Based on work for report 9722.
This patch resolves a small display problem with the number of columns of the
table on opac-reserve.
Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch groups all loops on the new_results array into one.
It is useless to loop on the same results array several times.
Test plan:
Quite hard to test all cases.
This patch deals with 5 sysprefs:
COinSinOPACResults, Babeltheque, TagsEnabled, TagsShowOnList and
OpacStarRatings.
Try to enable/disable all of them and verify there is no difference with
and without this patch.
The only different will be: The Babeltheque information should be displayed
even if the COinSinOPACResults syspref is disabled.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
This revised patch works fine for me, thanks.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Verified following system preferences still work as expected:
- COinSinOPACResults on/off
- TagsEnabled, TagsShowOnList, TagsInputOnList on/off
- OpacStarRatings
Couldn't test Babeltheque functionality as this requires an account.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
The option of adding a note is controlled by new pref OpacShowHoldNotes.
This development is part of a larger one (see umbrella report 9721).
Test plan:
1 Verify if new pref is disabled by default. Place a hold. You can't add a note.
2 Enable the pref. Place a hold and add a note. Check in staff if you can see
the note in Catalogue Detail/Holds tab.
3 Toggle SingleBranchmode, AllowHoldDateInFuture/OPACAllowHoldDateInFuture,
OPACShowHoldQueueDetails, or OPACItemHolds.
Check the display of columns when placing a hold from opac.
4 Place a few holds with notes from opac search results in one run (enable
DisplayMultiPlaceHold). Check results in staff again.
Remark: A few lines already refer to mandatory note reasons. This is handled
in a subsequent report. No reason to worry.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Renamed that routine to GetItemCourseReservesInfo in
order to avoid any potential confusion with reserves
qua hold requests.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
New modules should not export any symbols by default
without a very good reason.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Adds a course reserves system for academic libraries.
The course reserves system allows libraries to create courses
and put items on reserves for those courses.
Each item with at least one reserve can have some of its attributes
modified while it is on reserve for at least one active course.
These attributes include item type, collection code, shelving location,
and holding library. If there are no active courses with this item
on reserve, it's attributes will revert to the original attributes
it had before going on reserve.
Test Plan:
1) Create new authorised value categories DEPARTMENT and TERM
2) Create a new course, add instructors to that course.
3) Reserve items for that course, verify item attributes have changed.
4) Disable course, verify item attributes have reverted.
5) Enable course again, verify item attributes again.
6) Delete course, verify item attributes again.
7) Create two new courses, add the same item(s) to both courses.
8) Disable one course, verify item attributes have not reverted.
9) Disable both courses, verify item attributes have reverted.
10) Enable one course, verify item attributes are again set to the
new values.
11) Edit reserve item attributes, verify.
12) Disable all courses, edit reserve item attributes, verify
the item itself still has its original attributes, verify
the reserve item attributes have been updated.
13) Verify the ability to remove instructors from a course.
14) Verify new permissions, top level coursereserves, with
subpermissions add_reserves and delete_reserves.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Corinne Bulac <corinne.hayet@bulac.fr>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
http://bugs.koha-community.org/show_bug.cgi?id=8125
For reasons I cannot fathom, the split() in handling multi-branch
limits was not coming up with a valid search group code. Replacing
the split() with a substr() and creating the CGI parameter as a string
rather than as an arrayref fixes the problem. This problem may not
affect all installations, since I tested this exact feature just under
two months ago and it worked fine, and none of the relevant code has
been changed since then that I can see.
To test:
1) Create search group, and add at least one library to it, in
/cgi-bin/koha/admin/branches.pl
2) Apply patch
3) Try doing a search limited to your search group, making sure that
the search will match items that belong to a library in the search
group
4) Sign off
Signed-off-by: Magnus Enger <magnus@enger.priv.no>
I have failed to recreate the problem on three different dev installs,
both on Ubuntu and Debian, but the current patch does not break
anything as far as I can tell, so I'm signing off.
I tested with two libraries in the same search domain, with each
library owning a different book by the same author. Searching for
the author in
- all libraries,
- individual libraries and
- the search domain that contains both libraries
all return the expected results.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
All tests and QA script pass.
I couldn't reproduce the problem, but didn't find any regressions.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
The old pages for viewing and updating patron details in the OPAC have
been superceded by the new script opac-memberentry.pl. This patch
removes he old scripts and templates and corrects links to them.
This patch also removes reference to opac-userupdate.tt from
opac-patron-image.pl and replaces the authentication process with one
which uses check_cookie_auth, based on the example of opac-tags.pl.
To test, edit a patron record and set the "Gone no address" flag. Log in
to the OPAC with that account and view the patron details page. The
warning about out of date contact information should link to the new
update page.
Next, attempt to place a hold. You should see the same warning, and it
should also link to the new update page.
Test the display of patron images: Log in as a user who has an image
associated with their account and navigate to
/cgi-bin/koha/opac-patron-image.pl. Their patron image should display.
A search of Koha source files should return no results for the missing
scripts or templates.
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Comments on second patch.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
To reproduce:
- Make sure you do not have a session for the OPAC you will be testing
with. Delete the CGISESSID session cookie if you have one.
- Go directly to a detail view, e.g.:
/cgi-bin/koha/opac-detail.pl?biblionumber=1
- Observe the error "Can't use an undefined value as a HASH
reference at /home/magnus/scripts/kohadev/opac/opac-detail.pl line 445."
To test:
- Apply the patch
- Reload the page with the error
- You should now see the detail view of the record, as usual
Thanks to Chris Cormack who suggested the fix for this!
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Tested according to test plan, confirmed patch fixes the problem.
All tests and QA script pass.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
With the addition of opac-memberentry.pl to the OPAC we lost a way to
display the image associated with a patron's account. This patch adds
display of the patron image to opac-memberentry.pl now that
opac-userdetails.pl and opac-userupdate.pl are deprecated.
To test:
1. Log into the OPAC as a patron who has an image associated with their
account. View the "my personal details" tab and confirm that the
patron image appears with and without OPACPatronDetails enabled.
2. Log into the OPAC as a patron who has no image associated with their
account. View the "my personal details" tab and confirm that the
layout looks correct.
3. Turn off OPACpatronimages and confirm that the "my personal details"
page looks correct.
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Tested with OpacPatronDetails and OpacPatronImags turned on/off
and it's working well.
Template only changes.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
The $anyholdable variable was set to 0 or 1. However, as it is set in
a loop, and future changes to the opac-reserve.pl script may require
knowing how many items the patron is going to place a hold on, it makes
more sense to treat $anyholdable as a counter. This follow up turns it
into one.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
opac-reserve.pl tries to check whether all selected titles in a
multiple-hold batch are unavailable to be placed on hold. However, the
logic is flawed in such a way that if the last item in the batch cannot
be placed on hold the script assumes none can be placed on hold.
This patch modifies the way the script tracks the "no titles available
for holds" variable in order to correct the error.
To test, place multiple holds by selecting titles from a list of search
results. Test three conditions:
- All titles are available to be placed on hold
You should see no onscreen warnings, and all titles should be
selectable on the place hold screen. A "Place hold" button should
appear at the bottom.
- Some titles can be placed on hold, some cannot
The titles which can be placed on hold should be selectable.
Titles which cannot be placed on hold should show a warning
message. A "Place hold" button should appear at the bottom.
- No titles can be placed on hold
"Sorry, none of these items can be placed on hold." should appear at
the top of the page. All titles should appear with warning messages.
There should be no "Place hold" button.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
All tests and QA script pass.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Remedied by:
- in Circulation.pm changing AnonymiseIssueHistory so that it returns ($rows, $err_history_not_deleted) instead of $rows
- consequential change to misc/cronjobs/batch_anonymise.pl to handle updated return value, and fail if there is an error
- consequential change to tools/cleanborrowers.pl although this still fails silently (raised as bug 9944)
- update of opac-privacy.pl to check return value and pass on error
- update of opac-privacy.tt to display error if appropriate
Note bug 9942 remains unfixed, which is a similar issue upon issue return.
To test:
1. OPAC
- enable privacy mode (preference OpacPrivacy)
- leave anonymous patron set to zero (preference AnonymousPatron)
- attempt to delete user history
- observe error
- check history - still there
- change anonymous patron to a valid user
- attempt to delete user history
- observe success message
- check history - gone
2. cleanborrowers.pl
- test it functions as before. bug 9944 has been raised for it continuing to silently fail.
3. batch_anonymise.pl
- enable privacy mode (preference OpacPrivacy)
- leave anonymous patron set to zero (preference AnonymousPatron)
- run script (I use --days -1 for testing)
- script should fail with a Carp message
- change anonymous patron to a valid user
- run script as before
- script returns quietly
- check history - gone
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Mason James <mtj@kohaaloha.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Test plan:
1 - turn on EnableOpacSearchHistory
2 - launch some searches at the opac
3 - go to your search history
4 - there is no history!
5 - apply this patch
6 - retry steps 1 to 3
7 - your history search is available!
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
This does fix the bug, but does undo the change to make the cookie
utf-8 safe, however I think that change was done in the wrong way so
I am happy to sign this off
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Wondering if the comment line should be deleted now too.
Patch fixes the problem.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
When Bug 7570 added availability information to the cart it switched
which subroutine was used to get item information, and thus changed how
the information was being returned.
