So far we only record the number of claims and the date of the last
claim, in the aqorders table.
To keep track of the different claim dates, this patchset is going to
make the following DB changes:
* Create a new table 'aqorders_claims' (id, ordernumber, claimed_on)
* Remove the two columns from the aqorders table: claims_count and
claimed_date
This will allow to display the different claim dates where needed: on
the late orders page, and the basket page.
To avoid additional fetches of Koha::Acquisition::Orders, GetLateOrders
has been moved to Koha::Acquisition::Orders->filter_by_late
That way we are going to add consistency, robustness, and cover the
feature with new tests.
Test plan:
0/ Create a bunch of new orders. Make sure they are from different
vendor (with different delivery time).
1/ Go to the late orders page and claim some orders
2/ Reclaim some of those orders
3/ Confirm that you can see the different claim dates for a given orders
(the history of the late orders claims is kept and displayed)
4/ Bonus point: Regression tests:
a. Modify the closedate of the basket in the database. That
will allow you to make sure the patch set did not introduce regressions.
It would be good to test the different filters on the late orders page:
* delay
* Estimated delivery date from/to
* Vendor
b. Confirm that the subtotal and the total values from the late orders
page is correct.
c. Test the update database entry: do not apply these patches, claims
some orders against master. Apply the patch, execute the update DB entry
then confirm that the number of claims is correct (note that the dates
will not as it is not possible to guess them).
QA note: the branchcode parameter has been removed from filter_by_late.
At first glance it seems that it was not used.
Sponsored-by: Cork Institute of Technology
Signed-off-by: Angela O'Connor Desmond <angela.oconnordesmond@staff.ittralee.ie>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
... instead of issue and return.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
TO TEST:
1. Have a patron with some fines on an item. Try accruing fines.
2. Go to the accounting tab and look at both the Tranaction tab and Make a payment Tab
3. No Issue Date
4. Apply patch
5. Check those tabs again and see the issue date displays.
6. Go to column configuration and try to hide the issuedate, make sure it hides properly. Try this for both tables. Also make sure other columns hide properly.
7. Sign off!
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
The date accessioned column in the items table was not
configurable in the columns settings.
To test:
- Make sure the Date accessioned is shown in the column list
on both tables
- Make sure that configuring it via Adminitration > Configure
columns works as intended
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
To test:
1 - Apply patches
2 - View biblio details in staff client
3 - Should be able to toggle columns
4 - Go to admin columns settings
5 - Change some settings, verify they work
6 - Enable SeparateHoldings
7 - Go to a record that has holdings from 2 different branches
8 - Change some settings, verify they work.
9 - Check the Other Holdings Tabs, change some settings make sure they work.
10. - Test all the dataTable functions like the search box, columns, export. make sure they on both tabs
Signed-off-by: Sally <sally.healey@cheshiresharedservices.gov.uk>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch adds a new inc file to process
and translate plannig sections
To test:
1) Apply patch
2) Create new language files
(cd misc/translator; ./translate create xx-YY)
3) Verify new file is taken into account in
translation files
egrep -n budget_planning misc/translator/xx-YY*.po
check new strings in staff-prog file
4) Go to Administration > Budgets > Founds > Planning
select different options, check page title and
'Planning for...' phrase
5) Translate strings, install new language, enable it,
verify the text change with options like point 4)
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
With Timeformat system preference set to 12 hours format:
Prior to 19.05.08, when due date was specified at checkout,
the time in the box would show in 24hr format (e.g. 15:59)
while the due date in the patron's checkouts would show
in 12hr format (e.g. 3:59 PM).
After 19.05.08, the format in the specify a due date box
shows in 24hr format and the due date in 12hr format
(in patron checkouts) as before.
But when checking out multiple items using the specify due
date option for the session, the time changes from PM to
AM.
To test:
- Check out an item with specified due date 15:50 PM
- Check out a second item in same transaction
- Verify date changed to AM
- Apply patch
- Repeat
- Verify this time the date is kept as set
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kelly McElligott <kelly@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Same as the precedent patch for patron's modification
Test plan is identical but with an existing patron
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This is still not ideal but brings a bit of enhancement.
One possible problem is that the patron creation will fail if the
streetnumber field is too long (borrowers.streetnumber is varchar(10).
Test plan:
0. Don't apply this patch
1. Create a new patron with a streetnumber longer than 10 characters
2. Save
=> The patron has not been created and the app explodes
The error is about extended_attributes and not meaningful
Can't call method "extended_attributes" on an undefined value at /kohadevbox/koha/members/memberentry.pl line 560
3. Apply the patch
4. Repeat 1. and 2
=> You get a warning on the interface and you still see the creation
form
5. Check the logs
=> The error is meaningful
"Data too long for column 'streetnumber'"
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
To test:
1 - Enable AdvancedCatalogingEditor
2 - Add some macros (they don't need to be valid, just have content)
3 - Apply patches
4 - updatedatabase
5 - Set user to have 'create_shared_macros' and 'delete_shared_macros'
6 - Load the advanced editor (Cataloging->Advanced editor)
7 - Click on 'Macros'
8 - Previous macros should not show, but you should have a 'Convert' button
9 - Convert old macros and confirm they show
10 - Edit the macros, changing content and the public checkbox, confirm 'Saved' shows in the top right of editor when updating
11 - Have at least on valid macro and run it, e.g.:
new 100=Testing this out
12 - Run the macro, confirm it runs
13 - Try a macro with gibberish, confirm there is an error when running
14 - Ensure you have a few macros marked public
15 - In a private browser window sign in as a patron with neither shared macro permission
16 - Confirm the public macros load, but cannot be edited
17 - Grant create_shared_macros permission to this patron
18 - Reload editor, they should now be able to edit shared macros
19 - Confirm they cannot delete shared macros
20 - Grant delete_shared_macros permission
21 - Reload editor
22 - Confirm they can now delete shared macros
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Heather Hernandez <Heather_Hernandez@nps.gov>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This new patch set is adding a new DB field is_system to distinguish
internal categories.
The list of internal categories is in the patch "DB changes - set
is_system for categories" and can be discussed/extended.
Test plan:
0.
- Apply patch
- updatedabase
1.
- Create a new AV category
- Create an authorised value
- List the AVs for this category
- Remove all the AVs for this category
=> You see 2 buttons "Add a new authorised value" and "Delete category
'XXX'"
- Click the delete button
=> You get a popup
- Accept
=> The category is deleted
2.
- List the AV for Asort1 (internal category)
/cgi-bin/koha/admin/authorised_values.pl?searchfield=Asort1
- Delete the AVs for this category (if there is any)
=> You do not see the "Delete category" button
3.
- Create a new AV category 'foo'
- Create an authorised value
- Hit /admin/authorised_values.pl?op=delete_category&categor_name=foo
=> You get an error message (expected because the category cannot be
deleted if it has AV linked)
=> message text:
=> An error occurred when deleting this authorized value category. Check the logs.
4.
- Hit /admin/authorised_values.pl?op=delete_category&categor_name=Asort1
=> You get an error message (expected because the category Asort1 cannot
be deleted, it's an internal category.
=> message text:
=> An error occurred when deleting this authorized value category. Check the logs.
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Use of patron-title.inc on the checkin page is inconsistent, resulting
in patron names being displayed differently under different
circumstances. This patch makes it more consistent.
To test, apply the patch and check in items with the following statuses:
- On hold for a patron at your library
- On hold for a patron not at your library
- On hold and already marked 'Waiting'
- On hold while HoldsAutoFill preference is enabled
- An item which has been marked with a LOST status in the
'ClaimReturnedLostValue' system preference.
- An item which was checked out to a manually-restricted patron and
checked in with a back-dated checkin date. See test plan on Bug
24776.
Signed-off-by: Sally <sally.healey@cheshiresharedservices.gov.uk>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
When paying or writing off a single line from the list of pending charges,
the account type displayed the code instead of the description.
And when bug 23483 fixed the display of the description, 2 variables where
missed. This change is only visible when looking at the page source:
<input type="hidden" name="description" id="description" value="" />
With the patch applied, the value will be filled with the description.
To test:
- Create one or more manual invoices of different types
- Try to pay/write off using the buttons within the table
- Verify the account type shows as code, not description
- Apply patch
- Repeat
- Bonus points: Check the source code for the hidden input with description.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch builds on Bug 22318 to move the OpacMainUserBlock system
preference into the Koha news system, making it possible to have
language- and library-specific content.
To test you should have some content in the OpacMainUserBlock system
preference. Apply the patch and run the database update process.
- Go to the OPAC and confirm that the content which was previously in
the OpacMainUserBlock system preference now displays correctly where
it was before.
- In the staff client, go to Tools -> News and verify that the content
from OpacMainUserBlock is now stored in news items. There should be
one entry for each of the enabled translations in your system, for
instance 'opacmainuserblock_en', 'opacmainuserblock_fr-FR',
'opacmainuserblock_cs-CZ'
- Go to Administration -> System preferences and confirm that the
OpacMainUserBlock preference has been removed.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch fixes a simple typo
Test plan:
1) Go to Administration -> MARC bibliographic framework
2) Select a framework and add plugin unimarc_field_130.pl to 130 field
3) Open cataloguing screen
4) Go to 130 field and check if for subfield a shows value for
'unknown' select it and close the window, check on value on 130$a at
position 8 to have the value 'd'.
