The change in MoveReserve from the previous patch begs for a test.
Here we add some to Reserves.t.
In all six tests we place a hold, move it and check the reserves again.
Depending on the status of ConfirmFutureHolds, and the reservedate the
hold should be moved or not.
Test plan:
Run the unit test.
Bonus: If you run Reserves.t by applying this patch but without the first
patch that changed MoveReserve, tests 60 and 61 should fail:
not ok 60 - MoveReserve filled future hold now
not ok 61 - MoveReserve filled future waiting hold now
This may further illustrate the need of the first patch.
Signed-off-by: Joonas Kylmälä <j.kylmala@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
At checkout a hold for the same borrower is considered to be filled.
It is consistent to do the same for holds of the same borrower within
[ConfirmFutureHolds] days (if non-zero).
This goal is achieved by adjusting the CheckReserves call within
MoveReserve, adding the lookahead parameter.
I used this occasion to revisit other calls of CheckReserves:
- transferbook: no need to add lookahead; a future hold should not block
a transfer;
- CanBookBeIssued: no lookahead; future hold does not block an issue;
- CanBookBeRenewed: idem.
- GetOtherReserves (only used in circ/returns): this call might be a
candidate for lookahead too, but I leave that for another report. It is
in the context of checkin and transfer, not checkout.
Test plan:
[1] Set ConfirmFutureHolds to zero days. (You may also need to enable
AllowHoldDateInFuture.)
[2] Place a hold with borrower A on biblio X for tomorrow. Also place a hold
with borrower B on X for today. (Use biblio level holds.)
[3] Check out item Y of X to borrower A. Ignore the warning for borrower B
and do not cancel the hold of B (so: confirm checkout).
Verify that X has still two holds.
[4] Check in Y (without confirming a hold).
[5] Enable ConfirmFutureHolds, say 2 days.
[6] Check out Y to A again. Ignore the warning for B (no cancel). Verify that
X now only has one hold for borrower B (the hold for A was filled).
Signed-off-by: Joonas Kylmälä <j.kylmala@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To test:
- prove t/db_dependent/Letters.t
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Currently it's not possible to include information about which
issue has arrived in the serial notification notice the patron
can subscribe to from the OPAC.
The patch makes the fields from the subscription and serial
table available to the notice template.
In order to be able to print information about the correct
issue, the GetAlert has been modified to expext the serialid
as externalid when the module is issue.
git grep SendAlerts (only call with 'issue' is in Serial.pm)
To test:
- Add a subscription, select a patron notification template
- Search for the record in the OPAC
- Go to the subscription tab - More details
- Subscribe to the notification
- Edit the notice template you selected for the subscription
- add fields from subscription
- add fields from serial (serial.serialseq has the issue
information)
- Receive an issue for the subscription
- Check that you have received the notification and that
all information has been printed correctly
NOTE: notice is sent directly, not through the message_queue
Followed test plan, works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
On creating an item type, if it already exists, it will replace the
existing one.
This patch prevent that and display a message to the interface.
Note: The fields are lost.
Test plan:
1/ Create an item type 'AAA', description 'AAA'
2/ Edit it, update the description with 'BBB'
3/ Create an item type 'AAA' with a description 'CCC' => you should get
a warning "already exists".
Works well, no errors
Signed-off-by: Amit Gupta <amit.gupta@informaticsglobal.com>
Signed-off-by: Joonas Kylmälä <j.kylmala@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Warning message is triggered.
Adding, editing and deleting item types still works.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The special regex chars are not escaped in C4::HTML5Media.
Test plan:
1/ Set 856$u=http://www.mrqe.com/lookup?talented+mr.+ripley
2/ Enable the pref HTML5Media
3/ Go on the detail page
It should not explode.
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Joonas Kylmälä <j.kylmala@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
On the edit items page, there is some weird JS code: if the user clicks
on the delete link and then cancel, the item is deleted anyway.
It's caused by the following JS code in browser.js
$('a[href*="biblionumber="]').click(function (ev) {
ev.preventDefault();
window.location = $(this).attr('href') + '&searchid=' + me.searchid;
});
Test plan:
- Do a search with multiple results
- Go to the detail page (make sure results browser shows up!)
- Use the "Edit items" link from the toolbar
- Delete an item (try both way)
- Choose "cancel"
- Delete an item (try both way) and confirm the deletion
You should see the browser after the deletion and the item should have
been deleted correctly.
- Edit an item (try both way)
You should see the browser (did not work before this patch)
Note: Before this patch, the 2 first columns didn't contain the
edit/delete item links, now it's only the 1st one.
Signed-off-by: Nick Clemens <nick@quecheelibrary.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Much better!
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The unit test is db dependent (as Jonathan correctly remarked),
since the sub checks a preference.
