Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
To test:
-1 Set the specify due date option to a date, don't check the checkbox
-2 Enter an unknown barcode
-3 Click on fast add
-4 Add a record
-5 Add an item (don't change the barcode!)
-6 The item is checked out to the patron
-7 Verify: The checkbox is "Remember for session" is checked now
-8 APPLY patch
-9 Do steps 1-6 again, this time "Remember for session" should be unchecked
-10 Do steps 1-6 again but this time do check the "Remember for session" checkbox.
-11 It should be properly checked
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch undefines the CNsubfields variable when the whole field is requested
Note that the substr returns '' when no characters are found, so we test if the string eq ''
Testing 'truth' doesn't work because "0" is a valid option
To test:
1 - Edit a record, add an 082 field
082 0 0 ‡aalpha‡bbeta‡0delta
2 - Set itemcallnumber system preference to 082
3 - Attempt to add/edit items
4 - ISE
5 - Apply patch, restart all the things
6 - Add/edit items - no error
7 - Confirm the itemcallnumber field is populated with "alpha beta delta"
8 - Set itemcallnumber system preference to '0820'
9 - Add/edit items
10 - Confirm itemcallnumber is populated with 'delta'
Signed-off-by: Salman Ali <salman.ali@inLibro.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
On bug 17591 we discovered that there was something weird going on with
the way we export and use subroutines/modules.
This patch tries to standardize our EXPORT to use EXPORT_OK only.
That way we will need to explicitely define the subroutine we want to
use from a module.
This patch is a squashed version of:
Bug 17600: After export.pl
Bug 17600: After perlimport
Bug 17600: Manual changes
Bug 17600: Other manual changes after second perlimports run
Bug 17600: Fix tests
And a lot of other manual changes.
export.pl is a dirty script that can be found on bug 17600.
"perlimport" is:
git clone https://github.com/oalders/App-perlimports.git
cd App-perlimports/
cpanm --installdeps .
export PERL5LIB="$PERL5LIB:/kohadevbox/koha/App-perlimports/lib"
find . \( -name "*.pl" -o -name "*.pm" \) -exec perl App-perlimports/script/perlimports --inplace-edit --no-preserve-unused --filename {} \;
The ideas of this patch are to:
* use EXPORT_OK instead of EXPORT
* perltidy the EXPORT_OK list
* remove '&' before the subroutine names
* remove some uneeded use statements
* explicitely import the subroutines we need within the controllers or
modules
Note that the private subroutines (starting with _) should not be
exported (and not used from outside of the module except from tests).
EXPORT vs EXPORT_OK (from
https://www.thegeekstuff.com/2010/06/perl-exporter-examples/)
"""
Export allows to export the functions and variables of modules to user’s namespace using the standard import method. This way, we don’t need to create the objects for the modules to access it’s members.
@EXPORT and @EXPORT_OK are the two main variables used during export operation.
@EXPORT contains list of symbols (subroutines and variables) of the module to be exported into the caller namespace.
@EXPORT_OK does export of symbols on demand basis.
"""
If this patch caused a conflict with a patch you wrote prior to its
push:
* Make sure you are not reintroducing a "use" statement that has been
removed
* "$subroutine" is not exported by the C4::$MODULE module
means that you need to add the subroutine to the @EXPORT_OK list
* Bareword "$subroutine" not allowed while "strict subs"
means that you didn't imported the subroutine from the module:
- use $MODULE qw( $subroutine list );
You can also use the fully qualified namespace: C4::$MODULE::$subroutine
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
There is a "debug" parameter we are passing from the controller scripts
to C4::Auth::get_template_and_user, but it's not actually used!
Test plan:
Confirm the assumption
Review the changes from this patch
Generated with:
perl -p -i -e 's#\s*debug\s*=\>\s*(0|1),?\s*##gms' **/*.pl
git checkout misc/devel/update_dbix_class_files.pl # Wrong catch
+ Manual fix in acqui/neworderempty.pl
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
The syspref NewItemsDefaultLocation is used to set a default value for item's location.
But it seems that there are some weirdness in the behaviour:
1. It's only used from additem. It seems that it should be used from acq and serial modules as well. And maybe for the items import too.
