Check that mandatory tags and subfields are correctly required when
editing an authority record.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Test that preference search term highlighting works correctly.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
To test:
-Go to Administration > Authorized values
-In any category, new or existing, look at an authoized value.
-The description and OPAC description inputs both have a maxlenght of 200 but you cannot see very many characters.
-Apply patch
-Look again, the inputs are much bigger and you can see many more characters.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
To test:
1- Before applying the patch add some content to the system preference
OpacMoreSearches
2- Apply patch
3- restart_all and updatedatabase
4. Go to additional-content.pl ( HTML customizations )
5. You should now see your content from the system preference under
OpacMoreSearches in HTML customizations
6. Try searching for the system preference, OpacMoreSeaches. It has been
removed and you should not be able to find it.
7. Try changing/removing/adding content from OpacMoreSearches in HTML
customizations
8. Make sure your edits are reflected when you look at the
OpacMoreSearch area in the OPAC.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
To test:
1. Do a Z39.50/SRU search
2. In the search results click on MARC to get the MARC preview. Choose
something with lots of MARC data so it is both wide and long.
3. See the Y axis scrollbar
4. You must scroll bottom of the modal to see the X axis scrollbar,
annoying.
5. Apply patch
6. Try steps 1-4 again. This time you should see the X axis scrollbar
without having to scroll to the bottom.
7. It's not a bad idea to test in multiple browsers.
Note: I also put the CSS onto multiple lines to increase readability
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
The checkbox should not appear if we are selecting a patron
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch adds a new cookie 'awalys_show_holds' and utlises it on request.pl
to determine if the existing holds table should be loaded.
If the cookie does not exist, the table is loaded to preserve exiting behaviour.
If the cookie exists and is set to 'DONT' a new button 'Show holds' is added to
the page to allow force loading the table
To test:
1 - Place some holds on a record
2 - Click 'Holds' tab or 'Place a hold' from details page
3 - Note search box to place hold and table of existing holds
4 - Apply patch
5 - Reload the holds page and note new checkbox 'Always show holds'
6 - Confirm the box is checked
7 - Uncheck it
8 - Reload the page and confirm holds do not automatically load
9 - Click the new 'Show holds' button
10 - Confirm the existing holds load, and that 'Always show holds' is unchecked
11 - Check 'Always show holds'
12 - Reload page and confirm holds don't show
13 - Uncheck the box, load holds for another record, confirm it remains unchecked
14 - Bring up browser console (F12)
15 - In 'Storage' tab, under 'Cookies', delete the cookie for 'always_show_holds'
16 - Reload holds page, confirm holds load and check box is checked
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Bug 29058: (follow-up) Add hold count and don't display show options if no holds
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
To test:
1 - see the current wording
2 - apply patch
3 - words are changed
Test to confirm accuracy of wording:
1 - set maxreserves to 1
2 - set all/all circ rule to unlimited holds allowed total, holds allowed daily, and holds per record
3 - confirm you can place 1 hold for a patron, but the second is blocked
4 - set maxreserves to 0
5 - confirm you can place and number of holds for the patron
6 - set maxreserves to blank
7 - confirm you can place any number of holds for the patron
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch:
- Adds a notice about the fee to be charged to the patron (staff and
OPAC)
- Adds the right UI description for ARTICLE_REQUEST_FEE debit types in
the UI.
To test:
1. Have some article request fee rules
2. Play with placing an article request in OPAC and staff
=> SUCCESS: You see a message about the fee
=> SUCCESS: The fees are correctly applied to the patron
3. Sign off :-D
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch adds a new circulation rule: article requests fee.
It can be set per library and category.
To test:
1. Try setting sdifferent numeric values, change, and delete them
=> SUCCESS: Things work as expected
2. Make sure rules are loaded correctly when re-entering the circ rules
page
=> SUCCESS: All good
3. Verify the data on the DB is stored as it should on each of your
tests:
$ koha-mysql kohadev
> SELECT * FROM circulation_rules \
WHERE rule_name='article_request_fee';
=> SUCCESS: All good (remember NULL => 'All' in the UI)
4. Sign off :-D
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This changes "collection code" to be "collection" as Koha displays
the collection description and no codes. This will also help to make
the GUI more consistent overall.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Fix YAML syntax of opac.pref, we must use dash for new lines.
Also removes duplicate text before syspref.
No need to say "code" since it is now a list of categories.
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
If you do not use a temporary self registration patron category,
you should actually make the preference
PatronSelfRegistrationExpireTemporaryAccountsDelay empty.
As the comment in sysprefs.sql already said, we should not let
a zero value in the pref delete patrons too.
The module is changed now, the test adjusted and
the description of both related sysprefs modified.
Test plan:
Run t/db_dependent/Members.t
Check in Administration the two adjusted OPAC pref descriptions.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Bug 28450, "Make Account summary print tables configurable," added
DataTables to the print summary view. The updated page includes the
wrong option:
"paging": "false",
It should be:
"paging": false,
Because DataTables expects that option to be boolean (true or false).
To test, apply the patch and check out to a patron who has more than 20
checkouts and more than 20 holds.
- From the toolbar, click Print -> Print summary.
- On the acount summary page, confirm that the "Items checked out" and
"Pending holds" tables show ALL entries, not just the first 20.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch makes 'Go to field' and 'Errors' strings translatable
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Same as bug 29394, we want the flatpickr instanciations be done at the
same place, from calendar.inc. That way they will all behave
identically.
Test plan:
Edit a patron category and confirm that the "until date" calendar has
the "yesterday" and "today" dates disabled
Place a hold on an item, go to the patron detail page, click the "holds"
tab, suspend.
That should trigger a modal that will display a calendar with
"yesterday" and "today" dates disabled
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
A Yes/No system preference must use 1 for Yes and 0 for No.
So "Send" for 1/Yes and "Don't send" for 0/No.
We add too much problems with double-negation boolean system preferences (such as dontmerge).
Previous patch changed default value to 1 in atomicupdate, do the same
in installer/data/mysql/mandatory/sysprefs.sql
Also to be consistant, sets options = NULL instead of '' in atomicupdate
Also removed useless added empty line in /misc/cronjobs/overdue_notices.pl
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
I took the same test plan as victor but I added the system preference to manage the case more easily, especially for users who do not have access to the koha server.
Test plan
1. Check the size of the message queue
With the following SQL query (using an SQL report if you want)
SELECT COUNT(*) FROM message_queue;
2. Run misc/cronjobs/overdue_notices.pl
3. Check the size of the message queue
To ensure that no other overdues will create noise in this test plan.
Or you can take them into account.
4. Choose a patron with no email address
5. Create an overdue (checkout an item and unfold "Checkout settings"
and set a date in the past which is compatible with what you find in
staff:/cgi-bin/koha/tools/overduerules.pl
6. Run misc/cronjobs/overdue_notices.pl
7. Check that you have two new messages in the queue
8. Inspect these two messages
SELECT * FROM message_queue ORDER BY time_queued DESC LIMIT 2 \G
1. One has the type "print" and the borrowernumber matching the patron.
2. The other has
subject: Overdue Notices
borrowernumber: NULL
message_transport_type: email
and contains "These messages were not sent directly to the patrons."
This is the one we don't want anymore.
Because it's now obsolete due to the first message.
9. Apply this patch
10. Run updatedabatase.pl
11. Change syspref 'EmailOverduesNoEmail' to "Don't send"
12. Delete data from message_queue (if you have access) for a cleaner view
13. Run again misc/cronjobs/overdue_notices.pl
14. Check that only the print message is now generated and not the
"Overdue Notices" one.
https://bugs.koha-community.org/show_bug.cgi?id=20076
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch updates the way the NumSavedReports preference value is used
on the saved reports page so that the setting is correctly incorporated
into the DataTable.
The patch also expands the description of the NumSavedReports preference
in order to clarify the expected behavior when no value is saved.
To test, apply the patch and go to Administration -> System
preferences and note the value of NumSavedReports.
- Go to Reports -> Use saved.
- Confirm that the first page of saved reports shows the number
specified in NumSavedReports.
- In the "Show" dropdown menu, confirm that the number from
NumSavedReports is preselected by default.
- Expand the dropdown menu to confirm that the NumSavedReports number
is positioned sequentially with the default values. For example, if
NumSavedReports = "78," the menu options should be
"10, 20, 50, 78, 100, All".
- Test with various values of NumSavedReports. A blank value should
result in the "All" option being selected. A non-numeric or
non-positive value should result in the default set of options being
used ("10, 20, 50, 100, All").
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch updates the patron notices list so that notices are shown in
a modal dialog instead of inline in the table. The "Resend" button is
shown in the modal window controls.
To test, apply the patch and locate a patron in the staff interface with
multiple sent notices.
- View the patron's "Notices" tab.
- In the table of notices, click one of the notice titles.
- A modal window should appear with the notice subject as the header
and the notice content in the main body of the modal.
- If the message has any other status than 'pending' there should be a
"Resend" button in the modal footer. Confirm that it submits the
form and resends the correct message.
- Try viewing multiple notices to confirm that the contents of the
modal are correctly updated for each message.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Step 1: Replace tabs with spaces and reindent. This patch should include
only whitespace changes. If you view the diff while ignoring whitespace
there should be no changes.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Same test plan as before
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
The rendering of SELECT elements is up to the browser.
But Bug 16123 CSS code 'style="padding-left: xx' doesn't work on modern browsers.
Based on the previous contribution, this fix replaces CSS style attribute with dashes, creating a leveled structure that should work with most browsers.
Tested on Linux Ubuntu with Firefox 94.0, Chromium 95.0.4 and Opera 81.0.1
TEST PLAN :
1. Go to the Administration module
2. Add a new budget (ie : Budget 2022)
3. Add a fund to this budget (ie : Book)
4. Add a sub-fund to fund Book (ie : Fiction)
5. Add another sub-fund, this time to sub-fund Book (ie : Adult fiction)
You will have this hierarchy :
Budget 2022
|____ Book
|_____ Fiction
|_____ Adult fiction
6. Go to the Acquisition module
7. Select a vendor and create a new basket
8. Place an order
9. Check the budget dropdown menu
BEFORE PATCH
Book
Fiction
Adult fiction
OR
Book
Fiction
Adult fiction
AFTER PATCH
Book
-- Fiction
-- -- Adult fiction
Co-authored-by: Didier Gautheron <didier.gautheron@biblibre.com>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
The rendering of SELECT elements is up to the browser.
But Bug 16123 CSS code 'style="padding-left: xx' doesn't work on modern browsers.
This patch replace CSS style attribute with   html entity.
On supported platforms
TEST PLAN :
1. Go to the Administration module
2. Add a new budget (ie : Budget 2020)
3. Add a fund to this budget (ie : Book)
4. Add a sub-fund to fund Book (ie : Adult fiction)
You will have this hierarchy :
Budget 2020
|____ Book
|_____ Adult fiction
5. Go to the Acquisition module
6. Select a vendor and create a new basket
7. Place an order
8. Check the budget dropdown menu
BEFORE PATCH
Book
Adult fiction
OR
Book
Adult fiction
AFTER PATCH
Book
Adult fiction
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Notes come from the biblio table, but that table is already used to fill in MARCNOTES through Biblio.pm and get_marc_notes.