Test plan:
Run t/db_dependent/Biblio/TransformHtmlToXml.t
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The ind_tag of TransformHtmlToXml is unused.
Some calls to this function incorrectly revert indicator and ind_tag (which
is not a problem when both are empty..)
Patch of Srdjan Jankovic, amended and signed off by Marcel de Rooy.
The following calls are fixed:
call in acqui/addorder.pl: switched indicator with ind_tag
call in acqui/addorderiso2709.pl replaced too
acqui/finishreceive.pl replaced too
These calls are fine:
two calls in cataloguing/additem.pl are fine
call in serials/serials-edit.pl is fine
call in tools/batchMod.pl is fine
The folllow-up patch adds a simple unit test.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
With AcqCreateItem=='placing an order', tested if adding an order still
worked (covered both addorder.pl and addorderiso2709.pl).
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The pref are double encoded.
From bug 12411:
"This will fix the encoding issues existing in 3.14 and 3.16.
The issue still appear in master but is fixed by bug 11944."
They should not have been pushed together.
Test plan:
1) You need an accentuated language installed.
2) Go to NoLoginInstructions pref, and add some accentuated message like
"Hélo médames é mècieüx"
3) refresh opac home page, message should be gibberish
4) apply patch. Message should be ok now.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Works as expected.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Bug 10404 adds the use of String::Random to catalogue/search.pl but bug
11369 removes it without removing the import line.
Test plan:
git grep String::Random catalogue/search.pl
should not return anything
Signed-off-by: Joonas Kylmälä <j.kylmala@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
The script dies with
Can't use an undefined value as a HASH reference at tools/export.pl
line 149.
if it is called from the command line.
This is introduced by bug 13040.
The C4::Context->userenv is not defined in this case.
Test plan:
Execute the script using the command line.
With the patch applies you should not get the error.
Signed-off-by: Joonas Kylmälä <j.kylmala@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
A constraint is missing on the course_reserves.ci_id field.
This patch adds it and removes orphan rows.
Test plan:
0/ Don't apply the patch
1/ Login to Staff Site.
2/ Go to Course Reserves
3/ Create Course
4/ Add Reserve
5/ Go to item added (delete item/record)
6/ Refresh Course (see no items attached)
7/ Delete Course
8/ See course still listed in the courses (Not deleted)
9/ Apply the patch and execute the updatedatabase entry.
10/ Delete the Course
Note that the course has correctly been removed.
NOTE: Make sure to set the UseCourseReserves system preference to test.
Tested before (problem existed) and after (problem solved) update.
Dropped DB, web installed, and put in dummy data and retested.
Problem solved.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Bug 13970 removed some useful code to automatically set the guarantor
when creating a child.
But finally there is a better way to do the job, we just need to assume
that only children or professional can have a guarantor.
Test plan:
1/ Create an adult patron and add a child.
2/ The guarantor info should be retrieved and set on the child creation
page.
3/ Create an organization and add a child
4/ The guarantor info should be retrieved and set on the adult creation
page.
Signed-off-by: Liz Rea <liz@catalyst.net.nz>
This patch catches both cases, thanks Jonathan!
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
When moving from Moose to Moo we didn't address a minor syntax change
Moo introduces. This patch fixes that.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The reserves.constrainttype does not exist anymore, it has been removed
by bug 9809.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
AllowRenewalIfOtherItemsAvailable checks
C4::Reserves::IsAvailableForItemLevelRequest to see if the item is
holdable, which catches not for loan values less than 0 ( i.e. holdable,
but not circ-able ). However, since this feature is about
actually checking out items to patrons, we should not count *any* not
for loan items when deciding if the available items will satisfy all
current holds.
Test Plan:
1) Enable AllowRenewalIfOtherItemsAvailable
2) Create a record with two items
3) Check out one item to a patron
4) Ensure the item is renewable
5) Place a hold on the record
6) The item should now be non-renewable
7) Add a second item to the record, but with a not for loan value < 0
8) Note the checkout is still renewable
9) Apply this patch
10) Note the checkout is now non-renewable
Works ok.
Signed-off-by: Amit Gupta <amit.gupta@informaticsglobal.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Adds a new line for the holiday's description instead of the string
\r\n.
Test plan:
1. In tools -> Calendar look at some holiday's description
(Do a new holiday with description of multiple lines if
there is not already)
2. Notice that there is characters \r\n if someone has put
a newline in the holiday's description
3. Apply patch
4. See that the new lines show there now nicely
Sponsored-by: Vaara-kirjastot
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Amended slightly: no need to replace title.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds the 'Htmlarea' type to the dropdown box
introduced by bug 14268, commit 6e3bcc38.