This patch makes accommodations for this change by adding processing of
item location information to the script in a way that will match the
existing template variables.
To test, add items to the cart in the OPAC some of which include
shelving location information. When you view the cart you should see the
shelving location displayed.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
The following errors appear when trying to use unapi under Plack (among
others):
Variable "$cgi" is not available at /home/jcamins/kohaclone/opac/unapi line 160.
Variable "$format_to_stylesheet_map" is not available at /home/jcamins/kohaclone/opac/unapi line 173.
Variable "$format_info" is not available at /home/jcamins/kohaclone/opac/unapi line 174.
Variable "$format_to_stylesheet_map" is not available at /home/jcamins/kohaclone/opac/unapi line 185.
To test:
1) Try to view /cgi-bin/koha/unapi under Plack
2) There is no step 2. Plack crashes.
3) Apply patch.
4) Try to view /cgi-bin/koha/unapi again, and note that it doesn't crash
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
I'm puzzled how this ever worked anyway, accidentally i'm guessing,
this tidies up some lazy coding
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This patch uses a lot of MARC21 XSLT to transform NORMARC records
to desired formats. Since NORMARC is mostly a subset of MARC21, I
think this should give passable results. And better results than
no unapi-support at all for NORMARC!
To reproduce:
- Make sure you have marcflavour = NORMARC
- Visit /cgi-bin/koha/unapi in a browser
- Observe the empty <formats></formats> element
To test:
- Apply the patch
- Visit /cgi-bin/koha/unapi in a browser
- Observe the the list of formats in the <formats></formats> element
- Import the provided sample NORMARC record and make a note of its
biblionumber
- View the record at /cgi-bin/koha/unapi?id=koha:biblionumber:x&format=y
where x = the biblionumber of the sample record and y = one of the
formats marcxml, marcxml-full, mods, mods-full, mods3, mods3-full,
oai_dc, rdfdc, rss2, rss2-full and srw_dc
- Check that the transformed records make some kind of superficial
sense
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Works exactly as it should according to the test plan. This is a nice
improvement.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Amended patch: Check OpacMaintenance!
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
To test
Search in the OPAC both logged and logged out
Signed-off-by: Magnus Enger <magnus@enger.priv.no>
When I turn off XSLT for the OPAC I can recreate the problem.
After applying the patch things work as expected for all
combinations of:
- Search results and detail view
- Logged in and not logged in
- XSLT and non-XSLT view
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests, QA script and test plan.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
In current implementation (mostly commented out in this patch)
uses heuristic to guess which strings need decoding from utf-8
to binary representation and doesn't support utf-8 characters
in templates and has problems with utf-8 data from database.
With this changes, Koha perl code always uses utf-8 encoding
correctly. All incomming data from database is allready
correctly marked as utf-8, and decoding of utf8 is required
only from Zebra and XSLT transfers which don't set utf-8 flag
correctly.
For output, standard perl :encoding(utf8) handler is used
so it also removes various "wide character" warnings as side-effect.
Test scenario:
1. make sure that you have utf-8 characters in your biblio
records, patrons, categories etc.
2. try to search records on intranet and opac which contain
utf-8 characters
3. install language which has utf-8 characters, e.g. uk-UA
dpavlin@koha-dev:/srv/koha/misc/translator(bug_6554) $
PERL5LIB=/srv/koha/ perl translate install uk-UA
4. switch language to uk-UA and verify that templates
display correctly
5. test search and Z39.50 search and verify that caracters
are correct
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
I followed the test plan, adding utf-8 characters to library names,
patron categories, titles, and authorized values. I tried the uk-UA
translation and everything looked good.
When performing Z39.50 searches for titles containing utf-8 characters I
got results which were still occasionally contaminated with dummy
characters [?] but I assume this is Z39.50's fault not the patch's.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Already signed, add mine.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
When in opac-topissues using filter "of the last:" with value "No limit", the result shows the caption : "The 10 most checked-out in the past 999 months".
This patch corrects a typo error : $timeLimit was used instead of $timeLimitFinite
Test plan :
- Go to OPAC most popular
- Select "No limit" in last filter and submit
=> Check that result displays caption : "The 10 most checked-out of all time"
- Come back
- Select "6 months" in last filter and submit
=> Check that result displays caption : "The 10 most checked-out in the past 6 months"
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
the my $branches = GetBranches();
already exist at line 444 (introduced by this patch)
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This feature enables a particular library's items to be emphasized and moved
to the first position on the search results and details pages of the OPAC.
It is enabled by the sytem preference HighlightOwnItemsOnOPAC.
To choose which branches items are emphasized, use the system preference
HighlightOwnItemsOnOPACWhich. It has two modes.
If set to PatronBranch, the items emphasized will be those of the same
library as the patron's library. If no one is logged into the opac, no
items will be highlighted.
If set to OpacURLBranch, the library is chosen based on the Apache
environment variable BRANCHCODE.
For example, this could be added to the OPAC section of koha-httpd.conf:
SetEnv BRANCHCODE "CPL"
The point of this feature is to allow each library on a given Koha server
to have a specific subdomain for the opac where that library's items are
empasized. That was http://branch1.opac.mylibrary.org will emphasize the
items of branch1, while http://branch2.opac.mylibrary.org will emphasize
the items of branch2.
Signed-off-by: Melia Meggs <melia@bywatersolutions.com>
Signed-off-by: Nora Blake <nblake@masslibsystem.org>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This patch adds the ability to add groups to the library select
pulldown on the opac, if it is enabled.
Test Plan:
1) Apply patch
2) Run updatedatabase.pl
3) Go to Administration › Libraries and groups
4) Create a new group, or edit an existing one
5) Ensure the 'Show in search pulldown' checkbox is checked
6) Save the group
7) Enable OpacAddMastheadLibraryPulldown if it is not already enabled
8) Load the OPAC, try the group search from the libraries pulldown menu
Signed-off-by: Liz Rea <liz@catalyst.net.nz>
Yes! Now this works, and well.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This follow up reinstates or add check for undef returned
by C4::Context->userenv, only where previous patch touch
code.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This patch replace use of CGI::scroll_list() to show list of branches.
In two files, marc21_linking_section.pl and unimarc_field_4XX.pl,
the scrolling list is created but not used in the template file,
so the code is removed.
Also minor renaming/normalizing of variables.
To test:
1) Install with some branches, records and patrons
2.1) Select a record, click 'Place hold', select user,
there is a library pull-down next to 'Pickup at:',
list is ordered case sensitive
2.2) Go to Reports > Average loan time,
next to Library is a pull-down,
list without order
2.3) Go to Reports > Catalog by item type,
next to 'Select a library' is a pull-down,
list is ordered case sensitive
2.4) This is tricky, go to Reports home,
change last part of URL 'reports-home.pl' with
'manager.pl?report_name=issues_by_borrower_category'
(can't find a direct link), next to 'Select a library'
is a library pull-down,
list without order
2.5) Edit/Add a patron, on section 'Library management'
there is a library pull-down, case sensitive
2.6) OPAC, as logged user, make a suggestion or hold,
there is library pull-down, correct order
3) Apply the patch
4.1) Repeat 2.1), correctly ordered list
4.2) Repeat 2.2), correctly ordered list
4.3) Repeat 2.3), correctly ordered list
4.4) Repeat 2.4), correctly ordered list
4.5) This is a bit more work
There are 3 possible situations to test:
A) No branches, must show a message that are no
libraries defined
B) New patron, must show a correctly ordered
list of branches, current branch selected
C) Edit patron, must show a correctly ordered
list of branches, patron branch selected
4.6) Small changes on variable names, so retest 2.6)
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
The two holdings tabs displayed whether
or not there is anything to go in them.
Signed-off-by: Corinne Bulac <corinne.hayet@bulac.fr>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
If one item list is empty, no empty tab is shown.
All tests and QA script pass.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
OPACSearchForTitleIn is a syspref used to add links as "more searches" in OPAC record detail page.
The links can contain vars depending on record values like title, ISBN, ...
Thoses values must be URL-escaped because they can contain special characters that will brake URL and/or HTML.
This patch add a method C4::Output::parametrized_url() that replaces vars in URL usign escape and UTF-8 encoding.
Test plan :
- Define in OPACSearchForTitleIn a link with all possible vars : TITLE, AUTHOR, ISBN, ISSN, CONTROLNUMBER, BIBLIONUMBER
- Edit a record to add special characters in title : ", &, ? ...
- Go to OPAC detail pages of this record
=> Check that URL is well encoded
=> Click on link to check the term is well encoded (diacritical characters, ...)
Signed-off-by: Liz Rea <liz@catalyst.net.nz>
Nice test plan, thanks!
Verified bug and fix - both look good.
Signed-off-by: Mason James <mtj@kohaaloha.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Remove that file that duplicates the behaviour of the correct
opac-changelanguage.pl file and fix references to it in the templates.
To test:
- Apply the patch
- Choose a different language in the OPAC
- It should work as expected.
To+
Sponsored-by: Universidad Nacional de Cordoba
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Tested again at RM's request
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Removed NoZebra vestiges. This comprises several code blocks that depend on the NoZebra syspref and NZ related functions/methods.