Get_marc_notes does check for NotesToHide and already read every note on the records, but .notes doesn't go through that same filter.
I don't see the point of keeping notes as a condition when MARCNOTES does the same job but better.
To test:
1) Take any record, or create one
2) Input something in the 500 field (or 300 in UNIMARC)
3) In Systempreferences -> NotesToHide, fill in the number 500 (or 300).
4) Save, then go look at the record detail in the OPAC and admin website.
5) You should still see the 500 or 300 field under the Description tab.
6) Apply patch.
7) Reload the record detail page.
8) Observe the error is gone.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch makes the cataloging reservoir search results a configurable
DataTable. The empty edition and date columns are removed, and an import
data column is added.
To test, apply the patch and go to Cataloging.
- Perform a cataloging search which will return results from the
reservoir.
- The table of reservoir search results should be a DataTable with
paging, navigation, filtering, column configuration, etc.
- Confirm that all DataTable controls work correctly.
- Go to Administration -> Table settings -> Cataloging -> addbooks.
- Try modifying the default configuration and confirm that the
settings take effect.
Signed-off-by: Barbara Johnson <barbara.johnson@bedfordtx.gov>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch simply checks if we are callinmg from the plugin, and removes
two columns from the settings if so
To test:
1 - In Admin->Marc bibliographic framework got to Marc Structure for default framework
2 - Search for 856$u
3 - Set Plugin to upload.pl
4 - Edit a record in the default framework
5 - Under 856u, click 'Upload'
6 - Uplaod a file and then click 'Choose'
7 - nothing happens
8 - View consiole (f12) and see error
9 - Apply patch
10 - Reload the page
11 - No more error
12 - Click choose
13 - Record link is populated
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch adds a flag to the OPAC preferences file marking suggestion
title as mandatory OPACSuggestionMandatoryFields and excluded from
OPACSuggestionUnwantedFields.
The patch also modifies the markup around required fields in the OPAC
suggestion form to comply with changes made in Bug 27668 to mandatory
field styling.
To test, apply the patch and restart services.
- Test the OPACSuggestionMandatoryFields preference. In the modal,
"title" should be checked and the label in red. It should not be
possible to uncheck the checkbox.
- Test that the "Select all" and "Clear all" links don't affect the
"title" checkbox.
- Confirm that your selections are still saved correctly.
- Test the OPACSuggestionUnwantedFields preference. In the modal,
"title" should be unchecked and disabled.
- Test that the "Select all" and "Clear all" links don't affect the
"title" checkbox.
- Confirm that your selections are saved correctly.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch builds on the change introduced by Bug 22844, changing the
selection mode for the OPACSuggestionMandatoryFields and
OPACSuggestionUnwantedFields preferences to a modal.
This patch includes a database update for converting the format of the
saved values in these preferences. Previously the suggestions table
fields would be separated by a comma. Now they should be separated by a
pipe.
To test, apply the patch run the database update.
- Go to Administration -> System preferences.
- Search for 'OPACSuggestion.'
- The input fields for OPACSuggestionUnwantedFields and
OPACSuggestionMandatoryFields should appear as "locked" (read-only)
inputs.
- Clicking either input field should trigger a modal window with
checkboxes for each available column in the suggestions table.
- Test that the "select all" and "clear all" links work correctly.
- Test that the "cancel" link closes the modal without saving your
selections.
- Test that the "Save" button closes the modal, copies your
selections to the form field, and triggers the preference-saving
function.
- Test that changes to both preferences are correctly reflected in the
OPAC suggestion form.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
To test:
1. Go to Tools > HTML customizations
2. Open or create a new entry with CodeMirror. ( Edit with text editor )
3. CodeMirror doesn't work, you don't see line numbers or syntax highlighting
4. Apply patch
5. Try steps 1 & 2 again. The CodeMirror editor should now load.
6. Make sure it works in both the Default and English(en) tabs.
7. BONUS: install some other language packs and look at the tabs for that language, it should still work.
8. Try 5 and 6 again but with Additional contents (News) instead of HTML customizations
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
In addition to the Staff Client's home page, the number of pending
suggestions is also displayed in Home > Acquisitions. Currently,
these are only displayed if there are pending suggestions at the
logged in library. However, suggestions should always be displayed.
This follow-up patch fixes that, and also removes a template variable
(`suggestion`) that is no longer in use (removed as part of Bug 4331,
commit 70af459372).
Test plan:
1) Create a suggestion for Library A.
2) Go to Home > Acquisitions while logged in at Library B.
Without this patch, nothing is displayed regarding suggestions.
3) Apply this patch. Notice how suggestion information is shown, like:
"Manage suggestions: Library B: 0 / All libraries: 1"
If you change the library to Library A, you should get:
"Manage suggestions: Library A: 1"
Signed-off-by: Florian Bontemps <florian.bontemps@biblibre.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
The number of pending suggestions was only displayed if there are pending
suggestions at the logged in library.
Test plan:
Login at CPL
Create a suggestion (ASKED) for another library
=> Without this patch there is nothing on the mainpage
=> With this patch applied you will see info about pending suggestions:
"Suggestions pending approval: Centerville: 0 / All libraries: 1"
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: ThibaudGLT <thibaud.guillot@biblibre.com>
Signed-off-by: Andreas Roussos <a.roussos@dataly.gr>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Bug 24476 added autorenew_checkouts as a borrower column, intending it to be able to be
hidden if a library was not using the feature.
When the column chooser was added, this column was not included.
To test:
1 - Search system preferences for "BorrowerUnwantedFields"
2 - Click the box to change the value
3 - "autorenew_checkouts" is not an option
4 - Confirm that you see the option to opt patron out of autorenewal when editing patron on staff side
5 - Apply patch and restart everythign
6 - Search for the syspref again
7 - Note that now you can select "autorenew_checkouts"
8 - Check the box and save
9 - Confirm the opt out option is no longer visible during patron editing
Signed-off-by: Sally <sally.healey@cheshiresharedservices.gov.uk>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
To test:
1 To to Reports > Serials > Serials subscriptions and run the report while selecting a branch without subscriptions.
2 Notice console error
3 If you run the report for a branch WITH subscriptions it works just fine.
4 Apply patch
5 Do 1 again, no console error and show no see 'No entries to show'
6 Make sure it also works when you have a few subscriptions for a branch as well
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch adds an id attribute to the list item containing the "Show
fines to guarantor" information on the patron detail page in the staff
interface. This makes it consistent with the markup for the similar
"Show checkouts to guarantor" list item.
To test, apply the patch and view a patron's details in the staff
client. Inspect the source to confirm that the "Show fines to guarantor"
line has an id, "patron-privacy_guarantor_fines".
Alternatively, add this to the IntranetUserCSS system preference: #patron-privacy_guarantor_fines { background-color: pink; }
The line on the patron details page should be highlighted in pink.
Signed-off-by: Barbara Johnson <barbara.johnson@bedfordtx.gov>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch makes the patron page (detail and circulation) use the API to
suspend/resume holds on the holds tab.
It previously used the old svc/ scripts we plan to replace.
To test
1. Have a patron with some holds
2. Play with suspending/resuming holds. Include the indefinite
suspension.
=> SUCCESS: Everything works as usual
3. Apply this patch
4. Repeat 2
=> SUCCESS: Nothing changed, a soft breeze surprises you
5. Sign off :-D
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
The SQL report batch operations dropdown menu has divider list items
which add a border between sections (Bibliographic records, item
records, etc.). This element is redundant because the sections have
"headers" which also add a border.
This patch removes them.
To test, apply the patch and run an SQL report which will return results
that trigger the batch modification menu:
SELECT biblio.biblionumber , biblio.title, items.itemnumber,
items.itemcallnumber, items.barcode, borrowers.firstname,
borrowers.surname, borrowers.borrowernumber, borrowers.cardnumber
FROM issues
LEFT JOIN borrowers ON borrowers.borrowernumber=issues.borrowernumber
LEFT JOIN items ON issues.itemnumber=items.itemnumber
LEFT JOIN biblio ON items.biblionumber=biblio.biblionumber
ORDER BY RAND()
There should be no double border in the menu.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch ensures we're formatting the price values consistently for
the table total and the amount to pay input field.
Test plan
1) Add an item to charge at 0.10.
2) Add this same item 8 or 9 times (Do not use the 'quantity')
3) Note that the table total and the 'Amount paid' values do not match
4) Apply the patch and repeat the above steps.. the values should now
match.
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Sally <sally.healey@cheshiresharedservices.gov.uk>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
It doesn't make sense to allow for fields not visible in the
OPAC form to be made mandatory. This patch specifically adds:
* opacnote
* borrowernotes
* sort 1 and sort2 (missing only from Modification)
PatronSelfRegistrationBorrowerMandatoryField
exclusions: sort1|sort2|opacnote|borrowernotes
PatronSelfModificationMandatoryField
exclusions: password|cardnumber|dateexpiry|categorycode|sort1|sort2|opacnote|borrowernotes
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
TEST PLAN:
1. Apply patch, updatedatabase, restart_all
2. In the PatronSelfRegistrationBorrowerMandatoryField add the field password.
3. Go to the self registration page on make sure password is required.
4. Now go to the OPAC modification page, make some changes and attempt to submit. It should work.
5. Go to PatronSelfModificationMandatoryField and select some fields.
6. The columns you selected should now be required.
7. On the PatronSelfModificationMandatoryField page, make sure the select all and clear all buttons work.
Signed-off-by: Kelly McElligott <kelly@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
The code didn't previously correctly do the checks for patron
debarment status and whether the patron has fees, this caused the
intended warnings messages to not appear when they should have.
To test:
1) Create a new club and add a patron to it who has manual debarment
and a manual charge of over $5 (more than the maxoutstanding syspref).
2) Try to create a new club hold for the previously created club and
notice no warnings are listed for the patron.
3) Apply patch
4) Try to create now the club hold again and notice the warnings
being shown in the hold page.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Add a column "Subscriptions" to the batch deletion tools
Add a link on the number of subscription to the search page with all the subscriptions of the record
Add a button in the toolbar to select only biblio record without subscriptions
The changes are only on display
It is still possible to delete records that are attached to subscriptions from this tool (as it is possible for records with attached items)
To test:
1) Go to the batch record deletion (in tools)
2) Select a list of record numbers (select some with one or more subscription)
3) Click on Continue
4) Check that there is no column named "Subscription" and that there is no button "Select without subscription" in the toolbar
5) Apply patch
6) Repeat steps 1 to 3
7a) Check that there is a column named "Subscription" fill with the number of subscriptions attached to the record
7b) Check that the link in the subscriptions column send you to the search page with the subscriptions linked to this record
7c) Check that there is a button "Select without subscription" in the toolbar that selects record with no subscription attached
8) Sign off
Signed-off-by: Frank Hansen <frank.hansen@ub.lu.se>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch modifies the output of reports so that if certain columns are
returned the data in the colums automatically offer menus of actions:
- borrowernumber: View, edit, check out
- cardnumber: Check out
- itemnumber: View, edit
- biblionumber: View, edit
Like the menu of batch operations, this functionality is available only
if the column is returned with its original name (e.g. biblionumber or
[[biblionumber|Biblio number]] but not "biblionumber AS `Biblio
number`).
