Add greek as lang definition in installer.
Developed in collaboration with Giannis Kourmoulis <ikourmou@lib.auth.gr>
Test plan :
- Install using "gr" in "Primary language for Zebra indexing"
- check gr is used in etc/zebradb/zebra-*.cfg
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch adds two parameters to the koha-create command:
--enable-sru: makes the koha-create script enabled the SRU server for
the created instance
--sru-port: lets the user specify a desired port for the SRU server
to listen at. It defaults to 7090
To test:
- Apply the patch on top of master
- Build your own package and install / can be tested just using the koha-create
command on a 3.16+ packages install
- Create an instance as usual (i.e. without --enable-sru and --sru-port)
=> SUCCESS: The instance is created, the publicserver sections are
both commented out. The first publicserver section has 7090 set as the
listening port.
- Create an instance as usual, passing --sru-port 456
=> SUCCESS: The instance is created, the port is set but the publicserver sections
are commented out
- Create an instance with --enable-sru (with and without --sru-port)
=> SUCCESS: Verify the instance is created as expected, with the SRU server enabled
(port 7090 if no --sru-port passed, the one we chose otherwise).
- Verify that the docs also talk about this new parameters addition.
- Sign off :-D
Regards
To+
Sponsored-by: Universidad Nacional de Cordoba
Signed-off-by: Jesse Maseto <jesse@bywatersolutions.com>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Robin Sheat <robin@catalyst.net.nz>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Short:
Launch an indexing daemon (rebuild_zebra.pl -daemon) process for each
enabled instance. Enabling/disabling the use of the indexer is handled
by global configuration variables in /etc/default/koha-common.
Also provides command line tools to manage the running indexer daemons
for your instances.
Long:
Using an indexing daemon avoids launching a new interpreter each time
the cron triggers the indexing, and also allows sub-minute incremental
reindexing, a requirement from our librarians.[1]
Using the indexer daemon could remain "experimental" until it gets more
testing; so is disabled by default initially. To enable the use of the
indexer the user has to tweak the /etc/default/koha-common config file.
Specifically the USE_INDEXER_DAEMON variable, which is clearly explained
in the file.
Frecquency defaults to 5 sec, and can be changed by tweaking the
/etc/default/koha-common config file too.
This patch uses rebuild_zebra.pl in daemon mode, but it is crafted to
allow changing the indexing daemon and passing specific option switches
it might need.
Regards
To+
[1] This is the .deb version of http://bugs.koha-community.org/bugzilla3/show_bug.cgi?id=8519
Sponsored-by: Universidad Nacional de Cordoba
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
As the way we need to reference Apache instance names has now changed
between 2.2 and 2.4, we need to try it out both ways to make sure we get
it right.
This also allows koha-create/koha-disable to try the .conf version of
the name if the first one doesn't work.
To test:
* Create an instance on an Apache 2.2 system with koha < 3.16
* Upgrade to 3.16 with this patch, saying 'yes' to the renaming question
** Make sure you don't see the warning: Warning: problem enabling $site
in Apache
* Do a 'service apache2 restart'
* Make sure you can still access the instance
* Make sure that /etc/apache2/sites-enabled/instance.conf exists as a link
to /etc/apache2/sites-available/instance.conf
* Check that koha-create and koha-remove behave like you'd expect.
Note:
* If you need to make debconf forget that it asked you the question
about renaming so that it'll do it again, then run:
echo "unregister koha-common/rename-apache-vhost-files" | sudo debconf-communicate koha-common
* 'debconf-show koha-common' will show you the current debconf
configuration.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
As asked by Robin, a bash lib of functions is introduced with the common
functions to be reused. Most of the scripts are modified (reduced) to
include this file and the repeated functions cleaned.
No noticeable change in behaviour should be noticed.
As I've been todl in #debian-mentors, it is used that files for inclusion
should be installed at the apps directory (i.e. /usr/share/koha/) so this
patch makes the install script put the file in the bin/ directory.
All koha-* scripts assume the file is there already (and fail otherwise).
Sponsored-by: Universidad Nacional de Cordoba
Signed-off-by: Robin Sheat <robin@catalyst.net.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Apache 2.4 expects the sites definition files use the sufix '.conf'
To reproduce:
- Install the 'koha-common' package on Debian 7 or Ubuntu 13.10+
(both known to include Apache 2.4).
- Create an instance (for example testlibrary) using the supplied
commands:
$ koha-create --create-db testlibrary
> FAIL: apache reports an error like this:
"ERROR: Site testlibrary does not exist!"