2. It set the location even if another one has been picked from the UI
=> We UI must preselect the syspref's value, but the controller must pick what has been selected on the UI
This patch is adding the default to the UI and extend the use of the
pref to other areas.
Test plan:
Set a value to NewItemsDefaultLocation
Catalogue a new item and confirm that the syspref's value is picked to
selected the default value on the add item form
Same behaviour should apply to the acquisition and serial modules
When importing items, the default location must be used if the imported
items did not have a location defined.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Sponsored-by: Orex Digital
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Sometimes additem.pl will complain about "Storable::thaw failed to
thaw LastCreatedItem-cookie.", see bug 14844. Now, actually fix the bug.
The bug is caused by trying to URI (un)escape MARC::Record, binary data.
We'll use a base64 url-safe version instead.
Test plan:
1: Set PrefillItem to 'The new item is prefilled...'
2: Set a SubfieldsToUseWhenPrefill, 'c' for example
3: Add a new item for biblio A with 'c' set.
4: Double check 'c' value is set for next new item A.
5: search and add a new item for biblio B
6: 'c' is not set
Apply patch
7: logout, login
8: repeat steps 3, 4, and 5 .
9: now 'c' is set.
Signed-off-by: Pasi Kallinen <pasi.kallinen@joensuu.fi>
Signed-off-by: James O'Keeffe <jamespfk@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
JD amended patch: fix commit title and add test plan
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Also adds syspref to optionally choose to embed item information in record when adding/editing bibliographic and item records.
Test plan:
1. Enable OAI-PMH and OAI-PMH:AutoUpdateSets sysprefs
2. Create a biblio record with 1 item with CCODE of NFIC
3. In Administration > OAI Sets configuration create a set and define
the mapping:
Field: 952, Subfield: 8, Operator: is equal to, Value: FIC
4. Run the build_oai_sets.pl script:
cd misc/migration_tools
sudo koha-shell <instancename>
./build_oai_sets.pl -i
5. Check what items are in the OAI set:
sudo koha-mysql <instancename>
select * from oai_sets_biblios;
6. Observe your bib from step 2 is not in the set
7. [ITEM EDIT] Edit the item to have CCODE of FIC repeat step 5 and observe biblio is still not in OAI set
8. [ITEM ADD] Add a new item with CCODE of FIC and repeat step 5 and observe biblio
still not in OAI set
9. [ITEM DELETE] Delete one of your 2 items and repeat step 5 and observe biblio still
not in OAI set
10. Apply patch, update database and restart plack (instruction below on
the latter 2 actions):
cd installer/data/mysql
sudo koha-shell <instancename>
./updatedatabase.pl
sudo koha-plack --restart <instancename>
11. Enable new syspref OAI-PMH:AutoUpdateSetsEmbedItemData
12. [ITEM ADD] Repeat step 8 and observe biblio is now in the OAI set
13. [ITEM EDIT] Edit both items to have a CCODE of NFIC and repeat step 5 and
observe bib now not in set
14. [ITEM EDIT] Edit one of the items to have CCODE of FIC and repeat step 5
and observe bib now in set
15. [ITEM DELETE] Delete all items off bib and repeat step 5 and observe bib
no longer in set
Sponsored-By: Catalyst IT
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch modifies additem.pl so that it can accept an itemnumber as
a single parameter.
To test, apply the patch edit items on a bibliographic record which has
one or more items.
- In the location bar, modify the URL so that it uses only the
itemnumber parameter, e.g.
/cgi-bin/koha/cataloguing/additem.pl?itemnumber=12345
The page should load the correct record's items.
- If you add the "op" parameter it should load the item for editing in
the form:
/cgi-bin/koha/cataloguing/additem.pl?itemnumber=12345&op=edititem
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Bob Bennhoff <bbennhoff@clicweb.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
When batch editing, 2 reindex calls are sent to ES/Zebra.
We can easily avoid that reusing the skip_modzebra_update (renamed skip_record_index)
Additionally we should only send one request for biblio, and we should
only do it if we succeed
As the whole batch mod is in a transaction it is possible to fail in which case
Zebra queue is reset, but ES indexes have already been set
In addition to the skip param this patchset moves Zebra and Elasticsearch calls to
Indexer modules and introduces a generic Koha::SearchEngine::Indexer so that we don't
need to check the engine when calling for index
The new index_records routine takes an array so that we can reduce the calls to
the ES server.
