This patch implements a regression test for verifying that
duplicate hold notifications aren't sent if ModReserveAffect() is
called repeatedly (as might happen if a circ operator accidentally
checks in an item and confirms its hold more than once).
Note that the test depends on the fact that _koha_notify_reserve()
defaults to sending a HOLD_PRINT letter if the borrower has not
specified an email or SMS hold notification.
To test:
[1] Run prove -v t/db_dependent/Reserves.t
[2] The 'patron not notified a second time (bug 11445)' test
should fail.
[3] Apply the main patch and run prove -v t/db_dependent/Reserves.t
again. This time all tests should pass.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch adds a help file to the Renew page found under
Circulation.
To test:
* Go to Circulation > Renew
* Click the help link
* Confirm text and manual link are correct.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Trivial patch to add 'cron-daemon' as dependency for the koha-common
package. 'cron' is usually pulled in any minimal Ubuntu/Debian
install, but in some circumstances (using debootstrap) it might be
absent.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
No entry in debian/control yet, but
according to comments in the file this file is generated
from control.in - so this should be ok.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
There were 2 INSERT in error.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
I have gone ahead and fixed the typo pointed out by Mathieu:
Endommadgé-> Endommagé
Sample files install without problems, tests look good.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch adds some categories of values in French installer :
- SUGGEST
- OPAC_SUG
- REPORT_GROUP
- LOST
- DAMAGED
SUGGEST and OPAC_SUG are used by Suggestions module.
REPORT_GROUP is used by Reports module.
It also adds a new status for "ETAT" (en commande)
It creates a 995$2 subfield in french frameworks when it did not exist.
It links existing 995$2 subfield with LOST category.
It cleans up the list of authorised values installed with "Lecture
publique" framework :
- some codes are moved in general 1-Obligatoire/authorised_values.sql
(SUGGEST, REPORT_GROUP)
- some are suppressed, because they are also defined in
1-Obligatoire/authorised_values.sql (langue, COUNTRY, statut)
- the code for inserting the ones left is changed (I suppress the `id`
column)
To test :
1. Take a fresh new Koha
2. Install Koha choosing French installer and UNIMARC Lecture publique
3. Check the authorised values are imported
4. Check the cataloguing frameworks are usable :
especially 995 $2 field, which must be mapped with LOST values :
Perdu, Long retard, Perdu et remboursé, Introuvable
you can also check 101$a (language codes), 102$a (country codes)
5. In OPAC, make a suggestion. See if you can select a cause for your
suggestion ("Bestseller" or "'L'exemplaire en rayon est endommagé")
6. In staff interface, manage some suggestions. See if you can select a
cause for rejection or acceptation ("Bestseller", "Budget
insuffisant" etc)
7. In reports, see if you can sort reports according to values of
REPORT_GROUP ("Circulation", "Catalogue", "Adhérents" etc)
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Comments on second patch.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch:
- Makes the new subfield tab show maxlength=9999 as default (instead of
empty-then-zero).
- Updates the help to make exlpicit that 0 or empty defaults to 9999.
- Assumes all the subfields created with maxlength=0 inadvertedly are
meant to mean "no limit" and hence update the database to reflect
that.
To test (this patch and Pablo's):
- Edit a MARC framework, edit some field's subfields.
- Use the 'New' tab to create a new subfield (choose an unused letter).
- See in "More constrains" that the "Max length" field is empty. Leave
it as-is.
- Save the changes (the new subfield).
- Edit the field again, verify that "Max length" is 0.
- Try tu use the framework and the the field/subfield just created
> FAIL
- Apply the patches, upgrade
- Try to use the framework/field/subfield > SUCCESS (0 was converted to
9999)
- Repeat from the begining, "Max length" should show 9999 on the new
subfield tab.
- Leave it empty, it is saved as 9999.
Edit: small typo
Sponsored-by: Universidad Nacionald de Cordoba
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes QA script and tests in t and xt.
Tested:
- deleting an existing subfield
- adding a new subfield with new default 9999
- editing the new subfield, changing value to 8888
- deleting new subfield
- adding new subfield, using 8888 as length
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
The default value for the marc_subfield_structure.maxlenght is 9999
in the DB. Currently the template passes an empty value which is casted to
0 by the CGI.
This simple patch validates the input and converts to the default (9999)
if not defined or 0.
Another approach could be changing the 9999 default and/or treating 0 as
'no-limit'.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Works by defaulting 0 or "" to 9999.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
When a z39.50 server isn't able to be searched successfully, the yellow
error box came up empty. This patch fixes the problem.