C4::Biblio->
GetNoZebraIndexes
_DelBiblioNoZebra
_AddBiblioNoZebra
C4::Search->
NZgetRecords
NZanalyse
NZoperatorAND
NZoperatorOR
NZoperatorNOT
NZorder
C4::Installer->
set_indexing_engine
Sponsored-by: Universidad Nacional de Córdoba
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Koha was not previously escaping CGI input, which caused problems for
highlighting and is a security issue.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Thx for fixing this.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This patch rewrites the GetReserveStatus routine in order to take in
parameter the itemnumber and/or the biblionumber.
In some places, the C4::Reserves::CheckReserves routine is called when
we just want to get the status of the reserve. In these cases, the
C4::Reserves::GetReserveStatus is now called.
This routine executes 1 sql query (or 2 max).
Test plan:
Check that there is no regression on the different pages where reserves
are used. The different status will be the same than before applying
this patch.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
The code in opac-showmarc.pl isn't smart enough to find the xsl files in
the "default" (prog) theme if the ccsr theme is enabled, so the "view
plain" option on opac-MARCdetail.pl fails ever time.
This patch copies some path-handling code from XSLT.pm to improve xsl
file path handling when dealing with a "sub-theme."
To test, view the MARC view in the OPAC and click the "view plain" link.
This should work correctly in prog and ccsr themes and with different
languages enabled (keeping in mind the ccsr theme will fail in general
for languages other than en).
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Checked plain view works in both prog and ccsr themes now.
All tests and QA script pass.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
To test:
Sign in to Koha via persona using an email that doesn't exist in Koha
Before the patch you will get into an infinite redirect loop
After the patch it will give you an error message
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Comment: Work as described. No errors.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Working on Mozilla Persona support (browser id)
This will let a user log into Koha using browser id, if their email
address used matches the email address inside Koha.
Once an assertion is received, we simply need to find the user that
matches that email address, and create a session for them.
opac/svc/login handles this part.
The nice thing about it is, the user doesn't have to do anything, like
linking their account. As long as the email address they are using to
identify themselves in browserid is the same as the one in Koha it
will just work.
This is covered by a systempreference, to allow people to do it, and
is of course totally opt in, it works alongside normal Koha (or any
other method) of login. So only those choosing to use it, need use it
Test Plan
1/ Make sure OPACBaseURL is set correctly
2/ Switch on the Persona syspref
3/ Make a borrower (or edit one) to have the email you plan to use as
the primary email
4/ Click sign in with email, make or use a persona account
5/ Logout
6/ Check you can still login and logout the normal way
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Comment: Works great.
It's not browser dependent, but tested with chrome, firefox, opera and safari.
Old an new login system works.
Minor errors, addresed in follow-up.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
New syspref OPACPopupAuthorsSearch.
If it is disabled, the development has no effect.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Make charges of type FU be counted for opac-user.pl
Test Plan:
1) Checkout an item to a patron, back date the date due enough to create fines
2) Run fines.pl
3) Log into the patron's account via the OPAC
4) Note the fines line for that issue says 'No'
5) Apply patch
6) Reload opac-user.pl, not the fines column now says 'Yes'
Signed-off-by: David Cook <dcook@prosentient.com.au>
Works great, Kyle. Seeing as my test patron had $4500 in fines for that item, I was glad to see that column switch to "Yes" ;).
I'm not sure what the difference is between FU and F is, or what L means, but the patch works, so I'm signing off.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
This works as described, all tests and QA script are ok.
Note: why show yes and not the fine amount?
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This problem happens because there isn't a operator "phr" in the values
of callnumber and standard number search. So many results aren't the
corrects ones.
Test plan:
- Apply the patch
- In the dropbox search menu of OPAC main page header, the callnum
should have only callnum
- In OPAC advanced search the callnumber and standard number options
shouldn't have "phr"
- In staff client advanced search the callnumber and standard number
options shouldn't have "phr"
- Change OPACNumbersPreferPhrase and IntranetNumbersPreferPhrase to "use"
- The options listed before should use now the operator "phr"
- This will resolve the problems with the searches of callnumbers and
standard numbers in OPAC and staff client (spaces problems, no
results, inconsistent results, etc...)
Sponsored-by: KEEP SOLUTIONS
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
I don't know how to reproduce the searching problems described in the
bug, but I can confirm that the patch works correctly to enable/disable
the use of 'phr' in the searches described in the test plan.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
System preferences work as described, switching indexes in
OPAC and staff.
All tests and QA script pass.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
There is just a small typo where one of the results of a conditional is
"subscription" rather than "subscriptions".
If this comes up, the correct tab (subscriptions) will not be chosen.
I'm not sure what will happen...it'll probably just have the
"holdings", "subscriptions", and "serial collection" tabs all default
to closed with none of them being open.
Test Plan:
The easiest way to test is just to double-check the other strings in the
conditional which say "subscriptions" rather than "subscription".
You can also look at opac-detail.tt where the param is shown, and note
that there is no condition for "subscription" - just "subscriptions".
Any tests other than that would be overly complex for such a trivial
patch.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Previously users would see the same message whether their card was about
to expire or was already expired. This patch adds a new message to
handle cards which are about to expire, following the
NotifyBorrowerDeparture system preference.
TEST PLAN :
The best way to test would to have at the same time :
- a SQL client to change the expiry date of a borrower
- an OPAC session opened for the same patron.
Case 1: expiry date is set in the future
-> no warning
Case 2: expiry date is set in the near future (within the
"NotifyBorrowerDeparture" system preference range)
-> a warning says the card will expire on **date**
Case 3: expiry date is set in the past
-> before patch, same warning as Case 2
-> after patch, new warning indicating that the card has expired
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Added description to the patch and copied test plan from the bug report.
Patch passes test plan.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Adds the following enhanced content to the OPAC, all controlled by
separate sysprefs:
1) A "Readometer" which summarizes reviews on the OPAC detail page
2) A tab with snippets of critical reviews on the OPAC detail page
3) A computed rating on the results page
To test:
Find a book that is listed on IDreamBooks.com (you may have to make
sure that you have the first edition), and one that is not. Try
each of IDreamBooksReadometer, IDreamBooksReviews, and
IDreamBooksResults sysprefs, taking note of the content appearing (or
not) as appropriate.
Updated to add missing CSS to new theme.
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
all tests pass.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Rebased to latest master 2012-12-31
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Having embedded JavaScript read the session cookie directly
is unnecessary and prevents the CGISESSID cookie being marked
httpOnly as a security measure. The only Koha JS attempting
this was the AJAX tags code.
To test:
- In general, verify that there are no regression withs
adding tags in the OPAC or reviewing them in the staff interface.
- In specific, for the OPAC
- log into the OPAC
- retrieve a bib record
- add a tag
- refresh the bib details page to verify that the
tag was added
- make sure the TagsInputOnList syspref is on
- perform a search
- add a tag to more than one record from the search results page
- repeat the preceding using the CCSR theme
- And in the staff interface
- Go to the review tags tool
- Reject a tag
- Refresh to verify that the tag was rejected
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Added RentalsInNoissueCharges and ManInvlsInNoissueCharges sys prefs
Created C4::Members::cwGetMemberAccountBallance()
* A wrapper for GetMemberAccountRecords that gives info on non-issue and
other charges
* Other charges are:
'Res'
'Rent' if RentalsInNoissueCharges is Mo
authorised_values MANUAL_INV if ManInvlsInNoissueCharges is No
C4::Members::GetMemberAccountRecords() changes:
* Dropped input param $date, it is not used
Use split charges in C4::Circulation::CanBookBeIssued() and
C4::Members::patronflags(). That way only fines decide whether an item
can be issued, and not other non-fine charges
Signed-off-by: Marc Veron <veron@veron.ch>
Rebased (updatedatabase.pl)
ManInvInNoissueCharges and RentalsInNoissueCharges ar both included by default (= behaviour as before)
All variants tested: Both included, none included, manual invoice included, rentals included.
Works fine, blocks/does not blok as appropirate, messages appear as expected.
[Oct 12, 2012 marcelr:] Amended for updatedatabase.pl
Signed-off-by: M. de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
- the dateformat value is send to all templates (from
C4::Auth::get_template_and_user)
- remove all assignment of dateformat in all .pl files
- the DHTMLcalendar_dateformat variable is unused
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Fixed conflicts:
- opac/sco/sco-main.pl
- reports/acquisitions_stats.pl
- tools/cleanborrowers.pl
All tests pass, perlcritic problems appeared in some files
before and after these patches were applied.
Checked sorting in following pages:
- acqui/addorderiso2709.tt - list of staged imports in acq
- acqui/histsearch.tt - sorting of dates in acq search result list
- acqui/invoices.tt - billing date in list of invoices in acq
- acqui/lateorders.tt - list of late orders in acq
- acqui/ordered.tt - ordered titles and estimated costs for a fund
- acqui/parcels.tt - receive shipment page
- acqui/spent.tt - received titles and actual costs for a fund
...
- serials-search.tt - subscription search result list
...
- opac/sco/sco-main.tt - due dates in list of checked out items
- reports/acquisitions-stats.tt - date searches, display of dates
- tools/cleanborrowers.tt
- tools.holidays.tt - different views of dates library is closed,
adding dates
Checked dates display according to system preference everywhere and
searching, entering dates etc. still worked as expected.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This patch removes the superflous code related to 'publictype' which
is a key set for item hashes in some perl files. This key is never
used or stored.