The index_records routine for Zebra loops over ModZebra to avoid affecting current behaviour
Test plan:
General tests, under both search engines:
1 - Add a biblio and confirm it is searchable
2 - Edit the biblio and confirm changes are searchable
3 - Add an item, confirm it is searchable
4 - Delete an item, confirm it is not searchable
5 - Delete a biblio, confirm it is not searchable
6 - Add an authority and confirm it is searchable
7 - Delete an authority and confirm it is not searchable
Batch mod tests, under both search engines
1 - Have a bib with several items, none marked 'not for loan'
2 - Do a staff search that returns this biblio
3 - Items show as available
4 - Click on title to go to details page
5 - Edit->Item in a batch
6 - Set the not for loan status for all items
7 - Repeat your search
8 - Items show as not for loan
9 - Test batch deleting items
a - Test with a list of items, not deleting bibs
b - Test with a list of items, deleting bibs if no items remain where all items are only item on a biblio:
SELECT MAX(barcode) FROM items GROUP BY biblionumber HAVING COUNT(barcode) IN (1)
c - Test with a list of items, deleting bibs if no items remain where some items are the only item on a biblio:
SELECT MAX(barcode) FROM items GROUP BY biblionumber HAVING COUNT(barcode) IN (1,2)
10 - Confirm records are update/deleted as appropriate
Signed-off-by: Bob Bennhoff <bbennhoff@clicweb.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
It defaults to 0 in get_template_and_user
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
We do a bit of refactoring to make the code reusable.
Test plan:
Same as the first patch but when adding/editing an item
QA note: There is a warning from the QA tools
FAIL koha-tmpl/intranet-tmpl/prog/en/modules/cataloguing/additem.tt
FAIL js_in_body
A <script> tag found inside head, must be moved to the body (see bug 17858)
I don't think how we could avoid it.
Sponsored-by: Orex Digital
Signed-off-by: Hugo Agud <hagud@orex.es>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
If an item is marked as found (ie. not itemlost) we need to refund the
patron.
Test plan:
Mark an item as lost to create a fee for the patron
Mark it as found from the cataloguing module and confirm that the patron
is refunded
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch modifies the code for parsing MARC framework configurations
so that the placeholder "<<YY>>" translates to a two-year date.
To test, apply the patch and modify a framework to include placeholders.
For example, in MARC21:
- Administration -> MARC structure -> 952 -> Edit subfields -> d
- Expand "Advanced constraints" and add a default value:
<<YYYY>> <<YY>> <<MM>> <<DD>> <<USER>>
- Save your configuration and go to Cataloging.
- Go to the add/edit items page for a record which uses the framework
you edited.
- In the "Add item" form, in the "Date aquired" field, you should see
the correct values. For example: '2019 19 12 03 Leonard'
Perform the same test when adding an item during the Acquisitions
process (depending on your AcqCreateItem setting).
Note that acqui/neworderempty.pl has been modified because the
placeholder-replacement code is repeated there, but I couldn't discover
how to test it (if it is used at all?)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Test Plan:
1) Configure Claimes Returned
2) Apply this patch
3) Go to additem.pl for that item
4) Note the claims returned lost status does not show in the lost status pulldown
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
When editing items, the table at the top contain several columns that
have date values, but they cannot be sorted by dates correctly.
Test plan:
Have several items with different dates in columns that contain dates,
like items.dateaccessioned, items.datelastseen)
Sort the column and confirm that with this patch the lines are sorted
correctly
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Same as the precedent patch for a single item deletion (vs delete all
items)
Item is returned if deletion successful, not 1
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
To test:
1 - Have a record with some items
2 - Click 'Delete all' under 'Edit'
3 - Confirm deletion
4 - Note you are redirected to additem.pl
5 - Add an item
6 - Apply patch
7 - Delete all items again
8 - Note you are redirected to detail.pl
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Issue description:
- call to ModZebra was unconditional inside 'store' method for Koha::Item,
so it was after each item added, or deleted.
- ModZebra called with param biblionumber, so it is the same parameter
across calls for each items with same biblionumber, especially when we
adding/removing in a batch.
