In the circulation rules, the loan period displayed in the table
of circulation rules is not translatable, always displaying in English.
This causes an issue when editing a circ rule with unit hours in any
other language than English.
When editing these rules, instead of hours, days will be preselected.
To test:
- Before applying the patch:
- Install a translation
- Activate and switch to the tranlation
- Create a circulation rule using 'hours' as the unit
- Edit the circulation rule
- Verify that instead of 'hours' 'days' will be selected in the pull-down
- Apply patch
- Update po files (kshell, cd misc/translator, perl translate update <langcode>)
- Edit po file <langcode-staff..., search for Hours and translate line,
make sure to also remove fuzzy, and that your translation matches the
pull down values for your language
- Reinstall translation
- Repeat circ rule edit test
- Verify the unit now shows up with your translation and editing works
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Note: this fixes the bug that is present right now where batch item
modification barcode matching is case sensitive, but if Koha barcodes
ever do become case sensitive, this patch will need to be removed.
To test:
1) Make/use an item with a barcode with letters in it. For testing
purposes, I'll be using an item with the barcode 'abcde'.
2) Go to Tools -> Batch item modification and enter this barcode in the
barcode list text input field, but change the case of one or some
letters. (i.e. enter the barcode in the field as 'abCDE')
3) Click Continue
4) Notice that the next page shows an error 'the following barcodes were
not found', but the item still shows underneath (was correctly fetched from database).
5) Create a text file and put the changed-case barcode in it (i.e. put
the barcode 'abCDE' in the text file)
6) Go back to batch item modification and upload the
text file as a barcode file
7) Notice same error as in Step 4
8) Apply patch and refresh page
9) Run through steps 1 to 6. There should no longer be an error and the
barcodes should be found as expected.
Sponsored-by: South Taranaki District Council
Signed-off-by: Maryse Simard <maryse.simard@inlibro.com>
Signed-off-by: Kyle Hall <kyle@bywatersolutions.com>
Signed-off-by: Donna Bachowski <donna@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
In value_builder/unimarc_field_4XX.pl value_builder gets search results
and runs a for loog with $i index. This loop is limiter with number of
results par page, it should also be limited by number of results if
lower that number of results par page.
Same in cataloguing/value_builder/marc21_linking_section.pl.
Test plan :
1) configure framework to use value builder
2) use value builder
3) perform a search with number of results lower than number of results
per page
4) check number of records diplayed is OK
5) perform a search with number of results upper than number of results
per page and check number of results is OK
6) you see number of results par page records and pagination link
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
The serial navigation shows a little stangely on the
serial subscription detail page and other pages that show
information about a specific subscription with one of the menu items
having a different display height than the other items.
To test:
- Go to the serials module
- Add or search for an existing subscription
- Go to the subscription detail page
- Verify the display issue in the navigation on the left
- Apply patch
- Check again from different pages in the serials module
- Verify display is improved
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch makes a few corrections to the process of printing patron
cards from the patron lists page. These changes are necessitated by Bug
20650: Changes to the markup in patroncards/print.tt were not reflected
in the JavaScript in patron_lists/lists.tt.
Also fixed: A missing quotation mark, a missing semicolon, and
incorrect template variable filter.
To test, apply the patch and go to Tools -> Patron lists.
- Click the "Actions" menu corresponding to a patron list.
- Select "Print patron cards."
- In the "Print patron cards" modal, click the "Export" button.
- The modal should reload with a link to download a patron card PDF.
The link should work correctly.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
If strict SQL modes are set, the insertion of a new Z3950 server can
fail.
DBIx::Class::Storage::DBI::_dbh_execute(): Incorrect integer value: ''
for column 'checked' at row 1 at
/home/vagrant/kohaclone/admin/z3950servers.pl line 82
Using Koha::Z3950Servers fixes the issue (handled from
Koha::Object->store)
Test plan:
- Turn the strict SQL modes on (config strict_sql_modes)
- Create a new Z3950 server filling only the mandatory fields.
=> Without this patch you will get the failure, with this patch applied
the server will be inserted sucessfully
- Delete it
=> No regression should be found
- Search for servers
=> No regression should be found (the search is a start-with, LIKE "$pattern%")
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
The code expects to display OpacNavRight content at the bottom of the
login form when a user just registered.