To test, apply the patch and run a report which will return examples of
each kind of data. I used:
SELECT biblio.biblionumber , biblio.title, items.itemnumber,
items.itemcallnumber, items.barcode, borrowers.firstname,
borrowers.surname, borrowers.borrowernumber, borrowers.cardnumber
FROM issues
LEFT JOIN borrowers ON borrowers.borrowernumber=issues.borrowernumber
LEFT JOIN items ON issues.itemnumber=items.itemnumber
LEFT JOIN biblio ON items.biblionumber=biblio.biblionumber
ORDER BY RAND() LIMIT 50
When the report runs you should see that the data in each affected
column is displayed as a link, each of which should trigger the correct
menu. Test each case to confirm that the correct page is opened.
Test the "toggle data menus" control. Clicking it should hide and show
the menus in the report results. The selection persists until the
user logs out.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch removes the "Additional contents" breadcrumb when working
with news items or HTML customizations. Since news and HTML
customizations are separate links on the Tools home page there's no
reason to have the breadcrumbs imply the two sections are connected in
any way. We already have the "See News" link, for example, for switching
quickly between the two areas.
To test, apply the patch and go to Tools -> News.
- The breadcrumbs should be: Home > Tools > News
- Click "New entry." The breadcrumbs should be: Home > Tools > News >
Add additional content (News). Clicking "News" should take you to
the correct page.
- Go to Tools -> HTML customizations.
- The breadcrumbs should be Home > Tools > HTML customizations.
- Click "New entry." The breadcrumbs should be: Home > Tools > HTML
customizations > Add additional content (HTML customizations).
Clicking "HTML customizations" should take you to the correct page.
Signed-off-by: Barbara Johnson <barbara.johnson@bedfordtx.gov>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
In biblio record editor, when subfield value contains more than 100 characters the editor uses a textarea instead of an input.
On a field using authority plugin, this breaks the JavaScript because it only searches for input tags :
In /koha-tmpl/intranet-tmpl/prog/en/modules/authorities/blinddetail-biblio-search.tt :
> this.getElementsByTagName('input')[1].value = values[i];
Test plan :
1) Prepare :
1.1) Create a new biblio record with a field using authority plugin, for example 606
1.2) Do not use authority plugin but enter in 606$x more than 100 chars
1.3) Save record
1.4) Create a new autority for 606 biblio field with $a and a $x containing more than 100 chars
2) Test 1 :
2.1) Edit again the biblio record, you see a text area for 606$x
2.2) Use authority plugin on field 606
2.3) Search and choose the new autority
2.4) Check $a,$x and $9 are well filled
3) Test 2 :
3.1) Empty field 606
3.2) Create a second $x subfield and fill it with a random value
3.3) Use authority plugin again on field 606
3.4) Search and choose the new autority
3.5) Check $a and $9 are well filled
3.6) Check first $x contains the value from autority and second $x is empty
Signed-off-by: Florian Bontemps <florian.bontemps@biblibre.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
In circ/overdue.tt there is a end tag </td> inside a IF condition.
I should be outside.
Test plan :
Check HTML in overdue page with and without seeing patrons infos from other
branches
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch adjust:
Intranet login
Opac-main
Opac-main - 'log in to your account modal'
To test:
Login at the three places above
Confirm html shows autocomplete off on the fields
Confirm logins work
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch breaks up a translatable string so that "\n" is excluded from
what is translated.
Unrelated: Capitalization is corrected on an instance of the phrase
"Koha to MARC Mappings."
To test, apply the patch and go to Administration -> Koha to MARC
mapping.
- The breadcrumb for the current page should have correct capitalization
("mapping" instead of "Mapping").
- Click the "Add" button for any Koha field. The dialog should display
correctly:
Adding a mapping for: biblio.abstract.
Please enter field tag and subfield code, separated by a comma. (For
control fields: add '@' as subfield code.)
The change will be applied immediately.
Test the way the po file is updated:
> cd misc/translator
> perl translate update en-GB (for example)
- Open the updated po file, en-GB-staff-prog.po
- You should find these lines:
SCRIPT
koha-tmpl/intranet-tmpl/prog/en/modules/admin/koha2marclinks.tt:86
msgid "The change will be applied immediately."
msgstr ""
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
1. Have a bunch of saved reports
2. Try to use the sys pref NumSavedReports to limit how many show by default
3. It doesn't work
4. Apply patch
5. Try again, now it should work
Signed-off-by: Barbara Johnson <barbara.johnson@bedfordtx.gov>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
As per https://bugs.koha-community.org/bugzilla3/show_bug.cgi?id=27846#c0,
breadcrumbs should adhere to the WAI-ARIA Authoring Practices. Most Staff
Client template files have already been fixed, but there were a few that
were missed.
This patch fixes that.
Test plan:
1) Apply this patch.
2) Visit these pages in the Staff Client:
Home > Acquisitions > TestVendor > Basket TestBasket (1) for TestVendor (*)
Home > Administration > Set library checkin and transfer policy (**)
Home > Patrons > Merge patron records (***)
...and confirm that the breadcrumbs display correctly.
(*) Can be accessed by creating a test basket for a test vendor
(**) Can be found under Administration -> Patrons and circulation
(***) Can be found by trying to merge two Patron records
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
The template file for ILL requests has a small typo in the breadcrumbs
section: there exists an extra › HTML entity after "Home".
This patch fixes that.
Test plan:
1) Access the ILL requests module, and notice how an extra character
is displayed after "Home" in the breadcrumbs.
2) Apply this patch.
3) Refresh the page -- the extra character is no longer displayed.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
additional_contents.code is used to group DB rows together. Each row
represent one content in a given language, and the code is used to know
they are translation of the lang='default' one.
It's not really useful for the end user and we could hide it and
generate it.
Test plan:
Create/Edit/Delete additional contents (news and HTML customizations)
and confirm that they are correctly grouped together.
You need several languages installed to test this patch correctly.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Broken by bug 28445.
See also the FIXME from
commit 86156da415
Bug 28445: Adjust code to handle regexs
The problem is that the cataloguing plugins inject JS code in the DOM BEFORE the footer
in somes page we have all the JS loaded at the end of the DOM
and so $ (jQuery) is not defined
It's working on additem as we don't have the JS in the footer, but the
batch item mod tool has it there.
Test plan:
Batch edit items and confirm that cataloguing are working correctly with
this patch applied.
Signed-off-by: Andrew Nugged <nugged@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch makes a few corrections, including adding the
correct Flatpickr date format option when the timepicker is enabled.
Besides past and future date options, I've added a "pastinclusive"
option which allows dates in the past OR today. This option was
previously applied to the checkin page.
The patch also corrects a couple of places where the wrong date field
was modified with the new data attributes.
To test, apply the patch and test the datepickers on the batch checkout
and renew pages. When you select a date and time the "TimeFormat" system
preference should be correctly applied.
The calendar widget on the checkin page should allow you to select
today's date.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
We must reduce the instantiations as much as possible to take advantages
of the default values and specific behaviours we have defined in
calendar.inc
This patch is suggesting to have a .flatpickr class and using the data
attributes:
- flatpickr-futuredate
- flatpickr-pastdate
- flatpickr-enable-time
- flatpickr-on-close-focus
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
search_field.weight is of type NUMERIC(5,2) in the database, and values
are rendered as floats in /admin/searchengine/elasticsearch/mappings.pl
But the field validation only accepts INTs. This patch fixes the pattern
to accept NUMERIC(ish) values
- Enable Elasticsearch (but no need to actually index anyting)
- go to cgi-bin/koha/admin/searchengine/elasticsearch/mappings.pl
- Enter an integer (eg "8") into any "weight" column and click save
- Koha now displays the value as NUMERIC, eg. "8.00"
- Change nothing, and click save again
- Save does not work, you get a warning by the browser that the input
does not match the requested format (because in the html field only
ints are allowed, but the DB stored the value as numeric and returns
it as such)
- Workaround: Change all the values back to ints (i.e. remove ".00"),
but this is very cumbersome if you have several weights
- Apply the patch
- Now try to save again (without changing eg "8.00" to "8". It works
- Add a new weight (eg "4"), save, it's turned into "4.00", but saving
again still works
Sponsored-by: Steiermärkische Landesbibliothek
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This was missed when initially adding the notice.
To test:
- Go to Administraiton > patron categories
- Edit a patron category and check "Hold reminder" in messaging
preferences, save.
- Go to the overview page and verify it shows as 'Unknown'.
- Apply patch.
- Descrpition should now display.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
The new message appears in the list on the edit view, but the list view
is showing "unknown"
Test plan:
Set AutoRenewalNotices to "according to patron messaging prefs"
Edit a patron category
Tick all the checkboxes
On the category list view you should see a correct display in the
"Messaging" column
Signed-off-by: Kelly McElligott <kelly@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
The validation of the forms were blocked with "X item mandatory fields
empty" when at least one dropdown list subfield was marked as mandatory.
We need to add the 'input_marceditor' class to the select (does it
actually make sense? select vs input...)
Caused by
commit 6ed29bccef
Bug 27526: Fix mandatory and important checks
Which lamentably failed as it was stating:
"Using .input_marceditor let us fix the additem.tt form and prevent to break the other ones"
Signed-off-by: Marion Durand <marion.durand@biblibre.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Since one of the patches of BZ 27526 (Bug 27526: Fix mandatory and
important checks), CheckMandatorySubfields use the class
"input_marceditor" but in file serials-edit.tt this class is not set for
all field (it is present on text input but not on select input) 5
9- Check that no error appear and that your item has been created.
In consequence if a select field is set as mandatory, it is detected as
missing even if it is filed and so you can't submit the form and receive
the new serial.
Test plan:
0- Be sure to be in a version of koha where the patch that introduces
the bug is present (it is present in master since Jul 8 2021 (it is
present in 21.06.00.046) and will be pushed in 21.11.00)
1- Create (or find) a subscription for a biblio record and select the
option "Create an item record when receiving this serial"
2- Be sure to have at least one mandatory subfield that is filed with a
select input in the framework used by the biblio record. (ex: 995$b,
995$c or 995$e in unimarc; 952$a, 952$b or 952$c in marc21)
3- From the subscription-detail page click on "Receive"
4- Change the status to "Arrived" and fill the item form that appears.
