GetFrameworkCode was incorrectly spelt as GetFrameworkcode on line 401.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
We failed to deliver advance_notices because a template for sms's is undefined, because we don't support
sending sms' as advance_notice.
This crashed the cronjob because digests are set to die instead of the warn used in non-digest.
And we get angry customers asking for compensation!
This patch replaces the die with warn.
TEST PREPARATION:
0. Edit the ODUEDGST letter, find an undefined letter for any trasport type.
TEST PLAN:
1. Find a borrower and from the messaging preferences set the "Advance notice" transport type to
the undefined digest. Set the "Days in Advance" to 1.
2. Check-out something for that borrower and set the due date for tomorrow.
3. Run "misc/cronjobs/advance_notices.pl -c -n -v" from the terminal.
4. BEFORE THIS PATCH: You get an error
"No circulation PREDUEDGST letter transported by sms at /home/koha/kohaclone/C4/Letters.pm line 609."
and the script dies.
4. AFTER THIS PATCH: You get an error
"No circulation PREDUEDGST letter transported by sms at /home/koha/kohaclone/C4/Letters.pm line 609."
but the script keep on going!
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
An item can be marked as lost by longoverdue.pl, but left checked out to
the patron. In this case, the item will continue to accrue fines.
Test Plan:
1) Check out an item and back date it so it is overdue and should
generate fines.
2) Mark the item as lost by either using longoverdue.pl, or just
by setting itemlost to 1 by directly accessing the database
3) Run fines.pl
4) Note the overdue generated a fine
5) Repeat steps 1-2
6) Apply this patch
7) Run fines.pl
8) Note a fine was not generated
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
A tiny typo made in runreport.pl when updating it for bug 9530 lead to
no body being attached to html emails.
Signed-off-by: Chris <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
A dir creation was uncommented (by me), the effect is
create a lang dir on 'update', which is no needed.
To test:
1) Update translation files for a uninstalled language
(cd misc/translator; ./translate update xx-YY)
2) Check new dirs
koha-tmpl/opac-tmpl/bootstrap/xx-YY/
koha-tmpl/intranet-tmpl/prog/xx-YY/
koha-tmpl/intranet-tmpl/prog/en/modules/help/xx-YY/
3) Clean all
git clean -f -d
4) Apply the patch
5) Repeat 1) (i.e. update)
6) Check no new dirs this time
Signed-off-by: Frederic Demians <f.demians@tamil.fr>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Tested according to test plan, works as described.
Passes tests and QA script.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch should fix the issue when running under 'triggered' mode
To test:
1) Run overdue_notices.pl -t -n [to output notices to command
line]
2) Note that the notices output, list ALL checked out items
3) Apply Patch
4) Run again
5) Note the difference
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Amended patch: remove space changes.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This script is called by a cron job, but was never marked as executable,
so will error every time it's called, which is no good. This also adds
an appropriate #! line to the top of the file.
To test:
* apply the patch
* make a package
* ensure that the installed
/usr/share/koha/bin/cronjobs/automatic_renewals.pl
is mode 755 and does something when run.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Kurdish translation files use a variant of Arabic script,
they need to be displayed as RTL.
Currently that is inferred from language dir name after
translation, and that name use the language tag, so we
need to change it from 'ku' to 'ku-Arab'
To test:
1) Translate to Kurdish
(cd misc translator; ./translate install ku)
2) Enable Kurdish on opac/staff
3) Test staff/opac interface, they are displayed as LTR
which is wrong
4) Disable Kurdish language
5) Do a cleanup (git clean -f -d)
5) Apply the patch
6) Translate again
(cd misc translator; ./translate install ku-Arab)
7) Enable again
8) Test again, this time display is correct (LTR)
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Easy to test. Well spotted Bernardo.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described.
The charge with the replacement price will only be made if the charge
parameter matches the lost value. The given example is faulty (as well
as some of the code, as it appears ;)
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Patch to follow that adds 3 new system preferences to control the
parameters for the longoverdue script.
New prefs are DefaultLongOverdueChargeValue, DefaultLongOverdueLostValue
and DefaultLongOverdueDays.
These preferences are used when you call the longoverdue.pl script without
their parameters.
Sponsored-By: CCSR
Signed-off-by: Leila and Fridos help <koha.aixmarseille@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Patch removes outdated translation tool documentation
from the misc/translator directory.
Signed-off-by: Magnus Enger <digitalutvikling@gmail.com>
Removing these lines sounds like a good idea. I tested by
applying the patch and checking that the files in question
are gone.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
1) Be more careful when checking the NorwegianPatronDBEnable syspref.
Before:
if ( C4::Context->preference('NorwegianPatronDBEnable') == 1 ) {
After:
if ( C4::Context->preference('NorwegianPatronDBEnable') && C4::Context->preference('NorwegianPatronDBEnable') == 1 ) {
This should avoid complaints if the syspref is not initialized.
2) Fix some empty =head2 POD sections
3) Fix some indentation in patrons.pref, to make xt/yaml_valid.t happy
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
I couldn't find any regressions with adding, editing and deleting members.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch makes it possible to sync patron data between Koha and the
Norwegian national patron database, in both directions.
In order to use this, the following information is necessary:
- a username/password from the Norwegian national database of libraries
("Base Bibliotek"), available to all Norwegian libraries
- a special key in order to decrypt and encrypt PIN-codes/passwords,
which is only available to Norwegian library system vendors
- a norwegian library vendor username/password
See http://www.lanekortet.no/ for more information (in Norwegian).
While this is of course an implementation of a specific synchronization scheme
for borrower data, attempts have been made to prepare the ground for other sync
schemes that might be implemented later. Especially the structure of the new
borrower_sync table might be reviewed with an eye to how it might fit other
schemes.
To test:
Since the password and cryptographic key needed to use this functionality
is only available to Norwegian library system vendors, only regression testing
can be done on the submitted code. Suggested things to check:
- Apply the patch and make sure the database update is done. This should add
the new "borrower_sync" table and five new systmpreferences under the
"Patrons" > "Norwegian patron database" category:
- NorwegianPatronDBEnable
- NorwegianPatronDBEndpoint
- NorwegianPatronDBUsername
- NorwegianPatronDBPassword
- NorwegianPatronDBSearchNLAfterLocalHit
- Check that patrons can be created, edited and deleted as usual, when
NorwegianPatronDBEnable is set to "Disable"
- Check that the new tests in t/NorwegianPatronDB.pm run ok, e.g. on a
gitified setup:
$ sudo koha-shell -c "PERL5LIB=/path/to/kohaclone prove -v t/NorwegianPatronDB.t" instancename
- Check that all the other tests still run ok
- Check that the POD in the new files itroduced by this patch looks ok:
- Koha/NorwegianPatronDB.pm
- members/nl-search.pl
- misc/cronjobs/nl-sync-from-koha.pl
- misc/cronjobs/nl-sync-to-koha.pl
- t/NorwegianPatronDB.t
Sponsored-by: Oslo Public Library
Update 2014-09-18:
- Rebase on master
- Split out changes to Koha::Schema
- Incorporate new way of authenticating with NL
Update 2014-10-21:
- Rebase on master
- Use Module::Load to load Koha::NorwegianPatronDB in non-NL-specific
scripts and modules
- Fix the version number of Digest::SHA
- Fix a missing semicolon in kohastructure.sql
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch
- rename _entity_clean as _clean_ampersand
- rename the script to sanitize_records.pl
- add a --fix-ampersand switch (the only one FOR NOW, enabled by
default) so it is obvious what the script does.
- make POD and usage reflect this changes.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch adds:
- a new maintenance script batch_sanitize_records
- a new subroutine C4::Charset::SanitizeRecord
- new unit tests for the new subroutine
Test plan:
1/ prove t/db_dependent/Charset.t
2/ Create a record containing "&amp;" (could be follow with as many
'amp;' as you want) in one of its fields and the same for the field
linked to biblioitems.url.
The url should not be sanitized, it may contain "&".
3/ Launch the maintenance script with the -h parameter to see how to use
it.
4/ Launch the script using the different parameters:
--filename=FILENAME
--biblionumbers='XXX'
--auto-search
The auto-search permits to sanitize all records containing "&amp;" in
the marcxml field.
Use the verbose flag for testing.
Without the --confirm flag, nothing is done.
5/ Use the --confirm flag and verify in the biblioitems.marcxml field
that the record has been sanitized.
6/ Try the --reindex flag to reindex records which have been modified.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Test plan (see Bug 6858 for using staticfine.pl) :
For a user (of a given category and library) with several overdues, launch the script :
staticfines.pl --category CAT,AMOUNT --library LIB --delay DELAY
Then, check that the user has been charged of AMOUNT if the due date of the most late item plus the delay is *before* today.
One day later, re-execute the script with the same parameters and check that the fine has not been charged twice.
Without patch, the fine is charged twice, with patch the user already charged is skipped (see output in debug mode)
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Without the patch, the fine will be applied every time the script is run.
With the patch the fine will only be applied once.
Passes tests and QA script.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Formatting :
perltidy
use q{} for SQL queries
add use Modern::Perl
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Remove unused $query var
Correct redefined $count var
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch adds to the database cleanup script an option to purge expired patron restrictions (debarments in code).
Test plan :
- Select a borrower
- Create a restriction with expiration date in the futur
- Create a restriction expired since 7 days
- Create a restriction expired since 14 days
- run "misc/cronjobs/cleanup_database.pl -v --restrictions 14"
=> no restriction is removed for this borrower
- run "misc/cronjobs/cleanup_database.pl -v --restrictions 13"
=> restriction expired since 14 days is removed
- run "misc/cronjobs/cleanup_database.pl -v --restrictions 6"
=> restriction expired since 7 days is removed
- run without argument "misc/cronjobs/cleanup_database.pl"
=> You see help text for restrictions option
- run without days "misc/cronjobs/cleanup_database.pl -v --restrictions"
=> You get a purge on 30 days
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
When running update_totalissues.pl cronjob, it will stop on a corrupted
record.
This patch changes UpdateTotalIssues so that it return 1 if processing
record has succeded. Also, if mapping with biblioitems.totalissues does
not exist, the method has nothing to do so it stops and returns 1.
When processing a corrupted record, script now alerts about the error on
this biblionumber (if script is verbose) and process next record.
A total number of records with error will be printed at the end of the
script.
Test plan :
- Create a dabase with a few biblios and some issues
- Modify first biblio record (use direct sql update) : set empty value
in biblioitems.marcxml
- Launch script : misc/cronjobs/update_totalissues.pl --use-stats --commit=1000 -v
=> Without patch : the script stops at first record
=> With patch : the script prints error for first record and processes
all records
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
I was able to confirm the problem before the patch and successfully
follow the test plan.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
If you compare the database with a partial pref file, you may not be
interested in lots of lines saying that a pref is not in the file. You
were already aware of that ;)
If you add the -partial flag, these lines will be skipped.
Test plan:
Do as described above.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Works as described, passes tests and QA script.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
If you use the restore option with a partial pref file not containing a version, you will have this error. Also the count of updated prefs will be one too high.
This is corrected by a better test of the hash value in the CheckVersionPref subroutine.
Test plan:
[1] Create a small pref file and remove the version pref (if present). You
could for instance do a pref backup and remove most lines.
[2] Use the restore option with and without this patch.
So, something like:
maintclone/misc/maintenance/cmp_sysprefs.pl -c r -f 9999crucial.pref
[3] Check on the error message and the pref count.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch makes opac translation files theme independent
A side effect is that current prog translation file is
renamed.
But the renaming is not added, that gives a patch of ~60M!
Current list of languages are now obtained from pref files.
To test:
1) Apply the patch
2) For your preferred language, rename opac prog file
from 'xx-YY-i-opac-t-prog-v-3006000.po' to 'xx-YY-opac-prog.po'
3) Update that language, there must be no errors
cd misc/translation
./translate update xx-YY [-v]
Check updated po files
4) Install any language, there must be no errors
./translate install xx-YY
Check prog theme for that language
5) Create translation files. Remove a language or create new lang files
./translate create zz-WW
ls -l po/zz-WW*po
check there are 3 files (and *~) for opac
6) Check updated pod for LangInstaler.pm and translate script
When PROG/CCSR themes are removed, I'll add a Bug to remove
corresponding files.
Perhaps RM could add a followup to rename all files,
cd misc/translator/po
for old in $(ls *opac-t*); do
new=$(echo $old | sed 's/-i-opac-t-prog-v-3006000/-opac-prog/');
git mv $old $new;
done
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, no problems found.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
On the 23 July development meeting it was decided to formally deprecate
GRS-1 indexing mode for Zebra. This patch makes code fallback to DOM
on the remaining places. No behaviour change should be noticed, as DOM
has been the default for a while.
Regards
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes tests and QA script.
Also checked running Makefile.PL
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Note: mail from this doesnt work in current master, so you may not
be able to test this fully
To Test
1/ Edit the new systempreferences (ReplytoDefault and ReturnpathDefault)
2/ Optionally edit the branch the mail will be sent from, adding email addresses
3/ Test sending a mail from scheduled reports, note you will need to have the fix
for 12031 applied
4/ Check that the mails have the correct From, Replyto and ReturnPath set
The rules are
If the values are set in the branch use that, else use the syspref
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
If the 2 prefs are not defined, the script should die.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch corrects a syntax error, adds some comments to the usage
instructions and adds a count of the removed borrowers (with verbose
flag on).
Note that this is a dangerous script. It will delete your patrons
in patron category PatronSelfRegistrationDefaultCategory.
If you do not use this as a temporary category, you should NOT run this
script.
Test plan:
Check PatronSelfRegistrationDefaultCategory.
Check PatronSelfRegistrationExpireTemporaryAccountsDelay.
Based on these two settings, check the number of patrons to be deleted (date
enrolled should be before NOW minus the delay).
Backup your data and run the script.
Check the number of deleted borrowers.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This follow-up makes some language and spelling corrections to the
system preference descriptions. I have updated the preferences heading
to read "Share anonymous usage statistics" in order to emphasize the
anonymous aspect.
I have also updated the main preference name from "UsageStatsShare" to
"UsageStats" so that it is alphabetized first in the list of
"UsageStats*" preferences. I think this will make it clearer to the Koha
administrator what feature they are configuring.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch contains small improvements made in the overdue_notices.pl script.
- UTF-8 support in the HTML output
- Add the phone, cardnumber, branchname and letternumber columns
to the csv output
Testing:
I) Create an issue overdue (intranet):
0) Enter in a patron account, add some characters like
ユーザー別サイト in his address
1) Check if in Patron category administration the overdue column
is YES for his code
2) In Tools -> Notice triggers define first delay = 7, letter
Overdue notice. Nothing for second ni third
3) Check if Tools -> Notices and slips, code overdue is available
4) checkout a book with a retard more than 7 days.
5) Check if Adminstration -> Defining circulation and fine rules
for all libraries has fine rules for his patron category,
item type book.
II) Before applying the patch
0) Run misc/cronjobs/overdue_notices.pl -n -html .
1) Open the file notices_"date".html in a brower
2) Validate the characters are not correct
III) After applying the patch
0) Run misc/cronjobs/overdue_notices.pl -n -html .
1) Open the file notices_"date".html in a brower
2) Validate the characters are correct
3) Run misc/cronjobs/overdue_notices.pl -n -csv temp.csv
4) Validate phone, cardnumber, branchname and letternumber
columns and values
Sponsored-by: CCSR
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes tests and QA script.
Works as described, no problems found.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Added the Sponsored-by line.
