To test:
* Add rules fo different modules and with different settings
* Verify the saved module description for a saved rule matches the pull down
* Verify the saved filter matches the pull downs (especially for source and patron category)
Also:
* Renames 'User category' to 'Patron category'
* Remove some values from translations, that shouldn't be translated, like value attributs for options.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jan Kissig <jkissig@th-wildau.de>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This patch corrects option value names in MARC overlay rules to prevent
them from being translated.
To test:
1. Install a new language
1.1. In a terminal, run the following commands
gulp po:update
cd misc/translator
./translate install xx-XX
1.2. Go to Administration > Global system preferences
1.3. Search for language
1.4. In the language syspref check the box for the language you just installed
1.5. Save
2. In the staff interface in English, go to Administration > Record
overlay rules
3. In the column 'Preset' try the various options, note that the
'Added', 'Appended', 'Removed', and 'Deleted' settings change depending
on the chosen preset
4. Change the interface language
5. Redo step 3, notice that if the preset name is translated, the other
settings don't change
6. Apply patch
7. Redo step 3, the presets should now change the settings
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jan Kissig <jkissig@th-wildau.de>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Activates standard validation and error messages. Converts from
pattern check to digits class for "display order" field.
To test:
* Compare error message when leaving required fields empty
* Compare error message when entering wrong/false data in display order
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
If any of these fields were missing, notably the Numbering formula
then saving the new numbering pattern silently failed, it didn't give
any error but it didn't save any new pattern either.
Note that there is a plan to make description field optional, so even
if it currently is mandatory on the DB level we leave it optional
here (and due to people using production DB's in non-strict mode which
allows this to be optional).
To test:
1) After applying this patch make sure all the 3 fields must be
filled in
/cgi-bin/koha/serials/subscription-numberpatterns.pl?op=new
page and it cannot be saved without those.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
The JS function LoadResultsCovers is not used from the Staff interface.
It is supposed to load the local cover images in JS but actually we are embedding the thumbnail in the img tag.
Test plan:
Confirm that LoadResultsCovers was called but had no effect.
Note that the selector ^local-thumbnail only exists in shelfbrowser.inc
but results.js is only used from results.tt (not shelfbrowser.inc)
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Bug 31829 made a change to the change password form in the staff
interface to accommodate a gap in the CSS following the staff interface
redesign. This gap has been fixed, so we don't need a double class on
the fieldset.
With this change, the "hint" div can also be put back into place.
To test, apply the patch and locate a patron record in the staff
interface.
- Click the "Change password" button on the patron detail page.
- Confirm that the form layout looks correct.
- Enter mismatched passwords in the "New password" and "Confirm new
password" fields and click "Save"
- The validation error message should be aligned to the right of the
input field.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
It's not necessary to label a link with 'click', it being
a link and being formatted as such is enough.
To test:
* Go to administration > libraries
* Edit any library
* Verify link texts for UserCSS and UserJS
* Click to edit
* Click to collapse
* Apply patch, restart all
* Verify links have been updated, click removed
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
To test:
1. HouseboundModule - disabled
2. CollapseFieldsPatronAddForm, add 'Housebound roles'
3. Edit/create a patron.
4. Notice the useless Housebound roles link at the top of the page
5. APPLY PATCH
6. Try 1 - 3 again, this time no Housebound roles at the top ( Show collapsed fields )
7. Turn on HouseboundModule and make sure it now shows
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Philip Orr <philip.orr@lmscloud.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Linked system preference in description to cross reference, and
and removed the spaces in the bracketed text.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Clarify that fields will fall back to MarcFieldsToOrder from MarcItemFieldsToOrder.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This patch updates the vendor issues template so that title and
breadcrumbs follow the same pattern on other updated templates:
Translatable strings in the title and breadcrumbs using the template
WRAPPER.
To test, apply the patch and go to Acquisitions.
- Search for a vendor and view the details.
- Click the "Isssues" link in the sidebar.
- Check that the page title and breadcrumbs are correct in each
variation of the page:
- The main page
- New vendor issue
- Modify vendor issue
- Issue deletion confirmation
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
The checkouts table is displayed in the DOM then hidden in JS, then we show it if the cookie is set.
This patch makes the table hidden by default, and show it if/when needed
Test plan:
Check an item out, see the checkouts list view
Play with "Always show checkouts automatically", refresh the page
=> UI should behave better than before this patch
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
To test:
1 - View a record details page for a record with items
2 - Click on the 'Items' tab
3 - Change 'Bookable' to 'Yes' and update for an item
4 - View the details page - place a booking
5 - Checkout the item to the patron it is booked for
6 - Note the alert shows, but encompasses the whole page
7 - Apply patch
8 - Check in the item
9 - Checkout the item again
10 - Note the alert shows above the checkouts page as expected
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This patch adds a new method to the Koha::Notice::Message class to wrap
content in the same way we currently do at email send time. We then
update the notice preview to use this method so we're embedding
NoticeCSS into that iframe. This means the generated preview should now
exactly match how your notice will display in email clients including
any CSS you may have placed within NoticeCSS.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Fixed typo in POD of html_content
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This patch adds conditional formatting based on whether the notice was
generated from an HTML template or a plaintext one. We simply drop the
'html_line_break' filter for the case where the notice should already be
html formatted.
I was tempted to replace the html_line_break for plaintext formatted
notices too as I believe this closer resembles how we actually output
such generated notices.. but I decided that should be for another bug.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
On bug 35284 we added the delay on the column filters using dt's
throttle builtin function.
From doc:
https://datatables.net/plug-ins/api/fnSetFilteringDelay
"""
Please note that this plug-in has been deprecated and the dt-init searchDelay option in DataTables 1.10 should now be used. This plug-in will not operate with v1.10+.
Test plan:
Note that column filtering still work as before (test on different
tables, see bug 35284 for the list)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This page is a single form, all fields must have inputs to avoid data loss/mismatch
To test:
1 - Find a record in the catalog and add or edit items to have one item with a barcode and one without
2 - Place an item level hold on the item with no barcode
3 - Place another hold for a different patron on the item with a barcode
4 - From the holds table add an expiration date to the hold with a barcode and save
5 - Note the hold on the item with no barcode is now on the item with a barcode and the other hold is now a next available hold
6 - Delete the holds
7 - Apply patch
8 - Repeat 2-4
9 - Confirm the itemnumbers for the holds have not changed
Signed-off-by: Andrew Fuerste-Henry <andrewfh@dubcolib.org>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This patch adds the check for permission to the biblio menu item too.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This patch updates several files which use the term "issues" without
context, changing them to "Vendor issues." Unchanged is the vendor
issues page template, vendor_issues.tt, which is updated in Bug 35417.
To test, apply the patch and go to Acquisitions.
- Search for a vendor and view the details.
- You should see a "Vendor issues" link in the sidebar.
- Go to Patrons and search for a patron. View the patron's details.
- Click More -> Set permissions.
- Under Acquisitions management you should see "Manage vendor issues
(issue_manage)"
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
It's not necessary to label a link with 'click', it being
a link and being formatted as such is enough.
This updates the occurences in the sytem preferences editor.
To test:
* Go to system preferences like OpacUserCSS that allow editing
in a textarea
* Verify link descrptions for editing and collapsing the area
* For a section of grouped system preferences, hover over the
arrow and verify the text for collapsing/uncollapsing the area
* Apply patch, restart all
* Verify the links and tool tips have been updated
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This makes several changes on the form for adding a data provider
and on the data provider details page:
* Enable ERMModule system preference
* Go to the ERM module, add a new data provider
* Look at the labels on the form
* Save and check the labels on the summary tab
* Apply patch, run: yarn build
* Verify fixes
...Id => ID
...sushi => SUSHI
...counter => COUNTER
...Report Release => Report release
...
