Currently, once a user is discharged, lifting the discharge debarment does
not allow the user to ask for a discharge again.
This patch adds the ability for a user to be discharged several times and to
keep an history of the discharges.
Test plan:
- As a user, ask for a discharge.
- As a librarian, allow the discharge.
- Check that the requested and validated dates appear on the discharge panel of the borrower in the admin interface.
- Lift the discharge debarment of the user.
- Check that you can repeat these steps and that the new discharges are added in the discharge panel of the borrower in the admin interface.
Please note that you will need to run misc/devel/update_dbix_class_files.pl after the SQL update.
Adding a primary key to the discharges table was mandatory for DBIX::Class to be able to query with order_by.
Signed-off-by: Indranil Das Gupta (L2C2 Technologies) <indradg@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Adds other title type based on ind2 value. ind2 overridden by $i value.
Signed-off-by: Indranil Das Gupta (L2C2 Technologies) <indradg@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
The members.js was not included in member-password.tt
And it cannot, there are specific code which cannot be used outside of
memberentry.tt
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Bug 10177 rejects password with leading or trailing whitespaces, but
only on the member-password page.
It's not consistent to only do this check on 1 place.
This patch adds the check for the 2 other places: memberentry and at the
OPAC.
Test plan:
1/ Edit a patron and set a password with leading and/or trailing
whitespaces. You should not be allowed to do it (no server side check).
2/ Same at the OPAC ("Change you password" tab). Here there is a server
side check.
Followed test plan. Works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Test tt_valid.t warns that opac-retrieve-file.tt has no id and class
attribute on the body tag.
This patch adds them to clear the warning.
Test plan:
Apply patch and run xt/tt_valid.t.
Works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
The regex in this test looks like:
opac-search.pl\?idx=&q=%CE%91%CE%B8%CE%AE%CE%BD%CE%B1
The result it got was:
opac-search.pl?q=%CE%91%CE%B8%CE%AE%CE%BD%CE%B1
The empty idx should not be a reason to fail the test. I changed the
original regex to make the 'idx=&' part optional and added a base_unlike
test to verify that the base does not include a idx=\w+ anywhere.
Also corrected the typo Goog. Good!
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
All 66 tests now pass with me.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Running the test fails on test 7:
not ok 7 - upload succeeded
The changes on bug 14321 included a temp flag for script upload-file.pl.
Since this upload for stage-marc-import should be temporary, adding this
flag to line 131 resolves the problem.
Test plan:
Run the adjusted test.
NOTE: I still had some problems with this test. And will still be looking
to these errors (perhaps open a new report). But this fix should at least
fix the above-mentioned test.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Librarians should be warned that a patron is restricted when placing
holds, as they are warned that a patron's acount has expired.
Test Plan:
1) Apply this patch
2) Add a restriction for a patron
3) Attempt to place a hold for that patron
4) Note the notice at the top notifying you that the patron is restricted
Works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
If a patron owes more than the system preference maxoutstanding in fees
and fines, the patron will be unable to place holds via the opac.
However, a librarian placing a hold for a patron is not even warned!
Test Plan:
1) Apply this patch
2) Set maxoutstanding to 1.00
3) Find a patron owing more than 1.00
4) Attempt to place a hold
5) Note the warning that the patron owes money
Works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This has been introduced by bug 11703.
Bug 13190 should have been fixed it.
If the pref ExportWithCsvProfile is defined with a MARC CSV profile and
it contains item infos to display, only info from the checked out item
should be displayed.
Test plan:
0/ Don't apply this patch
1/ Create a biblio with 1+ items
2/ Check one of the item out to a patron
3/ Define a CSV profile which contains item fields ("245$a|952$p" for instance)
4/ Export the item (from circ/circulation/pl) using the CSV option
Note that the csv contains the barcode from all items
5/ Apply this patch and repeat 4.
6/ Note that the csv contains only the barcode from the checked out
item.
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works as advertised
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch makes following requested changes:
[1] Renamed categorycode to uploadcategorycode (with atomicupdate file)
[2] Confirmation before deleting an uploaded file
[3] Label for Public checkbox can be clicked
[4] Back button on result list (not in plugin mode)
[5] Correct additional variable interpolation from sql queries
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Tested the db revision, unit test.
Uploaded temporary and permanent file, incl. plugin mode.
Deleted an upload.
Ran stage-marc-import.pl.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Based on QA comments, this patch does the following:
[1] Destroy an empty DESTROY.
[2] Promote some comment lines to POD.
[3] Use File::Spec->catfile in sub _full_fname.
[4] Remove variable interpolation from a sql query.
[5] Add a comment in upload-file.pl.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Run the unit test again, and uploaded a file.