This patch adds a test on the Apache version and appends the ".conf"
sufix if needed.
To test:
1st step: koha-create gets fixed:
-- The hard way --
- Apply the patch, and build the koha-common package on top of this
commit.
- Install the built package on an Apache 2.4 Debian-based distro (Debian 7
or Ubuntu 13.10 will work)
- Create a test instance:
$ koha-create --create-db testlibrary
> SUCCESS: no more apache sites related error.
-- The easy way --
- Apply the patch, and copy the koha-create into an Apache 2.4
Debian-based distro
- Create a test instance using the koha-create script you just
copied:
$ ./koha-create --create-db testlibrary
> SUCCESS: no more apache sites related error.
2nd step: the rest of the touched scripts keep working as usual
koha-disable
koha-dump
koha-enable
koha-list
koha-remove
koha-restart-zebra
koha-stop-zebra
koha-start-zebra
They should all keep working. Can be tested "the easy way" too.
Note: there might be another issues regarding Apache 2.4 deployments
like the need for
$ a2enmod access_compat
and perhaps some directory permissions tweak, which I think should be
properly documented on the install instructions.
Sponsored-by: Universidad Nacional de Cordoba
Signed-off-by: Robin Sheat <robin@catalyst.net.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
While adding the --help and -h switches I forgot to change to arguments
count validation so that one can actually use those parameters (i.e.
koha-create should accept being invoked with only one parameter).
This patch just changes the minimum parateres required from 2 to 1.
To reproduce:
- Run 'koha-create --help' from master
=> Usage information is printed BUT ALSO an "Error: wrong parameters"
message
- Apply the patch and
- Run 'koha-create --help'
=> Usage informatio it printed and no error message.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch makes koha-create print better and more descriptive usage
information. Also adds the --help and -h switches.
Sponsored-by: Universidad Nacional de Cordoba
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Removed trailing " from:
$scriptname [db usage mode] [options] instancename"
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Koha requires mod_rewrite. If it's not enabled in Apache, then
koha-create will now abort with a helpful error message. Also adds a
warning when not run as root to avoid confusing errors.
Test plan:
* apply the patch
* a2dismod rewrite
* run koha-create without sudo, note the error about being root
* run koha-create with sudo, note the error about rewrite
* a2enmod rewrute
* repeat test above, note that it works
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Works as expected.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
As configuration variables from koha-sites.conf overwrite the ones in the
koha-create script we need to unset them in case we have USE_MEMCACHED="no".
Sponsored-by: Universidad Nacional de Cordoba
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Robin Sheat <robin@catalyst.net.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch makes the koha-create script adjust the koha-conf.xml file
with the proper string substitutions to enable the use of memcached
for the created Koha instance.
It adds three option switches that control this:
--use-memcached (defaults to "no")
--memcached-servers "host1:port1,..." (defaults to '127.0.0.1:11211')
--memcached-prefix "desired_namespace prefix" (defaults to 'koha_')
It respects the current schema configuration schema, where configuration
values are pondered like this:
hardcoded < koha-sites.conf < koha-create option switches
koha-sites.conf is read for USE_MEMCACHED, MEMCACHED_SERVERS and
MEMCACHED_PREFIX.
Note: the docs discourage setting user's own namespace prefix.
Using memcached is off as the default. The relevant configuration
variables will remain empty if the user doesn't pass --use-memcached
to the command. It matches the current behaviour.
To test:
- Apply the patch
- Build your own packages and install them on a test server
a) Create a new instance without using the new switches like:
$ koha-create --create-db memctest
- Check that /etc/koha/sites/memctest/koha-conf.xml contains:
* Empty <memcached_servers> tag.
* Empty <memcached_namespace> tag.
b) Play with the possible combination of option switches
(Note that the code defaults to empty and will remain like that if
--use-memcached is not used, so less tests...)
$ koha-create --create-db --use-memcached memctest
$ koha-create --create-db --use-memcached --memcached-servers "anything:xxx" memctest
$ koha-create --create-db --use-memcached --memcached-servers "anything:xxx" --memcached-prefix "something" memctest
$ koha-create --create-db --use-memcached --memcached-prefix "something" memctest
- Check the koha-conf.xml and /etc/apache2/sites-enabled/memctest
file reflect the chosen options.
c) Run
$ koha-create --help
- It should advertise this addition accordingly.
d) Run
$ man koha-create
- Man page for koha-create should provide good information on the new
switches behaviour
Sponsored-by: Universidad Nacional de Cordoba
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Robin Sheat <robin@catalyst.net.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch makes the koha-create script install the file zebra-biblios-dom.cfg
with the proper string substitutions inside on the new instance koha-conf.xml file.
It also adds two option switches that control the indexing mode for the instance:
--biblio-idx {dom|grs1}
--auth-idx {dom|grs1}
DOM indexing is set as the default for both authorities and bibliographic records.
Following drojf (thanks!) advice I arranged stuff like explained here:
http://wiki.koha-community.org/wiki/Switching_to_dom_indexing
To test:
- Apply the patch
- Build your own packages and install them on a test server
a) Create a new instance without using the new switches like:
$ koha-create --create-db domtest
- Check there's a file /etc/koha/sites/domtest/zebra-biblios-dom.cfg
- Check that /etc/koha/sites/domtest/koha-conf.xml points to:
* zebra-biblios-dom.cfg (biblioserver section)
* zebra-biblios-dom.cfg (publicserver section)
* zebra-authorities-dom.cfg (authorityserver section)
- Success means the new default is DOM
b) Play with the 4 possible combination of option switches
$ koha-create --create-db --auth-idx grs1 --biblio-idx grs1 domtest
$ koha-create --create-db --auth-idx grs1 --biblio-idx dom domtest
$ koha-create --create-db --auth-idx dom --biblio-idx grs1 domtest
$ koha-create --create-db --auth-idx dom --biblio-idx dom domtest
- Check the koha-conf.xml file reflects the chosen options.
c) Run
$ koha-create --help
- It should advertise this addition accordingly.
d) Run
$ man koha-create
- Man page for koha-create should provide good information on the new switches behaviour
Sponsored-by: Universidad Nacional de Cordoba
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch add the option to choose 'ru' and 'uk' during install for Zebra.
Should work for a tarball install, and make 'ru' and 'uk' available for using
with koha-create too.
Sponsored-by: Universidad Nacional de Córdoba
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Reran Makefile.pl and made sure the language options show up now.
Patch extends existing language code lists addings nb, ru and uk
where missing.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch provides a definition file for Spanish (es) character
sorting in Zebra. It is based on the ideas from Hugo Agud <hagud@orex.es>
and Pablo Bianchi <pablo.bianchi@gmail.com>.
Makefile.PL is fixed to notice the existence of the 'es' language. The
docs for koha-create are touched too.
To test:
Tarball
=======
- Go through the install process, choosing 'es' for the Zebra's language step
- Koha should work as usual.
- Running this should show the lang definition is properly set.
$ grep -R "lang_defs/es" /etc/koha/*
(stuff like zebradb/zebra-biblios-dom.cfg:profilePath:...etc/koha/zebra/lang_defs/es... should show)
- This file should be present:
/etc/koha/zebradb/lang_defs/es/sort-string-utf.chr
Packages
========
- Build your own package, it shouldn't break the packaging
- Try the new package, using koha-create to set an instance using --lang 'es'
Sponsored-by: Universidad Nacional de Córdoba
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
1) koha-create: fill in __PLUGINS_DIR__
2) koha-create-dirs: create the directory, set permissions (writeable by the koha user)
Sponsored-by: Universidad Nacional de Córdoba
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Robin Sheat <robin@catalyst.net.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This changes the scripts so that:
- in koha-create, the zebra password and mysql passwords are set to 16 character "secure" passwords, ie generated with pwgen -s 16 1
- the patron password is set to a 12 character "memorable" password.
Signed-off-by: Magnus Enger <magnus@enger.priv.no>
Looks good. I did not actually build, install and test new packages,
but i did test pwgen with the new arguments and the changes make
sense.
Signed-off-by: Robin Sheat <robin@catalyst.net.nz>
QA signoff
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Signed-off-by: Robin Sheat <robin@catalyst.net.nz>
Passed-QA-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
The newer version of MySQL in Ubuntu 12.04 installs a default
'localhost' user with no username. Due to the way that MySQL looks up
user details when you connect, if you connect from localhost and the
user was only created with a wildcard host (%), the anonymous localhost
user will be found instead. This means that your username is lost for
the connection, and you have no privileges.
This patch creates a second user with a hostname of 'localhost'. This
will not work if your database is on a remote server, but you probably
know what you are doing if that's the case. Patches to determine this
server's name relative to the MySQL server are welcome (or even ideas on
how to do it.)
It also fixes up a couple of other small things:
* make koha-remove stop zebra properly
* stop the warning that the password file is missing on create
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Works as promised.
This commit makes koha-create more flexible by adding a number of command-line
and configuration options.
The biggest change is to add support for pre-determined MySQL credentials using
a file in /etc/koha/passwd (for security reasons, if you use this feature, make
sure the file is not world-readable). The configuration file has the following
format:
instance:user:password:database
The database is optional, but the other two are both required if you want to
specify MySQL credentials. If no credentials are specified for a given instance,
the standard koha_instance username and an auto-generated password are used.
The following additional command line options are now available:
* --use-db - use a pre-existing database, see also --database
* --database - specify the name of the mysql database (still defaults to
koha_instance)
* --passwdfile - specify a custom (Koha) passwd file for MySQL credentials
The following additional variables are now available (for use in
koha-sites.conf or a custom config file):
* OPACPORT (previously added but not documented) - port on which the OPAC
should be served
* OPACPREFIX - prefix for the OPAC's virtual host
* OPACSUFFIX - suffix for the OPAC's virtual host
This commit also adds the --keep-mysql option to koha-remove, which, if
specified, will prevent koha-remove from deleting the database or MySQL user
when removing an instance.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
This does two things:
* Allows OPACPORT to be specified to change the default OPAC port,
* removes the port number from the ServerName directive, as it's already
handled by the VirtualHost declaration.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
The revised patch quotes the variable $mysqldb, as suggested by Frère
Sébastien Marie.
This patch makes sure that pointing DEFAULTSQL in /etc/koha/koha-sites.conf
to any (gzip'ed) file produced by mysqldump works, by adding the name of the
database to the end of the call to mysql, when the specified SQL file is
loaded. Files produced with koha-dump-defaults should still work too.
To test:
- Apply the patch
- Create a new package with build-git-snapshot
- Install the package
- Create an SQL file from an existing installation with mysqldump
- gzip the SQL file
- point DEFAULTSQL to the file in /etc/koha/koha-sites.conf
- create a new site with koha-create --create-db
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Sets the default borrowernumber of staff user to 1 and makes it possible
to override this with ADMINUSER in /etc/koha/koha-sites.conf or with the
--adminuser and -a command line options.
Remember to update the wiki if this gets pushed!
Signed-off-by: Robin Sheat <robin@catalyst.net.nz>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
koha-create would fail to check that --configfile was set on the
commandline, before either including it if it existed or dying if
it did not. This patch should make sure the existence of a
configfile is only tested if --config is set.
Signed-off-by: Robin Sheat <robin@catalyst.net.nz>
This should apply against 3.4 and master.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
This allows the database details (username and database name in
particular) to be modified in between a koha-create --request-db and
--populate-db. Most useful when you discover that the username is too
long or something. Now, when populating the database, the connection
information is reloaded from the koha-conf.xml rather than being
generated from the instance name.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Order of precedence for config options, from lowest to highest:
1. The defaults set in koha-create itself
2. /etc/koha/koha-sites.conf
3. Config file specified with --configfile
4. Individual options set with --marcflavor, --zebralang, --defaultsql
Signed-off-by: Robin Sheat <robin@catalyst.net.nz>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
This will override the setting in /etc/koha/koha-sites.conf.
Signed-off-by: Robin Sheat <robin@catalyst.net.nz>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
This adds the --marcflavor and --zebralang commandline options, as
well as short versions of all options.
Signed-off-by: Robin Sheat <robin@catalyst.net.nz>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
By default the packages now set up the cron jobs to handle things like
overdues and email etc. By default, email is off, 'koha-email-enable'
and 'koha-email-disable' can manage this.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Galen Charlton <gmcharlt@gmail.com>
This prevents it leaving files lying around in /tmp
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Galen Charlton <gmcharlt@gmail.com>
This way, the various cron jobs will not try to do things to it.
They can't, since it is not yet really created.
Signed-off-by: Galen Charlton <gmcharlt@gmail.com>
This is necessary if we do not have access to DB server with sufficient
permissions. The DB server is used for other things, that may well be
the case.
Signed-off-by: Galen Charlton <gmcharlt@gmail.com>
koha-common.postinst now creates a symlink to the Debian one.
The sysadmin may replace that manually with something that allows
Koha to access a remote mysql server.
Signed-off-by: Galen Charlton <gmcharlt@gmail.com>