Test plan:
- Turn PatronSelfRegistrationVerifyByEmail on
- Register a patron
- Confirm by clicking on the link you received by email (or see the
message_queue table)
=> The OpacNavRight content should be displayed
QA Note: This code smells, the code in the pl should not be needed.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
There are other occurrences of OpavNavRight that bug 22318 forgot to
adjust to use the news system instead of the syspref.
Test plan:
- turn off opacuserlogin
- create a news for OpacNavRight
- go to the opac main page
=> Confirm that the OpacNavRight content is displayed correctly.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
DBIx::Class::Row::store_column(): No such column 'changed_fields' on
Koha::Schema::Result::Borrower at /home/vagrant/kohaclone/Koha/Object.pm
line 75
Test plan:
- Turn PatronSelfRegistrationVerifyByEmail on
- Register a new account
- Click on the link (see the message_queue table)
=> Without this patch you get the error
=> With this patch you will see the login form
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
It will fix the insert of new subfields with SQL strict modes
DBD::mysql::st execute failed: Incorrect integer value: '' for column
'hidden' at row 1 [for Statement "
Test plan:
- Turn the config strict_sql_modes ON
- Add a new subfield to a field
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Test plan:
prove t/db_dependent/Koha/Biblio.t
Should return green
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Test plan:
1) Set 'CheckPrevCheckout' system preference to 'Do'
2) Make a checkout with item from serial record (942$s is 1 on default
settings)
3) Return that checkout
4) Try to check it out again, you should see an alert, that the patron
has thi item checked out previously
5) Try to checkout another item from same bibliographic record, you
sholud not see the alert and item should be checked out
6) prove t/db_dependent/Patron/Borrower_PrevCheckout.t
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
The parameter <<>> does not work. There should be text inside.
The construction .*? does not look good completely.
Replacing it by the stricter [^>]+ So, no greater than's and at least one.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
To test:
1 - Apply patch
2 - Write a report that takes no variables
3 - Run this using runreport.pl
perl misc/cronjobs/runreport.pl 1
4 - Confirm results as expected
5 - Write a report that takes one or more variables
6 - Run using runreport.pl, but pass no params
7 - You should get a SQL error
8 - Now run passing the correct number of params
perl misc/cronjobs/runreport.pl --param first --param=2nd 2
9 - Verify results as expected
10 - call runreport with no parameters
perl misc/cronjobs/runreport.pl
11 - Verify documentation is correct and helpful
Signed-off-by: Claire Gravely <claire.gravely@bsz-bw.de>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
In "Calendar" tool it's possible to pick dates before start
date as end date.
This patch sets end date calendars "minDate" as picked start day
to grey out past dates. Also reindents datepicker code for
better readability.
Test plan:
- Apply this patch
- Set start date from first calendar
- Set end date from second calendar
=> Dates before start date are greyed out
Signed-off-by: Nadine Pierre <nadine.pierre@inLibro.com>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
As per test feedback I've changed wording from debarrment to restriction
Added insertion into the borrower_debarments table and removal from
borrower_debarments table (and borrowers.debarred and
borrowers.debarredcomment) when either 'Restriction
expiration' or 'Restriction comment' are ticket to be disabled/deleted.
Test plan (please follow this instead of following test plan in the
first patch):
1. Go to Tools > Batch patron modification
2. Input the cardnumbers of several (undebarred/unrestricted) patrons
and submit
3. Notice there is no input for setting Restriction expiration date or
Restriction comment
Also notice in the list of matching borrowers at the top of the page
there is no display of the 'Restriction expiration' or 'Restriction
comment' values for the patron
4. Apply patch
5. Restart memcached and plack
6. Refresh the page notice 'Restriction expiration' (a date picker
input) and 'Restriction comment'are now input options
Also notice in the table at the top of the page 'Restriction
expiration' and 'Restriction comment' are shown on the far right of the table (you may need
to scroll to see this)
7. Pick a date in the 'Restriction expired' datepicker and write in text into
the 'Restriction comment' field and submit
8. Notice in the next loaded page the selected patrons have the
'Restriction expiration' and 'Restriction comment' values you entered
9. Query the borrower_debarments database table and check that the new
debarments are added to this table
10. Go back to the Batch patron modification page and re-input the same
cardnumbers
11. Write text into the 'Restriction comment' field and don't pick a
'Restriction expiration' value and submit
12. Notice in the next loaded page the selected patrons have the
'Restriction expiration' value of 9999-12-31 and 'Restriction comment'
value you just entered
13. Query the borrowers table and notice the borrowers.debarred value
for the modified patrons is '9999-12-31' and the
borrower.debarredcomment is what you inputted in step 11
14. Query the borrower_debarments table and notice the expiration value
is NULL and the comment value is set to what you entered in step 11
Also note the addition of the new debarment has not removed the existing
debarment on the patrons
15. Click on the cardnumber link of one of the patrons and notice the red
text on their patron account page informing you they are restricted
until the date you set
16. In the Koha home directory enter Koha shell:
sudo koha-shell <instancename>
17. Run: prove xt
18. All tests should pass
19. Repeat step 10 and tick the checkbox beside the 'Restriction
expiration' field and submit
20. In the next loaded screen notice the 'Restricted expiration'and
'Restricted comment' are empty
Check the borrower_debarments table and notice all restrictions for the
patron are removed.
