After receiving an error while attempt a simple inventory run,
Two lines were changed from:
...$_->...
to
...$item->...
since the loop variable is $item. And $_ is not set to the
expected hash reference, when there is a loop variable.
This also helps explain the "Why are there blank dates on my
last seen field?" problem that has been mentioned by users.
TEST PLAN
---------
1) Apply this patch after a reset to master.
2) Log in to staff client
3) Add one item via z39.50, setting barcode to a known value (BARCODE1)
4) Wait for the reindex
5) Home -> Tools -> Inventory/Stocktaking
6) Browse for a file with the barcode in it
7) Set the library dropdown to the library branch of the added item.
8) Check 'Compare barcodes list to results:'
9) Click 'Submit'
-- This should not die under plack.
This should not generate blank last seen dates.
The last seen dates should be as expected.
10) run koha qa test tools
11) Confirm the two change point correspond to the two change points
in the patch which shall not be pushed to master.
The test result comply with expected outcome outlined in test plan.
Signed-off-by: Indranil Das Gupta (L2C2 Technologies) <indradg@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
The call to RmPatronImage is still passing cardnumber as its parameter
instead of borrowernumber.
Test Plan:
1) Upload a patron image
2) Ensure the card number is not the same as the borrower number
3) Attempt to delete patron image
-- Image will remain
4) Apply this patch
5) Attempt to delete patron image
-- Image will be removed
6) run koha qa test tools
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The current code uses
$barcode = <fh>;
logic. This reads until \n, as far as I can tell.
EOL is indicated by \n, \r, and \r\n depending on OS and software.
So, to this end, rather than File::Slurp (which is a potential
memory hog, which is already an issue with no filters), a loop
to pre-read the barcodes was written.
This loop includes:
$barcode =~ s/\r/\n/g;
$barcode =~ s/\n\n/\n/g;
my @data = split(/\n/, $barcode);
push @uploadedbarcodes,@data;
So, that means that lines ending in \n would have it stripped
and pushed into the uploaded barcodes array.
Lines ending in \r would likely be read as one giant block,
have everything converted to single \n's and then using a split,
the set of barcodes are pushed into the uploaded barcodes array.
Lines ending in \r\n would get that stripped and pushed into the
uploaded barcodes array.
It is then the uploaded barcodes array that is looped over for
validating the barcodes.
TEST PLAN
---------
1) Back up your database
2) Download the three sample files (or create your own)
3) Log in to staff client
4) Create a branch with no inventory.
5) Home -> Tools -> Inventory/Stocktaking
6) Browse for your '\r' test file.
7) Limit to just that branch
8) Click 'Submit'
-- Confirm expected errors
9) Repeat steps 5-8 with the '\n' test file.
10) Repeat steps 5-8 with the '\r\n' test file.
-- one of these repetitions should have problems.
11) Apply patch
12) Repeat steps 5-8 for each of the 3 test files.
-- there should be no issues.
13) run koha qa test tools.
Note: This is a tweak based on Jonathan Druart's comment #16
I have reset it to needs sign off again.
Followed test plan. Works as expected. qa OK.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Test plan:
1) Go to any detail page in staff
2) Click on the modification log tab
3) Verify, that the object is prefilled with the records biblionumber
and you can also see it as parameter in the url
4) Click a second time on modification log to reset your search
Before this patch, the object parameter was empty.
It now contains the value of the biblionumber.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Work as described, no koha-qa errors
http://bugs.koha-community.org/show_bug.cgi?id=10335
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
If an error occurs in patron batch modification, a message similar to the following is displayed:
Can not update patron with borrowernumber 7055
It would be useful to have the cardnumber as well.
This patch adds the card number to the lists of errors.
It is not easy to trigger an error (see comments).
For testing, I tweaked the sub ModMember in C4/Members.pm to always return false.
TEST PLAN
---------
1) Log in as a superlibrarian and create a test user
2) Change the cardnumber to a number differing from the
borrower number.
3) Home -> Tools -> Batch patron modification
4) Type in the cardnumber of that test user
5) Check the Library checkbox.
6) Click Save
-- nice error, but it is borrower number instead of
the card number which was entered.
7) Apply the patch
8) Repeat steps 3-6
-- nice error, but it is now more informative.
9) run koha qa test tools.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
On importing authority records, the items related string should not be
displayed.
Test plan:
1/ Import an authority record
2/ Confirm the item related string are not displayed.
3/ Before this script, the record_type param was lost just after
importing the records. Now you should see
"Processing authority records" of "Processing bibliographic records" in
the "MARC staging results"
4/ Revert the import and check there is not item related strings.
No behavior should exist on importing bibliographic records.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Bug 12412 introduced a way to use plugins to generate MARC records
out of any arbitrary format. But failed to properly check for
a valid configuration (plugins_enabled entry on koha-conf.xml, and
even the UseKohaPlugins syspref).
This patch makes tools/stage-marc-import.pl test for the required
configuration before attempting to create the Koha::Plugins object.
To test:
1/ Make sure you don't have a plugins_enabled entry on your koha-conf.xml file
2/ On master, browse to tools/stage-marc-import.pl
=> FAIL: You get a nasty "Can't call method "GetPlugins"..." error
3/ Apply the patch and reload
=> SUCCESS: Stage MARC for import page renders correctly
Repeat with plugins_enabled == 0 and == 1. Also UseKohaPlugins enabled/disabled.
It should work as expected.
Regards
Tomas
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Works as described, no koha-qa errors
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch is a rough start. I believe it runs exponentially
faster, but its equality to the previous version needs to be
tested before I clean it up to acceptable standards.
Nested hashes of hashes was being a debugging nightmare.
Moved the SQL select to C4::Koha.
Changed the GetItemsForInventory to have a hashref parameter.
Added interface, in case there is a need for 'opac' vs. 'staff'.
Added t/db_dependent/Items/GetItemsForInventory.t
Added t/db_dependent/Koha/GetKohaAuthorisedValuesMapping.t
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Many libraries would like to be able to import various types of files as
MARC records ( citations, csv files, etc ). We can add a new function to
the plugins system to allow that kind of behavior at a very custom
level.
Test Plan:
1) Ensure you have plugins enabled and configured correctly
2) Installed the attached version 2.00 of the Kitchen Sink plugin
3) Download the attached text file
4) Browse to "Stage MARC records for import"
5) Select the downloaded text file for staging
6) After uploading, you should see a new area "Transform file to MARC:",
select "Example Kitchen-Sink Plugin" from the pulldown menu
7) Click 'Stage for import"
8) Click 'Manage staged records"
9) You should now see two new MARC records!
Signed-off-by: Aleisha <aleishaamohia@hotmail.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described - interesting new feature.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch displays the address information in the left column of the patron's pages using the new system preference.
The address is formatted in member-display-address-style-us.inc and member-display-address-style-de.inc
To test:
- Apply patch on top of 1st and 2nd patch
- Select 'German style' in system preference 'addressformat' in I18N/L10N
- Verify that the address information displays properly in the left column of all patron's pages.
- Verify that the address displays properly in the main area of moremember.pl as well (Note: In right column, Alternate address /contact are not yet touched))
- Switch system preference to US style, repeat checks
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
AMending without changes to put this patch at the end of the patch list / Marc
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Courret <scourret@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Bug 11395 uses the session to store the report sent to the interface
(update on biblio XX OK, etc.).
If the session is stored in mysql, the max size of the
sessions.a_session will be reached easily (TEXT field).
To reproduce:
0/ Set SessionStorage to 'mysql'
1/ Create a file with 500 biblionumbers:
mysql -e "select biblionumber from biblio limit 500;" | tail -n 500 > /tmp/biblionumbers.txt
2/ Define a marc modification template (something like "delete field 99$9" is nice)
3/ Load the /tmp/biblionumbers.txt in the batch biblio modification tool
4/ Repeat 3
You will get:
Syck parser (line 1534, column 6): syntax error at
/usr/lib/i386-linux-gnu/perl5/5.20/YAML/Syck.pm line 75.
None Koha page is reachable.
It comes from get_template_and_user > checkauth > get_session >
l.1595 $session = new CGI::Session("driver:MySQL;serializer:yaml;id:md5", $sessionID, {Handle=>$dbh});
5/ Get your sessionID contained in your CGISESSID cookie
Have a look at the value a_session in the sessions table:
mysql> select a_session from sessions where id="YOUR_SESSIONID";
You should see that the yaml is not correctly ended.
The size of the DB field has been reached and the yaml is truncated.
Test plan:
0/ Delete your CGISESSID cookie
1/ Try to reproduce the previous issue
2/ After the second batch, have a look at the sessions table and confirm
that only one job_$JOB_ID exist in the yaml
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
NOTE: Nicely clears batch job session information.
(2) is incorrect. This cleans up after a full run.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Chris Nighswonger <cnighswonger@foundations.edu>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
http://bugs.koha-community.org/show_bug.cgi?id=9987
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch implements the use of Koha::FrameworkPlugin in Cataloguing,
Authorities, Acquisition, Serials and Tools.
The main change is architectural: see the commit message of the previous
patch. No changes in behavior are expected, but the support of new events
may provide additional functionality in the future. Some small bugs are
resolved along the way.
The change primarily focuses on the MARC and items editor in Cataloguing.
But the MARC editor for Authorities and the item editor in Acquisition,
Serials and Tools are touched too. This commit message gives some comments
per module.
NOTE FOR CATALOGUING:
A new plugin without popup (or other click event code) now shows the title
No popup when hovering over the tag editor image. The image alerts the
user on a plugin, the title tells about its status. The noclick property
allows for further style modifications in the template. Note that a
follow-up patch will clean up the old style plugins too with the same
effect.
Some additional code in cataloging.js makes it possible to clone subfields
with plugins (although only theoretically useful). The clones use the
same javascript functions but event.data contains an updated id.
This effectively resolves bug 13306. Note that if old plugins do not use
the javascript parameter for the id but the perl variable, cloning does
still operate on the wrong field (with and without this patch set).
In the absence of report 12176 in master, it is not yet necessary to modify
additem.tt. When it gets pushed, it should be an easy rebase.
New style item plugins will no longer need an extra parameter. (The code in
the FrameworkPlugin object actually takes care of that.)
NOTE FOR AUTHORITIES:
This patch also adds class name tag_editor to the buttonDot anchors. This
effectively makes the same tag editor image appear as in Cataloguing.
