
- They failed if run a couple times
This patch:
- Wraps things in a transaction
- Removes not-required things ($target_rs variable not used)
- Preserves the tests logic, but filters the resultset on the
biblionumber instead of deleting all the database which can fail
depending on FK constraints.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Right now the holds queue builder starts filling bib-level holds with
items whose patron's home library matches the item's home library.
It would be good and reasonable to have the option to prioritize
item's whose patron's home library matches the item's holding library
to minimize transfers.
Signed-off-by: Andrew Fuerste-Henry <andrewfh@dubcolib.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
It has been missed on bug 17600.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Adjusted commit title.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
On bug 17591 we discovered that there was something weird going on with
the way we export and use subroutines/modules.
This patch tries to standardize our EXPORT to use EXPORT_OK only.
That way we will need to explicitely define the subroutine we want to
use from a module.
This patch is a squashed version of:
Bug 17600: After export.pl
Bug 17600: After perlimport
Bug 17600: Manual changes
Bug 17600: Other manual changes after second perlimports run
Bug 17600: Fix tests
And a lot of other manual changes.
export.pl is a dirty script that can be found on bug 17600.
"perlimport" is:
git clone https://github.com/oalders/App-perlimports.git
cd App-perlimports/
cpanm --installdeps .
export PERL5LIB="$PERL5LIB:/kohadevbox/koha/App-perlimports/lib"
find . \( -name "*.pl" -o -name "*.pm" \) -exec perl App-perlimports/script/perlimports --inplace-edit --no-preserve-unused --filename {} \;
The ideas of this patch are to:
* use EXPORT_OK instead of EXPORT
* perltidy the EXPORT_OK list
* remove '&' before the subroutine names
* remove some uneeded use statements
* explicitely import the subroutines we need within the controllers or
modules
Note that the private subroutines (starting with _) should not be
exported (and not used from outside of the module except from tests).
EXPORT vs EXPORT_OK (from
https://www.thegeekstuff.com/2010/06/perl-exporter-examples/)
"""
Export allows to export the functions and variables of modules to user’s namespace using the standard import method. This way, we don’t need to create the objects for the modules to access it’s members.
@EXPORT and @EXPORT_OK are the two main variables used during export operation.
@EXPORT contains list of symbols (subroutines and variables) of the module to be exported into the caller namespace.
@EXPORT_OK does export of symbols on demand basis.
"""
If this patch caused a conflict with a patch you wrote prior to its
push:
* Make sure you are not reintroducing a "use" statement that has been
removed
* "$subroutine" is not exported by the C4::$MODULE module
means that you need to add the subroutine to the @EXPORT_OK list
* Bareword "$subroutine" not allowed while "strict subs"
means that you didn't imported the subroutine from the module:
- use $MODULE qw( $subroutine list );
You can also use the fully qualified namespace: C4::$MODULE::$subroutine
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch fixes a rebase issue, and also makes sure the tests do not
rely on any prior data. The query on tmp_holdsqueue is done against the
actual reserve_id so no need to delete all the data from the
tmp_holdsqueue and hold_fill_targets table.
I also noticed the previous subtest wasn't run inside a transaction even
if the code was designed to not depend on prior data as well.
To test:
1. Apply this patch
2. Run:
$ kshell
k$ prove t/db_dependent/HoldsQueue.t
=> SUCCESS: Tests pass!
3. Sign off :-D
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This warn only appears when:
The borrower and item branches match
AND
The hold fulfillment policy is any or the pickupbranch matches the items branch specified by hold_fulfillment_policy
AND
The request has an itemtype set
To trigger we simply add some itemtype to existing hold requests in the test
To test:
1 - prove -v t/db_dependent/HoldsQueue.t
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
MapItemsToHoldRequests has three sections: Local holds, item level holds, bib level holds
Only one of them was setting the reserve_id. This patch makes al three set it and adds tests
To test:
1 - Repeat test plan on bug
2 - sudo koha-mysql kohadev
SELECT * FROM hold_fill_targets
3 - Ensure reserve_id is set at appropriate times
4 - prove -v t/db_dependent/HoldsQueue.t
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Bug 18958: (QA follow-up) Fix number of tests
In HoldsQueue.t
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Sponsored-by: Cooperative Information Network (CIN)
Signed-off-by: Christopher Brannon <cbrannon@cdalibrary.org>
Signed-off-by: Christopher Brannon <cbrannon@cdalibrary.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Bug 23934 removed the limitation that prevented item level holds from
getting local holds priority. The problem is the code has never checked
if the item level hold matches the given item! This means the wrong item
may be requested to fill an item level hold.
Test Plan:
1) Create 3 items on a record
2) Place a hold for the 2nd item you created
4) Ensure that hold would be picked up by local holds priority
5) Build the holds queue
6) Note the holds queue is asking for the wrong item!
7) Apply this patch
8) Rebuild the holds queue
9) Holds queue should now be asking for the correct item!