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Bookseller should be vendor to match our preferred terminology.
To test:
* Run:
prove t/db_dependent/Acquisition/GetBasketGroupAsCSV.t
* Add a basket with at least one order line
* Close basket and add to a basket group
* Close the basket group
* Export as CSV
* Verify headers include "Bookseller"
* Apply patch, restart all
* Repeat export, it should now say "Vendor"
* Rerun tests
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Updates ''{cash_register}'' to '{cash_register}'
To test:
I believe this is not actually testable, as cash registers
can only be archived and not deleted?
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
The too many checked out message can be very confusing for librarians
when the limit specified is more or less than the number of checkouts
the patron already has. We should make it clear to the librarian that
his is only counting certain types of checkouts by giving them the
issuing rule criteria used.
Test Plan:
1) Apply this patch
2) Try to check out more items than the circ rules allow for
regular and on-site checkouts
Signed-off-by: Eric Gosselin <eric.gosselin@inlibro.com>
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This patch allows the tab key to indent lines as well as trigger autocomplete.
Test plan:
1) Apply patch, navigate to reports and create a new SQL report
2) Click in the text editor and press tab, it should indent and then trigger the autocomplete options
3) Type something to select from the autocomplete box and press tab - it should autocomplete that option
4) Type any word and then press space. Now press tab and it should indent again
Signed-off-by: Andrew Fuerste-Henry <andrewfh@dubcolib.org>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Test plan, with the previous 2 patches applied:
1) Checkout an item to Koha user, barcode 39999000003192
2) Renew that barcode
3) Visit the items page of the biblio record, click on 'View' in front of 'Current renewals'
/cgi-bin/koha/catalogue/moredetail.pl?biblionumber=76
4) Notice it shows the renewals as expected
5) Return the same item: 39999000003192
6) Repeat 1) to 3). Notice it shows 2 current renewals even tho only 1 corresponds to the currently active check out
7) Renew again. Notice it shows 3 current renewals even tho only 2 correspond to the currently active check out
7) Apply this patch. Notice it now only shows 2 current renewals
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
1) Checkout an item to Koha user, barcode 39999000003192
2) Renew that barcode
3) Visit the items page of the biblio record, click on "View" in front of "Current renewals"
/cgi-bin/koha/catalogue/moredetail.pl?biblionumber=76
4) Notice it shows the renewals as expected
5) Return the same item 39999000003192
6) Repeat 3). Notice it never loads renewals and network console shows HTTP error 400
7) Apply this patch. Repeat the test plan. Notice the 'Current renewals' no longer shows for the item because it is no longer checked out, so whatever past renewals are no longer 'current'
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
'Current renewals' is always showing, even if empty.
Test plan:
1) Checkout an item to Koha user, barcode 39999000003192
2) Renew that barcode
3) Visit the items page of the biblio record, click on "View" in front of "Current renewals"
/cgi-bin/koha/catalogue/moredetail.pl?biblionumber=76
4) Notice all items have the 'Current renewals' label entry, but only the checked out item in step 1) has the 'Current renewals' label entry
5) Apply patch. Notice only the item with current renewals is showing the 'Current renewals' label entry with the respective value.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This patch updates two preservation module system preferences so that
they offer dropdowns of "Not for loan" values instead of requiring entry
of a specific code.
The patch also adds a missing "." at the end of one preference
description.
To test, apply the patch and restart services.
- Go to Administration -> System preferences.
- Search for "preservation"
- Check that the "PreservationNotForLoanDefaultTrainIn" and
"PreservationNotForLoanWaitingListIn" preferences have dropdowns
offering "Not for loan" values.
- Confirm that your choices are correctly saved.
Signed-off-by: Barbara Johnson <barbara.johnson@bedfordtx.gov>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This patch fixes some inconsistencies in the record matching rules
administration page, making sure the page title, breadcrumb
navigation, and page headers are consistent with each other.
Some controls on this page have been updated to use Bootstrap link style
with Font Awesome icons added.
Test each page to confirm that page title, heading, and breadcrumbs are
consistent:
- Administration -> Record matching rules
- New record matching rule
- Edit record matching rule
- Delete record matching rule
- Test the process of adding new match points and new match checks,
and removing match points and match checks.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This patch updates two system preferences, "OPACUserJS" and
"OPACUserCSS" so that the "here" links in the description instead read
"library administration".
To test, apply the patch and go to Administration -> System preferences.
- Search for "opacuser"
- The descriptions of the "OPACUserJS" and "OPACUserCSS" preferences
should include the phrase "...can be defined in library
administration," with "library administration" leading to the correct
page.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This change displays a warning message instead of the patron image
upload feature in the patron record when the patron is missing the
cardnumber.
Without this change, the staff user can try to upload a patron image
but it will silently fail. This change warns the staff user of the
cardnumber requirement for patron image upload.
Test plan:
0. Apply the patch
1. Enable the "patronimages" system preference
2. Go to http://localhost:8081/cgi-bin/koha/members/moremember.pl?borrowernumber=51
3. Click "Add" over the patron image placeholder
4. Note the "Upload photo" button and the ability to take a patron photo if your
device has a camera
5. Remove "cardnumber" from BorrowerMandatoryField
6. Go to http://localhost:8081/cgi-bin/koha/circ/circulation.pl?borrowernumber=51
7. Edit the patron to remove the cardnumber
8. Click "Add" over the patron image placeholder
9. Note that no patron image upload features appear. Instead, only
a warning appears stating that the patron needs a cardnumber before
the patron image upload can be performed
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
To reproduce:
1. Open any biblio and edit that record.
(select "Edit record" from the "Edit" drop-down menu).
2. Check that selecting the text in any draggable block input/textarea
fields with a mouse is not possible - it starts dragging instantly.
3. Apply the patch
4. Make sure that draging is activated only when you click
on the "::" icon in front of the dragged item. And text selection
works correctly.
Signed-off-by: Phil Ringnalda <phil@chetcolibrary.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
After importing titles from a list there is a link to the background job
that is displayed.
This link points to /cgi-bin/koha/admin/background_jobs/:id
There is a route to this path in routes/erm.js, to redirect to the
correct URI /cgi-bin/koha/admin/background_jobs.pl?op=view&id=:id
However this link will not work if we are accessing it from outside the
ERM app/module, or if we are opening it in a new tab/window.
The idea was interesting, but does not work...
Test plan:
Create a new ERM local package, a new list (virtual shelf), add some
items to the list.
Go to E-resource management > eHoldings > Local > Titles > Import from a list
Click "import"
Notice the "see job" link and click it
=> Confirm that with this patch applied you can open it in a new tab
without getting a 404
Signed-off-by: Matt Blenkinsop <matt.blenkinsop@ptfs-europe.com>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
To test:
1. Run any page that contains the "Search patrons" search bar through an HTML validator and you will see a lot of:
Stray start tag span.
Stray end tag span.
2. Apply patch
3. Try step 1 again, no more errors from the HTML validator.
4. Make sure the patron searches still work when limiting by 'Search field'.
Signed-off-by: Brendan Lawlor <blawlor@clamsnet.org>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
To test:
1. Add a value to SMSSendDriver like 'Emial'.
2. Go to BorrowerUnwantedField and attempt to hide "Mobile phone number (smsalertnumber)"
3. Go to members/memberentry.pl and see the field is not hidden.
4. APPLY PATCH
5. Try step 3 again and this time the field should be properly hidden.
Note: This patch also includes some indentation changes.
Signed-off-by: Andrew Fuerste-Henry <andrewfh@dubcolib.org>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
To reproduce:
1. Open any biblio and edit that record.
(select "Edit record" from the "Edit" drop-down menu).