5) Repeat step 4 and select the value 'mixed emulsion' close the plugin
window and check at position 8 to have the value 'u'
6) Apply the patch
7) Go to field 130, open the plugin window and select value 'unknown'
close the window and check at position 8 to have the value 'u'
8) Go to field 130, open the plugin window and select value 'mixed
emulsion', close the window and check at position 8 to have the
value 'v'
https://www.ifla.org/files/assets/uca/unimarc_updates/BIBLIOGRAPHIC/b_130_update2017.pdf
Mentored-by: Andreas Roussos
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Home Library -> Home library
Holding Library -> Holding library
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Test plan:
1. Create a course (disabled)
2. Add a reserve to this course for an item and set a homebranch
different from the item's homebranch
3. Enable the course
4. Verify that the item's homebranch has changed
5. Disable the course
6. Verify that the item's homebranch was reset to its initial value
7. prove t/db_dependent/CourseReserves/CourseItems.t
Sponsored-by: Université de Lyon 3
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Sonia Bouis <sonia.bouis@univ-lyon3.fr>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch adds the ability for logged-in patrons to add star ratings to
titles in their list of current checkouts and on the reading history
page.
The reading history page previously only showed existing ratings. Now it
will allow the entry of ratings as well.
The JS and markup for the feature are in separate include files to
facilitate re-use. It includes markup for non-js display of ratings and
js-driven ratings controls.
To test, apply the patch and set the OpacStarRatings to all, "results,
details, and user" pages.
- Log in to the OPAC as a user with checkouts.
- On the "your summary" page, test the features of setting star
ratings:
- Any title with existing ratings should show the rating and the
average rating number.
- Set a rating. Confirm that it shows a message with your rating.
- Click the "cancel rating" link, and confirm that your rating is
removed.
- Set a rating and reload the page. Confirm that the rating was
saved.
- Test the "cancel rating" link on the title you set before you
reloaded the page. The rating should be cancelled.
- Test the same functionality on the "your reading history" page.
- Test these pages with the OpacStarRatings preference set to "only
details" or "no." The pages should function correctly.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
To test:
1 - Enable SMS using the Email driver
2 - Add an SMS provider under admimistration
3 - Add an SMS number and provider to a patron
4 - Note on the patron details you don't see the provider :-(
5 - Apply patch
6 - Reload
7 - Note you do see the provider :-)
8 - prove t/db_dependent/Koha/Patrons.t
9 - Sign off!
Signed-off-by: Lisette <lisetteslatah@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This test plan applies to the basic editor only
To test:
1 - Edit an existing record
2 - Click 'Z3950 Search'
3 - Note the confirmation box
4 - Add a new record
5 - Click 'Z3950 Search'
6 - Note no popup
7 - Apply patch
8 - Edit existing record
9 - Note button now says 'Replace record via Z3950 search'
10 - Add a new blank record
11 - Note the button says 'Z3950 search'
12 - Confirm editing/saving/replacing works as in the past
Signed-off-by: Phil Ringnalda <phil@chetcolibrary.org>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch fixes the call to show the patron expiry date
on the Details page when the patron is soon to expire.
Test plan:
0. Do not apply patch yet
1. Create a patron
2. Set patron's date expiry to 3 days from today
3. Go to Details tab
4. Note message "Expiration: Patron's card will expire soon.
Patron's card expires on Renew or Edit details"
5. Apply patch
4. Note message pattern "Expiration: Patron's card will expire soon.
Patron's card expires on XX/XX/XXXX Renew or Edit details"
Signed-off-by: Frédéric Demians <f.demians@tamil.fr>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch removes a typo in the argument to the "op" parameter
for the "Edit details" link when editing an expiring/expired patron
on the Details page.
Test plan:
0. Do not apply patch yet
1. Create patron
2. Set expiry date to 3 days from now
3. Go to Details tab in patron record
4. Click "Edit details" in "Library use" section
5. Note the form is blank and has no patron data in it
6. Apply the patch
7. Reload the Details page in patron record
8. Click "Edit details" in "Library use" section
9. Note the form now contains your patron data and will
work for editing the details
Signed-off-by: Frédéric Demians <f.demians@tamil.fr>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch adds more corrections missed in the first patch:
- Tools -> Patron clubs (in the Clubs table)
- Circulation -> Article requests (removed a couple of divs made
redundant by the re-used BLOCK)
- Tools -> Plugins home
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Incorrect markup surrounding Bootstrap dropdown buttons causes display
problems with the buttons are in a DataTable. Dropdown wrapper <div>s
must have a "btn-group" class.
To reproduce the problem, look at the MARC bibliographic frameworks
page. The "Actions" menu when triggered will not line up with the
button.
In almost all cases, dropdown buttons inside tables should also have the
"dropup" class on their wrapper so that the menu appears above the
button. This prevents the menu from disappearing off the bottom of the
window when the button is positioned low in the viewport.
To test, apply the patch and test the button menus in tables on the
following pages:
- Acquisitions -> Invoices
- Acquisitions -> Add to order -> From external source -> Results
- Acquisitions -> Suggestions
- Administration -> Budgets
- Administration -> Funds
- Administration -> Authority types
- Administration -> Authority types -> MARC structure
- Administration -> MARC bibliographic frameworks
- Administration -> MARC bibliographic frameworks -> MARC structure
- Administration -> OAI sets configuration
- Administration -> Z39.50/SRU servers
- Authorities -> Authority search results
- Authorities -> New from Z39.50/SRU -> Search results
- Cataloging -> Edit items
- Cataloging -> New from Z39.50/SRU -> Search results
- Circulation -> Article requests
- Reports -> Saved reports
- Tools -> Patron lists
- Tools -> Rotating collections
- Serials -> Serials search results
Signed-off-by: Phil Ringnalda <phil@chetcolibrary.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Test plan:
Pre-patch
1 - Go to the main Authorities page, search for any authority, click
the Actions menubutton and choose Edit
2 - Note the button saying Z39.50 search
3 - Note the modal alert forcing you to click it
4 - Cancel and cancel again, and in the New authority menubutton choose
Default
5 - Click the button saying Z39.50 search again, note that it warns you
about replacing your totally blank record
Apply this patch
6 - Edit an existing authority, note the button says "Replace record via
Z39.50/SRU search"
2 - Click the button, verify it still opens the search window with the
main entry of the record filled in without an alert
3 - Create a new authority, note the button says "Z39.50/SRU search"
4 - Click the button, verify it still opens the search window but
without an alert
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
When viewing a patron if you click the 'Modification log' tab you are presetned with both their circulation and members logs:
https://staff.arcadiapl.bywatersolutions.com/cgi-bin/koha/tools/viewlog.pl?do_it=1&modules=MEMBERS&modules=CIRCULATION&object=152309&src=circ
However, in bug 19791 the modules were locked to 'MEMBERS' if the src=circ
We need to add CIRCULATION in as well
Test plan:
For master follow the test plan on bug 25250.
Bug 24982 is not in stable branch, so test plan for stable branches:
1. Modify a patron, add them a fine, and do a checkout
2. Click the "Modification logs"
=> You see the Patrons and Circulation logs
3. Click submit
=> You see all patron logs only
4. Apply this patch
5. Click the "Modification logs"
=> You see the Patrons and Circulation logs
6. Click submit
=> You see the Patrons and Circulation logs
Signed-off-by: Frédéric Demians <f.demians@tamil.fr>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch tweaks the OpacPublic system preference description so users
don't expect, incorrectly, this syspref to disable the public API
anonymous access.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Until now, there was only "General" and "Privacy". This patch
breaks the "General" prefs up into multiple sections.
To test:
- Go to Administration > Patrons
- Verify the current state of things
- Apply patch
- Reload patch
- Verify headings make sense and groups make sense as well
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch removes the use of event attributes like "onclick" from the
serial collection template. Events are now defined in JavaScript.
To test, apply the patch and go to Serials
- Locate or create a subscription for which an item record is NOT
created when receiving.
- On the serial collection page for this subscription, test that the
"Multi receiving" button works correctly.
- For any subscription, test that the "Generate next" button works
correctly.
- In each tab, test that the "select all" and "clear all" links work
correctly and affect only that tab.
- On a subscription which has expired, test that the "Renew" button
works correctly.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
The height for each section was the height of the highest section.
Now the height is set to the length of the section.
Test plan:
Go to Administration > Column configuration
Open the sections and confirm that the height fits its content.
QA: note that I guess "autoHeight: false" was meant to achieve that,
but it does not exist in the API of the plugin.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
To test:
1) update database, restart memcached/plack
2) Go to Administration -> System preferences -> OPAC tab. Enable the
new PatronSelfRegistrationConfirmEmail system preference. Enable other
required self registration sysprefs.
3) Go to the OPAC home page. (You may need to log out). Click the
'Register' link so you are redirected to the member entry form.
4) Notice the 'Confirm primary email' field after the 'primary email'
field. Put 'a@a.com' in primary email, and 'b@b.com' in the confirm
field. Scroll to the end of the form and Submit.
5) Confirm the form is not successfully submitted, and an error message
is shown to indicate the email addresses do not match.
6) Confirm you cannot cut, copy or paste in either the primary email or
confirm primary email fields. Confirm the right click menu doesn't work
in these fields.
7) Disable javascript in your browser.
8) Repeat steps 3 and 4.
9) Confirm there is an error message to indicate the email addresses do
not match.
10) Re-enable javascript. Fill in the form correctly with matching email
addresses and confirm it successfully submits.