Test Plan:
1) Apply patch
2) Test catalogue/detail.pl, opac/opac-detail.pl and opac/opac-user.pl
3) You should not see any changes in behavior
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Add system preferences SCOUserCSS and SCOUserJS to define separate CSS and JavaScript for the Self Checkout Module.
Test plan:
1) Apply patch
2) Run updatedatabase.pl
3) Add something arbitrary to the new sysprefs SCOUserCSS and SCOUserJS ( such as TestCSS and TestJS ).
4) Load the SCO module in a browser, and view the HTML, verify the CSS and JS values in the system preferences have been included.
Signed-off-by: Marc Veron <veron@veron.ch>
I tested with an alert('hello') as JavaScript and some background-color for the CSS. Worked as expected.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Added a system preference to turn on/off this feature.
By default the system allow the patron to place holds even if it is in his possession.
Script to place holds check if the system preference is off and if patron has at least one item to block holds.
Messages to say that are already in patron possession added to templates.
Method to check if patron has one issue from one record added to C4::Circulation
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
1/ It's better to set style of the video marked in a css file.
2/ Replace some
for my $i in (0..#$array)
with
for my $element in (@array)
3/ the routine in a pm returns a hash not the $template variable
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This enhancement uses information from MARC field 856 to generate the appropriate HTML5 code to embed am media player for the file(s) in a tab in the OPAC and staff client detail view. This patch supports the HTML5 <audio> and <video> element. Additionally it gives basic support for the <track> element. This element is not supported very well by recent browsers. Please consider the patch working when you get working video or audio.
Rebased to Master 22.11.2012
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
When search failed, this patch gets the keyword(s) and add them
to the string entered by the user to OPACNoResultFound
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Several changes in this patch, the largest of which is that the
renew/return dialogs no longer require JavaScript in order to properly
alter and submit the form. Instead each button uses a separate form.
To test, log in to self checkout and submit a barcode which is checked
out and can be renewd, and a barcode which is checked out but has
reached the checkout limit. On the resulting dialogs each button
should function properly.
Also changed: I removed some useless JavaScript processing related
to a bogus "valid_session" variable which was unused.
Similarly removed is template logic based on a "timedout" variable which
was not set by the script. Note that the script contains NO server-
side handling of timeout. Timeout is dependent on JavaScript.
To test these changes, confirm that with JavaScript enabled you are
automatically logged out after the time specified in the SelfCheckTimeout
preference.
Other minor changes: Terminology and capitalization corrections,
minor style tweaks.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
The 2 sysprefs are SeparateHoldingsBranch and OpacSeparateHoldingsBranch
and permit to chose between home branch and holding branch.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
If you click on "Browse shelf" under "<mylibrary> holdings", shelf
browser should open under this tab.
If you click on "Browse shelf" under "other holdings" tab, it should
open under "other holdings" tab.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Two tabs: "<branch> holdings" / "Other holdings"
"<branch> holdings" tab contains items whose homebranch is the current branch.
"Other holdings" tab contains all other items.
If current branch is not set (connected with mysql user or not logged in
(opac)), the display is unchanged (1 tab "Holdings")
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Adjusts calling conventions to use hashrefs and eliminate redundant
procedural/OO mixed code.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
- Adding simple style to register link on home page
- Adding unique ids to new pages and to blocks containing
registration links
- Adding better page titles and breadcrumb links to some pages
- Correcting bug which meant incorrect message showed on registration
page when OPACPatronDetails preferences is turned off
- Passing patron details to opac-memberentry.tt so that patron's
name can be displayed in breadcrumbs
- Improving display in staff client of patron record updates
waiting to be approved.
- Adding a sort by name to output of pending patron record updates
- Adding updated JqueryUI library files to include expanded widget
options.
The changes in this patch require the addition of the jQueryUI
Accordion widget. Other pending patches are seeking to add
enough of the other remaining missing widgets that it seems time
to go ahead and add the rest.
Future submissions which add usage of these widgets will have
to be careful to make changes to Koha's CSS where necessary.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Passed-QA-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This development will add the ability for a new patron to register
himself or herself. The self-registration will attempt to match this
newly inputted data to any existing patrons and if any possible matches
are found, ask if the patron is sure he or she doesn't already have an
account at the library. A system preference may be set to prevent patron
self-registration if the system detects the possibility that the person
may already have an account.
Once the patron has registered, passing a captcha (or similar
bot-stopper), the patron will then be optionally verified a second time
via email. At this point, the patron will be able to print a temporary
library card (optional by system preference), and will be provided any
details necessary to access electronic resources (this body of text
would be a template in the slips and notices system). At the library's
choice, this new patron would either be set to a temporary patron status
(patron type set via system preference), or a fully-fledged patron
(allow patron type to be determined by age and/or other attributes).
Assuming the library uses temporary patron types for OPAC registrations,
this patron will next enter a queue and would need to physically enter
the library to verify himself and become a fully-fledged patron (most
likely by bringing in physical proof of address, etc.). The librarian
would look up the patron record and modify the patron type. If a
temporary patron has not been verified within a certain time frame
(defined by a system preference), the patron record will be deleted
from the system via a cron job.
For registered patrons, the system will allow each person to also
update his or her personal data via the OPAC. When a patron updates his
or her information, the changes will be entered into a queue to be
verified by a librarian (preventing a patron from inputting obviously
bogus data). The staff client home page will display the number of
patron records with changes awaiting approval. A librarian would then be
able to click through a list of modification requests, and approve or
deny each (with approval and denial alerts being sent to the patron via
the standard messaging system).
NEW SYSTEM PREFERENCES
* PatronSelfRegistration
* PatronSelfRegistrationDetectDuplicates
* PatronSelfRegistrationVerifyByEmail
* PatronSelfRegistrationPrintTemporaryCard
* PatronSelfRegistrationUseTemporaryStatus
* PatronSelfRegistrationExpireTemporaryAccountsDelay
NEW NOTICE
* Verify by email notice
NEW SLIP
* Temporary card slip
NEW CRON JOB
* delete_expired_opac_registrations.pl
- Deletes patrons that have not been upgraded from the temporary
status within the specified delay
* delete_unverified_opac_registrations.pl
- Deletes the unverified patrons based on the length of time specified
in the PatronSelfRegistrationExpireTemporaryAccountsDelay
The patron will register from self_registration.pl, linked off opac-main.pl if enabled. The registration page will be translatable to other languages in the same way that existing templates are.
Test Plan:
1) Enable PatronSelfRegistration
2) Set PatronSelfRegistrationExpireTemporaryAccountsDelay to a number
of days
3) Create a self-registered borrower category
4) Set PatronSelfRegistrationUseTemporaryStatus
5) Set PatronSelfRegistrationVerifyByEmail to "Don't require"
6) Go to OPAC, log out if logged in.
7) You should see the "Register here" link below the login box
8) Attempt to register yourself
9) Verify you can log in with your temporary password.
10) Set PatronSelfRegistrationVerifyByEmail to "Require"
11) Attempt another self-registration
12) Check the messages table, you should see a new message with a
verification link.
13) Copy and paste the link into a web browser to verify the registration
14) Log in with the given credentials to verify the account was created.
Test Plan - Part 2 - Borrower Modifications
1) Log in to OPAC, go to "my personal details" tab.
2) Make some modifications to your details.
3) Repeat steps 1 and 2 for two more borrowers.
4) Log in to Koha intranet with a user that can modify borrowers.
5) At the bottom of mainpage.pl, you should see:
Patrons requesting modifications: 3
6) Click the link
7) Approve one change, deny a different one, and ignore the third, then
submit.
8) Check the records, you should see the changes take affect on the
approved one, and no changes to the other two. You should also see
"Patrons requesting modifications: 1" at the bottom of mainpage.pl
now.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Bug 7067 - OPAC Borrower Self Registration - Followup
* Rename PatronSelfRegistrationUseTemporaryStatus to PatronSelfRegistrationDefaultCategory
* Hide register link unless PatronSelfRegistrationDefaultCategory is set.
* Add invalid token page
* Add documentation and switches to cron scripts
* Add required fields check for editing exiting patrons
* Don't force require email address for existing patrons when
PatronSelfRegistrationVerifyByEmail is enabled.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Passed-QA-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
To Test:
Sign in to self checkout.
Enter a barcode and click submit.
Click the finish button
You should be prompted with a message asking if you would like a receipt.
If you click OK you should be taken to the page with the receipt.
If you click Cancel you should not see the reciept and you should be logged out.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Added copyright to print slip for SCO
Modified POD and copyright. Also perltidied
updated print slip option to show on the click of the finish button instead of the submit button
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Elliott Davis <elliott@bywatersolutions.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
If a subscription is no longer enough published (or we are not waiting
for a new periodical) we are allowed to close it.
If a subscription is closed, we are not able to receive or generate a
new serial.
On the serial module, we can now
- close a subscriptionn
- reopen a closed subscription
On serial search 2 tabs is displayed (opened and closed subscriptions).
This patch adds:
- a new field subscription.closed in DB
- a new status for serials (8 = stopped)
Test plan:
- search subscriptions
- close a subscription and check that you cannot receive or generate a
new serial
- launch another search and check that the closed serial is into the "closed"
tab.
- You are allowed to reopen a subscription on the subscription detail
page and on the subscription result page. A javascript alert ask you
if are certain to do this operation.