5- Click on "Save"
6- Check that an error box appear with the message " Form not submitted
because of the following problem(s) 1 mandatory fields empty
(highlighted)" (the number can be different according to the number of
concerned subfields)
7- Apply the patch
8- Repeat step 3 to 5
9- Check that no error appear and that your item has been created
JD amended patch: remove comma to separate classes
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch goes through the codebase and updates existing revelant calls
to .api referencing the Koha REST dataTables wrapper to use the name
name 'kohaTable'.
Test plan.
1) Ensure the tables on the following pages all continue to work as
expected
a) acqui/parcel
b) admin/branches
c) admin/cities
d) admin/smtp_servers
e) pos/register
f) tools/quotes
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
On bug 23376 the developer was too clever by half. Instead of passing
values to the template we moved to simply passing the order object.
The calculations that populated the unitprice, however, were simply dropped.
This patch restores the behaviour of setting unitprice to the estimated cost
by default. We do this conditionally in the template
To test:
1 - Create a basket and adding items to it. Set the 'Vendor price' to
'20', do not add an 'Actual cost'
2 - Close the basket
3 - Select 'Receive shipment'
4 - Set a value for vendor invoice
5 - Receive the order you created
6 - Observe 'Actual cost' is = 0.00
7 - Apply patch
8 - Refresh the order receival page, and confirm the 'Actual cost' =
20.00
9 - Cancel receipt - reopen basket - edit order - add an actual cost - close
10 - Receive the order again
11 - Confirm the actual price is used
12 - Repeat this whole plan, but ensure the vendor has a different value for
Invoice prices: Include tax
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch converts the point of sale receipt printer controller to
using GetPreparedLetter instead of calling getletter directly.
Test plan
1. Setup for testing:
i. Enable EnablePointOfSale and UseCashRegisters system preferences
ii. Add a new cash register
(Administration > Accounting > Cash registers)
iii. Add one or two products for sale
(Administration > Accounting > Debit types, make sure 'Can be sold?' is ticked)
2. Go to Home > Point of sale
3. Add some items for purchase to a sale
4. Click confirm
5. Click on 'Print receipt' and save the PDF file somewhere
6. Apply patches
7. Update database: updatedatabase
8. Repeat steps 2-5
9. Compare receipt PDFs - should be no changes
10. Check that the default RECEIPT is updated - for print, HTML should be ticked
11. Sign off!
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch updates a few more instances of jQueryUI datepickers which
were missed initially, replacing them with Flatpickr widgets.
Also changed: A few datetime input fields are updated to have a size of
20, consistent with other datetime input fields.
To test, apply the patch and go to Circulation.
Check in:
- With the 'SpecifyReturnDate' system preference enabled, go to Check
in.
- Click the "Checkin settings" link.
- Test the "Specify return date" field. Clicking it should trigger a
Flatpickr widget with a time picker. It should limit your selection to
dates in the past.
- Check the "Remember return date" checkbox and confirm that the date is
preserved over page reloads.
- Check and uncheck the "Box drop mode" checkbox to confirm that the
return date field is disabled and enabled correctly.
Check out:
- With the 'AllowRenewalOnHoldOverride' preference enabled, check out to
a patron who has a checkout which is on hold for another patron.
- At the bottom of the table of checkouts, click the "Override renewal
restrictions" checkbox.
- The on-hold checkouts should now have a checkbox in the "Renew"
column. Check one or more of these checkboxes.
- In the table footer you should now see two date inputs, "Renewal due
date" and "On hold due date." These should both trigger Flatpickr
widgets with time pickers.
- Confirm that your date selections are submitted correctly when you
renew items.
ILL checkout:
- Create a new ILL request with the type "book," filling in at least
title, patron, and destination library.
- On the "Manage ILL request" page, click "Confirm request" and "Confirm
request" on the next confirmation page.
- There should now be a "Check out" button in the "Manage ILL request"
toolbar. Click it.
- Test the "Due date" field. It should trigger a Flatpickr widget with a
time picker.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch generates a function to be used in places where select2
dropdowns are usesd for choosing pickup locations. This cleans
repeated/almost identical code introduced by different bugs.
To test:
1. Make sure choosing pickup locations works
2. Apply this patch
3. Repeat 1
=> SUCCESS: No functional changes
4. Sign off :-D
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds infinite scrolling to the pickup locations select2
dropdowns on the staff interface.
It does so by adding a new transport function (in select2.js) to read
the response headers Koha's API sends back, and converting to the right
data structure Select2 expects for the feature to work.
This is manually used in the different pickup locations dropdowns.
There's a separate bug that will introduce a select2 wrapper that will probably embed this function in it.
To test:
1. Run the [DO NOT PUSH] script inside koha-shell to generate random
pickup locations:
$ kshell
k$ perl generate_pickup_locations.pl
2. Try placing holds. Notice the visible pickup locations dropdowns
display some pickup locations based on the matches you got. They are
all fetched once
=> SUCCESS: It works
3. Repeat for the current holds page and the patron holds listing
=> SUCCESS: Same behavior
4. Apply this patch
5. Repeat 2 and 3
=> SUCCESS: Things work, but pickup locations are retrieved as needed,
while you scroll.
6. Sign off :-D
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Bug 15812 included a change which allows a click on the patron
search results table cell to toggle the checkbox it contains. This patch
modifies that click event so that it fires the change() event which is
required for toggling the "Add to patron list" and "Merge patrons"
buttons.
To reproduce this problem, perform a patron search in the staff client
which will return multiple results.
- In the first column containing checkboxes, click in the empty part of
the table cell. The checkbox should be checked.
- However, the "Add to patron list" button remains disabled.
- Clicking a table cell to check another checkbox should result in the
"Merge selected patrons" button being enabled, but it doesn't.
To test, apply the patch and repeat the process above. The behavior of
the buttons should be the same whether you're clicking the checkbox
itself or the table cell it's in.
Signed-off-by: Barbara Johnson <barbara.johnson@bedfordtx.gov>
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch builds on Bug 22318 to move the OpacNavBottom system
preference into the "Additional contents" system, making it possible to
have language- and library-specific content.
To test you should have some content in the OpacNavBottom system
preference. To make testing easier it's also a good idea to have content
in the OpacNav preference.
- Apply the patch and run the database update process.
- In the staff client, go to Tools -> HTML customizations and verify
that the content from OpacNavBottom is now stored there. When you
edit the entry you should see content from the OpacNavBottom system
preference under the "default" tab.
- The publication date for the entry should be today's date.
- Confirm that the previous contents of OpacNavBottom were added
correctly.
- Go to Administration -> System preferences -> OPAC and verify that
the OpacNavBottom preference has been removed.
- Update and reinstall active translations (for instance fr-FR):
- cd misc/translator/
- perl translate update fr-FR
- perl translate install fr-FR
- View the OPAC and confirm that the contents of the OpacNavBottom
system preference displays in the left-hand sidebar.
- Test as many pages as possible to confirm that wherever the
OpacNavBottom content is displayed, OpacNavBottom is also displayed.
- Test also using the updated translation.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch builds on Bug 22318 to move the OpacNav system
preference into the "Additional contents" system, making it possible to
have language- and library-specific content.
To test you should have some content in the OpacNav system
preference. To make testing easier it's also a good idea to have content
in the OpacNavBottom preference.
- Apply the patch and run the database update process.
- In the staff client, go to Tools -> HTML customizations and verify
that the content from OpacNav is now stored there. When you
edit the entry you should see content for each of the enabled
translations in your system under each tab.
- Confirm that the previous contents of OpacNav were added
correctly.
- Go to Administration -> System preferences -> OPAC and verify that
the OpacNav preference has been removed.
- Update and reinstall active translations (for instance fr-FR):
- cd misc/translator/
- perl translate update fr-FR
- perl translate install fr-FR
- View the OPAC and confirm that the contents of the OpacNav system
preference displays in the left-hand sidebar.
- Test as many pages as possible to confirm that wherever the
OpacNavBottom content is displayed, OpacNav is also displayed.
- Test also using the updated translation.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Bug 24223: (follow-up) Add date to OpacNav additional content entries
This follow-up modifies the atomic update so that it inserts today's
date as the "Published on" date. Without that information the system
considers the item unpublished and will not display the content.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Bug 24223: (follow-up) Make logged-in user's branchcode available to template
This patch makes a couple of corrections for problems I discovered
while working on Bug 24224: The variables required for correct display
of news items by branch and language were not consistently available to
the templates.
In opac-readingrecord.pl, the "lang" variable was being overwritten. On
this and other pages the logged-in patron's brachcode was not made
available. I've corrected instances of KohaNews.get() to use the
globally-available "logged_in_user.branchcode" instead.
To test, apply the patch and follow the original test plan, with the
addition of instances of the OpacNav additional contents item which
have a specific library selected.
Confirm that such items are correctly displayed according to the
logged-in user's home library. If there is no logged-in user the
library-specific OpacNav should not display.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Bug 24223: (follow-up) Updates to conform to new practices
- The patch now works with new "Additional contents" system
- The database update follows new skeleton.pl
- Add "OpacNav" option to the additional contents template
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Bug 24223: (follow-up) Add missing "return" to atomicupdate
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Bug 24223: (QA follow-up) Link OpacNav to HTML customizations now
In the pref description of OpacNavBottom. (Before obsoleting that
one too somewhere soon.)
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds Dataly Tech to the list of "Contributing companies
and institutions" in the About page.
Test plan:
1) View the About page, notice how Dataly Tech is missing
2) Apply this patch
3) Reload the About page, this time "Dataly Tech, Greece" is listed
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
TO test:
1 - Have a patron with a unique surname i.e. Acosta
2 - Enter the surename into 'Search patrons' box on staff homepage
3 - You are redirected to 'members/moremember.pl'
4 - Enter the surname into 'Check out' box at top of page
5 - You are redirected to 'members/moremember.pl'
6 - Apply patch
7 - Enter the surename into 'Search patrons' box on staff homepage
8 - You are redirected to 'members/moremember.pl'
9 - Enter the surname into 'Check out' box at top of page
10 - You are redirected to 'circ/circulation.pl'
Signed-off-by: Owen <oleonard@myacpl.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
It is a confusing name because we have 'Article Request' as a feature,
and this does not follow Koha terminology.
Test plan:
`updatedatabase` and confirm that the syspref has been renamed
`git grep RequestOnOpac` => No occurrence in the code
QA: The syspref's value is always retrieved using Koha.Preference from
.tt files, we don't need to send it from controllers or C4::Auth
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch changes the "New entry" button on the additional contents
page to be a split button which offers the alternative of the
non-default editor (as defined by AdditionalContentsEditor).
Also changed: I moved some of the template logic around to consolidate
handling of the editor variables.
To test, apply the patch and go to Tools -> HTML customizations.
- At the top of the page there should be a split button. The dropdown
option should offer the non-default editor.
- If AdditionalContentsEditor is set to "text editor," clicking the
"main" part of the button should take you to an entry page which uses
the text editor.