Overdue notices, script uses method days_between which returns always
positive value of days, no mater if due_date is higher or lower from
date_to_run. This causes overdue notices to be send for real overdue and
for checkouts with due date in future, which have same days_between as
in notice triggers.
To reproduce:
1. Set up overdue notice triggers for eg. 2 day.
2. Checkout items for 2 borrowers first gets item with due date 2 days
in past and second gets 2 days in future.
3. run ./misc/cronjobs/overdue_notices.pl -n -t
4. watch that notices was generated for both of them.
To test:
1. Repeat steps 1,2
2. Apply patch
3. run ./misc/cronjobs/overdue_notices.pl -n -t
4. should be 1 notice for borrower with overdue item.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes tests and QA script, just adds an additional test.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch modifies LangInstaller.pm to catch strings
on syspref files that have no associated syspref
To test:
1) Update strings for your preffered language
2) Check that the string "you can only choose one source"
is not present on xx-YY-pref.po file
3) Apply the patch
4) Update strings again
5) Check the strig now appears [ and another one :) ]
Doing a diff before and after will show
# Enhanced Content > All
msgid "enhanced_content.pref## <strong>NOTE:</strong> you can only
choose one source of cover images from below, otherwise Koha will show
the images from all sources selected."
msgstr ""
# Local Use
msgid "local_use.pref## Nothing defined yet."
msgstr ""
6) Translate the string
7) Install your language, check Administration > System preferences >
Enhanced content > All
(on your languge) and check the string is now translated
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Since nobody is currently working on the zebra layer introduced by bug
8233, Solr won't never work.
Some code has been introduced in 3.10 to prove several search engines
can cohabit into Koha but no help/fund has been found to go ahead.
It is useless to keep this code and to maintain an ambiguous situation.
I think the indexes configuration page could be restore later if someone
else introduces a new search engine into Koha.
Test plan:
Look at the code introduced by bug 8233 and verify all is removed.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch adds a new cron script automatic_renewals.pl and a new
entry in crontab.example.
To test:
1) You need a few issues, some with automatic renewal and some without.
2) Confirm that each time you run misc/cronjobs/automatic_renewals.pl
those issues are renewed that meet all of the following criteria:
- automatic renewal has been scheduled either by issuing rule or by
checkbox on the checkout page
- the number of allowed renewals isn't exceeded
- renewal isn't premature (No renewal before)
3) Confirm that all other issues are not affected.
Sponsored-by: Hochschule für Gesundheit (hsg), Germany
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch adds options to include/exclude files by matching their names.
Also modifies current code to check only filenames (not dirs)
Checking is case insensitive !!
NOTE: The difference between -f and -m is subtle, but important.
They differs mainly on update,: -f do a merge, -m a replace
To test after patch:
A) Include only 'normarc'
1. create
cd misc/translator
perl tmpl_process3.pl create -i ../../koha-tmpl/opac-tmpl/bootstrap/en -s normarc.po -r -m normarc
- check provenance of strings
egrep "^#:" normarc.po | cut -d":" -f2 | sort | uniq
- only files with normarc in their names must be present
2. update
perl tmpl_process3.pl update -i ../../koha-tmpl/opac-tmpl/bootstrap/en -s normarc.po -r -m normarc
- repeat check
3. install
mkdir test
perl tmpl_process3.pl install -i ../../koha-tmpl/opac-tmpl/bootstrap/en -o ./test -s normarc.po -r -m normarc
- check name of created files
rm -rf test normarc.po
B) Exclude
4. create
perl tmpl_process3.pl create -i ../../koha-tmpl/opac-tmpl/bootstrap/en -s xnormarc.po -r -n normarc
- check provenance
egrep "^#:" xnormarc.po | cut -d":" -f2 | sort | uniq | grep -i normarc
- there must be no results
5. update
perl tmpl_process3.pl update -i ../../koha-tmpl/opac-tmpl/bootstrap/en -s xnormarc.po -r -n normarc
- check provenance
6. install
mkdir test
perl tmpl_process3.pl install -i ../../koha-tmpl/opac-tmpl/bootstrap/en -o ./test -s xnormarc.po -r -n normarc
- check files
find test | grep -i normarc
- there must be no results
You can also try another combination, use for example "-m patron -m user -m bottom" (or use -n)
or mixed "-m marc -n normarc", do create/install and look filenames
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch adds the option to use multiple source
dirs for tmpl_process3.pl on create/update actions.
To test after patch:
A) Old
1. install
cd misc/translator
perl tmpl_process3.pl create -i ../../koha-tmpl/opac-tmpl/bootstrap/en -s bootstrap.po -r
2. update
perl tmpl_process3.pl update -i ../../koha-tmpl/opac-tmpl/bootstrap -s bootstrap.po -r
3. install
mkdir test
perl tmpl_process3.pl install -i ../../koha-tmpl/opac-tmpl/bootstrap -s bootstrap.po -r -o ./test -q
- check same number of files
ls -lR ../../koha-tmpl/opac-tmpl/bootstrap | wc -l
ls -lR ./test | wc -l
rm -f bootstrap.po
B) New
4. create from multiple sources
perl tmpl_process3.pl create -i ../../koha-tmpl/opac-tmpl/prog/en -i ../../koha-tmpl/opac-tmpl/bootstrap/en -i ../../koha-tmpl/opac-tmpl/ccsr/en -s opac.po -r
5. update from multiple source
perl tmpl_process3.pl update -i ../../koha-tmpl/opac-tmpl/prog/en -i ../../koha-tmpl/opac-tmpl/bootstrap/en -i ../../koha-tmpl/opac-tmpl/ccsr/en -s opac.po -r
6. install (must give an error)
perl tmpl_process3.pl install -i ../../koha-tmpl/opac-tmpl/prog/en -i ../../koha-tmpl/opac-tmpl/bootstrap -s opac.po -r -o ./test
7. updated help
perl tmpl_process3.pl --help
Any other functionality must not be affected
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch modifies the update process for PO files,
removing obsoleted strings. Currently they are removed
manually as part of the standar procedure of strings update.
Also backup files (*~) need to be removed manually.
To test:
1. Update translation files for any language, ej. fi-FI
(cd misc/translation; perl translate update fi-FI)
2. Check existence of obsoleted strings
egrep "#~ msg" misc/translator/po/fi-FI-*
3. Check existence of backup files
ls misc/translator/po/fi-FI-*~
4. Reset to HEAD and clean
5. Apply the patch
6. Update again, check there are no more obsoleted
strings nor backup files
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Bug 10832 changes the fallback behavior if a patron does not have email
address: a print notice is generated into the message_queue table.
But this can cause issue for some libraries. The script should sent an
email and (generated csv, html, text file) with the list of all unsent
notices.
Test plan:
1/ Add overdue to a patron without email address (or smsalertnumber)
2/ Check email in the overdue rules configuration (or sms)
3/ Launch the overdue_notices.pl cronjob
4/ Verify the message_queue contain a print notice AND an email notice
for the library
Signed-off-by: Nick Clemens <nick@quecheelibrary.org>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This works as described and restores the old behaviour for now, with
the difference that you have a print notice generated and visible
in the patron account notices tab that will say 'pending'.
We will have to figure out how we can change the workflows nicely
to have only one script deal with print notice in the future.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch turns off the AuthoritiesLogging syspref when running the
bulkmarcimport.pl script.
It also temporarily disables the syspref caching which will have
been making the CataloguingLogging handling ineffectual. (That is,
updating the CataloguingLogging syspref in the script wouldn't
have an effect as the original cached value would be used anyway.)
_TEST PLAN_
0) Turn on "AuthoritiesLogging" syspref
1) Load an authority record using bulkmarcimport.pl
2) Note a new Authorities entry in action_logs
3) Apply the patch
4) Repeat Step 1
5) Note that no new entry is made in action_logs
(Bonus points: Do the same thing with CataloguingLogging and a
bibliographic record.)
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Tested with biblio and auth imports.
Work as described, no koha-qa errors.
Note: If you begin to load a big file and get impatient and hit ^C,
seems that current syspref value is lost...
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes tests and QA script.
Patch copies what was already done for the CatalougingLog, no problems found.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Changes make sense, tested by confirming that a patron
modification request for B_<columns> no longer results in
an error message.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Test Plan
Set up some overdue triggers, for example 5,10,15
Set up some holidays
Create some items that are past due (one due 5 days, 10 days ago etc)
Run the overdue notices script (misc/cronjobs/overdue_notices.pl)
Notice holidays are ignored
Apply the patch,
Switch the OverdueNoticeCalendar syspref to Use calendar
Run the overdue notices again
Notice holidays are now taken into account
Sponsored-by: BSZ
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Tested using script with sample conf files
RSS feeds generated are 'well formed' xml
Some koha-qa errors fixed in followup
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Cancel replacing carriage return with <br /> in printed html file as <br /> is needed in model for email notices when html format is checked
Test plan :
* define an OVERDUE notice with html activated, with <br /> at each end of line
* make sur you've got some borrowers with overdues meeting your notices triggering rules (some with valid email and others without)
* run overdue_notices.pl -html to generate html files for borrowers without email
Without patch
* email notifications are correctly formated as html content, with one <br /> at each end of line
* in html file, <br /> is duplicated at each end of line
With patch
* nothing changes for email notification
* html file is correctly formatted with only one <br /> at each end of line
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Copied test plan from comment.
No errors
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Since we switched to Template Toolkit we don't need to stick with the
sufix we used for HTML::Template::Pro.
This patch changes the occurences of '.tmpl' in favour of '.tt'.
To test:
- Apply the patch
- Install koha, and verify that every page can be accesed
Regards
To+
P.S. a followup will remove the glue code.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
So the first patron receives correct letters, but the followings received
all the previous ones AND his letters.
Eventually you end up with !n letters in message_queue where n = amount of patrons
receiving due messages as digest and having something due.
Eventually we got 4 000 000 ODUEDGST-letters of which 1 100 000 were sent to our patrons :)
This is madness!
Test plan:
0/ Delete the content of the message_queue table.
1/ Pick 3 patrons and set them to receive due messages as digest.
2/ Check 1 item out for 3 separate patrons and specify a due date today.
3/ Launch the advance_notices.pl script.
4/ Before this patch, you got 6 notices (1+2+3 [!n]). Now, you get 3 notices, 1 for each patron.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Problem exis.
Patch work as described following test plan.
No koha-qa errors
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Using perl v5.18, the following is warned on updating/installing
templates:
Smartmatch is experimental at ./translate line 54.
Moreover, the following should exist with previous perl versions:
perlcritic xgettext
Subroutine prototypes used at line 29, column 1. See page 194 of PBP.
(Severity: 5)
Subroutine prototypes used at line 44, column 1. See page 194 of PBP.
(Severity: 5)
Subroutine prototypes used at line 60, column 1. See page 194 of PBP.
(Severity: 5)
Subroutine prototypes used at line 72, column 1. See page 194 of PBP.
(Severity: 5)
Subroutine prototypes used at line 89, column 1. See page 194 of PBP.
(Severity: 5)
Variable declared in conditional statement at line 105, column 13.
Declare variables outside of the condition. (Severity: 5)
Subroutine prototypes used at line 127, column 1. See page 194 of PBP.
(Severity: 5)
Subroutine prototypes used at line 136, column 1. See page 194 of PBP.
(Severity: 5)
Variable declared in conditional statement at line 190, column 7.
Declare variables outside of the condition. (Severity: 5)
Subroutine prototypes used at line 237, column 1. See page 194 of PBP.
(Severity: 5)
Bareword file handle opened at line 238, column 5. See pages 202,204 of
PBP. (Severity: 5)
Two-argument "open" used at line 238, column 5. See page 207 of PBP.
(Severity: 5)
Subroutine prototypes used at line 277, column 1. See page 194 of PBP.
(Severity: 5)
Subroutine prototypes used at line 311, column 1. See page 194 of PBP.
(Severity: 5)
Bareword file handle opened at line 350, column 9. See pages 202,204 of
PBP. (Severity: 5)
Two-argument "open" used at line 350, column 9. See page 207 of PBP.
(Severity: 5)
Bareword file handle opened at line 353, column 5. See pages 202,204 of
PBP. (Severity: 5)
Bareword file handle opened at line 359, column 5. See pages 202,204 of
PBP. (Severity: 5)
Two-argument "open" used at line 359, column 5. See page 207 of PBP.
(Severity: 5)
perl -wc xgettext.pl
\1 better written as $1 at TmplTokenizer.pm line 474.
main::token_negligible_p() called too early to check prototype at
xgettext.pl line 52.
xgettext.pl syntax OK
Test plan:
Apply this patch and verify the warnings/errors does not appear anymore
and no regression is found on creating/updating/installing templates.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Work as described, no koha-qa errros.
Tested with perl v5.18.2
No warnings, no problem detected on create/update/install i18n files
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Bug 10833 introduced a variable loop but does not reset it every
iteration.
So the first patron receives correct letters, but the following ones
received all the previous ones as well as their own notices
Test plan:
0/ Delete the content of the message_queue table.
1/ Define advanced notices sent 2 days in advance for 2 patrons.
2/ Check 1 item out for each one and specify a due date today + 2 days.
3/ Launch the advance_notices.pl script.
4/ Before this patch, you got 3 notices. Now, you get 2 notices, 1 for
each patron.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Work well, no errors.
Tested following test plan, printing on screen or saving into db,
3 messages before, 2 after (advance_notices.pl -v -n -m 2 -c)
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Also removes a commented line that changed the value of $confirm.
If it would default to 1, we do not need it at all.
I am not saying that we need it, but just documenting that we have it.
Signed-off-by: Marc Véron <veron@veron.ch>
Small change in documentation.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Manual edit of the release notes to hopefully make
them more useful. Also added reminder about the
deprecation of the prog and CCSR public catalog
themes.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Instead of writing
use CGI;
use Koha::I18N;
my $cgi = new CGI;
my $lh = Koha::I18N->get_handle_from_context($cgi, 'intranet');
print $lh->maketext('my translatable text');
you can now write
use Koha::I18N;
print gettext('my translatable text');
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
CHARSET is now automatically replaced by UTF-8, and 'update' creates the
PO file if it does not exist.
Also do not try to create PO files if POT file creation failed (when
there is no messages to translate for example).
+ add some verbosity
+ add Locale::Maketext and Locale::Maketext::Lexicon to Koha
dependencies
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
You have to use the new module Koha::I18N
Code example:
use Koha::I18N;
use CGI;
my $input = new CGI;
my $lh = Koha::I18N->get_handle_from_context($input, 'intranet');
print $lh->maketext("Localized string!");
PO files are in misc/translator/po/LANG-messages.po.
Creation of PO files are integrated to existing workflow, so to create
PO file for a language, just run in misc/translator:
./translate create LANG
To update:
./translate update LANG
You can then translate the PO with your favorite editor. Strings will be
localized at runtime.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Works as advertised. Some details needing further attention noted on bug
report.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
The initial patch for this bug did not include a specific command line
option for customization. If a module LocalChanges.pm existed, it would
be used without asking.
This patch adds a command line option enabling the customization option
and offering the extra possibility of using another module name. If no file
name is passed, we default to LocalChanges.
Without the -custom option, behavior is as it was.
Also some POD lines are added to document the feature.
Test plan:
[1] Make a LocalChanges.pm in migration_tools. Verify that it is not used,
if you do not enable the -cust parameter.
[2] Run the script again with -cust. Verify that it is called now.
[3] Copy LocalChanges.pm to Whatever.pm. Make some change. Run with
-cust Whatever and verify that the new module is used.
[4] Copy Whatever.pm to another dir, make some change. Run with -cust and the
full name. Verify that the latest change was used.
