Signed-off-by: Jonathan Field <jonathan.fieeld@ptfs-europe.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Tidy the relevant lines to pass the new QA rules
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
We need to clear the cache when changing rules/statuses
To test:
1 - prove -v t/db_dependent/Holds/DisallowHoldIfItemsAvailable.t
Signed-off-by: Sam Lau <samalau@gmail.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
There are several places in the code where we precalculate ItemsAnyAvailableAndNotRestricted to avoid
looping on this routine when calling IsAvailableForItemLevelRequest on a list of items form a biblio
The value of ItemsAnyAvailableAndNotRestricted is only used when there is a circulation rule for
'onshelfholds' with a value of '2' (If all unavailable)
Rather than calculate a value that may never be used, let's cache this value per request when we do
calculate it - and reuse the cached value
To test:
1 - Apply patch
2 - Set circulation rule 'On shelf holds allowed' as 'If all unavailable'
make sure the rule applies to all of the items/patrons you test with
3 - Find a record with two items that are available
4 - Try to place a hold for a patron - not allowed
5 - Check out one item to another patron
6 - Attempt hold - still not allowed
7 - Check out second item to another patron
8 - Attempt hold - allowed!
9 - Apply patch
10 - Cancel and replace hold - it is allowed!
11 - Check in one item, and cancel hold
12 - Place hold - not allowed!
13 - Check in second item
14 - Place hold - not allowed!
15 - prove -v t/db_dependent/Holds/DisallowHoldIfItemsAvailable.t
Signed-off-by: Sam Lau <samalau@gmail.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
to test...
1/ run command
$ sudo koha-passwd dev1
Password for dev1: CraZyPa$$WoRD!!
Press enter to clear the screen...
^C
2/ apply patch
3/ run command again, note 'username' section
$ sudo koha-passwd dev1
Username for dev1: koha_dev1 <<<<<<<<<<<<
Password for dev1: CraZyPa$$WoRD!!
Press enter to clear the screen...
^C
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
When creating a circ rule, we can set overduefinescap to blank or 0 and no cap is enforced. If we edit that rule, the blank/0 is converted to "0.00" which perl considers true, thus zero-ing out any calculated fine.
Considering we've always ignored an overdue fines cap of 0, we should also ignore 0.00. However, perl is evaluating it as a string which makes it true instead of false as 0 is.
Test Plan:
1) Apply the first patch ( unit tests )
2) prove t/db_dependent/Circulation/CalcFine.t
3) Note the test fails
4) Apply the second patch as well
5) prove t/db_dependent/Circulation/CalcFine.t
6) Note the test passes
Test Plan 2:
1) Create an all/all/all rule with an overduefinescap of 0.00, with a
daily fine. Enable CalculateFinesOnReturn
2) Backdate a checkout so it is overdue
3) Return this item, note the lack of a fine
4) Apply this patch set
5) Backdate a checkout and return it again
6) Note the fine is generated!
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The logic introducing the can_be_blank check into the monetary decimal
format check was flawed and meant we were no longer checking decimal
formatting in the majority of cases. This patch updates that so we pass
the unit tests and correctly check any value passed that's not an empty
string.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Add a unit test for the allow blank option added to the monetary check
in CirculationRules.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Anneli Österman <anneli.osterman@koha-suomi.fi>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Resolves:
The file is less tidy than before (bad/messy lines before: 94, now: 101)
Test plan:
Run qa tools.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
[EDIT] Removed skip_record_index => 1 from automatic_renewals.pl. See BZ.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Test plan:
Before applying patch:
* Open incognito at /cgi-bin/koha/ill/ill-requests.pl,
* Verify order is by ASC (lowest ID first)
* Close incognito
Apply patch, then:
* Open incognito at /cgi-bin/koha/ill/ill-requests.pl,
* Verify order is by DESC (highest ID first)
Signed-off-by: Magnus Enger <magnus@libriotech.no>
Followed the test plan from Bugzilla, and added it above.
Works as advertised.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch carries this fix into the misc/cronjobs/recalls/expire_recalls.pl cronjob so that recalls are automatically expired when they have been waiting a problematic number of days, not considering hours, as expected.
To test, follow the test plan from the first patch. This will set you up with a waiting problematic recall.
Run the cronjob manually
perl misc/cronjobs/recalls/expire_recalls.pl
Refresh your 'Recalls awaiting pickup' page. Your problematic recall should be gone/expired.
Expiration dates will apply when expiring any 'unfulfilled' recall i.e. newly requested, overdue to be returned, and awaiting pickup.
Sponsored-by: Auckland University of Technology
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch makes the code not require two decimal digits, as the main
intention here is to forbid (locale) formatted strings to reach the DB.