2. Repeat any tag that may be repeated and has more than one subfield
(e.g. 050 or 082) (click "Repeat this tag")
3. Try dragging a subfield of the new repeated tag
Apply the patch and make sure dragging a subfield works well.
Signed-off-by: Phil Ringnalda <phil@chetcolibrary.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Update the staff interface and OPAC XSLT files to use
"Online resources" as the label in search results, instead of
"Online access". This matches the label used in the detail page
for a record.
Test plan:
1. Search for perl in the staff interface and OPAC (or add to
an existing record a URL to 856$u with 4 for the first
indicator).
2. For any search result that displays the "Online access" label,
view the detail page for the record.
3. Note that the detail page uses the label "Online resources".
4. Apply the patch and restart_all.
5. Repeat steps 1 and 2.
6. Note that the search result pages now show "Online resources" for
the label, matching the detail page.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: David Cook <dcook@prosentient.com.au>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Steps to reproduce:
1. On cataloguing, open the 007 builder.
2. Choose material type 'Video recording'
3. On 04 choose g - Laserdisc
4. Click save
=> SUCCESS: 'g' correctly shows on the 007
5. Edit the 007 again
=> FAIL: on 04, 'g - Laserdisc)' is displayed
6. Apply this patch
7. Repeat 4 and 5
=> SUCCESS: no trailing ')'
8. Sign off :-D
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This patch revises the wording of the warning which is displayed on the
'About' page when the 'OPACPrivacy' system preference is enabled but the
'AnonymousPatron' preference is empty. The new phrasing is hopefully
more clear.
To test, apply the patch and go to Administration -> System preferences.
- Search for 'AnonymousPatron' and enter a borrowernumber if necessary.
- Log in to the OPAC and click the 'Privacy' tab in the left-hand
sidebar of the user summary page.
- Set your privacy rule to 'Never'.
- Return to Admnistration -> Sytem preferences in the staff interface.
- Search for 'OPACPrivacy' and set it to 'Allow'.
- Clear the borrowernumber from the 'AnonymousPatron' preference.
- Go to the 'About" page and open the 'System information' tab.
- You should see an error message at the bottom:
"Some patrons have requested privacy after their items are checked in,
but the AnonymousPatron preference is not set correctly. Set it to a
valid borrower number or checkins for these patrons will fail."
Signed-off-by: Barbara Johnson <barbara.johnson@bedfordtx.gov>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Pedro Amorim <pedro.amorim@ptfs-europe.com>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This patch corrects incorrect capitalization in the last-borrower
include file. The string his hidden except to screen readers, so visual
confirmation isn't straightforward. Viewing the diff should be enough to
confirm this single character change.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Typo in message :
NOTE: Fields listed in the 'UniqueItemsFields' system preference will not be copied
The preference is Item without 's' : 'UniqueItemFields'
Test plan :
1) Check system preference 'UniqueItemFields' contains values
2) Go to acquisition to create a new order from new record
3) Check the note you see with the system preference
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Same patch as
commit bee2b3d33e
Bug 33949: Fix display of old checkouts if no checkouts exist
But for the staff interface.
"""
If we pass an empty array from the perl controller, we retrieve an empty
string from the template, and the merge does not work.
This patch fixes the following bug:
Pick a patron without checkout history
Check them an item out and check it in
=> The table is empty, whereas it should display the item that has been
checked in.
"""
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds some additional tests for usage reports to improve test coverage.
It also fixes a small error in the reports store - "platforms" v "platform". This was affecting which columns could be selected for platform reports
Test plan:
yarn cypress run
All tests should pass
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Koha::Patron->issuer is not covered by tests!
Test plan:
1. Set RecordStaffUserOnCheckout to "record"
2. Check an item out and in to a patron
3. Go to their circulation history
=> Without the patch you get an error
=> With this patch applied the table displayed correct. The "checkout by" column contains the name and the link to the librarian
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The .po files contains the whole block after this line. I don't really
understand what's happening but this change fixes the problem.
Test plan:
1. Run the following command before and after the patch and compare the
diff
% gulp po:update --lang de-DE --task messages-js
2. Confirm that the list on this vue is correctly populated
Signed-off-by: Matt Blenkinsop <matt.blenkinsop@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
in Preservation/WaitingList.vue
See: https://wiki.koha-community.org/wiki/Terminology
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To test:
1. Make some holds on a record and make sure some are set to expired.
2. Go to to reserve/request.pl?biblionumber=X for the biblionumber
3. Try updating something besides the expiration date. i.e. Pickup library
4. Click Update hold(s)
5. Notice the expirated holds have lost their expiration date.
6. APPLY PATCH
7. Try steps 2-4 again, this time the expiration date shold be retained.
8. Make sure Table settings still work and you can properly hide columns.
9. The hold expiration date should be hide-able.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Add two requirements when registering a new patron:
- A child patron must have a guarantor. This is controlled by
a new syspref ChildNeedsGuarantor.
- A guarantor cannot be a guarantee.
Test plan:
1. Add a child patron without guarantor or child patron with guarantee
as guarantor succesfully.
2. Apply this patch.
3. Add a child patron as a guarantor.
=> Error is raised.
4. Turn syspref "ChildNeedsGuarantor" ON.
5. Add a child patron without a guarantor and error "Child needs a
guarantor" is raised.
6. Add guarantor. Guarantor can either be existing patron or added with
"Contact" section.
=> Save without errors.
Also prove t/db_dependent/Koha/Patron.t
Sponsored-by: Koha-Suomi Oy
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch simply adds a note to the CookieConsent and CookieConsentedJS
system preferences to link to the HTML customizations page and hint at
which customization should be used to affect the components governed by
the preferences.
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
For partial receives with items created on order, the
aqorders_items table was not correctly updated when only
some of the ordered items were received.
To test:
1) Create a basket with creating items on order
2) Create an order line with 3 items
3) Close basked
4) Receive shipment and create invoice
5) Receive your created order line
6) Edit first item displayed, add barcode
7) Check checkbox and receive
8) Verify the order line has been split 2:1
9) Receive again - notice all 3 items are showing.
We should only see the remaining 2
10) Undo receive
11) Apply patch
12) Repeat steps 5)-9)
13) Verify that in step 9) only the remaining 2 items display now.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Test plan:
1) Check an item in with already a confirmed hold
2) Cancel the hold, it was cancelled without possibility to choosing a
reason
3) Apply this patch and do it again, you must see an input to choose
your cancellation reason (list from VA)
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
1. Have some checkouts
2. Go to the issue-table and select some of those checkouts and check them in.
3. Look at the tab, Checkouts(X)
4. This is not updated and now shows an incorrect number of checkouts.
4. APPLY PATCH, clear browser cache/
5. Try again, now when the table reloads the 'Checkouts(X)' tab should be correctly updated.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To test:
1. Have two checkouts. Click one for Renew and one for Checkin. Click on Check in selected items.
2. When the table reloads the 'renew' selections should be retained
3. Have two checkouts. Click one for Renew and one for Checkin. Click on Renew selected items.
4. When the table reloads the 'check in' selections should be retained
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch updates the Renew and Check-in buttons so that they have
icons matching the ones used for the Renew and Check-in search tabs in
the header.
The patch also moves the Renew button so that it is next to the Renew
all button. I think this makes more logical sense. So the order is:
- Check in selected items
- Renew selected items
- Renew all
Signed-off-by: Kelly <kelly@bywatersolutions.com>
Signed-off-by: Brendan Lawlor <blawlor@clamsnet.org>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Kelly <kelly@bywatersolutions.com>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Kelly <kelly@bywatersolutions.com>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To test:
1. APPLY patch, clear browser's cache
2. Have more than 1 checkout issued to a borrower.
3. Load the checkout table on circ/circulation.pl
4. Notice that there is now 'Renew selected items' and 'Checkin
selected items' button.