[5] Run without any option. Check the pod documentation.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch makes two adjustments:
[1] For the verbose option, verbose level 2 now means print the
formatted version of each record.
[2] If a module LocalChanges.pm is found in misc/migration_tools, the
routine "customize" in this module is called for each marc record.
This allows you to make local changes to these marc records before
importing them.
Test plan:
[1] Test the verbose option: a single -v for medium verbosity and two
-v to dump a human-readable version of the record to standard output.
(Do not yet copy LocalChanges.pm in the folder.)
You may used the attached example file on Bugzilla:
perl misc/migration_tools/bulkmarcimport.pl -file zztest01.xml -v -v -b -m XML -t | more
Note the option t for test; no records will be imported.
[2] Copy LocalChanges.pm in the migration_tools folder. You may use the
example provided on Bugzilla (in a patch). If you use the example module,
check the contents of 001, 005 and 590 fields. (The -v -v option allows
you to easily check that.)
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
The *_PHONE notices (HOLD_PHONE, PREDUE_PHONE and OVERDUE_PHONE) should
be "merged" into the main code (i.e. HOLD, PREDUE and OVERDUE).
Test plan:
1/ Make sure you have HOLD_PHONE, PREDUE_PHONE and OVERDUE_PHONE notices
2/ Execute the update DB entry
3/ Verify the 3 notices have been merged into "phone" template of the
HOLD, PREDUE and OVERDUE notices
4/ Verify there is no regression in the Talking Tech feature (how?)
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
No koha-qa errors
Verified that notices are merged
TalkingTech_itiva_outbound.pl runs without problem... but can't produce
any output, may be not correctly configured (my setup), no warnings
nor log messages
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Test plan:
- Choose 2 patrons P1 and P2
- Edit "Patron messaging preferences" and
check SMS + email with 2 days in advance for P1
check email with 5 days in advance for P2
- defined a message for the letter code PREDUE for sms and email
(tools/letters.pl).
- select 2 barcodes (B1, B2).
* checkout B1 to P1 with a due date = NOW - 2 days
* checkout B2 to P2 with a due date = NOW - 5 days
- into the mysql cli, note the value of unsent message:
select count(*) from message_queue where status != "send";
- launch the cronjob:
perl misc/cronjobs/advance_notices.pl -c
- retry the previous sql query, you should have X + 3 unsent messages
(depending of current checkouts in your DB!).
- view all unsent message:
select borrowernumber, letter_code, message_transport_type, content
from message_queue where status != "send";
You should see:
2 messages for P1, 1 for sms, 1 for email and the letter code PREDUE
1 message for P2, email and the letter code PREDUE
Signed-off-by: Olli-Antti Kivilahti <olli-antti.kivilahti@jns.fi>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
If overdues should be sent to some patron (on the same branch), only the
first one was notified.
This patch fixes this issue.
Signed-off-by: Olli-Antti Kivilahti <olli-antti.kivilahti@jns.fi>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Test plan:
- define some complex overdue rules (tools/overduerules.pl).
For example:
First overdue from 2 to 5 days by sms and email with letter code L1
Second overdue from 5 to 15 days by email with letter code L2
Third overdue from 15 days by print with letter code L3
- define a message for each transport type selected (tools/letters.pl).
- select 3 patrons (P1, P2, P3) and 3 barcodes (B1, B2, B3).
* checkout B1 to P1 with a due date = NOW + 3 days
* checkout B2 to P2 with a due date = NOW + 10 days
* checkout B3 to P3 with a due date = NOW + 20 days
- into the mysql cli, note the value of unsent message:
select count(*) from message_queue where status != "send";
- launch the cronjob:
perl misc/cronjobs/overdue_notices.pl
- retry the previous sql query, you should have X + 4 unsent messages
(depending of current checkouts in your DB!).
- view all unsent message:
select borrowernumber, letter_code, message_transport_type, content
from message_queue where status != "send";
You should see:
2 messages for P1, 1 for sms, 1 for email and the letter code L1
1 message for P2, 1 for email and the letter code L2
1 message for P3, 1 for print and the letter code L3
- Specific case: If a user don't have a smsalertnumber and a sms is
required or if a user don't have an email defined and an email is
required, a print notice is generated.
A print notice is generated only 1 time per borrower and per level.
Signed-off-by: Olli-Antti Kivilahti <olli-antti.kivilahti@jns.fi>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
The message_transport_type param should passed to GetPreparedLetter, not
part of the "tables" parameter.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
The HOLD_PRINT and HOLD_PHONE notices become useless.
This patch modifies existing notices in order to group them into the
main notice type 'HOLD', with any pre-existing print and phone
templates in the appropriate places.
Test plan:
- Apply the patch and execute the update database entry.
- Verify that your previous HOLD_PHONE and HOLD_PRINT are displayed
when editing the HOLD notice (under phone and print).
- Choose a patron and check SMS, email, phone for "Hold filled"
(on the patron messaging preferences).
- Place a hold.
- Check the item in and confirm the hold.
- If the patron has an email *and* a SMS number, 2 new messages are put
into the message_queue table: 1 sms and 1 email.
If the patron does not have 1 of them, there are 2 new messages: 1
sms/email and 1 print.
If the user has neither of them, there is 1 new message: 1 print.
- The generated messages should correspond with the notices defined,
depending the message transport type.
Signed-off-by: Olli-Antti Kivilahti <olli-antti.kivilahti@jns.fi>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Just noting that if email and SMS are disabled in the msg prefs, the user
will not have a print message.
And if the SMS driver fails, the record status in message_queue is 'failed',
but staff may not be aware of that.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch removes several types of strings from the
PO files that cannot be usefully translated, including
ones that consist entirely of punctuation and/or HTML entities.
Test:
1) Update PO files of some lang, xx-YY-*po
cd misc/translator
perl translate update xx-YY
2) Do it again, just in case
3) rm po/xx-YY*po~
4) Extract all msgid's, sorted
cat po/xx-YY*po | egrep "^msgid" | sort | uniq > xx-YY-pre
5) Apply the patch
6) Repeat 1-3
7) Repeat 4 again, other file
cat po/xx-YY*po | egrep "^msgid" | sort | uniq > xx-YY-post
8) Do a diff, inspect results, only strings with %s and \s
diff xx-YY-pre xx-YY-post | less
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Works as described, 380 strings less to 'translate'
No koha-qa errors.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Tested according to test plan, works as described.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
koha.psgi example and plackup.sh script to run any Koha site
intranet or opac interface under Plack with optional multi-process
Starman server
plackup.sh site-name [intranet]
site-name is used to find config /etc/koha/sites/site-name/koha-conf.xml
All configuration is specified in koha.psgi, which you are welcome to edit
and tune according to your development needs (enable memcache, enable/disable
debugging modules for plack and so on).
For deployment of opac or intranet you would probably want to take a look
in plackup.sh and enable starman as web server (which is pre-forking server
written in perl) and put some web server in front of it to serve static web
files (e.g. ngnix, apache)
When you are happy with it, rename koha.psgi and plackup.sh it to site name
and save it for safe-keeping.
This commit message is included in patch as README.plack because it includes
useful information for people using plack for first time.
Test scenario:
1. install plack and dependencies, as documented at
http://wiki.koha-community.org/wiki/Plack
2. start ./plackup.sh sitename i[ntranet]
3. open intranet page http://localhost:5001/ and verify that it redirects
to http://localhost:5001/cgi-bin/koha/mainpage.pl
4. start ./plackup.sh sitename
5. open OPAC http://localhost:5000/ and verify that it redirects to
http://localhost:5000/cgi-bin/koha/opac-main.pl
6. next step is to take a look into koha.psgi and enable additional
debug modules, save file and reload page (plackup will reload
code automatically)
Signed-off-by: Magnus Enger <magnus@enger.priv.no>
Works as advertised. As I have explained in a comment on the bug
this looks like a very good starting point, and we can argue about
the details and add more options over time. Very happy to sign
this off! (My earlier concern about / not working has now been
taken care of, thanks Dobrica!)
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
The sharedate column is documented as having the following meaning:
"date of invitation or acceptance of invitation"
This patch adjust the new list-sharing code to stick with that
interpretation, as otherwise the column should have been renamed
to 'invite_expiration_date' or the like.
It also removes the "housekeeping" functionality from AddShare, as
otherwise the routine should have been named AddShareAndDoOtherStuff.
To prevent list shares from piling up, a new --list-invites flag
has been added to cleanup_database.pl. The default crontabs have
been modified to use the --list-invites flag by default.
To test
-------
[1] Make some list share invites and accept some, but now all of them.
[2] Wait 14 days (or more reasonably, manually edit the sharedate
values for the unaccepted shares to put them at least 14 days in the
past.).
[3] Run cleanup_database.pl --list-invites
[4] Verify that accepted shares remain, as to share invites that have
not yet reached more than 14 days of age.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This is a very basic start to a sip server testing script.
I imagine we will want to make it interactive in end,
essentially replicating what a SIP based self-checkout machine does.
Signed-off-by: Adrien Saurat <adrien.saurat@biblibre.com>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
If a notice is defined for the library of the patron, it should be
used.
Without this patch, the notice used is the one defined for all
libraries.
Test plan:
1/ Set the advanced notice for a patron using digest.
2/ Check one item out to this patron (backdate the return date according
the days in advance value).
3/ launch advance_notices.pl -c
4/ Verify the notice used is the default one.
5/ Define a notice for the library of the patron for PREDUEDGST
6/ launch advance_notices.pl -c
7/ Verify the notice used is the one previously defined.
8/ Check one item out to this patron (date due = today)
9/ launch advance_notices.pl -c
10/ Verify the notice used is the default one.
11/ Define a notice for the library of the patron for DUEDGST
12/ launch advance_notices.pl -c
13/ Verify the notice used is the one previously defined.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script.
Test case: User from Library A, checked out books
- in library A from A and B
- in library B from B
Verified, that the 'all libraries' notice is still used,
when no specific notice is defined.
Verified, that the patron's home library noticed is used,
when defined.
Note: Before and after the patch we print the branch information
from the patron's home library, so also using the template from
this branch, seems logical. All items over all branches are
processed into one single reminder email, before and after the patch.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
The SQL column headers is stored into the columns.def file.
This file is not managed by the translation script.
This patch makes possible the headers translation.
Note: The translation xml tags were added to avoid all lines being put
on a single line.
Test plan:
1/ update your po file
cd misc/translate;
perl translate -f columns update LANG # Replace by another language here
2/ translate header columns (search "columns.def" in your po file).
3/ install the translated columns.def
perl translate -f columns install LANG # Replace by another language here
4/ go on the report module > create a new report > next > next
5/ change the language
on the 3rd step, you should see the column header translated.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Work as described, no koha-qa errors
[on es-ES about a third of the strings translated!! :-) ]
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described and fixes a long standing translation
problem.
Passes all tests and QA script.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Show 'Unknown' when planneddate and publisheddate cannot be calculated
Also fixes SQL query in misc/cronjobs/serialsUpdate.pl that was still
using "periodicity != 32" to exclude irregular subscriptions from
results
Test plan:
1) Create a subscription in the serials module. Make sure to choose:
Frequency = Irregular
2) Test the prediction pattern, first publication date is set to
"First issue publication date" field, others will show as
'unknown'
3) Save the subscription
4) Check the created issue - it will show a published date and a
planned date (same as "First issue publication date" field)
5) Receive the issue and check the next generated issue, planned
date and published date should show as 'Unknown'
6) Generate a next issue, planned date and published date should
also show as 'Unknown'
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Work as described following test plan.
No koha-qa errors
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script.
Also tested:
- multi receiving generates mulitple issues without dates - 'unknown'
- staff detail page shows the dates empty, which is fine
- OPAC detail page shows the dates empty, which is fine
- serial collection page shows 'unknown' and those issues appear
on the 'manage' tab, as they did in the past
- Editing the issue from the serial collection page leaves the
date fields empty.
- Receving the issue, setting the status to 'Arrived' the Expected on
date is set to 'today' automatically. Date published has to be
entered manually (maybe something we could improve later
- subscription detail > issues tab shows Uknown.
- t/db_dependent/Serials/GetNextDate.t pass.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
It would be good to be able to specifically target import records from
Z39.50 for cleanup.
Test Plan:
1) Apply this patch
2) Import one or more batch record sets into Koha
3) Perform some Z39.50 searches
4) Run this command: misc/cronjobs/cleanup_database.pl -v --z3950
5) Verify that only Z39.50 records were deleted
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch enable deletion of temp files used by
tmpl_process3.pl.
Just removed coments on existing code
To test:
1. Do a count of files on /tmp ( ls /tmp | wc -l )
2. Update preferred language
3. Count again, new files on /tmp
4. Apply the patch
5. Update again, check, no new files
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
NOTE: I watched what temp files were actually in /tmp to make
sure other processes didn't magically increase/decrease
the number.
$ perl translate update {lang code}
generated 10 temporary files for me (2x5 po files). After
removing those ten files, and applying the patch, no
other files were generated.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
These lines has been commented by commit
a399dcefad without any apparent good
reason.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
We have a number of reports of libraries that were upset by Bug 10720
being fixed! These libraries preferred this single file output, but as
text only. We should bring back this behavior, but as a feature, not a
bug.
Test Plan:
1) Apply this patch
2) Run overdue_notices.pl --html
3) Note the output is wrapped in html tags
4) Run overdue_notices.pl --text
5) Note the same output, but not wrapped in html tags
Signed-off-by: wajasu <matted-34813@mypacks.net>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
To test, add the -n parameter.
The filename generation could be refactored but not blocker.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch adds three optional parameters to runreport.pl
to allow authentication with the SMTP server.
--username -> Username to pass to the SMTP server for
authentication
--password -> Password to pass to the SMTP server for
authentication
--method -> Method is the type of authentication.
Ie. LOGIN, DIGEST-MD5, etc.
Test Plan
---------
As for testing manually using a Gmail account:
1. Set up your sendmail as shown in
misc/cronjobs/CONFIGURE.gmail
2. Before applying this patch, run misc/cronjobs/runreports.pl
on your favorite report including the proper email parameters
against your gmail account.
3. Note the failure message stating the authentication
requirement.
4. Apply this patch, and return the script including the
additional parameters and specifying "LOGIN" for the method.
5. Note the successful send.
6. perldoc misc/cronjobs/runreport.pl
7. Run the koha qa test tool.
Signed-off-by: Chris Nighswonger <cnighswonger@foundations.edu>
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch expands and reformats the help text displayed
when running remove_unused_authorities.pl -h.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
remove_unused_authorities.pl previously required that --aut be supplied
to specify one or more authority types to check for unlinked authority
records. If --aut was omitted, it would default to search for
records of authority type NC, which is not present in many (or any?)
Koha databases.
Now, if --aut is omitted, unlinked authority records of any type
are removed.
To test it:
Parse only PERSO_NAME authorities:
misc/migration_tools/remove_unused_authorities.pl -aut PERSO_NAME
Parse all authorities:
misc/migration_tools/remove_unused_authorities.pl
Signed-off-by: Nicolas Legrand <nicolas.legrand@bulac.fr>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Bug 7688 changed the prototype for GetNextDate, but the serialsUpdate.pl
cronjob script had not been updated. This patch fixes the problem.