11) Disable the PatronSelfRegistrationConfirmEmail syspref.
12) Attempt to register an account on the OPAC again. Confirm the
'confirm email address' field is gone and form works as expected.
13) Re-enable the PatronSelfRegistrationConfirmEmail syspref.
14) Log in to the OPAC and go to your personal details
15) Edit the primary email field
16) Confirm you are able to submit your changes (you should not see an
error about emails not matching).
Sponsored-by: Bibliotheksservice-Zentrum Baden-Württemberg (BSZ)
Signed-off-by: holly <hc@interleaf.ie>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
The label creator won't be able to add a batch for items, if they are
not imported into the database (missing itemnumber). This patch hides
the link, when the status is not imported, to avoid the error situation.
To test:
- Export a record with items from your Koha installation
- Delete items and record from Koha
- Stage the record with the items - the "Create labels" link should be showing
- Try to create the labels - note error
- Apply patch
- Retry - the link should no longer show
- Import the records - the link should show now
- Create labels again - a new batch should have been created
- Verify the link on the batch # leads to the batch in the labels module
Bonus: Moves the message from the .pl file to the template to make
it translatable.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This adds a link to the accounting tab from the patron search results by
making the amount in the Fines column clickable.
To test:
- Make sure you have some patrons with fines, credits and 0,00
- Search for your patrons using the patron search, make sure you
get more than one result for your search
- Check the results table - the amount should always be linked
and lead to the patron account accounting > transactions tab.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
I believe I suggested a typo - trying to fix it here.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Sometimes librarians are creating purchase suggestions that came from patrons
which didn't use the opac (but sent an email, or told the librarian verbally...)
This patch allows the librarian to change the creator of the purchase suggestion
when entering it.
This way, the patron will be able to receive notifications during the purchase
suggestion workflow.
Test plan:
- Apply the patch
- Check that you can change the default creator of the purchase suggestion when
creating a new suggestion by clicking on 'Set to patron'
(Home > Acquisitions > Suggestions management > New purchase suggestion)
- Check that you can also change the creator of the purchase suggestion when
editing an existing suggestion
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
To test:
1 - Set SearchEngine syspref to Zebra
2 - Be a user with permission to manage search engine configuration (manage_search_engine_config)
3 - Confirm you do not see 'Search engine configuration' on Admin main page
4 - Apply patch
5 - Confirm you see it with '(Elasticsearch)' appended
6 - Be a user without above permission
7 - Confirm you cannot see the 'Search engine configuration'
8 - Confirm you cannot access directly:
/cgi-bin/koha/admin/searchengine/elasticsearch/mappings.pl
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch makes some modifications to the columns setting
administration template so that the headings are a little clearer.
In-page navigation is added for each section.
To test, apply the patch and go to Administration -> Columns settings.
- Confirm that the collapsing panels work correctly.
- Expand a section and confirm that the "jump to" links work correctly.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Looks good, works good.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch adds three new options to the staff interface catalog search
results for users with cataloging permission: batch edit, batch delete,
and merge. The choices are found in an "Edit" menu which is disabled by
default. Checking any boxes in the search results table enables the
button.
To test, apply the patch and log in to Koha as a user with
edit_catalogue permission.
- Perform a search in the catalog
- You should see a disabled "Edit" button in the toolbar at the top of
the search results table.
- Check a single checkbox. The button should become enabled.
- Test the "Batch edit" and "Batch delete" menu items. They should
work correctly.
- Test the "Merge records" item. It should warn you that you must
select at least two records.
- Check more than one checkbox and test each menu item again. All
should work as expected.
- Log in to the staff client as a user who does not have edit_catalogue
permission. The "Edit" menu should no longer appear on the search
results page.
Signed-off-by: Abbey Holt <aholt@dubuque.lib.ia.us>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
When paging through the patron account in staff, using the tabs on
the right, you notice that some pages are missing the patron toolbar
on top and that the headings, where they exist, vary in size.
This patch adds the patron toolbar to 3 more tabs and changes headings
to h1 to be consistent with older tabs. It has also been suggested on
another tab that this is preferrable for screen readers.
Note: Modification log was left out for now, as this is also used in tools.
To test:
- Activate ILL (ILLModule pref)
- Activate discharges (UseDischarge pref)
- Go to any patron account, tab through the tabs...
- Verify that discharge, purchase suggestions and ill requests are
missing the toolbar
- Apply patch
- Verify that the toolbar now appears on these pages and works
correctly
- Also veriy that the headings are now consistently h1 on all pages
Signed-off-by: David Roberts <david@koha-ptfs.co.uk>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
When using sort1/sort2 with authorised values to create a pull down
list, there will be no empty entry unless one is manually added to
the authorised values list.
This is not a good default behaviour, as it can easily
cause errors on patron creation. Without the empty entry, the first
alphabetic value is pre-selected and will be saved if not explicitly
changed. It also doesn't allow to mark sort1/sort2 as mandatory,
as the value is always 'set', the required message won't be triggered.
This adds an empty parameter to av-build-dropbox.inc to allow selectively
adding this empty entry without causing side-effects in other places
this include is used.
To test:
- Create authorised values for either Bsort1 or Bsort2 authorised
value category
- Create a new patron:
- you should see a pull down list on one and an input field for the other
- for the pull down list, there will be no empty entry and the first
alphabetic value will be preselected
- Make your sort1 and sort2 mandatory using BorrowerMandatoryField
- Verify there is still on empty entry
- Apply patch
- Repeat tests and verify that the behaviour is as expected
- There should now be an empty entry
- When the field is marked mandatory and empty is left, the required
warning will be shown.
Signed-off-by: David Roberts <david@koha-ptfs.co.uk>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
As the pref removes the whole 'line' of information, this tries to makes
the behaviour a little clearer by adding a 'and descriptions' to the pref
text. It now reads:
[Show|Don't show] the format, audience, and material type icons and
descriptions in XSLT MARC21 results and detail pages in ...
To test:
- Check both preference descriptions in the staff client
- Verify the text reads correctly and this helps things
Signed-off-by: David Roberts <david@koha-ptfs.co.uk>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This fixes the navigation on the Point of sale page:
Branch details => Library details
And the heading and the 'no register defined for this branch/library'
message on the page it links to.
To test:
- Activate cash registers and point of sales features
- Go to the point of sales page
- Verify text on the menu to the left
- Click on the Branch/library details - verify text and heading
Signed-off-by: Devinim <kohadevinim@devinim.com.tr>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Adding an item to course reserves and trying to edit any values in a second step does not work. Values are not saved and the table shows all values as "Unchanged".
This patch set adds two new sets of columns to the course_items table.
The first set determines if the specified column should be swapped or
not. The was previously 'implied' by the column being set to undef which
has been the root problem with that way of knowing if a column should
swap or not.
The second set of new columns are for storing the item field values
while the item is on course reserve. Previously, the column values
were swapped between the items table and the course_items table,
which leaves ambiguity as to what each value is. Now, the original
columns *always* store the value when the item is on course reserve,
and the new storage columns store the original item value while the
item is on reserve, and are NULL when an item is *not* on reserve.
Test Plan:
1) Apply this patch
2) Add and edit course items, not the new checkboxes for enabling fields
3) Everything should function as before
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This reverts commit 8aa9f2cc07.
I agree with the following comment and as such have reverted the patch.
Quoting Phil Ringnalda <phil@chetcolibrary.org>:
Everything currently in the chunk labelled "Self Checkout" is
preferences used to control sco-main.pl, a feature that does checkout
and renewal, and optionally with the preference AllSelfCheckReturns,
also checkin.
Everything currently in the chunk labelled "Self check-in module" is
preferences used to control sci-main.pl, a separate feature that does
only checkin, and does checkin whether or not AllowSelfCheckReturns is
set.
I'd think a better solution would be to either rename the preference,
which is actually AllowReturnsInSelfCheckout, or rename the chunks to
make it more clear that they are preferences for two different features.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch moves the AllowSelfCheckReturns system preference to the "Self check-in module" section of the Circulation system preferences.
To test:
1) Check that the AllowSelfCheckReturns system preference is currently
in the "Self Checkout" section of the Circulation system preferences.
2) Apply the patch
3) The preference should now be in the "Self check-in module" section of
the Circulation system preferences.
Signed-off-by: Devinim <kohadevinim@devinim.com.tr>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
A question in the bug report asks: Why is is necessary to change the
Bootstrap class to col-xs-12? The JavaScript which checks for the
existence of an Amazon cover image is designed to remove the Amazon
cover's container if there is none. Changing the class of
cover image column is gone.
However, the check is incorrect because it doesn't account for Local
Covers. There might be both a 1 x 1 pixel Amazon image and a local cover
image, so the layout shouldn't be changed unless there are no images
present.
To test, apply the patch and view the bibliographic details page of
various titles including:
- Amazon cover present, no local cover
- No Amazon cover, local cover image present
- Both Amazon and local cover image
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
TO RECREATE:
-Have Amazon images turned on and local images too.
-Have a record with a local cover image
-Make sure the record has no ISBN in 020 field.
-Load detail page of that record and see that the local cover images is
not on the right hand side like it should be but forced underneath
'catalogue_detail_biblio' in an odd spot.
-Apply patch and reload page
-The image should be back in its normal spot
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
We now display the descriptions everywhere, so we should drop the
'code' from labels.
