Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch implements the code to allow a patron to receive multiple
orders at the same time in /cgi-bin/koha/acqui/orderreceive.pl page
To test:
1. apply all patches
2. updatedatabase
3. Go to system preferences and allow AcqReceiveMultipleOrderLines
4. In acquisitions module, create a vendor if you don't have one and add
3 baskets.. one with create items on ordering, one with create items
on receiving and finally one with create items when cataloguing
5. Fill baskets with orders (There should be at least 15 orders in total). There should be a mix of orders created by suggestions, others by subscriptions and others by neither of those methods.
6. Close all baskets and receive shipment.
CHECK => in /cgi-bin/koha/acqui/parcel.pl page, in top table there is a column with checkboxes, and a button that says "Receive selected"
7. If all orders from all baskets are shown in the table, set the rows per page to 10, so table has more than one page
8. Check some of the checkboxes
CHECK => "Receive selected" button shows how many rows are selected
9. Go to the next page and select some more rows
CHECK => Changing page does not modify how many rows where selected
10. Go back to previous page
CHECK => Previously selected rows are still selected
11. Reload the page to deselect all rows
12. Select only one row and click on "Receive selected" button
CHECK => the page /cgi-bin/koha/acqui/orderreceive.pl behaves just the same as if the "receive" link in the selected row would have been clicked.
13. Click on cancel to go back to parcel.pl page
14. Select all rows (even the ones from the next page of the table) and
click on "Receive selected"
CHECH => In orderreceive.pl page there is a table with all selected rows
15. Ensure table has more than one page, as in step 7
16. Click on the "edit" link in the last row of the current page
CHECK => A modal window is displayed with 4 tabs within: Info,
Accounting, Receipt history and Items
CHECK => Modal has 4 buttons at the bottom, 'Previous' to go to previos
order, 'Cancel' to close the modal without keeping modifications, 'Save'
to close modal keeping modifications and 'Next' to go to the next order
CHECK => Even that we are at the end of the current page, 'Next' button
is still available
17. Click on 'Next' button
CHECK => The table behind the modal now displays the next page, and the modal was not closed
18. Click on 'Previous'
CHECK => The table behind the modal went back to the first page, and the modal was not closed
19. Click on 'Previous' button till you reach the first row of the first
page
CHECK => Only when you reach the first row of the first page 'Previous'
button gets disabled
20. Click on 'Next' button till you reach the last row of the last page
CHECK => Only when you reach the last button of the last page 'Next'
button gets disabled
21. Check that behaviour for the different types of order are still the
same
a. For orders that where created through suggestion, check that the
suggestion info is present in Info tab. If when suggestion was accepted
you set a reason, a dropdown to change the reason shoul display also.
b. For orders that where created through subscriptions, check that
the Items tab is disabled, and the Receipt history is enabled. On
accounting tab you should be able to change quantity ordered. If there
were less items received than ordered, the next time you receive this
order the child order generated from this one shoul appear in receipt
history.
c. For orders that don't come from subscription and creates there items on ordering, Receipt history
should be disabled, and a table with prefilled items shold appear in the
Items tab. You can edit them and the changes should appear in the item's
row.
d. For orders that don't come from subscription and creates there
items on receiving, Receipt history should be disabled, and a form to
create the items should appear in Items tab. When you add an item a
table should appear.
e. For orders that don't come from subscription and creates there
ites on cataloguing, Receipt history and Items tabs should be disabled.
f. Any changes made in quantity (received or ordered) or funds in the modal should be
reflected in the table if you click save from the modal.
22. Once you've done all you checking and verifications click save
23. While saving a progress bar should appear
24. If no error was detected, you should be redirected back to parcel.pl
page
25. If an error or warning was detected (like there is an order with 0
items to receive) the save button should be disabled and warnings
are dispayed.
26. prove t/db_dependent/Koha/Acquisition/Fund.t t/db_dependent/Koha/Acquisitoin/Order.t t/db_dependent/Koha/Item.t
Sponsored-by: Virginia Polytechnic Institute and State University
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Laura Escamilla <laura.escamilla@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch corrects a typo in the output of
search_for_data_inconsistencies.pl when a bibliographic record has no
title.
The patch also replaces biblio to bibliographic record in the same
sentence for terminology consistency.
To test:
- Have a bibliographic record without a title
- Run misc/maintenance/search_for_data_inconsistencies.pl
- Read output, make sure the sentence is correct
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
We removed the 'scoped' attribute and so the style rules added in the
previous patch were applied to the agreement list view.
Why is 'scoped' not working is the main question here (?) but adding a
more specific selector to aim only the component (AgreementsList) from
the modal is a quick solution.