- with ElasticSearch enabled this makes even more significant load
and it is also progressively grows when more items already in DB
Solution:
- to add extra parameter 'skip_modzebra_update' and propagate it down to
'store' method call to prevent call of ModZebra,
- but to call ModZebra once after the whole batch loop in the upper layer
Test plan / how to replicate:
- make sure that you have in the admin settings "SearchEngine" set to
"Elasticsearch" and your ES is configured and working
( /cgi-bin/koha/admin/preferences.pl?op=search&searchfield=SearchEngine )
- select one of biblioitems without items
( /cgi-bin/koha/cataloguing/additem.pl?biblionumber=XXX )
- press button "add multiple copies of this item",
- enter 200 items, start measuring time and submit the page/form...
On my test machine when adding 200 items 3 times in a row (so 600 in
total, but to show that time grows with every next batch gradually):
WHEN ElasticSearch DISABLED (only Zebra queue):
- 9s, 12s, 13s
WHEN ElasticSearch ENABLED:
- 1.3m, 3.2m, 4.8m
WITH PATCH WHEN ElasticSearch ENABLED:
- 10s, 13s, 15s
Same slowness (because also same call to ModZebra) happens when you try
to delete all items ("op=delallitems"). And same fix.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Wrong replacement in additem.pl
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Starting to replace the ModItem calls with Koha::Item->store
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch fixes the formatting of dates on the following pages:
- catalogue/MARCdetail.pl (staff)
- cataloguing/additem.pl (staff)
- opac-MARCdetail.pl (opac)
To test:
1) Ensure that the following fields are visible in the opac, intranet
and editor. You may need to edit the subfields in your default
bibliographic framework
952$d date accessioned
952$q date due/on loan
952$r date last seen
952$s date last borrowed
952$w replacement price date
Also ensure you have dateformat system preference set
2) Go to cataloguing/additem.pl for a biblio. Fill in the fields above
if required. Save
3) Remain on cataloguing/additem.pl. Notice the items table at the top
of the page, the dates are in the generic yyyy-mm-dd format
4) Go to catalogue/MARCdetail.pl for that biblio. Notice dates in wrong
format
5) View this biblio in the opac opac-MARCdetail.pl. Scroll to bottom to
items table. Notice dates in wrong format.
6) Apply patch, restart memcached and plack and refresh pages
7) Dates should now be formatted according to dateformat preference
8) Confirm that changing the preference changes the format of the dates
Sponsored-by: Catalyst IT
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This fix permits to add an "Important" option to the marc structure pages.
Testing:
1) Apply the patch
2) Run updatedatabase.pl
3) Regenerate CSS
4) Define 100 as an "important" field ( Administration » MARC bibliographic framework » MARC structure ( Default Frameword) » Edit )
5) Define 100$a as an "important" subfield (Administration » MARC bibliographic framework » MARC structure (Default Frameword) » Subfield » Onglet a)
6) Edit a record to clear the field 100 (subfields are all blank)
7) Save the record.
8) Validate the following message:
A few important fields are not filled:
* tag 100 subfield a Nom de personne in tab
* Field 100 is important, at least one of its subfields should be filled.
Are you sure you want to save?
Sponsored by the CCSR ( http://www.ccsr.qc.ca )
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Note that we change both cataloguing/additem.pl and C4/Items->PrepareItemrecordfordisplay
I can find no code that uses callnumber from the C4/Items sub, except for the itemrecorddisplay script
which is not called with an itemnumber from Koha and should be deprecated for REST or ILSDI or OAI (imho)
To test:
1 - Define itemcallnumber syspref as "082ab,092ab,9520,245a"
2 - Find a record with no items
3 - Ensure it has no 082 field, but an 092 field
4 - Go to add an item - itemcallnumber is empty
5 - Apply patch
6 - Go to add item, itemcallnumber should be the 092ab fields
7 - Delete the 092 field
8 - Go to add item, itemcallnumber should be the 245a
9 - Edit the callnumber to be "testing" and save item
10 - For should now show itemcallnumber="testing" as default
11 - Browse to http://localhost:8081/cgi-bin/koha/services/itemrecorddisplay.pl?itemnumber=## subbing the correct itemnumber
12 - Ensure the callnumber is defaulting to testing
13 - delete the item you created
14 - browse to URL above - callnumber should now be 245 again
15 - Add an 092 field to record and ensure it is now default callnumber
16 - Add an 082 field, it should now be default
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
The MARC::Field as_string method can join multiple subfield using a delimiter, this simplifies the code here
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
When the itemcallnumber system preference is defined, the item add form
pulls data from the specified tag and subfield(s) to pre-populate the
call number field. This update makes it possible to build the
prepopulated callnumber from more than just the first two subfields.