This changes text in a lot of playes in Koha, including:
- The relatives checkouts table when displayed for the guarantor
- The new order and order receive forms in acquisitoins (item creation)
- The description of CCODE in the authorised values table
- The column description on results in item search
- The branch tranfers page
- Course reserves: add reserve items (one and in batch)
- Patron account > statistics tab
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
The headings/labels of sections in the sys pref editor didn't follow
Koha's capitalization rules.
To test:
- Go to Administration > System preferences
- Check all tabs for the spelling of the headings
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
It would appear one has to format the dates in the controller rather
than in the template for input fields.. I wasn't aware of this caveat
until now.
Test plan
1/ Prior to applying patch attempt to look at previous transactions
ensuring you enter a 'to' date.
2/ Note a catastrophic failure
3/ Apply patch
4/ Look at the same date range and note you no longer get a failure but
are instead faced with the requested transactions.
5/ Signoff
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
If there are more URIs, we split on vertical bar and show the real URL
instead of duplicated text. Otherwise display depends on the pref
URLLinkText.
Test plan:
Create item with uri = A | B | C
Create another item with uri = D
Check the results on staff detail view (items table).
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Test plan:
Try to create 2 AV with the same code for the same category.
You should see a warning
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Lari Taskula <lari.taskula@hypernova.fi>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Moves the updatedatabase entry to the new format and
adds information for the explanation column of the
systempreferences table.
Also slightly rephrases the description in the system preference
editor.
To test:
- Verify database update still works the same with addition
of explanations
- Verify the sys pref description makes sense
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
However we are adding a note on top of the table to tell how many
suggestions are archived. It seems that there is no good reason to
display the archived suggestions on this table.
Signed-off-by: Séverine QUEUNE <severine.queune@bulac.fr>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch adds a new "Suggestion detail" tab on the bibliographic
detail page. It will help suggestion management.
Test plan:
- Create several suggestions for a given biblio
- Go to the detail page of the bibliographic record and confirm that
there is a new "Suggestion detail" tab with all the suggestions you
created.
Signed-off-by: Séverine QUEUNE <severine.queune@bulac.fr>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch displays and let the librarian edit the suggestion.reason
information when receiving an order.
Note that if no reason was given the edit is not possible (easily
modifiable if needed but it seems that we do not want to display too
much details unnecessarily)
Test plan:
- Create a suggestion and fill the reason
- Create an order from this suggestion
- Close the basket and start receiving the order
=> The reason is displayed and editable
- Modify the reason and click Save
- Receive again
=> The reason has been correctly modified
- Play with the "Others..." option and give a specific reason
Sponsored-by: BULAC - http://www.bulac.fr/
Signed-off-by: Séverine QUEUNE <severine.queune@bulac.fr>
Signed-off-by: Bouzid Fergani <bouzid.fergani@inlibro.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch changes the wording of this system preference.
To test:
1) Check the current wording of this system preference.
2) Install the patch.
3) Check that the wording of this system preference has changed to "Delete patrons still in the category indicated by PatronSelfRegistrationDefaultCategory X days after account creation."
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
The <i> was not closed resulting in the "Archived" displaying in
the wrong font. Might be a browser specific issue, but adding the
closing </i> fixed it and follows the existing pattern.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
There are performance issues when searching suggestions if there are
thousands of suggestions.
To prevent that we are going to add the ability to archive purchase
suggestions, in order to remove them from the search list (by default).
Test plan:
0. Apply all the patches, execute the updatedatabase.pl script, restart
all
1. Create some suggestions
2. Search for them
3. Use the "Archive" action button for one of them
4. Restart the search
=> The archived suggestion does no longer appear in the list
5. Use the filter "Included archived" in the "Suggestion information"
filter box
=> The archived suggestion is now displayed
6. Use other filters
=> The "archived" filter is kept from one search to another
7. Use one of the action at the bottom of the suggestion list (change
the status for instance)
=> The "archived" filter is still kept
Sponsored-by: BULAC - http://www.bulac.fr/
Signed-off-by: Séverine QUEUNE <severine.queune@bulac.fr>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Trivial change, adding AUTH to viewlog template only.
Test plan:
Look for the Authentication log lines in viewlog.pl (intranet tools).
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jon Knight <J.P.Knight@lboro.ac.uk>
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Test plan:
Run atomic update.
Check the Logs tab of preferences.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jon Knight <J.P.Knight@lboro.ac.uk>
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
TEST PLAN:
1. Make a new news item and use the TinyMCE editor, click on the <> icon to go to the Source code editor
2. Add some HTML like <i class="fa fa-facebook-official" aria-hidden="true">TEST</i> and save it.
3. Go back in and notice that TinyMCE has changed it to: <p><em class="fa fa-facebook-official">TEST</em></p>
4. It should not auto clean up and also it should not autowrap with <p> tag.
5. Apply patch patch, and repeat step 2. Save again.
6. It should not have automatiicly changed any HTML or added any <p> wrapper.
Signed-off-by: David Cook <dcook@prosentient.com.au>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Something went wrong during a rebase of bug 13618
commit dcd1f5d48c
Bug 13618: Add html filters to all the variables
Several changes related to AddressFormat are wrong:
- [% IF Koha.Preference( 'AddressFormat' ) %]
- [% INCLUDE "member-main-address-style-${ Koha.Preference( 'AddressFormat' ) }.inc" %]
- [% ELSE %]
- [% INCLUDE 'member-main-address-style-us.inc' %]
- [% END %]
+ [% SWITCH Koha.Preference( 'AddressFormat' ) %]
+ [% CASE 'de' %]
+ [% INCLUDE 'member-main-address-style-de.inc' %]
+ [% CASE # us %]
+ [% INCLUDE 'member-main-address-style-us.inc' %]
+ [% END %]
Test plan:
Create a patron with all the address fields filled
Play with the 3 option values of AddressFormat, and confirm that the address is displayed correctly
on the patron's view, and in the patron module (top left)
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
There is a "Suggestions pending approval" link on the main page that is
displayed if there are new suggestions and the logged in user has the
permission to manage them.
On bug bug 22868 the permission changed from
acquisition.suggestions_manage to suggestions.suggestions_manage
But in the template, one occurrence has not been replaced correctly
(certainly because it was already wrong actually).
Test plan:
Create a suggestion at the OPAC
Create a patron with the suggestions permission
Use this patron to login at the staff interface
=> Without this patch the link does not appear on the main page
=> With this patch applied the link appears
Signed-off-by: David Roberts <david@koha-ptfs.co.uk>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
With previous renew values
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
To make this work I moved the _get_sub_length function from
subscription-add.pl to C4/Serials.pm so that the subscription-renew.pl
script could also call it to store the sublength for the appropriate
field of the subscriptions database table.
Test plan:
1. Create a subscription and notice that there is a dropdown box for sub
length containing the values: issues, weeks, months
2. Renew the subscription and notice that there are 3 input text boxes:
'number of num', 'number of weeks' and 'number of months'
3. Input a 'Number of weeks' value of 2
4. Query the subscription database table and notice that the value of 2
has been stored in the weeklength field for the subscription record you
just renewed
5. Apply the patch
6. Renew the subscription and notice that there is now a sublength
dropdown box containing issues, weeks and months
7. Set the month value to 3
8. Query the database and notice that 3 was stored in the monthlength
field for the subscription record
9. Create a new subscription and select the sub length values of issues
and 3
10. Query the database and notice that the numberlength field for the
subscription you just created is set to 3 showing that the sublength
dropbox is still working for creating a new subscription
Sponsored-By: Catalyst IT
Signed-off-by: Dilan Johnpullé <dilan@calyx.net.au>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
On commit 4494e8ba6c
Bug 23594: Batch modification for itemtypes on suggestions page
The anchors of the tabs on suggestion.pl has been replaced with
tab_$count instead of the status code.
There was a need at the time, but I cannot remember it.
I restored the previous behavior, and did not find any regressions.
Test plan:
1 - Add several suggestions to Koha
2 - Set them in different status, leaving at least one pending
3 - Go to home page, note it shows count of pending
4 - Click the link on home page
5 - It takes you to correct tab
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
It does the same thing as the 'Pay' button under 'Make a payment' tab.
It is nothing more than a shortcut.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch deals (hopefully) correctly with encoding and escaping chars.
It also remove OPACBaseURL from the url stored in DB, and readd is on
display, to avoid possible attacks.
Test plan:
Go to the authority search
fill term with something hacky
<script>alert('booh!')</script>And Ŝ♥m€ E★tr₳
Search
Click the "Report a problem" link
Fill the form and make sure the url is displayed correctly
submit
Check problem_reports.problempage in DB => Should be correctly displayed
Go to staff interface, "OPAC problem reports"
=> Confirm the link is correctly display
Click it
=> Confirm that you are at the OPAC, and the URL is correct
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
QA: We have a security issue here, we should not make this link
clickable from the staff side.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
status varchar(6) with readable statuses
borrowernumber not null default 0
hide form if message successfully sent
fixing hide viewed and hide closed filters
adding recipient column
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Test plan:
- Update database and upgrade schema files (if you haven't already).