Futhermore it removes the button from the tab sequence if there is no click
event (really effective after conversion to the new style, since the old
style plugins contain empty onclicks and launchers).
Both small adjustments increase consistency between auth and bib edits.
NOTE FOR ACQUISITION:
In Acquisition two scripts use an item editor, but in a different way.
The scripts addorderiso2709 and neworderempty both rely on the routine
PrepareItemrecordDisplay in C4::Items, but neworderempty creates item
blocks dynamically via an ajax call to services/itemrecorddisplay.pl.
In order to make the dynamic item blocks work with plugins, some code
changes were needed in additem.js. (Normally the event binding is done
at document ready time; now it must be done later.)
At this moment the routine in Items.pm contains the html tags, and this
makes changes to the following templates not necessary for now:
* acqui/addorderiso2709.tt
* services/itemrecorddisplay.tt
Report 13397 has been opened to address moving the html to the templates.
NOTE FOR SERIALS:
Script serial-edit relies also on C4::Items (just as in Acquisition).
This makes changes to serials/serials-edit.tt not necessary for now.
NOTE FOR TOOLS:
The current code in tools/batchMod.pl allows the use of plugins for batch
modification of items. This patch just converts that code to use the new
object. Most item plugins however may not be very useful for operating on
multiple items at once.
PERFORMANCE:
I have benchmarked build_tabs in addbiblio to see how especially the
additional processing of the javascript in the FrameworkPlugin object
would impact performance. Testing default MARC21 framework with 8 plugins
gave the following figures:
- Old situation: 851 ms
- New situation: 942 ms (+10,7%)
- New situation after plugin cleanup: 881 ms (+3,4%)
Note also that adding lines for event binding is compensated by removing
lines for unused events. Page load should essentially be the same.
TEST PLAN:
Suggestion: If you also apply the next patch with the EXAMPLE plugin, you
can test with a rather harmless plugin (with popup) on various places :)
But your test should also include old style plugins, with[out] popups.
If you want to test a new plugin without popup, rename/remove Click$id
in the javascript code of the $builder definition (temporarily).
[1] Test Cataloguing:
- Add/Edit biblio. Try plugins with and without popup.
- Add/Edit items. (EXAMPLE can be used as an item plugin with popup.)
- Clone a subfield with plugin (use EXAMPLE): Verify that the plugin
works on both original and clone with the respective field values.
Is the value put back in the right field too?
[2] Test Authorities:
Edit an authority record. Try plugins with an without popup.
[3] Test Acquisition:
Set system preference AcqCreateItem to "placing an order".
Check the item editor in the following two places:
a- addorderiso2709: Open a basket, add an order from a staged file.
Select a file, click Add orders, and go to tab Item information.
b- neworderempty: Open a basket, add an order from a new empty record.
[4] Test Serials:
Check the item editor on serials-edit. Go to subscription detail.
Click Receive. Choose "Click to add item". (Note that this subscription
should create an item record when receiving this serial.)
[5] Test Tools:
Check the item editor for batch item modification. Enter a few valid
barcodes and press Continue to reach the item editor.
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
To reproduce:
Go to Home > Tools > Logs
Check intranet-error.log.
You will find a line similar to:
viewlog.pl: Use of uninitialized value $src in string eq at (...)/tools/viewlog.pl line 70., referer: http://(...)/cgi-bin/koha/tools/tools-home.pl
To test:
Apply patch.
Verify that no more warnings appear in intranet-error.log
Verify that the log viewer behaves as before.
Signed-off-by: Andreas Hedström Mace <andreas.hedstrom.mace@sub.su.se>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patchs adds the item information in the diff view.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
If you come from the biblio detail page and click on "modification log",
you should get the circ menu, not the tools menu.
Test plan:
1/ Go on a biblio detail page
2/ Click on the "modification log" tab
3/ You should get the modification log page with the circ menu.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The modules and actions selected by the user are now selected when a
log search is done.
Note that this patch also add the multiple attribute to the actions
select in order to add the ability to select several actions.
The code to do that already existed.
Test plan:
1/ Go on the log viewer tool (tools/viewlog.pl)
2/ Launch a search with modules and actions selected.
3/ Confirm that the values you have selected is still selected after the
search.
Patch works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
It appears that bug 8970 has introduced a bug where a MARC file uploaded
for staging fails to import *unless* a matching rule is selected.
Test Plan:
1) Apply this patch
2) Stage and import a MARC record *without* choosing a matching rule
3) Note the staging works as expected
Signed-off-by: Cindy Ames <cmurdock@ccfls.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch is the main patch.
This feature adds the ability to link patrons to an order.
On that way, they will be notified when the order is completely
received.
Test plan:
1/ Execute the updatedb entry and verify you have a new notification template in your table (tools/letter.pl).
code: ACQ_NOTIF_ON_RECEIV, module: acquisition
2/ You can edit it if you want
3/ Create a basket and create an order with 1 or more items
4/ Link 1+ patrons to this order
5/ Close the basket and receive the order
6/ When you have received all items for this order, all patrons attached
will be notified. Check the message_queue table to check if the letters
have correctly been added to the queue.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
"item not scanned": when calling GetItemsForInventory, datelastseen should
be used when "compare barcodes list to result" is checked.
Otherwise, when loading multiple barcodes files for the same inventory, many
items will be marked as "item not scanned" when loading the last barcode file
("compare barcodes list to result" checked) even though they were scanned.
"wrong place": when searching for wrongly placed items, we should only check
for the location (callnumbers, location and branch). To fix this, A new call
to GetItemsForInventory has been made with location filters only.
Otherwise, any item with a different itemtype for instance will be marked as
wrong place even if the location is correct.
Test plan:
"item not scanned" status:
1) Split a barcode file in two.
2) Load the first barcode file without checking "compare barcodes list to result".
3) Load the second barcode file with "compare barcodes list to result" checked.
4) Check in the csv report that you have a lot of scanned items with the "item
not scanned" status.
Then apply the patch, do the same, and check that the false "item not scanned"
statuses are gone.
"wrong place" status:
1) Load a barcode file with barcode matching an item that has a correct
location, but a different itemtype than what you're looking for.
2) Check in the results that this item will be marked as "change item status"
and "wrong place".
Then apply the patch, do the same, and check that the only status for this item is "change item status", which is correct.
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch fixes the following issue:
If the user comes from a basket, the list view is displayed but there is
no way to select the modification template.
Now the template can be chosen on the list view. This way, the user is
able to change the modifications to apply and see the previewed records.
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch offers a new tool to modify records in a batch.
This feature adds:
- a new pl/tt files tools/batch_record_modification
- a new permission: tools > records_batchmod
Test plan for biblios:
0/ Create a new marc modification template with some actions.
1/ Generate a list of biblionumbers you want to modify.
There are two ways to generate a list of biblionumbers:
- using the basket: do a search, add some biblio to your basket, open
the basket and click on the "Action" button > "Modify"
- generating a list from a report
2/ On the "Batch record modification" tool verify:
- information is correct.
- the preview link show you the needed record.
3/ After clicking on the "Modify selected recors" button, verify
the records have been modified as you wanted.
Test plan for authority:
0/ Create a new marc modification template with some actions.
1/ Generate a list of authid using a report:
2/ On the "Batch record modification" tool verify:
- authorities are display with the summary.
- the preview link show you the needed record.
3/ After clicking on the "Modify selected recors" button, verify
the records have been modified as you wanted.
Catch of errors:
if an error occurs during the modification process, the tool
displays an error message.
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
The a patron's userid should be a matchpoint in the same manner as
cardnumber. Though not enforced as a unique key by the database yet
( pending bug 1861 ), this field is effectively unique as uniqueness
is enforced by Koha itself.
Test Plan:
1) Apply this patch
2) Browse to tools/import_borrowers.pl
3) Download the starter CSV file
4) Edit the csv file to include 1 or more patrons
* Make sure to leave the borrowernumber field empty
* Make sure the userid field matches the patrons you wish to overwrite
5) From import_borrowers.pl, upload your file
* Set "Field to use for record matching" to "Username"
* Set "If matching record is already in the borrowers table" to "Overwrite the existing one with this"
6) Click "Import"
7) Verify the patrons in your file have been updated in Koha
Signed-off-by: Frederic Demians <f.demians@tamil.fr>
Do exactly what's announced. This may help.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
To reproduce:
1/ Go on tools/export.pl
2/ Export some records and specify you don't want the fields 245 (the
whole field, do not specify a subfield).
3/ Export, BOOM
Software error:
Arguments must be MARC::Field object at /home/koha/src/tools/export.pl line 400.
Test plan:
Apply the patch and confirm the fields 245 are not exported and the
export works as expected.
Signed-off-by: Robin Sheat <robin@catalyst.net.nz>
Export fails to asplode with this patch
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This allows the exporter (Tools -> Export) to have any combination of
branches selected, rather than it being all or only one.
Test Plan:
* Apply the patch
* Go to the exporter, see that instead of a dropdown you now have an
elegently laid out grid of branches you can select from
* Select some branches, run the export
* Note that only records with items in the selected branches are
returned.
* Repeat this with the item related options (as that code was refactored
slightly) and make sure everything is sane.
Sponsored-By: South Taranaki District Libraries
Signed-off-by: Thomas <tomsStudy@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Prior to perl 5.12 keys can only operate on a hash. So although
$data[0] ( thats an abysmal variable name! ) will contain a hash ref
the perl compiler cannot deduce that from the context and gives
a syntax error. Add the hash sigil to make the context explicit and
the compiler can generate the correct code.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch could have only been
- name => $values[0]->{name},
+ name => $letter->{name},
Other changes are just indentation and variable names (send an hashref
$letter to the template and use the Branches TT plugin to display the
branch name)
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
C4::Letters::getletter does not set mtt in value ( i.e. { email => "my
email notice} ) at the contrary of the get_letter routine defined in
tools/letters.pl.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch fixes a major issue introduced by the
commit 5c4fdcf Bug 11742: A letter code should be unique.
The interface should let the possibility to create a default template
letter and some specific ones, with the same letter code (letter.code).
The patches submitted on bug 11742 tried to fix an issue based on a
(very bad) assumption: letter.code should be considered as a primary key and
should be uniq.
This patch reintroduces this behavior.
Note that the interface will block a letter code used in different
module (this is consistent not to have the same letter code used for different
needs).