- The dropdown part of the button should say "New entry using
WYSIWYG editor."
- Switch the AdditionalContentsEditor preference and confirm that the
button reflects the change.
- Confirm that the individual "Edit" buttons for each existing content
entry still works correctly according to the system preference.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch modifies the SQL report creation process so that the list of
runtime parameters includes an option for bibliographic framework.
To test, apply the patch and go to Reports -> Create from SQL.
- Click the "Insert runtime parameter" menu button and select
"Bibliographic framework."
- You should be shown a modal dialog in which you can change the label
on the framework input.
- Click "Insert parameter." The SQL field should now contain the correct
parameter, e.g. <<Framework|biblio_framework>>
- Use the parameter to define an SQL query, e.g.
"SELECT * FROM biblio WHERE frameworkcode =
<<Framework|biblio_framework>> LIMIT 10"
- Run the report. You should be asked to choose a framework. Confirm
that the report runs correctly.
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch replaces the use of jQueryUI's datepicker in the onboarding
templates. The addition of calendar.inc to the template requires that
some additions be made to the installer's header files, adding the i18n
JavaScript assets.
jQueryUI-specific CSS is removed from installer.scss, and inclusion of
Flatpickr's SCSS is added.
To test, apply the patch and rebuild the staff client SCSS
(https://wiki.koha-community.org/wiki/Working_with_SCSS_in_the_OPAC_and_staff_client).
- Start the installation process.
- Continue through the installation process until you reach the stage in
onboarding where you are creating a patron category.
- The "Enrollment period -> Until" field should be a Flatpickr calendar
widget. The widget should look and work correctly.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch updates the appearance of the "confirm holds" page, shown
during the process of placing a hold for someone in the staff interface.
Most of the changes affect the appearance of the page when placing
multiple holds on titles which have one or more holds on them already.
The changes are intended to make the page clearer and easier to scan,
especially when placing multiple holds at once.
Also changed: The page heading when placing multiple holds now changes
based on whether you've selected a patron or not. It says "Search
patrons or clubs" when it's waiting for a patron/club selection. It says
"Place holds" after the patron/club has been selected. This is instead
of "Confirm holds" on both pages.
To test, apply the patch and rebuild the staff interface CSS
(https://wiki.koha-community.org/wiki/Working_with_SCSS_in_the_OPAC_and_staff_client).
- Go to Administration -> System preferences and set HoldsSplitQueue to
"nothing."
- Perform a search in the staff client catalog and place multiple holds
titles from that result set on hold for a patron.
- Perform the same search and select one or more of the titles you
selected before in addition to one or more titles with no holds.
- After clicking the "Place hold" button you should see a page with the
heading "Search patrons or clubs" showing information about existing
holds. This section of the page should be clear and readable, with
clear distinction between each section of information about each hold.
- Test this page again under each different option for the
"HoldsSplitQueue" system preference by changing the preference and
reloading the page.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch modifies the basic cataloging interface so that form
validation errors are collected in a static "dialog" at the top of the
page instead of showing in a transient JavaScript alert.
The text of the message is roughly the same as it was in the alert, and
links have been added so that the user can click to jump directly to the
field referenced.
If the user scrolls down away from the static error message, a button
appears in the floating toolbar to jump back to the message.
To test, apply the patch and rebuild the staff interface CSS
(https://wiki.koha-community.org/wiki/Working_with_SCSS_in_the_OPAC_and_staff_client).
- Go to Cataloging and create a new record using the basic cataloging
editor and a framework which has multiple mandatory fields defined
(e.g. an unmodified default framework)
- Without entering anything in mandatory fields, click the "Save"
button.
- You should see a message box appear at the top of the page.
- It should list each missing mandatory subfield and tag, each with a
"Go to field" link next to it.
- Clicking the "Go to field" link should switch you to the correct tab
and scroll the mandatory field into view.
- When you have scrolled down far enough for the error messages to be
offscreen, an "Errors" button should appear in the floating toolbar.
Clicking it should scroll the box back into view.
- The JS function for scrolling to a particular element on the screen
has been modified, so test that the links in the toolbar for
individual tags still work correctly.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds table settings for the three tables which appear on the
patron's "Print summary" view. This will allow the administrator to
set a default configuration for columns on the print summary page.
To test, apply the patch and restart-all to load the revised columns
settings YAML. Rebuild the staff interface SCSS
(https://wiki.koha-community.org/wiki/Working_with_SCSS_in_the_OPAC_and_staff_client).
- Go to Administration -> Table settings -> Circulation.
- Under the "Circulation tables" heading you should see a "Jump to" link
to "print_summary."
- In the settings for the print_summary page you should see three
tables: print-summary-checkouts, print-summary-fines, and
print-summary-holds.
- Locate a patron account which has checkouts, fines, and holds.
- From the patron detail view click "Print -> Print summary."
- A new window should open with the print summary view. All tables
should display correctly.
- Test that the "Columns" buttons work correctly to show and hide
columns.
- Make changes to the default settings for these tables to confirm that
they work on the print summary page.
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds text to each step of the installation process showing
which steps have been completed, which step is current, and which steps
come next. This helps the user know where they are in the process.
To test, apply the patch and begin the process of installing Koha. In my
testing environment I drop the Koha database and create it again.
On each step of the installation process, confirm that the list of steps
is correct, showing the right stage in the process.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
We did some clean-up in that area a little while ago, agreeing that
as we acutally display the descriptions, the label should be just
"collection".
This patch also removes some ():
Before:
4 items found for Centerville and item type:(Books) and collection: (Reference) and shelving location: (General Stacks)
Now:
4 items found for Centerville and item type: Books and collection: Reference and shelving location: General Stacks
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds the new filter form in the sidebar when showing results.
To do so the form markup is moved into a BLOCK so that it can be reused.
This patch also adds pre-selection of submitted options on the filter
form so that it reflects the user's choices.
To test, apply the patch and rebuild the staff client CSS
(https://wiki.koha-community.org/wiki/Working_with_SCSS_in_the_OPAC_and_staff_client).
- Go to Circulation -> Holds queue.
- Submit the form with one or more filters selected.
- On the results page the queue should be correctly filtered and the
sidebar should show your search fields preselected.
- Test with the CircSidebar preference enabled and disabled. The
circulation menu should appear correctly, with the filter form only
displaying in the sidebar after submitting the form.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch makes the code for itemtypeslimit work, and adds options for shelving location and collection code
This also remove the 'post' method from the form to allow easy bookmarking
To test:
1 - Add holds to your system
2 - Run the holds queue builder
3 - Browse to Circulation->Holds queue
4 - Note the library dropdown
5 - Apply patch
6 - Reload and note new options
7 - Test that both limits and 'All' options work as expected
8 - Note that description at top includes options when selected
"### items found for All libraries and item type:(Books)"
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds the ability to set a library as 'public' or not; this
allows librarians to hide back office library branches from the opac.
Test plan
1/ Set a library as public from `admin > libraries`.
2/ Navigate to the `Libraries` page in the OPAC
3/ Note that only `public` libraries are displayed.
Signed-off-by: Barbara Johnson <barbara.johnson@bedfordtx.gov>
Signed-off-by: Christopher Brannon <cbrannon@cdalibrary.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch replaces the "Holding library" column in the returns table
with a 'Transfer to' column that displays the destination for the item
awaiting transfer if a transfer exists.
Signed-off-by: Ben Daeuber <bdaeuber@fargolibrary.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
The patron category type code (A, C, O, ...) is currently displayed in the
patron module search and the patron card creator and acquisition patron searches.
This information is not useful for most users, as these are internal codes
that cannot be easily "decoded". And while you might be able to guess A as
Adult in English, it doesn't translate to other languages.
This patch wraps a span around the patron category type code shown
in () after the patron category.
To test:
- Verify for each of the following three searches, that the patron category code
displays in the search results, but is wrapped in a span with the class
patron_category_type
- Tools > Patron card creator
- New > New card batch > Add patrons
- Search for patrons
- Patrons
- Search for patrons
- Acquisitions
- Add a budget
- Add a fund for the budget
- Search for a user or owner to add
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This is getting messy. No idea how I tested the previous patches but it
was not working, the problem still persisted.
This patch is using the I18N TT plugin to make things easier and fix the
original problem.
Test plan:
Apply the patch
perl translate update fi-FI
Edit misc/translator/po/fi-FI-messages.po
Locate and translate "Check out"
61 #: koha-tmpl/intranet-tmpl/prog/en/modules/members/tables/members_results.tt:20
62 msgid "Check out"
63 msgstr "Laina"
Locate and transate "View"
182 #: koha-tmpl/intranet-tmpl/prog/en/modules/members/tables/members_results.tt:22
183 msgid "View"
184 msgstr "Nayta"
Apply the change to the fi-FI templates
perl translate install fi-FI
Now enable the fi-FI in the lang syspref, search for patron and confirm
that the result view is displayed correctly.
Note that the "Check out" and "View" strings are correctly translated
(when you hover the cardnumbers or patron's names)
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
When placing a hold, the dropdowns for selecting a pickup library automatically right-truncate, so one can type "cen" and find Centerville.
On the Libraries page in Admin, however, the search box both left- and
right-truncates, so one can type "en" and find Centerville.
This patch makes the search perform 'contains' searches.
To test:
1. Try placing a hold. Make sure your rules allow Centerville to be a
valid pickup location.
2. Search 'cen'
=> SUCCESS: Centerville shows
3. Search 'en
=> FAIL: Centerville doesn't show
4. Apply this patch and reload
5. Repeat 2
=> SUCCESS: Works!
6. Repeat 3
=> SUCCSS: Centerville shows!
7. Sign off :-D
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch makes the select2 dropdowns for pickup locations not be
limited to the RESTdefaultPageSize syspref limit.
To test:
1. Have less than 20 libraries in your system as valid pickup locations
2. Place a hold via the staff client
=> SUCCESS: See that all your libraries appear in the pickup location dropdowns at the bib and item level
3. Update RESTdefaultPageSize, set the value to something lower than your count of pickup libraries
4. place another hold
=> FAIL: Your pickup location list gets cut off and only shows as many locations as RESTdefaultPageSize allows
5. Apply this patch
6. Repeat 4
=> SUCCESS: All your pickup locations show
7. Sign off :-D
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds an option to insert "Source of classification or
shelving scheme" as a runtime parameter in SQL reports. The ability to
use cn_source as a parameter seems to have always been part of this
feature but wasn't documented.
To test, apply the patch and go to Reports -> Create from SQL.
- Click the "Insert runtime parameter" button and select
"Classification source."
- Customize the parameter label if you wish and click "Insert
parameter."
- The parameter should be inserted like this:
<<Source of classification or shelving scheme|cn_source>>
- Use it to create a valid SQL report, for example:
SELECT * FROM items WHERE cn_source = <<Source of classification or
shelving scheme|cn_source>> LIMIT 10
- Confirm that upon running the report you are prompted to select a
classification source.
- Confirm that the report runs correctly.
