Currently koha-disable ONLY disables the instance in the apache conf
file. Presumably if you want to disable the instance, you also want
its processes to stop, so this patch will stop zebra, if running,
and SIP, if enabled.
Depends on Bug 13784.
To Test:
1) Have an enabled instance, with zebra and SIP running.
2) Run koha-disable INST. Note that after, both zebra and SIP
will still be running.
3) Re-enable INST.
4) Apply patch, and then copy debian/scripts/koha-disable to
package site, over /usr/sbin/koha-disable.
5) Run koha-disable INST. You should now see that both zebra
and SIP have been stopped.
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Robin Sheat <robin@catalyst.net.nz>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Currently koha-stop-zebra will not stop zebra for disabled instances. It should
work more like koha-stop-sip, which does work for disabled instances. Also,
koha-stop-zebra is called by '/etc/init.d/koha-common stop' which clearly
should also apply to disabled instances.
To Test:
1) Disable a koha instance.
2) Run koha-stop-zebra INSTANCE. You should get message
"Instance INSTANCE disabled. No action taken."
3) Apply patch, and copy patched file debian/scripts/koha-stop-zebra
to package site over /usr/sbin/koha-stop-zebra.
4) Disable koha instance.
5) Run koha-stop-zebra INSTANCE. It should now stop zebra.
http://bugs.koha-community.org/show_bug.cgi?id=13784
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Robin Sheat <robin@catalyst.net.nz>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
An incorrect conditional makes the indexer daemon fail to load.
To test:
- Enable the indexer daemon on packages [1]
- Restart koha-common:
$ service koha-common restart
- Run
$ ps waux | grep koha-indexer
=> FAIL: there's no reference to the rebuild_zebra.pl script
(line should look like *rebuild_zebra.pl -daemon*)
Run ps -ef | grep rebuild_zebra.pl too to make sure.
- Apply the patch, repeat the steps
=> SUCCESS: the rebuild_zebra.pl script is ran
- Sign off :-D
Thanks
Sponsored-by: Universidad Nacional de Cordoba
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch corrects the call to 'basename' inside the script so it correctly
shows the language code when asked to list the available languages.
To test:
- On a packages install, run:
$ koha-translate --list --available
=> FAIL: It shows:
am-Ethi-opac-bootstrap.po
ar-Arab-opac-bootstrap.po
az-AZ-opac-bootstrap.po
be-BY-opac-bootstrap.po
ben-opac-bootstrap.po
...
- Apply the patch
- Copy the patched debian/scripts/koha-translate script to your packages setup.
- Run:
$ koha-translate --list --available
=> SUCCESS: It shows:
am-Ethi
ar-Arab
az-AZ
be-BY
ben
...
- Sign off :-D
Sponsored-by: Universidad Nacional de Cordoba
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
With the fixing of the namespace in the SIP code, we don't need to
modify the PERL5LIB to have the old one.
To test:
* do a package install using this and the other patches on bug 7904
* enable SIP
* make sure koha-start-sip and koha-stop-sip work
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Add greek as lang definition in installer.
Developed in collaboration with Giannis Kourmoulis <ikourmou@lib.auth.gr>
Test plan :
- Install using "gr" in "Primary language for Zebra indexing"
- check gr is used in etc/zebradb/zebra-*.cfg
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
To test:
Package up a branch with this patch
install that package
create a site - sudo koha-create --create-db testdisable
enable a site - sudo koha-enable testdisable
check it's enabled - sudo koha-list --enabled
* it should show up
disable a site - sudo koha-disable testdisable
Do this for both debian squeeze/wheezy and ubuntu 12.04 and 14.04, if you can. I'd like to see a sign off from a debian (sq/wh)eez(e/y) or ubuntu 12 user, because I could only test reliably on ubuntu 14.04.
* make sure apache restarts and no errors are produced
check it's disabled - sudo koha-list --enabled
* it should not show up
check the site is still there - sudo koha-list
* it should still be there
check that the config file has the Include for disabling uncommented
* the line Include /etc/koha/apache-shared-disable.conf should not have a # in front.
Re-enable the site - sudo koha-enable testdisable
* the line Include /etc/koha/apache-shared-disable.conf should have a # in front.
And the final question - does the site work? All other functions unchanged?