Sponsored-By: Halmstad County Library
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds a system preference "UseWYSIWYGinSystemPreferences" to the Staff Client tab.
By default, it is off, which means that the TinyMCE WYSIWYG editor won't be shown for system
preferences with a type of "htmlarea".
However, when it's on, it will show the editor for "Local Use" preferences with a "htmlarea"
type, and for other system preferences in the "Opac", "Circulation", and "Staff Client" tabs,
which I have re-assigned. (Basically, I grepped for HTML and changed the type for all
the system preferences I found except for "IntranetNav", "OpacCustomSearch", and "OPACSearchForTitleIn",
as a WYSIWYG editor would potentially break the output for these system preferences or
add no value to them...)
_TEST PLAN_
0) Run `perl installer/data/mysql/updatedatabase.pl` after setting your environmental variables
1) Check the Opac tab to make sure that the WYSIWYG is nowhere to be seen
2) Change the "UseWYSIWYGinSystemPreferences" preference in "Staff Client" to "Show"
3) Refresh the Opac tab and notice that many system preferences now have a WYSIWYG editor
4) Try typing some text into these fields
5) Note that it gets marked as "modified"
6) Save the preference, and refresh the page
7) Note that the content has been saved
8) Take a look at how it's rendered on the actual webpage!
Signed-off-by: Martin Persson <xarragon@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds the TinyMCE license info to about.pl
Signed-off-by: Martin Persson <xarragon@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds the ability to use a WYSIWYG editor for system preferences.
The key files that I touch are:
1) admin/systempreferences.pl
2) koha-tmpl/intranet-tmpl/prog/en/modules/admin/preferences.tt
3) koha-tmpl/intranet-tmpl/prog/en/modules/admin/systempreferences.tt
I also add:
4) koha-tmpl/intranet-tmpl/prog/en/includes/wysiwyg-systempreferences.inc
and
5) koha-tmpl/intranet-tmpl/lib/tiny_mce/plugins/advimage
This plugin is part of the TinyMCE distribution. It used to be in Koha, but
then someone removed it. It's useful for preferences like "opacheader" though.
*If you're using anything except IE, this should work super well. If
you're using IE, it'll probably only work for keyboard input and dragging
text within the editor box but not from outside of it. IE has worse
security, so you can probably paste using the context menu paste.
*While I think a WYSIWYG editor can be useful, there might be times
where the content is displayed differently than it is in the editor
because of higher level CSS and Javascript.
Signed-off-by: Martin Persson <xarragon@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The previous patch wants to select the barcode option when the user is
on the item search for label, in all cases.
So even if 'title' is selected, a search done, and there is no result,
the barcode index is selected anyway.
In this case, the title option should be kept.
Test plan:
Confirm that the barcode option is the default choice, but other values
are kept if the search does not return any result.
Followed test plan, behaves as expected. Tested with all choices.
Signed-off-by: Marc Veron <veron@veron.ch>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Test case:
* Go to "Tools -> Label creator -> Manage batches"
* Click on the "New batch" button
* Click on the "Add item(s)" button
* A search window should open. The "Barcode" value should be selected in the the selectbox.
Followed test case. Patch behaves as expected.
Signed-off-by: Marc Veron <veron@veron.ch>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
By default this syspref is "Do" to keep the previous behaviour.
Test plan :
1/ create 2 categories (A & B). B with enrolment fee
2/ create a patron in category A
3/ change the patron category from A to B
4/ check that the patron has an enrolment fee to pay
Apply the patch
1/ create a new patron in category A
2/ change the patron category from A to B.
3/ check that the patron has an enrolment fee to pay
4/ change the system preference 'FeeOnChangePatronCategory' to 'Don't';
5/ create a new patron in category A
6/ change the patron category from A to B
7/ check that the patron has no enrolment fee to pay
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Test plan:
1) Apply this patch
2) Ensure you are using the default XSLT setting for the staff and opac search results and record details
3) Find or create a record with MARC tags 100,110,111
4) Perform an opac search that would show the record in the search results.
5) Click title to review record.
6) Note the fields updates 100,110,111 to show subfields a,b,c,d,q and t.Multiple fields are separated by span class=separator |. Includes 100$j and handles multiple relator terms/codes.
7) Repeat steps 4 - 6 for the staff interface
Signed-off-by: Nick Clemens <nick@quecheelibrary.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The cn_browser.pl cataloguing plugin only searches for used callnumbers
on the bibliographic database. There is no need for this plugin to
require special permissions besides access to the catalog.
To test:
- Link the cb_browser.pl cataloguing plugin to 952$o in your favourite cataloguing framework
- Login with a superlibrarian user
- Try the plugin
=> SUCCESS: you can use it
- Login with a user that has the full 'tools' permission
- Try the plugin
=> SUCCSES: you can use it
- Login with a user that doesn't have full 'tools' permission
but has the normal catalogue and cataloguing permissions.