To test, apply the patch and update the itemcallnumber system preference
so that it includes more than two subfields. For instance, "092abef"
- Edit a bibliographic record and populate the specified subfields.
e.g. subfield a -> "One", b-> "Two", e-> "Three", f-> "Four".
- Save the record and go to the add/edit items screen.
- The call number field should contain a string which contains each of
the subfields you populated, concatenated with spaces: "One Two Three
Four."
- Test with other numbers of subfields.
- Test with an empty itemcallnumber preference.
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
See the comment in the code for more information.
Test plan:
- Set autoBarcode to hbyymmincr
- Create an item and click on the barcode field
- A barcode prefixed by the homebranch is generated
- Click the "Add multiple copies of this item" and enter 4
- Save
=> Without this patch only the first item has the homebranch prefix
=> With this patch applied they all have a barcode in the same format
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch adds a select multiple when you add/edit an itemtype, creates functions to return itemtypes by library, and filters the options of itemtype select in additem
To test:
1) Apply this patch set
2) perl installer/data/mysql/updatedatabase.pl
3) In koha administration => item types, edit "Books" itemtype
CHECK => there is now a select multiple whith libraries at the bottom
4) select centerville and save
5) set centerville as current libary
6) search for any biblio in the catalog
7) click on "edit items"
CHECK => book item type is present
8) set any other libary as current library
SUCCESS => book item type is not present
9) Sign off
Sponsored-by: Northeast Kansas Library System
Sponsored-by: Southeast Kansas Library System
Sponsored-by: Central Kansas Library System
Signed-off-by: Jessica Zairo <jzairo@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
To prevent additem.pl to crash when called with a nonexistent
biblionumber we are here implementing the blocking_error.inc trick to
display a friendly message instead.
Can't call method "fields" on an undefined value at
/home/vagrant/kohaclone/cataloguing/additem.pl line 736.
Test plan:
hit
/cataloguing/additem.pl?biblionumber=
/cataloguing/additem.pl?biblionumber=424242
You will get a friendly "Bibliographic record not found." message,
instead of a 500
Signed-off-by: Bin Wen <bin.wen@inlibro.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Since
commit 1253975389
Bug 21091: Move add item template JavaScript to a separate file
items cannot longer be edited when receiving an order.
When moving the code to the JS file, the JS variable "opisadd" was
always set to "true":
var opisadd = '[% opisadd | html %]';
Even if the TT variable is 0, opisadd will be "0", which is evaluated to
true in Javascript
To clean the situation it is easier to remove this variable and use "op"
instead.
Test plan:
- Make sure acqcreateitem is set to "when placing an order"
- Create a basket with some orders
- Close the basket
- Go to your vendor and receive an order
- On the receive page, try to edit your item
=> Without the patch, the pop up page will open and then close, not allowing the item to be edited.
=> With this patch applied you will see the item edit form. Save and
confirm that the parent window is updated with the new value (actually
it's refreshed)
Signed-off-by: Claire Gravely <claire.gravely@bsz-bw.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
To test:
1. Add multiple copies of an item with data in the 'Copy number' field. Note that tha data will be identical for all items.
2. Apply patch.
3. Add multiple copies of an item with a positive integer (ie. only digits) in the 'Copy number' field. Note that the copy number is incremented for each item.
4. Add multiple copies of an item with some other type of data in the 'Copy number' field. Note that the copy number field remains unchanged for the added items.
Signed-off-by: Pierre-Marc Thibault <pierre-marc.thibault@inLibro.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Note: This is here for information purpose, feel free to test it if you
wan to play with it.