- Check the serial status "stopped" everywhere the status is
displayed (catalogue/detail.pl, serials/claims.pl,
serials/serial-issues-full.pl, serials/serials-collection.pl,
serials/serials-edit.pl, serials/serials-recieve.pl,
serials/subscription-detail.pl and opac-full-serial-issues.pl)
- The report statistics does not include the closed subscriptions if you
don't check the "Include expired subscriptions" checkbox.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 8782: Followup: add some minor modifications
- Show 'closed' information in biblio detail page
- Add a column in serials report table
- Search subscriptions on title words instead of string
- Prevent serials editing when subscription is closed
- Don't change status of "disabled" serials
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 8782 - Close a subscription - Followup - Fix updatedatabase.pl
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
While QAing your patch, I saw you were writting "MarcFlavour", it should have been "marcflavour"
Will work with the UC, but let's be consistent.
This patch fixes another MarcFlavour just a few lines before I spotted by chance
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Currently, the MARC21 667 Nonpublic General Note field is appearing on the opac-authoritiesdetail.pl page.
Since it is a nonpublic note, it makes sense to remove it from this view.
This patch adds in an extra condition that checks authority records for MARC21 667 fields before displaying them in this opac screen.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Does what it says, with no side effects
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
All tests and perlcritic pass.
Tests done:
holds policy vs. circulation rules seemed to make the difference for me,
I am not totally sure why that is, but see no reason to fail this patch as
results are ok.
System preferences
- CircControlBranch = the library the item is from
- ReservesControlBranch = patron's home library
Circulation rules
- Library A - Holds policy: Books can not be put on hold.
- Library B - Holds policy: Books can be put on hold. (no special setting needed)
Catalog data
- A record with an item for library B, itemtype Books.
Test without patch:
1) Patron A (home library A) places a hold in OPAC on an item from library B.
Should be: hold is NOT allowed.
Before patch: hold IS allowed.
After patch: hold is NOT allowed.
OK
2) ReserveControlbranch = item's home library
Patron A (home library A) places a hold in OPAC on an item from library B.
Should be: hold is allowed.
Before patch: hold is allowed.
After patch: hold is allowed.
OK
3) ReservesControlBranch = patron's home library
Circulation rules: Remove hold policy for library B.
Library A: no holds allowed for books using 'Holds allowed (count)' = 0
Library B: 5 holds allowed for books using 'Holds allowed (count)' = 5
Patron A (home library A) places a hold in OPAC on an item from library B.
Should be: hold is NOT allowed
Before patch: hold is NOT allowed
After patch: hold is NOT allowed
OK
4) ReserveControlbranch = item's home library
Should be: hold is allowed
Before patch: hold is allowed
After patch: hold is allowed
OK
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
There was a bunch of tabulations from line 157 and followings
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
The following command show us there is no change:
git show HEAD --ignore-all-space
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Fixes paging in authority result list in OPAC.
All tests pass.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
The OPAC change password template enforces the OpacPasswordChange
preference by preventing the form from appearing. However, the
script doesn't contain any check for OpacPasswordChange so it is
vulnerable to someone submitting data to it by some other means.
This patch adds a check for OpacPasswordChange to the script and
revises the template logic in order to show the right warning
in all circumstances.
To test, turn off OpacPasswordChange and navigate manually to
opac-passwd.pl. You should see a warning that you can't change
your password.
Turn on OpacPasswordChange load the change password page and
save the page to your desktop. Turn off OpacPasswordChange and
submit a password change via the saved page. Without the patch
this would result in a password change. After the patch it
should not.
Signed-off-by: Melia Meggs <melia@test.bywatersolutions.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Confirmed bug and made sure patch fixes it.
Passes all tests and perlcritic.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
In opac-search.pl and search.pl, this patch moves the $lang variable from the end to the begining of the script, and use it as a parameter for getAllLanguages.
In Languages.pm, getAllLanguages function is modified :
- if no parameter is passed to the function, it returns english languages names
- if a $lang parameter conforming to RFC4646 syntax is passed :
-- the function returns languages names translated in $lang if possible
-- if a language name is not translated in $lang in database, the function returns english language name
To test, set your opac and staff interface in english and in other languages and check search.pl and opac-search.pl :
- If language names in your languages_description table are translated in the same language you use for your GUI, the language names in dropdown list will be translated in this language (+native name).
- If your GUI is in english, or in a language into whitch languages names are not translated in languages_description, the dropdown list will stay in english (+native name).
Signed-off-by: Marc Veron <veron@veron.ch>
Patch behaves as expected.
With Opac language set to French I got all languages with French language name.
With German (de-DE), I got only a few with German language names (and all other with English ones),
this was due to missing entries for de-DE in table language_descriptions.
This behaviour is consistent with the description above.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Tested language list in OPAC and staff advanced search is translated
properly after applying the patch. Checked that language switcher still
works like it should.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Fixed typo in POD.
Simplifies template (eliminating opac-bottom include).
Makes encoding for card and html view more consistent with approach in Templates module.
Rearranges a few lines in script for consistency and performance.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Passed-QA-by: Mason James <mtj@kohaaloha.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This script has various encoding problems:
1. parametars from CGI are not encoded in utf-8, so when they are
compared with utf-8 strings from database every field with
utf-8 characters will be reported in e-mail as changed
2. when sending e-mail, wide characters are passed to Mail::Sendmail
which results in software error if edited field has utf-8 characters
(because of first point, this happend if ANY fields has utf-8 chars)
3. when declaring encoding for outgoing e-mail utf-8 is more correct
than just utf8
Test scenario:
1. open opac-userupdate and edit user which has utf-8 characters in
at least one field (firstname and surname are common examples)
2. edit one of other fields and add utf-8 character to it
3. verify that e-mail with changes arrived with just edited field
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
The opac-export.pl script had a number of XSS vulnerabilities relating
to its error handling.
To test:
1) Go to /cgi-bin/koha/opac-export.pl?op=export&bib=2&format=<h2>evil</h2>
(substituting a valid biblionumber for the '2')
2) Notice that "evil" is rendered as an h2 heading.
3) Apply patch.
4) Notice that you now see the h2 tags, and they are not rendered by
the browser.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
could probably also be removed in opac-detail.pl, but it was still here before Jared patch.
So, in case something is still using bib I haven't removed this call
Previously we did not sanitize biblionumber and authids passed in by
the user.
To test:
1) Go to /cgi-bin/koha/opac-detail.pl?biblionumber=2hi (substituting a
valid biblionumber for the 2).
2) Notice the presence of "2hi" on this page, and also on the ISBD and
MARC views.
3) Go to /cgi-bin/koha/opac-authoritiesdetail.pl?authid=2bye
(substituting a valid authid for the 2).
4) Notice the presence of "2bye" on this page.
3) Apply patch.
4) Notice that "2hi" and "2bye" strings are gone.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
This fixes the display of different sized words for differently popular
tags. It is a bit of a refactor of that part of the system, moving
logic to more sensible places (and removing an unused method on the
way.)
Note that it isn't an attempt to reproduce what was there previously,
just to do something similar, and in an easier to change fashion.
Sponsored-By: New Zealand Educational Institute
Signed-off-by: Marc Veron <veron@veron.ch>
Works as expected.
When working with hierarchical subject headings, it is sometimes helpful
to do a search for all records with a specific subject, plus
broader/narrower/related subjects. This patch adds a suggestion plugin for
these "exploded" subject searches to Koha. Note that this patch depends on
both bug 8211 AND bug 8209.
To test (NOTE: this test plan covers both 8211 and 8726):
1) Make sure you have a bunch of hierarchical subjects. I created
geographical subjects for "Arizona," "United States," and "Phoenix,"
and linked them together using 551s, and made sure I had a half
dozen records linking to each (but not all to all three).
2) Do a search for su-br:Arizona (or choose "Subject and broader terms"
on the advanced search screen with "more options" displayed), and
check that you get the records with the subject "Arizona" and the
records with the subject "United States"
3) Do a search for su-na:Arizona (or choose "Subject and narrower terms"
on the advanced search screen with "more options" displayed), and
check that you get the records with the subject "Arizona" and the
records with the subject "Phoenix"
4) Do a search for su-rl:Arizona (or choose "Subject and related terms"
on the advanced search screen with "more options" displayed), and
check that you get the records with the subject "Arizona," the
records with the subject "United States," and the records with the
subject "Phoenix"
5) Ensure that other searches still work (keyword, subject, ccl,
whatever)
6) Use "Did you mean?" page in admin section to enable ExplodedTerms
plugin
7) Do a keyword search on the OPAC, confirm that searching for exploded
terms is suggested.
8) Do a subject search on the OPAC, confirm that searching for exploded
terms is suggested.
9) Do a non-keyword, non-subject search on the OPAC, confirm that
searching for exploded terms is NOT suggested.
10) Disable ExplodedTerms plugin and enable AuthorityFile plugin.
11) Do search on OPAC, confirm suggestions are made from authority file.
12) Sign off
Signed-off-by: wajasu <matted-34813@mypacks.net>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Split into two patches. This patch includes only the functionality.
This commit adds support for displaying authority hierarchies for all
flavours of MARC, not just UNIMARC. Display now uses the jQuery
jstree plugin, selected with the help of Owen Leonard, resulting in a
much faster experience for users.