5. Play around with each making sure that they work as excepted when
checkouts are checked in either the 'Check in' or 'Renew' columns.
6. Uncheck everything in the 'Renew column', the 'Renew selected items'
button should be disabled.
7. Uncheck everything in the 'Checkin column', the 'Checkin selected
items' button should be disabled.
8. Try unchecking some of these to make sure the Renew/Checkin button is
properly disabled when no related checkboxes are checked.
9. Try using the select all/none options at the top of both the 'Renew'
and 'Checkin' columns. Make sure the 'Renew selected items' and
'Checkin selected items' become properly disabled/enabled.
10. Make sure the 'Renew all' button still works properly.
11. Do the test plan of 5th patch "Make sure renew/checkin selections"
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Kelly <kelly@bywatersolutions.com>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This fix patrons_search.t but other selenium tests certainly need
adjustements
Signed-off-by: David Cook <dcook@prosentient.com.au>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: David Cook <dcook@prosentient.com.au>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: David Cook <dcook@prosentient.com.au>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To test:
* When a specific initComplete exists (general patron search)
* When no specific initComplete exists (cities)
=> KO
* ERM tables display twice the "show X entries" dropdown list
* Column filters are not affected
Signed-off-by: David Cook <dcook@prosentient.com.au>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This change adds the missing subfields h and x to field 583 for
the detail XSLT in the staff interface.
Test plan:
0. Apply the patch and koha-plack --reload kohadev
1. Go to http://localhost:8081/cgi-bin/koha/cataloguing/addbiblio.pl?biblionumber=29
2. Click on tab "5"
3. Scroll down to 583 and click on "ACTION NOTE" to expand subfields
4. Fill in using the following example:
583 0#$adowngraded$c19910110$hJoe Smith$otitle$xfrom secret FRD to confidential NSI
5. Click "Save"
6. Note that the "Action note" now shows "Joe Smith" and "from secret
FRD to confidentail NSI"
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To test:
1. Go to Administration > Did You Mean
2. Attempt to drag and drop plugin options.
--> Confirm that they are not draggable
3. Apply patch and clear browser cache
4. Reload the page
--> Confirm that drag-and-drop now works
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Test plan:
Verify that you can filter by reset password.
And that the uppercase code is replaced by a description.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Matt Blenkinsop <matt.blenkinsop@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch moves the SelfCheckHelpMessage system preference into HTML
customizations, making it possible to have language- and
library-specific content.
To test you should have some content in the SelfCheckHelpMessage
system preference before applying the patch. Apply the patch, run the
database update process, and rebuild the OPAC CSS.
- In the staff client, go to Tools -> HTML customizations and verify
that the content from SelfCheckHelpMessage is now stored there.
- The HTML customization entry form should offer SelfCheckHelpMessage
as a choice under "Display location."
- Update and reinstall active translations (for instance fr-FR):
- perl misc/translator/translate update fr-FR
- perl misc/translator/translate install fr-FR
- Enable the translation if necessary under Administration -> System
preferences -> language.
- Enable the "opaclanguagesdisplay" preference if necessary.
- Edit the SelfCheckHelpMessage HTML customization and add unique
content to the "fr-FR" tab.
- Log into the self checkout system and click the "Help" link at the
top.
- On the help page, confirm that the SelfCheckHelpMessage content is
shown there.
- Switch to your updated translation and confirm that the content you
added for your translation shows up correctly.
- Go to Administration -> System preferences and search for
"SelfCheckHelpMessage." It should return no results.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch removes some commented out lines and some unnecessary imports. No impact to working code - self signoff
Signed-off-by: Matt Blenkinsop <matt.blenkinsop@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch moves the SelfCheckInMainUserBlock system preference into
HTML customizations, making it possible to have language- and
library-specific content.
To test you should have some content in the SelfCheckInMainUserBlock
system preference before applying the patch. Apply the patch, run the
database update process, and rebuild the OPAC CSS.
- In the staff client, go to Tools -> HTML customizations and verify
that the content from SelfCheckInMainUserBlock is now stored there.
- The HTML customization entry form should offer
SelfCheckInMainUserBlock as a choice under "Display location."
- Update and reinstall active translations (for instance fr-FR):
- perl misc/translator/translate update fr-FR
- perl misc/translator/translate install fr-FR
- Enable the translation if necessary under Administration -> System
preferences -> language.
- Enable the "opaclanguagesdisplay" preference if necessary.
- Edit the SelfCheckInMainUserBlock HTML customization and add unique
content to the "fr-FR" tab.
- Log into the self check-in system and confirm that the
SelfCheckInMainUserBlock content is shown there.
- Switch to your updated translation and confirm that the content you
added for your translation shows up correctly.
- Go to Administration -> System preferences and search for
"SelfCheckInMainUserBlock." It should return no results.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch moves the SCOMainUserBlock system preference into HTML
customizations, making it possible to have language- and
library-specific content.
The patch also makes a minor fix to CSS in order to get the "Back to
top" link to show up correctly in self-checkout and self-checkin.
To test you should have some content in the SCOMainUserBlock
system preference before applying the patch. Apply the patch, run the
database update process, and rebuild the OPAC CSS.
- In the staff client, go to Tools -> HTML customizations and verify
that the content from SCOMainUserBlock is now stored there.
- The HTML customization entry form should offer SCOMainUserBlock
as a choice under "Display location."
- Update and reinstall active translations (for instance fr-FR):
- perl misc/translator/translate update fr-FR
- perl misc/translator/translate install fr-FR
- Enable the translation if necessary under Administration -> System
preferences -> language.
- Enable the "opaclanguagesdisplay" preference if necessary.
- Edit the SCOMainUserBlock HTML customization and add unique
content to the "fr-FR" tab.
- Log into the self checkout system and confirm that the
SCOMainUserBlock content is shown there.
- Switch to your updated translation and confirm that the content you
added for your translation shows up correctly.
- Go to Administration -> System preferences and search for
"SCOMainUserBlock." It should return no results.
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Removes two occurrences and a commented one.
Test plan:
[1] Go to cataloguing editor. Open dev console. Clone 500.
[2] Go to Admin/Did you mean. Try to toggle options.
With this patch it works. Without this patch, JS errors.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Emily Lamancusa <emily.lamancusa@montgomerycountymd.gov>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch updates Flatpickr CSS in the OPAC and staff interface so that
date fields are displayed correctly in iOS mobile views.
To test, apply the patch and rebuild the OPAC and staff interface CSS.
- In the OPAC, click "Create new account"
- In the account entry form, confirm that the date of birth field looks
correct and that the date-picker works as it should.
- In the staff client, go to Patrons -> New patron.
- Check the date of birth field in this form too.
This patch has been tested in the Xcode iOS device simulator with iOS
17. While I wasn't able to reproduce the problem in Firefox, I was able
to use the developer tools' responsive design mode to trigger the mobile
view and thus be able to see the styles which are being applied:
- In the OPAC, on the "Create new account" screen, open the Web
Developer Tools panel (Tools -> Browser tools -> Web Developer Tools).
- Click the "Responsive Design Mode" button in the upper-right corner of
the developer tools panel (it looks like a phone and tablet together).
- The main browser window will now how some settings at the top.
- In the first dropdown, choose an iPhone model.
- The date of birth field should now be styled differently because of
the addition of a "flatpickr-mobile" style.