Signed-off-by: Mason James <mtj@kohaaloha.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Works as expected. code reads better too.
Edit: I added a missing space in one line.
This patch adds two parameters to the koha-create command:
--enable-sru: makes the koha-create script enabled the SRU server for
the created instance
--sru-port: lets the user specify a desired port for the SRU server
to listen at. It defaults to 7090
To test:
- Apply the patch on top of master
- Build your own package and install / can be tested just using the koha-create
command on a 3.16+ packages install
- Create an instance as usual (i.e. without --enable-sru and --sru-port)
=> SUCCESS: The instance is created, the publicserver sections are
both commented out. The first publicserver section has 7090 set as the
listening port.
- Create an instance as usual, passing --sru-port 456
=> SUCCESS: The instance is created, the port is set but the publicserver sections
are commented out
- Create an instance with --enable-sru (with and without --sru-port)
=> SUCCESS: Verify the instance is created as expected, with the SRU server enabled
(port 7090 if no --sru-port passed, the one we chose otherwise).
- Verify that the docs also talk about this new parameters addition.
- Sign off :-D
Regards
To+
Sponsored-by: Universidad Nacional de Cordoba
Signed-off-by: Jesse Maseto <jesse@bywatersolutions.com>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Robin Sheat <robin@catalyst.net.nz>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
To test:
* Build a package and install it, and verify that there are no errors.
* Play around with koha-translate, listing, adding, and removing
languages.
Note: one reference to prog and ccsr remains in koha-translate. This is
to allow it to remove any pre-existing translations on an upgrade.
Note 2: prog translations are still being installed, I think this is due
to the underlying translation system doing it.
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Short:
Launch an indexing daemon (rebuild_zebra.pl -daemon) process for each
enabled instance. Enabling/disabling the use of the indexer is handled
by global configuration variables in /etc/default/koha-common.
Also provides command line tools to manage the running indexer daemons
for your instances.
Long:
Using an indexing daemon avoids launching a new interpreter each time
the cron triggers the indexing, and also allows sub-minute incremental
reindexing, a requirement from our librarians.[1]
Using the indexer daemon could remain "experimental" until it gets more
testing; so is disabled by default initially. To enable the use of the
indexer the user has to tweak the /etc/default/koha-common config file.
Specifically the USE_INDEXER_DAEMON variable, which is clearly explained
in the file.
Frecquency defaults to 5 sec, and can be changed by tweaking the
/etc/default/koha-common config file too.
This patch uses rebuild_zebra.pl in daemon mode, but it is crafted to
allow changing the indexing daemon and passing specific option switches
it might need.
Regards
To+
[1] This is the .deb version of http://bugs.koha-community.org/bugzilla3/show_bug.cgi?id=8519
Sponsored-by: Universidad Nacional de Cordoba
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
koha-foreach has been modified to replace __instancename__ with $name
on each iteration using sed.
The docbook file for koha-foreach has also been updated to reflect the
new functionality.
To test:
koha-foreach ls -ld /etc/koha/sites/__instancename__
should list directories instead of giving an error message.
Signed-off-by: Magnus Enger <digitalutvikling@gmail.com>
The suggested example with ls works as expected, as does my
more complex example with fines.pl:
koha-foreach --enabled /usr/share/koha/bin/cronjobs/fines.pl \
--out /var/log/koha/__instancename__/
The man page looks good too.
Signed-off-by: Robin Sheat <robin@catalyst.net.nz>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
As the way we need to reference Apache instance names has now changed
between 2.2 and 2.4, we need to try it out both ways to make sure we get
it right.
This also allows koha-create/koha-disable to try the .conf version of
the name if the first one doesn't work.
To test:
* Create an instance on an Apache 2.2 system with koha < 3.16
* Upgrade to 3.16 with this patch, saying 'yes' to the renaming question
** Make sure you don't see the warning: Warning: problem enabling $site
in Apache
* Do a 'service apache2 restart'
* Make sure you can still access the instance
* Make sure that /etc/apache2/sites-enabled/instance.conf exists as a link
to /etc/apache2/sites-available/instance.conf
* Check that koha-create and koha-remove behave like you'd expect.