Restart memcached
- Check your user's permissions and ensure the 'problem_reports'
permission is ticked. Confirm the OPACReportProblem syspref is enabled
- Log into the OPAC and submit a problem report
- Log into the staff client
- You should see a box at the bottom of the main page showing your
pending problem report
- Click the link and confirm it takes you to the new page for managing
problem reports
- Go to Administration
- Confirm you can see a link to 'OPAC problem reports' under the
'Additional parameters' heading
- Click 'OPAC problem reports'
- Confirm your problem report is showing in the table
- Open the OPAC in another tab and submit at least two more problem
reports (so you should have at least three in the table after
refreshing)
- Try the different buttons
- selecting multiple problem reports and using the big 'mark
viewed', 'mark closed', 'mark new' buttons. Confirm there are no
failures and that the number of selected problem reports is correct
- select all, clear all, hide viewed, hide closed, hide new, show
all
- individual 'mark viewed', 'mark closed', 'mark new' buttons for
each problem report. Confirm the status shows and the correct button
is disabled while others are enabled
- Confirm the problem page link works as expected
Sponsored-by: Catalyst IT
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Adding problem_reports table and OPACReportProblem syspref
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
When selecting partners for search during the "Place request with
partner libraries" workflow, there was no indication of which partners
could actually be searched (i.e. are attached to a Z target and enabled
for partner search). We now list them
Signed-off-by: Niamh Walker-Headon <Niamh.Walker-Headon@tudublin.ie>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
We now allow for the service to return a name that can be specified in
the plugin config. This patch switches to using that, rather than just
the plugin name defined in the plugin's metadata hashref
Signed-off-by: Niamh Walker-Headon <Niamh.Walker-Headon@tudublin.ie>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch adds the required infrastructure to enable ILL availability
plugins to intercept the request creation process and, using the
supplied metadata, search for and display possible relevant items from
whichever availability plugins are installed.
Currently three availability plugins exist:
z39.50 - Searches any number of the Koha instance's configured Z targets
https://github.com/PTFS-Europe/koha-plugin-ill-avail-z3950
EDS - Searches the EBSCO Discovery Service
https://github.com/PTFS-Europe/koha-plugin-ill-avail-eds
Unpaywall - Searches the Unpaywall API for possible open access versions
of the requested item
https://github.com/PTFS-Europe/koha-plugin-ill-avail-unpaywall
The Unpaywall plugin is intended to serve as a "reference" plugin as the
API it deals with is extremely simple
Signed-off-by: Niamh Walker-Headon <Niamh.Walker-Headon@tudublin.ie>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch adds the new syspref "ILLCheckAvailability"
Sponsored-by: Public Health England
Signed-off-by: Niamh Walker-Headon <Niamh.Walker-Headon@tudublin.ie>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
admin/add_user_search.pl sets 'patrons_with_acq_perm_only', to only
retrieve patrons with acq (order_manage) permissions.
The original bug was hidden in the existing code, but the behavior was
terrible.
To prevent patrons matching the permissions contrainst to be hidden, we
fetched ALL the patrons from the DB, then filtered them depending on
their permissions. This might have awful performance on DB with lot of
patrons.
So basically with this patch we are adding the pagination back to the
"owner/users for funds" feature, as the permission filtering is now done
at DB level.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
At the moment noItemTypeImages pref controls staff and OPAC
display. With this patch, there will be a separate OpacNoItemTypes
preference that allows to control display of each separately.
To test:
- Apply patch and run database update
In Administration:
- Search for 'noItemTypes' preferences
- Verify the settings of both prefs match
- Toggle prefs, verify everything works ok
- Go to the item types configuration page
- Try different settings for both prefs:
- Both set to No: Only a message with a link to the prefs should show
- Both set to Yes or either set to Yes: image configuration options
should show
In the OPAC:
- Check the following pages with item-level_itypes = record
- advanced search
- detail page
- place hold page
- Check the following pages with item-level_itypes = item
- result list
- a list (opac-shelves)
- checkouts and overdues tabs in patron account
(Note: this didn't work right before, but will now.)
- reading history in patron account
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Librarians should be able to define what sections in member entryfields in 'Main address',
'Contact' and 'Alternate contact' in member entry form for guarantee's are pre-filled from guarantor's record
The 'Guarantor surname, 'Guarantor first name' and 'relationship' fields
in the 'Contact' section should not be filled from guarantor patron
record as those fields are intended for guarantor's without patron
records in Koha.
Test plan:
1. On an adult patron's record (which has all fields filled out in the
'Main address', 'Contact' (Except for 'Guarantor surname', 'Guarantor
first name', and 'relationship'), 'Alternate address', and 'Alternate contact') select 'Add guarantee'
2. Observe:
* Fields in 'Main address' are all automatically pre-filled
from guarantor record
* Fields in 'Contact' (except 'Guarantor surname', 'Guarantor firstname'
and 'relationship') are all automatically pre-filled from guarantor
record
* Fields in 'Alternate address' (except for Contact note) are pre-filled from guarantor record
* None of the fields in 'Alternate contact' are pre-filled from guarantor
4. Apply patch
5. Run database updates
cd installer/data/mysql
sudo koha-shell <instancename>
./updatedatabase.pl
6. Restart plack:
sudo koha-plack --restart <instancename>
7. Go to Administration > Global system preferences and search for the
new PrefillGuaranteeField system preference
8. Observe this syspref contains checkboxes and the following are
selected by default:
Contact - Primary email
Contact - Primary phone
Main address - Address
Main address - City
Main address - Country
Main address - State
Main address - ZIP/Postal code
Main address - street number
Please note: 'Contact - Guarantor surname', 'Contact - Guarantor first
name', Contact - relationship' are not in PrefillGuaranteeField syspref
as they are for non Koha patrons and so should not be pre-filled from a Koha
patron.
9. Repeat step 1 and observe the following fields are prefilled from guarantor:
In Main address section -
streetnumber
address
city
state
zipcode/postal code
country
In Contact section -
Primary phone
Primary email
10. In the PrefillGuaranteeField syspref click '[Select all]' checkboxes
11. Repeat step 1 and observe all fields in 'Main address', 'Contact'
(except Guarantor surname, Guarantor first name, and relationship),
Alternate address and Alterate contact are filled from guarantor record.
i.e. The values in guarantor's 'Alternate address' fields fill the
guarantee's 'Alternate address' fields
12. Change a few of the prefilled field values and 'Save' and observe your changes
have been saved in addition to the unaltered pre-filled values in other
fields
13. Amend PrefillGuarantee field syspref to have no checkboxes selected
14. Repeat step 1 and observe none of the fields in Main address,
Contact, Alternate address and Alternate contact are pre-filled
15. Run tests:
sudo koha-shell <instancename>
prove xt
prove t
Sponsored-by: Waitaki Distict Council, NZ
Signed-off-by: Sally <sally.healey@cheshiresharedservices.go.uk>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
If a hold is selected from the result list, we should let the ability to
select an item-level hold.
Test plan:
I. Detail page
1/ Go to a bibliographic record detail page
2/ Click "Place hold"
3/ Select a patron
=> No change expected, you can select an item
II. Search result, multiple holds
1/ Search for an item with more than one search result
2/ Select several items, click 'Place hold'
3/ Enter a patron card number
=> No change expected, item level holds are not available.
III. Search result, single hold
1/ Search for an item with more than one search result
2/ Select only one item, click 'Place hold'
3/ Enter a patron card number
=> With this patch applied, item level hold is available. The screen is the same
as when you place a hold from the bibliographic record detail page
=> Without this patch you cannot place an item-level hold
QA notes: We could go a bit further and remove the 2 biblionumbers and
biblionumber from hold script, as well as remove the checkMultiHold in
request.tt. We should not have a biblionumbers param that contain a list
of biblionumber separated by '/' but several biblionumber parameters
instead.
QA notes 2: About placerequest.pl, see bug 19618 comment 27.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
When selecting a new hard due date, we should keep the time part of the
original checkouts.
Test plan:
1 - Checkout an item specifying a date due
2 - Checkout an item without specifying a date due
3 - Use Tools->Batch extend due date
4 - Select a hard due date
5 - On the confirmation screen you should see that the time part has
been kept
6 - Confirm
7 - Make sure the correct values hava been inserted in DB
8 - Try now using the other option, give a number of days
9 - Repeat 4-7
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch corrects an error in the structure of the authority editor
template so that repeating subfields do not generate invalid markup. The
correction was found by comparing with addbiblio.tt.
If you are viewing the diff, please note that some minor whitespace
changes have been made.
To reproduce, clone and and populate any repeatable subfield, save, and
open the authority for editing again. The clones subfield will be
formatting incorrectly, showing bullet points on each line.
To test, apply the patch and reload the authority editor showing the
record with the cloned subfield. It should display correctly.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Adding orders from subscriptions makes acquisition information visible
in the serials module. In the table of acquisition data is a link back
to the basket - but this link is missing the basket number parameter -
it doesn't work. This patch fixes the TT variable to make it work.
To test:
- Add a subscription
- Add a new basket
- Add a order line using "Add from subscription"
- Go to the subscription details page, check the acquisitions tab
- Try the link to the basket - it should not work
- Apply patch
- Try the link again - now it should bring up the basket page with
the order.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Fixes a tiny string issue: Edit Items --> Edit items
To test:
- Go to tools / batch item edit
- Enter a barcode
- Check the heading above the edit item form
- Apply patch
- Verify the heading is now properly capitalized
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
There are some ocurrences of "Call Number" in the sort option lists in
staff and OPAC. The patch changes them to "Call number".
To test:
- Check the sort option list in staff and OPAC for the typo
- Apply patch
- Verify it's now all corrected
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
In addition to checking the patron image upload permission, this
adds a check for the patronimages system preference to the tools
home page and sidebar.