Test plan:
Before applying the patch:
1/ Check that the following SQL query returns something:
SELECT serial.*
FROM serial
LEFT JOIN subscription ON (subscription.subscriptionid = serial.subscriptionid)
WHERE serial.status = 1
AND DATE_ADD(planneddate, INTERVAL CAST(graceperiod AS SIGNED) DAY) < NOW()
AND subscription.closed = 0;
2/ Run misc/cronjobs/serialsUpdate.pl -v
It should die with an error message like this:
Can't use string ("2011-03-05") as a HASH ref while "strict refs" in use
3/ Apply the patch
4/ Run misc/cronjobs/serialsUpdate.pl -v
It should exit normally and print messages like this:
Serial issue with id=XX updated
5/ Run the Koha QA test tools.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Magnus Enger <digitalutvikling@gmail.com>
Keeps current behaviour as default.
The -append option is described in the POD and works as expected.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described.
Adding a date/time to the output might
be good, to make it easier to find the entry you were looking for.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
The problem is with the name of PO files
Currently Koha expect, among other variants, that PO filenames
began with (using as example *-pref.po):
{lang}-pref.po
{lang}-{region}-pref.po
{lang}-{script}-pref.po
{lang}-{script}-{region}-pref.po
and expect 2 chars for lang and region, and 4 for script
So the problem with Thai translation files are that it's names
do not match that convention.
This patch only rename Thai files as th-THA-* to th-TH-*.
In that way language description is right.
translate script use that chars to make dirs, and use dirs to find
description.
To test:
1) Go to I18N/L10N sysprefs
2) Install th-THA language (or simply mkdir koha-tmpl/intranet-tmpl/prog/th-THA)
3) Reload page, wrong description
4) Apply patch
5) Install th-TH language (or simply mkdir koha-tmpl/intranet-tmpl/prog/th-TH)
6) Reload page, right description
7) If you want do "mkdir koha-tmpl/intranet-tmpl/prog/th-Thai", reload,
also right description
To the reporter of this Bug: the rename of the folder is a good
workaround, when this patch is pushed to stable I'll rename Thai
files
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
This does not correct existing problems which need human
intervention. It does, however, allow for a correct installation
of Thai after the patch is made.
If we really want a patch for fixing an existing install. I
wrote it, but have not tested it.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
As pointed out by Mark, this does not fix existing installations.
Putting a note in the release notes might be something we can do here.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
installer/data/mysql/sysprefs.sql has semicolon as default.
This fixes both instances to use the same fallback value.
It also prevents CSV header info from being included in non-CSV messages.
Signed-off-by: wajasu <matted-34813@mypacks.net>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This determines if the CSV header should be included or not and
then generates it as needed using the delimiter specified in the
delimiter system preference.
TEST PLAN
---------
1. make some overdues books
2. run the overdue notices script without the -csv
3. check emails notice csv header is in the email
4. apply the patch
5. run the overdue notice again
6. check email notice CSV header is absent
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: wajasu <matted-34813@mypacks.net>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
A link to course reserves is in the global header menu but not on the
home page. All links from the global header should be present on the
home page as well. This patch adds it.
To test, apply the patch and if necessary clear your browser cache. View
the staff client home page. If you have "UseCourseReserves" enabled you
should see a link for the course reserves page which is visually
consistent with the other module links. If you do not have course
reserves enabled you should not see the link.
Unrelated: I positioned the admin link after the tools link because it
bugged me.
Signed-off-by: Broust <jean-manuel.broust@univ-lyon2.fr>
Signed-off-by: marjorie barry-vila <marjorie.barry-vila@ccsr.qc.ca>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script, works as described.
Course reserves is still accessible without permissions, but
you can't make any changes to the reserves then.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch improves the CSS used to attempt to Zebra-stripe the
output of emailed reports. This will work with some email clients,
but other email clients (e.g., Gmail) don't handle style elements in the
body or head element.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
The misc/cronjobs/runreport.pl allows for sending html reports
via email. The problem is that the Content-Type isn't set to
text/html, which means that the generated html email isn't
displayed properly.
This patch set the Content-Type, and also adds a tiny bit of
CSS to potentially alternate row colours (just to make long
reports a bit easier on the eye!)
TEST PLAN
----------
1. Run the script similar to this:
./misc/cronjobs/runreport.pl --format=html --to=YOUREMAIL --subject="Bad Formatting!" REPORTNUMBER
2. Look at the email - the html code should by visible and ugly.
3. apply the patch
4. Run the script again.
5. Look at the email - the data should look nicer now.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
DBD::Mysql provides a mysql_auto_reconnect flag. Using it avoids
the time required to do a $dbh->ping().
Benchmarks:
use Modern::Perl;
use C4::Context;
for ( 1 .. 1000 ) {
$dbh = C4::Context->dbh;
}
* without this patch on a local DB:
perl t.pl 0,49s user 0,02s system 98% cpu 0,525 total
* without this patch on a remote DB:
perl t.pl 0,52s user 0,05s system 1% cpu 37,358 total
* with this patch on a local DB:
perl t.pl 0,46s user 0,04s system 99% cpu 0,509 total
* with this patch on a remote DB:
perl t.pl 0,49s user 0,02s system 56% cpu 0,892 total
Testing the auto reconnect:
use Modern::Perl;
use C4::Context;
my $ping = $dbh->ping;
say $ping;
$dbh->disconnect;
$ping = $dbh->ping;
say $ping;
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Comment: Real improvement. No koha-qa errors
prove t/db_dependent/Circulation_issuingrules.t produces no error
prove t/db_dependent/Context.t produces no error
Test
1) dumped Koha DB, load it on a non-local server
2) run sample script whit and without patch, local and remote
use Modern::Perl;
use C4::Context;
for ( 1 .. 100000 ) {
my $dbh = C4::Context->dbh;
}
Main difference I note is with remote server
a) without patch
real 0m16.357s
user 0m2.592s
sys 0m2.132s
b) with patch
real 0m0.259s
user 0m0.240s
sys 0m0.012s
I think this could be good for DBs placed on
remote servers
Bug 10611: add a "new" parameter to C4::Context->dbh
When dbh->disconnect is called and the mysql_auto_reconnect flag is set,
the dbh is not recreated: the old one is used.
Adding a new flag, we can now force the C4::Context->dbh method to
return a new dbh.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Bug 10611: Followup: remove useless calls to dbh->disconnect
These 3 calls to disconnect are done at the end of the script, they are
useless.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch improves rebuild_zebra.pl's usage help
by explaining when --skip-deletes should be considered
and noting that it should be used in conjunction with
a cronjob to process deletions after hours.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
It seems that record deletions can cause extreme slowdowns for Koha
installations with extremely large numbers of records. It would be
helpful to be able to skip record deletions when processing the
zebraqueue with rebuild_zebra.pl so the deletions can be processed with
a lower frequency.
Test Plan:
1) Disable any zebra indexing cronjobs you may have
2) Delete a record
3) Note the operation recordDelete in the zebraqueue table having done = 0
4) Run misc/migration_tools/rebuild_zebra.pl -b -z --skip-deletes
5) Note the delete still has done = 0
6) Run misc/migration_tools/rebuild_zebra.pl -b -z
7) Note the delete now has done = 1
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script.
Also tested for authorities, no problems found.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
RM note: this is at best a work-around, and I will emphasize that
--skip-deletes should be used only when absolutely necessary.
I hope that --skip-deletes can go away at some point soon, but
that may depend on changes to Zebra.
- fix a couple typos in comments
- make replace a "$i" with a more descriptive variable name
- style some of the new code
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
The original patch creates a lockfile in the ZEBRA_LOCKDIR.
It can fall back to /var/lock or even /tmp.
If the create fails, it dies. This can be considered as very
exceptional.
This followup adjusts the fallback location in /var/lock or /tmp
slightly. It appends the database name to the folder in order to
prevent interfering between multiple Koha instances. Creation of the
lockfile has been moved to a subroutine extending directory and file
creation testing.
In the very unlikely case that we cannot create the lockfile (after
three separate tries), this follow-up allows you to continue instead
of die. This is just as we did before we had file locking here. Every
time skipping a reindex could cause more harm than continuing and
having the race condition once in a while.
Test plan:
Test adding and removing lockdir from your koha-conf.xml. Check fallback.
Note that fallback in /var/lock or /tmp must contain database name.
Remove the lockdir config line and remove permissions from fallback. In
this case the reindex should continue but with a warning.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Tested with daemon and one-off invocation simultaneously.
Tested new wait parameter.
Tried all variations of lock directory (changing permissions etc.)
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch adds locking to rebuild_zebra.pl to ensure that simultaneous
changes are prevented (as one is likely to overwrite the other).
Incremental updates in daemon mode will skipped if the lock is busy
and they will be picked up on the next pass. Non-daemon mode
invocations will also exit immediately if they cannot get the lock
unless the new flag -wait-for-lock is specified, in which case they
will wait until the get the lock and then proceed.
Supporting changes made to Makefile.PL and templates for the new
locking directory (paralleling the other zebra lock directories).
We stash the zebra_lockdir in koha-conf.xml so rebuild_zebra.pl
can find it.
To address earlier QA concerns we:
1. added code to check if flock is available and ignore locking if
it's missing (from M. de Rooy)
2. changed default for adhoc invocations to abort if they cannot
obtain the lock. Added option -wait-for-lock if the user prefers
to wait until the lock is free, and then continue processing.
3. added missing entry to t/db_dependent/zebra_config.pl
4. added a fallback locking directory of /tmp
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Doug merged the original patch with the QA changes.
Just for the record, noting here that the original patch was tested
extensively too by Martin Renvoize.
I have added a followup for some exceptional cases.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch makes Koha <-> Zebra use MARCXML for the serialization when
using DOM, and USMARC for GRS-1.
* The following functions are modified to set the Zebra record syntax
according to the current sysprefs and configuration:
- C4::Context->Zconn
- C4::Context-_new_Zconn
* A new function 'new_record_from_zebra' is introduced, which checks the
context we are in, and creates the MARC::Record object using the right
constructor.
The following packages get touched to make use of the new function:
- C4::Search
- C4::AuthoritiesMarc
and the same happens to the UI scripts that make use of them (both in
the OPAC and STAFF interfaces).
* Calls to the unsafe ZOOM::Record->render()[1] method are removed.
Due to this last change the code for building facets was rewritten. And
for performance on the facets creation I pushed higher version
dependencies for MARC::File::XML and MARC::Record (we rely on
MARC::Field->as_string).
* Calls to MARC::Record->new_from_xml and MARC::Record->new_from_usmarc
are wrapped with eval for catching problems [2].
* As of bug 3087, UNIMARC uses the 'unimarc' record syntax. this case is
correctly handled.
* As of bug 7818 misc/migration_tools/rebuild_zebra.pl behaves like:
- bib_index_mode (defaults to 'grs1' if not specified)
- auth_index_mode (defaults to 'dom')
here we do exactly the same.
To test:
- prove t/db_dependent/Search.t should pass.
- Searching should remain functional.
- Indexing and searching for a big record should work (that's what the
unit tests do).
- Test an index scan search (on the staff interface):
Search > More options > Check "Scan indexes".
- Enable 'itemBarcodeFallbackSearch' and try to circulate any word, it
shouldn't break.
- Searching for a biblio in a new subscription shouldn't break.
- Running bulkmarcimport.pl shouldn't break.
- And so on... for the rest of the .pl files.
[1] http://search.cpan.org/~mirk/Net-Z3950-ZOOM/lib/ZOOM.pod#render()
[2] a record that cannot be parsed by MARC::Record is simply skipped (bug 10684)
Sponsored-by: Universidad Nacional de Cordoba
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Bug 7934 breaks the -f option introduced in bug 9161; this patch
repairs the regression.
While the generation of the command tmpl_process3.pl, a space is
missing if the -x option is given.
The tmpl_process3.pl is called like:
/home/koha/src/misc/translator/tmpl_process3.pl -q update -i
/home/koha/src/koha-tmpl/intranet-tmpl/prog/en/ -s
/home/koha/src/misc/translator/po/fr-FR-i-staff-t-prog-v-3006000.po -r
-x 'help'-f pay.tt
Revised test plan:
1) cd ./misc/translator
2) put a warn at LangInstaller.pm line 375.
3) time ./translate update fr-FR -f pay.tt
-- note the execution time and the output. The options in the
command contain "-x 'help'-f pay.tt"
The -f param is not passed to the script.
The execution time is strangely long.
5) git reset --hard origin/master
6) apply this patch
7) put a warn at LangInstaller.pm line 375.
8) time ./translate update fr-FR -f pay.tt
-- verify the output and the execution time is now corrected.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
To test:
Set up and run the cronjobs from crontab.example with a hold set to
unsuspend today. The hold should be unsuspended.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Problem:
If you tell gather_print_notices.pl to write output to a location
you do not have write access to, it will silently fail to write the
data, but still mark unsent messages as sent.
Solution:
This patch adds two lines of defense:
1. Check that the location given for the output is writable
2. use "open() or die" instead of just "open()" when writing the
output
The first measure should catch most of the potential errors, but
I guess a directory can be writable, but the open() still can fail
because the disk is full or something similar.
To test:
- Make sure you have some unsent messages in the message_queue table,
that do not have an email adress
- Apply the patch
- Run the script, pointing at a location you do not have access to
write to. Check that the script exits with an appropriate error
message, and that the unsent messages are still unsent. Do this
both with and without the -s option.
- To fake passing the first line of defence, comment out line 62
and put this in instead:
if ( !$output_directory || !-d $output_directory ) {
- Run the script again as above, check you get an appropriate
error and that the message queue is not touched
- Reset line 62 to how it was
- Run the script against a directory you do have access to write to
and check that output is produced as expected and that messages
are marked as sent
- Sign off
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script.
Works as described.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
bulkmarcimport.pl can crash when searching for duplicates if the 005
field from the incoming or local record is not defined. This patch
fixes it.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Test plan
1/ Create a record with no 005 field
2/ Try to import it checking for duplicates, notice it crashes
3/ Try with a record with a 005 field, but the one in Koha missing
one, still crashes
4/ Apply patch
5/ No more crash
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script.
Patch fixes the problem described for importing authorities
with the bulkmarcimport.pl when trying to match with existing
records.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
The -munge-config switch has been deprecated for years, and
trying to use it would either not work at all or, if it did "work",
almost certainly damage one's Zebra configuration for Koha.
This patch removes this switch.
To test:
[1] Run rebuild_zebra.pl and verify that no mention is made
of -munge-config.
[2] Run rebuild_zebra.pl to index records in one's test database
and verify that there are no regressions.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Removing a really dangerous option
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script.
Ran rebuild_zebra.pl with various options and confirmed
that data was reindexed successfully.
No regressions found.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patches adds support for the --test option, as well as a
short message telling the user the script is running in test mode.
Test plan :
- Launch the script with -h to see the help
- Launch the script with --test and --aut with an authtypecode
that is used in your instance
- Make sure it does the same thing as launching it with -t
- Launch the script for real and make sure it still works as
expected, deleting unused authorities.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch modifies LangInstaller.pm to enable separation
of translation for Staff UI and Staff Help files.
It's a move that make sense, Help strings accounts for
44% of total word count for Staff, and as stated on
Comment #1, it could enable a different workflow on
translation work.
It's more a hack than an elegant solution, but it works.
Feel free to suggest another approach.
To test:
We need to test complete functionality, i.e. create and update
translation files and install translation, and verify that no
string is missing.
1) Before applying the patch, we need some data from staff file.