This patch is absolutely not perfect, it just tries to change as less
change as possible and to use new tested subroutines.
Test plan:
1/ Verify that the problem raised on bug 11742 does not appears anymore.
2/ Verify there are no regression on adding, editing, copying, deleting
letters.
3/ Verify you are allowed to create a default letter template with a letter
code and to reuse for a specific letter (i.e. for a given library).
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
In inventory results, CSV or screen, the item withdrawn information is missing.
This information can be usefull to understand why an item was not scanned.
Test plan :
- Check you have in default framework an item subfield mapped with items.withdrawn
- Create a biblio with default framework
- Create an item with barcode='000AAA1', callnumber='ZZZAAA1' and withdrawn=0
- Create an item with barcode='000AAA2', callnumber='ZZZAAA2' and withdrawn=1
- Go to inventory tool : /cgi-bin/koha/tools/inventory.pl
- Enter item callnumber between 'ZZZ' and 'ZZZZ'
- Submit
=> You see a column 'Withdrawn' with withdrawn value
- Go to inventory tool : /cgi-bin/koha/tools/inventory.pl
- Enter item callnumber between 'ZZZ' and 'ZZZZ'
- Check 'Export to CSV file'
- Submit
- Open exported file
=> You see a column 'Withdrawn' with withdrawn value
Signed-off-by: Nick Clemens <nick@quecheelibrary.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
In the template of the export tools, the value 'marc' is set for
the 'format' variable.
It should be 'iso2709'.
There was a mess in the tools/export.pl script.
2 variables did the same thing: $format and $output_format
This patch fixes that replacing $format with $output_format
Test plan:
Try to export biblio in iso2709 and csv using the export tools and from
the checkout list.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Before applying the patch, attemping an MARC export from tools/export.pl
resulted in an error. After the patch the export works correctly.
Exports from the checkouts page also work correctly.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes tests and QA script. Also tested authority export.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Test:
1. Edit record, add 100.000 chars text to 500a
2. xml export produce the record,
3. mrc export do not produce the record, warning on log export.pl:
Record length of 111000 is larger than the MARC spec allows (99999
bytes). at /usr/share/perl5/MARC/File/USMARC.pm line 314. record
(number 139489) is invalid and therefore not exported because its
reopening generates warnings above at...
Signed-off-by: Frederic Demians <f.demians@tamil.fr>
I confirm that exporting biblio records larger than 10000 characters in
ISO2709 produces invalid files. After applying this patch, the culprit
record (too large, but also other inconsistencies preventing record
parsing with MARC::File::USMARC) is not exported anymore. A warning is
produced in Koha Apache log file. Warnings to the user on WUI would be
better, but it isn't the case yet, so it isn't a regression.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
I agree that a visible warning/result message in the staff interface
would be nice, but this works as described.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
If the sysprefs are empty, we assume that the librarian can edit all
subfields, even if s/he has the restricted permission.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
To know if the user is a superlibrarian, we have to call
C4::Context->IsSuperLibrarian
Signed-off-by: Koha Team AMU <koha.aixmarseille@gmail.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Two permission names have been changed since the first patch.
Signed-off-by: Koha Team AMU <koha.aixmarseille@gmail.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The both syspref names have been changed since the first patch.
Signed-off-by: Koha Team AMU <koha.aixmarseille@gmail.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch adds the following permissions:
- editcatalogue.limited_item_edition: Limit item modification to barcode, status and note
- editcatalogue.delete_all_items: Delete all items at once
- tools.items_limited_batchmod: Limit batch item modification to item status
The SubfieldsToAllowForLimitedEdition syspref is used to define which subfields can be edited
when the editcatalogue.limited_item_edition permission is enabled.
In the same way, the SubfieldsToAllowForLimitedBatchmod is used to define which subfields
can be edited when the tools.items_limited_batchmod permission is enabled.
Signed-off-by: Koha Team AMU <koha.aixmarseille@gmail.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This follow-up makes several changes to language and markup with one
change in behavior:
- Updated permission description to avoid the use of the term "biblio"
- Updated batch delete template to avoid the use of the term
"biblio" and to improve clarity.
- Replaced instances of terms "issue" and "reserve" with "checkout" and
"hold" respectively.
- On bibliographic record batch delete, wrap biblionumber in <label>.
- On bibliographic record batch delete, show subtitle via Keywords to
MARC mapping.
- On bibliographic record batch delete, respect BiblioDefaultView system
preference.
- In the staff client cart, move batch delete link from "Action" menu
to text link below (alongside "add to list" and "place hold"). The
buttons are actions which affect the whole Cart. The links are actions
which can be applied to selected items. I think this change makes it
more consistent with the kind of operation being performed.
To test:
- Submit a batch of bibliographic records and confirm that the
list of titles shows subtitle data as defined in Keywords to MARC
mapping. Confirm also that the title links respect your
BiblioDefaultView system preference.
- Perform a catalog search, select several titles, and add them to the
Cart. Open the Cart and test the "Batch delete" link with and without
titles selected. Test as a user who lacks batch biblio delete
permission and confirm that the link does not appear.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Work as described, no koha-qa errors
I love the rewording, we always translated 'biblio' as 'bibliographic record',
it makes a lot of sense.
Tested using direct input of biblionumber or cart, subtitle display shows
correctly, link respect preference, user without permission cant acces the
tool or links.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
- Fixes the permission on the tools page
- Fixes some capitalization
- Changes 'Reserves' to 'Holds'
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch offers a new tool for deleting records.
Biblios and authorities will can to be deleted with a simple list of
biblionumber or authid.
This feature adds:
- a new pl/tt files tools/batch_delete_records
- a new permission: tools > records_batchdel
Test plan for biblios:
1/ There are two ways to generate a list of biblionumbers:
- using the basket: do a search, add some biblio to your basket, open
the basket and click on the "Action" button > "Delete"
- generating a list from a report
2/ On the "Batch record deletion" tool verify:
- biblios with issues cannot be deleted (checkbox disabled and line in
red).
- information is correct.
- sort functions work on each columns.
- the items, reserves and issues values are correct.
3/ After clicking on the "Delete selected recors" button, verify:
- reserves, items and biblio have successful been deleted.
- if an error occurs, the tool display an error message.
Test plan for authority:
1/ Generate a list of authid using a report:
2/ On the "Batch record deletion" tool verify:
- authorities are display with the summary.
- the count usage (used in X biblios) is correct.
3/ After clicking on the "Delete selected recors" button, verify:
- The authorities have successful been deleted.
- if an error occurs, the tool display an error message.
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
$results is 1 upon success or a hash on failure.
Rather than check %$results || %error, I changed it to
$results!=1 || %error. Strangely, this works without
messy warnings. I believe this resolves the problem Katrin
mentions in comment #43.
TEST PLAN
---------
0) Make sure the system preference patronimages is set to Allow.
1) Apply all the patches
2) Login to staff client
3) Tools -> Upload patron images (it's in the bottom left)
4) Choose an image file, browse for a photo, enter a patron #.
5) Click Upload
6) Click the card number link
-- the uploaded photo should be visible on the left side of
the screen.
7) Run koha qa test tools.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Image uploaded without problems
No koha-qa errors
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
To satisfy qa tools, removing one tab somewhere..
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Sometimes our QA tools are pretty annoying, in cases like this, when its a
tab in a comment, .. I don't think we really need to hold up a patch
set for it
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Testing - this is a code-cleanup patch, so the purpose
of testing is to ensure that patron image upload functionality
still works. To test:
- Turn on the patronimages system preference
- Go to Tools | Upload patron images and import a suitable image
for a test patron.
- Bring up the test patron and verify that the image is attached.
- From the patron details page, upload a replacement image.
- Create a patron image ZIP file containing at least two images (
per the documentation of the patron image feature) and load it
via the patron image import tool.
- Verfiy that the test patrons now have images.
- Verify that tools/picture-upload.pl didn't report any errors
in the Apache error log.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Bug 11703 breaks the checkouts export feature.
To reproduce: Fill the ExportWithCsvProfile pref and go on the
circ/circulation.pl page. The export column appears, but not the export
button.
Test plan:
Go on the checkout list (circ/circulation.pl and members/moremember.pl)
and verify the export column and the export button appears.
If you click on the button, a file should be generated.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
- GetImportBiblios: prepare the query is useless here
- use Modern::Perl
- Remove useless indentation level in pl file and redirect to 404 if
required params are not given.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This follow up makes some corrections to the previously added files and
adds some functionality to the diff: A Javascript diff plugin highlights
the differences between the records in the two columns.
Corrections made: Converted tab indentation to spaces, corrected GPL
statement.
File organization: Moved showdiffmarc.pl and .tt to /tools/ to match the
location of the page with which it functions,
tools/manage-marc-import.pl. Corrected permissions on showdiffmarc.pl
accordingly.
Updates to the template: Added standard includes inclucing header menu
and breadcrumbs; converted custom layout to YUI Grid standard.
To test, follow the test plan previously defined:
- Stage a MARC record batch which contains at least one record match for
something already in your catalog.
- Locate the staged MARC record batch in Tools -> Manage staged records
and click to view the contents.
- Find the record which matched an existing record and click the "View"
link in the Diff column.
- The compare screen should include the header menu and breadcrumbs. The
differences between your staged file and the existing record should be
higlighted.
- You should be able to return to the MARC batch you were previously
viewing by following the link in the breadcrumbs or the link at the
bottom of the page.
- Confirm that the "About" page includes information about the new
JavaScript plugin on the Licenses tab.
Signed-off-by: Nick Clemens <nick@quecheelibrary.org>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
I forgot to include these files in the last patch
new file: tools/showdiffmarc.pl
new file: koha-tmpl/intranet-tmpl/prog/en/modules/tools/showdiffmarc.tt
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
New patch should apply correctly.
modified: C4/ImportBatch.pm
modified: koha-tmpl/intranet-tmpl/prog/en/modules/tools/manage-marc-import.tt
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Bug 11876 - Diff column is now displayed.
If a match is found, a 'View' link appears in the Diff column.
Old patch was not implementing datatables, and therefore was not compatible with this version of Koha.
modified: koha-tmpl/intranet-tmpl/prog/en/modules/tools/manage-marc-import.tt
modified: tools/batch_records_ajax.pl
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
These patches have some issues but I'm going to submit a follow-up which
I think will address them all and offer some improvements as well.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
[1] Routine add_cron_job was added in 2007 but has not been defined.
