This patch updates the patrons requesting modification page so that
Bootstrap accordion markup is generated by WRAPPERs.
To test, apply the patch and make sure you have the OPACPatronDetails
system preference enabled.
- Create at least two different patron modification requests:
- Log in to the OPAC using two different patron accounts, each time
following the sidebar link for "Personal details."
- Make some changes to the patron records and submit them.
- In the staff interface, from the home page, click the "Patrons
requesting modifications" link.
- You should see the list of updates in the same format as before:
Collapsible panels where clicking the patron name heading expands the
corresponding information.
- View the detail or checkout page for one of your updated patrons.
- Click the "Review pending modifications" link.
- The modifications page should open with that patron's information
exapanded.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This patch adds Template::Toolkit WRAPPER blocks to html_helpers.inc so
that templates can build Bootstrap accordion components while keeping
the Bootstrap structural markup separate.
Each individual component of a Bootstrap accordion interface is defined:
- Group container
- Collapsible item
- Item heading
- Item content
Included is a usage example:
[ WRAPPER accordion id="accordion container id" ]
[ WRAPPER accordion_item ]
[ WRAPPER accordion_heading panel_id = "panel id" ]
[Clickable panel heading ]
[ END ]
[ WRAPPER accordion_panel panel_id = "panel id" ]
[Expanding content panel]
[ END ]
[ END ]
[ END ]
To test, apply this patch and one of the dependent patches.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
The issue is caused by these lines in circulation.js:
$("#finesholdsissues a[data-toggle='tab']").on("shown.bs.tab", function(e){
$(this).click();
});
When the user clicks on a hidden tab, 'shown.bs.tab' is triggered and
then another click event is triggered. And because the table was loaded
on tab click, it was loaded twice.
Visually it could have caused the rows to be duplicated (it was random,
probably due to timing, network latency, ...)
I don't know why we need to trigger a click in this case, but removing
this will probably break something else, so the fix here is to load the
table on 'shown.bs.tab' event instead of 'click'
This patch also contains a small fix in refreshReturnClaimsTable which
was reloading the table right after the table initialization.
Test plan:
1. Check out an item, and in the checkouts table, click "Claim returned"
2. Open the network tab of your browser's developer tools
3. Click on the "Claims" tab, verify that only one call is made to
svc/return_claims
4. Verify that the claims table is displayed correctly
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This patch updates the "Order staged MARC records" page so that the
class which is added upon selection is more unique to avoid a collision
with some default DataTables styles. These classes are used in
JavaScript selectors, not for visual style.
The patch also adds some custom CSS variables to global.scss to override
the defaults for the DataTables "selected" style, in case this issue
crops up again.
To test, apply the patch and rebuild the staff interface CSS. Follow the
test plan from the bug report:
1) In system preferences, click Search and then select the Acquisitions
option from the left hand menu
2) Paste the following into MarcFieldsToOrder
price: 975$p
quantity: 975$q
budget_code: 975$h
3) Paste the following into MarcItemFieldsToOrder
homebranch: 949$a
holdingbranch: 949$b
itype: 949$y
nonpublic_note: 949$x
public_note: 949$z
loc: 949$c
ccode: 949$8
notforloan: 949$7
uri: 949$u
copyno: 949$t
price: 949$g
replacementprice: 949$v
itemcallnumber: 949$o
quantity: 949$k
budget_code: 949$l
4) Save the sysprefs
5) Navigate to acquisitions and go into a basket
6) Click "Add to basket" and select "From a new file"
7) Download the file attached to this bug
8) Import the file and when the job is complete click "Add staged files
to basket"
9) Click the checkbox next to the record to display the items.
- The expanded form should look correct.
10) Add one or more items to the order and confirm that submitting the
form works correctly.
To test the new default "selected" DataTables style, view a page with a
DataTable, e.g. Administration -> Libraries.
- Right-click on one of the table rows and choose "Inspect"
- Click the table row element, e.g. '<tr class="odd">'
- Double-click the class name and replace it with "selected."
- The row you inspected should now have a pale green background and text
colors should remain the same.