Signed-off-by: Kim Peine <kim@williston.lib.vt.us>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kim Peine <kim@williston.lib.vt.us>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
The number of parameters of AddReserve makes it hard to read and
maintain.
This patch replace it with a hashref, which will make the calls more
readable.
Moreover the bibitems has been removed as it was not used by the
subroutine.
Test plan:
- Make sure the tests pass
- Read the diff and search for typos
- Place a hold on few items
Note for QA: reservation_date and expiration_date do not match the DB column's names,
should we?
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Bunch of tests broke after moving from issuingrules to
circulation_rules. This accomodates the tests for this refactoring and
DB change.
The itemtype did not exist in the DB. We create it at the beginning of
the tests. Ideally we would like to create it filling the form.
Signed-off-by: Minna Kivinen <minna.kivinen@hamk.fi>
Signed-off-by: Joonas Kylmälä <joonas.kylmala@helsinki.fi>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This necessitates moving the circ rules from using '*' to using
undef/NULL.
Signed-off-by: Minna Kivinen <minna.kivinen@hamk.fi>
Signed-off-by: Joonas Kylmälä <joonas.kylmala@helsinki.fi>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Test Plan:
1) Apply dependancies
2) Apply this patch set
3) Run updatedatabase.pl
4) Ensure holdallowed and hold_fulfillment_policy rules behavior remains unchanged
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Agustin Moyano <agustinmoyano@theke.io>
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Branch transfer limits are respected for placing holds in the OPAC but nowhere else. This should be remedied.
Test Plan:
1) Set up a branch transfer limit from Library A to Library B
2) Verify you cannot set up a hold for an item from Library A for pickup at Library B from the staff interface ( without overriding )
3) Verify you cannot place that hold via ILS-DI
4) Verify you cannot place that hold via SIP
4) Verify a forced hold from Library A to Library B will not show up in the holds queue
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch adds a new Koha::Hold->cancel method and replaces the calls
to C4::Reserves::CancelReserve with it.
Test plan:
- Add and cancel holds
- Change priority of holds
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Replaces TRUNCATE by DELETE, since truncate implicitly commits. We don't
need to do that here. (Would complicate testing it too.)
Fixes typo disablig.
Add a simple test to HoldsQueue.t.
Test plan:
Run t/db_dependent/HoldsQueue.t
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Two discussions on koha-devel lead to the same conclusion:
biblioitems.marcxml should be moved out this table
- biblio and biblioitems
http://lists.koha-community.org/pipermail/koha-devel/2013-April/039239.html
- biblioitems.marcxml & biblioitems.marc / HUGE performance issue !
http://lists.koha-community.org/pipermail/koha-devel/2016-July/042821.html
There are several goals to do it:
- Performance
As Paul Poulain wrote, a simple query like
SELECT publicationyear, count(publicationyear) FROM biblioitems GROUP BY publicationyear;
takes more than 10min on a DB with more than 1M bibliographic records
but only 3sec (!) on the same DB without the biblioitems.marcxml field
Note that priori to this patch set, the biblioitems.marcxml was not
retrieved systematically, but was, at least, in
C4::Acquisition::GetOrdersByBiblionumber and C4::Acquisition::GetOrders
- Flexibility
Storing the marcxml in a specific table would allow use to store several
kind of metadata (USMARC, MARCXML, MIJ, etc.) and different formats (marcflavour)
- Clean code
It would be a first step toward Koha::MetadataRecord for bibliographic
records (not done in this patch set).
Test plan:
- Update the DBIC Schema
- Add / Edit / Delete / Import / Export bibliographic records
- Add items
- Reindex records using ES
- Confirm that the following scripts still work:
* misc/cronjobs/delete_records_via_leader.pl
* misc/migration_tools/build_oai_sets.pl
- Look at the reading history at the OPAC (opac-readingrecord.pl)
- At the OPAC, click on a tag, you must see the result
Note: Changes in Koha/OAI/Server/ListRecords.pm is planned on bug 15108.
Signed-off-by: Mason James <mtj@kohaaloha.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Zeno Tajoli <z.tajoli@cineca.it>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
If memcached is running, the pref's value will be set in cache, what we
do not want.
t/db_dependent/Context.t and t/db_dependent/sysprefs.t are exceptions
for obvious reasons.
Test plan:
Make sure all these tests still pass
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
It appears that the LocalHoldsPriority feature and the Holds Queue are
fundamentally at odds with each other.
The problem appears to be that both are attempting to choose the best
way to fill holds. When you are using the holds queue and you check in
an item that has been selected by the holds queue builder, that part of
Koha where the LocalHoldsPriority feature lives doesn't get to see all
the holds in order to pick the best one. Instead only the hold selected
by the holds queue builder is returned so to the LocalHoldsPriority
feature, that is only one hold to pick from!
Test Plan:
1) Apply this patch
2) prove t/db_dependent/HoldsQueue.t
3) All tests should pass
Signed-off-by: Barton Chittenden barton@bywatersolutions.com
Signed-off-by: Dani Elder <dani@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Instead of relying on existing data, we use new TestBuilder recs.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
No need to bail out, if we are using TestBuilder.