Parameter Recurring is not used.
[2] Made some changes to koha-conf.xml. Instead of an example to edit,
I replaced it by the SCRIPT_NONDEV_DIR install variable.
[3] SCRIPT_NONDEV_DIR had to be included in rewrite-config.pl and the
path had to be corrected for dev installs in Makefile.PL
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Tested single and dev install for supportdir change.
Compared installations with and without the patches for this report.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
At some stage the runreport.pl cronjob was changed to accept longopts, but the scheduler script wasn't changed along with it. This patch fixes the mismatch.
To test:
1. make sure that your user is not in at.deny, and (if applicable/necessary) is in at.allow
1.5 test this on a package install, sending mails will still not work for git installs, even with this patch.
Useful, but not required step: make sure email can be sent from your server, also helpful is access to the Koha user's mail box (to see the bounce messages)
2. create a saved sql report to run
3. Go to Tools -> Task Scheduler and schedule a job to be run, and results emailed to you
4. note that you do not (without the patch) get an email. Make a note of the command it reports it is going to run.
5. apply the patch
6. schedule another job, you will notice that the command to run the scheduled job is slightly changed compared to the one in step 4.
7. Receiving an email when your job runs means the patch worked. Seeing --format= and --to= in the command also means the patch worked, as this is the command that runreport.pl is expecting.
8. Run the koha QA test tool.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
NOTE: The line that changes is visible in the bottom section,
"Jobs already entered", with the corrected parameters and
path used. If you do not have the <supportdir> config
parameter set up in koha-conf.xml, it defaults to the
typical package path. If you have the parameter set up,
the path given matches what you tell it. Only tested in
git.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Test plan
1/ run ./tools/export.pl
2/ notice an error like cannot open 0: No such file or directory at ./tools/export.pl line 209.
3/ apply patch
4/ run again
5/ no errors
Signed-off-by: Chris <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, adding an additional check.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Works as described, hides the borrowernumber from the list
of fields to edit and also brings back the list of fields
for the sample file in the documentation.
Passes tests and QA script.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch remove borrowernumber from the borrower list fields and
display the field list in the notes.
Test plan:
- verify that the list of fields is displayed on the right (Notes).
- verify the borrowernumber is not displayed anymore in the field list.
Signed-off-by: Petter Goksoyr Asen <boutrosboutrosboutros@gmail.com>
Confirmed that this patch removes borrowernumber from list of default
values, and reintroduces missing list of CSV columns in the Notes field.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Added server-side validation and feedback to Koha news.
TEST PLAN
---------
1) Log in to staff client as someone who can add news
2) Paste a variation of the ugly following URL into your
address bar:
https://demo.library-admin.kohasystem.ca/cgi-bin/koha/tools/koha-news.pl?op=add&lang=&branch=&title=&from=&to=&number=&new=
-- A blank news item is added without warning!
3) Apply patch
4) Repeat step 2
-- "ERROR: Required news title missing!" is displayed
and no blank news is added
5) run koha qa test tools
Followed test plan, Error message appears as expected, qa test tool: OK
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
To reproduce:
1/ define/set up extended pattron attribute in administration module,
2/ using "Tools -> Import patrons", try to import some sample patron
record[s], having some arbitrary (non-empty) value assigned in
'pattron_attributes' CSV column for attribute defined in step 1/,
3/ observe that extended attribute defined in step 1/ was not imported
(not added to the database), without any warnings.
This patch restores a small code chunk which went AWOL somewhere around
commit b4158f2d24.
To test:
1/ apply patch & retest,
3/ ensure that this issue is no longer reproductible, and there are no
apparent regressions of any kind,
4/ make sure that the ability to specify default value for extended
attributes added in bug Bug 12716 is still working as intended
(= follow up the test plan for bug 12716).
Signed-off-by: Petter Goksoyr Asen <boutrosboutrosboutros@gmail.com>
Patch fixes import of extended patron attributes.
Step 1-3 in test plan confirmed.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
To test:
- Install two language variants (e.g. de-DE and de-CH)
- Create OPAC news for each of them
- Verify that they are displayed in OPAC as appropriate
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Works Ok, no koha-qa errors
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works ok, all installed languages now show up in the pull downs
and display for the selected language in the OPAC.
Passes tests and QA script.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
It would be helpful to be able to use the batch patron modification tool
to update city, state, zipcode, and country. This patch adds this
functionality.
This patch corrects an error in the batch modification script which
would have incorrectly marked first name as required if surname was
required.
This patch also converts the table sorting configuration to use table
header class names instead of index-based sorting for columns containing
dates.
To test, apply the patch and submit a batch of patrons to the batch
patron modification tool (Tools -> Batch patron modification).
In the list of patrons which will be modified you should see columns for
city, state, zipcode, and country. Table sorting should work correctly
without errors, including the registration and expiry date columns.
In the list of fields which can be batch modified you should see inputs
for city, state zipcode, and country. These fields should correctly
reflect mandatory/not mandatory based on the BorrowerMandatoryField
system preference.
Submit batch changes to a variety of fields and confirm that changes are
applied correctly. On the page of results the table should correctly
show all fields and be sorted correctly.
Signed-off-by: cachan <pierre.lorgue@ens-cachan.fr>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The $lines_read++; was before the code which skipped empty
lines. By moving it after the next unless $barcode; code, the
$lines_read variable only counts potential barcodes, and does
not include empty lines.
TEST PLAN
---------
1) Apply patch.
2) Attempt a valid barcode file with empty lines.
-- The potential barcode count should exclude the empty lines.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Empty lines are now no longer counted as potential barcodes.
Passes tests and QA script.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The inventory tool had no form of validating on what was assumed
to be a valid barcode number.
To solve this, an extra loop to read before processing was added.
This allows to validate length and content. By using a check
of \p{Print}, this includes Unicode characters such as umlauts,
but excludes unusual control characters.
The template was modified to accomodate validation messages
related to the length and content errors. Additionally, it says
how many "barcodes" were read. Barcodes are supposed to be on
separate lines.
TEST PLAN
---------
1) Attempt to select a file which does not contain barcodes and
is not a text file.
-- a horrible lack of validation and spamminess ensues.
2) Apply patch
3) Create three files.
a) One containing valid barcodes on each line
-- this file should trigger no errors. Attempt a valid
barcode with an umlaut.
b) A copy of the first with an extra line of >20 characters
(e.g. The Quick Red Fox Jumped Over The Brown Fence^A^B^C)
-- this file should trigger the singular error message case.
^A^B^C are actually CTRL-A,CTRL-B,CTRL-C, and it is left
as an exercise to the reader to add them to the line.
c) A copy of the second with the last line duplicated
-- this file should trigger the plural error message case.
4) Attempt each of the three files.
5) Run koha-qa tools.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
I have a feeling that the column size could be better fetched from
Koha::Database. But it is an improvement in functionality signing off
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, no problems found.
Passes tests and QA script.
Another thing for another day:
Empty lines are counted for the potential barcodes.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Works as expected, tried with arab strings, umlauts and no regressions found.
This patch removes HTML code from batchMod.pl
To test:
1. Check no regressions on batchMod editor,
Go to Tools > Batch item modification,
put a know barcode on barcode list, press continue
2. Check new line on translation files, update
a language, look for 'Tag editor'
Fixed capitalisation
Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Amended patch, a stupid mistake on line 198 of batchMod-edit.tt
- [% javascript %]
+ [% mv.javascript %]
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, no problems found.
Passes tests and QA script.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
To reproduce:
- Go to Tools > Import patrons
- Notice branchcode and categorycode don't have dropdown menus with
valid options.
- Notice dateofbirth, dateenrolled and dateexpiry don't have date-pickers
- Notice each input field is labeled with the column name instead of a
proper description.
To test:
- Apply the patch, go to Tools > Import patrons
- Notice branchcode and categorycode have dropdown menus with valid options,
and by default the empty value is selected.
- Notice that if you go into the dateofbirth, dateenrolled and dateexpiry
fields, a nice date picker widget appears.
- Notice each field is labeled with the field description, and that the
column name is conveniently shown at the right of the input field.
Important: test switching the ExtendedPatronAttributes syspref, and verify that
if enabled, the patron_attributes field appears, and also the checkbox selector
controlling the extended patron attributes import behaviour shows too.
Bonus points: Verify that on a different language, the descriptions get translated,
and the column names show correctly
Regards
To+
Signed-off-by: Aleisha <aleishaamohia@hotmail.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes tests and QA script.
Works as described, no regressions found.
Dates are output in ISO/database format, this is ok.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
After commit 6973e3b7d5, patron category
filter in batch patron deletion tool (tools/cleanborrowers.pl) doesn't
work properly any longer. It's still possible to choose a patron
category as selection criterion, but this criterion is being
efectivelly ignored on futhers steps.
As a result, all patrons (with no check-outs and no outstanding
account balance) may get mistakenly deleted when using this tool,
despite their respective categories.
To test:
1/ apply patch
2/ follow the test plan[s] for Bug 11975
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, no problems found.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Perl formatting and cleaning.
Also corrects the HTML of results table in viewlog.tt.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
When you try to export the result of tools/viewlog.pl in csv, file
cannot be correctly loaded :
- newline is missing after each record,
- strings should be enclosed in ""
- columns are not the same as for screen output
This patch corrects this by using like other export Text::CSV.
Adds a header line made with the keys of first data. For that, all data
values are initialiszed with empty string.
Test plan :
- Use a database with some logs, see sysprefs
/cgi-bin/koha/admin/preferences.pl?tab=logs
- Go to export page /cgi-bin/koha/tools/viewlog.pl
- Select a module
- Click on "To a file" and choose a file name
- Click on "Submit"
- Open file
=> Without this patch : newline is missing, multi-lines cells are not
enclosed in "", there are no column headings
=> Without this patch : each line is a data line, complexe cells are
enclosed in "", there are column headings
- Test the export of all modules to see that all headings are necessary
- Check the output to screen in the browser
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
The CSV export is significantly improved. I question the usefulness of
including biblioitemnumber in the output. A better inclusion would be
itemnumber.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
While this feature is still not perfect, this is a big improvement.
Passes tests and QA script, restores basic functionality.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Differences between circ-menu.tt and circ-menu.inc always crop up when a
new menu item is added--usually only to circ-menu.inc as happened with
Bug 9261.