Pick your language, say de_DE, and
cd misc/translator/
perl translate update de-DE
msginit -i po/de-DE-i-staff-t-prog-v-3006000.po -o de-old.po --no-translator --no-wrap --locale=de_DE
egrep ^msgid de-old.po | sort | tee s-old | wc -l > number-old
We have the file s-old with all strings, and the number of strings on number-old
2) Apply the patch
3) New help file is called de-DE-staff-help.po, so create one
cp'ing old staff on new help
cp po/de-DE-i-staff-t-prog-v-3006000.po po/de-DE-staff-help.po
4) Make a new update, and analize
perl translate update de-DE
msginit -i po/de-DE-i-staff-t-prog-v-3006000.po -o de-new.po --no-translator --no-wrap --locale=de_DE
msginit -i po/de-DE-staff-help.po -o de-help.po --no-translator --no-wrap --locale=de_DE
egrep ^msgid de-new.po | sort | tee s-new | wc -l > number-new
egrep ^msgid de-help.po | sort | tee s-help | wc -l > number-help
cat s-new s-help | sort | uniq | tee s-all | wc -l > number-all
cat s-new s-help | sort | uniq -d | tee s-dup | wc -l > number-dup
Ideally what we need to found is:
diff s-old s-all = zero lines (old strings vs new strings)
In my test I got one line, but it's a false positive (the string "• " is present on new staff)
On numbers,
number-old - number-new - nummber-help + number-dup = 0
or
number-old - number-all = 0
(in my test again I have 1 as result, same string. Also there are 137
repeated lines between new staff and help)
All this tells me that all string to translate are preserved
5) Install translation
perl translate install de-DE
Enable language on staff, and check that help files are translated
6) Finally, create translation files
rm po/de-DE-*
perl translate create de-DE
verify that all files are created. Tests of 4) can be repeated.
7) Verify that no strings from help are present on staff UI file
egrep help po/de-DE-i-staff-t-prog-v-3006000.po
Only results came from help-top and bottom, and a few "help" on staff strings
Signed-off-by: Fridolyn SOMERS <fridolyn.somers@biblibre.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Tested according to test plan. Checked various pages in OPAC,
staff and intranet, translation was ok.
Passes QA script and tests.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Resolves warning on uninitialized author in split on line 128.
Just adds the same behavior for title on line 129 for completeness.
Fixes typo on occurrences and two other minor typos.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
On step 6 (at least), the circulation and return page redirect to the
select branch page and nothing is done.
The script should die if the user used is the sql administrator account.
Test plan:
Suppose that the sql admin account is root/root and koha/koha a
superlibrarian account.
1/
perl misc/load_testing/benchmark_staff.pl --steps=6
--url=http://admin.koha.local/cgi-bin/koha/
--password="koha" --user="koha"
should produce:
...
Step 6
...
2/
perl misc/load_testing/benchmark_staff.pl --steps=1
--url=http://admin.koha.local/cgi-bin/koha/
--password="root" --user="root"
should produce:
Authentication successful
You cannot use the database administrator account to launch this script
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch follows up on the previous patch by moving the
check for whether authority and/or biblio indexing have been
specified so that -daemon has a chance to set those modes.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Based on feedback, make daemon mode imply -z -a -b and abort
on startup if flags incompatible with an incremental update daemon
are used. Update documentation to match.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This change adds code to check the zebraqueue table with a cheap SQL query
and a daemon loop that checks for new entries and processes them incrementally
before sleeping for a controllable number of seconds. The default is 5 seconds
which provides a near realtime search index update. This is desirable particularly
for libraries that are doing active catalogue updating. The query is adjusted
based on whether -a, -b, or -a -b are specified.
Help text updated. Tested against a live 3.12 system.
Note that this fix will benefit from the fix to lack of locking (bug 11078)
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Revert commit f88f11b4f8
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Before this patch, check-url-quick.pl fails with an error. After the
patch it runs correctly.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Substitution term in overdue notices shouldn't be removed if they don't match.
It prevents use of HTML in notices to use with CSS.
Test plan :
- define an overdue notice containing some valid substitution terms + some valid html tags (<strong> or <div class="my class" to use with a css
- find a borrower with overdues that trigger this notice
- run overdue_notices.pl -html <directory>
Without patch, your html tags are missing in your html file
With the patch, they are present and can be used with a css to generate a formatted pdf file.
If you add some invalid substitution term, with the patch, they are still in the final letter, but the warn in the log helps you to correct your notice template.
Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch fixes the call to BatchStageMarcRecords() made
by the comand-line record importer. At some point in the future
we could go further and teach that tool how to apply modification
templates.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch adds a more extensible and flexible debarments system to Koha. The fields
borrowers.debarred and borrowers.debarredcomment are retained for compatibility and
speed.
This system supports having debarments for multiple reasons. There are currently
three types of debarments:
OVERDUES - Generated by overdue_notices.pl if the notice should debar a patron
SUSPENSION - A punative debarment generated on checkin via an issuing rule
MANUAL - A debarment created manually by a librarian
OVERDUE debarments are cleared automatically when all overdue items have been returned,
if the new system preference AutoRemoveOverduesRestrictions is enabled. It is disabled
by default to retain current default functionality.
Whenever a borrowers debarments are modified, the system updates the borrowers debarment
fields with the highest expiration from all the borrowers debarments, and concatenates
the comments from the debarments together.
Test plan:
1) Apply patch
2) Run updatedatabase.pl
3) Verify the borrower_debarments table has been created and
populated with the pre-existing debarments
4) Run t/db_dependent/Borrower_Debarments.t
5) Manually debar a patron, with an expiration date
6) Verify the patron cannot be issued to
7) Add another manual debarment with a different expiration date
8) Verify the 'restricted' message lists the date farthest into the future
9) Add another manual debarment with no expiration date
10) Verify the borrower is now debarred indefinitely
11) Delete the indefinite debarment
12) Verify the debarment message lists an expiration date dagain
13) Enable the new system preference AutoRemoveOverduesRestrictions
14) Set an overdue notice to debar after 1 day of being overdue
15) Check out an item to a patron and backdate the due date to yesterday
16) Run overdue_notices.pl
17) Verify the OVERDUES debarment was created
18) Return the item
19) Verify the OVERDUES debarment was removed
20) Disable AutoRemoveOverduesRestrictions
21) Repeat steps 15 though 18, verify the OVERDUES debarment was *not* removed
22) Add issuing rules so that an overdue item causes a temporary debarment
23) Check out an item to a patron and backdate the due date by a year
24) Return the item
25) Verify the SUSPENSION debarment was added to the patron
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
misc/commit_file.pl now properly displays the number
of replaced and ignored items.
misc/stage_file.pl now has a new command-line switch --item-action:
--item-action action to take if --add-items is specifed;
choices are 'always_add',
'add_only_for_matches', 'add_only_for_new',
'ignore', or 'replace'
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Prior to this patch, this script would only modify the date
created and modified fields; this patch changes the behavior
so that the fields can be created if they're not already present
in the record.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Mason James <mtj@kohaaloha.com>
Bug 9192: UNIMARC_sync_date_created_with_marc_biblio.pl field creation (followup)
Add tests :
if field < 10 it must not have a subfield
if field > 9 is must have a subfield
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Both patches applied, no koha-qa errors.
Bug 9192: followup fix typo
Fix typo on usage message.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Changes only strings in the script: the help text and the
success message for updated serial issues.
Thx to Jared for proof reading!
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Cosmetic changes:
* perltidy
* q{} for query
* list of columns is query instead of SELECT *
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Your cosmetic changes missed a comma, fixed in a followup
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Script serialsUpdate.pl must be set in crontab to run daily.
It checks serials that are late, modifies status and adds a note.
This patch adds some options :
--note : defined note, a defaut one is used if not defined
--no-note : disable automatic note
--verbose : used to control output
This patch also implements confirmation option "-c" who whas present but not used.
Test plan :
Run script on a database with late serials :
- serialsUpdate.pl -h
=> you get help text in output
- serialsUpdate.pl --man
=> you get full help
- serialsUpdate.pl -v
=> you get output of changed serials but database has not changed
- serialsUpdate.pl -c -v
=> you get output of changed serials and database has changed, with note "Automatically set to late"
- serialsUpdate.pl -c
=> database has changed without anything in output
- serialsUpdate.pl -c --note "LATE"
=> database has changed, with note "LATE"
- serialsUpdate.pl -c --no-note
=> database has changed with no note
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Works as described. No koha-qa errors.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script.
New options behave as described.
There are some existing problems with this script that I have noted
directly on the bug report.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch changes update_dbix_class_files.pl so that the connection
parameters to the reference database must be passed explicitly via
command-line switches, rather than grabbing them from the current Koha
context.
The purpose of this is to intentionally put up a roadblock to reduce
the chance that a developer (or release manager) accidentally updates
the schema files to include local testing cruft such as temporary
tables.
Usage is now as follows:
[1] Create an empty database
[2] Load the schema creation script into it, e.g.,
mysql -u dbic -pdbic dbic < installer/data/mysql/kohastructure.sql
[3] Run the schema updater:
./misc/devel/update_dbix_class_files.pl --db_user=dbic --db_name=dbic --db_passwd=dbic
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
updateDatabase.pl is a bit too close to updatedatabase.pl in installer
and may cause some confusion. I would suggest update_dbix_class_files.pl
as a unambiguous and descriptive name for this file.
Signed-off-by: wajasu <matted-34813@mypacks.net>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
* Added base class files for all tables in koha using
DBIx::Class::Schema::Loader.
* Added a (very basic) test file for C4::Context
* Also added dependencies in required files.
To Test:
[1] Install patch
[2] Make sure you can still connect to Koha
[3] You may optionally run this test script:
use Koha::Database;
use Data::Dumper;
my $db = Koha::Database->new();
my $schema = $db->schema();
print Dumper($schema->resultset("Borrower"));
If you run this file you should get a DBIx dump of the borrowers table.
Signed-off-by: wajasu <matted-34813@mypacks.net>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Test plan:
- add a fine for a patron
- verify the script does not delete this patron.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Works, script do not delete a patron with fines.
No koha-qa errors with all patches applied
Test
1) Added a fine to a patron
2) run script
3) reports condition
Trying to delete patron 5... Failed to delete patron 5: patron has 10.00 in fines
4) Patron is not deleted
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script.
Tested various combinations of options:
./delete_patrons.pl
Gives a helpful message about the use of the script.
./delete_patrons.pl -h
Outputs useful information about the use of the script
and its various options.
./delete_patrons.pl --category_code ST --library CPL
Gives the correct results in numbers and deletion was done
properly.
Also tested:
--expired_before
--not_borrowed_since
-v
Testing various conditions where a delete should not occur:
- Patron has checkouts
Patron is not in list of patrons to delete (x patrons to delete)
- Patron has fines
Patron is still in list of patrons to delete (x patrons to delete)
Checked deleted patrons had been moved to deletedborrowers.
Notes about possible enhancements:
- only print the success message 'x patrons deleted' when confirm
flag was set
- patrons with current checkouts are silently excluded from the number
of patrons to be deleted. Printing the number with current checkouts
might be helpful.
Changes made:
Fixed a small error in the documentation: expired_date is expired_before.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
[1] Patron deletion now happens atomically; if one part
of the process fails, the record isn't left in a
partially deleted state.
[2] The routine for handling lists properly during patron
deletion is now invoked.
[3] The script now prints an indication if it's run
without --confirm; otherwise, one might think that
patron records were actually being deleted.
[4] --verbose now actually does something.
Without --verbose, the script will print the dry-run
warning (if applicable), the number of patrons to be
deleted, and error messages.
With --verbose, the script will also print a line with
the borrowernumber of each patron to be deleted.
To test:
[1] Run the script with and without --verbose and compare
the, well, verbosity.
[2] Run the script without --confirm and note that the script
prints a message saying that it's running in dry-run mode.
[3] Use the script to try to delete one or more patrons that have
loans. Confirm that error messages are printed reporting
foreign constraints preventing the deletion. Also confirm that
no new rows are added to deletedborrowers for those patrons that
could not be completely deleted.
[4] Use the script to delete a patron that has a public list. Verify
that after the deletion, the public list still exists but now
has a null owner.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
[1] Use --library instead of --branchcode to be consistent
with other scripts and user-facing Koha terminology.
[2] Use --not_borrowed_since instead of --not_borrowered_since;
no need to expose typos in the API to the user.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This followup adds:
- execute flag (+x) for the cronjob script.
- replaces --dry-run with --confirm (according with existing scripts).
- changes output text (remove 'first person' style).
- updates the doc and simplifies the dates parameters.
- changes flags PrintError and RaiseError for the dbh in order to catch
something if an error occurs...
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch provides a cronjob script for deleting patrons.
It takes 3 options:
--not_borrowed_since
--expired_date
--category_code
See the perldoc misc/cronjobs/delete_patrons.pl.
Use the -v flag for a verbose mode.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Currently, if you launch the script
misc/load_testing/benchmark_staff.pl, it always displays
"Authentication successful" or continue to execute the script even if
nothing is done.
This patch checks if the url is right and if the authentication is
correctly done.
Test plan:
Suppose that a correct login/pwd is koha/koha
1/
perl misc/load_testing/benchmark_staff.pl --steps=1
--url=http://admin.koha.local/cgi-bin/koha/
--password="koha" --user="koha"
should produce:
Authentication successful
...
Step 1
...
2/
perl misc/load_testing/benchmark_staff.pl --steps=1
--url=http://admin.koha.local/cgi-bin/koha/
--password="KOHA" --user="KOHA"
should produce:
Authentication failure: bad login/password
3/
perl misc/load_testing/benchmark_staff.pl --steps=1
--url=http://admin.kobe.local/cgi-bin/koha/
--password="koha" --user="koha"
should produce:
Authentication failure:
500 Can't connect to admin.kobe.local:80 (Bad
hostname)
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Comment: Works as described, detects bad url and user credentials.
No koha-qa errors
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described and gives better error messages.
There are some warnings output when running the script before
and after applying the patch.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch adds functionality to forgive overdue fine when an item is
set to lost status. Fines are forgiven only when the syspref
WhenLostForgiveFine is set to yes. Item can be set to lost status from:
- catalogue/moredetail.pl
- cataloguing/additem.pl
- tools/batchMod.pl
- misc/cronjobs/longoverdue.pl
Changed subroutine C4::Circulation::LostItem to forgive fines on the
item depending on the value of syspref WhenLostForgiveFine. This
routine is currently used to return an item and charge a replacement
cost.
Also added a new syspref in C4::Circulation::LostItem -
WhenLostChargeReplacementFee. The replacement fee will now be charged
only if this syspref is set to yes. The default value of the
WhenLostChargeReplacementFee is yes, meaning that current behavior
will not change during upgrade.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Alex Hatley <alexh@cctexas.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Testing notes on last patch in series.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
For PDF generation, HTML files need explicit <br /> HTML tags. With
this patch, carriage return are replaced by <br /> when letters are
written into HTML files.
Test plan :
- Ensure you've got at least one reader with overdue triggering notice
- Ensure that your notice template got HTML checked
- Run misc/cronjobs/overdue_notices.pl -v -n -html <dirname>
and misc/cronjobs/printoverdues.sh <dirname>
Without patch, the content of the letter is all on one line in PDF file
With the patch, PDF file is correctly formated
- remove your reader email
- Run misc/cronjobs/overdue_notices.pl -v -html <dirname>
and misc/cronjobs/printoverdues.sh <dirname>
Without patch, the content of PDF file is all on one line
with the patch, PDF file is correctly formated.
- restore reader email
- run misc/cronjobs/overdue_notice.pl -v -html <dirname>
Verify that the a message has been generated in message_queue table
With or without patch, the message is the same
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
The synopsis for the -html option used to be:
-html <filename> Output html to file
but the argument to this option should actually be a directory,
not a filename. This patch fixes the synopsis.