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Remove QA errors (keys on reference is experimental).
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The new Upload.pm, unit test and file-upload.js obsolete a number of
files, including an older jQuery plugin.
The test files progressbar.pl and progressbarsubmit.pl are outdated and
do not serve any purpose in this form. (Actually, we could argue if they
should be here or just be part of a debugging phase.)
Test plan:
[1] Git grep on file-progress, file-upload.inc, UploadedFile,
ajaxfileupload, ajaxFileUpload
UploadedFile: Only a reference to DBIx file is found
ajaxfileupload: Only release notes
[2] Upload a file with tools/upload and stage-marc-import.
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch makes the following changes to achieve that:
[1] Use Upload.pm in stage-marc-import.pl, upload-cover-image.pl,
offline_circ/process_koc.pl and enqueue_koc.pl.
[2] A new file-upload.js replaces file-upload.inc in the associated template.
We now use ajax to get progress figures instead of launching perl script
upload-file-progress.
The js changes now also allow for aborting a file upload.
[3] Adds a tools/upload script and template. It allows to upload multiple
files at once.
[4] Makes upload-file return error messages in JSON. For a multiple upload,
we could have some files with errors and others without errors.
The upload is now marked as Failed only if there was no upload at all.
[5] The upload plugin is converted to use tools/upload with plugin param.
Deleting an upload is now presented via the search results form.
NOTE: In editing the process_koc.tt I noticed that the form enqueuefile was
hidden and no longer used (with associated code in process_koc.pl). When a
file has been uploaded, I display the form again (with the Apply directly
button). The code still works.
NOTE: We fix an error in upload-file from one of the patches of bug 6874.
The userid of the Koha admin user is passed to haspermission, but we
should pick the userid from the session.
NOTE: Bug 14686 will add a specific permission for tools/upload.pl, and
will add the tools/upload script to the Tools menu.
For now, you need edit_catalogue to start upload.pl and you will
additionally need a permission like upload_local_cover_images
to successfully upload a new file.
Test plan:
[1] Upload a marc file in stage-marc-import. (This is temp storage.)
[2] Check new entry in table uploaded_files. Look for the file in your
temporary directory (/tmp ?), subfolder koha_upload.
Bonus: Remove permissions on this subfolder. Retry, check error and
restore permissions again.
[3] Upload another (larger) file and abort the upload. Check table and
directory again. You should have a partial file, but no record.
[4] Verify that Stage for import still works as expected.
[5] Test Upload local cover image. (Enable OPACLocalCoverImages.) You can
test an individual image or a zip file including images and a file
called datalink.txt (with lines biblionumber,filename).
[6] Test uploading a offline circulation file:
Enable AllowOfflineCirculation, and create a koc file (plain text):
Line1: Version=1.0\tA=1\tB=2
Line2: 2015-08-06 08:00:00 345\treturn\t[barcode]
Note: Replace tabs and barcode. The number of tabs is essential!
Checkout the item with your barcode.
Go to Offline circulation file upload. Upload and click Apply directly.
Checkout again. Upload again, click Add to offline circulation queue.
[7] Upload three files via tools/upload.pl with a category and marked as
public. Check the results in the table.
Verify that you can download the file in OPAC without being logged in.
[8] Pick one new file and one of the files of step 7. Upload them in the
same category. One upload should succeed. Check for reported error.
[9] Connect upload.pl to field 856$u.
Goto Cataloguing editor.
In an empty 856$u, click the tag editor. Upload a file and click Choose.
Save the record. Open the record in the OPAC and click the link.
Copy this link to your clipboard for next step.
[A] Go back to editor. Click the tag editor on the same 856 field.
Choose for Delete.
Open the link in your clipboard again. Error message?
[B] Check the process of upload, search, download and delete of an upload
with some diacritical characters in the filename. (Bonus points for
adding special chars in the category code.)
Note: You can add categories via authorized values, UPLOAD key.
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Bug 14321: [QA Follow-up] Perltidy upload.pl
Run perltidy -pro=xt/perltidyrc on tools/upload.pl.
No other changes.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch introduces Koha::Upload. It will replace the modules
C4::UploadedFile.pm and the new C4::UploadedFiles.pm (from BZ 6874).
It also includes a new unit test.
NOTE: This unit test will replace the test for UploadedFiles.pm. It will no
longer use dependency Test::CGI::Multipart. We are now mocking CGI and its
hook to achieve the same result.
Test plan:
[1] Run t/db_dependent/Upload.t.
Note that if you see a WARNING, you will still need to add an entry
upload_path to your koha-conf.xml. Or you need to give write
permission to your Koha instance user for that folder.