To test:
- Check that the patron image upload tool only displays when
- system preference patronimages is set to 'Allow'
and user is either
- superlibrarian or
- has bath_upload_patron_images permission
- Save URL of patron image uploader page
- Turn off patronimages
- Verify you get redirected to the home page of Koha when trying
to access the page
Note: this redirect is already used by the stock rotation feature.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch adds the required line to the circulation.pref file to
dispaly the onpayment option in the MarkLostItemReturned preference
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
To test:
1 - Have some patrons in your system
2 - Export some of their info via reports
SELECT cardnumber, userid, surname, firstname, password, branchcode, categorycode
3 - Edit the file from above, changing all the password lines
4 - Import the file with overwrite
5 - Confirm passwords have not changed (run the report again and confirm the hashes are the same)
6 - Apply patch
7 - Restart all the things
8 - Check the new box on import screen to overwrite passwrods
9 - Import file again
10 - Confirm passwords have changed
11 - Signin using new password to verify the hash is the password as supplied
12 - Repeat via commandline import supplying --overwrite_passwords option
13 - Verify works as expected
14 - Prove -v t/db_dependent/Koha/Patrons/Import.t
Sponsored-by: ByWater Solutions
Signed-off-by: Ron Marion <ron.marion@goddard.edu>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
It will avoid crash and invalid data when creating/updating a
subscription.
This could have been done with a AJAX query but seems more convenient
this way.
Test plan:
- Create or update a subscription
- In the "Vendor" input try an empty string, a valid vendor's id, and
invalid one.
=> With an empty string you get the existing alert message
=> With a valid id you do not get any messages
=> With an invalid id you are not allowed to go to page 2
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch makes minor markup changes and adds some CSS so that the
module and actions checkboxes are laid out a little more clearly.
The patch includes some whitespace changes, so diff accordingly.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
So we can see all options at once, and more easily select more than one
option.
Test plan:
1) Go to Tools -> Log viewer
2) Notice the new checkboxes under Modules, Actions and Interface. 'All'
should be selected by default for all three options
3) Confirm you can deselect 'All' and the other options are enabled.
Confirm selection all of the other options automatically selects 'All'
and disables the options again.
4) Confirm the results still work as expected when clicking 'Submit'
button
Sponsored-by: Catalyst IT
Signed-off-by: Sally <sally.healey@cheshiresharedservices.gov.uk>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch rewords the 'Display in check-out' option in the patron
attribute policy
To test:
1) Apply patch
2) Go to /cgi-bin/koha/admin/patron-attr-types.pl?op=add_attribute_type
3) Check that the 8th line down has been renamed to "Display in patron's
brief information:"
4) Check the description of this same option has been changed to "Check
to show this attribute in the brief information panel in the patron's
record (staff client)."
Signed-off-by: Sally <sally.healey@cheshiresharedservices.gov.uk>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
In git installs, cronjobs live in misc, but for package installs, they
live under bin. Let's just still with 'misc/cronjobs' which is always
cromulent.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch changes the wording of the FinesMode and
CalculateFinesOnReturn system preferences explanations
1) Install Patch
2) Check that the wording of the FinesMode system preference has changed
to "NOTE: If the misc/cronjobs/fines.pl cronjob is being run, accruing
and final fines will be calculated when the cron runs and accruing fines
will be finalized when an item is returned. If CalculateFinesOnReturn is
enabled, final fines will be calculated when an item is returned."
3) Check that the wording of the CalculateFinesOnReturn system
preference has changed to add "NOTE: This system preference requires
FinesMode to be set to 'Calculate and charge.'" to the existing note.
Signed-off-by: Sally <sally.healey@cheshiresharedservices.gov.uk>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
To recreate:
1 - Create a new patron on the staff interface
2 - Note that 'Allow auto-renewal of items' defaults to 'no'
3 - Apply patch
4 - Create another patron
5 - 'Allow auto-renewal of items' defaults to 'yes'
Signed-off-by: Sally <sally.healey@cheshiresharedservices.gov.uk>
Signed-off-by: Devinim <kohadevinim@devinim.com.tr>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch changes the text of the save button on the final step.
To test:
1) Build a guided report (the selections are immaterial)
2) Note that after you have been through the six stages, the button on
the "Confirm custom report" screen should be labelled "Save"
3) Install patch
4) Repeat Step 1. Note that on the "Confirm custom report" screen, the
button is now labelled "Next".
5) Run the report to check that the functionality still works.
Signed-off-by: Sally <sally.healey@cheshiresharedservices.gov.uk>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Devinim <kohadevinim@devinim.com.tr>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Found in testing that this appears to work well for Elasticsearch -
so removing everything that made this Zebra only.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Also adding missing filters
ALSO ensuring you can switch back to library default on staff side
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch utilises an unused search facet to handle results shown per
page.
Sponsored-by: Region Halland
Signed-off-by: Gabriel DeCarufel <gabriel@inlibro.com>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch moves the click handler for patron attribute actions ("new",
"clear") from the links themselves to the container. This allows jQuery
to correctly target dynamically-created copies of the links.
To test you should have extended patron attributes enabled and you
should have some repeatable attributes defined.
- Create or edit a patron record
- In the "Additional attributes and identifiers" section, test the
"Clear" and "New" links. Confirm that the controls work with both the
original instance of the field and those created by clicking "New."
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch removes several event attributes from the patron entry form
and replaces them with event handlers in the <script> block.
Some event attributes were removed altogether because they weren't
functional: Onchange events on jQueryUI datepickers don't work, and they
would have been redundant even if they did work.
To test you should have some patron attributes configured
(Administration -> Patron attribute types). At least one attribute
should be configured to apply to one particular patron category.
Apply the patch and begin the process of adding a new patron.
1. Try to add a patron with details matching a patron which already
exists. You should get a confirmation message on screen which asks if
the patron is a duplicte. Test the link which shows the existing
record. It should trigger a popup window with details about the
patron.
2. Test the process of setting a patron's date of birth. Selecting a
date should trigger the display of the patron's age immedately below
the field.
3. Test that you cannot set a patron's expiration to a date which
precedes the date in the registration date field.
4. Test that you can add a manual restriction's expiration date, and
that the "Clear date" link works correctly.
5. Test that the "clear" and "new" controls links work with additional
attributes and identifiers.
6. Test that changing the patron's category correctly affects the
display of available attributes and identifiers: The attribute you
have associated with a particular patron category should only show if
that category is selected under "Category."
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Removes some last "remains" of INTRAdidyoumean.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
The amdin page for the "did you mean" feature has two block for setting it up in the staff interface, and a note saying this isn't implemented on the staff interface yet.
We remove the part about the staff interface until it actually is implemented.
Test plan :
1) Apply patch
2) Go to Administration > Did you mean?
3) See there is only the OPAC block
4) Change some checkboxes
5) Save configuration
6) Check that configuration is saved
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Owen Leonard 2018-03-16 10:47:47 UTC :
<<
I don't think the system preference adds any security. There are already multiple permissions required for working with plugins:
- Configure plugins
- Manage plugins ( install / uninstall )
- Use report plugins
- Use tool plugins
And even with those permissions your server must be configured to allow the use of plugins.
>>
Test plan :
1) Install kitchen sink plugin https://github.com/bywatersolutions/koha-plugin-kitchen-sink
2) Run misc/devel/install_plugins.pl
3) Set config enable_plugins=1
4) Check all parts of the plugin are working
5) Set config enable_plugins=0
6) Check all parts of the plugin are disabled
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
In order to remove UseKohaPlugins syspref, adds to Koha Template Toolkit
plugin a method ArePluginsEnabled().
Test plan:
1) Set syspref UseKohaPlugins enabled
2) Set config enable_plugins=1
3) Check you see "Tool plugins" in "Tools" home page and menu
4) Check you see "Manage plugins" in "Koha administration" home page
5) Check you see "Report plugins" in "Reports" home page and menu
6) Set config enable_plugins=0
7) Check you don't see in 3) 4) 5)
8) Run prove t/Koha_Template_Plugin_Koha.t
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
ClaimReturnedWarningThreshold is supposed to display a warning if a patron has more than the number of claims specified in the system preference. Currently the warning is displayed for any number of claims over zero.
Test Plan:
1) Make 3 return claims for a patron
2) Set ClaimReturnedWarningThreshold to 4
3) Note the claims warning displays for the patron on circulation.pl
4) Apply this patch
5) Reload circulation.pl, the warning should go away
6) Set ClaimReturnedWarningThreshold to 2
7) Reload the page, the warning should reappear
Signed-off-by: Sally <sally.healey@cheshiresharedservices.gov.uk>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch adds a unique id attribute to each checkbox in the table of
saved reports. Also updated is the corresponding <label>'s "for"
attribute so that clicking the report id will toggle the checkbox.
To reproduce, go to Reports -> Use saved and click a number in the ID
column. Nothing happens.
After applying the patch clicking the number should check or uncheck the
corresponding checkbox.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Works Ok, no errors.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch adds comments to the template to highlight the markup
structure.
This patch should have no effect on the interface or functionality.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch reindents the template for saved reports, replacing tabs with
spaces and making indentation consistent. Some lines have been split up.
To test, apply the patch and go to Reports -> Use saved.