Note:
* If you need to make debconf forget that it asked you the question
about renaming so that it'll do it again, then run:
echo "unregister koha-common/rename-apache-vhost-files" | sudo debconf-communicate koha-common
* 'debconf-show koha-common' will show you the current debconf
configuration.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
As asked by Robin, a bash lib of functions is introduced with the common
functions to be reused. Most of the scripts are modified (reduced) to
include this file and the repeated functions cleaned.
No noticeable change in behaviour should be noticed.
As I've been todl in #debian-mentors, it is used that files for inclusion
should be installed at the apps directory (i.e. /usr/share/koha/) so this
patch makes the install script put the file in the bin/ directory.
All koha-* scripts assume the file is there already (and fail otherwise).
Sponsored-by: Universidad Nacional de Cordoba
Signed-off-by: Robin Sheat <robin@catalyst.net.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Apache 2.4 expects the sites definition files use the sufix '.conf'
To reproduce:
- Install the 'koha-common' package on Debian 7 or Ubuntu 13.10+
(both known to include Apache 2.4).
- Create an instance (for example testlibrary) using the supplied
commands:
$ koha-create --create-db testlibrary
> FAIL: apache reports an error like this:
"ERROR: Site testlibrary does not exist!"
This patch adds a test on the Apache version and appends the ".conf"
sufix if needed.
To test:
1st step: koha-create gets fixed:
-- The hard way --
- Apply the patch, and build the koha-common package on top of this
commit.
- Install the built package on an Apache 2.4 Debian-based distro (Debian 7
or Ubuntu 13.10 will work)
- Create a test instance:
$ koha-create --create-db testlibrary
> SUCCESS: no more apache sites related error.
-- The easy way --
- Apply the patch, and copy the koha-create into an Apache 2.4
Debian-based distro
- Create a test instance using the koha-create script you just
copied:
$ ./koha-create --create-db testlibrary
> SUCCESS: no more apache sites related error.
2nd step: the rest of the touched scripts keep working as usual
koha-disable
koha-dump
koha-enable
koha-list
koha-remove
koha-restart-zebra
koha-stop-zebra
koha-start-zebra
They should all keep working. Can be tested "the easy way" too.
Note: there might be another issues regarding Apache 2.4 deployments
like the need for
$ a2enmod access_compat
and perhaps some directory permissions tweak, which I think should be
properly documented on the install instructions.
Sponsored-by: Universidad Nacional de Cordoba
Signed-off-by: Robin Sheat <robin@catalyst.net.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch adds the koha-mysqlcheck script, as a "frontend" for
the mysqlcheck command. It can be used to check the integrity of
database tables, as well as to repair them. See "man mysqlcheck"
for more information.
The script takes a Koha instance name as its only required
parameter. Any other parameters provided before the instance
name are passed directly to mysqlcheck, which means that all
the functionality of mysqlcheck is available through this script.
To test the script:
- Apply the patch, build your own packages and install them, or
- copy koha-mysqlcheck to a server already running off packages
- Run some variations of the command, with and without arguments,
and check that the output makes sense. E.g.:
sudo koha-mysqlcheck myinstance
sudo koha-mysqlcheck -e myinstance # Extended checks
sudo koha-mysqlcheck -e -v myinstance # Extended checks and verbose
- See "man mysqlcheck" for other relevant options
To test the man page:
- Run these commands and look at the formatted man page:
$ xsltproc /usr/share/xml/docbook/stylesheet/docbook-xsl/manpages/docbook.xsl \
debian/docs/koha-mysqlcheck.xml
$ man -l koha-mysqlcheck.8
- Make sure this test passes:
$ prove -v xt/verify-debian-docbook.t
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
While adding the --help and -h switches I forgot to change to arguments
count validation so that one can actually use those parameters (i.e.
koha-create should accept being invoked with only one parameter).
This patch just changes the minimum parateres required from 2 to 1.
To reproduce:
- Run 'koha-create --help' from master
=> Usage information is printed BUT ALSO an "Error: wrong parameters"
message
- Apply the patch and
- Run 'koha-create --help'
=> Usage informatio it printed and no error message.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
'en' is not a translation and it doesn't make any sense to return it as
part of the installed translations or the available ones.
It becomes relevant to remove it as users upgrading their installed
translations end up grepping the output to remove 'en' like in:
for lang in $(koha-translate --list | grep -v -x -e 'en') ; do
koha-translate --update $lang
done
instead of simply issuing the koha-translate --list command.