Somehow, this test passes with me if we add a new record, and if
we do not, it fails (using BK as the first itemtype with notforloan
is 0).
Looking further, we should imo remove the Koha::ItemTypes searches
here and not depend on existing data. Just add some item types.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Looking at commit aafe73eefb
Bug 14828: Use Koha::ItemType[s] everywhere C4::ItemType was used
-my @item_types = C4::ItemType->all;
-my @for_loan = grep { $_->{notforloan} == 0 } @item_types
- or BAIL_OUT("No adequate itemtype");
-my $itemtype = $for_loan[0]->{itemtype};
+my $itemtype = Koha::ItemTypes->search({ notforloan => 1 })->next;
+$itemtype or BAIL_OUT("No adequate itemtype"); #FIXME Should be $itemtype = $itemtype->itemtype
It seems that the tests expect itemtypes for loan.
Test plan:
prove t/db_dependent/HoldsQueue.t
should still return green
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works as advertised. No qa test tool errors
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Adding follow-up.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Some libraries would like the ability to select the itemtype to request
when placing holds. For example, if a record has 3 copies of BookA and 3
copies of BookA in large print, this feature would allow a person to
place a hold on the record, but still be able to target only the Large
Print edition so that the first Large Print copy that becomes available
is targeted, rather than forcing the patron to select a particular copy
to hold.
Test Plan:
1) Apply this patch
2) Run updatedatabase.pl
3) Create a record with items of two or more itemtypes
4) Place a record level hold on the record while choosing one particular
itemtype
5) Check in an item from the record that is not of that itemtype
6) Notee it is not trapped for the hold
7) Check in an item from the record that does match the selected itemtype
8) Note the item is trapped for the hold
Signed-off-by: Andreas Hedström Mace <andreas.hedstrom.mace@sub.su.se>
Signed-off-by: Benjamin Rokseth <benjamin.rokseth@kul.oslo.kommune.no>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Some libraries would like to be able to limit hold filling to items that
match the pickup library for a hold based on the item's home or holding
library. The patron's home library should not affect whether a patron
can place the hold, instead the hold will only be fillable when an item
matching the pickup location becomes available.
Test Plan:
1) Apply this patch
2) Run updatedatabase.pl
3) Note the new "Hold pickup library match" rules for "checkout, hold,
and return policy" and for "holds policy by item type"
4) Set the policy to "item's holding library"
5) Place a hold where the item's holding branch does not match
the pickup branch
6) Check in the item
7) Note it is not trapped for the hold
8) Update the item's holding branch to match the pickup branch
8) Check in the item
9) Note the item is trapped for the hold
10) Repeat steps 4-9 but for home branch instead
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works as described
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
This patch should not be the way to make these tests pass.
The prefs should not be updated using set_preference, it will modify the
values in the cache.
I have no idea how to make them pass using the correct way, please help
:)
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Signed-off-by: Jacek Ablewicz <abl@biblos.pk.edu.pl>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Unless in t/db_dependent/Context.t where we want to test the cache
behaviors.
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Signed-off-by: Jacek Ablewicz <abl@biblos.pk.edu.pl>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Bug 12803 [QA Followup] - Remove use of C4::Dates
C4::Dates was being included, but not used in the code!
Bug 12803 [QA Followup] - Fix koha-qa.pl errors
Bug 12803 [QA Followup] - Update unit tests due to changes in master
Bug 12803 [QA Followup] - Fix to stop failing unit tests
Bug 12803 [QA Followup] - Remove duplicate 'use' lines
Bug 12803 [QA Followup] - Remove NO_CACHE
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
The holds queue is typically generated many times a day in order to
select items to fill holds. Often these items are to be sent to a
different library. However, if the library whose item is picked to fill
a hold is closed, that hold will remain unfilled even if there are other
open libraries who own that item. It would be helpful if we could skip
closed libraries for the purpose of selecting items to fill holds.
Test Plan:
1) Apply this patch
2) Run updatedatabase.pl
3) Create a record with two items on it, one at Branch A, and one at
Branch B
4) Place a hold for pickup at Branch C
5) Generate the holds queue
6) Note which branch's item is selected for the hold
7) Enable the new system preference HoldsQueueSkipClosed
8) Add today as a holiday for that branch noted in step 6
9) Regenerate the holds queue
10) View the holds queue, notice the item selected is not from
the closed branch!
11) prove t/db_dependent/HoldsQueue.t
Signed-off by: Jason Robb <jrobb@sekls.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
This patch mainly replaces C4::ItemType->all with
Koha::ItemTypes->search.
Test plan:
At the places where the C4::ItemType module was used, confirm there is
no regression:
- acqui/neworderempty.pl
- catalogue/itemsearch.pl
- admin/item_circulation_alerts.pl
and the 2 cataloguing plugins:
- marc21_linking_section.pl
- unimarc_field_4XX.pl
QA step:
prove t/db_dependent/HoldsQueue.t should return green
Note that the tests were buggy.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