Other sidebar differences are present due to differences in the patron
data passed by various patron-related script to their templates. This
patch also irons out some of these inconsistencies.
To test, apply the patch and check out to a patron whose record has more
than just basic data: othername, country, patron attributes, street
number, road types, etc. View the following pages and compare the patron
data and visible tabs to confirm that they match:
circ/circulation.pl?borrowernumber=X
members/boraccount.pl?borrowernumber=X
members/files.pl?borrowernumber=X
members/mancredit.pl?borrowernumber=X
members/maninvoice.pl?borrowernumber=X
members/member-flags.pl?member=X
members/member-password.pl?member=X
members/moremember.pl?borrowernumber=X
members/notices.pl?borrowernumber=X
members/pay.pl?borrowernumber=X
members/paycollect.pl?borrowernumber=X
members/purchase-suggestions.pl?borrowernumber=X
members/readingrec.pl?borrowernumber=X
members/routing-lists.pl?borrowernumber=X
members/statistics.pl?borrowernumber=X
tools/viewlog.pl?do_it=1&modules=MEMBERS&modules=circulation&src=circ&object=X
The only difference I've found which is not fixed by this patch is the
display of extended patron attributes in the sidebar of moremember.pl.
This is a piecemeal fix for a problem which really deserves a
centralized solution, but at least it gets us back to consistency for
the moment.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Going through all tabs shows consistency is back. A mid term solution should
implement this in a centralized way. Great job Owen!
No koha-qa errors btw.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Since we switched to Template Toolkit we don't need to stick with the
sufix we used for HTML::Template::Pro.
This patch changes the occurences of '.tmpl' in favour of '.tt'.
To test:
- Apply the patch
- Install koha, and verify that every page can be accesed
Regards
To+
P.S. a followup will remove the glue code.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The '~~' smartmatch operator is used to compare MARC::Field->subfield(code)
(i.e. a string) and the text element of each MARC::Field->subfields() which
is also plain text.
Substituting '~~' for 'eq' should be harmless then.
Regards
To+
Sponsored-by: Universidad Nacional de Cordoba
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes QA script and tests.
Tested batch modification of items, no problems found.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch is a dirty way to fix a design issue on notices.
Currently the code assumes that a letter code is unique. Which is wrong,
the primary key is module, code, branchcode.
Maybe we should add a primary key (id) for the letter table in order to
pass the id to the template and correctly manage the letter code
duplication.
Test plan:
Try to duplicate a letter code using edit, add and copy actions.
If you manage to do it, please describe how you did.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
The GetLetters subroutine should return an arrayref with different
letters for a module.
Test plan:
0/ Delete your notices with module=claimacquisition, claimissues,
serial
1/ Go on the late orders page (acqui/lateorders.pl) and verify you
cannot choose a notice for claiming
2/ Create a notice with module=claimacquisition
3/ Go on the late orders page (acqui/lateorders.pl) and verify you
can choose the notice for claiming
4/ Go on the Claim serials page (serials/claims.pl) and repeat the same
thing with the a "claimissues" notice
5/ Create a new subscription (serials/subscription-add.pl) and verify
you cannot choose a notification for patrons.
6/ Create a notice with module "serial" and verify you can.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script. Additional tests done:
- copy notice ODUE, on saving you are now prompted to choose
a new CODE for the notice
- edit new notice, try to set code back to ODUE. You are
prompted that the code is already in use.
This will prevent people from accidentally overwriting a letter
with the same letter code.
There were database handles being shared between a parent and a child
process, which is a big no-no, and was leading to crazy crashes. Fine
under CGI, but not in a persistent environment. This causes the child to
make a new database handle to use. Also some small cleanups.
To test:
* In a plack environment,
* Tools -> stage MARC records for import
* Use a reasonable size file (but not too big as it all goes into RAM -
I made one about 40MB.)
* Make sure that it works, and that the progress bars progress.
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Tested with a 55M file, I reproduced the error and I confirm this patch
fixes it.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
The MARC export tool now includes the option to specify a file
containing record IDs to export. When run on the command line,
this is specified using the --id_list_file switch.
Note that the list of IDs acts as a filter on other criteria
for selecting records to import. For example, if you export
all bibs belong to a given library and also specify an ID file,
the bibs must both belong to the library and be in the ID file.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Work as described. No errors
Tested writing txt file with biblionumbers, loading in tools and exporting
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Test:
1. Edit a bib record, add 100.000 chars text to 500a
2. Go to Tools -> Export data (or run tools/export.pl on
the command line)
3. Verify that exporting as XML includes the record
4. Verify that exporting as MARC does not include the record,
and that you get the following warning:
export.pl: record (number 2025) length 102668 is larger than the MARC spec allows (99999 bytes) at...
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Work as described. No errors
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch consolidates the code for constructing the parameters for
GetBorrowersToExpunge() into a subroutine. As a side-effect, this
fixes a regression introduced by the main patch where no patrons would
be deleted when filtering by expiration date.
To test:
[1] Follow the test plan in the main patch.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch tries to improve the code for the cleanborrowers.pl tool.
- use KohaDates plugin and Koha::DateUtils for date management,
removing a dependency on C4::Dates
- replace variables step1, step2 and step3 with step
- add a JavaScript check if no action if checked
Test plan:
- Backup your DB
- Play with the Patron deletion/anonymisation tool and try to find
something inconsistent.
If you don't find something different, it works!
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
The ajax responder for the quote editor was using the wrong error codes.
These have been fixed. Also, a small fixup to get rid of some annoying
warnings.
To test:
* Under plack,
* Add/edit/delete a quote.
* Make sure that things don't crash.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
The import patrons tool will add restrictions in the previous style (
directly to the borrowers table ). This will actually work, but
will result in the restriction being un-removable, and will be
overwritten by any new restrictions.
Test Plan:
1) Apply this patch
2) Import new patrons with debarrments, note the debarment is created
correctly
3) Import existing patrons with overwrite enabled, note that any new
debarrment is added, and any existing debarrment is ignored
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
If the letter.content is undef, the content.length test in the letter
template will trigger warning:
Argument "" isn't numeric in numeric gt (>).
This patch eliminates that warning.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
If the name is not in email, the name is not correctly retrieved.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
On editing a letter, the letter name is not displayed. So if you save
it, the letter name is erased with an empty string.
Signed-off-by: Olli-Antti Kivilahti <olli-antti.kivilahti@jns.fi>
Tested by setting the "Name"-field in letter.pl, saving, re-editing and verifying
that the email is present in the letter's "Name"-field.
The letter "Name" is replicated for each template in the DB, but that doesn't
incur any performance penalty.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch adds:
- a new routine C4::Overdues::GetOverdueMessageTransportTypes.
- the ability to define one or more transport types for an overdue
level.
Test plan:
- go on tools/overduerules.pl.
- verify that previous rules still exist and that the 'email' checkboxes
is checked if a rule is defined.
- redefined rules at different levels and check the transport type
needed. Currently, only email, sms and print are relevant
- Save the changes.
Signed-off-by: Olli-Antti Kivilahti <olli-antti.kivilahti@jns.fi>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch adds:
- a new jquery plugin : insertatcaret.
- the ability to define a notice template for each transport type.
- a new routine C4::Letters::GetMessageTransportTypes.
Test plan:
- Go on tools/letter.pl and check that all existing notices are still
there.
- Modify one. A new empty message is present for sms, print, etc. The
email message is filled with the existant value.
- Add a message for sms for example (don't forget the subject) and save.
- edit again and verify the sms message has been saved.
Signed-off-by: Olli-Antti Kivilahti <olli-antti.kivilahti@jns.fi>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This should correct issues with the output_prefs in the
compareinv2bar logic section of tools/inventory.pl
It is a follow up to bug 11253.
TEST PLAN
---------
NOTE: There should be no distinguishable difference before and
after the patch. This corrects a works by accident bug.
Back up DB.
Create a small barcode file from books in a given branch.
Set I18N/L10N system preference of dateformat to mm/dd/yyyy.
Go to inventory/stocktaking tool.
Browse for the barcode file.
Click submit just below the 'Use a barcode file' section.
All looks fine in mm/dd/yyyy format.
Set I18N/L10N system preference of dateformat to yyyy-mm-dd.
Go to inventory/stocktaking tool.
Browse for the barcode file.
Click submit just below the 'Use a barcode file' section.
All looks fine in yyyy-mm-dd format.
Set I18N/L10N system preference of dateformat to dd/mm/yyyy.
Go to inventory/stocktaking tool.
Browse for the barcode file.
Click submit just below the 'Use a barcode file' section.
All looks fine in dd/mm/yyyy format.
Apply patch
Restore DB (so results should be comparable to the first result)
Repeat the three testing blocks above.
There should be no visible difference.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch fixes a stray call to output_pref() that had not been
updated by the patch for 10380, which caused a crash when uploading
a barcode file when the dd/mm/yyyy dateformat is in use.
TEST PLAN
---------
Set I18N/L10N system preference of dateformat to dd/mm/yyyy.
Go to inventory/stocktaking tool.
Browse for the barcode file.
Select the branch (i.e. not All libraries) to match.
Click submit
KABOOM!
Apply patch
Go to inventory/stocktaking tool.
Browse for the barcode file.
Select the branch (i.e. not All libraries) to match.
Click submit
Table displays dates in "Unseen since" column.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Before the patch, I had this error when using dateformat=ddmmyy:
Template process failed: undef error - The 'day' parameter ("2014") to DateTime::new did not pass the 'an integer which is a possible valid day of month' callback at /usr/local/share/perl5/Params/Validate/PP.pm line 633.
This patch corrects the problem.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script.
Confirmed problem before applying the patch. Tested with the
patch all dateformat setting still work correctly.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This hashref is useless, it is only used once.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This adds the ability to specify whether staff, OPAC,
or slip news entries apply to all libraries or just a
particular library.
With the branch parameter added to key functions in
C4/NewsChannels.pm, function calls in C4/Members.pm,
mainpage.pl, opac/opac-main.pl, tools/koha-news.pl, and
t/db_dependent/NewsChannels.t were needed.
Some license texts were updated.
Templates were modified to display, allow for entry and editing
of the branches selected.
TEST PLAN
---------
1) Having logged into the staff client, is the news displaying
correctly? Have you entered a news item which should not
display for this branch of logged in user?
2) Find a patron (with some items checked out?)