TODO: C4::Reserves::_get_itype is not longer in use
No more GetItem must be returned by:
git grep GetItem|grep -v GetItemsAvailableToFillHoldRequestsForBib|grep
-v GetItemsForInventory|grep -v GetItemsInfo|grep -v
GetItemsLocationInfo|grep -v GetItemsInCollection|grep -v
GetItemCourseReservesInfo|grep -v GetItemnumbersFromOrder|grep -v
GetItemSearchField|grep -v GetItemTypesCategorized|grep -v
GetItemNumbersFromImportBatch|cut -d':' -f1|sort|uniq
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
In several places we escape quotation marks using
$value =~ s/"/"/g;
All the occurrences are wrong and must be removed.
Most of them are leftover of bug 11638 (Remove HTML from
addbiblio.pl), which removes the construction of html from pl scripts.
The problem has been highlighted by bug 13618, I did not track down why
the issue did not exist before (?)
Test plan:
0/ Use strings with quotation marks, like:
'Fiddle tune history : "bad" tunes'
You can also use other html characters to make the tests more complete,
like 'Fiddle tune history : <"bad" tunes>'
1/ authorities/authorities.pl
a. Edit an authority filling different fields with quotation marks
b. Edit it again
=> The display (inputs' values) is wrong, if you save the escaped quotes
will be inserted
2/ cataloguing/addbiblio.pl
Same editing a bibliographic record
3/ cataloguing/additem.pl
Same editing items
4/ members/memberentry.pl
Edit a patron's record and fill some fields with quotation marks
+ fields borrowernotes and opacnotes
=> The quotes are inserted directly in DB (escape is done before the
insert!)
5/ opac/opac-review.pl
For QA only: $js_ok_review is never used
6/ tools/batchMod.pl
For QA only: $value is always undefined at that point
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
- Added missing GetHiddenItems parameter change case
Without this prove t had a failure.
- Always use mocks, not set_preference
- Tweaks so t/db_dependent/00-strict.t passes
There was a typo botcat vs borcat and borrowernumber was never
defined. Grabbing from userenv, like other code does.
- Tweak t/db_dependent/Items.t to fully test changes
This will test all the if structures fully in GetHiddenItemnumbers.
prove t/db_dependent/Items.t
- Tweak borrower category code
$borrower->{categorycode} on a Koha::Patron is not the
same as $borrower->categorycode. Fixed error.
- Search was returning URLS for wrong interface
There was one search context place wrong. Changed it to $is_opac
as the logic for setting $is_opac was modified correctly.
- Corrected issues with category code.
When a user isn't logged in, $borrower is undef and causes error
when determining category code. Added conditional check.
- Properly trigger all changes in C4/Search.pm
- Fix QA Test tool failures
C4/Search.pm had some tabs.
- Add some commenting to make sense of logic
- Refactor EmbedItemsInMarcBiblio parameters to hashref
- Trigger GetMarcBiblio's EmbedItemsInMarcBiblio call.
prove t/db_dependent/Items.t
- Add missing test to trigger Koha/BiblioUtils/Iterator change
- Add borrower category overrides
These files generally add borcat parameter to GetMarcBiblio.
Others might include correction of filtering of items
(opac-basket), or a comment as to why no changes were done
(opac-search).
In the case of opac-search, correcting the first FIXME will
likely correct the OpacHiddenItems issues on tags. As such,
that is beyond this bugs scope.
Some code had loop optimizations and fixes made, like a
'next unless $record' when the biblio shouldn't even be in
the list.
- Modify opac-ISBDdetail and opac-MARCdetail
Both files had similar logic. They were rearranged and
optimized, so that both files would have practically identical
initial blocks of code.
Optimizations were possible, because GetMarcBiblio
returns a filtered record, so that there is no double call
(once in the opac-### file and once in GetMarcBiblio) to
GetHiddenItemnumbers.
- Fix hiding in opac-tags
opac/opac-tags.pl was not properly hiding.
There is currently one known bug associated with tags left.
If you have two biblios tagged by different people with the
same tag, the opac-search will show the one you tagged that
is supposed to be hidden, because tag searches work differently
than regular searches. This is beyond the scope of this bug.