- Test adding, editing, viewing, and running reports
- Test filtering by group and subgroup
- Test the process of adding a guided report
Everything should work as expected.
Use your preferred method for checking the differences between files
while ignoring whitespace. I use diff with the "-w" flag, but I'm not
your dad. The only changes you see should be split lines.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch adds a currency dropdown list to the Actual cost field when
receiving items in the acquisition module.
The idea is to let the librarian entered a price in a foreign currency
that will automatically be converted in the local currency ('active').
This converted value will be use as the actual cost once the form is
submitted.
Test plan:
- Create several currencies with different rates
- Create an order, close the basket and receive
- On the receipt page you will notice a new "change currency" checkbox
right close to the 'Actual cost' input.
- Check it
=> The 'Actual cost' input is readonly and a new line appears at the
bottom.
- Enter a number and select a currency
=> The 'Actual cost' input is automatically filled with the converted
value
- Save
=> The converted Actual cost has been inserted in the database.
Sponsored-by: Athlone Institute of Technology
Signed-off-by: Devinim <nazli@devinim.com.tr>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Fixes links to the patron accounts from the edit and list view of
suggestions.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
On creating the TT var managedby_patron does not exist yet
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
To separate the two feature we want to create a distinct template
notice.
A new NOTIFY_MANAGER notice is added.
A follow-up patch will be added for other languages, when this one will
be approved by QA.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
- Ensure that the sequence of columns will be the same for new
and updated installations (add AFTER ...)
- Fix permissions (see bug 22868)
- Fix column configuration (see 16784)
- Remove '- ' displying before the date
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
The notify option is only available from the edit view
Sponsored-by: BULAC - http://www.bulac.fr/
Signed-off-by: Séverine QUEUNE <severine.queune@bulac.fr>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
No tests are provided for the changes made to SearchSuggestion. It is
going to be remove very soon as it is super ugly...
Sponsored-by: BULAC - http://www.bulac.fr/
Signed-off-by: Séverine QUEUNE <severine.queune@bulac.fr>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Just a bit of cleaning
Sponsored-by: BULAC - http://www.bulac.fr/
Signed-off-by: Séverine QUEUNE <severine.queune@bulac.fr>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Prior to this patch there was an hidden behavior that set the manager to
the logged in user when a suggestion was edited. This patch proposes to
let the librarian pick another manager.
Other small adjustements will be added to polish this new behavior:
* Create 2 new DB columns: suggestions.lastmodificationby and
suggestion.lastmodificationdate
* Choose a manager when editing a suggestion
* Batch modify suggestions and set a manager for them
* Let notify the new manager using the TO_PROCESS letter
* Display the manageddate, lastmodificationby and lastmodificationdate
info where appropriate
This first patch adds a new "Select manager" link when editing a
suggestion.
Test plan for the whole patchset:
0/
a. Execute the update DB entry, generate the new DBIC file and restart all
b. Create at least 2 patrons with the suggestions_manage permission
1/ Submit a new suggestion (OPAC or staff, not important)
2/ Accept it
3/ Edit it
=> "Last modification by" is empty
=> You see that you are the manager of this suggestion
4/ Click "Select manager" and search for a new manager
=> The patron search will only display patrons with the
suggestions_manage permission
5/ Save
6/ Edit again
=> The manager is set to you, but there is a note saying that previously
it was the patron you picked
=> The "Last modification by" is set to you
7/ Click "Keep existing manager"
=> The manager is now set to the previous manager
8/ Select another manager (which has a valid email address defined)
9/ Click the "notify" checkbox
10/ Save
11/ Confirm that a TO_PROCESS notice has been generated into the
message_queue table
12/ Create at least one other suggestion
13/ List the suggestions
=> There is a 4th action column to assign a manager to several
suggestions in one go.
14/ Use this new button and confirm that it works as expected
15/ Go to your purchase suggestion list (OPAC and staff)
=> You see the "managed date" displayed in a new column
Sponsored-by: BULAC - http://www.bulac.fr/
Signed-off-by: Séverine QUEUNE <severine.queune@bulac.fr>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
- Branchcode = Library
- Desk id = Desk ID
- Show library name on desk list and when deleting desk instead of code
- Some small changes to the database documentation.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Add a desk and linked it to a library (branch). That's it. In the
future it'll have super features like being able to link waiting
reserve to a specific desk.
Test plan:
1. go to the administration page and notice there isn't any mention of
desk whatsoever
2. apply patches
3. ./installer/data/mysql/updatedatabase.pl
4. prove t/db_dependent/Koha/Desks.t
5. you now have desks links in admin-home and admin-menu
6. click the link
7. add a desk
8. add another one
9. delete one
10. you should have a fair list of all current desks defined
11. Done
Signed-off-by: Séverine QUEUNE <severine.queune@bulac.fr>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Whe a duplicate patron is found, the toolbar to save is display without
the button.
We must hide it completely, user has to use the 2 buttons from the dup
message "Editing existing" or "Save as new".
Signed-off-by: Sally <sally.healey@cheshiresharedservices.gov.uk>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Koha shows the number of subscriptions linked to a vendor,
but there is no way to look them up. This adds a link to the
subscription search with the vendor name, so there is an easy way
to find the subscriptions.
To test:
- Be superlibrarian or have serials permission
- Make sure you have one or more subscriptions linked to vendors
- Go to the vendor's detail page in acquisitions
- Verify the number of subscriptions is now a link
- Verify the search results are correct when clicking on it
- Remove permissions (no serials, not superlibrarian)
- Verify now the number shows, but is not linked
Signed-off-by: Nazlı Çetin <nazli@devinim.com.tr>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
The patron clubs note was ending with .., but patch also removed
some single . to be consistent with the majority of entries on the
tools page.
To test:
- Check the tools start page for ending . in the notes
- Apply patch
- Verify the punctuation is now consistent
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
There were several versions: auto renew, auto-renew, autorenew
I've decided to use auto renew (from automatic renewal) to keep
things a bit more consistent.
The DB update was missing AFTER and IGNORE for the sys pref.
Also fixed a tiny typo (tp > to)
Also changed
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
To test:
1 - Verify on staff side that patron can be edited to opt in our out of auto renewal
2 - Check out some items to a patron opted in to auto renewal
3 - Ensure the items are checked out and set to autorenew
4 - Login on the opac at the patron
5 - Verify items cannot be renewed as scheduled for auto-renewal
6 - On staff side, opt patron out of auto renewal
7 - Verify on opac items are no longer marked for auto renewal
8 - Run the auto renewal cron job, items are not renewed
9 - Set 'no renewal before' to a setting that would prevent renewal
10 - Verify that opting patron in or out of auto renewal changes only the reason items cannot be renewed
11 - Set 'no renewal before' to a setting that would allow for renewal
12 - Verify that opting patron in/out changes their ability to renew
13 - Verify that when opted out cron does not renew
14 - Verify that when opted in the item is auto renewed
15 - Reset the due date, opt out, verify manual renewal succeeds
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch adds an ID to the payout confirmation modal on the
borrower account details page.
Test plan:
1/ Apply patch
2/ Attempt to issue a payout to a patron
3/ Inspect the page and note the presence of an ID for the confirm
button
4/ Signoff
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Considering that the the use of finesCalendar for this calculation is
already a binary choice, it makes sense to remove the use of
finesCalendar here. It is an uneccessary complication that could
introduce confusion. Allowing this new setting to directly control
the behavior makes it clear and obvious what is going on.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Marti Fuerst <mfuerst@hmcpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This renames the selectbranchprinter.pl file to the more
fitting set-library.pl.
To test:
- Change the library with "Set library" from
- The menu in the top navigation bar
- The circulation start page
- Verify the help link on page leads to the correct
section in the manual
- Read the code... and verify all occurences have been caught
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch makes some minor corrections to the sidebar form on the hold
ratios report page:
- Correct markup errors
- Change the text of labels from "included" to "include"
- Move checkboxes to the left of labels
To test, apply the patch and rebuild the staff client CSS
(https://wiki.koha-community.org/wiki/Working_with_SCSS_in_the_OPAC_and_staff_client)
- Go to Circulation -> Hold ratios
- In the sidebar, confirm that the labels "Include ordered" and
"Include suspended" appear to the right of their associated
checkboxes.
- Validate the source of the page. There should be no errors.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch adds an ID to the refund confirmation modals for both
borrower account and point of sale register details pages.
Test plan:
1/ Apply patch
2/ Attempt to issue a refund to a patron
3/ Inspect the page and note the presence of an ID for the confirm
button,
4/ Attempt to issue a refund via point of sale register details page
5/ Inspect the page and note the presence of an ID for the confirm
button.
6/ Signoff
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Some libraries would like the option to ignore suspended holds when using the holds
ratio report
Note: this report fails with strict mode enabled, please disable to test
To test:
1 - Add enough holds to a record (3) to make it show on the holds ration report
2 - Browse to Circulation->Holds ratio
3 - Run with default settings and confirm the title shows up
4 - Suspend one of the holds
5 - Run report again and confirm title still shows
6 - Apply patch
7 - Reload the report
8 - Note new option
9 - Run report - title does not show
10 - Lower ratio to 2 and confirm the hold shows
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch makes 2 changes:
- bug 22702 allowed adding HTML to the circulation note, so this patch
restores that ability.