To test:
- Run
./koha-translate --list
./koha-translate --list --available
=> It shouldn't return 'en' in the result list.
Sponsored-by: Universidad Nacional de Cordoba
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
The -v and --verbose option switches add the --verbose switch to the
misc/translator/translate script call in the packages' 'koha-translate'
command.
The docs are updated accordingly.
Sponsored-by: Universidad Nacional de Cordoba
Signed-off-by: Magnus Enger <magnus@enger.priv.no>
Works as expected with and without -v. Man page looks good.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch makes koha-create print better and more descriptive usage
information. Also adds the --help and -h switches.
Sponsored-by: Universidad Nacional de Cordoba
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Removed trailing " from:
$scriptname [db usage mode] [options] instancename"
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
The koha-translate's usage message has a couple of inconsistencies:
'--all' should be '--available'
and '--help' is missing from the usage examples.
Sponsored-by: Universidad Nacional de Cordoba
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, tested using instructions on
http://wiki.koha-community.org/wiki/Testing_man_pages
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Koha requires mod_rewrite. If it's not enabled in Apache, then
koha-create will now abort with a helpful error message. Also adds a
warning when not run as root to avoid confusing errors.
Test plan:
* apply the patch
* a2dismod rewrite
* run koha-create without sudo, note the error about being root
* run koha-create with sudo, note the error about rewrite
* a2enmod rewrute
* repeat test above, note that it works
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Works as expected.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Older versions of Koha didn't have <backupdir>...</backupdir> defined in
koha-conf.xml. The koha-dump script is aware of this, and checks to see
if it's there. However, if it's not, xmlstarlet returns a non-0 error
code which causes the script to abort due to running under set -e.
Test plan:
* Remove backupdir from koha-conf.xml
* Run koha-dump, notice that it doesn't do backups
* Apply patch
* Run koha-dump again, notice that it does do backups
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The fallback method works as described. It might be made more robust
like checking for dir existence (thinking of older instances upgrades).
But it certainly belongs to another bug report.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
As Tomas said, it would be better to alert the user if the backupdir tag
does not exist (or contains a nonexistent directory) in the config file.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
If koha-common is started when Zebra log files are owned by root
it will fail to start without any useful message (since Zebra can't
write errors in log files because it lacks permissions to do so).
This patch creates empty log files and ensure they have correct
permissions.
I can't pin-point why log files gets owned root, but I suspect it
has something to do with Zebra crashing and logrotate, but this is
just theory. We have seen this behaviour since koha 3.1 every
few months, and every time it happends we have root owned logs and
crashed Zebra so this patch will at least help sites which have
some kind of automatic koha-common start if it's not running.
Signed-off-by: Robin Sheat <robin@catalyst.net.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
As configuration variables from koha-sites.conf overwrite the ones in the
koha-create script we need to unset them in case we have USE_MEMCACHED="no".
Sponsored-by: Universidad Nacional de Cordoba
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Robin Sheat <robin@catalyst.net.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch makes the koha-create script adjust the koha-conf.xml file
with the proper string substitutions to enable the use of memcached
for the created Koha instance.
It adds three option switches that control this:
--use-memcached (defaults to "no")
--memcached-servers "host1:port1,..." (defaults to '127.0.0.1:11211')
--memcached-prefix "desired_namespace prefix" (defaults to 'koha_')
It respects the current schema configuration schema, where configuration
values are pondered like this:
hardcoded < koha-sites.conf < koha-create option switches
koha-sites.conf is read for USE_MEMCACHED, MEMCACHED_SERVERS and
MEMCACHED_PREFIX.
Note: the docs discourage setting user's own namespace prefix.
Using memcached is off as the default. The relevant configuration
variables will remain empty if the user doesn't pass --use-memcached
to the command. It matches the current behaviour.
To test:
- Apply the patch
- Build your own packages and install them on a test server
a) Create a new instance without using the new switches like:
$ koha-create --create-db memctest
- Check that /etc/koha/sites/memctest/koha-conf.xml contains:
* Empty <memcached_servers> tag.
* Empty <memcached_namespace> tag.
b) Play with the possible combination of option switches
(Note that the code defaults to empty and will remain like that if
--use-memcached is not used, so less tests...)