To test:
- Run perldoc misc/cronjobs/overdue_notices.pl
- Check that the synopsis is as shown above
- Apply this patch
- Run perldoc misc/cronjobs/overdue_notices.pl
- Check that
- the synopsis asks for a directory, not a filename
- that the description of the -html option further down in the
perldoc now mentions the filename that the HTML file will be
created with.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Works as described. No koha-qa errors.
If feeded with a filename -html option fails with many messages like
print() on closed filehandle $html_fh at misc/cronjobs/overdue_notices.pl line 384.
Perhaps it could be improved, but that was the old behavior.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Improves documentation, no negative side effects found.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch removes three cronjobs that are believed to be
unused for the following reasons:
[1] The commit message that introduces them indicates that they
were written for a particular library. A staff member from
that library has confirmed that they are not in use.
[2] The scripts have received essentially no patches since they
were introduced except for being caught up in a broader
code-improvement patch.
[3] They refer to a column that no longer exists in biblioitems.
[4] They no longer adhere to guidelines for command-line utilities,
and there's been no sign that anybody has felt the urge to
correct that.
[5] They are not referenced by another code or the manual, and
the mailing list archives do not include any substantive discussion
of their use.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch replaces carriage return with <br /> in the content of
hold notices for printing. This is necessary to convert html file
into well formatted pdf file.
Test plan :
- check in an item reserved by a borrower
that has not activated email notification
- verify in message_queue table that you've got a
new HOLD_PRINT notice with status 'pending'
- run gather_print_notices.pl <directory>
Without the patch, the script generates a html file without <br /> tags.
If you run printoverdues.sh <directory>, the text in the resulting PDF
file is all on one line
With the patch, the script generates a html file with <br/> tags and
the PDF file created by printoverdues.sh is well formatted.
Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Add an option to cleanup_database.pl to purge the search_history
entries older than X days.
Test plan:
- Apply patch
- Check that your test DB has some entries a little older than 30 days
and a few ones even older than that in search_history:
SELECT * FROM search_history WHERE time < DATE_SUB( NOW(), INTERVAL 30 DAY );
If not, modify some existing entries.
- Run cleanup_database with a fixed number of days (replace XX with
something higher than 30)
/misc/cronjobs/cleanup_database.pl --searchhistory XX
- Check that entries older than XX days got deleted from search_history
- Run without the day parameter
/misc/cronjobs/cleanup_database.pl --searchhistory
- Check that entries older than 30 days got deleted from search_history
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Fixes the following koha-qa.pl error:
FAIL misc/cronjobs/overdue_notices.pl
OK pod
OK forbidden patterns
OK valid
FAIL critic
# Variables::ProhibitConditionalDeclarations:
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
If there is no active currency, when running overdue_notices.pl
you get a sofware error "Can't use an undefined value as a HASH
reference" on GetCurrency() function call.
With this patch, if there is no active currency, fines are formated
by default 0.00 and notices are correctly generated.
Test plan :
- have at least one borrower with overdue that should trigger a notice
- verify that there is no active currency (Adminitration > Currency &
Exchange rates)
- run misc/cronjobs/overdue_notices.pl -v -n (to get the notice directly
on output)
=> without the patch you get the software error
=> with the patch, notices are correctly generated
If an active currency is defined, the script overdue_notices.pl runs
the same with or without patch
Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
The variables for AUTH_INDEX_MODE and ZEBRA_TOKENIZER were not
being saved to the koha_install_log file. As a result when using the
--prev-install-log option in Makefile.PL the user was still prompted
to select them.
This patch adds the appropriate variables to the list saved in
the install log.
To test:
On a (non-package) system installed/upgraded without the patch running
'perl Makefile.PL --prev-install-log /path/to/koha-install-log' will
still prompt you to choose authorities indexing mode and select
between chr and icu, after upgrading with this patch applied the same
command should get the responses from the install log and not require
user intervention.
The values can be seen written into misc/koha-install-log
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
From the bug report:
At the end of printoverdues.sh, an archive is generated
containing all files present in directory given as parameter.
As archives are generated in this given directory, they
contain previously generated tar files, creating oversized files.
Only .pdf files should be archived
All tests and QA script pass.
Worked ok in my tests, only packign PDF in the given directory.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch adds a new maintenance script: cmp_sysprefs.pl
Test plan:
1 Run with -cmd backup -file zz01. Check that file.
Run with -cmd test -file zz01. Check zz01.sav.
2 Run with -cmd compare -file zz01. No differences expected.
3 Edit zz01: delete two prefs, change two prefs and add two new prefs.
4 Run with -cmd compare -file zz01. Are all six changes reported?
5 Add local use preference zz02 in the staff client (no explanation, options).
6 Run with -cmd backup -file zz02.
7 Delete local use pref zz02 from the staff client.
8 Run with -cmd restore -file zz02. Check if local pref zz02 came back.
9 Delete local use pref zz02 again from the staff client.
10 Run with -cmd compare -file zz02 -add. Check if local pref zz02 came back.
11 Change the value of zz02 in the staff client.
12 Run with -cmd compare -file zz02 -add. Check the value: not updated?
13 Run with -cmd compare -file zz02 -upd. Check the value: updated now?
14 Edit file zz02. Add a comment line and delete the line for pref zz02.
15 Run with -cmd compare -file zz02 -del. Is pref zz02 deleted?
16 Add local use preference zz02 in the staff client (WITH explanation).
17 Run with -cmd compare -file zz02 -del. pref zz02 should not be deleted.
18 Run with -cmd compare -file zz02 -del -ign-opt. zz02 should be deleted now.
Do the next steps only on a restorable test db:
19 Create file zz03. Leave it empty.
Compare with: -cmd compare -file zz03 -del -ign-opt.
All prefs gone except Version?
20 Restore with: -cmd restore -file zz01.sav.
Compare with -cmd compare -file zz01.sav. Nothing reported?
Note: The explanation or options are not recovered. (See also BZ 10199.)
This affects local use preferences only.
If you need them, restore your test db. Remove the zz files.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Amended patch
Only cosmetic stuff:
Perltidied with xt/perltidyrc.
Replaced most double quotes by single quotes around SQL statements.
Moved the usage into POD for pod2usage.
Passing no file shows help screen too.
Counting the db updates more accurately with return value of do.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
You can now specify a number of days with the --mail parameter. Only
mails older than the specified number of days will be deleted.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
To test:
0) Don't apply the patch yet.
1) Have the CataloguingLog system preference set to 'Log'.
2) Import a file of bibliographic records with bulkmarcimport.pl.
3) Check the state of CataloguingLog system preference -- it will be
set to 'Don't log'.
4) Apply the patch.
5) Repeat steps 1-3. The CataloguingLog system preference
will be 'Log'.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Comment: No test plan, but works.
Tested adding auth, biblios or both, then rebuilding -z
No errors.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Test Plan
1/ run misc/mod_zebraqueue.pl -a 1
2/ In your koha db
SELECT * FROM zebraqueue WHERE done = 0;
Check that a row for authority record id 1 has been inserted
3/ run misc/mod_zebraqueue.pl -b 1
4/ In your koha db
SELECT * FROM zebraqueue WHERE done = 0;
Check that a row for biblio record id 1 has been inserted
5/ run misc/mod_zebraqueue.pl
Make sure the help is sensible
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Without this patch, the -f param (for the translate script) add the
modified line in the po file BUT comment all lines from others files.
This patch concat the generated file with the previous one and merge
them. This way produce a pretty po file with all our strings :)
+ Modification in LangInstaller.pm to fix a bug when the -f param was not
given.
Test plan:
1/ Update your po file :
cd misc/translator
perl translate update fr-FR
git commit -a -m"TMP PO"
2/ Modification on 2 files:
ie.
catalogue/advsearch.tt:32 <h1>Advanced search Foo</h1>
catalogue/issuehistory.tt:38 <th>Patron Bar</th>
3/ Update your po file with only the first file:
perl translate update fr-FR -f advsearch.tt
4/ Edit your po file and check that only the foo string is present (or
git diff).
5/ Update your po file with only the second file:
perl translate update fr-FR -f issuehistory
6/ Edit your po file and check that 2 strings are present (or git diff).
7/ Change the translation for these 2 strings and delete the fuzzy
lines.
8/ Install the first file for your language:
perl translate install fr-FR -f advsearch.tt
9/ Edit your translated file and verify the string is translated. Check
that the issuehistory.tt file is not changed.
10/ Same for issuehistory:
perl translate install fr-FR -f issuehistory
11/ stash your modification in your tt files (or reset --hard):
git stash
12/ Check in your po file that the 2 strings are commented (git diff).
13/ To finish, install all template files and check that they are
replaced correctly:
perl translate install fr-FR
Signed-off-by: Frédéric Demians <f.demians@tamil.fr>
I have squashed the both follow-up patches.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
The previous version of tmpl_process3.pl says in the pod:
-i, --input=SOURCE Get or update strings from SOURCE file.
SOURCE is a directory if -r is also specified.
But is was not possible to specify one or more files.
This patch allows us to give one or more specific file with the -f
parameter.
for eg.:
perl tmpl_process3.pl install -i /home/koha/koha-tmpl/opac-tmpl/prog/en/modules/
-o /home/koha/koha-tmpl/opac-tmpl/prog/fr-FR/modules/
-s /home/koha/misc/translator/po/fr-FR-i-opac-t-prog-v-3006000.po
-r
-f opac-account.tt
-f opac-main.tt
You can specify:
-f advsearch.tt => translate all files with a filename containing
'advsearch.tt'
or
-f search => will translate acqui/histsearch.tt, acqui/z3950_search.tt, etc.
Bug 9161: Followup: Add a -f param for the translate script
Now you can directly call the translate script
(misc/translator/translate) with the -f parameter
eg.:
./translate install|create|update -f search.tt -f main.tt
Signed-off-by: Frédéric Demians <f.demians@tamil.fr>
I've squashed the 3 patches, and reported doc into 'translate' script.
It works as advertised.
Side note: It would be great to extend this functionnality in order to
be able to apply the translation to XSL files stored outside Koha
directories hierarchy. Useful to translate site-specific XSLs defined
with XSLTResultsDisplay, and other sysprefs.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
With this patch, header is created when creating a new syspref .po file
for a new language (translate create), and is added if it doesn't
already exist when updating an existing language (translate update).
To test:
(1) Create a new language syspref file:
./translate create -p xx-XX
Check that there is an header
(2) Update an existing syspref file without header:
./translate update fr-FR
Check that fr-FR-pref.po has a header
(3) Update an existing syspref file with header:
Modify fr-FR-pref.po. Add an email, or whatever.
./translate update fr-FR
Check that fr-FR-pref.po has a header with the manual modification
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Comment: Work as described. No errors.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
All tests and QA script pass.
Also tested that updated pref files can still be installed correctly.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Currently, the perl path for get_report_social_data.pl is "#!/bin/perl"
when it should be "#!/usr/bin/perl".
While I'm not entirely sure how to test this, rangi did mention:
23:47 (it wouldnt work on my debian install)
23:48 zsh: no such file or directory: /bin/perl
It's a pretty trivial change, so I'm not sure it needs much of a test
plan.
Signed-off-by: Magnus Enger <magnus@enger.priv.no>
Before the patch "grep -r '#!/bin/perl' in the misc dir shows one file
with this line, and it is indeed get_report_social_data.pl. After the
patch there are no occurrences left.
Passed-QA-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Remedied by:
- in Circulation.pm changing AnonymiseIssueHistory so that it returns ($rows, $err_history_not_deleted) instead of $rows
- consequential change to misc/cronjobs/batch_anonymise.pl to handle updated return value, and fail if there is an error
- consequential change to tools/cleanborrowers.pl although this still fails silently (raised as bug 9944)
- update of opac-privacy.pl to check return value and pass on error
- update of opac-privacy.tt to display error if appropriate
Note bug 9942 remains unfixed, which is a similar issue upon issue return.
To test:
1. OPAC
- enable privacy mode (preference OpacPrivacy)
- leave anonymous patron set to zero (preference AnonymousPatron)
- attempt to delete user history
- observe error
- check history - still there
- change anonymous patron to a valid user
- attempt to delete user history
- observe success message
- check history - gone
2. cleanborrowers.pl
- test it functions as before. bug 9944 has been raised for it continuing to silently fail.
3. batch_anonymise.pl
- enable privacy mode (preference OpacPrivacy)
- leave anonymous patron set to zero (preference AnonymousPatron)
- run script (I use --days -1 for testing)
- script should fail with a Carp message
- change anonymous patron to a valid user
- run script as before
- script returns quietly
- check history - gone
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Mason James <mtj@kohaaloha.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Comment on second patch.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
To test:
run kohaclone/misc/cronjobs/fines.pl --help and note the help text. It should match the settings in System Preferences.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Documentation change, passes all tests.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
http://bugs.koha-community.org/show_bug.cgi?id=8745
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
1) Runs not with root.
2) Runs with root and -run-as-root.
3) Runs using the normal koha user.
Note: Maybe the message should be clear about why
running as root is bad and which user you should
be running the script with?
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Added a check to warn users of execution as root user.
Added a 'runas-root' switch to allow users to force execution as root user.
Signed-off-by: Mason James <mtj@kohaaloha.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
All tests and QA script pass.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
When in DOM index mode, files exported by `rebuild_zebra.pl -x` are
wrapped by '<collection></collection>' tag.
This is a problem because splitting files produces invalid files.
This is fixed by adding the missing <collection> tags in each generated
file.
Another problem was that the wrong zebra configuration file was used.
The script now uses C4::Context->zebraconfig($server)->{config} to know
which configuration file has to be used.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This avoid indexing failures due to "bad offset" or "bad length" error
with ISO2709 format
+ minor improvements:
- --length parameter is optional. If not given, it will execute the
right sql query to find the number of records to index
- new parameter --reset-index. If set, index is reset before indexing
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Comment: Work as described. No errors.
Test: Edit record to make it longer than 9999. Without patch rebuild_sliced
fails. With patches works.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Patch removes misc/translator/stats.pl that is no
longer used and references deleted script
update.pl in same directory.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Test plan:
Clear the zebra queue (run rebuild). Update one biblio.
Rebuild zebra (again) with -z. Check zebra log: note 2 exported records.
Now apply patch, and repeat: You will see 1 exported record.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Signed-off-by: Magnus Enger <magnus@enger.priv.no>
"perldoc misc/translator/translate" looks good and now mentions
the -v option.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
When using rebuild_zebra to index all records, skip over
bibliographic or authority records that don't come out
as valid XML. Also, strip extraneous XML declarations when
using --nosanitize.
Test plans
----------
Note that both plans assume that DOM indexing is turned on.
Test plan #1
============
[1] Run rebuild_zebra.pl with the -x -nosanitize options. Without
the patch, zebraidx should terminate early and complain
about invalid XML.
[2] With the patch, the rebuild_zebra.pl should work without
error.
Test plan #2
============
[1] Intentionally make a MARCXML record invalid, e.g, by running
the following SQL:
UPDATE bilbioitems SET marcxml = CONCATENATE(marcxml, 'junk')
WHERE biblionumber = 123;
[2] Run rebuild_zebra.pl -b -x -r
[3] Without the patch, only part of the database will be indexed.
[4] With the patch, rebuild_zebra.pl will not export the bad
record and will give an error message saying so, but will
successfully index the rest of the records.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Larry Baerveldt <larry@bywatersolutions.com>
Signed-off-by: Mason James <mtj@kohaaloha.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
License and copyright statement added.