Check the borrowers table and notice the debarred and debarredcomment
fields are empty for the patrons
21. Repeat steps 10 and 11 to make a new restriction
22. Repeat step 19 and this time check the 'Restriction comment' field
and submit and observe that also clears the restriction in the next
loaded page, in the borrower_debarments and borrowers table
23. Sign off
Sponsored-By: Brimbank Library, Australia
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Test plan:
1. Go to Tools > Batch patron modification
2. Input the cardnumbers of several (undebarred/unrestricted) patrons and submit
3. Notice there is no input for setting a debarred until (restriction
expiration) date or debar comment
Also notice in the list of matching borrowers at the top of the page
there is no display of the debarred or debarredcomment values for the
patron
4. Apply patch
5. Restart memcached and plack
6. Refresh the page notice 'Debarred till' (a date picker input) and
'Debarred comment' are now input options
Also notice in the table at the top of the page 'Debarred till' and
'Debarred comment' are shown on the far right of the table (you may need
to scroll to see this)
7. Pick a date in the 'Debarred till' datepicker and write in text into
the 'Debarred comment' field and submit
8. Notice in the next loaded page the selected patrons have the
'Debarred till' and 'Debarred comment' values you entered
9. Click on the cardnumber link of one of the patrons and notice the red
text on their patron account page informing you they are restricted
until the date you set
10. In the Koha home directory enter Koha shell:
sudo koha-shell <instancename>
11. Run: prove xt
12. Confirm all tests pass
13. Sign off
Sponsored-By: Brimbank Library, Australia
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
We should be able to set system preference overrides for SIP in a
similar manner that we do in Apache. It would be great if we could
specify those overrides on both a config level, and login level basis.
Test Plan:
1) Apply this patch
2) Start your SIP server
3) Enable the syspref AllFinesNeedOverride
4) Find or create a patron with a small fine ( less than noissuescharge )
5) Attempt to check out an item to the patron, it should fail
6) Add the global syspref override from the bottom of the example SIP config file
7) Restart your SIP server
8) Attempt to check out an item to the patron again, this time it should work
9) Now, add the login level syspref override section as it appears in
the eaxmple SIP config file. Make sure to add it to the login you are using
10) Attempt to check out another item to the patron, this time is should
again fail
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: George Williams <george@nekls.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: George Williams <george@nekls.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch adds the ability to rename columns in MySQL reports using a syntax:
[[column|alias]]
To test:
1 - Write a report like:
SELECT cardnumber FROM borrowers WHERE cardnumber LIKE '%9'
2 - Run report
3 - Note you can batch modify the patrons
4 - Update report:
SELECT cardnumber AS library_barcode FROM borrowers WHERE cardnumber LIKE '%9'
5 - Run report
6 - Note batch options are no longer present
7 - Apply patch
8 - Run report, no change
9 - Update report like:
SELECT [[cardnumber|library_barcode]] FROM borrowers WHERE cardnumber LIKE '%9'
10 - Run report
11 - Batch options work!
12 - Update report like:
SELECT cardnumber FROM borrowers WHERE cardnumber LIKE '%9'
13 - Verify batch options still work
14 - Set report 'public'
15 - Verify report can be run via JSON URLs:
http://kohadev.mydnsname.org:8080/cgi-bin/koha/svc/report?id=1http://kohadev.mydnsname.org:8081/cgi-bin/koha/svc/report?id=1
Signed-off-by: George Williams <george@nekls.org>
Signed-off-by: George Williams <george@nekls.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This follow-up adds a dummy href attribute to the link for showing and
hiding the default values form so that it behaves more like a link.