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch alters the form shown when using the "Insert runtime
parameter" button in SQL reports. It makes the label field required and
removes "optional" from the field hint.
To test, apply the patch and go to Reports -> Create from SQL.
- Click the "Insert runtime parameter" button and select "Authorized
value."
- Clear the "parameter label" field and click "Insert parameter."
- The form should display an error asking you to fill in the label
field.
- Test that the category field is also required.
- Close the modal and select a different runtime parameter.
- Test again that the label field is required.
- Test that the form submits correctly when the label field is
populated.
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds an option to insert "list" as a runtime parameter in SQL
reports (As added by Bug 27380).
To test, apply the patch and go to Reports -> Create from SQL.
- Click the "Insert runtime parameter" button and select
"List."
- Customize the parameter label if you wish and click "Insert
parameter."
- The parameter should be inserted like this:
<<List of values|list>>
- Use it to create a valid SQL report, for example:
SELECT * FROM borrowers WHERE categorycode IN <<List of values|list>>
LIMIT 10
- Confirm that upon running the report you are shown a textarea. Enter
two or more values in the textarea, each on a separate line.
- Confirm that the report runs correctly. The SQL above would show you
this when you click "Show SQL code":
SELECT * FROM borrowers WHERE categorycode IN ('A','S') LIMIT 10
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
In Administration › Libraries, we see content of OPAC info as escaped HTML.
This content may be long and seeing HTML tags is strange.
We should not show it in this table.
Or maybe create a modal preview of it (not escaped HTML).
To test :
1) Home > Administration > Libraries
2) In 'Address' column notice the 'OPAC info' field (if this one is
filled) with visible HTML tags
3) Apply patch
4) Repeat 1) and 'OPAC info' field should be gone
Signed-off-by: Owen <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
To test:
1 - go to itemtype config in Admin
2 - confirm it doesn't mention the automatic_return cron
3 - apply patch and restart
4 - confirm note now says "This feature requires the misc/cronjobs/automatic_checkin.pl cronjob. Ask your system administrator to schedule it."
Signed-off-by: Barbara Johnson <barbara.johnson@bedfordtx.gov>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
It looks like this problem was caused by code from bug 25033, we were attempting to have the
dropdown either be the current branch filter, or the suggestion's branch code, but the variables here are confusing and it didn't work
This explicitly sets the branchcode when creating a new suggestion to allow fixing current behaviour and
show the correct value when creating new
To test:
1 - Be signed in as branch A
2 - Browse to suggestions and limit to branch "Any"
3 - Click 'New suggestion"
4 - Defaults to Any
5 - Cancel and limit to branch B
6 - New suggestion defaults to branch B
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
When editing a suggestion, the library will be reset to the currently
logged in librarian's homebranch, no matter what the libray was before.
This fixes this, the library selection will remain at the db value when
edited.
To test:
- Create a suggestion with Any library.
- Edit the suggestion - it will show your homebranch as library
- Change to any library but your homebranch
- The summary should show the correct value after saving
- Edit the suggestoin again - it's set back to your homebranch again
- Apply patch
- Repeat the steps, the pull down should now show the correct library
at all times.
Caveat: I think there is a somewhat separate issue/bug in that once a library
was saved, you cannot switch back to "Any". I haven't been able to fix this and
suggest to maybe file a separate bug.
Signed-off-by: Séverine QUEUNE <severine.queune@bulac.fr>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
When trying to replace an authority record with Z39.50/SRU then a new authority
record is created without deleting the old one and not link the new one with
any record.
This patch fixes that.
Test plan:
1) Try to catalogue a new authority record from cataloguing form.
2) Try to replace that authority record with Z39.50/SRU, then a new authority
record is created and also you have that one that you tried to replace.
3) Apply the patch.
4) Try to replace the authority from step1 with Z39.50/SRU, then is working as
expected.
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Eric Phetteplace <phette23@gmail.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patchset moves the 'category' attribute for virtual shelves, that
takes values of 1 and 2 (private and public respectively) into a boolean
for public.
The DBRev is trivial, and the changes to the code are as well.
To test:
1. have some known public and private lists
2. Apply this patches
3. Run:
$ updatedatabase
=> SUCCESS: Public lists have public=1, private have public=0
4. Run:
$ kshell
k$ prove t/db_dependent/Utils/Datatables_Virtualshelves.t \
t/db_dependent/Virtualshelves.t
=> SUCCESS: Tests pass!
5. Try the feature in staff and OPAC
=> SUCCESS: All good
6. Sign off :-D
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
We must have the column in the table and let DT deal with the
visibility.
This patch hides the "Checked out by" column by default if
RecordStaffUserOnCheckout is off, but the DT column settings is aware of
its existence and the end user can still display the column.
IMO that's the most optimal situation considering both maintenance and ergonomic.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch corrects the date field configurations for the suggestions
sidebar filter. These fields are now linked Flatpickr widgets instead of
jQueryUI datepickers.
To test, apply the patch and go to Suggestions.
- In the sidebar, click "Suggestion information" to expand the form.
- Test these linked date fields:
- "Suggested date from" and "to"
- "Managed date from" and "to"
- "Accepted by from" and "to"
- Each should trigger Flatpickr calendars which are linked, i.e. you
can't select a "to" date which is before a "from" date.
- Test that the dates submit correctly to filter as expected.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch changes the way certain serials search fields are hidden when
a standalone search of Mana is being performed (from the "Search on
Mana" link). Instead of targeting specific labels and inputs to hide we
can hide list items by class.
Unrelated: This patch updates the page heading so that it is different
depending on whether you're searching Koha subscriptions or Mana
subscriptions.
To test, apply the patch and enable Mana.
- Go to Serials -> Advanced search (in the search header).
- The search form should include all fields, including call number,
vendor, library, location, and "Expires before."
- Click "Search on Mana" in the sidebar.
- This page should have the heading "Mana subscriptions search," and
there should only be three fields visible: ISSN, Title, and Publisher.
- When you perform a Mana search which returns results the page should
have the heading "Mana subscriptions (X found).
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds comments to the template to highlight the markup
structure.
This patch should have no effect on the page's appearance or
functionality.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch updates the serials search template to give it consistent
indentation.
The patch also moves one section of markup: The <tfoot> section is moved
to after <tbody> in order to conform to current standards.
To test, apply the patch and go to Serials -> Search subscriptions (in
the header).
- Serials search should work correctly and the page should look correct.
- With Mana enabled, click on the "Search on Mana" link in the sidebar.
- Searches of Mana should work correctly too.
- If you view the diff while ignoring whitespace the only changes should
be the move of <tfoot> and places where line breaks were introduced.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
.hidden get the CSS that interferes with DT behaviour
.hidden {
display: none !important;
}
Test this patch with bug 28859.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch fixes a typo in the Cataloging system preferences text.
"Librarien" -> "Librarian"
To test, apply the patch and go to Administration -> System preferences
-> Cataloging.
- Check the CreateAVFromCataloguing system preference.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
It appears this patchset doesn't fully support bulkmarcimport (see bug
25539 for details).
At this time, to get this bug moving I think we should comment out the
ability to define rules that affect bulkmarcimport and then we can fix
and re-enable that feature at a later date.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch renames 'MARC overlay rules' to 'Record overlay rules' and
moves it up the list to just below 'Record matching rules' to make it
more contextually ordered.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch fixes all the translation issues I could spot in the
marc-overlay-rules template.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch acknowledges the fact that 'merging' has a different meaning
in Koha than the behavior this great patchset introduces. The more
idiomatic way of describing the behavior is to talk about 'overlay rules'.
This patch also:
- Fixes kohastructure.sql missing table encoding a collation
- Fixes the atomic update completely missing a table
- Moves the syspref entry to 'Importing', probably a rebase issue
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Bug 14957: (QA follow-up) Fix syntax error in atomicupdate
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Bug 14957: Fix imports in tests
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Bug 14957: Fix imports in marc-overlay-rules.pl
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Bug 14957: Fix syspref's values
It didn't switch off when set to "don't use"
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
JD amended patch: Fix license statement
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds an info-tooltip to the field rules in the table header
to expand on their meaning to reduce the need to read the documentation
each time you come to use the configuration tool
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch updates the action buttons to include btn-default and
switched from btn-sm to btn-xs to match other similar UI's found in
datatable based admin pages.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Add a rule based system for merging MARC records to for example
prevent field data from being overwritten.
To test:
1. Apply this patch.
2. Log in to staff client.
3. Enable new syspref MARCMergeRules.
4. Click the new link "MARC merge rules" in the "Catalog"
section of the Koha administration page.
5. Create a new rule:
Module: source, Filter: *, Tag: 245, Preset: Protect.
6. Clicking "Edit" should allow you to edit corresponding rule.
7. Clicking "Delete" should remove corresponding rule after confirmation.
8. Selecting one or more rules followed by clicking "Delete
selected" should remove all selected rules after confirmation.
9. Try creating a rule with tag set to "**", the other options does
not matter. Verify that saving this rule produces an error
message complaining about invalid tag regular expression.
10. Try creating a rule with tag set to "008" (or other control
field) and set Appended: Append and Removed: Skip, the other
options does not matter. Verify that saving this rule produces
an error message complaining about invalid combination of actions
for control field.
11. With the 245 rule in step 5 in place, edit a bibliographic record,
change 245a for example (which should be Title for MARC21) and save.
12. Verify that the changes has not been saved.
13. Create a new rule:
Module: source, Filter: intranet, Tag: 245, Preset: Overwrite.
14. Repeat step 12, and verify that the changes has now been saved.
15. Run tests in t/db_dependent/Biblio/MarcMergeRules.t and very
that all tests pass.
Sponsored-by: Halland County Library
Sponsored-by: Catalyst IT
Sponsored-by: Gothenburg University Library
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Christian Stelzenmüller <christian.stelzenmueller@bsz-bw.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
More robust as it takes empty array into account
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch restores the link to 'more results' should you exceed the
hard coded limit of 300 component parts.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch updates the default details tab selection to components for
the case when there are no holdings attached to the record and there is
no HTML5 content to display in preference.
Bug 11175: (QA follow-up) OPAC - Display components tab if no holdings
As for the staff client, this selects the default tab to be 'Components'
for the case where no holdings are found.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch updates the display so that rather than displaying the
components using the main XSLT and then using CSS to move them into a
box on the right side for display, which causes issues with RTL records;
We instead add them in a new tab beneath the rest of the record details
alongside holdings and other details.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Andrew Nugged <nugged@gmail.com>
Bug 11175: (QA follow-up) Fixes for bug 12561
Bug 12561 changed the prototype for XSLTParse4Display so this patcha
accounts for the additional calls to that method introduced in this
patchset.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Andrew Nugged <nugged@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
The 'ShowComponentRecords' preference was displaying under the 'Export'
section in the cataloging system preferences tab. As a display related
feature, I felt it was more appropriate to put it into the 'Display'
section.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Andrew Nugged <nugged@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Support for Elasticsearch was added in commit "Bug 11175: Add
Elasticsearch support".