Signed-off-by: Pedro Amorim <pedro.amorim@ptfs-europe.com>
Bug 33491: Add a more specific class for the modal
We don't want to apply these CSS rules to other modals
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To test:
1 - Enable UseBranchTransferLimits by item type
2 - Set some limits for book
3 - Place a hold, verify that pikcup dropdown reflects the limits before and after patch
Signed-off-by: Bob Bennhoff <bbennhoff@clicweb.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Just send the codes and descriptions only to client.
Adding a few comments to the reduce construction.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The "MARC overlay rules" page doesn't display or work correctly
if a patron category code contains a "-".
This happens because of the JavaScript function in
"marc-overlay-rules.tt" line 469. This causes an error
"Uncaught SyntaxError: missing : after property id".
Test plan:
1. Go to Administration > Patron categories.
2. Make sure you don't have a patron category code that contains
a "-".
3. Go to Administration > Record overlay rules.
4. The table should display correctly, and you can add, edit
and delete rules.
5. Return to Patron categories.
6. Add a new patron category with a "-" in the patron category code.
7. Return to Record overlay rules page:
=> The page doesn't display and load correctly (see the attached
image) - the normal DataTables header and footer aren't
displayed, and you can't add, edit or delete overlay rules.
=> If you turn on web developer tools, an error is displayed in the
console: "Uncaught SyntaxError: missing : after property id".
8. Apply the patch.
9. Repeat the step 7, the Record overlay rules page should now
display correctly and you should be able to add, edit and
delete rules.
10. Sign off.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds indices to the borrowers table to match the default
search fields for patrons.
To test:
1 - Apply patch
2 - Update database
3 - Ensure patron searching works as before
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch stores the output from ->check_recall() (a Koha::Recall
object or undef) and reuses afterwards, on a ternaty operator.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch uses the patron category of the patron who requested the most
relevant recall to check for more specific circulation rules relating to
recalls. This ensures that patrons who are allowed to place recalls are
able to fill their recalls, especially when recalls are not generally
available for all patron categories.
To test:
1) Go to Administration -> System preferences and enable UseRecalls
2) Go to Administration -> Circulation and fines rules and set a general
All/All rule and a Category A/Itemtype A rule. All values can be set
however you like except for these recalls rules:
All/All rule:
Recalls allowed: 0
Recalls per record: 0
On shelf recalls allowed: if any unavailable
Category A/Itemtype A rule:
Recalls allowed: 5
Recalls per record: 5
On shelf recalls allowed: if any unavailable
3) Find an item of Itemtype A. Check it out to Patron A (any category).
4) Log into the OPAC as Patron B (of Category A). Find the item and
place a recall on the item.
5) Back in the staff interface, check in the item. This should trigger
the recalls process so you can allocate the item to Patron B's recall,
however the pop-up box to confirm the recall does not show. This is the
bug.
6) Apply the patch and restart services
7) Check in the item again. Confirm the pop-up box to confirm the recall
shows and you are able to allocate the item to Patron B's recall.
8) Confirm tests pass t/db_dependent/Koha/Item.t
Sponsored-by: Auckland University of Technology
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Andrew Fuerste-Henry <andrewfh@dubcolib.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Ann Flournoy <aflournoy@cityofkeller.com>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Andrew Fuerste-Henry <andrewfh@dubcolib.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Ann Flournoy <aflournoy@cityofkeller.com>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Andrew Fuerste-Henry <andrewfh@dubcolib.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Andrew Fuerste-Henry <andrewfh@dubcolib.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To test:
1) Run the following test and make sure all pass:
t/db_dependent/api/v1/biblios.t
t/db_dependent/api/v1/checkouts.t
t/db_dependent/api/v1/return_claims.t
t/db_dependent/Circulation/CalcDateDue.t
t/db_dependent/Circulation/CheckIfIssuedToPatron.t
t/db_dependent/Circulation/dateexpiry.t
t/db_dependent/Circulation/GetPendingOnSiteCheckouts.t
t/db_dependent/Circulation/GetTopIssues.t
t/db_dependent/Circulation_holdsqueue.t
t/db_dependent/Circulation/IsItemIssued.t
t/db_dependent/Circulation/issue.t
t/db_dependent/Circulation/MarkIssueReturned.t
t/db_dependent/Circulation/maxsuspensiondays.t
t/db_dependent/Circulation/ReturnClaims.t
t/db_dependent/Circulation/Returns.t
t/db_dependent/Circulation/SwitchOnSiteCheckouts.t
t/db_dependent/Circulation.t
t/db_dependent/Circulation/TooMany.t
t/db_dependent/Circulation/transferbook.t
t/db_dependent/DecreaseLoanHighHolds.t
t/db_dependent/Holds/DisallowHoldIfItemsAvailable.t
t/db_dependent/HoldsQueue.t
t/db_dependent/Holds/RevertWaitingStatus.t
t/db_dependent/Illrequests.t
t/db_dependent/ILSDI_Services.t
t/db_dependent/Items.t
t/db_dependent/Koha/Account/Line.t
t/db_dependent/Koha/Acquisition/Order.t
t/db_dependent/Koha/Biblio.t