I removed "click to" from the link text and added Font Awesome icons
common to "show/hide" links.
Signed-off-by: George Williams <george@nekls.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
To test:
1 - Go to Tools->Import patrons
2 - Choose a file
3 - Scroll a long way to submit
4 - Apply patch
5 - Choose a file
6 - Can submit easily
7 - Click to expand and enter default fields
8 - Confirm can still submit and that values entered are used
Signed-off-by: Maryse Simard <maryse.simard@inlibro.com>
Signed-off-by: George Williams <george@nekls.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
In intranet after a search you see a results browser top left of biblio record details.
Actually this uses text for links next and previous with a character for the arrows.
I propose to use Font Awesome icons arrows.
In fact the translated text is often too large for those buttons.
For example "Previous" is "Préédant" in french and it causes the next and previous buttons to display on two lines.
Using icons is more compact and easy to use.
This patch also adds the list icon to back to results link and changes for a minimal text "Results".
1) Go to intranet
2) Perform a search with a few results
3) Click on first record
4) Check browser displays well
5) Click on next icon, check you go to next search result
6) Click on revious icon, check you go to previous search result
7) Click on "Results", you come back to search results
8) Clik on "Last" and click on last record
9) Check browser displays well
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Changed the POD of the new method to use holds.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
TO test:
1 - Find and adult patron
2 - Add a child account
3 - Check out some things to the child
4 - View the adults account, click 'Relatives checkouts'
5 - Observe table is oddly formatted
6 - View on both the 'Check out' and 'Details' tabs
7 - Apply patch
8 - Tables are displayed correctly
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
To test:
1 - Hit neworderbiblio with a query and no vendor
http://localhost:8081/cgi-bin/koha/acqui/neworderbiblio.pl?q=cat
Or, add to basket from existing record with a search
Refresh the page (url has no parameters)
2 - Get an internal server error
3 - Add bookseller
http://localhost:8081/cgi-bin/koha/acqui/neworderbiblio.pl?q=cat&booksellerid=1
4 - Click 'Order' on a result
5 - Internal server error
6 - Apply patch
7 - Repeat 1-4, you get 'Vendor not found' or 'Basket not found'
Signed-off-by: Maryse Simard <maryse.simard@inlibro.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch adds the "noExport" class to the table header for the Z39.50
search results "Actions" column. This class prevents the column from
being included in DataTables export operations.
To test, apply the patch and perform a Z39.50 search from Cataloging. On
the search results page, click the "Export or print" button. Choose one
of the export options and verify that in the resulting data there is no
"Actions" column.
Signed-off-by: Maryse Simard <maryse.simard@inlibro.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Reproduce issue:
- Enable "EnableAdvancedCatalogingEditor" preference
- Go to cataloguing and click on advanced editor
- Click on the down arrow in "Save to catalog" menu
- You should see an undefined named save backend
Test patch:
- Enable "EnableAdvancedCatalogingEditor" preference
- Go to cataloguing and click on advanced editor to save preference to
the cookie
- Click on the down arrow in "Save to catalog" menu
- You should see a "Duplicate" named backend
Test Bug 16232 for no regression:
- Search for a biblio in catalog
- Click in "Edit record"
- Advanced editor should appear.
SUCCESS => browser url ends with #duplicate/{original biblionumber}
=> Title above toolbar is "Editing duplicate record of
#{original biblionumber}"
- Save
SUCCESS => browser url ends with #catalog/{new biblionumber}
=> Title above toolbar is "Editing catalog record #{new
biblionumber}"
More test:
- Search for a biblio in catalog
- Click on "Edit record"
- Advanced editor should appear
- Click on the down arrow in "Save to catalog" menu and click on
Duplicate,
- Record should be saved as a new one (same behavior)
Signed-off-by: cori <corilynn.arnold@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Bug 11492 intended to pass routinglists forward. It also passed forward serial notes.
This may or not me desired behvaiour, to avoid changing functionality twice I add a syspref
to control this behaviour.