$ koha-create --create-db --use-memcached memctest
$ koha-create --create-db --use-memcached --memcached-servers "anything:xxx" memctest
$ koha-create --create-db --use-memcached --memcached-servers "anything:xxx" --memcached-prefix "something" memctest
$ koha-create --create-db --use-memcached --memcached-prefix "something" memctest
- Check the koha-conf.xml and /etc/apache2/sites-enabled/memctest
file reflect the chosen options.
c) Run
$ koha-create --help
- It should advertise this addition accordingly.
d) Run
$ man koha-create
- Man page for koha-create should provide good information on the new
switches behaviour
Sponsored-by: Universidad Nacional de Cordoba
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Robin Sheat <robin@catalyst.net.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Just added those switches.
Sponsored-by: Universidad Nacional de Cordoba
Signed-off-by: Magnus Enger <magnus@enger.priv.no>
I applied the patch on my local dev install, and then copied the
patched koha-list script to a couple of servers with actual
instances running off the packages, to test the script.
- It seems that the -h switch did not work before this patch, now
both -h and --help works nicely
- --sip and --nosip work as expected, also in combination with
--email and --noemail
The patch does not add --sip and --nosip to the man page for
koha-list, but I will do a followup for that.
Signed-off-by: Robin Sheat <robin@catalyst.net.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch makes the koha-create script install the file zebra-biblios-dom.cfg
with the proper string substitutions inside on the new instance koha-conf.xml file.
It also adds two option switches that control the indexing mode for the instance:
--biblio-idx {dom|grs1}
--auth-idx {dom|grs1}
DOM indexing is set as the default for both authorities and bibliographic records.
Following drojf (thanks!) advice I arranged stuff like explained here:
http://wiki.koha-community.org/wiki/Switching_to_dom_indexing
To test:
- Apply the patch
- Build your own packages and install them on a test server
a) Create a new instance without using the new switches like:
$ koha-create --create-db domtest
- Check there's a file /etc/koha/sites/domtest/zebra-biblios-dom.cfg
- Check that /etc/koha/sites/domtest/koha-conf.xml points to:
* zebra-biblios-dom.cfg (biblioserver section)
* zebra-biblios-dom.cfg (publicserver section)
* zebra-authorities-dom.cfg (authorityserver section)
- Success means the new default is DOM
b) Play with the 4 possible combination of option switches
$ koha-create --create-db --auth-idx grs1 --biblio-idx grs1 domtest
$ koha-create --create-db --auth-idx grs1 --biblio-idx dom domtest
$ koha-create --create-db --auth-idx dom --biblio-idx grs1 domtest
$ koha-create --create-db --auth-idx dom --biblio-idx dom domtest
- Check the koha-conf.xml file reflects the chosen options.
c) Run
$ koha-create --help
- It should advertise this addition accordingly.
d) Run
$ man koha-create
- Man page for koha-create should provide good information on the new switches behaviour
Sponsored-by: Universidad Nacional de Cordoba
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch add the option to choose 'ru' and 'uk' during install for Zebra.
Should work for a tarball install, and make 'ru' and 'uk' available for using
with koha-create too.
Sponsored-by: Universidad Nacional de Córdoba
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Reran Makefile.pl and made sure the language options show up now.
Patch extends existing language code lists addings nb, ru and uk
where missing.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch provides a definition file for Spanish (es) character
sorting in Zebra. It is based on the ideas from Hugo Agud <hagud@orex.es>
and Pablo Bianchi <pablo.bianchi@gmail.com>.
Makefile.PL is fixed to notice the existence of the 'es' language. The
docs for koha-create are touched too.
To test:
Tarball
=======
- Go through the install process, choosing 'es' for the Zebra's language step
- Koha should work as usual.
- Running this should show the lang definition is properly set.
$ grep -R "lang_defs/es" /etc/koha/*
(stuff like zebradb/zebra-biblios-dom.cfg:profilePath:...etc/koha/zebra/lang_defs/es... should show)
- This file should be present:
/etc/koha/zebradb/lang_defs/es/sort-string-utf.chr
Packages
========
- Build your own package, it shouldn't break the packaging
- Try the new package, using koha-create to set an instance using --lang 'es'
Sponsored-by: Universidad Nacional de Córdoba
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This adds a -q option to koha-rebuild-zebra that prevents it outputting
help if no instances are provided on the command line. This means that
if you've just installed the package, you won't get messages from cron
telling you how to use the script.