Be aware that the jstree file uses tabs rather than 4-space indentation,
which I left as-is so as to make it easier to integrate upstream
releases in the future.
To test:
1) Enable the AuthDisplayHierarchy syspref
2) Create authority records with a hierarchy of see also fields
(in MARC21/NORMARC, you'll be using 5xx fields for this, with a
subfield $w=g for broader terms and subfield $w=h for narrower
terms)
3) View the authorities in the OPAC, noting the hierarchical view at
the top of the page.
This initial patch does not create bidirection linkages from
unidirectional links in MARC21 authorities. This means that when moving
up the authority hierarchy, lower levels will disappear. This is
intentional, as the first patch is intended merely to ensure that
AuthDisplayHierarchy functions the same for all marcflavours. A future
patch will add a cron job to generate the bidirectional linkages, once
we are sure that the hierarchy functionality for UNIMARC and
MARC21/NORMARC coexists peaceably.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Resolved conflicts in updatedatabase.pl, sysprefs.sql and in one of
the CSS files.
Test plan:
1) Run t/AuthoritiesMarc.t
New tests complete without any errors.
2) Make sure updatedatabase works correctly.
Update works nicely, new system preference is also added to syspref.sql
3) Make sure new terms are translatable.
Created new po files for de-DE and checked for new terms.
All translations appear correctly.
4) Make sure everything works with AuthDisplayHieararchy OFF
- Add authority
- Edit authority
- Delete authority
5) Test feature with AuthDisplayHieararchy ON
- Add authority
- Edit authority
- Delete authority
6) Add a couple of hierarchically linked authorities
Note: links have to be created in both directions
Example:
151 $aGermany
551 $a Baden-Württemberg $w h
151 $aBaden-Württemberg
551 $a Konstanz $w h
551 $a Germany $w g
151 $aKonstanz
551 $a Baden-Württemberg $w g
551 $a Fürstenberg $w h
551 $a Paradies $w h
151 $a Fürstenberg
551 $a Konstanz $w g
151 $a Paradies
551 $a Konstanz $w g
Tree shows up nicely above the authority record
- in staff
- in OPAC
- on the normal view tab
- on the MARC view tab
7) Checking the logs for warnings
- no Javascript errors or warnings
- no warnings or errors in log files
This patch enables the shelving location facet as an
alternative to the branches fact in two situations:
A) SingleBranchMode is enabled
B) There is only one branch in the branches table
Test Plan:
1) Catalog multiple items with different shelving locations.
2) Test enable by enabling SingleBranchMode
3) Test enable by deleting all but one branch
Based on initial patch by Ian Walls.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Tested cases 2) and 3) successfully in OPAC and staff client
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
This should make saved reports more manageable.
Group/Subgroup hierarchy is stored in authorised_values,
categories REPORT_GROUP and REPORT_SUBGROUP, connected by
REPORT_SUBGROUP.lib_opac -> REPORT_GROUP.authorised_value
Database changes:
* authorised_values: expanded category to 16 chars
* created default set of REPORT_GROUP authorised values to match
hardcoded report areas
* reports_dictionary: replaced area int with report_area text, converted
values
* saved_sql: added report_area, report_group and report_subgroup;
report_area is not currently used, saved for the record
C4/Reports/Guided.pm:
* Replaced Area numeric values with the mnemonic codes
* get_report_areas(): returns hardcoded areas list
* created get_report_areas(): returns full hierarchy (groups with belonging
subgroups)
* save_report(): changed iterface, accepts fields hashref as input
* update_sql(): changed iterface, accepts id and fields hashref as input
* get_saved_reports():]
- join to authorised_values to pick group and subgroup name
- accept group and subgroup filter params
* get_saved_report():
- changed iterface, return record hashref
- join to authorised_values to pick group and subgroup name
* build_authorised_value_list(): new sub, moved code from
reports/guided_reports.pl
* Updated interfaces in:
cronjobs/runreport.pl, svc/report, opac/svc/report: get_saved_report()
reports/dictionary.pl: get_report_areas()
reports/guided_reports.pl
reports/guided_reports_start.tt:
* Reports list:
- added group/subgroup filter
- display area/group/subgroup for the reports
* Create report wizard:
- carry area to the end
- select group and subgroup when saving the report; group defaults to area,
useful when report groups match areas
* Update report and Create from SQL: added group/subgroup
* Amended reports/guided_reports.pl accordingly
Conflicts:
C4/Reports/Guided.pm
admin/authorised_values.pl
installer/data/mysql/kohastructure.sql
installer/data/mysql/updatedatabase.pl
koha-tmpl/intranet-tmpl/prog/en/modules/reports/dictionary.tmpl
koha-tmpl/intranet-tmpl/prog/en/modules/reports/guided_reports_start.tmpl
misc/cronjobs/runreport.pl
reports/dictionary.pl
reports/guided_reports.pl
Signed-off-by: Delaye Stephane <stephane.delaye@biblibre.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
This change some code a bit strange, that generate strange effetcs.
Now we use $cgi->param to get the values.
Test: search at the opac and intranet using limit, etc.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This patch adds a new column containing the itemcallnumber value into
the serial collection tab (opac detail).
930$a for UNIMARC
852$h for others
Signed-off-by: Stephane Delaye <stephane.delaye@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
(Added Stephane Delaye's sign off at the same time as mine)
As this view has never worked with MARC21, I am comfortable signing
off on the fact that the patch does not in any way impact the MARC21
display.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
The check that the max number of reserves has
not been reached needs to take account of the fact
that we may have added enouch reserves to
reach the limit while this script is running.
Add a check against the incrementing count
The variable canreserve was only used when looping
through multiple holds but was not being
reinitialized on every iteration
make variable local to loop it is used in and
initialize to zero
Have used perltidy to correct the indention of
the while loop as it was misleading to the reader
Some numeric comparisons were using a string operator
fix them before strange bugs manifest themselves
The loophole manifests thus:
borrowers are only allowed Y holds.
If holds are done individually, it is
obeying that law i.e. X has held Y separate books –
when I tried to do a 6th
book it told me that I could not place a hold.
However, if a borrower checks the catalogue,
gets the intial list up and clicks items on the “results”
box and then clicks “place hold” they can hold more than Y
items Please enter the commit message for your changes. Lines starting
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
GetAllIssues can produce large lists
For performance purposes:
Dont loop over the list without cause
Dont do expensive processing in the loop
Dont needlessly copy the array
Do display formatting in the template
Dont extract the barcode list unless we are producing it
Reduce db calls by using the data to hand
Make the table in the template a bit more readable
where everything was stuffed into one line
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
One of the ideas behind authority records is that users who search for
one term should have related terms (according to the authority file)
suggested to them. At the moment, Koha doesn't do that. Adding an
authority searching step to regular searches and displaying any
suggestions in a "Did you mean" bar at the top of the results would be
very useful.
This commit adds a Koha::SuggestionEngine class which is in charge of
getting suggestions from individual suggestion engine plugins, which
much be in the Koha::SuggestionEngine::Plugin::* namespace, and extend
Koha::SuggestionEngine::Base. Suggestions are loaded asynchronously
using AJAX, and a link to a page with suggestions is provided for users
with Javascript turned off.
The AuthorityFile suggestion engine plugin looks up the specified search
terms in the authority file and then suggests searches for records using
matching authorities.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Rebased 2 August 2012 and incorporated QA feedback
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Test plan:
- Verified database update added system preference correctly,
pref defaults to OFF
- Verified search results and detail pages in OPAC and staff
still worked the same as before
* for no results
* with results
- Activated system preference and tested various searches
* Searches from simple search
* Searches from advanced search
* Search links in records
- Deactivated Javascript - verified fallback works correctly
Notes:
- Suggested terms can include autorities with no linked records.
- When combining more than one search option using advanced search
this results in "no suggestions" more often. Feature works best
from simple search.
Overall great feature making use of authorities in a user friendly way!
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Rebased on latest master 2012-09-10
Signed-off-by: wajasu <matted-34813@mypacks.net>
Adds a dropdown to allow the user to choose to search the 'mainentry,'
and 'match-heading'indexes, in addition to the 'any' index which is
the default.
To test (you will need authority records with see-from and
see-also headings):
1. Go to the browse subjects and authors section in the OPAC
2. Do a search for a fairly generic term that is used as a
see-also term in a lot of records. Note that your search
results include both the record that you wanted and all
the other records that refer to it.
3. Apply the patch.
4. Repeat the search from step 2. Notice there is no change
to the results.
5. Repeat the search from step 2, but choose "in main entry"
and observe that you are now only seeing authority records
with the search entered in their main entry.
6. Repeat the search from step 2, but choose "in any heading"
and observe that the results are the same as in step 2. This
is intentional, so that in the future notes in authorities
can be made searchable.
7. Search for an obsolete form of heading with the "in keyword"
option selected. Notice what results you get.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works nicely. Hiding the new options can be done with CSS:
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
This patch does the following:
1) Enables fallback for includes between different themes and different
languages (with the exact same precedence as for .tt files)
2) Enable fallback for XSLT files between different themes and different
languages (again, same precedence)
3) Change the semantics of the TT [% themelang %] variable so that it always
refers to the preferred theme and language, rather than the fallback
theme/language. As a result, all themes must include all javascript,
css and image resources they use.