- Right-click the field and choose "Inspect." In the developer console
you can see the styles which are being applied to the field. One of
those should be ".flatpickr-input.flatpickr-mobile"
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Emily Lamancusa <emily.lamancusa@montgomerycountymd.gov>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This will now use the centered logic from buildSearchPatronQuery, not only
fixing the original issue of not being considering all the terms in the
search input, but also reusing already established code.
Test plan, k-t-d:
1) Install FreeForm, enable ILLModule sys pref, run:
bash <(curl -s https://raw.githubusercontent.com/ammopt/koha-ill-dev/master/start-ill-dev.sh)
2) Create a FreeForm ILL request and input 23529000035676 in the cardnumber, that's "Henry Acevedo".
3) Go back to the ILL list table, input "henry" in the bottom "Patron" filter input and press the "Search" button, notice it fetches the request correctly.
4) Now do the the same search but with "henry acevedo", notice the request is not retrieved.
5) Apply patch. Repeat. Do the same for the "patron" input field and the "keyword" input field.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Add table_prefix argument to buildPatronSearchQuery.
This allows the buildPatronSearchQuery function to also perform the search
on a related table, instead of the default patron table.
This is relevant because the query will be performed on the ILL API endpoint,
so the table being searched will have to be prefixed with 'patron.', instead of the
default 'me.'
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Fix the following JS error:
Uncaught TypeError: search_fields.forEach is not a function
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Pedro Amorim <pedro.amorim@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To Test:
1. Place a hold
2. Check-in an item of the held record
3. No hold modal 😱
4. APPLY PATCH
5. Hold modal!!!
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch moves form any staff_searchable attribute being automatically
included in the the Standard patron serch, to allowing the librarian to choose.
Current searchable attributes will be marked as 'searched_by_default'
To test:
1 - Add a searchable patron attribute type
2 - Add some values
3 - Confirm they are searched in a 'Standard' patron search
4 - Apply patch
5 - Go to admin - >patron attribute types
6 - Note new 'Searching' column
7 - Confirm attribute is 'Searched by default'
8 - Confirm searches work as before
9 - Edit the attribute type
10 - Uncheck 'searched_by_default'
11 - Save
12 - Confirm attribute not searched in 'Standard' search
13 - Select the attribute in patron search dropdowns
14 - Confirm it is correctly searched
Signed-off-by: Kelly McElligott <kelly@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This enhancement allows libraries to modify an existing orderline and increase the quantity in the order. The quantity is increased by adding more items to the order, through the usual Item for which is visible when adding or modifying an order.
To test:
1. Ensure you have a budget, fund, vendor etc. to use the Acquisitions module
2. Open a new basket. Make sure you do NOT check the 'orders are standing' option
3. Add an order to the basket using any method. Add an item or more to this orderline and save the order to the basket
4. Click Modify to edit the orderline
5. Notice the quantity text field. Try to directly change this number. You'll get an error pop-up and be redirected back to the basket.
6. Apply the patch, restart services, refresh the basket page
7. Click Modify to edit the orderline
8. Notice the item form and Items list table is visible with your existing item(s) for this order. There should be no Action buttons as actions can't be done on an existing item order.
9. Confirm you are able to add more items to the Items list and to the order by filling out the form and clicking 'Add item' as normal. Confirm the quantity increases accordingly.
10. Confirm the Edit and Delete buttons for newly added items work as expected
11. Save and confirm the quantity for the orderline has increased
12. Confirm this behaviour persists with the other methods of adding new orders to a basket
Sponsored-by: Pymble Ladies' College
Signed-off-by: Katariina Hanhisalo <katariina.hanhisalo@xamk.fi>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Perltidy
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch moves the OpacSuppressionMessage system preference into HTML
customizations, making it possible to have language- and library-specific
content.
To test you should have some content in the OpacSuppressionMessage
system preference before applying the patch. Apply the patch and run the
database update process.
- In the staff interface, locate a bibliographic record and open it for
editing.
- Under tab 9, tag 942, change subfield n, "Suppress in OPAC", to "Yes"
and save the record.
- Go to the OPAC and try to navigate directly to the bibliographic
detail page for that record:
/cgi-bin/koha/opac-detail.pl?biblionumber=X
- You should be redirectd to the "Blocked" page. Under the message "You
are not authorized to view this record" you should see the content
which was previously in the OpacSuppressionMessage system preference.
- In the staff client, go to Tools -> HTML customizations and verify
that the content from OpacSuppressionMessage is now stored there.
- The HTML customization entry form should offer OpacSuppressionMessage
as a choice under "Display location."
- Update and reinstall active translations (for instance fr-FR):
- perl misc/translator/translate update fr-FR
- perl misc/translator/translate install fr-FR
- Enable the translation if necessary under Administration -> System
preferences -> language.
- Enable the "opaclanguagesdisplay" preference if necessary.
- Edit the OpacSuppressionMessage HTML customization and add unique
content to the "fr-FR" tab.
- Go to the OPAC and switch to your updated translation. Try to view
the suppressed record again and confirm that the content you added
for your translation shows up correctly.
- Go to Administration -> System preferences and search for
"OpacSuppression." The description of these preferences should show an
updated message about using HTML customizations to create
OpacSuppressionMessage content.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This makes it more flexible and the slip can be added to the
notice name easily.
For example: In German the slip would usually be part of the word, not separate:
Gebührenquittung (slip = quittung)
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This renames the notices and slips module from
Patrons toolbar (slip) to Patrons (custom slip)
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
* Perltidied the section with tabs in printslip.pl
* Fixed indentation and tabs in letter.tt
* Added missing TT filters to members-toolbar.inc
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds a new module to letters 'patron_slip' / Patrons toolbar
(slip)
This also combines some of the slip printing JS to make things more
direct
To test:
1 - Apply patch
2 - restart_all
3 - yarn build
4 - Confirm you can print slip, summary, quickslip, and checkin slip
when viewing a patron's account
5 - Enable DisplayClearScreenButton syspref, and test that it works
with both values
6 - Go to Tools->Notices and slips
7 - Define a new notice in the 'Patron toolbar (slip)' module
8 - Enter content like below in the 'Print' transport:
Patron has [% borrower.holds.count %] holds
List of holds:
[% FOREACH hold IN borrower.holds %]
===============================
Reserve id: [% hold.reserve_id %]
Title [% hold.biblio.title %]
[% END %]
9 - Go to patron scree
10 - Note new option under 'Print'
11 - Print the new slip and confirm it works (try with and without
placing holds for patron
Signed-off-by: Andrew Fuerste-Henry <andrewfh@dubcolib.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch removes the Damaged radio box options ( Ignore, yes, no ) in favor a full damage status search option
To test:
1. APPLY PATCH, restart services.
2. Make sure you mark some items as damaged.
3. Go to the item and search and limit by 'Damaged'
4. You should only see your 'Damaged' items.
5. Export the results as a CSV, make sure the CSV is well-formed and accurate.
Signed-off-by: Barbara Johnson <barbara.johnson@bedfordtx.gov>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Perltidied.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch follows the logic of bug 32166 and adds specific inputs for each order to avoid any misalignment when some records are not imported
To test:
1 - Find a vendor in acquisitions
2 - Create or find an open basket
3 - Add to basket form a new file
4 - Stage file and add to basket
5 - Select the second record in the list
6 - Enter price info
7 - Save (don't forget, you need to set item type in the second tab)
8 - The order has no price info!
9 - Apply patch
10 - Repeat 3-7 above, staging file fresh
11 - Confirm order has correct prices
12 - Test with a file with many records
13 - Confirm any combination of choosing/skipping records works as expected
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds Bootstrap classes to the "Add" button on the curbside
administration page, in the "Curbside pickup hours" section. This makes
it consistent with the markup of similar buttons in the interface and
makes it slightly smaller so that it fits better in the form.