The number of digits we support needs to be discussed on its own bug,
and a centralized check implemented.
This patch fixes tests:
prove t/db_dependent/Circulation.t
t/db_dependent/Circulation.t .. 1/67 Exception 'Koha::Exceptions::CirculationRule::NotDecimal' thrown 'The circulation rule expected a decimal value' with name => fine, value => 0.1
t/db_dependent/Circulation.t .. Dubious, test returned 11 (wstat 2816, 0xb00)
Failed 53/67 subtests
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Add unit tests for is_monetary functionality introduced in the
CirculationRules module.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
While testing this bug I found Circulation.t was failing, but the
exception doesn't actually display anything useful in terms of helping
debug what's going on.
This patch makes it add the rule_name and rule_value to the message.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This rewrite the database update with some things in mind:
* We now use a positive value list of allowed characters to check
This makes sure that all of those are recognized:
1,00
1.00€
abc
* Instead of dying after finding one wrong value, we loop through
all values first, building up an error string
* When we have errors... we die and print the full list of things
that need fixing.
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
With this patch, all monetary values in the table will be displayed
formatted.
Also, the input will be checked against our agreed pattern to make
sure no false values can be entered.
Missing: When editing a rule, we need to unformat the value, so that
instead of the display format we have the input format available
for editing.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch marks the 2 missing monetary values for recal over due fines
and article request fees as monetary.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
We want to recognise the truthyness of a number vs string so we drop
trailing decimals if they're just 0.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch moves the defintion of monetary rule type into the rule kinds
hash.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
When currency format is set on FR commas are decimals separators
but when cron like fines.pl try to calculate fines it's fails due to
this format.
I changed this behavior by targetted 'fine' and 'overduefinescap' in
circulation_rules.rule_name to unformat them when we save them.
This also fix the display in smart_rules table (before with commas price
was not good displayed - without decimals)
Test Plan :
1) Set your currency format on 'FR' and 'fine' OR/AND 'overduefinescap'
with commas
2) Be sure to have some patron overdues
3) Run ~/misc/cronjobs/fines.pl with args to find overdues
4) See an error like 'isn't numeric in substraction[..] or gt > [...]'
5) Run updatedatabase script (it will replace commas in your rules
changed in step 1) )
6) Repeat step 3 and see that everything was going "fine" (🎉)
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
See also BZ report. As suggested by Tomas.
NOTE: The dbrev is extended too for removing records with a failing guarantor_id
foreign key (theoretically not present obviously).
Test plan:
1) cp installer/data/mysql/db_revs/220600048.pl installer/data/mysql/atomicupdate/
2) Run updatedatabase.pl
3) Remove copied file
Bonus:
Manually remove FK constraint before running updatedatabase.
Insert a record with bad guarantor_id into relationships manually.
Run the update again.
You should not see the message that the constraint is removed.
Is the bad record count reported and record removed?
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
[EDIT] Simplified. No longer removes the FK. Just disables during ALTER.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Test plan:
Run t/00-testcritic.t
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
JD amended patch: tidy
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Bug 33030 implements a new helper subroutine to standardize processing of Template Toolkit syntax outside slips and notices. We should use this subroutine in EmailReport.
Test Plan:
1) Apply this patch
2) prove t/db_dependent/Reports/Guided.t
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Bug 33030 implements a new helper subroutine to standardize processing of Template Toolkit syntax outside slips and notices. We should use this subroutine in C4::Serial::NewIssue
Test Plan:
1) Apply this patch
2) prove t/db_dependent/Koha/Items.t
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This change adds a template include which can be used as a
WRAPPER for tool plugins, which makes it easy to pages in tool
templates without having to copy and maintain a lot of template
boilerplate.
Test plan:
0. Apply patch and koha-plack --restart kohadev
1. Upload koha-plugin-test-wrapper
2. Enable the plugin
3. Click "Actions" and click "Run tool"
4. Note how the plugin page looks like a perfect Koha Tools page
5. Note that the plugin only contains 6 lines of template code
to achieve this effect
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
At the moment 520 only displays in the OPAC. With this patch it
also displays in the staff interface detail page.
To test:
* Find a record with 520 or add some 520 entries to a record
Note: different ind. 1 values will result in different labels
* View the record in the staff interface and the OPAC
* Verify only the OPAC shows the 520 entries
* Apply patch
* Verify now the staff interface displays them as well
Signed-off-by: Phil Ringnalda <phil@chetcolibrary.org>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Updated patch for displaying $u as link.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Restored signoff line from Phil. Change only for $u.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch modifies the authority record editor so that form
validation errors are collected in a static "dialog" at the top of the
page instead of showing in a transient JavaScript alert.