Test Plan:
1) Go to Administration/z39.50 servers
2) Create a fake z39.50 server with a made up address
3) Go to cataloging, search only that server
4) Note the empty yellow alert box
5) Apply this patch
6) Re-run the search, not the alert box has a message in it now
Signed-off-by: Nora Blake <nblake@masslibsystem.org>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script.
Works according to test plan.
When one of the selected servers gives result no dialog
box is shown before and after applying the patch.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
The tests should be executed into a transaction and the SimpleSearch
routine correctly mocked.
Test plan:
Verify that prove t/db_dependent/XISBN.t returns green.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
A unit test fails in t/db_dependent/XISBN.t, the get_xisbn routine, if
ThingISBN is enabled, returns the 3rd biblionumber, not the second one.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
bulkmarcimport.pl can crash when searching for duplicates if the 005
field from the incoming or local record is not defined. This patch
fixes it.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Test plan
1/ Create a record with no 005 field
2/ Try to import it checking for duplicates, notice it crashes
3/ Try with a record with a 005 field, but the one in Koha missing
one, still crashes
4/ Apply patch
5/ No more crash
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script.
Patch fixes the problem described for importing authorities
with the bulkmarcimport.pl when trying to match with existing
records.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch fixes a bug where using the patron editor to add a new
restriction overwrote the first existing one.
Test Plan:
1) Edit a patron, add a restriction
2) Edit the patron again, add a second restriction
3) Note the first restriction has disappeared!
4) Apply this patch
5) Edit the patron again, add another restriction
6) Note the previous restriction is not longer removed
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Tested:
- Adding and removing multiple restrictions from
- the details tab
- the checkouts tab
- the edit patron form
All works as expected.
Patch passes all tests in t, xt, and QA script.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
ModMember supposes the password given in parameter is the
password string, so if it receives the encrypted password,
it will encrypt it again! By simply deleting the password key
from the hash, ModMember leaves the password unchanged.
Test plan:
1/ Create or choose a child patron
2/ Update it to an adult category using the
"Update child to adult patron" link
3/ Try to log in at the OPAC with this patron: It is not
possible, the password has changed
4/ Apply the patch and try again previous steps
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Confirmed the problem and tested the patch fixes it.
Passes all tests and QA script.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
The -munge-config switch has been deprecated for years, and
trying to use it would either not work at all or, if it did "work",
almost certainly damage one's Zebra configuration for Koha.
This patch removes this switch.
To test:
[1] Run rebuild_zebra.pl and verify that no mention is made
of -munge-config.
[2] Run rebuild_zebra.pl to index records in one's test database
and verify that there are no regressions.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Removing a really dangerous option
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script.
Ran rebuild_zebra.pl with various options and confirmed
that data was reindexed successfully.
No regressions found.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
In C4::Items::DelItemCheck, there are two SQL queries: one to check
if item is on loan, the other if item is reserved.
Those two queries use "SELECT * FROM table", fetch the data with
"$var = $sth->fetchrow", and use "$var" as a boolean condition.
This is not correct, SQL query should be "SELECT COUNT(*) FROM table".
As a consequence, it was possible to delete an item without warning to
the operator even if it was waiting on the hold shelf or in transit to
fill a hold.
This patch corrects the SQL queries and sets my ($var) to show that
fetchrow returns an array.
Test plan :
- Set an item A onloan
- Set an item B reserved and the reserve waiting
- Go to items cataloguing : cgi-bin/koha/cataloguing/additem.pl?biblionumber=XXX
- Try to delete item A
=> You get an alert and item is not deleted
- Try to delete item B
=> You get an alert and item is not deleted
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Works, and has the added bonus of being a tiny bit faster.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes t, xt and QA script tests.
Also tried deleting via batch delete - correct warnings are displayed.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch adds unit tests for two parts of DelItemCheck: checking
if the item is on loan, and checking if it is waiting on the hold
shelf.
To test:
[1] Verify that prove -v t/db_dependent/Circulation/IsItemIssued.t
is successful.
[2] Verify that prove -v t/db_dependent/Reserves.t is *not*
successful -- as it turns out, there was a latent bug where items
waiting on the hold shelf or in transit to fill a hold could still
be deleted without any warning.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Currently, xmlControlfield.js is hard coded to look for XML files for
MARC21:
url: this.themelang + "/data/marc21_field_" + this.tagfield + ".xml",
This patch makes this code use the value from the marcflavour syspref,
as a preparation for making the NORMARC value builders use the XML
technique employed by the MARC21 value builders for 006 and 008.