Test plan:
* install koha-common 3.12 or master onto a system with no enabled
instances.
* note that you or the sysadmin will start getting emails every 5
minutes.
* replace /etc/cron.d/koha-common and /usr/sbin/koha-rebuild-zebra with
the versions from this patch.
* note that the emails stop flowing.
Signed-off-by: Magnus Enger <magnus@enger.priv.no>
"sudo koha-rebuild-zebra -q" gives no output, as expected.
Followed the test plan, all looks good.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
1) koha-create: fill in __PLUGINS_DIR__
2) koha-create-dirs: create the directory, set permissions (writeable by the koha user)
Sponsored-by: Universidad Nacional de Córdoba
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Robin Sheat <robin@catalyst.net.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Commented out the code that checks for intance name parameters on the zebra service handling scripts.
It restores the original behaviour, while leaving error checking code.
Regards
To+
Sponsored-by: Universidad Nacional de Córdoba
Signed-off-by: Robin Sheat <robin@catalyst.net.nz>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This patch adds that (--disabled) option switch, Also revisits some of the code and docs.
To test:
- Apply the patch and create new packages (you might just drop the koha-list command somewhere)
- Create several instances (koha-create)
- Randomly set some as disabled, others enabled and enable email on some.
- Test all possible option switches combinations
Expected results:
- koha-list should abort with a proper message if mutually exclusive options selected (--email vs. --noemail, --enabled vs. --disabled)
- koha-list should show the exact instances you asked for
Regards
To+
P.S.: I wanted to add the --disabled option switch for the tab-completion work I'm doing, but as of bug 4876 I thought it would be ok to revisit the script to make it robust and clear.
Sponsored-by: Universidad Nacional de Córdoba
Signed-off-by: Robin Sheat <robin@catalyst.net.nz>
Does what it says, and cleans up the script at the same time.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
koha-stop-zebra now
- Checks the instance exists.
- Checks the instance is enabled.
- Checks if the zebra daemon is already running.
Regards
To+
Edit: Corrected the die message
Sponsored-by: Universidad Nacional de Córdoba
Signed-off-by: Robin Sheat <robin@catalyst.net.nz>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
koha-email-enable now
- Checks the instance exists.
- Checks if email is already enabled.
Regards
To+
Sponsored-by: Universidad Nacional de Córdoba
Signed-off-by: Robin Sheat <robin@catalyst.net.nz>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This patch makes koha-rebuild-zebra:
- Check for the existence of the instance
- Handle arbitrary amount of instance parameters
- Capture -a and -b (which made the script rebuild twice the chosen DB). It adds the extended version (--authorities and --biblios respectively) of the option switch. This makes the -a and -b switches work as "only do authorities" (or viceversa). They can be used concurrently, which is the default behaviour when no switch is provided.
- Handle -v (and --verbose) as koha-rebuild-zebra options, to ease the use for non-techie users.
- The rebuild_zebra.pl is wrapped inside an IF to return error values if we ever make rebuild_zebra.pl return error codes (this is pointed in the code).
- Added -h/--help switches and an 'usage' output :-D Please provide patches for any wording issues, or contact me to fix it.
To test:
- Apply the patch and create your packages (or just use the script from your branch)
- Run it in this scenarios / options
- -h/--help to see the available option switches
- Mix them with one or more instances, of which some could be fake
- try -a/--authorities and -b/--biblios in all possible combinations
- try -v/--verbose works
Regards
To+
Sponsored-by: Universidad Nacional de Córdoba
Signed-off-by: Robin Sheat <robin@catalyst.net.nz>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
koha-email-disable now
- Checks the instance exists.
- Checks if email is already disabled.
Regards
To+
Sponsored-by: Universidad Nacional de Córdoba
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Mason James <mtj@kohaaloha.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This adds commands required to control the SIP server. These commands
are:
* koha-enable-sip - copies the SIP config to the sites directory
* koha-start-sip - starts the SIP server processes
* koha-stop-sip - stops the SIP server processes
It also calls these as appropriate from the koha-common init script.