Signed-off-by: Matt Blenkinsop <matt.blenkinsop@ptfs-europe.com>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Addressing the warning:
illrequestattributes is DEPRECATED in favor of extended_attributes
No functional behaviour change here
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Test plan, k-t-d:
1) Install FreeForm and BLDSS backends, run:
bash <(curl -s https://raw.githubusercontent.com/ammopt/koha-ill-dev/master/start-ill-dev-plus.sh)
2) Set ILLModuleDisclaimerByType system preference , visit:
/cgi-bin/koha/admin/preferences.pl?tab=interlibrary_loans#interlibrary_loans_Workflow
3) Copy the example code, click the 'Click to edit' link to open the text area, and paste the example yaml:
all:
text: |
<h2>HTML title</h2>
<p>This is an HTML paragraph</p>
<p>This is another HTML paragraph</p>
av_category_code: YES_NO
article:
text: copyright text for all article type requests
av_category_code: YES_NO
bypass: 1
4) Create a new FreeForm request, visit:
/cgi-bin/koha/ill/ill-requests.pl?method=create&backend=FreeForm
5) Set type 'Book', put'9780822370451' in ISBN, put '42' in the cardnumber, and pick a library
6) You should now be in the type disclaimer stage, click 'Submit'
7) Notice the disclaimer value and date are displayed under 'Details from supplier'
8) Click the top 'Switch provider' button and pick BLDSS
9) You should get one result, click the 'Request BLL01018665793' link to finish the migration
10) You should now be in the ILL table, click the request that was just migrated to BLDSS
11) Notice the type disclaimer information is no longer visible
12) Apply patch, restart plack: koha-plack --restart kohadev
13) Refresh the BLDSS request, the information should now be visible in the 'Request details' section
Signed-off-by: Richard Bridgen <richard.bridgen@nhs.net>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
In commit f1078daf8f
Bug 34219: Allow getAll to receive additional URL parameters
We needed to call getAll instead of get to fetch all the vendors
Test plan:
Have more than 20 vendors and create/edit an agreement.
Notice that the vendor list contains all the vendors
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Matthias Le Gac <matthias.le-gac@inlibro.com>
Signed-off-by: Pedro Amorim <pedro.amorim@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Test plan: Run t/db_dependent/Koha/Plugins/KitchenSink.t
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
In misc/export_records.pl add an option to add see-from headings (from authorities 4xx) into bibliographic records export.
Like it is done during record indexing.
Test plan :
1) Choose a biblio record having a field (for example 650) linked to an authority with a see-form.
2) Export this record without see-from headings :
misc/export_records.pl --starting_biblionumber=X --ending_biblionumber=X --filename /tmp/record_without.xml --format xml
3) Export this record with see-from headings :
misc/export_records.pl --starting_biblionumber=X --ending_biblionumber=X --filename /tmp/record_with.xml --format xml --embed_see_from_headings
4) Compare /tmp/record_without.xml and /tmp/record_with.xml
=> you should see two 650, one with main heading and one with see-from heading
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Andrew Fuerste Henry <andrewfh@dubcolib.org>
Signed-off-by: Emily Lamancusa <emily.lamancusa@montgomerycountymd.gov>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
To test:
1. APPLY PATCH, updatedatebase, restart_all
2. Search for the system preference 'HoldRatioDefault'.
3. It should be set to 3. Change the value to something else.
4. Load the report at 'circ/reserveratios.pl'. Circulation > Hold ratios
5. The default value should be the value you set in the new system preference.
6. Run the report with the default value and make sure it works.
7. Change the value and run the report. The new value should be retained.
8. Leave the page and come back. Again the default value from the new system preference should be set.
Signed-off-by: Andrew Fuerste Henry <andrewfh@dubcolib.org>
Signed-off-by: Emily Lamancusa <emily.lamancusa@montgomerycountymd.gov>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Andrew Fuerste Henry <andrewfh@dubcolib.org>
Signed-off-by: Emily Lamancusa <emily.lamancusa@montgomerycountymd.gov>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
To test:
1. APPLY PATCH
2. Create a CSV file with a few lines that contain at least firstname, surname, cardnumber
3. Turn on "CronjobLog".
4. Run the import patron script. I did this: perl /kohadevbox/koha/misc/import_patrons.pl --file 'test1.csv' --matchpoint cardnumber -c
5. Check the action logs for cronjobs.
6. You should see info. about the import patron script.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Emily Lamancusa <emily.lamancusa@montgomerycountymd.gov>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This patch harmonizes the hook name and parameters with the rest of the
codebase.
To test:
1. Apply this patch
2. Run:
$ ktd --shell
k$ qa
=> SUCCESS: All looks green, and tests still pass (i.e. they were
correctly adjusted to the new schema).
3. Sign off :-D
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This patch implements a hook allowing record modification right before
they are written on the DB. The idea is that a plugin could be used to
add machine-generated fields/subfields.