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds uploaded_files.public and permanent.
Public will be used later to mark uploaded files as available via OPAC.
Permanent will be used to make the distinction between temporary and
permanent storage.
The db rev sets both flags for all current records (uploaded via the
plugin from BZ 6874).
Test plan:
[1] If you tested this before, drop the column public first.
[1] Run the dbrev.
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
If a record has a hold on it where the pickup and home branch do not
match, the holds queue builder will only look at items from the least
cost branch ( as defined by the transport cost matrix or the sys pref
StaticHoldsQueueWeight.
Test Plan:
1) Create a record with two items, one for library A and one for library B
2) Set your circulation rules such that the book from library A is
holdable by all and the book from library B is holdable only by library
B patrons
3) Create a hold for a Library C patron for pickup at library C
4) Set the syspref StaticHoldsQueueWeight to by Library B, Library A,
Library C in that order
5) Rebuild the holds queue
6) Note the hold wasn't picked up even though the item from library A
could have filled the hold
7) Apply this patch
8) Rebuild the holds queue
9) View the holds queue again
10) Note the hold now displays
Signed-off-by: Nora Blake <nblake@masslibsystem.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Escapes single quotes from serial.serialseq string.
Test plan:
1. Have a serial with a number which has single quote in it.
2. Go to Serials -> Find some serial subscription -> Serial collection.
3. Set up a routing list for this serial.
4. Click on Print list under the column Routing.
5. Notice that the print window doesn't open.
6. Apply patch.
7. Notice that the print window opens.
Sponsored-by: Vaara-kirjastot
Followed test plan. Works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch introduces an extension to the current syntax for DOM index definition.
Specifically, it extends the 'index_subfields' tag to allow adding a 'condition'
attribute that is used as a condition ofr applying the specified index.
This (exotic) example is self-explanatory:
The previous syntax (which is keeped by this patch) took this snippet from biblio-koha-indexdefs.xml
<index_subfields tag="100" subfields="acbd">
<target_index>Encuadernador:w</target_index>
</index_subfields>
and generated an XSLT snippet in the DOM indexing XSLT that looks like this:
<xslo:for-each select="marc:subfield">
<xslo:if test="contains('acbd', @code)">
<z:index name="Encuadernador:w">
<xslo:value-of select="."/>
</z:index>
</xslo:if>
</xslo:for-each>
This patch introduces this syntax change (note the 'condition' attribute:
<index_subfields tag="100" subfields="acbd" condition="@ind2='7'">
<target_index>Encuadernador:w</target_index>
</index_subfields>
which yields to this XSLT snippet in the DOM indexing XSLT:
<xslo:if test="@ind2='7'">
<xslo:for-each select="marc:subfield">
<xslo:if test="contains('acbd', @code)">
<z:index name="Encuadernador:w">
<xslo:value-of select="."/>
</z:index>
</xslo:if>
</xslo:for-each>
</xslo:if>
To test:
- Verify that the shipped XSLT files are current regarding the shipped index definitions:
$ for i in marc21 normarc unimarc; do
xsltproc etc/zebradb/xsl/koha-indexdefs-to-zebra.xsl \
etc/zebradb/marc_defs/$i/biblios/biblio-koha-indexdefs.xml \
> etc/zebradb/marc_defs/$i/biblios/biblio-zebra-indexdefs.xsl
done
$ git status
(repeat for authorities, skip normarc which doesn't have authorities)
- Apply the patch
- Re-run the previous commands
=> SUCCESS: no changes
- Add a condition to an index_subfields tag (for example, condition="@ind2='7'" in the Author's index
- Regenerate the specific XSLT
=> SUCCESS: doing a diff shows the only change is the code has been wrapped inside an xslo:if using the condition for the test
- Apply the generated xsl to a MARCXML record that has a field matching the condition like this:
$ xsltproc .../biblio-zebra-indexdefs.xsl sample_record.xml
=> SUCCESS: There's an index on the result, containing the configured field/subfields, that matches the criteria.
- Sign off and feel really happy :-D
Note: the attached sample record includes a 100 field, with ind2=7 and $a=Tomasito
Edit: This patch was squashed once I figured it got too complex and Jonathan required a followup
to avoid code duplication.
This avoids code duplication, with the same results.