3) Print a slip
- News which is labelled 'All Branches' or for the same branch
as the one printing the slip should display on the slip.
- THIS DOES NOT AFFECT QUICK SLIPS
4) Home -> Tools -> News
- Can you edit a news item?
- Does the change save correctly?
- Can you filter based on location and branch correctly?
- Can you add a new entry correctly?
- Can you delete an entry correctly?
5) Open an OPAC client.
- Does only the news for all branches display?
6) Log into the OPAC client.
- Does the news for all branches and the specific branch display?
7) prove -v t/db_dependent/NewsChannels.t
- Does it run and all succeed?
- Does the code seem to catch the required cases?
8) Comparing the patched and unpatched versions of files affected,
are the license changes missing anything?
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Changed the add and update functions to use a hash reference
for the parameter, so that adding or subtracting parameters
should be easier. Added some POD for the add_opac_news and
upd_opac_news functions, so that developers would know how to
call it.
The hashref changes resulted in being able to return 0 for
failure and 1 for success. This meant adding a couple tests
to the test file.
And while testing, there was some sort of logic problem with
the matter of '' being all, but selecting all only showed
things set for all, and excluded particular languages, or other
interfaces.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
In the staff client, when you went to Home -> Tools -> News
the default 'Display location' is 'All'. Everything is correctly
displayed. However, if you change the filter it filters the
table correctly, but does not set the dropdown value to match.
This patch corrects this.
TEST PLAN
---------
1) Home -> Tools -> News
2) Change 'Display location' value and click 'Filter'.
- Is the 'Display location' value the same now?
(no)
- Are the correct values displayed?
3) Click 'New entry'
- Is it anything other than 'All'?
(no, and is this correct?)
4) Click 'Cancel'
5) Click 'Edit' for various news items with different locations.
- Does the 'Display location' get proper set?
(no)
6) Apply patch
7) Change the 'Display location' value and click 'Filter'.
- Does the 'Display location' value stay the same?
(this should be correct now)
- Are the correct values displayed?
8) Change the 'Display location' value to 'All' and click 'Filter'.
- Does everything display?
9) Change the 'Display location' value and click 'Filter'.
10) Click 'New entry'
- Does it match what the filter was?
(should match now)
11) Click 'Cancel'
12) Click 'Edit' for various news items with different locations.
- Does the 'Display location' get proper set?
(this should be correct now)
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
The template parameter { $lang => 1 } does not seem used in
master. It is unconfirmed whether this is used in earlier
versions of Koha.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Updated license text using
http://wiki.koha-community.org/wiki/Coding_Guidelines#Licence
for the base text.
TEST PLAN
---------
1) less tools/koha-news.pl
2) apply patch
3) less tools/koha-news.pl
- was any contributor information lost?
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Safe no op action
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Batch patron deletion/anonymization tool has some issues:
1) If 'dateformat' setting in I18N/L10N system preferences is set
to anything other then 'iso' (eg. 'metric'), bulk deletion when using
'expiration date is before' criterion is not working properly. Date
entered in this field will be efectivelly ignored (or possibly
sometimes wrongly interpreted as different date, in other format)
on the final patron deletion stage. This may result in deleting
(or moving to trash) more borrower records then intended.
2) Bulk/batch patron deletion should skip borrowers with
nonzero account balance (ones with oustanding fines or credits)
3) This tool shouldn't offer to choose as deletion criterion
those patron categories which have category_type set to 'S'
(= staff patron categories)
This patch fixes above mentioned problems. It also adds an option
to "test run" patron batch deletion, and makes this option
the default choice in "warning" stage.
Test plan:
- prepare test database with some patron records (at least 2,
the more the better) set up in such a way that they will be vulnerable
to issues 1 & 2
- confirm issues 1,2
- restore test database
- apply patch
- ensure issues 1 & 2 are no longer present - first by using new "test
run" option: for #1, record counts in "warning" stage and "final" stage
should be now the same; for #2, observe that patron records with nonzero
balance are now excluded from deletion
- redo the tests, this time choosing "delete permanently" and "move
to trash" instead of "test run"
- test #3 by changing "Category type" to "S" in some
test patron categories - after that, those categories should no
longer be choosable as deletion criteria.
Signed-off-by: Magnus Enger <digitalutvikling@gmail.com>
Tested with dateformat = dd/mm/yyyy. I tested with two expired patrons,
one with fines and one without. Before the patch a lot of unexpected
patrons were deleted along with the expected ones. After
applying the patch only the expired patron was deleted, not the
one with fines. The test run and the "real" run reported correct numbers.
The patch also makes sure no patron categories with category_type = S
are suggested for batch deletion.
Note: The ergonomics of the "Batch delete/anonymize" tool is hardly
optimal, but this patch fixes a real, data-loosing bug, so let's
deal with the ergonomics later.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This reverts commit c9905750e5.
Test plan:
1/ Open a bib record with more than 1 item ,
2/ Select all items
3/ Chose Modify selected items
4/ put you "ق ك و" in notes
5/ Verify the items have been updated correctly
6/ put you "éàç" in notes
7/ Verify the items have been updated correctly
8/ put you "ق ك و éàç" in notes
9/ Verify the items have been updated correctly
Patch behaves as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Confirmed bug on master and that the patch fixes it.
Passes all tests and the QA script.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Some libraries would like to add a check on the cardnumber length.
This patch adds the ability to restrict the cardnumber to a specific
length (strictly equal to XX, or length > XX or min < length < max).
This restriction is checked on inserting/updating a patron or on importing
patrons.
This patch adds:
- 1 new syspref CardnumberLength. 2 formats: a number or a range
(xx,yy).
- 1 new unit test file t/Members/checkcardnumber.t for the
C4::Members::checkcardnumber routine.
Test plan:
1/ Fill the pref CardnumberLength with '5,8'
2/ Create a new patron with an invalid cardnumber (123456789)
3/ Check that you cannot save
4/ With Firebug, replace the pattern attribute value (for the cardnumber
input) with ".{5,10}"
5/ You are allowed to save but an error occurred.
6/ Try the same steps for update.
7/ Go to the import borrowers tool.
8/ Play with the import borrowers tool. We must test add/update patrons
and the "record matching" field (cardnumber or a uniq patron attribute)
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Tested adding, updating; importing and ran unit test.
Preliminary QA comments on Bugzilla
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Until now, the maximum number of item records to process in a batch was
hardcoded to 1000.
This patch adds a syspref MaxItemsForBatch in order to allow to adapt
this value.
Test plan:
- set the pref to 2
- try to delete a batch of 3 items: they are not displayed
- try to modify a batch of 3 items: you are not allowed to do that
- set the pref to 1000 and try again. Now items are displayed and you
are allow to modify them.
Signed-off-by: Christopher Brannon <cbrannon@cdalibrary.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch addresses a number of issues with the main patch:
- regression on bug 2060 (i.e., displaying authority import batches
correctly)
- regression on bug 10170 (translation of import record states)A
- use of datatables.inc
- lack of clarity as to the licensing of tools/batch_records_ajax.pl
- insufficent sanitizing of input used to generate an SQL statement
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Some libraries would like to sort by columns for the records of an
import batch. This seems like a good use of Ajax DataTables.
Test plan:
1) Apply this patch
2) Import a record batch into Koha
a) Use some form of matching
b) Have some records that will match and some that won't
c) Have at least 30 records so you can test the pager
3) Verify the new table is functionally equivalent to the old static one
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Tests fine and looks good with the exception of the corrections I put in
a follow-up.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
tools/pdfViewer.pl can be used to read artibrary files on the system.
It is actually an unused file, so leaving it around serves no purpose
and is dangerous.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
No regressions found.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch adds the first name and surname of the librarian and the
user involved in a transaction log, if available.
If neither the firstname or the surname is available, then the 'object'
number will be prefaced with the 'Member' qualifier.
_TEST PLAN_
0) This patch depends on Bug 11473, so you must apply it first
Before applying this patch (11477):
1) View the logs.
2) Note that the Librarian column just has a number
3) Note that the Object column will just say Member X (where X is a
number), in the circulation, fines, and patron/member modules.
Apply the patch.
4) Reload the logs (you don't need to make new ones)
5) Note that the Librarian and Object columns mentioned above now
have firstname and surname appearing (where available)
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, passes all tests and QA script.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch adjusts the check on action_logs.info to better detect
if the event concerns an item. This fixes a problem where the links
from log entries on item modifications would, if followed, result
in internal server errors.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch adds the words 'biblio' and 'item' to the 'info'
of the cataloguing logs which were missing them (such as biblio
delete, biblio mod, item mod, upload cover image).
This patch also adds 'authority' for authority mod.
_TEST PLAN_
Before applying:
1) Create/view mods for items, biblios, and authorities.
2) Create/view biblio deletion
3) Create/view upload cover image log
4) Note that none of these contain the words 'biblio','item',or
'authority' in their "Info" columns.
Apply patch.
5) Repeat steps 1-3
6) Note that the new logs contain 'biblio','item', and 'authority'
in their "Info" column, while the past ones don't.
7) Note also that 'biblio' and 'item' will have 'Biblio' and 'Item'
appear in their "Object" column for the new logs
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch fixes a problem where if a staff user has superlibrarian
permissions, but also has module-specific permissions, they are
prevent from editing item records that they should be allowed to.
To test:
[1] Turn on IndependentBranches.
[2] Register a superlibrarian staff user at branch A.
[3] Give that new account at least one other module-level
permission. This cannot be done through the user interface,
however, but can be done via SQL:
UPDATE borrowers SET flags = 3 WHERE userid = 'XXX';
[4] Log in as that new superlibrarian.
[5] Bring up the item details (catalogue/moredetail.pl) page for
an item at branch B. Note that there is no 'Edit Item' link.
[6] Similarly, try editing that item (cataloging/additem.pl). Note
that the edit form forbids you from touching the item.
[7] Finally, try editing that item using the Tools | Batch item
modification utility. Note that it doesn't allow you to do so.
[8] Apply the patch.
[9] Repeat steps 5 through 7. This time, the item actions should
be allowed.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, passes QA script and test suite.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
The method of checking the logged in user for superlibrarian privileges
is obtuse ( $userenv && $userenv->{flags} % 2 != 1 ) to say the least.
The codebase is littered with these lines, with no explanation given. It
would be much better if we had one subroutine that returned a boolean
value to tell us if the logged in user is a superlibrarian or not.