To test, apply the patch and make sure the "CurbsidePickup" preference
is enabled.
- Go to Administration -> Curbside pickups.
- Fill out the form, including the "New slot" fields in the "Curbside
pickup hours" section.
- Confirm that the corresponding "Add" button looks correct, and that
it works to add your new slot.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
* Make sure MARC21 is mentioned, as this only updates MARC21 XSLT files
* Move ending punctuation outside the pull down
* remove 'obey' - it's not needed
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
When using the facets for author, i.e. limiting a search, it makes sense to preserve the default sort order for the results (relevance, etc)
When clicking on an author to search the catalog for all works by an author, it would be nice to be able to optionally specify sorting for the listing - i.e. publication date, or title
This patch adds two new system preferences:
AuthorLinkSortBy
AuthorLinkSortOrder
To test:
1 - Do a search in intranet and staff for 'austen'
or an author you have multiple titles from
2 - Click the linked name
3 - Note a new search is performed, sorted by field from
defaultSortField preference
4 - Apply patch, updatedatabase, restart_all
5 - Ensure nothing has changed by searching again
6 - Set AuthorLinkSortBy to 'date of publication' and
AuthorLinkSortORder to asc
7 - Search again, comfirm links obey sorting specific above
8 - Test other values - confirm links are updated in both staff/opac
and results/details
Signed-off-by: Andrew Fuerste-Henry <andrewfh@dubcolib.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds attributes that have been marked searchable to the patron
search dropdowns
To test:
1 - Define some new patron attribute types and make then staff_searchable
2 - Add some values to patrons
3 - Confirm they are searched in 'Standard' search, but there is no other way to search them
4 - Apply patch
5 - Confirm the fields now show in patorn search dropdowns
6 - Search using 'standard' and confirm the searhc works
7 - Search specific attributes and confirm the searhc works
Signed-off-by: Janusz Kaczmarek <januszop@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Janusz Kaczmarek <januszop@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch moves code form scripts to a template plguin and unifies the calls
To test:
1 - Add a searchable patron attribute type
2 - Add values to several patrons and test patron searching from
Patrons home
Patrons search results
Holds request screen
Article request screen
Patron search sidebar
3 - Apply patch
4 - Confirm results are the same
Signed-off-by: Janusz Kaczmarek <januszop@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This changes how the required appears. Now it will display 'our'
text for requires fields instead of using the browser default.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
There were references to ForceLibrarySelection and ForceLibrarySelection (notice
the additional d) in the patch.
Standardized to: ForceLibrarySelection
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds the ability to force staff to select a library when
logging into the staff interface. This is done via a new system
preference: 'ForcedLibrarySelection'
To test:
1) Apply patch, restart_all, and updatedatabase
2) Log out of the staff interface. Notice the login form looks the same
and the "Library:" dropdown has 'My Library" selected as default. Log
back into the staff interface.
3) In Administration, search for the system preference
"ForcedLibrarySelection". Set it to 'Force' and press save.
4) Log out of the staff interface. Notice that this time, the "Library:"
dropdown is required and has a blank selection as the default.
5) Fill in the username and password but do not select a library. Click
'Log in'
6) Notice you cannot log in and are asked to 'Please select an item in
the list'
7) Select a library from the drop down and click 'Log in'
8) Notice the login was successful and you were logged in to the library
you selected.
9) Try loggin in with some other libraries to verify it works as
expected
10) Sign-off :)
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch add a Quantity field and a Cost field to the manual invoice form this will allow to automatically multiply the amount when it has a default amount.
Test plan:
1) Apply the patch
2) Create multiple charge types some with default amount and some without default amount
1-1) Go to Administraion -> Debit types
1-2) Click on New Debit types
1-3) Fill the form check the "Can be manually invoiced?" field
1-5) Click on save
3) Create a manual invoice
2-1) Find a patrons
2-2) Click on Accounting tab
2-3) Click on Create manual invoice tab
2-4) Select a type with default amount set
->Cost field and Quantity field should be added to the form
2-5) Edit the Cost field or Quantity field
->The amount will be automatically calculate
2-6) Select a type with no default amount set
->Cost field and Quantity field should not be added to the form
Signed-off-by: Kristi Krueger <kkrueger@cuyahogalibrary.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch moves the PatronSelfRegistrationAdditionalInstructions system
preference into HTML customizations, making it possible to have
language- and library-specific content.
To test you should have some content in the
PatronSelfRegistrationAdditionalInstructions system preference before
applying the patch. Apply the patch and run the database update process.
- In the staff client, go to Tools -> HTML customizations and verify
that the content previously in the
PatronSelfRegistrationAdditionalInstructions preference is
now stored there.
- The HTML customization entry form should offer
PatronSelfRegistrationAdditionalInstructions as a choice under
"Display location."
- Go to Administration -> System preferences and enable
"PatronSelfRegistration." Set "PatronSelfRegistrationVerifyByEmail"
to "Don't require."
- Go to the OPAC and click "Register here."
- Submit a new registration and confirm that the content that was
previously stored in the system preference is shown correctly on the
registration confirmation page.
- Update and reinstall active translations (for instance fr-FR):
- cd misc/translator/
- perl translate update fr-FR
- perl translate install fr-FR
- Enable the translation if necessary under Administration -> System
preferences -> language.
- Enable the "opaclanguagesdisplay" preference if necessary.
- Edit the PatronSelfRegistrationAdditionalInstructions HTML
customization and add unique content to the "fr-FR" tab.
- Go to the OPAC and switch to your updated translation.
Complete the online registration process again to confirm that the
content you added for your translation shows up correctly on the
confirmation page.
- Go to Administration -> System preferences and confirm that the
PatronSelfRegistrationAdditionalInstructions preference has been
removed.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch moves the OPACResultsSidebar system preference into HTML
customizations, making it possible to have language- and library-specific
content.
To test you should have some content in the OPACResultsSidebar system
preference before applying the patch. Apply the patch and run the
database update process.
- Go to the OPAC and perform a catalog search.
- Confirm that the content in the sidebar under the search facets,
which was previously in the OPACResultsSidebar system preference, is
still displayed.
- In the staff client, go to Tools -> HTML customizations and verify
that the content from OPACResultsSidebar is now stored there.
- The HTML customization entry form should offer OPACResultsSidebar as
a choice under "Display location."
- Update and reinstall active translations (for instance fr-FR):
- cd misc/translator/
- perl translate update fr-FR
- perl translate install fr-FR
- Enable the translation if necessary under Administration -> System
preferences -> language.
- Enable the "opaclanguagesdisplay" preference if necessary.
- Edit the OPACResultsSidebar HTML customization and add unique content
to the "fr-FR" tab.
- Go to the OPAC and switch to your updated translation. Perform
another catalog search to confirm that the content you added for your
translation shows up correctly.
- Go to Administration -> System preferences and confirm that the
OPACResultsSidebar preference has been removed.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch moves the OpacMaintenanceNotice system preference into HTML
customizations, making it possible to have language-specific content.
The patch modifies the OPAC maintenance page template so that the
language selection menu can be shown correctly according to the
OpacLangSelectorMode preference.
To test you should have some content in the OpacMaintenanceNotice
system preference before applying the patch. Apply the patch and run the
database update process.
- In the staff client, go to Tools -> HTML customizations and verify
that the content from OpacMaintenanceNotice is now stored there.
- The HTML customization entry form should offer OpacMaintenanceNotice
as a choice under "Display location."
- Update and reinstall active translations (for instance fr-FR):
- perl misc/translator/translate update fr-FR
- perl misc/translator/translate install fr-FR
- Enable the translation if necessary under Administration -> System
preferences -> language.