Sponsored-by: Orex Digital
Signed-off-by: Barton Chittenden <barton@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This bug removes deprecated C4::Dates from reserve/request.pl
To test:
- Apply patch
- In staff client, search a biblio and try to put a hold for a borrower (Home > Catalog > [Some Biblio] > Place a hold to [Some biblio])
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
There is no special need to format the date in the perl script.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This bug removes deprecated C4::Dates from catalogue/detail.pl
To test:
Apply patch
Go to Home > Catalog > Details for [some biblio with items and holdings]
Make sure that biblio and Holdings and Acquisition details display as appropriate
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Bug 14879 - Remove C4::Dates from catalogue/detail.pl
Remove forbidden patterns (tab) to pass QA tools
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The current tests were expecting the first defined branch to be CPL. That's
not the case on my box so they failed. This patch adds the creation of two
new random branches/branchcodes, and replaces the legacy use of CPL and MPL
in favour of the new ones.
It relies on TestBuilder for the task.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
It is possible to create holds with duplicate priorities.
The reason for this is that typically the priority is calculated before
placing the hold. When the hold is placed the priority is calculated.
This can easily be shown by opening up two browser windows and starting
to place a hold for a record in each one. You'll see that both list the
same priority. If you than place the hold in each window, both holds
will have the same priority!
Test Plan:
1) Run unit tests pre-patch, note they fail
2) Run unit tests post-patch, note they succeed
Signed-off-by: Heather Braum <hbraum@nekls.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Heather Braum <hbraum@nekls.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Note: Made a little change, changed He should have, to They should have
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Note without this patch, you won't be able to access the SCO side.
So don't panic if you cant use SCO with just the first patch
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
There is a security issue in the self checkout module.
The user used to check items out must have the circulate =>
circulate_remaining_permissions permissions.
So even if a user does not have a login/password or a barcode he cans
access to the circulation module of the intranet.
Imagine if the sco patron used is a superlibrarian...
This patch set will change the behavior and adds a new permission to
access to the sco module (circulate => self_checkout).
This permission should be the only one defined for this patron.
IMPORTANT NOTE: Hopefully, this only works if both interfaces use the
same domains (but different ports).
Test plan:
0/ Does not apply this patch set
1/ Create a patron with the circulate => circulate_remaining_permissions
and some others. Note his userid/pwd (later 'sco/sco').
Turn on WebBasedSelfCheck and AutoSelfCheckAllowed
Fill the AutoSelfCheckID and AutoSelfCheckPass wich 'sco' and 'sco'
2/ Log you out from the OPAC and the intranet
3/ Go on the sco page
4/ Note that your are automatically logged in
5/ Go on the circulation module on the intranet side
6/ Oops
7/ Apply this patch
8/ Execute the updatedatabase
9/ Note that the sco user only has the new permission circulate =>
self_checkout, others have been removed
10/ Try to reproduce the issue, it should not access anything on the
intranet side
11/ Confirm that there is no regression in the sco module
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Works well no regressions, changes the permissions appropriately.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Follow-up for reports.
Test plan:
1/ Use a translated template (fr-FR or ar-Arab)
2/ Go on the report guided page, step 3
3/ The field names should be correctly encoded.
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Test plan:
1/ Use a translated template (fr-FR or ar-Arab)
2/ Go on the tools/import_patrons.pl page
3/ The field names in the "default values" block should be correctly
encoded.
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Test plan: See Bugzilla.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Koha needs a script to automate the importing of Lexile score data for
titles that have available scores but are not currently in the title's
record.
This script will take a CSV file of Lexile scores, and locate any
matching records in the Koha database ( by ISBN ). If the record already
has a score, it will be updated. If not, the Lexile score field will be
created.
Test Plan:
1) Apply this patch
2) Catalog a record for each of the following ISBNs:
0789170191
9780673779410
3) Download the file LexileTitlesTruncated.txt attached
to this bug report
4) Run the script from the command line:
./misc/migraction_tools/import_lexile.pl -v --file /path/to/LexileTitlesTruncated.txt
5) View those records in Koha
6) Note those records now have valid Lexile scores
7) Edit the Lexile score ( 521$a ) and change the value to something else
8) Repeat step 4
9) Note the original Lexile score has been restored
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
If (for some reason) the user has created more than one matching rule
with the 'ISSN' code, the updatedabase.pl script fails, because it was
written with the default data in mind, and didn't consider the scenario
described above.
Thanks Liz for pointing this out!
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
To test:
1) Go to home page of staff client and click the Help
2) Notice: 'you should now 'got to' Koha'
'settings found in 'a'dministration.' (should be capitalized)
'Once that user is set you should use that user to log in rather than the root user set up as part of installation.' (could be worded better)
3) Apply patch, close Help, reload page, reopen Help
4) Notice: 'got to' --> 'go to'
'administration' --> 'Administration'
'Once that user is set you should use that user to log in rather than the root user set up as part of installation.'
Signed-off-by: Joonas Kylmälä <j.kylmala@gmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