To test:
- Make sure you have a MARC21 installation
- Set marcflavour = NORMARC
- Go to Cataloguing and start a new record with the default framework
- Open the value builders for 006 and 008 and observe that they still work, showing
the coded values for MARC21
- Apply this patch
- Check the value builders for 006 and 008 and observe that you get a truncated view
with an empty "Select a type of material" dropdown
- Use e.g. the Net console in Firebug to observe requests to
http://localhost/intranet-tmpl/prog/en/data/normarc_field_008.xml
that result in a 404 status
- Set marcflavour = MARC21
- Observe that the value builders for 006 and 008 are now fully working
- 006 and 008 should be the only value builders affected by this change, since
they are the only ones using xmlControlfield.js, but please also verify that
other value builders are still working as expected
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Some libraries would like to be able to search on the sort1 and sort2
fields of patron records.
Test Plan:
1) Apply this patch
2) Add various values for sort1 and sort2 some patrons
3) Browse to members-home.pl
4) Run searches on sort1 and sort2
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch adds language-original to the list of search fields
recognized by QueryParser.
To test:
[1] After doing the tests in the main patch, copy the configuration
file etc/searchengine/queryparser.yaml into place, turn on the
UseQueryParser system preference, and verify that searching on
language-original still works.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
It could be useful to index the original language of a document (i.e.
"fre" for the English translation of a French novel).
This patch renames the Bib-1 use attribute 1095 from
Code-language-original to language-original and uses it to index:
- MARC21 041$h subfield
- UNIMARC 101$c subfield
It adds "language-original" in the list of index in Search.pm.
Test plan :
A. in a MARC21 GRS1 environment
1. Copy Zebra config files (zebradb/biblios/etc/bib1.att,
zebradb/ccl.properties, marc_defs/marc21/biblios/record.abs) from
your source etc/ directory to your main koha etc/ directory
2. Reindex zebra
3. Make some searches, like "language-original:fre"
B. in a MARC21 DOM environment
4. Copy Zebra config files (zebradb/biblios/etc/bib1.att, zebradb/ccl.properties,
marc_defs/marc21/biblios/biblio-zebra-indexdefs.xsl) from your source etc/
directory to your main koha etc/ directory
5. Reindex zebra
6. Make some searches, like "language-original:fre"
C. in a UNIMARC GRS1 environment
7. Copy Zebra config files (zebradb/biblios/etc/bib1.att,
zebradb/ccl.properties, marc_defs/unimarc/biblios/record.abs) from
your source etc/ directory to your main koha etc/ directory
8. Reindex zebra
9. Make some searches, like "language-original:fre"
A. in a UNIMARC DOM environment
10. Copy Zebra config files (zebradb/biblios/etc/bib1.att,
zebradb/ccl.properties, marc_defs/unimarc/biblios/biblio-zebra-indexdefs.xsl)
from your source etc/ directory to your main koha etc/ directory
11. Reindex zebra
12. Make some searches, like "language-original:fre"
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
When item is transfered from items table to deleted items, all fields
must be copies but "timestamp".
This value must be updated to know when the item was deleted.
Test plan:
- Look a an item timestamp :
mysql> select timestamp from items where itemnumber = 2690;
+---------------------+
| timestamp |
+---------------------+
| 2011-09-09 15:30:21 |
+---------------------+
1 row in set (0.00 sec)
- Delete this item in cataloguing module
- Check it is not in items table anymore :
mysql> select timestamp from items where itemnumber = 2690;
Empty set (0.00 sec)
- Look in deleteditems table :
mysql> select timestamp from deleteditems where itemnumber = 2690;
+---------------------+
| timestamp |
+---------------------+
| 2013-12-05 15:33:20 |
+---------------------+
1 row in set (0.00 sec)
=> timestamp as been set to actual date/time
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Patch set passes koha-qa.pl, works as advertised!
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This is supplementary to the main patch for
bug 6331. Having removed the attribute marc from
items DelItem, we should not try to populate it.
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
There is a difference between "items" and "deleteditems" tables
in "kohastructure.sql"
"deleteditems" has a field "marc" not existing in "items".
This patch removes this obsolete column.
Test :
- after deleting an item, check that the deleted item is properly
stored in deleteditems table
- check that the column marc has been deleted from deleteditems table
Signed-off-by: Mathieu Saby <mathieu.saby@univ-rennes2.fr>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch updates the DBIC schema class for Suggestion
to reflect the dropped default value for the suggesteddate
column.