Thanks to Bernardo Gonzalez Kriegel for reminding me about this.
http://bugs.koha-community.org/show_bug.cgi?id=5608
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Comment: add license information. No errors.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
With the MARC21 standard moving from the 440 tag to the 490, this tool is
to help libraries make the move. It switches any information in 440 tags to
490 tags, and any information in 490 tags to 440 tags. That seemed like the
best way to go to me. There is also an option to create 830 tags for any 44
information, like authorities, that can't be represented in the 490 tag.
To Test:
locate some biblios with 440 or 490 tags filled.
run bin/migration_tools/switch_marc21_series_info.pl -c
observe that the information in the biblios has switched 4xx tags.
http://bugs.koha-community.org/show_bug.cgi?id=5608
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Comment: Work as described. No errors.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
With the MARC21 standard moving from the 440 tag to the 490, this tool is
to help libraries make the move. It switches any information in 440 tags to
490 tags, and any information in 490 tags to 440 tags. That seemed like the
best way to go to me.
To Test:
locate some biblios with 440 or 490 tags filled.
run bin/migration_tools/switch_marc21_series_info.pl -c
observe that the information in the biblios has switched 4xx tags.
http://bugs.koha-community.org/show_bug.cgi?id=5608
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Comment: Works as described. No errors.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This patch reintroduces fines in overdue_notices.pl with minimal
changes to exsiting code.
It DOES changes template syntax, it used to be <fine>USD</fine> but
currency was not recalculated and used only to select format, so
now we are using active system currency because values are in it
anyway.
Example notify template:
<item>"<<biblio.title>>" by <<biblio.author>>, <<items.itemcallnumber>>,
Barcode: <<items.barcode>> Fine: <<items.fine>> </item>
If your active currency doesn't have valid ISO code this code will
fallback to sprintf with two decimal digits, and you can insert
currency symbol in template itself (currency field is not editable
through web interface, so this fallback might be useful for existing
installations).
Test scenario:
1. configure fine amount under "Circulation and fines rules"
for patron category and item type
2. checkout item with correct type to partron in correct
category with due date set to yesterday
3. verify that overdue notice uses new <<items.fine>> tag
4. run ./misc/cronjobs/fines.pl to calculate fines
5. run ./misc/cronjobs/overdue_notices.pl -n
and verify that fine amount is included
Notes: Tested using the default ODUE notice, changing:
<fines>USD</fines>
for
<<items.fine>>
Everything worked as expected with finesmode=production set.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
See the script's documentation for more details
New parameters are:
- authtypes
- filter
- insert
- update
- all
Signed-off-by: Pascale Nalon <pascale.nalon@gmail.com>
This patch is live in Mines ParisTech since 2012-07-24.
Signing off
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
- Moved the sign-off from bugzilla to the commit message.
- All tests and QA script pass.
- Amended commit message to list new parameters.
- Verified this patch works on a UNIMARC installation.
- Verified normal import still works correct on a MARC21
installation.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Followup : Adding test if results has some records and usage example for
--where clause
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
I infer from the bug comments that a proper test for this patch is to
check how the script reacts if it returns no results with a --where
clause, and to verify that there is a good usage example for the --where
option. These are both true, so I think this passes.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
All tests and QA script pass.
Tests done:
- tested -s option with \;
- tested -f surname -f borrowernumber to have multiple fields specified
- tested -w with "borrowernumber > 100" and similar with and without
results - if no results a message is shown
- tested -h shows documentation for new options
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Tested, works as advertised. Note, to use tab character as a separater,
do this: -s $'\t'
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Comments on second patch.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Script overdue_notices.pl creates a printed letter if borrower as no email.
Actually, unless --email option is used, first valid email of borrower is used. Email field should depend on AutoEmailPrimaryAddress syspref like in other letter creations.
Signed-off-by: MJ Ray <mjr@phonecoop.coop>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
All tests and QA script pass.
Following test plan from Julien Sicot from Bugzilla:
- with patron's email address specified on "primary email"
field AND syspref "AutoEmailPrimaryAddress" on "home"
=> notice sent to patron | OK
- with patron's email address specified on "secondary email"
field AND syspref "AutoEmailPrimaryAddress" on "work"
=> notice sent to patron | OK
- with patron's email address specified on "alternate email"
field AND syspref "AutoEmailPrimaryAddress" on "alternate"
=> notice sent to patron | OK
- with patron's email address specified on "secondary email"
OR "alternate email" field AND syspref "AutoEmailPrimaryAddress" on "home"
=> no notice sent to patron, overdue notice sent to koha admin | OK
- with patron's email address specified on "primary email" OR
- with patron's email address specified on "primary email" field
AND syspref "AutoEmailPrimaryAddress" on "home"
=> notice sent to patron | OK
- with patron's email address specified on "secondary email" field
AND syspref "AutoEmailPrimaryAddress" on "work"
=> notice sent to patron | OK
- with patron's email address specified on "alternate email" field
AND syspref "AutoEmailPrimaryAddress" on "alternate"
=> notice sent to patron | OK
- with patron's email address specified on "secondary email"
OR "alternate email" field AND syspref "AutoEmailPrimaryAddress"
on "home"
=> no notice sent to patron, overdue notice sent to koha admin | OK
- with patron's email address specified on "primary email"
OR "secondary email" field AND syspref "AutoEmailPrimaryAddress"
on "alternate"
=> no notice sent to patron, overdue notice sent to koha admin | OK
- with patron's email address specified on "primary email"
OR "secondary email" OR "alternate email" field and syspref
"AutoEmailPrimaryAddress" on "first valid" => notice sent to patron | OK"secondary email" field AND syspref "AutoEmailPrimaryAddress" on "alternate" => no notice sent to patron, overdue notice sent to koha admin | OK
- with patron's email address specified on "primary email" OR
"secondary email" OR "alternate email" field and syspref
"AutoEmailPrimaryAddress" on "first valid" => notice sent to patron | OK
Note: Options for AutoEmailPrimaryAddress should be like the field names on
the patron form (primary, secondary...), but this is outside the scope of this
patch.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Removed NoZebra vestiges. This comprises several code blocks that depend on the NoZebra syspref and NZ related functions/methods.
C4::Biblio->
GetNoZebraIndexes
_DelBiblioNoZebra
_AddBiblioNoZebra
C4::Search->
NZgetRecords
NZanalyse
NZoperatorAND
NZoperatorOR
NZoperatorNOT
NZorder
C4::Installer->
set_indexing_engine
Sponsored-by: Universidad Nacional de Córdoba
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
With the inclusion of this patch, all searches will (try) to use
QueryParser for handling queries for both the bibliographic and authority
databases if UseQueryParser is enabled. If QueryParser is unavailable,
UseQueryParser is disabled, or the search uses CCL indexes, the old
search code will be used.
To test:
1) Apply patch.
2) Run the unit test with `prove t/QueryParser.t`
3) Enable the UseQueryParser syspref.
4) Try searches that should return results in the following places:
* OPAC (simple search)
* OPAC (advanced search)
* OPAC (authorities)
* Staff client (header search)
* Staff client (advanced search)
* Staff client (cataloging search)
* Staff client (authorities)
* Staff client (importing a batch using a match point)
* Staff client (searching for an item for adding to a label)
* Staff client (acquisitions)
* Staff client (searching for a record to create a serial)
* ANYWHERE ELSE I HAVE FORGOTTEN
5) Disable the UseQueryParser syspref. Repeat at least some of the
searches you did above.
6) If all searches worked, sign off.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Elliott Davis <elliott@bywatersolions.com>
Searching still works as expected for variuos places.
QueryParser syspref seemed to be enabled by default
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
<dcook> Then bulkauthimport.pl?
<jcamins> bulkauthimport should not be used ever.
<eythian> it probably should be deleted
<jcamins> It should be.
Signed-off-by: David Cook <dcook@prosentient.com.au>
I've poked around in bulkmarcimport.pl and it certainly seems to have the functionality that Mason (and Jared and Robin) mention.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
The -log option become optional if the -output_dir is given.
Test plan:
call the script with
1/ no one parameter : no log file
2/ -l : log file will be created in /tmp
3/ -o=/home/koha/var/log : log file with be created in the specified
4/ -o=/home/koha/var/log -l: Same as 3/
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Comment: All combination of options tested. Works well. No errors.
Signed-off-by: Elliott Davis <elliott@bywatersolions.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
To test:
1/ Before the patch run misc/cronjobs/fines.pl
Notice that a file has been written to /tmp
2/ rm the file
3/ Apply the patch and run the script again
Notice the file is not created
4/ run the script with -l
Notice the file is created again
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Comment: Now it work as described. No errors.
Signed-off-by: Elliott Davis <elliott@bywatersolions.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
In order to reduce the number of concurrent downloads on the staff
client home page the images representing the various modules (circ,
patrons, etc) could be combined into one sprite.
This patch creates a new sprite containing all images and corrects the
CSS for the default and hover states of each link to match the previous
version. The separate images have been removed. Also added is a
GIMP-compatible Photoshop file from which the sprite is generated.
To test, apply the patch, clear your browser cache, and view the staff
client home page. Each module icon should look correct in its default
and hover states.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Comment: Work as described, Good idea! No errors.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works nicely, no problems found.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
To Test:
Set up a borrower to receive due and/or predue notices.
Define your predue and/or due notice to use <<items.content>>
Give your borrower an issue that will trigger a notice to be sent
(Example: Henry Acevedo has checked out a book that will be coming due tomorrow,
he wants to receive predue notices 1 day in advance)
On the command line, run (your paths may vary, these are mine):
sudo env KOHA_CONF=/etc/koha/sites/devlibrary/koha-conf.xml PERL5LIB=/usr/share/koha/lib perl advance_notices.pl -c -n
Note that the date listed is the due date, not the issue date.
Then run:
sudo env KOHA_CONF=/etc/koha/sites/devlibrary/koha-conf.xml PERL5LIB=/usr/share/koha/lib perl advance_notices.pl -c -n --itemscontent=issuedate,title,author,barcode
Note that the date listed is the issue date, not the date due.
Also run
sudo env KOHA_CONF=/etc/koha/sites/devlibrary/koha-conf.xml PERL5LIB=/usr/share/koha/lib perl advance_notices.pl --help
Should show the help.
sudo env KOHA_CONF=/etc/koha/sites/devlibrary/koha-conf.xml PERL5LIB=/usr/share/koha/lib perl advance_notices.pl --man
Should show the man page version of the help.
sudo env KOHA_CONF=/etc/koha/sites/devlibrary/koha-conf.xml PERL5LIB=/usr/share/koha/lib perl advance_notices.pl
Should show the help. This script requires confirmation before running (-c or nothing is done).
Note that the documentation refers to the --itemscontent= option and now allows --man as well as --help. Also it is a proper POD.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Works as advertised according to the fine test plan.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This patch cleans up some loose ends:
- Star ratings images are now in one sprite. Removing
separate star ratings images.
- Amazon ratings have been removed. Related image files
are removed by this patch.
- The tag images associated with tag links on the search
results page were not incorporated into the main sprite.
Now they are.
Added: The Photoshop file from which the main sprite was
generated, in case that is helpful to others. Each layer
is named, and comments have been added to the CSS
referencing the layer names. The file is GIMP-compatible.
Revisions:
- Rebased on current master
- Ported some changes to CCSR theme
- Removed unused CSS which referred to deleted images
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Mason James <mtj@kohaaloha.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Adds the -email option to overdue_notices.pl, which is repeatable
-email value can be:
- 'email'
- 'emailpro' or
- 'B_email'
- perltidy done
- in production for a BibLibre customer
- validated by the customer
Signed-off-by: Claire Hernandez <claire.hernandez@biblibre.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This reverts commit 40f9914e60.
Per Colin's report (confirmed by Mathieu and Julian):
"I've had some problems with this patch. With it applied I found
overdues for multiple users getting the same user's overdue message
text, eg user 1 gets their correct message but users 2, 3 and 4
get it as well. reverting the patch corrected this. I've not tracked
down the cause as yet."
fixes 2 warnings...
Use of uninitialized value in pattern match (m//) at /usr/share/koha/bin/cronjobs/overdue_notices.pl line 659.
Use of uninitialized value in pattern match (m//) at /usr/share/koha/bin/cronjobs/overdue_notices.pl line 670.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This patch use DataTable, see BUG|BZ 6836
- css/datatables.css
- lib/jquery/plugins/jquery.dataTables.min.js
- js/datatables.js
http://bugs.koha-community.org/show_bug.cgi?id=7167
Bug 7167 follow-up
Major changes:
* creating database tables for update on the fly, the 1st time the update script is called
* version is checked on mainpage.pl (and here only). If syspref Version differ from kohaversion.pl, the old updatedatabase is launched. If there are updates missing from new mechanism, the updatedatabase page is reached
* kohaversion check on each page is now useless in Auth.pm, removed dead code
* Updated installer: at the end of the process, retrieve all updates and automatically mark them "OK", as they're included in installer
Minor changes:
* adding copyright
* adding poddoc
* updating a warning, for better clarity
* switching from $$var to $var->
* small TT glitch fixed in updatedatabase.tt
* about.pl now returns the Version systempreference PLUS all the patches that have been applied
Bug 7167 follow-up perlcritic & numbers display & partial apply depending on DEBUG
* add use strict to updatedatabase, that is now perlcritic compliant
* partial apply of DB revs is now managed by DEBUG env variable = if DEBUG=0, the user can just apply every DBrev. If DEBUG=1, we're in a dev env, the user know has the option to apply DBrevs one by one
Display:
* in updatedatabase, small spelling changes
* in about.pl, remove 0 just after . (3.06.01 is displayed as 3.6.1)
* improve the display of applied numbers on about.pl
- before this patch, if you have N, N+1, N+2, N+3 and N+10 DB rev applied, about was displaying : , N+1 / N+2 / N+3 / N+10
- after this patch you have N......N+3 / N+10
* add ORDER BY into list_versions_already_knows to have number retrieved in the same order whatever the order they are applied
http://bugs.koha-community.org/show_bug.cgi?id=6679
Signed-off-by: Chris Nighswonger <cnighswonger@foundations.edu>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Chris Nighswonger <cnighswonger@foundations.edu>
Bug 7167: Improve the update.pl script
* Added CLI options to update.pl
* Call update.pl from the installer.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Chris Nighswonger <cnighswonger@foundations.edu>
Bug 7167: Now, we check versions on mainpage.pl and after login
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Chris Nighswonger <cnighswonger@foundations.edu>
Bug 7167: Reimplementing Marcel's suggestions & fixes
* Fixing the bugguy old version check (that was made against 3.0900000 instead of 3.0900027 -the last current kohaversion number
* in the CLI script, if there is nothing to report, just say it
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Bug 7167: Remove check_coherency
As suggested by Katrin, we've removed the call to check_coherency. It intended to provide readable comments when some SQL was wrong. Removing this sub result in the SQL error being displayed. That's OK because the sysadmin or the developer can google the error, understand it, then fix it.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Chris Nighswonger <cnighswonger@foundations.edu>
Bug 7167: Changing in .sql parsing
We first split on delimiter and then extract comments. You can now put
\n for delimiter comments.
ex:
DELIMITER ;
-- this is a comment
SELECT * FROM my_table;
-- another comment
Before this patch, we had to write:
DELIMITER ;
-- this is a comment;
SELECT * FROM my_table;
-- another comment;
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Chris Nighswonger <cnighswonger@foundations.edu>
Bug 7167: Add .pl and .sql examples
Those files are in version directory, so will never be executed by the updater
If you want to provide an update, do it in a 3.09/ directory (if your update is expected for 3.10 version)
Note that the updater use a md5sum checker. So, if the same update is in 2 different places, it will be detected. That will be handy for changes made on both stable and master: a library running stable will get the update when updating. When upgrading to the next major release, Koha will detect the patch has already been applied, and no error will be thrown. With the previous mechanism, a DBRev ported to stable was re-executed when upgrading to master, resulting in a nasty (but usually harmless) error message
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Chris Nighswonger <cnighswonger@foundations.edu>
Bug 7167: Improve display + factorize get_queries
Despite it's size, this patch is dealing with display questions only:
* The text "comments" and "queries" was hardcoded in ajax-updatedb-getinfo.pl script. It has been replaced by a JSON call, returning 2 separate values, "comments:" and "queries:" is now in the template, making it translatable
* Some minor tweak in the display (like putting things in bold, displaying OK in green, warnings in yellow and KO in red)
* Reordering the column headers for more readability:
* Status column is merged with availability, column is after status
* Status/availability terms more clear: "Not applied" instead of "unknown", "Applied and OK", "Applied and failed", "Applied and forced" are the 3 other statuses
* Removed one click to display comments on DBREv not yet applied: before the patch, one had to click "Show details", then "Get comments", now, "Get comments" is enough
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Chris Nighswonger <cnighswonger@foundations.edu>
Bug 7167: FIX typos & moving a script to a proper place
* renamed availables to available
* renamed already_knows to already_applied
* fixed FSF & copyright headers
* removing a "use strict" because we already had use Modern::Perl
* fixed a tiny typo in about.tt
* moving update.pl to misc/bin because it's a CLI script
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Chris Nighswonger <cnighswonger@foundations.edu>
Bug 7167: Add dependency File::Find::Rule
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Chris Nighswonger <cnighswonger@foundations.edu>
Bug 7167: We want to execute non-numeric version with the -all option
Dealing with Marcel comment 100:
> Note that the current code around line 52/53 does not
> handle that correctly:
> Argument "\x{74}\x{65}..." isn't numeric in numeric ge (>=) at
> installer/data/mysql/update.pl line 52.