Signed-off-by: Joonas Kylmälä <joonas.kylmala@helsinki.fi>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Andrew Nugged <nugged@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
The syspref is not only affecting staff interface so moving it to
Cataloguing section. Added also notes about UNIMARC and Elasticsearch
not being supported.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Pasi Kallinen <pasi.kallinen@koha-suomi.fi>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Andrew Nugged <nugged@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Shows the component records of a host, on the hosts detail view in
staff client or OPAC, with clickable links to the component records.
The host does not require linking entries to the components, but
components do require a link to the host record via 773$w.
Adds a new search index, Control-number-identifier (aka cni), which
indexes the 003 controlfield.
Adds 'Yet Another System Preference', ShowComponentRecords, which can
be used to turn this feature on or off in staff client and/or OPAC,
and defaults to off.
When looking up the component part records, the code searches for
records with (773$w=Host001 and 003=Host003) or 773$w='Host003 Host001'
or, if the 003 is not defined in the Host, 773$w=Host001.
Does not use easyanalytics or useControlNumber.
Only for MARC21 biblios - UNIMARC has not been updated.
staff-global.css and opac.css have not been recreated, so you need
to use sass to recreate those from staff-global.scss and opac.scss
Test plan:
0) Apply patch
1) perl bulkmarcimport -file /tmp/easypiano.mrc -m MARCXML
(This file is an attachment on the bug)
2) rebuild the zebra biblio index
3) Search for "easy piano" in staff client, and go to
the biblio detail page. You should not see anything different
in the record detail page.
4) Do the same on OPAC.
5) Change the ShowComponentRecords syspref appropriately and check
the record detail page in staff client and OPAC.
You should see a list of component part records.
Rebased-by: Joonas Kylmälä <joonas.kylmala@helsinki.fi>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Pasi Kallinen <pasi.kallinen@koha-suomi.fi>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Andrew Nugged <nugged@gmail.com>
JD amended path
- if ($xslsyspref =~ m/Details/) {
+ if ( $xslsyspref eq "OPACXSLTDetailsDisplay" || $xslsyspref eq "XSLTDetailsDisplay" ) {
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
The template conditional for showing the limit menu should be changed
to:
[% IF ( unlimited_total > 10 && limit <= 1000 ) %]
- "unlimited_total > 10" so that the "rows per page" button only shows
if there are more than 10 total results, because 10 is the smallest
increment the "rows per page" control offers.
- "limit <= 1000" so that the "rows per page" button will show when the
current result limit is less than or equal to 1000, because 1000 is
the upper limit to the "rows per page" control.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch creates a new Bootstrap button menu for selecting the number
of search results to be shown. This replaces the HTML <select>.
To test, apply the patch and go to Reports -> Saved reports.
- Test the appearance and functionality of the "Rows per page" button in
various situations:
- A report that returns more than 10 results
- A report that returns fewer than 10 results
- A report that returns no results
- Test that the batch operations button menu appears correctly when
there are biblionumbers, itemnumbers, or cardnumbers in the results.
- When there are no results, or fewer than 10 results with no batch
operations possible the toolbar shouldn't appear at all.
Signed-off-by: George Williams <george@nekls.org>
Signed-off-by: George Williams <george@nekls.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Fixes another occurence of the fines to charges.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
On moremember.pl we load the messaging preferences for display only, we do
not need to load the JS for editing the preferences
To test:
0 - Enable EnhancedMessagingPreferences
1 - Load the detais tab for a member
2 - Note the digest column in messaging preferences is clickable
3 - Apply patch
4 - Reload, it is not clickable
5 - Confirm editing the patron (or their messaging prefs) works as expected
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds an eval around the call to search for analytic records
It pases a value to the template on the staff side, but logs the warning on
the opac
This seems similar to 'decoding_error' which is noted on staff side, but absent on OPAC
The eval follows the patter used during searching
To test:
1 - Add a title to catalog, with 245a:
Digger does it all (not really!)
2 - Set searchEngine preference to: Elasticsearch
3 - The record does not load
4 - Apply patch
5 - The record loads, there is a note about analytics at the top fo the record
6 - View record in opac, no note
7 - Check logs on intranet and opac, searching error is logged
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch modifies the patron entry form to correct a problem with the
write_age() function introduced by the switch to Flatpickr on this page
(Bug 28937).
Rather than selecting the element based on the sequence of elements on
the page, we should add an ID for direct selection.
To test, apply the patch and go to Patrons.
- Locate a patron record which has a date of birth saved.
- When you open that patron for editing, you should see their age
displayed below the date of birth input field, e.g. "Age: 23 years 9
months."
- Changing the date in the date of birth field should update the age
string correctly.
- Go to Patrons -> New patron.
- The date of birth field should have a hint showing the required date
format, e.g. "(DD.MM.YYYY)".
- When you select a date of birth using the Flatpickr calendar the age
string should be updated correctly.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
The JS code is only used when placing a hold for club BUT the date
inputs are not displayed there.
Test plan:
Place holds for patrons and clubs and confirm that the two date inputs
are working correctly
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
- The marcflavour select needs an id to be selected easily
- "Continue to the next step" should be a button (like others)
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch corrects a stray instance of the "datepicker" class in the
inventory template and replaces it with "flatpickr" to trigger a
Flatpickr.
To test, apply the patch and go to Tools -> Inventory. Check that the
"Last inventory date" field is a Flatpickr widget.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch makes minor HTML corrections to several templates, primarily
to wrap form help text in <span class="hint"> or <div class="hint">.
To test, apply the patch and rebuild the staff interface CSS
(https://wiki.koha-community.org/wiki/Working_with_SCSS_in_the_OPAC_and_staff_client).
View the following pages to confirm that forms look correct:
- Administration -> Authority types -> Authority type -> Edit.
- Administration -> Authority types -> Authority type -> MARC structure.
-> Subfields -> Edit.
- Administration -> Authorised values -> View category -> New authorized
value.
- Administration -> Credit types -> New credit type.
- Administration -> Debit types -> New debit type.
- Administration -> Item types -> New item type.
Also changed: Added link to ITEMTYPECAT authorized value page for
users with the correct permission.
- Administration -> MARC frameworks -> MARC structure -> Edit subfields.
- Administration -> Patron attribute types -> New patron attribute type.
- Administration -> Share content with Mana KB.
- Administration -> Z39.50/SRU servers -> New Z39.50 server.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch reworks the controls for adding patrons to a list from the
patron search results page. The <select> is converted to a Bootstrap
dropdown menu, and the list creation form is moved into a Bootstrap
modal.
To test, apply the patch and rebuild the staff interface CSS
(https://wiki.koha-community.org/wiki/Working_with_SCSS_in_the_OPAC_and_staff_client).
- In the staff interface, perform a patron search that will return
multiple results.
- In the toolbar at the top of the search results you should see two
disabled Bootstrap-styled buttons: "Add to patron list" and "Merge
selected patrons."
- The "Select all" and "Clear all" links should work to enable and
disable the toolbar buttons.
- "Clear all" and then check the checkbox next to one of the results.
The "Add to patron list" button should be enabled.
- Check a second checkbox. The "Merge selected patrons" button should be
enabled.
- Test the "Add to patron list" button. It should trigger a dropdown
menu listing existing patrons lists and a "New list" link.
- Test adding to an exising patron list. It should trigger a message
at the top of the page which shows a link to that list.
- Test adding to a new list. It should trigger a Bootstrap modal where
you can enter the name of the new list.
- Submitting the list title form should close the modal and trigger
the display of the message showing how many patrons were added to
your new list. The link to the new list should be correct.
- Test the "Merge selected patrons" button. It should send the selected
patrons to the patron merge screen.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch modifies templates so that instances of "cardnumber" are
replaced with "card number."
Some instances where the word "card" is used by itself have been updated
to "library card" to add some context.
To test, apply the patch and view the following pages:
- Circulation -> Built-in offline circulation interface -> Submit the
"Check out" form without entering number. Check the alert message
which appears.
- Go to Administration -> System preferences and enable the
AutoMemberNum system preference and use the BorrowerMandatoryField
preference to make card number mandatory.
- Go to Patrons -> New patron. The hint under the "Card number" field
should refer to "card number" instead of "cardnumber."
- Go to Tools -> Import patrons.
- Under the page heading, the note should read "If a card number
exists..."
- Under "Field to use for record matching" you should see a "Card
number" option in the menu.
- If you try to import a CSV with an invalid card number you'll see an
error message, "Card number X is not a valid card number."
- Under Tools -> Upload patron images, check the "image file" radio
button. The card number field label should read "Enter patron card
number."
- Log in to the OPAC as a patron whose card has been marked lost. Try to
place a hold. You should see a message containing "please take your
library card to the circulation desk"
- On the "your summary" page you should see a message, "Your library
card has been marked as lost or stolen."
- Try to check out an item to this patron in the self-checkout system.
You should be shown a message, "This library card has been declared
lost."
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
The print notices template had it's own implimentation of a message
dialog. To make it consistent with other area's, we should add the
dialog class.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
AddPatronsToList already took a borrowernumber parameter, however, it
did not check if those were valid numbers. This patch expands the search
to apply to cardnumber or borrowernumbers in the subroutine.
Template and script are adjusted to allow choosing borrowernumbers or cardnumbers
To test:
1 - Apply patch
2 - Browse to Tools->Patron lists
3 - Create a list, or choose Actions->Add patrons for an existing list
4 - Click 'Add multiple patrons'
5 - Cardnumbers is preselected
6 - Enter a list of cardnumbers, ensure you test:
Cardnumber already in list
Cardnumber not in list
Non-existent cardnumber
7 - Patrons should be added/errors reported correctly
8 - Repeat with borowernumbers
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds aqorders.order_internalnote and
aqorders.order_vendornote to the Acquisitions history search.
To test:
1) Apply patch and restart services
2) Create an order in Acquisitions and set an internal note and a vendor note
3) Go to /cgi-bin/acqui/histsearch.pl and search by internal or vendor
note using the terms you set in step 2
4) Note your order is returned and internal note and vendor note are
included in the search results at the end of the table
Sponsored-by: Bibliotheksservice-Zentrum Baden-Wuerttemberg
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
At the OPAC we already had a verify_images JS function in amazonimages.js
It's preferable to use another function name.
This patch replace our verify_images with verify_cover_images and apply
the change to the staff code as well.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch removes integration of the Adlibris cover service which has
been discontinued.
To test, apply the patch and rebuild the OPAC and staff interface CSS:
(https://wiki.koha-community.org/wiki/Working_with_SCSS_in_the_OPAC_and_staff_client).
- Run the database update.
- Go to Administration -> System preferences -> Enhanced content. You
should see no Adlibris-related preferences.
- Perform a catalog search and confirm that the search result and detail
pages look correct.
- Enable one or more other cover image services and test that search
results and detail page look correct.