To test:
1 - Have or create a subscription in the serials module
2 - Recieve an issue, making sure ot ad a note
3 - Go to receive again, note the note from the last serial is set for the expected issue
4 - Apply patch
5 - Update database, restart all the things
6 - Receive the issue leaving the note in place
7 - Note the next expected issue has the note
8 - Find the syspref PreserveSerialNotes
9 - Confirm it defaulted to Do
10 - Set it to 'Do not'
11 - Receive the expected serial leavign the note
12 - Note the newly generated expected serial has no note
13 - prove -v t/db_dependent/Serials.t
Signed-off-by: Nadine Pierre <nadine.pierre@inLibro.com>
Signed-off-by: Maryse Simard <maryse.simard@inlibro.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch corrects a problem with hold confirmation dialogs on the
checkin page when the HoldsAutoFill system preference is enabled and the
item being checked in has a hold at another library.
The confirmation dialog is converted to a modal to match other
confirmation information.
As part of this process two whole sections of the template have been
removed because they were redundant.
To test, apply the patch and test the following circumstances both with
HoldsAutoFill enabled AND disabled:
- A hold for a patron at your library
- A hold for a patron not at your library
- With HoldsAutoFill ON, both the "OK" and "Print slip and confirm"
buttons should dismiss the modal without reloading the page.
- A hold which is already marked 'Waiting'
- An item which needs to be transferred
- An item which has already been transferred
In all cases the confirmation modal should appear with correct
information.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
The changes to columns_settings.inc in bug 23307 inadvertantly change
the return from an updated jQuery datatable object to a plain jQuery
object and as such broke a number of tables in Koha. This patch simply
reverts the change whilst continuing to allow the new functionality to
work as expeced.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch adds columns configuration to the DataTable which displays
Z39.50 search results in the cataloging module.
The Z39.50 results screen has its own server-side paging system, so I
added some code to copy the page number information ("Page 2 / 6") to
the DataTable toolbar for a more consistent appearance. The wording of
that information has also been modified for consistency's sake.
To test, apply the patch and restart Plack (or restart_all on
kohadevbox)
- Go to Cataloging -> New from Z39.50/SRU.
- Perform a Z39.50 search which will return multiple pages of results.
- Confirm that the DataTable controls work correctly: Search, columns
show/hide, export.
- Confirm that the page number information is correct as you navigate
through pages of results.
- Go to Administration -> Columns settings.
- Confirm that the columns configuration settings for the z3950_search
table in the "Cataloging" section works correctly. Changes made here
should be reflected in the table of Z39.50 search results.
- Test other tables which use columns configuration to confirm that the
changes made in this patch doesn't disrupt their behavior. Test that
any custom columns configuration are applied. For example:
- Administration -> Libraries
- Reports -> Saved reports
- Circulation -> Holds queue
Signed-off-by: George Williams <george@nekls.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch makes a number of interface changes to the Stock Rotation
management interface:
- "Add stage" and "Add items" forms are now triggered by clicking new
buttons in the toolbar.
- "Manage stages" and "Manage items" menu items have been added to a
sidebar menu to be displayed when stages or items are being managed.
- JavaScript has been added to move focus to the first form field in
the modal when it is displayed. The "autofocus" attribute is not
sufficent here because the modal is hidden by default.
- Add messages to be shown when there are no items or stages to be
displayed.
- Correct "selected" attributes to use XHTML-style: selected="selected"
(https://wiki.koha-community.org/wiki/Coding_Guidelines#HTML_Templates)
To test, apply the patch and go to Tools -> Stock rotation.
- Create a rota if you don't already have one.
- Manage stages for your rota.
- If your rota has no stages you should see a message along with an
"Add stage" button. The button should trigger the "Add stage"
modal.
- Test the "Add stage" button in the toolbar. It should trigger a
modal dialog containing the form for adding a new stage. The
cursor focus should automatically be on the "library" field.
- Submitting the form should correctly add the stage.
- Verify that there is a new menu in the sidebar, "Manage stages"
and "Manage items."
- Manage items for your rota.
- If your rota has no items you should see a message along with an
"Add items" button. The button should trigger the "Add items"
modal.
- Test the "Add items" button in the toolbar. It should trigger a
modal dialog containing the form for adding new items. The cursor
focus should automatically be on the "barcode" field.
- Submitting either a barcode or a file of barcodes should work
correctly.
- Verify that the new menu items are shown in the sidebar.
Signed-off-by: Maryse Simard <maryse.simard@inlibro.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