Note that these changes actually have no impact whatsoever on an
installation where the default (prog) themes are in use.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Mason James <mtj@kohaaloha.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
This patch re-uses code and markup from opac-user.tt & .pl
to place the contents of the opacmysummaryhtml preference
on the circulation history page in exactly the same way
it appears on the "my summary" page.
The wording of the system preference description has
been modified to reflect this addition.
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
Works as advertised.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
This enhancement extends the OpacSuppression feature with an optional IP address range within which results are _not_ suppressed.
To test
* turn on OpacSuppression (Administration->System preferences->Cataloging) and enter an IP address range in the OpacSuppressionByIPRange field.
* set at least one bibliographic record to suppress=1 (enter '1' in 942$n)
* fully reindex your data
* do an OPAC search that should bring up your suppressed record
* try with IP ranges that match your IP and ranges that don't
Signed-off-by: Marc Veron <veron@veron.ch>
Tested following the scenario above. Works as expected.
After doing a search and going to the details page, it can sometimes
be difficult to see exactly *why* a record was returned by a search.
By highlighting matches on the detail page as well as the results
page, we make it much easier to figure that out.
This patch uses a query_desc CGI parameter which is inserted into links
from the results page with javascript. This serves to avoid the
potential privacy implications of a cookie, and ensures that users
without javascript enabled see no change whatsoever.
To test:
1) Do a search (or two) in the OPAC with OpacHighlightedWords on.
2) View a record or two of the results, and ensure that the correct
words are highlighted.
3) Disable OpacHighlightedWords and do another search (or two),
this time ensuring that no words are highlighted.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Calculation of rank was being skipped based on display
option but it is used in calculating the rank passed
to AddReserve resulting in reserves being created with
null priorities causing them to be skipped in subsequent
processing
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
When using quoted-printable data needs to be encoded accordingly.
Content-Transfer-Encoding: quoted-printable
Without the patch = in URLs or data will be interpreted as the beginning
of a special character resulting in broken URLs.
To test:
- Check diacritics in records display correctly
- Check various URLs with = to make sure they all work correctly
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This is only a partial fix, as the subject line is not encoded,
but it is a huge improvement over what it was before.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
This patch removes the AmazonReviews and AmazonSimilarItems
features from the OPAC and staff client. With on Amazon
feature remaining, cover images, the *AmazonEnabled preference
is also removed in favor of checking the *AmazonCoverImages
preference. Two other system preferences, AWSAccessKeyID and
AWSPrivateKey are removed as they were required only by the
removed features.
Handling of book cover images from Amazon is unchanged.
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
Turned on amazon covers in opac and staff client and all
worked as expected. Then tested to make sure other cover image
services still worked and they do.
Signing off.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Prior to this patch, attempting to view an invalid authority in the
OPAC gave a system error instead of a 404. With this patch, the user
will just get a 404, as is the case with invalid bibs.
To test:
1) Try to view an invalid authority by going to:
/cgi-bin/koha/opac-authoritiesdetail.pl?authid=999999999999
(presuming that you don't have an authority with authid 999999999999
in your database) before and after applying this patch
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
If OpacRenewalAllowed is set to "Don't allow" and OPACFineNoRenewals is set to blank ( i.e. disabled ).
A user who owes any fines, when logged in to the OPAC will receive the following message:
Please note: You have more than 0.00 in fines.
This is a rather odd message, and is not very sensible. The message should either be modified or removed altogether.
This patch modifies the message to the following:
Please note: You currently owe $fines in fines
where $fines in the formatted amount the borrower currently owes
in fines.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
If the patron has depts that prevent issuing and the system preference 'AllowFineOverride' is set to 'allow', the amount is not displayed in the user message.
Additionally, patch adds currency symbol to amount.
Test plan:
Do self checkout with patron who has debts that are over the limit.
Test with and without preference 'AllowFineOverride' set.
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Up until now, the only authority view in the OPAC was a
rather-unfriendly expanded MARC view. This patch adds a user-friendly
view similar to the biblio details view.
Specific features to be aware of:
* Right-to-left text in the MARC21 880 field will show up in the
appropriate location with the appropriate alignment and wrapping
* There is very little CSS styling. Any suggestions for how to make
the display more attractive would be gratefully received.
To test:
1) Do a search for an authority in the OPAC.
2) Choose an authority record to view.
3) Observe that the view is more user-friendly and polished.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works very nicely now. The old view is still available, but the
user is presented with a nicer non-MARC view first.
The dependency is not used in opac-sendbasket. But there is a require of HTML::FormatText in the code of Template::Plugin::HTMLToText.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Due to renaming of some variables the limits were only working for 'anonymous'
users. This patch fixes some variables, so limits are also added to history
when the user is logged in.
Signed-off-by: Alex Arnaud <alex.arnaud@biblibre.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Fix also freezing for some browser when performing a search query.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Checked paging (previous, next and navigating to page numbers) works.
Browser performance is fixed too.
Adds the ability to pass a hash to C4::Reports::Guided::get_saved_report
which specifies a name or id to select the report.
Test plan:
1. Create a report (or choose an existing one), and mark it public
2. Run the report using the web service: [IntranetBaseURL]/cgi-bin/koha/svc/report?id=whatever
3. Confirm you get the expected results
4. Run the report by name using the web service: [IntranetBaseURL]/cgi-bin/koha/svc/report?name=[Report name] (keep spaces in the name)
5. Confirm you get the same results
6. Run the report using the public web service: [OPACBaseURL]/cgi-bin/koha/svc/report?id=whatever
7. Confirm you get the same results
8. Run the report by name using the public web service: [OPACBaseURL]/cgi-bin/koha/svc/report?name=[Report name] (keep spaces in the name)
9. Confirm you get the same results
10. Sign off
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
- Adding, editing and deleting reports works
- id parameter works
- new name parameter works
- public and non-public works
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Fixed a conflict in updatedatabase and removed kohaversion.pl from the patch.
Patch works nicely, tested with different searches and limits.
Note: Sort options don't get into the history still.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
In order to prevent spamming using sendbasket.pl, some counter-measure are done:
- permit send basket only for authenticated user
- permit send basket only if basket contains items
- use username & email for 'Reply-To' field (with fallback to KohaAdminEmailAddress)
- add field X-Orig-IP with IP of sender
- add field X-Abuse-Report with KohaAdminEmailAddress
Note: we don't use forged 'To' address with patron email in order to
prevent be marked as spam (by SPF for example).
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Rather than list authorities that are not actually used by a library,
this commit introduces a new syspref: OPACShowUnusedAuthorities to
enable libraries to hide unused authorities in the OPAC authority browser.
To test:
1) Do a search in the OPAC authority browser that brings up multiple
results, including some that are used in the bibliographic database
and some that are not.
2) Observe that the results include both used and unused authorities.
3) Set OPACShowUnusedAuthorities to "Do not."
4) Repeat the same search as in step 1.
5) Observe that the results no longer include unused authorities.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Preference is implemented cleanly and works like advertised.
As a note: The unused authority records will be hidden from display,
but the result list paging does not adjust for the hidden records.
So the result pages will show more or less records total, depending
on how many records are hidden.
At the moment, local cover images cannot be cached by the web browser
or any intermediate reverse proxies. This results in an unnecessary
load on the server, and is entirely unnecessary.
Signed-off-by: Dobrica Pavlinusic <dpavlin@rot13.org>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
The biblio/items detail pages (staff and OPAC) display
the copynumber description if an authorized value
is configured accordingly.
Signed-off-by: Gaetan Boisson <gaetan.boisson@biblibre.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
This is for MARC 21 only.
Made following changed:
- In getFacets in C4/Koha.pm added item type facet for 952y and 942c
- In getRecords in C4:Search.pm added code to get description of itemtype codes
- facets.inc in both staff and opac to show item types related label in the facets block
To test:
Add records such that a certain itype (say BK) is present in both 942c and 952y in two DIFFERENT records.
Run a search where both test records are present. Test to see if itype types are presented in the facets block (both OPAC and staff).
Click on the itype (say BK), both the test records should appear in the refined results. This shows that the feature works for both 942c and 952y.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Ian Walls <koha.sekjal@gmail.com>
QA Comment: fixed capitalization in template includes according to HTML4 coding
guideline ("Item types" instead of "ItemTypes")
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Rebased to current master, works in my tests, but needs another set of eyes.
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
In preparation for some later work on authorities, the filename for the
OPAC authority viewer changed.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
The HTML for authority search results was previously generated in
C4::AuthoritiesMarc::BuildSummary, which meant that it couldn't be
translated. This patch moves the HTML generation into the templates
by introducing a new authorities-search-results.inc include file for
both the OPAC and the Intranet which contains a Template::Toolkit BLOCK
for rendering the authority results. Fixes the authority autocomplete
by removing the untranslatable strings, and returning only data from
the database.
To test:
1. Apply patch.
2. Test authority searching in the authority module in the staff client
3. Test authority searching in the authority control plugin in the
cataloguing module (and the plugin for UNIMARC field 210$c, if you
can figure out how)
4. Test authority searching in the OPAC
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Tested with MARC21 data.
1) Applies cleanly on current HEAD.
2) Authority search in staff
Patch works wonderfully, only some small notes found while testing that have
not been changed by this patch:
ENH note: Search terms show up nowhere. So if I want to change the sorting, I have to
repeat typing in my search term. Even if the form does not keep the term, it
should be visible somewhere on the screen what I searched for.