To use:
1) sudo koha-enable-sip instancename
2) sudo vim /etc/koha/sites/instancename/SIPconfig.xml
Do whatever is needed for your site's SIP configuration
3) sudo koha-start-sip instancename
To test:
1) Build packages with this patch
2) Ensure that sudo koha-start-sip instancename doesn't do anything
3) Run sudo koha-enable-sip instancename
4) Edit /etc/koha/sites/instancename/SIPconfig.xml if needed (probably
not required for testing)
5) Run sudo koha-start-sip instancename
6) Note that the sip processes are now running
7) Run sudo koha-stop-sip instancename
8) Note that the sip processes have gone
9) Reboot your Koha server
10) Note that the sip processes are back
Sponsored-By: Waitaki District Council Libraries
Sponsored-By: South Taranaki District Council Libraries
Sponsored-By: Horowhenua District Council Libraries
Sponsored-By: Rangitikei District Council Libraries
Signed-off-by: Magnus Enger <magnus@enger.priv.no>
Works as advertised. koha-start-sip without a prior koha-enable-sip
does nothing. koha-enable-sip copies the SIP config file to the
instance directory. After koha-enable-sip, koha-start-sip and
koha-stop-sip works as expected. After a reboot, the SIP processes are
still running. I have not actually tested the SIP servers after they
have been started, but assume they work the same as always.
The man pages look good.
The new commands should also have been added to the man page for
koha-common. I'll do a followup for that.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Until we have solved the packaging of koha template translations, provide a command that manages the installed translations in a proper way.
To test, build a Debian package of current master+the patches from this bug :-D and try the many options running koha-translate --help provide.
The command itself can be grabbed from a git checkout with this patch applied to test the script's funcionality. If it (and its docs) fits the package building stuff, I'll test on monday when I can be back on my workstation.
Sponsored-by: Universidad Nacional de Córdoba
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Comment: Good adition. Work as described. No errors.
Copied to /usr/local/bin. No errors on install, update, remove, list and check.
Passed-QA-by: Mason James <mtj@kohaaloha.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
As Mason noted, there was an error on that line.
Sponsored-by: Universidad Nacional de Córdoba
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Mason James <mtj@kohaaloha.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
koha-enable now:
- checks for the existence of the instance before any other action on it.
- checks if the instance is already enabled before changing stuff in the config files.
- only reloads apache if it is needed!
- handles more than one instance name as parameter (the code was there, a check for the cardinality of the args prevented it from working).
- documents this behaviour change in the docs
- doesn't break if the provided (invalid) instance name is a prefix/suffix of a real one (added -x to the relevant grep command).
To test:
- Aplpy the patch, build your packages
- Run koha-enable on
- Non existent instance (try using a prefix or a suffix of an already created one too).
- Already enabled existent instance name.
- Disabled instance.
Regards
To+
Sponsored-by: Universidad Nacional de Córdoba
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Mason James <mtj@kohaaloha.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
As noted by Mason on bug 10101, the check was not working for zero arguments.
Sponsored-by: Universidad Nacional de Córdoba
Signed-off-by: Mason James <mtj@kohaaloha.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
koha-disable now:
- checks for the existence of the instance before any actions on it.
- checks if the instance is already disabled before touching anything (warns otherwise)
- only reloads apache if needed
- handles more than one instance name.
- changed the docs to acknowledge the previous item.
To test:
- Apply the patch, build your package
- Run koha-disable on
- Non existent instance (try names that are prefix and suffix of a valid one too please)
- Already disabled instance name.
- Enabled instance name.
It should work as expected and warn the user on the expected wrong cases.
Regards
To+
Sponsored-by: Universidad Nacional de Córdoba
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Mason James <mtj@kohaaloha.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
koha-start-zebra now
- Checks the instance exists.
- Checks the instance is enabled.
- Checks if the zebra daemon is already running.
Regards
To+
Sponsored-by: Universidad Nacional de Córdoba
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Mason James <mtj@kohaaloha.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
koha-restart-zebra now
- Checks the instance exists.
- Checks the instance is enabled.
- Checks if the zebra daemon is already running.
Regards
To+
Edit:
- changed some wording problems.
- fixed an error in parameter validation
Sponsored-by: Universidad Nacional de Córdoba
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Mason James <mtj@kohaaloha.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