Test Plan:
1) Apply this patch
2) Verify superlibrarian behavior remains unchanged
Signed-off-by: Joel Sasse <jsasse@plumcreeklibrary.net>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Comments on second patch.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Mandatory item fields are not indicated the same way in all places. This
patch corrects two places where required fields were shown in bold
rather than using the standard "required" class: When adding an order
from a staged file and when adding an item for a new issue of a serial.
This patch also normalizes the text input size on item entry forms: In
some places it was 50, others 67. I have changed the latter to 50.
Unrelated changes: Added $KohaDates formatting of date and time and
corrected capitalization on a heading on the add order from staged file
page.
It would be nice to be able to use the same method for displaying the
item form as we use on neworderentry.tt -- pulling in the form from a
separate include. However that system is designed for handling multiple
items and would need to be adapted for these cases.
To test, you must have a staged file from which to add an order. Open an
existing basket or create a new one and choose to add an order "From a
staged file." Choose a staged file from which to order. The item entry
form under the "Import all" heading should show required fields in red.
To test in serials: Begin the process for receiving an item from an
existing subscription. On the serials-edit page, find the "Click to add
item" links and click to open the item edit forms. There should be one
under the numbered issue and the supplemental issue forms. In both cases
the item edit screen should show the mandatory item fields in red.
Confirm that the cataloging add item form looks correct and works
correctly.
Revision: Left out the "required" note which should appear after each
required field.
Signed-off-by: David Cook <dcook@prosentient.com.au>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Regex assumed all numeric characters were part of the tag number
This is obviously false as $9 would be a likely candidate
to be removed on export.
The code can be any printing ascii character other than space
according to LoC's website.
Also changed regexp to no longer allow a zero length tag number
which is nonsensical.
The old regex would accept shorter than 3 digit tags but these were
not stripped so I've removed that option, considering it a bug
not a feature
NB assumption that the code makes that a tag is always numeric is
incorrect but works in practice. Handling non-numeric tags is
a 'To be done'
Made code dependent on the regex succeeding. Picking up results
from a previous regex on failure can lead to weird hard to
identify bugs
In the course of testing Paola Rossi <paola.rossi@cineca.it>
spotted that the delete operation was flawed, only removing
the first occurence of the specified tag/tag subfield. Reworked
the delete loop to operate on all occurences
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
The cgi argument in missing for routine
C4::Reports::Guided::_get_column_defs. It causes a crash on generating
the CSV file.
Signed-off-by: Koha Team Amu <koha.aixmarseille@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This followup fixes some QA issues:
- replace the MySQLism SQL_CALC_FOUND_ROWS
- use Koha::DateUtils instead of C4::Dates
- replace "branch" and "location" with "library"
- fixe wrong capitalisation on "Clear all" and "Select all"
and fixes some behaviors:
- the inventory tools can be used without barcode file (fixed for the
csv export too).
- mark as not scanned a non scanned item.
- update the datelastseen 1 time per biblio (and fixes the displayed
count)
Signed-off-by: Mathieu Saby <mathieu.saby@univ-rennes2.fr>
Signed-off-by: Koha Team Amu <koha.aixmarseille@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
* when a file was uploaded and the comparison with catalogue range
requested, the comparison was wrong: the logic was wrong
* items that were not supposed to be scanned (ie: supposed to be on another shelf)
didn't had the author and title, it was hard to retrieve them on the shelved
* some useful fields were missing, like homebranch, location, status
* the CSV export contained all the item information. It should contain the same
informations as the screen
Behaviour now:
* scan a list of barcode & select a range of location
* if a barcode has been scanned and should not be (misplaced item),
the information is displayed
* if you choose "compare barcodes list to result option", the
resulting list contains all items that have been scanned and those
that were supposed to be. Any item not in both list appears with a
specific message on the last column
Signed-off-by: Leila <koha.aixmarseille@gmail.com>
Signed-off-by: Koha Team Amu <koha.aixmarseille@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 8015: Fix complains from qa tools
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Bug 8015: Get rid of the eval in ModifyRecordWithTemplate
This patch removes the use of eval in the
C4::MarcModificationTemplates::ModifyRecordWithTemplate routine.
Now this routine call the wanted modification routine with the list of
parameters.
This call is done only if the condition is respected.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Bug 8015: Get rid of eval for evaluating =~ m//
Koha::SimpleMarc::field_equals uses eval in order to check if a string
matches a pattern.
Now this eval is removed and the "regex" variable does not contain the
regex separated character (/ or |).
Regression: Before this patch, the user was able to user a modifier. Now
it is not possible.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Bug 8015: Get rid of the eval for substitution
Before this patch, the regex substitution was contain into only one
variable (e.g. my $regex = "/foo/bar/i").
Now each member of the regex is stored into a field in the
marc_modification_template_actions sql table.
In order to avoid a complex code, only modifiers i and g are take into
account.
Note: If you already add the mmta table, you have to drop it.
This patch also adds a foreign key from mmta to mmt tables.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Bug 8015: FIX ui issue
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Bug 8015: The template name is a required field
Test plan:
Try to add a template with an empty string as name.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Bug 8015: Fix template capitalization amd other template issues
Signed-off-by: Leila <koha.aixmarseille@gmail.com>
Bug 8015: Fix error where field object is returned instead of field value for fields without subfields
Signed-off-by: Leila <koha.aixmarseille@gmail.com>
Bug 8015: Fix bad ordering on function parameters
Signed-off-by: Leila <koha.aixmarseille@gmail.com>
Bug 8015: Escape escape characters for strings
Signed-off-by: Leila <koha.aixmarseille@gmail.com>
Bug 8015: Fix bad parameter list for direct external call to update_field
Signed-off-by: Leila <koha.aixmarseille@gmail.com>
Bug 8015: Fix problem with moving existing subfield value to nonexistent field/subfield
Signed-off-by: Leila <koha.aixmarseille@gmail.com>
Bug 8015: FIX QA issues
This patch fixes some stuffs failing qa tests: POD, indentation (tabs),
perlcritic
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
The MARC Modification Templates system gives Koha users
the power to make alterations to MARC records automatically
while staging MARC records for import.
This tool is useful for altering MARC records from
various venders work with your MARC framework.
The system essentially allows one to create a basic script
using actions to Copy, Move, Add, Update and Delete fields.
Each action can also have an optional condition to check
the value or existance of another field.
The Copy & Move actions also support Regular Expressions,
which can be used to automatically modify field values during the
copy/move. An example would be to strip out the '$' character
in field 020$c.
Furthermore, the value for an update can include variables
that change each time the template is used. Currently,
the system supports two variables, __BRANCHCODE__ which
is replaced with the branchcode of the library currently
using the template, and __CURRENTDATE__ which is replaced
with the current date in ISO format ( YYYY-MM-DD ).
At its simplist, it can perform functions such as:
Copy field 092$a to 952$c
At its most complex it can run actions like:
Copy field 020$c to 020$c using RegEx s/\$// if 020$c equals RegEx m/^\$/
Signed-off-by: Leila <koha.aixmarseille@gmail.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch adds a more extensible and flexible debarments system to Koha. The fields
borrowers.debarred and borrowers.debarredcomment are retained for compatibility and
speed.
This system supports having debarments for multiple reasons. There are currently
three types of debarments:
OVERDUES - Generated by overdue_notices.pl if the notice should debar a patron
SUSPENSION - A punative debarment generated on checkin via an issuing rule
MANUAL - A debarment created manually by a librarian
OVERDUE debarments are cleared automatically when all overdue items have been returned,
if the new system preference AutoRemoveOverduesRestrictions is enabled. It is disabled
by default to retain current default functionality.
Whenever a borrowers debarments are modified, the system updates the borrowers debarment
fields with the highest expiration from all the borrowers debarments, and concatenates
the comments from the debarments together.
Test plan:
1) Apply patch
2) Run updatedatabase.pl
3) Verify the borrower_debarments table has been created and
populated with the pre-existing debarments
4) Run t/db_dependent/Borrower_Debarments.t
5) Manually debar a patron, with an expiration date
6) Verify the patron cannot be issued to
7) Add another manual debarment with a different expiration date
8) Verify the 'restricted' message lists the date farthest into the future
9) Add another manual debarment with no expiration date
10) Verify the borrower is now debarred indefinitely
11) Delete the indefinite debarment
12) Verify the debarment message lists an expiration date dagain
13) Enable the new system preference AutoRemoveOverduesRestrictions
14) Set an overdue notice to debar after 1 day of being overdue
15) Check out an item to a patron and backdate the due date to yesterday
16) Run overdue_notices.pl
17) Verify the OVERDUES debarment was created
18) Return the item
19) Verify the OVERDUES debarment was removed
20) Disable AutoRemoveOverduesRestrictions
21) Repeat steps 15 though 18, verify the OVERDUES debarment was *not* removed
22) Add issuing rules so that an overdue item causes a temporary debarment
23) Check out an item to a patron and backdate the due date by a year
24) Return the item
25) Verify the SUSPENSION debarment was added to the patron
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
When staging biblios with items attached you previously had only two
options, add or don't add.
This patch adds a third option to replace an item record if a match is
found on itemnumber or barcode, else it adds the item.
Test Plan:
1) Stage a file of biblios with items attached.
2) Import the batch into the catalog.
3) Run the indexer so the matcher will match
4) Modify the item data for at least one bib in the file
5) Re-stage the file with the item matching option set to "Replace
items if matching bib was found"
6) Let the indexer run again
7) You should see updated item information after the overlay
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Henry Bankhead <hbankhead@losgatosca.gov>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
The patron lists feature is somewhat similar to the record lists feature
in that it allows a librarian to create a list of patrons for later
retrieval and manipluation. These lists can then be used with the batch
patron modification tool.
Test Plan:
0) Apply the patch for Bug 8798
1) Apply this patch
2) Run updatedatabase.pl
3) Access the patron lists feature from Koha's Tools menu.
4) Create a new list via the "New patron list" button.
5) For this list, click the "Edit" button, and change the list name.
6) For this list, click the "Add patrons" button, and search for and
add some patrons to your list.
7) For this list select some patrons to remove them.
8) Try both adding some new patrons, and removing some old patrons
as a single action.
9) Click the "Patrons" link on the Koha toolbar
10) Search the patrons, or browse by letter to get patron results
11) Check the checkboxes next to one or more patrons, and add the
selected patrons to your existing list.