ENH note: The pagination on top and at the bottom of the result list are formatted
differently. Maybe some missing CSS?
ENH note: Also the authority type is not shown at all in the result list.
3) Cataloguing and authority plugins
The autocomplete function works nicely.
ENH note: There is only one small enhancement
I could imagine. If I start my search from 100 it will limit the search to
'persons' but the autocomplete will also suggest other authorities. It would
be a bit cleaner, if the autocomplete could limit by the appropriate authority
type too. Very nice feature.
Plugins overall work nicely. Created links include the authority numbers and work
correctly.
4) Authority search in OPAC
Works nicely. Display is consistent, but translatability greatly improved.
ENH note: In staff we use 'Details' in OPAC we use 'View full heading' - I wonder
if maybe 'details' would be better understandable for users?
Note: Code reveals a system preference 'AuthDisplayHierarchy' that is
not available in the system preference editor. I talked to Jared and he
will work on this feature later on. For now it's no regression, as the
preference has never been visible.
Added Item availability status to cart(Location table cell).
Changes:
-opac/opac-basket.pl:
Added code to show In transmit status and modified @items to call "GetItemsInfo" instead of "GetItemsLocationInfo" to get accurate avalibility status.
-koha-tmpl/opac-tmpl/prog/en/modules/opac-basket.tt:
Added code for showing availibility staus in opac-basket page and in "More details" link.
Test Cases:
-Add records to your cart with different cases like 1 record with different Item status(Lost,Avaliable,Withdrawn,etc).
-Click on your cart and see the results in a new window.
-Click on "More details" link and check the results.
Signed-off-by: Michael Davis <m.r.davis@cranfield.ac.uk>
Implements support for Talking Tech I-tiva phone notification for OVERDUE, PREDUE and HOLD notifications.
Overdues respect triggers as configured for the patron's branch.
Predue and Holds notifications respect patron's messaging preference choices.
A new column for phone notification is added if the TalkingTechItivaPhoneNotification system preference is turned on
Record of phone messages being sent to patrons is added to the patron's Notices
tab; notice of success or failure can be retrieved from I-tiva.
See the TalkingTech.README for installation and set-up instructions.
Aside from the control system preference, and the necessary changes to Messaging Preferences
forms to make use of phone notifications, the bulk of the code resides in external
cronjobs.
TalkingTech_itiva_outbound.pl generates the Spec C file to send to I-tiva. Actual transmission
of the file must be handled by the system administrator.
TalkingTech_itiva_inbound.pl processes the received Results file from I-tiva. Getting the
file from I-tiva to Koha is the job of the system administrator, as well.
Both scripts have a --help option with full documentation.
The only necessary change to core Koha behavior is in C4::Letters::EnqueueLetter. The return
value was changed from 0 or 1 (successful addition of letter to message_queue or not), to the actual
insert ID of the letter. This was required by the outbound script to present a unique Transaction ID
for the notice added to the patron's record (so a 'sent' or 'failed' status could be updated). Since
the dbh and sth are not shared, and the last_insert_id() command is table-specific, this should be thread-safe.
No changes are necessary to any parts of Koha, as all usage of EnqueueLetter currently ignores the return value.
To Test:
1. Turn on TalkingTechItivaPhoneNotification system preference
2. Verify that 'phone' is now a valid notification option for patrons on both staff and OPAC side
3. Attempt to set a 'phone' preference for PREDUE or HOLD messaging; attempt should succeed
4. Set up the patron for notices to triggers:
a. include checked out items due in a range of days, including the value set up in their messaging preferences.
b. place several holds, some in position, others waiting for pickup, others in transit.
c. set the patron up to have overdues, overdue by a range of days that includes the delay values for
the patrons branch and categorycode
5. Run TalkingTech_itiva_outbound.pl --type=RESERVE --type=PREOVERDUE --type=OVERDUE --outfile=/tmp/talkingtechtest.csv
The resulting talkingtechtest.csv file should include all the items due on X days (where X is the patrons' preference),
and none of the ones due in other increments. Similarly, overdues messages should be added for each item due by a delay
value as configured; overdues of other numbers of days should be ignore. Holds that are waiting pick up or in transit should
have messages, those still pending should not.
Messages should be added to the patron's notices tab for each issue sent. Verify these messages exist, and all Notices
tokens are replaced with appropriate information.
Repeat, this time with 4c making use of the default branch overdue triggers, instead of branch-specific triggers.
To test the inbound script, create a CSV with rows in the format "<<Message_id>>","<<SUCCESS or FAIL>>"
Message ID should correspond to the final column of the talkingtechtest.csv file (the transaction id) for the message.
Primary Authorship: Ian Walls
Additional modifications: Kyle M Hall
http://bugs.koha-community.org/show_bug.cgi?id=4246
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
Tested and in use in production by two public libraries : Middletown
and Washoe. Both have given their sign off, but don't have git to
actually sign off.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
1 more to go... :)
opac/changelanguage.pl: Code before strictures are enabled at line 24, column 1.
See page 429 of PBP. (Severity: 5)
Note: Rebased on master 06/09/2012 by jcamins
Signed-off-by: Joy Nelson <joy@bywatersolutions.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Try to delete cookies and paste the url to opac-topissues.pl.
Without the patch we have a Software error.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Fix basket email sent from OPAC. The email body is now generated HTML
(to be translatable), and converted into TEXT before beeing sent by
email.
To test that it works in other language than English, you have to update
your language .po file:
perl translate update de-DE
Then, translated strings coming from opac-sendbasket.tt, and install the
translation:
perl translate install de-DE
New dependency: Template::Plugin::HtmlToText
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
- in various acquisition pages and serials home
- in database : biblioitems.ean
- adds ean and its mapping in default english bibliographic framework
- adds ean mapping in default french bibliographic framework
- ean search is not enabled for MARC21
The required mapping between the ean marc field and the biblioitems.ean
database field will be automatically added on an existing unimarc installation.
However, if you already have records with ean, you will have to
run misc/batchRebuildBiblioTables.pl to populate biblioitems.ean
Signed-off-by: jmbroust <jean-manuel.broust@univ-lyon2.fr>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Passed QA at second run. Removed a merge marker only.
New syspref is Choice, options being:
- None
- Priority only
- Holds number only
- Holds number and priority
Show holds count on OPAC detail
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
This feature will add the option of displaying a select quote
for the day on the OPAC homepage. It will include the addition
of a QOTD editor in the tools section of the staff interface
which will allow the addition, editing, and deletion of quotes.
A single system preference will enable/disable the display of
the QOTD on the OPAC homepage. A new granular permission will
also be added to conrol user access to the QOTD editor tool.
Possible extentions to this would be code to allow alternate
quote selection algorithms to be added to vary how the currently
displayed quote is selected from the table of quotes.
This patch is a squash of the following work:
--Adding quotes table to kohastructure.sql and updatedatabase.pl
Note: This patch is intended for a MySQL based installation only.
That means that it includes backticks because that is what is required
at this point in history to install Koha correctly on a MySQL based
installation.
Feel free to port this over to the Pg stuff in the data/Pg directory.
--Adding system preference to control display of QOTD on OPAC main page
--Adding sample quote data
These quotes are taken from various US presidents. I'm not sure these
are applicable to the rest of the world, so I'm leaving it to translators
and others to add sample quote data for other languages.
--Adding edit_quotes user permissions
--Squash with other db related patches in this series
--Adding quotes editor pages to tools
--Adding QOTD editor link to tools homepage
--Integration of DataTables into QOTD Editor
--Impleminting jEditable into the quote editor
--Adding delete and add option to editor
--Fixing OPAC display so the QOTD div does not show if no quote is returned
--Also removing useless code from tools/quotes.pl
--Adding spans around QOTD foo in opac-main.tt
--Also fixing quote selection logic to accomodate the possibility of
a single quote in the db a litte better.
--Changing timestamp column header to a more user-friendly 'Last Displayed'
--Fixing bug in quote selection logic. This bug caused a situation where
when the table had only a single quote with an id greater than 1 in it,
no quote would be selected.
--Fixing up sorting in the quote editor table. --jcamins
--Adding span element to quote separator --jcamins
--Overriding the default empty table message supplied by datatables-strings.inc
--Adds missing page heading
--Adds beginning of click-for-help elements.
--Refactors delete functionality to allow selecting of quotes to delete,
enabling multi-delete.
--Refactors saving added quote functionality so that striking <Enter>
saves the new quote.
--Refactors canceling aded quote functionality so that striking <Esc>
cancels the new quote.
--Removing debug console.log statements
--Implementng the YUI button widget/toolbar used on other pages.
--Adds a 5px radius to all YUI buttons to bring them into
conformity with the general trend toward rounded corners
--Fixes capitalization in quote editor
--Implements improvements suggested by jcamins and oleonard
--Adds DataTables Plugin dataTables.fnReloadAjax.js
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Signed-off-by: Mason James <mtj@kohaaloha.com>
Patch resolves incorrect call to GetShelf in opac and staff. It was and is harmless, because the singlecategory variable was not really used (the category$x param was ignored in the template). Just a cleanup operation.
signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Removed two unused calls. Initialized $output in downloadshelf. Corrected some confusing indentation in downloadhself too.
signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