To test:
1. Apply the unit tests patch
2. Run:
$ ktd --shell
k$ prove t/db_dependent/Koha/Plugins/Biblio_and_Items_plugin_hooks.t
=> FAIL: Tests fail! The hook is not implemented so the desired results
don't appear (added fields/subfields).
3. Apply this patch
4. Repeat 2
=> SUCCESS: It works!
5. Run:
k$ qa -c 2
=> SUCCESS: All green!
6. Sign off :-D
Sponsored-by: Theke Solutions
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This patch moved the SerialsDefaultEMailAddress system preference and
the SerialsDefaultReplyTo system preference to the Serials preferences.
To test:
1. Apply patch
2. Go to Administration > System preferences > Acquisitions
--> SerialsDefaultEMailAddress and SerialsDefaultReplyTo should not
be there
3. Go to Administration > System preferences > Serials
--> There should be a new section called "Notifications" with
the two system preferences
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Emily Lamancusa <emily.lamancusa@montgomerycountymd.gov>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Trivial fix.
Test plan:
Find a deleted biblio record in ACQ (in active orders part) and
verify that there is no Place hold option on that row.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Emily Lamancusa <emily.lamancusa@montgomerycountymd.gov>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This patch corrects the default UNIMARC bibliographic framework to
place all the 4XX subfields in tab 4.
To test:
1. Go to Administration > MARC Bibliographic framework test
--> There should be errors indicating subfields from 4XX fields
are in tabs 3 and 4
2. Apply patch and reset_all
3. Redo step 1
--> It should now say that all subfields for each tag are in the
same tab (or ignored)
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This patch changes the conditional that determines if a patron attribute is displayed in the patron brief info. Instead of checking the value of the attribute we should check if the attribute is defined.
To test:
1. Create a patron attribute, eg. party_mode, check 'display in patron's brief info' and tie to the YES_NO authorised value.
2. Find a patron and set your attribute to Yes
3. Confirm you see the attribute and its value both in the "Additional attributes and identifiers" section of the patron detail page and in the patron brief info area
4. Set your attribute to No
5. Confirm you see the attribute and its value in "Additional attributes and identifiers" but it no longer shows in the brief info
6. Apply patch and restart_all
7. Notice that your attribute now displays in the brief info, such as Party mode: No
8. Set the attribute to the first empty option
9. Check the patron record brief info to confirm that the attribute does not display when the value is empty.
Signed-off-by: Andrew Fuerste Henry <andrewfh@dubcolib.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
We update the 'Send welcome email' button to read 'Send welcome notice'
and add a fallback to enqueue a notice for print when the user doesn't
have an email address defined.
Test plan
1) Apply patch
2) Use the 'Henry Acevedo' user who doesn't yet have a valid email
address.
3) Click the 'Send welcome notice' button available from the 'more'
menu.
4) Note that no notice is queued at all.
5) Copy the content of the 'email' WELCOME notice into the 'print'
template.
5) Repeat step 3.
6) Note that this time a 'print' type notice is queued for the user.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Test plan:
1. Set AuthorityXSLTResultsDisplay to a valid XSL file (see bug 30554
attachments, there is an example XSL file)
2. Go to the bibliographic record editor (edit an existing one or create
a new one)
3. Find a field linked to authorities and open the plugin
4. Start a search and verify that the results are displayed using the
XSLT output (if using the example file it should be a link saying
"Authority #<authid>")
Sponsored-by: Écoles nationales supérieure d'architecture (ENSA)
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
To test:
1 - Find or add a record with title: Chevilly-Larue, L'Haÿ-les-Roses, Fresnes, Rungis [par] Sté éditions et de publicité L.F.B.
2 - Search for 'L'Hay-les-Roses'
3 - No results
4 - Apply patch, copy the file:
sudo cp /kohadevbox/koha/etc/zebradb/etc/word-phrase-utf.chr /etc/koha/zebradb/etc/word-phrase-utf.chr
5 - Restart all, Reindex
restart_all
sudo koha-rebuild-zebra -v -f kohadev
6 - Search again
7 - Success!
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This patch updates search header includes so that the tabs use WRAPPER
to build markup.
To test, apply the patch rebuild the staff interface CSS.
Test at least one page which uses each updated search include. Search
header tabs should look correct and work correctly.
- Acquisitions
- Suggestions
- Administration
- Budgets and funds
- Cities
- Currencies
- Desks
- Patron categories
- System preferences
- Z39.50
- Advanced search
- Authorities
- Bibliographic detail page
- Cataloging home page
- Check in
- Check out
- Acquisitions -> Vendor -> Contracts
- ERM
- Staff interface home page
- Serials
- Tool -> