Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Agustín Moyano <agustinmoyano@theke.io>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Test plan:
Use installer and onboaarding tool, make sure the js and css files are
loaded
Signed-off-by: Hayley Mapley <hayleymapley@catalyst.net.nz>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Test plan:
prove t/db_dependent/Koha/Template/Plugin/Asset.t
Signed-off-by: Hayley Mapley <hayleymapley@catalyst.net.nz>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Test plan:
Apply the patch a try to use Koha, css and js files should be used
normally
Signed-off-by: Hayley Mapley <hayleymapley@catalyst.net.nz>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
To test:
1. Create a course reserve or go on an existing one
2. Add items and add a change for the holdingbranch
3. On the list of items in this course reserve
(course_reserves/course-details.pl?course_id=xx), click on "edit" at the
end of a row :
Without the patch, you can't see the holdingbranch you have choose for
this item, but you see "LEAVE UNCHANGED"
With the patch, you can see the holdingbranch you have choose when
adding this item in the course
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Mikaël Olangcay Brisebois <mikael.olangcay-brisebois@inLibro.com>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
To test:
1) Apply patch.
2) Check that there is no changed behavior with buttons or checkboxes.
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This addresses most of the transfer dialogs. There are some dialogs
that I have not converted because I don't know what triggers them,
therefore I cannot test them.
The following scenarios have been addresses, and should be tested:
FOR TRANSFERS
1) Checkin with no issue, hold or transfer; not at home (AutomaticItemReturn set to Don't)
* Should give 3 options - Yes, Yes with print, or No.
* Yes and Yes with print should trigger a transfer back home.
* No should do nothing.
* Print should open a window for printing, with correct
information.
* All three options should close the modal.
TO TEST:
1) Set AutomaticItemREturn to Don't.
2) Check in an item with no issues, holds or transfers set, at a
location other than the owning library.
3) Test conditions above.
2) Checkin with no issue, hold or transfer; not at home (AutomaticItemReturn set to Do)
* Should give 2 options - Print or OK.
* Should automatically set transfer.
* Print should open a window for printing, with correct information.
* Both buttons should close modal.
TO TEST:
1) Set AutomaticItemReturn to Do.
2) Check in an item with no issues, holds or transfers set, at a
location other than the owning library.
3) Test conditions above.
3) Checkin with no issues or holds, but transfer already set
* Should give 3 options - OK, Print or Cancel.
* OK and print should not touch existing transfer.
* Cancel should remove the exisiting transfer.
* Print should open a window for printing, with correct information.
* All three options should close the modal.
TO TEST:
1) Check in an item following step 2 of either test above.
2) Check in item again, while a transfer exists.
3) Test conditions above.
WRONG BRANCH
4) If AllowReturnToBranch is not set "to any library", and the item is not checked in at the appropriate branch, the wrong-branch-modal pops up:
* Should give 1 option - OK.
* Should not check anything in or initiate a transfer.
* OK should close the modal.
TO TEST:
1) Set AllowReturnToBranch to "only the library the item is from".
You can test the other settings, as long as you pay attention to
where you are checking the item in at.
2) Check in an item at a branch other than the owning library.
3) Test conditions above.
Signed-off-by: Lisette <lisetteslatah@gmail.com>
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
To Test:
1) Place a hold on an item for pickup at another branch.
2) Check in item to trigger hold and transfer.
3) Check in item again without changing location. Note modal AND old
dialog behind modal.
4) Apply patch.
5) Check in item again without changing location. Note modal without
the old dialog.
Signed-off-by: Lisette <lisetteslatah@gmail.com>
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
1) Replaced comparison with string to make testing branch easier.
2) Replaced useless 0 values with undef.
Does not change any behavior, only simplifies code.
Signed-off-by: Lisette <lisetteslatah@gmail.com>
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch makes the OPAC pages that rely on OpacPasswordChange use the
current patron's category to make the decision to allow password change
or not.
It does so by making sure all the places in which OpacPasswordChange was
used, use $logged_in_user->category->effective_change_password instead.
Special attention is required on the case of opac-registration-verify.pl
in which the use of an unblessed Koha::Patron object is changed in
favour of the blessed object, so we can actually use the new method to
make a decision on the text to display.
To test:
- Go through the OPAC pages, check that the password change strings and
links are displayed only whne appropriate.
- Sign off :-D
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch makes the staff interface handle the new flag when editing
the categories. I didn't add the flag to the list of categories table
because it makes it too big, but can be easily added if required by
users or QA.
To test:
- Along with other patches from this bug, edit patron categories
=> SUCCESS: Notice the changes are correctly stored
- Sign off :-D
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This method checks whether the local $self->change_password is set to
override the OpacPasswordChange syspref (i.e. if it is set to a
bool) or undef, in which case it falls back to the value of the syspref
To test:
- Apply this patches
- Make sure the DB is updated:
$ updatedatabase
- Update the schema files:
$ dbic
- Run:
$ kshell
k$ prove t/db_dependent/Koha/Patron/Category.t
=> SUCCESS: Tests pass!
- Sign off :-D
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
When possible it's a good idea to use `any` from List::Util to shortcut
on the first occurence of a truthy value.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch makes the templates relying on the OpacResetPassword syspref
use the introduced TT plugin method instead by changing:
[% IF Koha.Preference('OpacResetPassword') %]
=>
[% IF Categories.can_any_reset_password %]
To test:
- Verify that all the places in which the 'forgot password' link is
displayed in OPAC keep working, provided there's at least one category
that has the flag set
- Attempt to recover the password for a patron that belong to a valid
category (i.e. that has the flag set)
=> SUCCESS: You can go through the normal process
- Attempt to recover the password for a patron that belongs to a
category with the flag unset.
=> SUCCESS: Once Koha identifies your category, you are told you are not
allowed to do it
- Sign off :-D
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch introduces a method to the Koha::Template::Plugin::Categories
TT plugin. This methods queries for categories filtering them by
effective_reset_password flag set, and returns a boolean representing the fact
that there's at least one category allowed.
To test:
- Apply this patch
- Run:
$ kshell
k$ prove t/db_dependent/Template/Plugin/Categories.t
=> SUCCESS: Tests pass!
- Sign off :-D
Caveat: this patch/tests require the schema to be updated
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This method checks wether the local $self->reset_password is set to
override the OpacResetPassword syspref (i.e. if it is set to a bool) or
undef, in which case if falls back to the value of the syspref.
To test:
- Apply this patches
- Make sure the DB is updated:
$ updatedatabase
- Update the schema files:
$ dbic
- Run:
$ kshell
k$ prove t/db_dependent/Koha/Patron/Category.t
=> SUCCESS: Tests pass!
- Sign off :-D
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch makes the staff interface handle the new flag when editing
the categories. I didn't add the flag to the list of categories table
because it makes it too big, but can be easily added if required by
users or QA.
To test:
- Along with other patches from this bug, edit patron categories
=> SUCCESS: Notice the changes are correctly stored
- Sign off :-D
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch adds a new column to the categories table:
'reset_password' which is a boolean, and represents, well... that. The
value itself is nullable.
The idea is that OpacResetPassword governs the general behaviour, and
this can be overriden at category-level.
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch adds CodeMirror syntax highlighting by default to JS and CSS
system preferences. HTML preferences will use CodeMirror editors if
UseWYSIWYGinSystemPreferences is disabled.
Three new CodeMirror files are added to support three new syntax
highlighting modes: XML (for HTML), CSS, and JS.
A new option is added to *.pref file configurations for textareas which
are intended for HTML, JS, or CSS: syntax. This option is passed to the
CodeMirror configuration to control syntax highlighting mode.
Textareas without a syntax option specified will not have CodeMirror
enabled.
To test, apply the patch and go to Administration -> System preferences.
Test the behavior of several preferences which use <textarea> as their
input. For example:
- OPACUserJS (JS)
- IntranetUserCSS (CSS)
- OpacHeader (HTML)
- BibtexExportAdditionalFields (no highlighting)
Text entry in each of these should have the correct syntax highlighting
applied to them. All data should be saved correctly.
Test with UseWYSIWYGinSystemPreferences both on and off.
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Many SMS messaging services reject numbers that do not conform to the E.164 international public telecommunication
numbering plan.
We already tell patrons on the OPAC "Please enter numbers only. (123) 456-7890 would be entered as 1234567890."
but we do not enforce this. We should be validating the patron's SMS number on both the staff side and the patron
self-service for updating the SMS number.
Test plan:
1) Apply this patch
2) Enable SMS message ( you can set to Email to enable )
3) Test entering and updating SMS numbers on the OPAC and staff
interfaces.
4) Note you can only enter a 1 to 14 digit number with an optional + sign
at the beginning ( used to indicate the number includes a country calling code )
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch removes trailing spaces and replaces tab characters with
spaces in the branch transfer limits template.
Mentored-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Currently PF is only ever used for lost item processing fees. This patch
alters the end user faceing description to clarify that.
Note: It may be nice to make the code more descriptive too at some
point, but that can happen in another bug in my opinion.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Hayley Mapley <hayleymapley@catalyst.net.nz>
Test plan passes.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch removes the hardcoded untranslatable string
'Lost item' from C4/Circulation.pm.
To test:
1) Make sure the system preference WhenLostChargeReplacementFee is set to Charge
2) Optional: in Administration > Item types, add a default replacement cost to
the item type you plan to use
3) Loan an item out to a patron
(If there is no default replacement cost, make sure the item has a replacement
price)
4) In the patron's account > Details > Loans, click on the item's barcode
5) Set the lost status to Lost
6) Go back to the patron's account > Fines
7) Notice it is written 'Lost item , Lost item title barcode (title)'
8) If you have another language installed, switch to the other language
and notice the second Lost item is still in English
9) Apply the patch
10) Redo steps 3-6
11) Notice it is written 'Lost item, title barcode (title)'
12) Optional: switch to another language, notice there is no English string
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Test plan
1/ Set an item with some xml data in more_subfields_xml
2/ Issue this item to a borrower
3/ Query the webservice with GetPatronInfo methods and show_loans=1 params
4/ Check no <more_subfields_xml> tags are returned in the xml response from the webservice
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
- Removes some doubled up entries
- Fixes some whitespace issues
- Adds some missing entries, for example:
007, nonprojected graphic, secondary support material a-c
To test:
- Verify that the 007 cataloging plugin works correctly and
matches standard:
http://www.loc.gov/marc/bibliographic/bd007k.html
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
To test:
1 - Enable AuthoSelfCheck prefs
2 - In opacuserjs or scouserjs add a fetch of an unreachable resources
3 - Visit the SCO
4 - Sign in as a patron then click 'finish'
5 - Say 'yes' to receipt
6 - Note you are directed to log in
7 - Apply patch
8 - Restart all the things
9 - Repeat 4 & 5
10 - Sucess, receipt prints
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch adds the VOID and FFOR codes to the releveant templates for
display purposes
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch adds a database update which will update any blank values of
the XSLTDetailsDisplay system preference to "default." Although a blank
value will still result in the default XSLT view, it's more consistent
with the other XSLT preferences to use "default."
To test, apply the patch and set the XSLTDetailsDisplay to a blank
value. Run the database update. The value of the XSLTDetailsDisplay
system preference should now be "default."
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch removes the non-XSLT markup from the bibliographic detail
page in the staff client. The XSLTDetailsDisplay preference has
been altered to accommodate this change. A blank value in
XSLTDetailsDisplay will now be equivalent to "default."
To test, apply the patch and set the value of XSLTDetailsDisplay to
either blank or "default."
View the detail page for a bibliographic record in the staff client. The
XSLT view should be shown.
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Fixes another place where the public note is shown:
- Course reserves module start/summary page
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Test plan:
Same as initial test plan, except that when a hold has no status that
the Status column for that hold should be blank instead of saying
"Hold has been placed".
Sponsored-by: Catalyst IT
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
When a hold has been suspended or is waiting, the status
message appears in the Barcode column of the Holds table. This patch
fixes this by adding a separate Status column which details the status
of the Hold, whether it has been suspended, or is in transit, etc.
Test plan:
1) Place an item level hold and a 'Next Available' record level hold for
a patron.
2) View the holds in Patrons->Patron details for that Patron in the Check out and Details tabs
3) Suspend one of the holds, and note that the status appears in the
barcode column
4) Set a hold to be waiting for pickup, and note the status appears in
the barcode column
5) Apply the patch
6) Check the same holds and note that the statuses now appear in the new
column called Status, and note that if a hold has status effect that the
row reads "Hold has been placed"
7) Verify that this is the case in both the Holds tables (in Check out
tab and Details tab)
Sponsored-by: Catalyst IT
Signed-off-by: Jose-Mario Monteiro-Santos <jose-mario.monteiro-santos@inLibro.com>
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