See the FIXME's in opac/opac-search.pl
- Trigger the C4::ILSDI::Services changes
prove t/db_dependent/ILSDI_Services.t
- Added missing 'my'
- Test C4/Labels/Label.pm changes
- Improve C4::Record::marcrecord2csv test cases
- Corrected opac-details searchResult call
- Fix breaking issues constraint in ITerator test
- Fix ILSDI_Services test when clubs with branch exist
- Rebased again!
- Rebased t/db_dependent/Items.t conflict.
The test plan is in comment #112 last I checked.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Those calls to C4::Items::GetItemnumbersForBiblio can be replaced with
my @itemnumbers = Koha::Items->search({ biblionumber => $biblionumber})->get_column("itemnumber")
Test plan:
- Use the GetAvailability service of ILS-DI
- Try to place a hold on an item that is available and another one
- Use the batch record deletion tool to remove record with and without items.
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Those calls to C4::Items::GetBarcodeFromItemnumber can be replaced with
my $barcode = Koha::Items->find($itemnumber)->barcode;
But if we are not sure that the item exists, we should test the return
of ->find before ->barcode
Test plan:
- Edit an item
- Check an item in
- Test SIP - I do not really know how to trigger that code, apparently
misc/sip_cli_emulator.pl does not deal with holds. Any ideas?
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
The code assumed that if a subfield is marked as mandatory, there should be no
empty entry in the pull downs.
This assumption is not correct, as it leads to the first entry of the
pull down being preselected if there is no default set. Which means you
will never be alerted of any cataloguing errors and errors will be very
hard to find later on.
Correct behaviour would be to preselect the empty value when there is
no default. This means on saving the item an error message is triggered
and the cataloger is forced to set the value.
To test:
- Adapt your frameworks:
- Make 942$c non-mandatory
- In 952 make itemtype, classification source and some other pull downs
like location or collection mandatory
- Add a new item
- Verify that the first value of each pull down is preselected,
there is no way to trigger the 'required' error
- Apply patch
- Add a new item
- Verify that classification source is preselected according to the
DefaultClassificationSource system preference
- Verify that the itemtype is preselected according to 942$c in
the bibliographic record
- Verify all mandatory fields can be set to empty
- Verify that you can't save before correctly setting them
- Change the 942$c in the record to empty
- Add another item
- Verify the itemtype is now empty
- Change your frameworks and set a default for itemtype (Ex: BK)
- Repeat default check with another pull down like collection or location
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
We do not want empty values for branches (holdingbranch and homebranch
must be mandatory, see bug 21011)
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
There is a "max length" value you can define at framework level to
limit the size of the input. But it is not taken into account on the
add/edit item form.
It is a regression that has been introduced by
commit 47d2de9c02
Bug 12176: Remove HTML from additem.pl
max_length vs maxlength
Test plan:
- Define a maximum length for an item subfield
- Add or edit an item
=> Without this patch the maxlength attribute of the inputs are not
defined (maxlength="")
=> With this fix you will see the maxlength attributes correctly set
with the value you defined in the framework
Note:
We could/should set this value to the size of the DB column when mapped
For instance 952$u is mapped with items.uri, which is a varchar(255).
This length restriction should done at framework level
Signed-off-by: Pierre-Luc Lapointe <pierreluc.lapointe@inLibro.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
If you do not use the EasyAnalyticalRecords feature (introduced with
bug 5528), you will have a lot of warnings in zebra-output.log like:
zebrasrv(1096) [request] Search biblios ERROR 114 1 1+0 RPN @attrset Bib-1 @attr 1=8911 259186
They come from C4::Items::GetAnalyticsCount called by catalogue/detail.pl.
This sub starts a Zebra search on index 'hi' (Host-Item-Number).
If you do not use this field at all (related to 773$9 in MARC21), Zebra
returns an Unsupported Use attribute error (114).
In making this change, I added one minor change:
[1] Remove the commented GetAnalyticsCount in additem.pl and correcting
indentation in that loop (removing tabs). So no change at all there.
NOTE: I will propose to bind the GetHostItemsInfo call in detail.pl and two
other scripts to this preference too on report 20702.
Test plan:
[1] If you use EasyAnalytics, verify that there is no change.
[2] If you do not, check the zebra-output.log. You should no longer see
searches for Host-Item-Number with 1=8911. (As well as ERROR 114 on
this index.)
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Charles Farmer <charles.farmer@inLibro.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