- Perform the same test in the OPAC including these pages:
- Catalog search results
- Bibliographic detail page
- Lists
- Comments
- User summary
- User reading history
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch modifies the "Add to basket" modal in acquisitions so that
focus is automatically moved to the first form field when the modal
appears.
The patch also corrects the modal markup so that it's more consistent
with default Bootstrap markup.
To test, apply the patch and go to Acquisitions.
- Search for a vendor and, if necessary, create a basket.
- Click the "Add to basket" button. The modal which appears should
have a header reading "Add order to basket <basketname>"
- The form field should have cursor focus.
- View the basket and click the "Add to basket" button in the toolbar.
- The modal shown should also be correct.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
When we auto select the last used tab, we hit code that hides the Subgroup
dropdown
Clicking to other tabs shows the dropdown again
There is code on the tab selection to hide subgroups on the 'All' tab,
the other line seems superfluous
To test:
1 - Create a report and assign a group and subgroup, creating if necessary
2 - Browse to "Reports->Use saved"
3 - Click on the tab for the report you just created, see the subgroups dropdown
4 - Reload the page, Subgroups dropdown disappears
5 - Apply patch
6 - Relaod the page
7 - It's back!
8 - Confirm dropdown filters as expected
Signed-off-by: Donna <donna@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
TO test:
1 - Place a variety of holds on some records
2 - Place more holds on records with low biblionumbers and less on ones with high biblionumbers
3 - Go to Circulation->Holds ratios
4 - Set the ration to 1 and load the report
5 - Sort by the 'Holds ratio' column and note it is incorrect
6 - Apply patch
7 - Confirm sort works correctly on first three columns and call numbers column
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch changes accounts.inc to use the credit/debit type codes directly
rather than needlessly fetching the credit_type/debit_type object jsut to get
the code. This allows the BLOCK to work on non-object lines
We also only pass a debit or credit type to csv (accountline cannot be both)
empty-line.inc is also removed in favor of correcting the markup
one more column added to total line
To test:
1 - Add some debits and credits to accounts
2 - Browse to Reports->Cash register
3 - Select transaction type 'All transactions'
4 - Output to screen
5 - Run report
6 - Note transaction types column is empty
7 - Output to a file
8 - Run report
9 - Open file and note:
amount column is out of place
extra line before total
10 - Apply patch
11 - Repeat and note display and export are correct
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
The guarantor template must be kept hidden, always.
Test plan:
Edit a patron with a guarantor, click the legend of the "patron
guarantor" block and confirm that the template is not shown
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Strings must be surrounded by double quote or it wil break the translate
script.
Without this patch you get:
5 "dt_name":
6 "<a %]\"="%]\""
in the translated template and the UI explodes with "Template process
failed: file error - parse error"
Test plan:
Apply this patch, update PO files for a given language, translate
"View". Search for something like:
msgid "\\\"View\\\""
msgstr "\\\"Näytä\\\""
Remove fuzzy.
Install the language and search for patrons
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch moves to using a data-start_for attribute to point the 'from'
flatpickr to the 'to' flatpickr.
We also fix the date validation issue in the onClose handler inline.
Test plan.
1. Check that the from/to datpicker combinations work on each of the
changed pages.
2. Look at the console for errors, there should be none
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch fixes the serials search sidebar so that the "Expires before"
field uses Flatpickr instead of jQueryUI datepicker.
To test, apply the patch and go to Serials. Perform a subscription
search which will return multiple results.
In the sidebar, test that the "Expires before" field uses a
Flatpickr widget and works correctly.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch removes some jQueryUI datepicker code from
reports/cash_register_stats.tt which was left behind by Bug 28949.
To test, apply the patch and go to Reports -> Cash register statistics
wizard. The "From" and "To" date fields should work correctly, since
Flatpickr code is unchanged.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
When editing content that is a html customization, the 'cancel' link
should redirect to the html custom list, not the 'news' list.
Test plan:
Create or edit a html customization, click the 'Cancel' link
=> You should be redirected to the html custom list
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
To test:
1. Go to Tools > HTML customizations
2. Open or create a new entry with CodeMirror. ( Edit with text editor )
3. CodeMirror doesn't work, notice a console error.
4. Apply patch
5. Try steps 1 & 2 again. The CodeMirror editor should now load.
6. Make sure it works in both the Default and English(en) tabs.
7. BONUS: install some other language packs and look at the tabs for that language, it should still work.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
We are sending ymd but flatpickr is expecting a 'dateformat' formatted
date.
Test plan:
Create a new content, set a date, save, edit again
=> The date must be displayed correctly
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
It works! P1 and P2 are inverted in the test plan, but
the principle that user with manage permission accesses
bg jobs from the admin page and user who do not only
have access through main page is there.
Signed-off-by: Caroline Cyr La Rose <caroline.cyr-la-rose@inlibro.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
The preference OPACResultsUnavailableGroupingBy allows you to
group unavailable items by substatus, only showing item counts, on
the OPAC XSLT results.
This is meant to be useful for larger consortia.
Test plan:
Run dbrev.
Check new pref on Admin, preferences, OPAC tab.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This bug allows for batch printing of multiple article requests slips
To test:
1. apply this patch
2. restart_all
3. enable ArticleRequests preference
4. create multiple article requests
5. go to circ/article-requests.pl in staff interface
6. print a single slip from a row
CHECK => it works as expected
7. select all rows and print slip from general actions menu (above the table)
SUCCESS => all article requests slips are printed
8. select multiple rows (not all) and print slip from general actions menu (above the table)
SUCCESS => only selected article requests slips are printed
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
JD amended patch: Perltidy!
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch applies the changes describe in the main commit message about
the "limitation" and "the behaviour in master was buggy".
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Here we go!
Disclaimer: this patch is huge and does many things, but splitting it in
several chunks would be time consuming and painful to rebase. However it
adds many tests and isolate/refactor code to make it way more reusable.
This patchset will make the "batch item modification" and "batch item
deletion" features use the task queue (reminder: Since bug 28158, and so
21.05.00, we do no longer use the old "background job" functionality and
the user does not get any info about the progress of the job).
More than that, more of the code to build an item form and a list of
items is now isolated in module (.pm) and include files (.inc)
We are reusing the changes made by bug 27526 that simplifies the way we
edit/create items (no more unecessary serialization Koha > MARC > MARCXML
> XML > HTML)
New module:
* Koha::BackgroundJob::BatchDeleteItem
Subclass for process item deletion in batch
* Koha::BackgroundJob::BatchUpdateItem
Subclass for process item modification in batch
* Koha::Item::Attributes
We needed an object to represent item's attributes that are not
mapped with a koha field (aka "more subfields xml")
This module will help us to create the marcxml from a hashref and the
reverse.
* Koha::UI::Form::Builder::Item
The code that was used to build the add/edit item form is
centralised in this module. In conjunction with the
subfields_for_item BLOCK (from html_helpers.inc) it will be really
easy to reuse this code in other places where the item form is used
(acquisition and serials modules)
* Koha::UI::Table::Builder::Items
Same as previously for the table. We are now using this table from 3
different places (batch item mod, batch item del, backgroung job
detail view) and the code is only in one place.
To use with items_table_batchmod BLOCK (still from html_helpers.inc)
This patch is fixing some bugs about repeatable subfields and regex. A UI
change will reflect the limitation: if you want to apply a regex on a
subfield you cannot add several subfields for the same subfield code.
Test plan:
Prepare the ground:
- Make sure you are always using a bibliographic/item record using the framework
you are modifying!
- Add some subfields for items that are not mapped with a koha field
(note that you can use 'é' for more fun, don't try more funny
characters)
- Make some subfields (mapped and not mapped with a kohafield)
repeatable
- Add default values to some of your subfields
There are 4 main screens to test:
1. Add/edit item form
The behaviour should be the same before and after this patch.
See test plan from bug 27526.
Those 2 prefs must be tested:
* SubfieldsToAllowForRestrictedEditing
* SubfieldsToUseWhenPrefill
2. Batch modification
a. Fill some values, play with repeatable and regex.
Note that the behaviour in master was buggy, only the first value was modified by the regex:
* With subfield = "a | b"
1 value added with "new"
=> "new | b"
* With subfield = "a | b"
2 new fields "new1","new2"
=> "new2 | b"
Important note: For repeatable subfields, a regex will apply on the subfields in
the "concatenated form". To apply the regex on all the different subfields of a given
subfield code you must use the "g" modifier.
This could be improved later, but keep in mind that it's not a regression or behaviour
change.
b. Play with the "Populate fields with default values from default framework" checkbox
c. Use this tool to modify items and play with the different sysprefs that
interfer with it:
* NewItemsDefaultLocation
* SubfieldsToAllowForRestrictedBatchmod
* MaxItemsToDisplayForBatchMod
* MaxItemsToProcessForBatchMod
3. Batch deletion
a. Batch delete some items
b. Check items out and try to delete them
c. Use the "Delete records if no items remain" checkbox to delete
bibliographic records without remaining items.
d. Play with the following sysprefs and confirm that it works as
expected:
* MaxItemsToDisplayForBatchDel
e. Stress the tool: Go to the confirmation screen with items that can be
deleted, don't request the job to be processed right away, but check the
item out before.
4. Background job detail view
You must have seen it already if you are curious and tested the above.
When a new modification or deletion batch is requested, the confirmation
screen will tell you that the job has enqueued. A link to the progress
of the job can be followed.
On this screen you will be able to see the result of the job once it's
fully processed.
QA notes:
* There are some FIXME's that are not blocker in my opinion. Feel free to
discuss them if you have suggestions.
* Do we still need MaxItemsToProcessForBatchMod?
* Prior to this patchset we had a "Return to the cataloging module" link
if we went from the cataloguing module and that the biblio was deleted.
We cannot longer know if the biblio will be deleted but we could display
a "Go to the cataloging module" link on the "job has been enqueued"
screen regardless from where we were coming from.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Now that it's reusable, let use it somewhere else!
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
To ease reusability
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds a link to the account-details page for refund type
payout lines displaying on the register details page of cash management.
Test plan
1/ Enable 'UseCashRegisters'
2/ Add some transactions with at least one including a 'Refund'
3/ Look at the transaction history for the current register (Tools >
Cash management > Transaction history for X)
4/ Note the refund line does not contain a link to 'Details'
5/ Apply the patch
6/ The refund line should now have a 'Details' button on the right.
7/ Bonus points, perform a cashup and then search for older transactions
and check the 'Details' button appears in this table too.
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
The Rijksmuseum sponsored translation for Dutch-The Netherlands for
many years. More recently Saxion did the bulk of that work.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Ronald Wijlens <r.j.wijlens@saxion.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Bug 27944 added another block for the new stage introduced.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Show the TOC checkbox on OPAC and staff.
Test plan:
Add new article request on OPAC or staff. Tick checkbox.
Verify if TOC is Yes on opac-user or staff patron details.
Check the list view on circ/article-requests.pl.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>