12) Change the "Selected patrons" pulldown to "All resultant patrons"
and add them to your list.
13) Check the checkboxes next to one or more patrons, and add the
selected patrons to a new list.
14) Try manipulating a list of patrons using the batch patron
modification tool.
15) Go back to the Patron Lists feature and delete your lists.
16) Run 'prove t/db_dependent/PatronLists.t'
Signed-off-by: Nora Blake <nblake@masslibsystem.org>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Test Plan:
1) Apply this patch
2) Run updatedatabase.pl
3) Enable patronimages
4) Verify patron images are still displaying correctly
5) Test deleting a patron image
6) Test adding a patron image from moremember.pl
7) Test adding a patron image from tools/picture-upload.pl
Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch:
- adds a new column 'type' to the export_format table.
- renames the field name export_format.marcfields with
export_format.content.
Test plan:
- Check that existing profiles have the type "marc" selected by default
- Create a new profile with a type "sql"
- Save and verify the profile is correctly displayed when you select it.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Comment: Work as described. koha-qa reports Small tabs errors,
corrected in followup
Test:
1) go to Tools > CSV profiles, Create profile, current
2) Apply patch, run updatedatabase
3) Go to Tools > CSV profiles, new option present
old profile with type MARC
4) Create new profile MARC, save and show correct
5) Create new profile SQL, save and show correct
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
All tests and QA script pass with all 3 patches applied.
Works as described. Functionality for SQL profiles will be
added by another patch. For now it's possible to add/edit/delete
them.
Existing CSV profiles can still be exported correctly.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
After executing a batch items modifications, a dialog is displayed above
the result table. It contains the number of items (and total fields)
which has been modified.
Note that items that are selected for modification but which do not
end up actually be changed are not reported in the final counts.
This patch adds two methiods to C4::BackgroundJob, ->set() and ->get(),
that allow background jobs to pass arbitrary data back to the client.
Test plan:
1/ Go to tools/batchMod.pl
2/ Enter a barcodes list
3/ Check/uncheck items and fill some values to apply
4/ Save
5/ The table summary will be displayed with a dialog box on top:
XX item(s) modified (with YY fields modified)
Check that XX and YY correspond with what you expected.
Signed-off-by: Liz Rea <liz@catalyst.net.nz>
batch modification still seems to work correctly, with the helpful addition of the counter. Thanks!
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Sometimes when using the batch item modification tool, we would like to
automatically uncheck on loan items.
This patch also adds a new routine in C4::Circulation, IsItemIssued(),
which, when passed an itemnumber, returns whether the item is
currently on loan.
Test plan:
1/ Go to tools/batchMod.pl.
2/ Enter some barcode (at least 1 should be on loan).
3/ Click on the Continue button.
4/ Click on the "Clear on loan" link.
5/ Check that on loan items are unchecked.
Launch the unit test file:
prove t/db_dependent/Circulation/IsItemIssued.t
http://bugs.koha-community.org/show_bug.cgi?id=10572
Signed-off-by: Liz Rea <liz@catalyst.net.nz>
Works as expected, only modifies items that are checked (still). No regression noted.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Passes koha-qa.pl, works as advertised.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch adds functionality to forgive overdue fine when an item is
set to lost status. Fines are forgiven only when the syspref
WhenLostForgiveFine is set to yes. Item can be set to lost status from:
- catalogue/moredetail.pl
- cataloguing/additem.pl
- tools/batchMod.pl
- misc/cronjobs/longoverdue.pl
Changed subroutine C4::Circulation::LostItem to forgive fines on the
item depending on the value of syspref WhenLostForgiveFine. This
routine is currently used to return an item and charge a replacement
cost.
Also added a new syspref in C4::Circulation::LostItem -
WhenLostChargeReplacementFee. The replacement fee will now be charged
only if this syspref is set to yes. The default value of the
WhenLostChargeReplacementFee is yes, meaning that current behavior
will not change during upgrade.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Alex Hatley <alexh@cctexas.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Testing notes on last patch in series.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch updates the wthdrawn field in items and deleteditems to be
withdrawn instead. No functional changes are made.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Comment: Save for translation files (that will be fixed on next release),
only occurrence of wthdrawn is on updatedatabase.pl
No koha-qa errors.
This touch many files, and I did not test everything,
but all seems normal. I think that any problem could
be fixed later.
Perhaps both entries in updatedatabase.pl could be joined
into one, but thats for QA.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This makes the POD for the columns() function consistent
with the rest of C4/Members.pm. It also removes a note
that can be relegated to the bug report and the Git
history.
Also, since C4::Members::columns() is not actually a
class method, this patch changes the invocation to
not call it that way.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This routine is not in used and does not make sense. It should not be
used later.
Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Passes koha-qa.pl, not references to get_branch_code_from_name found.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch makes the pre-population of the fields for the batch
item editor with the default values from the default framework
optional and off by default.
Test Plan:
1) Apply patch
2) Add default values for cost and replacement cost to the
default framework.
3) Browse to Tools / Batch item modification
4) Choose a file, or entire some barcodes in the text area
5) Ensure that the 'Populate fields with default values from default
framework' is *not* checked
6) Click 'Continue'
7) Observe that the fields for cost and replacement cost are blank
8) Click the 'back' button on your browser
9) Check the checkbox to enable the default value
10) Click 'Continue'
11) Observe that the fields for cost and replacement cost now contain
the default values you assigned them in the default MARC framework
Signed-off-by: David Cook <dcook@prosentient.com.au>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Switch works correctly, all tests and QA script pass.
Note: there is a bug with default values for all non text input
fields. Default values won't be applied for those fields as the
pull downs are not preselected correctly with the default values
defined in the framework.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Remove the unrequired extra processing and pass
the array of itemnumbers as itemnumbers_array
Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Small typo in query construction, fixed.
To test:
1) Try filtering a MARC export using "Start date"
2) Notice the lack of filtering
3) Apply patch
4) Try export again, records are filtered by dateaccessioned
Signed-off-by: Cedric Vita <cedric.vita@dracenie.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Test Plan:
1) Enable IndependantBranches
2) Apply this patch
3) Run updatedatabase.pl
4) Verify that the system preference still functions correctly
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
The correct matching record was not always shown on the manage staged
MARC page. This patch corrects the issue and provides the template with
the appropriate ID for the matched record regardless what type of record
it is.
To test:
1) Create a matching record for authorities. For MARC21, the following
is a good choice:
Matching rule code: AUTHPER
Description: Personal name main entry
Match threshold: 999
Record type: Authority record
[Match point 1:]
Search index: mainmainentry
Score: 1000
Tag: 100
Subfields: a
2) Create a record that has the appropriate fields for being matched
with that rule (if you don't already have one).
3) Save the authority record as MARC (Unicode/UTF-8).
4) Stage the file choosing your new matching rule.
5) Note that with these patches, you get a link to the existing
authority and without them you could get any number of strange
things.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script. Additional tests done:
- staged bibliographic records and matched with different
rules and actions. Undid the import.
- staged autohrity recods and matched with the example rule.
Undid the import.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Remedied by:
- in Circulation.pm changing AnonymiseIssueHistory so that it returns ($rows, $err_history_not_deleted) instead of $rows
- consequential change to misc/cronjobs/batch_anonymise.pl to handle updated return value, and fail if there is an error
- consequential change to tools/cleanborrowers.pl although this still fails silently (raised as bug 9944)
- update of opac-privacy.pl to check return value and pass on error
- update of opac-privacy.tt to display error if appropriate
Note bug 9942 remains unfixed, which is a similar issue upon issue return.
To test:
1. OPAC
- enable privacy mode (preference OpacPrivacy)
- leave anonymous patron set to zero (preference AnonymousPatron)
- attempt to delete user history
- observe error
- check history - still there
- change anonymous patron to a valid user
- attempt to delete user history
- observe success message
- check history - gone
2. cleanborrowers.pl
- test it functions as before. bug 9944 has been raised for it continuing to silently fail.
3. batch_anonymise.pl
- enable privacy mode (preference OpacPrivacy)
- leave anonymous patron set to zero (preference AnonymousPatron)
- run script (I use --days -1 for testing)
- script should fail with a Carp message
- change anonymous patron to a valid user
- run script as before
- script returns quietly
- check history - gone
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Mason James <mtj@kohaaloha.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Adds utf8 cgi parameter decoding.
Test plan: Enter diacritics in librarian field. Submit. Check.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
This is ok in this case, as we are not doing any post/get of binary
data, but I note from the man page
This makes CGI.pm treat all parameters as UTF-8 strings. Use this with
care, as it will interfere
with the processing of binary uploads. It is better to
manually select which fields are expected
to return utf-8 strings and convert them using code like
this:
use Encode;
my $arg = decode utf8=>param('foo');
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
The calendar management page uses the old tablesorter plugin. This patch
replaces tablesorter code with DataTables.
In order to easily sort date columns under various dateformat system
preference settings, date columns now sort based on an unformatted date
in a <span>'s title attribute (requiring the patch for Bug 9887).
To test, view the calendar page--preferably with plenty of existing
holiday data to populate the holiday summary tables. Confirm that
sorting works correctly on all sorted tables with the dateformat
preference set in all settings.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Note: This has to be tested together with the patch for bug 9887.
All tests and QA script pass.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
The routing list tab displays on patron pages even if the RoutingSerials
preference is OFF. Display of the tab should be conditional on that pref
being turned on.
This patch adds a check for the RoutingSerials preference to the menu
include files and amends the affected scripts to make the variable
available on the pages where those includes are used.
To test, view the following pages with RoutingSerials both on and off.
The routing list tab should be shown and hidden accordingly:
- Circulation
- Patron details
- Patron fines
- Pay fines
- Pay amount/selected (click from the Pay fines page)
- Create manual invoice
- Create manual credit
- Patron circulation history
- Patron modification log
- Patron notices
- Patron routing lists
- Patron statistics
- Patron files
- Patron permissions
- Set patron password
- "Can't delete patron" page (try to delete a patron with checkouts).
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Touches a lot of files, but only a tiny change in each, works well.
Could perhaps be set in C4/Auth instead, but that's no reason not to
sign off
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
All tests and QA script pass.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This allows users to select any columns from items and adds new
items.fine field introduced by previous patch to user interface.
Note: This works as expected. items.fine appears as an option and gets inserted in the notice template as expected.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