Now, a non-numeric DBRev will be applied if you provide the --all parameter, without throwing the error
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Chris Nighswonger <cnighswonger@foundations.edu>
Bug 7167 reindentation & removing dead code
* The if (! defined $ENV{PERL5LIB}... block was wrongly intented
* The 3 lines running update.pl are useless: the update (new mechanism) is run from admin/updatedatabase.pl script. This part of install.pl is run only when you have "old style" DB revisions.
Summary:
* old mechanism = it's run as previously, by reaching the installer/install.pl?step=3 page, that applies all revisions
* new mechanism = when you log-in or reach mainpage.pl, you reach admin/updatedatabase.pl, where you can see what will be run, and run it
Tiny side effect = the check for old mechanism is now done *after* authentification (thus it's not done on each page call). It means that the user will have to enter login/password twice :
* first to log-in to Koha
* second to run installer/updatedatabase.pl?step=3
As the old mechanism is deprecated, we can expect this will happend only a few time in the history of a setup, it's not a big deal.
Signed-off-by: Chris Nighswonger <cnighswonger@foundations.edu>
Bug 7167: Don't raise an error in routine TableExists
Signed-off-by: Chris Nighswonger <cnighswonger@foundations.edu>
Bug 7167: FIX merge
Signed-off-by: Chris Nighswonger <cnighswonger@foundations.edu>
Bug 7167: Add .pl and .sql examples
Those files are in version directory, so will never be executed by the updater
If you want to provide an update, do it in a 3.09/ directory (if your update is expected for 3.10 version)
Note that the updater use a md5sum checker. So, if the same update is in 2 different places, it will be detected. That will be handy for changes made on both stable and master: a library running stable will get the update when updating. When upgrading to the next major release, Koha will detect the patch has already been applied, and no error will be thrown. With the previous mechanism, a DBRev ported to stable was re-executed when upgrading to master, resulting in a nasty (but usually harmless) error message
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Chris Nighswonger <cnighswonger@foundations.edu>
Bug 7167 follow-up fix POD syntax to please koha-qa.pl
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This patch makes the script read those parameters from the corresponding
$KOHA_CONF file.
Regards
To+
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Output of of the overdues script with -csv now contains country
from the first address in the patron account.
I checked output for 2 patrons, one with and one without country
in the patron's address.
All tests pass. Perlcritic fails before and after:
"require" statement with library name as string at line 29, column 12.
Use a bareword instead. (Severity: 5)
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Replace \r with \n for newline in output for bulkmarcimport.pl
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Fixed minor conflict in C4/Installer/PerlDependencies.pm
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This development will add the ability for a new patron to register
himself or herself. The self-registration will attempt to match this
newly inputted data to any existing patrons and if any possible matches
are found, ask if the patron is sure he or she doesn't already have an
account at the library. A system preference may be set to prevent patron
self-registration if the system detects the possibility that the person
may already have an account.
Once the patron has registered, passing a captcha (or similar
bot-stopper), the patron will then be optionally verified a second time
via email. At this point, the patron will be able to print a temporary
library card (optional by system preference), and will be provided any
details necessary to access electronic resources (this body of text
would be a template in the slips and notices system). At the library's
choice, this new patron would either be set to a temporary patron status
(patron type set via system preference), or a fully-fledged patron
(allow patron type to be determined by age and/or other attributes).
Assuming the library uses temporary patron types for OPAC registrations,
this patron will next enter a queue and would need to physically enter
the library to verify himself and become a fully-fledged patron (most
likely by bringing in physical proof of address, etc.). The librarian
would look up the patron record and modify the patron type. If a
temporary patron has not been verified within a certain time frame
(defined by a system preference), the patron record will be deleted
from the system via a cron job.
For registered patrons, the system will allow each person to also
update his or her personal data via the OPAC. When a patron updates his
or her information, the changes will be entered into a queue to be
verified by a librarian (preventing a patron from inputting obviously
bogus data). The staff client home page will display the number of
patron records with changes awaiting approval. A librarian would then be
able to click through a list of modification requests, and approve or
deny each (with approval and denial alerts being sent to the patron via
the standard messaging system).
NEW SYSTEM PREFERENCES
* PatronSelfRegistration
* PatronSelfRegistrationDetectDuplicates
* PatronSelfRegistrationVerifyByEmail
* PatronSelfRegistrationPrintTemporaryCard
* PatronSelfRegistrationUseTemporaryStatus
* PatronSelfRegistrationExpireTemporaryAccountsDelay
NEW NOTICE
* Verify by email notice
NEW SLIP
* Temporary card slip
NEW CRON JOB
* delete_expired_opac_registrations.pl
- Deletes patrons that have not been upgraded from the temporary
status within the specified delay
* delete_unverified_opac_registrations.pl
- Deletes the unverified patrons based on the length of time specified
in the PatronSelfRegistrationExpireTemporaryAccountsDelay
The patron will register from self_registration.pl, linked off opac-main.pl if enabled. The registration page will be translatable to other languages in the same way that existing templates are.
Test Plan:
1) Enable PatronSelfRegistration
2) Set PatronSelfRegistrationExpireTemporaryAccountsDelay to a number
of days
3) Create a self-registered borrower category
4) Set PatronSelfRegistrationUseTemporaryStatus
5) Set PatronSelfRegistrationVerifyByEmail to "Don't require"
6) Go to OPAC, log out if logged in.
7) You should see the "Register here" link below the login box
8) Attempt to register yourself
9) Verify you can log in with your temporary password.
10) Set PatronSelfRegistrationVerifyByEmail to "Require"
11) Attempt another self-registration
12) Check the messages table, you should see a new message with a
verification link.
13) Copy and paste the link into a web browser to verify the registration
14) Log in with the given credentials to verify the account was created.
Test Plan - Part 2 - Borrower Modifications
1) Log in to OPAC, go to "my personal details" tab.
2) Make some modifications to your details.
3) Repeat steps 1 and 2 for two more borrowers.
4) Log in to Koha intranet with a user that can modify borrowers.
5) At the bottom of mainpage.pl, you should see:
Patrons requesting modifications: 3
6) Click the link
7) Approve one change, deny a different one, and ignore the third, then
submit.
8) Check the records, you should see the changes take affect on the
approved one, and no changes to the other two. You should also see
"Patrons requesting modifications: 1" at the bottom of mainpage.pl
now.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Bug 7067 - OPAC Borrower Self Registration - Followup
* Rename PatronSelfRegistrationUseTemporaryStatus to PatronSelfRegistrationDefaultCategory
* Hide register link unless PatronSelfRegistrationDefaultCategory is set.
* Add invalid token page
* Add documentation and switches to cron scripts
* Add required fields check for editing exiting patrons
* Don't force require email address for existing patrons when
PatronSelfRegistrationVerifyByEmail is enabled.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Passed-QA-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This patch fix a typo that prevented report to be run
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Due to a limitation of Zebra, the register must be cleared *before*
doing shadow indexing if you want to reset the indexes. In light of
that, it does not make sense to do shadow indexing at all when
rebuild_zebra.pl is run with the -r switch. This patch makes -r (reset)
imply -n (no shadow).
To test:
1) Run `rebuild_zebra.pl -b -r -v -v -v`
2) Note that the script never runs the merge phase
Without the patch I see log lines refering to the shadow cache (enabling shadow spec=/home/koha/koha-dev/var/lib/zebradb/biblios/shadow:20G)
With the patch I don't see anything in the logs about shadow. I do however see lines about merging. I think it could just be a misunderstanding of the logs
Signed-off-by: wajasu <matted-34813@mypacks.net>
Signed-off-by: Elliott Davis <elliott@bywatersolutions.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
[This patch was split out from tcohen's excellent patches for bug 8519
--jcamins 2012/10/31]
Added a new koha-index-daemon-ctl.sh script that uses the
'koha-index-daemon' provided by Koha::Contrib::Tamil (install via CPAN)
to process the indexing queue ('zebraqueue' for now, 'indexqueue' in the
future I guess :-P).
This script could be easily modified in the future for using another
index queue processing script (a more abstract indexing script for both Solr
and Zebra, etc). I removed all zebra-ish stuff from it.
Documentation patches will be provided as followups, once Mark Tompsett's
docs are pushed to avoid continous rebasing.
Tested to work on an up-to-date Ubuntu 12.04.
Sponsored-by: Universidad Nacional de Córdoba
Signed-off-by: wajasu <matted-34813@mypacks.net>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This allows the --framework option to be specified when running
bulkmarkimport. This option allows a framework code to be specified for
the records being imported.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
All tests pass, perlcritic fails before and after.
Tested
- imported records with -framework FA, FA framework is used
- imported records without -framework, default framework is used
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
If a subscription is no longer enough published (or we are not waiting
for a new periodical) we are allowed to close it.
If a subscription is closed, we are not able to receive or generate a
new serial.
On the serial module, we can now
- close a subscriptionn
- reopen a closed subscription
On serial search 2 tabs is displayed (opened and closed subscriptions).
This patch adds:
- a new field subscription.closed in DB
- a new status for serials (8 = stopped)
Test plan:
- search subscriptions
- close a subscription and check that you cannot receive or generate a
new serial
- launch another search and check that the closed serial is into the "closed"
tab.
- You are allowed to reopen a subscription on the subscription detail
page and on the subscription result page. A javascript alert ask you
if are certain to do this operation.
- Check the serial status "stopped" everywhere the status is
displayed (catalogue/detail.pl, serials/claims.pl,
serials/serial-issues-full.pl, serials/serials-collection.pl,
serials/serials-edit.pl, serials/serials-recieve.pl,
serials/subscription-detail.pl and opac-full-serial-issues.pl)
- The report statistics does not include the closed subscriptions if you
don't check the "Include expired subscriptions" checkbox.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 8782: Followup: add some minor modifications
- Show 'closed' information in biblio detail page
- Add a column in serials report table
- Search subscriptions on title words instead of string
- Prevent serials editing when subscription is closed
- Don't change status of "disabled" serials
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 8782 - Close a subscription - Followup - Fix updatedatabase.pl
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Signed-off by : Mathieu Saby <mathieu.saby@univ-rennes2.fr>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Previously we used the "delete" command in zebraidx, which fails when
you try to delete a record that doesn't exist in the index. By changing
to the "adelete" command, we can reduce the likelihood of a failed
delete causing ghost records. A symptom of this problem is the warning
message occasionally encountered when indexing from the zebraqueue,
"[warn] cannot delete record above (seems new)."
To test:
1) Add a recordDelete action for a record that does not exist to
zebraqueue in MySQL:
INSERT INTO zebraqueue (biblio_auth_number, operation, server) \
VALUES (999999999, 'recordDelete', 'biblioserver');
2) Run `rebuild_zebra.pl -b -z -v [-x]`.
3) Note that you do not get the message "[warn] cannot delete record
above (seems new)".
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Passed-QA-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Before this patch:
* misc/maintenance/fix_mysql_constraints.pl FAIL
pod FAIL
*** ERROR: unterminated B<...> in file misc/maintenance/fix_mysql_constraints.pl
forbidden patterns OK
valid OK
critic FAIL
"require" statement with library name as string at line 25, column 12. Use a bareword instead.
+ I add a die on the open statement
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Passed-QA-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Help: fix_mysql_contraints.pl -h
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Passed-QA-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
The script misc/cronjobs/smsoverdues.pl requires HTML::Template::Pro and
uses templates that do not exist in Koha. Since this has been true for
at least a year and a half, and no one is aware of anyone who is using
it, it seems prudent to remove the script so that no one is confused
and/or distressed by its non-functioning nature.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Passed-QA-by: Mason James <mtj@kohaaloha.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
[This patch was split out from tcohen's excellent patches for bug 8519
--jcamins]
It removes the obsolete zebraqueue_daemon.pl and koha-zebraqueue-ctl.sh
obsolete scripts too.
Several files are modified to address te removal/addition of these files.
I didn't run the install procedure as I was working on my laptop with a dev
setup, just set the symlinks. Now fixed things as proposed by wajasu
on comment #4. Any other suggestion please let me know.
Tested to work on an up-to-date Ubuntu 12.04.
Asked by wajasu, remove remaining obsolete zebraqueue stuff.
Sponsored-by: Universidad Nacional de Córdoba
Signed-off-by: wajasu <matted-34813@mypacks.net>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Passed-QA-by: Mason James <mtj@kohaaloha.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This script will remove these duplicate fines. To use, repeatably run this
script until there are no more duplicates in the database.
(fix_accountlines_rmdupfines_bug8253.pl)
Duplicate fines would happen if you upgraded to a 3.8 version that does not have the
bug8253 patch, and the misc/cronjobs/fines.pl is run. In 3.8 an upgrade to a more
granular date/time was not addressed for pre-existing fine entries and this script
removes the resulting duplicates. It also intelligently preserves the amount outstanding
for payments already applied. If your version already had the bug8253 patch at the time
of the upgrade, duplicate fines should not have been generatd.
Signed-off-by: wajasu <matted-34813@mypacks.net>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Modify /misc/translator/translate script in order to manage properly alternate
OPAC templates.
To test it with new 'ccsr' template:
- Create the .po file:
./translate create fr-FR
Result: existing .po files are not modified. A new fr-FR-opac-ccsr.po file is
available.
- Install all templates :
./translate install fr-FR
Result: A new koha-tmpl/opac-tmpl/ccsr/fr-FR directory contains translated
templates.
- Update .po files:
./translate update fr-FR
Result: fr-FR .po files are update, include fr-FR-opac-ccsr.po
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Simple addition of the koha user to the sample cron file. Might help non-tech
users to get things like incremental indexing to work.
Sponsored-by: Universidad Nacional de Córdoba
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