t/db_dependent/Koha/Holds.t
t/db_dependent/Koha/Items.t
t/db_dependent/Koha/Item.t
t/db_dependent/Koha/Object.t
t/db_dependent/Koha/Patrons.t
t/db_dependent/Koha/Plugins/Circulation_hooks.t
t/db_dependent/Koha/Pseudonymization.t
t/db_dependent/Koha/Recalls.t
t/db_dependent/Koha/Recall.t
t/db_dependent/Koha/Template/Plugin/CirculationRules.t
t/db_dependent/Letters/TemplateToolkit.t
t/db_dependent/Members/GetAllIssues.t
t/db_dependent/Members/IssueSlip.t
t/db_dependent/Patron/Borrower_Discharge.t
t/db_dependent/Patron/Borrower_PrevCheckout.t
t/db_dependent/Reserves/GetReserveFee.t
t/db_dependent/Reserves.t
t/db_dependent/rollingloans.t
t/db_dependent/selenium/regressions.t
t/db_dependent/SIP/ILS.t
t/db_dependent/Holds.t
t/db_dependent/Holds/LocalHoldsPriority.t
t/db_dependent/Holds/HoldFulfillmentPolicy.t
t/db_dependent/Holds/HoldItemtypeLimit.t
t/db_dependent/Circulation/transferbook.t
2) Performe one or more checkouts for a patron, making sure
that the circulation rules allows for renewals (for example by
setting an earlier due-date).
3) Log in as this patron in OPAC and make sure the list of
checkouts is displayed correctly, and that renewing an issue
still works.
Sponsored-by: Gothenburg University Library
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This is Julian's patch with some extra cleanup to reduce repeated code
If AllowHoldPolicyOverride is enabled and only some pickup locations are
available, you still have the possibility to force one of the others
pickup locations.
But when there are zero pickup locations available, that is not
possible.
This patch change that by always displaying the list of pickup locations
when AllowHoldPolicyOverride is enabled.
Test plan:
1. Apply patch
2. Disable AllowHoldPolicyOverride
3. Create a biblio B with an item I at library A.
4. Configure this library A to not be a pickup location
5. Add a "Default holds policy by item type" for item I type where "Hold
pickup library match" is "item's home library"
6. Try to place a hold on biblio B
You should not be able to place a hold because there is no valid
pickup locations
7. Enable AllowHoldPolicyOverride
8. Try to place a hold on biblio B
You should now see all valid pickup locations in a dropdown list
(with an exclamation mark in front of each option) with none selected
by default
9. Verify you can place a title-level hold and an item-level hold
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Aleisha Amohia <aleishaamohia@hotmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Tests had a few problems:
- They weren't wrapped in a transaction explicitly
- They called Koha::Biblios->delete!
- They failed if run a couple times
This patch:
- Wraps things in a transaction
- Removes not-required things ($target_rs variable not used)
- Preserves the tests logic, but filters the resultset on the
biblionumber instead of deleting all the database which can fail
depending on FK constraints.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Right now the holds queue builder starts filling bib-level holds with
items whose patron's home library matches the item's home library.
It would be good and reasonable to have the option to prioritize
item's whose patron's home library matches the item's holding library
to minimize transfers.
Signed-off-by: Andrew Fuerste-Henry <andrewfh@dubcolib.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Prior to Koha 22.05, the SIP2 item information message had a side affect of updating the datelastseen field for items. This bug has been fixed, but was being utilized by inventory tools that used SIP2. We should bring back this affect and formalize it as an optional SIP2 config account setting.
Test Plan:
1) Apply this patch set
2) prove t/db_dependent/SIP/Message.t
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Test Plan:
1) Find record with at least 3 holds.
2) Change first holds priority as 2, Priority is changed to 3.
3) Try to change priority back to 1, Priority is changed to 2.
4) Apply this patch
5) Reload the page
2) Change first holds priority as 2, Priority is changed to 2.
3) Try to change priority back to 1, Priority is changed to 1.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Emmi Takkinen <emmi.takkinen@koha-suomi.fi>
Signed-off-by: Hinemoea Viault <hinemoea.viault@inlibro.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
* Go to the OPAC, log into your account
* Make changes to your personal details and save
* Go to the staff interface and use the link on the start page to
moderate the change request
* At the top of the list you'll see something like:
Without this patch:
Ignore|Patron details
With this patch:
Ignore | Patron details
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
We just figured out that multi-line TT comments show up
weirdly in translations and fixed it on bug 33332. So
this just follows the newly established pattern.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch begins reduing some of the extra things we are doing in
detail.pl that could easily be handled in the templates - fetching
authorised values and branches etc
It also removes a loop to find items that should be hidden, and instead
uses a searh parameter
The template changes either use item object rather than passed
variables, or utilize plugins to fetch authorised valued
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The previous syntax causes a warning during the execution of the translation script
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