- Enable the "opaclanguagesdisplay" preference if necessary.
- Enable the "OpacMaintenance" system preference.
- Edit the OpacMaintenanceNotice HTML customization and add unique
content to the "fr-FR" tab.
- Try to view any page in the OPAC. You should see the content you
added to the OpacMaintenanceNotice HTML customization.
- Switch to your updated translation. The page should redisplay with
your translated content.
- Go to Administration -> System preferences and search for
"OpacMaintenanceNotice." The search should return no
results.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
In the patrons lists, it's only possible to delete on list at a time. This patch add the possibility to select lists and delete them at once.
TEST PLAN
1. Apply the patch.
2. Create at least 2 patron lists (Navigate to Tools > Patron lists > New patron list).
3. Select the lists you want to delete.
4. Click the "Delete selected lists" button.
5. Confirm that the selected lists have been deleted.
6. Ensure that the button cannot be used if no list is selected.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To test:
1. Create enough holds on items so that they will appear on the holds ratio report.
2. Visit circ/reserveratios.pl by going to Circulation > Holds ratios
3. No collection column.
4. Apply patch and restart services
5. Look again at circ/reserveratios.pl, now you should see a collection column.
6. Ensure that the data in the column looks correct.
7. Go to Administration > Table settings to ensure you can hide that column, and other columns in the table.
Signed-off-by: Andrew Fuerste-Henry <andrewfh@dubcolib.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kelly <kelly@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch allows every library to define the From and Reply-to email addresses for acquisition and serial emails (orders and claims) sent by Koha.
Especially in large libraries with dedicated acquisition departments we need a way that vendors/booksellers can reply directly to the acquisition team and not to the library default email. The library email in the library configuration can then be used for circulation purposes only.
1) Apply patch, run database update
2) Make sure you have set up Koha to send up email (SMTP server, KohaAdminEmailAdress, etc.)
3) Make sure you have a vendor set up with a valid email address.
4) Check that you have four new system preferences:
- AcquisitionsDefaultEMailAddress
- SerialsDefaultEMailAddress
- AcquisitionsDefaultReplyTo
- SerialsDefaultReplyTo
5) Check that there is no change in behaviour if the four new system preferences are left empty:
All acquisition and serial emails are sent from the library email (or KohaAdminEmailAddress if no library email is set)
6) Create an order with at least one order line. Send the order to your vendor by email.
7) Create an acquisition claim notice and send it to your vendor.
8) Create a subscription linked to your vendor and with at least one late issue. Claim the issue.
9) There should be no change in behaviour: emails should be sent from library email (or KohaAdminEmailAddress if nothing is set on library level)
10) Configure different email addresses for system preferences:
- First email address: AcquisitionsDefaultEMailAddress, SerialsDefaultEMailAddress
- Second email address: AcquisitionsDefaultReplyTo, SerialsDefaultReplyTo
11) Repeat steps 6-8
12) Verify that the library specific acquisition and serial email addresses are used as From and Reply-to.
Sponsored-by: Karlsruhe Institute of Technology (KIT)
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
* to include 'authorised value' in text
* to keep sentences on one line (translation)
* to use sentences instead of just links in some places
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To test:
1. Apply patch and look at the descriptions of the following system preferences. Make sure each link works and makes sense:
DefaultLongOverdueChargeValue
DefaultLongOverdueLostValue and DefaultLongOverdueDays
DefaultLongOverdueSkipLostStatuses
UpdateItemWhenLostFromHoldList
NewItemsDefaultLocation
UpdateItemLocationOnCheckin
SkipHoldTrapOnNotForLoanValue
UpdateNotForLoanStatusOnCheckin
Reference_NFL_Statuses
ItemsDeniedRenewal
Signed-off-by: Catrina <catrina@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch modifies the automatic item modification by age page so that
the rule entry form sorts <select>s alphabetically, making it easier to
find the entry you need.
The [% FOR field IN... %] directives now include the "sort" method, e.g.
[% FOR field IN agefields.sort %]
To test, apply the patch and go to Cataloging -> Item modifications by
age
- Click the "Add rules" button, then the "Add rule" button.
- Check the "Age field," "Conditions," and "Substitutions" dropdowns to
confirm that the choices are listed alphabetically.
- Fill in the form and save the rule.
- Go back and edit the rule you created. Check that the dropdowns are
still correct.
Signed-off-by: Andrew Auld <andrew.auld@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds a enw system preference SCOLoadCheckoutsByDefault
When enabled, a patron's list o fcurrent checkouts will be loaded when the sign in to the SCO
module. If disabled, they will see link to load their checkouts. In either case, a new section
is added to the SCO to show a brief display of the last checked out it
To test:
1 - Enable WebBasedSelfCheck system preference
2 - Browse to:
http://localhost:8080/cgi-bin/koha/sco/sco-main.pl
3 - Sign in the SCO user (or enable AutoSelfCheck)
4 - Sign in as a user with several items checked out
5 - Confirm you see a list of items checked out
6 - Apply patches, updatedatabase, restart_all
7 - 'Finish' and login patron to SCO again
8 - Confirm you still see the list
9 - 'Finish'
10 - Chenge the system preference
11 - Sign in to SCO, confirm checkouts do not load
12 - Confirm you see 'Load your checkouts' link
13 - Check an item out
14 - Confirm you see the last checkout, but not a list
15 - Attempt to checkout an item that cannot be checked out
16 - Confirm "Return to account summary" does not load checkouts
17 - Click "Load your checkouts"
18 - Confirm they load
19 - Check out another item, confrim they remain and are updated
20 - Checkout an item that cannot be issued
21 - Confirm 'Return to account summary' loads the checkouts again
Signed-off-by: Andrew Auld <andrew.auld@ptfs-europe.com>
Signed-off-by: AndrewA <andrew.auld@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To test:
1. APPLY PATCH
2. Add a materials specified message to an item. ( 952$3 )
3. Add the following CSS to your IntranetUserCSS:
.mats_spec_label { color: white; background: purple; }
.mats_spec_message { color: white; background: green; }
4. Checkout that item. Notice the message should be green and the label (Note about the accompanying materials:) should be purple.
5. Check in that item. Notice the message should be green and the label (Note about the accompanying materials:) should be purple.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch makes minor updates to the CSS and markup of the vendor
detail page so that the different page sections have the correct
margins.
To test, apply the patch and rebuild the staff interface CSS.
- In Acquisitions, locate a vendor and add at least one contract if
necessary.
- View the vendor details page. Each section (Vendor details, Ordering
information, Contracts) should have comfortable and consistent
margins.
Signed-off-by: Caroline Cyr La Rose <caroline.cyr-la-rose@inlibro.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch cleans out the print media css rules that were originally
added for modalprinting. The window.open method is simpler to maintain
and will more reliably print modal content as expected.
We factor out the printer code into it's own JS asset that we can apply
to other printable modals and then use it in the two existing places
where such modals have been defined already (cashup summary and bundle
confirmation).
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To test:
1. Have POS on.
2. Have some registers and items for sale. Make some sales to 'Cashup'.
3. If you have enough enough lines in the table so that 'register.pl' would print on 2 or more pages, the summary will be duplicated that same number of time.
If you are lazy like me and don't want to make that many transaction you can also add some content to the page like this:
for (let i = 0; i < 100; i++) {
$('#register').append('<h1>TEST</h1>');
}
4. APPLY PATCH, clear browser cahche
5. Try printing again, you should only get one cashup summary when printing.
Signed-off-by: Juliet Heltibridle <jheltibridle@rcplib.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
1. Create some PA_CLASS authorized values.
2. Create some custom patron attributes and add them to the newly created PA_CLASS's.
3. Set CollapseFieldsPatronAddForm to collapse 'Additional attributes and identifiers'.
4. Go to a new or existing patron record.
5. At the top of the page click the checkbox for "Show collapsed fields:".
6. Scroll down to that section and notice the PA_CLASS <legend> element is shown but not the individual patron attributes within that PA_CLASS.