To test:
[1] Create an empty Pg database and use the deployment script
being worked in in bug 11390. The deployment shoudl
succeed without reporting any errors regarding the
suggestions table.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
The 'default 0' clause got translated as an invalid constant
default of '0000-00-00' when DBIx::Schema is used to deploy
the suggestions table into a Pg database. This patch drops
the default.
To test:
[1] Apply the patch and run the SQL specified in the database
updated.
[2] Verify that the suggestions table no longer has an
explicit default value for the suggesteddate column.
[3] Verify that prove -v t/db_dependent/Suggestions.t
passes.
[4] Verify that installer/data/mysql/kohastructure.sql runs
cleanly in an empty database.
[5] Verify that there are no visible regressions of the
purchase suggestions functionality.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Having a default of 0 on a date seems like a mad thing to do anyway,
so good to get rid of it
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch updates the DBIC schema class for CollectionTracking
to reflect the new name of its primary key column.
To test:
The CollectionTracking class is not currently used, but
if you *really* want to test this, take a look at the following
branch: http://git.librarypolice.com/?p=koha-galen.git;a=shortlog;h=refs/heads/pg
Then, set up a PostgreSQL database, update koha-conf.xml to point to it,
then run pg/deploy and verify that the collections_tracking table is created
in the Pg database.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
'ctId' as a column name conflicts with one of the system
columns that PostgreSQL uses for each table, and consequently
needs to be renamed to enable deploying the schema to a Pg
database. This patch makes this change.
To test:
[1] Apply the patch and run the SQL specified in the database
updated.
[2] Verify that the collections_tracking table no longer has
a ctId column, but now has collections_tracking_id.
[3] Verify that prove -v t/db_dependent/RotatingCollections.t
passes.
[4] Verify that installer/data/mysql/kohastructure.sql runs
cleanly in an empty database.
This patch does not affect user-visible behavior given the fact
that the rotating collections feature is currently disabled.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch removes the legacy Pg schema and MARC framework scripts
as they're out of date. They will be replaced by use of DBIx::Class
to deploy the schema. Loading the sample data and settings will be
accomplished either by making the current scripts in installer/data/mysql
DBMS-independent (or, at least, able to be processed by both MySQL and Pg),
converting them to flat text files and writing code to load them, or a
combination of the two approaches.
To test:
[1] Verify that installer/data/Pg is removed. There is some code
in C4::Installer that refers to that directory, but it cannot
be reached through normal means.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Test plan:
On the MARC modification tool:
Add/edit a new action on a field and define a condition on the same
field.
Verify that you get a warning message in red.
See bug 11413 for more information
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script.
Tested adding and editing a template with the same field in the
action and the condition.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Problem summary: when doing partial receives for the given order -
1) if AcqCreateItem is set to 'ordering', various item data (price,
dateaccessioned, replacementprice, replacementpricedate) are getting
erroneously updated on the wrong (yet to be received == not the ones
being currently received) item records
2) if AcqCreateItem is set to 'receiving', newly received
item records are being created without the aforementioned fields
set to the proper values
This (trivial) patch should deal with both cases, hopefully without
breaking enything else.
To test:
- apply the patch,
- create some orders with 2+ quantity
- test partial & non-partial receives for those orders
- ensure the received item records are getting modified
(for AcqCreateItem set to 'ordering') and/or created (for AcqCreateItem
set to 'receiving') correctly for both partial and non-partial receives
- receiving orders with quantity = 1 / receiving orders in non-partial
mode should be still working fine for 1) & 2) scenarios (i.e.,
AcqCreateItem set to 'ordering' / AcqCreateItem set to 'receiving')
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
Works as I'd expect now! Awesome patch.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script.
Also: t/db_dependent/Acquisition/
t/db_dependent/Acquisition.t
Created 2 orders with 3 items each for both settings
of AcqCreateItem (on receive, on order) with the patches
applied. No regressions found.
Closed baskets and received shipments for each, with
AcqCreateItem set according to how the order was created.
First recreated the problem without the patches, reloaded
database and confirmed that the patch fixes it.
No problems found.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Older versions of Koha didn't have <backupdir>...</backupdir> defined in
koha-conf.xml. The koha-dump script is aware of this, and checks to see
if it's there. However, if it's not, xmlstarlet returns a non-0 error
code which causes the script to abort due to running under set -e.
Test plan:
* Remove backupdir from koha-conf.xml
* Run koha-dump, notice that it doesn't do backups
* Apply patch
* Run koha-dump again, notice that it does do backups
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The fallback method works as described. It might be made more robust
like checking for dir existence (thinking of older instances upgrades).