The text of the message is roughly the same as it was in the alert, and
links have been added so that the user can click to jump directly to the
field referenced.
If the user scrolls down away from the static error message, a button
appears in the floating toolbar to jump back to the message.
- Go to Authorities and create a new authority record using a framework
which has multiple mandatory fields defined
(e.g. an unmodified default framework)
- Without entering anything in mandatory fields, click the "Save"
button.
- You should see a message box appear at the top of the page.
- It should list each missing mandatory subfield and tag, each with a
"Go to field" link next to it.
- Clicking the "Go to field" link should switch you to the correct tab
and scroll the mandatory field into view.
- When you have scrolled down far enough for the error messages to be
offscreen, an "Errors" button should appear in the floating toolbar.
Clicking it should scroll the box back into view.
- If you fix some but not all of the missing mandatory fields the
message should update with only the current issues.
- Confirm that the record saves when all issues are resolved.
Signed-off-by: Phil Ringnalda <phil@chetcolibrary.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Might just be a theoretical thing now, but safer to clone.
Test plan:
Run t/db_dependent/Koha/Biblio/Metadata.t
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Resolve:
WARN tidiness
The file is less tidy than before (bad/messy lines before: 21, now: 24)
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch uses the new record_strip_nonxml routine to attempt to display
the record when it contains invalid characters
Rather than silently strippg these, we warn in the logs, then add an 'about'
container to the response. It is displayed nicely in the web view or sent as "INVALID_METADATA" in
the xml response
The 'error' codes for OAI seem to be at the request level, and the offered codes don't have a match
for a bad record. Adding the about when we can recover seems the most generous response
To test:
Test plan, assumes using KTD default data - otherwise you need to find and import a record with encoding issues:
1 - Enable OAI-PMH system preference
2 - Browse to:
http://localhost:8080/cgi-bin/koha/oai.pl?verb=ListRecords&resumptionToken=marcxml/350////0/0/352
3 - 500 error:
Invalid data, cannot decode metadata object (biblio_metadata.id=368, biblionumber=369, format=marcxml, schema=MARC21, decoding_error=':8: parser error : PCDATA invalid Char value 31...
4 - Apply patch, restart all
5 - Reload the page
6 - It loads!
7 - Click 'Metadata' for record 369 - it succeeds!
8 - Check the logs - confirm you see a warning of the record problem
9 - Confirm 369 has an about section
10 - Check the individul 'GetRecord' response as well
http://localhost:8080/cgi-bin/koha/oai.pl?verb=GetRecord&metadataPrefix=oai_dc&identifier=KOHA-OAI-TEST:369
Signed-off-by: Sam Lau <samalau@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This adds a routine that can strip non xml characters form a record.
It is intended for cases where we do not wish to throw an exception,
but rather need to process a record to allow other work to continue
To test:
prove -v t/db_dependent/Koha/Biblio/Metadata.t
Signed-off-by: Sam Lau <samalau@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Bug 33030 implements a new helper subroutine to standardize processing of
Template Toolkit syntax outside slips and notices. We should use this
subroutine in the various parts of the SIP server code where we are
currently using Template::process directly.
Test Plan:
1) Apply this patch
2) prove -r t/db_dependent/SIP
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This is because no nav tabs are build in addbiblio.tt as BIG_LOOP has a
length(size) of 1
To test:
1) go to More>Cataloging
2) click +New record
3) Click Settings> Fast add framework
4) take a look on console
5) try selecting a different framework now, will have no effect
6) apply patch and redo steps 1 to 5
7) there should be no error in console and a change in settings works a
expected
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Bug 31162 moved the cataloguing tools to a new cataloguing module home
page. This prevents people without cataloguing permissions, but with
some tools permissions to access things like the labels creator tool.
I tracked all permissions on the cataloging-home.tt template, including
the Stock Rotation ones which I initially missed because I was focusing
on tools.
This patch makes the cataloging-home.pl page require either
'cataloguing' or any relevant 'tools' permission to allow access. the
page.
The staff interface main page and the top bar dropdown are updated using
the same logic to display the cataloguing module link.
For that purpose, I wrapped the permissions on a sub in `C4::Auth`.
To test:
1. Have a patron with only 'catalogue' and some of this permissions:
* inventory
* items_batchdel
* items_batchmod
* items_batchmod
* label_creator
* manage_staged_marc
* marc_modification_templates
* records_batchdel
* records_batchmod
* stage_marc_import
* upload_cover_images
* stockrotation => manage_rotas
2. Log in
=> FAIL: No link to the cataloguing module, neither in the dropdown
3. Apply this patch
4. Repeat 2
=> SUCCESS: You have the link!
5. Play with the different combinations and notice things are sound and
correct
6. Sign off :-D
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