7. Apply patch
8. Try again, the Additional attributes and identifiers fieldset should display properly.
Signed-off-by: Brendan Lawlor <blawlor@clamsnet.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch fixes some inconsistencies in the budget and fund
administration templates, making sure the page title, breadcrumb
navigation, and page headers are consistent with each other.
Other changes: Bootstrap tooltips have been enabled in a few places
where the markup showed intent for the tooltips to be active but where
the JS was not being initiated.
Some translation imrovements have been added where budget planning
strings could be improved with context:
'<span>by months</span>' ->
'[% tp("Budget planning", "by months") | html %]'
To test, apply the patch and go to Administration -> Budgets. Test each
of these cases:
- Budgets list
- New budget
- Edit budget
- Duplicate budget
- Close budget
- Close a budget with and without unreceived orders.
- Delete budget
- Test the delete button on a budget which has funds attached to
confirm that the menu item is disabled and a tooltip shows with an
explanation.
- Delete a budget which has no funds attached.
- Add fund
- Test the add fund button on a budget which is locked. The menu
item should be disabled and it should show a tooltip, "Budget is
locked."
- Test the add fund page for a budget which is not locked.
- Click the name of a budget with funds attached to see the funds view
- In this view, if the budget is locked, the "New" toolbar menu
should have a disabled "New fund" item with a Bootstrap tooltip.
- While viewing the funds on a budget, test the "Planning" button to
confirm that the view of each planning type.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Currently it is not possible to use the No fund option as the dropwdown will default to the first budget in the list. This patch re-adds this option so that the defaulting behaviour is fixed
Test plan:
1) Go to a vendor record in Acquisitions and then Receive Shipment
2) Enter an invoice number
3) Leave the Shipping cost empty and Shipping Fund as 'No fund'
4) Receive some orders or go straight to Finish receiving
5) Notice the Shipping fund has defaulted to the first fund in the alphabetical list of funds. It is not possible to select 'No fund' and the selected fund is recorded in shipmentcost_budgetid incorrectly.
6) Apply patch
7) Repeat steps 1-5 and this time the No fund option should be used correctly
Signed-off-by: Georgia Newman <g.newman@arts.ac.uk>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds two unit tests to cover the integration with the Counter Registry API in the Usage Statistics module. This is to prevent regressions caused either by changes to the Koha endpoint, or by changes to the Counter Registry API that might require changes in Koha to handle.
Test plan:
1) prove t/db_dependent/api/v1/erm_counter_registries.t
2) prove t/db_dependent/api/v1/erm_sushi_services.t
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This comment was breaking gulp po:update on D11
koha-tmpl/intranet-tmpl/prog/js/vue/components/ERM/LicensesShow.vue:82: warning: unterminated string
Aborted (core dumped)
at ChildProcess.exithandler (node:child_process:419:12)
at ChildProcess.emit (node:events:514:28)
at ChildProcess.emit (node:domain:552:15)
at maybeClose (node:internal/child_process:1091:16)
at Socket.<anonymous> (node:internal/child_process:449:11)
at Socket.emit (node:events:514:28)
at Socket.emit (node:domain:552:15)
at Pipe.<anonymous> (node:net:323:12)
at Pipe.callbackTrampoline (node:internal/async_hooks:130:17)
[19:23:07] 'po:update' errored after 1.14 s
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To test:
1. Apply patch and regenerate CSS. (https://wiki.koha-community.org/wiki/Working_with_SCSS_in_the_OPAC_and_staff_interface)
2. Turn on EnableAdvancedCatalogingEditor.
3. Go to cataloging > 'New record'
4. In the upper left notice a new toggle switch labeled 'Editor:'.
5. Try toggling the switch back and forth to move between editors. Verify it works correecly.
6. Try editing an existing record and make sure the toggle works well when editing records.
7. Try the other method of switch editors, Settings > Switch to basic/advanced editor. Make sure it works the same as always
8. Turn off EnableAdvancedCatalogingEditor, make sure the toggle button is no longer present.
Signed-off-by: Eesther <esther@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Sponsored-By: Toi Ohomai Institute of Technology, New Zealand
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Updates the column heading on the table of uploaded transactions
to read "Card number or username".
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch moves the override button up one level into the list of noissues in order to allow
overriding any blocking status
To test:
1 - Log in to Koha with a user with force_checkout permission (superlibrarian ok too)
2 - Mark a patron as expired, lost card, gone no address
3 - Go to 'Check out' page for the patorn
4 - Note you cannot override the restrictions
5 - Add a manual restriction/debarment
6 - Go to checkout again, now you can override
7 - Remove the debarment
8 - Add manually ot URL of checkout page '&foreallow=1'
9 - Note you can now override the other restrictions
10 - Apply patch
11 - Reload patron
12 - Note you now see the override button on the check out screen
13 - Add a debarment
14 - Confirm the button is still there
15 - Confirm overriding allows the checkout (with or without a debarment)
Signed-off-by: Matt Blenkinsop <matt.blenkinsop@ptfs-europe.com>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch makes several markup corrections to the Point of Sale page,
fixing duplicate ids, invalid "selected" attributes*, a broken comment
tag, and an invalid "href" attribute.
* The "selected" attribute in this template is on a disabled <option>,
so it can't be selected.
The patch also changes <div class="action"> to <fieldset class="action">
for consistency and better layout.
It makes some changes to the "Payment received" dialog in order to
improve visual consistency.
To test, apply the patch and make sure the EnablePointOfSale preference
is turned on.
- Go to Point of Sale.
- Test the process of adding items for purchase and collecting payment.
- After you submit the payment the confirmation dialog should look
correct, and the "Print" and "Email" buttons should both work
correctly.
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To test:
1. Create a Statistical Patron
2. Check out an item to the Stat Patron, that is checked out to another user
3. See that the local use is recorded, but the item does not get checked in
4. Check out an item that has a lost status and note that the local use is recorded, and the lost status is cleared.
5. Item is NOT checked in
6. Apply patch
7. Repeat steps 2 - 4. Item is checked in.
8. Set BlockReturnOfLostItems to Block.
9. Have a checkout to another patron then mark it as lost.
10. Check it out to the Statistical Patron. You should see the message "Item was lost, cannot be returned."
12. Conform the item remains on the patron's account.
13. Turn off BlockReturnOfLostItems, check out the same item to the Statistical Patron. You should see a message "Item was lost, now found."
14. Conform the item was actually checked in.
15. Set BlockReturnOfWithdrawnItems to Block.
16. Have a checkout to another patron then mark it as withdrawn.
17. Check it out to the Statistical Patron. You should see the message "Item was withdrawn, cannot be returned."
18. Conform the item remains on the patron's account.
19. Turn off BlockReturnOfWithdrawnItems, check out the same item to the Statistical Patron. You should see a message "Item was withdrawn."
20. Conform the item was actually checked in.
21. Have an item on a regular patron account that has a hold on it.
22. Check it out to the Statistical Patron
23. See the message "Item on hold, please checkin."
24. Have an item on a regular patron account that has a claim return on it.
25. Checkit it out to the Statistical Patron.
26. See the message "Item claimed returned, please checkin."
27. Have an item on a regular patron account that has been recalled.
28. Checkit it out to the Statistical Patron.
29. See the message "Item can fill a recall, please checkin."
Signed-off-by: Emily Lamancusa <emily.lamancusa@montgomerycountymd.gov>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