- display OPAC note and messages as multi-line in OPAC
To test:
- Add a circulation and an OPAC note with line breaks and HTML tags
to the patron account
- Add a message with line breaks to the patron account
- Check line breaks don't show on
- OPAC > patron account > my summary page
- Staff > patron account > details
- Apply patches
- Repeat test
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Test plan:
- Fill borrowernotes and opacnote with lines separated by lines
endings,
- save and check the content is displayed on a single line,
- apply this patch,
- check lines endings are displayed
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
We had a unique behvaiour where the syspref was set to string 'NULL'
as opposed to undef, we need to clean that up
To test:
1 - Set OpacRenewalBranch to 'NULL' in staff interface
2 - Renew via opac
3 - Check statistics to ensure branch is blank
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
When placing a hold in the staff interface, the heading on the
search box reads: Search Patrons or clubs
The patch changes it to be Search patrons... instead.
Also changes club id to club ID.
To test:
- Place a hold in the staff interface
- Verify the capitalization error
- Switch tabs to Clubs, see: club id
- Apply patch
- Verify it's all good now
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
The IDreamBooks service has not seen updates in a long time, so
we should remove the service from Koha as it's no longer operational.
To test:
- Apply patch and run the database update
- Verify that the IDreamBooks related system preferences are gone
- Verify that opac detail pages and result lists still work
as expected
- Run t/db_dependent/UsageStats.t
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
We can then now start to move methods from C4::Members::AttributeTypes
as well.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
The GetBorrowerAttributes subroutine return the attributes for a given
patron.
Using get_extended_attributes we can acchieve it easily. The problematic
here is to restore the method's name (value vs attribute,
value_description vs description of the authorised value, as well as
display_checkout that should not be a method of Attribute, but
Attribute::Type instead)
value_description was used when the attribute types were attached to an
authorised value category. To avoid the necessary test in template and
controller there is now a $attribute->description method that will
display either the attribute's value OR the value of the authorised
value when needed. We should certainly use this one from few other
places.
Notes:
* This patch rename Koha::Patron->attributes with Koha::Patron->get_extended_attributes.
It will be renamed with Koha::Patron->extended_attributes in ones of the next
patches when it will become a setter as well.
* GetBorrowerAttributes did not care about the library limits, we still
do not
* The opac_only flag was not used outside of test, we drop it off.
* To maintain the existing behavior we add a default order-by clause to
the search method [code, attribute]
* From C4::Letters::_parseletter we always display the staff description
of the AV, There is now a FIXME to warn about it
* FIXMEs are not regressions, existing behaviors must be kept
* TODO add a new check to bug 21010 to search for inconsistencies in
patron's attributes attached to non-existent authorised values
* One test has been updated in Modifications.t, order_by is now
by default set to ['code', 'attribute']
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Pre-fill guarantee contact details (email, phone) from guarantor record
when adding a gurantee to a guarantor's record
Test plan:
1. Apply first two patches and follow test plans
2. On an adult's patron record (which has an primary phone number, secondary
phone, other phone, primary email, secondary email and fax set) select
'Add a guarantee' and observe the guarantee's 'Contact' section is not
pre-filled with that information from the guarantor
3. Apply this patch
4. On the same adult's record select 'Add a guarantee' and observe that the
'Primary phone', 'Secondary phone', 'Other phone', 'Primary email',
'Secondary email', 'Fax' have been pre-filled from the guarantor's record
5. Fill out the rest of the memberentry.pl and 'Save' and observe that those
contact details are successfully saved
6. Repeat step 4 and alter the 'Primary phone' and 'Primary email'
fields and save and observe that those altered values are saved
7. Run tests and confirm they pass:
sudo koha-shell <instancename>
prove xt
prove t
Sponsored-by: South Taranaki District Council, NZ
Signed-off-by: Andreas Roussos <a.roussos@dataly.gr>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Instead of displaying 'Patron #' and displaying the guarantor's borrowernumber
in 'Guarantor information' we should display 'Patron card number:' with
the cardnumber displayed as that value is more meaningful to librarians.
The hyperlink containing the borrowernumber should stay the same so that
librarians can easily visit the patron record of existing guarantor
patrons.
Test plan:
1. Apply first patch and follow it's test plan
2. On an Adult patrons record select 'Add guarantee'
3. In 'Guarantor information' section of memberentry.pl observe in the
pre-filled guarantor information there is a line 'Patron #:' with a
link displaying a borrowernumber (not card number) and when you click
on the link it takes you to the adult/guarantors patron account
4. Select 'Search to add' and search and add another guarantor
5. Observe in the added guarantor 'Patron #:' is displayed along with the
borrowernumber (not card number). The borrowernumber displayed in not
a link.
6. Apply this patch
7. On a adults patron select 'Add guarantee'
8. Observe in 'Guarantor information' section the pre-filled guarantor now
has 'Patron card number:' displayed (instead of 'Patron #:', and it's
link now displays the guarantors cardnumber.
Clicking on the link still takes you to the guarantors patron account
9. Repeat step 4
10. Observe in the added guarantor they also have 'Patron card number:'
(instead of 'Patron #:'). A cardnumber rather than borrowernumber is
displayed. The cardnumber is not a link.
11. Confirm tests still pass:
sudo koha-shell <instancename>
prove xt
prove t
Sponsored-by: South Taranaki District Council, NZ
Signed-off-by: Andreas Roussos <a.roussos@dataly.gr>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Bug 14570 removed the guarantor pre-fill functionality when selecting
'Add guarantee' to an Adult patron. This is because guarantor
information would now only display if (1) the patron record exists
(which it won't when first adding guarantee to guarantor record) and (2)
if there is already a guarantor added to a guarantee
This patchfix will pre-fill guarantor fields and address fields (so the guarantee
has the same address as the guarantor) if no relationship (existing
guarantor data exists) and a guarantor_id is handed to memberenty.pl in
URL when clicking 'Add guarantee' button on Adults patron record.
Test plan:
1. Add adult patron make sure to fill in their 'Main address' details
2. Select 'Add guarantee'
3. Observe no details of the adult patron are displaying in the
'Guarantor information' section or 'Main address' sections of memberentry.pl
4. Select 'Search to add', search for your adult patron and choose
'Select' to add them as guarantor
5. Fill out rest of memberentry.pl and 'Save'
6. Observe adult is showing as the guarantor
7. Apply patch
8. Run tests:
sudo koha-shell <instancename>
prove xt
prove t
9. Confirm tests pass
10. Return to your adult patron
11. Select 'Add guarantee'
12. Observe in 'Guarantor information' and 'Main address' sections of
memberentry.pl are pre-filled with the 'patron #' (borrowernumber),
surname, firstname and street number, address, address2 (if you
filled that in on adults account), city
13. Fill out the rest of memberenty.pl and save and confirm your adult
patron is showing as the guarantor and the pre-filled address details
have been saved and are showing
14. Repeat steps 10,11 and 12 and in the 'Guarantor information' select
'Search to add' and add another adult as guarantor
15. Fill out the rest of memberentry.pl and 'Save' and notice with this
patch applied you can still add multiple guarantors successfully
Sponsored-by: South Taranaki District Council, NZ
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: George Veranis <gveranis@dataly.gr>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch enable the translation of the
labels 'Mandatory' or 'Optional' present at install time
for groups of installer files.
To test:
1) Try install using de-DE language,
at step3 verify 'Mandatory' and 'Optional'
labels for marc21 or other data checklist
Do not close this window!
2) Apply this patch
3) Update de-DE translation files, reinstall lang files
cd misc/translator
./translate update de-DE
./translate install de-DE
4) Reload page at step3, now 'Mandatory' label
is translated to 'Pflichtfeld'
5) Verify strings in translation file
Search for
^msgid \"Mandatory\"
^msgid \"Optional\"
in po/de-DE-staff-prog.po.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch adds handling for those 2 particular cases:
1. Deleting the expected issue
2. Deleting a serial and it's item, but one item cannot be deleted
To test:
1.1 Create a subscription that creates items
1.2 Receive two issues
1.3 Use the new button to delete the 'Expected' issue
1.4 The issue is correctly deleted, but the new expected issue created
to replace the one which has been deleted don't have a published or
received date and is show in it's own tab.
1.5 Apply patch
1.6 Repeat steps 1.1 through 1.4
=> The new expected issue is created correctly
2.1 Use the same serial as in 1 or repeat step 1.1 and 1.2
2.2 Check out one of the items
2.3 Delete the corresponding serial and check box to delete items
2.4 The serial is deleted, but not the item.
=> No feedback is show to the user
2.5 Apply patch
2.6 Repeat step 2.1 through 2.4
=> As before, the serial is deleted, but not the item
=> This time, an error is shown to inform the user
Signed-off-by: sonia <sonia.bouis@univ-lyon3.fr>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This new feature allows for batch deletion of serials through the UI. The current usage is a one-by-one long game.
Test plan :
- Apply patch.
- Create at least four serials with items.
- Notice that new items have a numbering pattern and a date in the enumchron field.
- Use the button Delete selected issues for the following steps.
- Delete a serial and its associated item.
- Confirm the serial and item are gone.
- Delete a serial and not its item.
- Confirm the serial is gone.
- Confirm the item is still there and the date part in the enumchron field is gone.
- Delete the two lasts serials.
- Confirm they are gone.
Sponsored-by: CCSR
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Sonia <sonia.bouis@univ-lyon3.fr>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Additional test plan:
Create 3 clubs: abc adf axy
place a hold for on of those club, search for a club 'a'
you will get the focus on the "Clubs" tab
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