But it certainly belongs to another bug report.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
As Tomas said, it would be better to alert the user if the backupdir tag
does not exist (or contains a nonexistent directory) in the config file.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Quotation marks in MARC21slim2OPACDetail.xsl break author tracings in
OPAC. This patch fixes that for the prog theme; the Bootstrap theme
is not affected.
To reproduce:
- Enable UseAuthoritiesForTracings
- Search in the OPAC and go to the detail page of a record that has
links to authorities.
- Click on the magnifier icon
- You get a 404 error page.
To test the fix:
- Apply the patch
- Search in the OPAC and go to the detail page of a record that has
links to authorities.
- Click on the magnifier icon
- You are sent to the corresponding authority record.
Sponsored-by: Universidad Nacional de Cordoba
Signed-off-by: David Noe <drnoe@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Passes koha-qa.pl, trivial change
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch moves the styling of the #transl1 element from an
inline style attribute to the CSS file to make it easier to
tweak.
To test:
- Switch to prog theme, problem doesn't exist in Bootstrap theme
- Take a look at the simple search input field
- Apply patch
- Refresh page
- Make sure field has the same length and size
You can also use Firebug to make sure the same styles
are applied to the element before and after the change.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
When QueryParser is off, the cataloging search is passing the incorrect
variable to SimpleSearch. I'm sure this is causing other issues, but
the one I have identified is that any searches with an "&" in them
return no results. This patch corrects the bug.
Test Plan:
1) Catalog a new record titled "Cats & Dogs"
2) Rebuild your zebra index so this record is indexed
3) Browse to cataloguing/addbooks.pl
4) Search for "Cats & Dogs"
5) Notice you get no results
6) Apply this patch
7) Repeat the search
8) Notice your result now shows up!
Signed-off-by: Heather Braum <hbraum@nekls.org>
Signed-off-by: Suzanne Fayle <sfayle@roseman.edu>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
This works as described, passes all tests and QA script.
Note: Because $query = $builtquery when the QueryParser is used,
this problem is only visible when UseQueryParser is set to "Don't try".
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch adds the missing help files to the MARC modification
templates tool. To test:
* Visit Tools > Marc modification templates
* Click 'Help' in the top right
* Confirm that help is there and right
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
In funds administration, admin/aqbudgets.pl, there is a combobox for
filtering by library code.
The bug is that the filter uses a pattern match instead of equals :
next unless $budget->{budget_branchcode} =~ m/$filter_budgetbranch/;
In this case, if there is a library with code '1' and one with code '12',
filtering by library '1' will also show funds of library '12'.
Test plan :
- Create a library with code '1' and one with code '12'
- Create funds in both libraries
- Go to admin/aqbudgets.pl
- Filter by branch '12'
=> You see only funds of this library
- Filter by branch '1'
=> You see only funds of this library
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Passes koha-qa.pl, works as advertised
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Removes USE KohaAuthorisedValues plugin from
item-status-schema-org.inc as it does not seem to be used
in the file.
Couldn't detect regressions removing it on OPAC detail page.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Trying to write my own test plan here:
1) AllowNotForLoanOverride = Allow
Mark single item not for loan and try to check it out.
Check item not for loan status shows up correctly in message:
Item is normally not for loan (Staff Collection). Check out anyway?
2) Toggle AllowNotForLoanOverride = Not Allow
Try to check out your not for loan item again.
Message has changed, but not for loan status should still show:
Item not for loan (Staff Collection).
3) Check out item that is marked damaged.
Check damaged status shows correctly in list of checkouts.
4) Mark item as lost and check it out.
Check lost status shows up correctly in message:
This item has been lost with a status of "Lange überfällig (Verloren)".
5) Create your own custom SUGGEST_STATUS and check that it shows
up correctly on the suggestion page.
6) Test item status show up correctly on OPAC detail page (lost, not
for loan, damaged, etc). Requires follow-up patch to be applied.
7) Mark a suggestion with your custom status and make sure it shows
up in the patron account in OPAC correctly.
Passes tests and QA script - needs a follow up for item-status-schema-org.inc.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch removes the KohaAuthorisedValues TT plugin; uses of it are
replaced by the AuthorisedValues plugin, which does the same thing.
Test Plan:
1) Apply this patch
2) View the pages that this patch has modified, make sure the branch
name is still visible
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Comments on second patch.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This follow-up applies the same fix to the Bootstrap theme. This patch
also includes the changes to item-status.inc in the Bootstrap theme
which were made to the prog theme in Bug 10820: display item status as
lost if item is both lost and on loan.
Signed-off-by: Liz Rea <liz@catalyst.net.nz>
Bootstrap theme looking so nice. Also the patch works.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