- Try the plugin
=> FAIL: you are requested to login with a different user
- Apply the patch
- Retry
=> SUCCESS: you can use it
- Sign off :-D
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To test:
1) Go to any page on the staff client and make sure you are not logged in (ie an error page, cgi-bin/koha/errors/400.pl)
2) Try click on 'You are not logged in |'
3) Notice it is not really a link and doesn't take you anywhere
4) Apply patch
5) Refresh page
6) Click on what now says 'Log in |'
7) Confirm that you are redirected to the intranet log in page
Signed-off-by: Aleisha <aleishaamohia@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To test:
1) Create a new record in Cataloguing
2) When done, instead of adding an item to the record, click on the Holds tab in the left nav
3) Notice warns
4) Apply patch and refresh page
5) Click on Holds tab again
6) Notice warns are gone and page still works
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Warns disappear; note that the display of the error message is still ugly.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Add a script sitemap.pl to process all biblio records from a Koha
instance and generate Sitemap files complying with this protocol as
described on http://sitemaps.org. The goal of this script is to be able
to provide to search engines direct access to biblio records. It avoid
leaving search engine browsing Koha OPAC and so generating a lot of
traffic, and workload, for a bad result.
Thanks Magnus for testing, and helping to improve the script design.
[2015.04.16] Switch from Moose to Moo.
[2015.08.20] Add complete (more) UT.
Signed-off-by: Magnus Enger <magnus@enger.priv.no>
All options to the script work as expected and the output looks
good. Nice enhancement!
Signed-off-by: Frederic Demians <f.demians@tamil.fr>
I signed-of my own patch after fixing various QA errors.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Amended patch: replace tabs with spaces.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Some librarians have expressed that it would be helpful if the holds tab
displayed the count of holds for a record.
Test Plan:
1) Apply this patch
2) Note the Holds tab for a record now displays the number of holds for that record
Signed-off-by: Jason Robb <jrobb@sekls.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jason Robb <jrobb@sekls.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch introduces tab-completion in bash to the koha-mysql
command. It completes using valid instance names. It stops completing
once an instance name is chosen (i.e. it respects the fact that
koha-mysql accepts only one instance name as parameter).
To test:
- Have a packages install (kohadevbox works)
- Run:
$ . debian/koha-common.bash-completion
- Type
koha-mysql <tab>
=> SUCCESS: You are prompted valid instance names for completion.
- Sign off :-D
Signed-off-by: Nick Clemens <nick@quecheelibrary.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch fixes the koha-restart-zebra and koha-stop-zebra scripts
by adding pidfiles folder to the test is_zebra_running.
It also adds pidfiles to the test is_indexer_running so that
koha-rebuild-zebra will work properly.
Test plan:
1) check if zebrasrv is running, get pid of zebrasrv
ps ax | grep zebrasrv
2) In my case, there was also a warning on the about.pl page on a fresh
install: Error message from Zebra: 1011 (bad credentials)
3) try to restart zebra
koha-restart-zebra instancename
You will get a msg :
Zebra does not appear to have been running for instancename
Starting Zebra server for instancename
4) check again if zebrasrv is running
ps ax | grep zebrasrv
and see that pid has not changed, thus it is not restarted
5) Apply patch
6) repeat 4) and watch now how pid has changed
If there was a warning on about.pl it should now be gone
Signed-off-by: Mason James <mtj@kohaaloha.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Good catch Benjamin! It works as expected with the patch.
The crux of the issue is that if you are using item level itemtypes, but
are allowing biblio levels holds, those holds do not have items.
So, in CanItemBeReserved, when Koha counts the number of holds to
compare against the given rule, it will always give 0 ( except of course
for found holds, and the occasional item-level hold ).
So the query is saying "link each of these reserves to the reserved
item, and count the number of reserves this patron where the itemtype is
DVD". However, since these are all record level reserves, there are no
items to link to, and so when it looks for all reserves this and item
whose itemtype is DVD, it finds zero reserves!
This patch solves the problem by looking first at the item level
itemtype, and if it does not exist, then it looks at the record
level itemtype. For installations using record level itemtypes, the
behavior remains unchanged.
Test plan:
1) Enable item level itemtypes
2) Create two records with one item each of a given itemtype
3) Create a single issuing rule and limit the holds allowed for that
itemtype to 1
4) Place a record level hold on your first record
5) Attempt to place a record level hold for the same patron on your
second record. You should not be able to but you can!
6) Apply this patch
7) Repeat step 5, note you can no longer place the hold!
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>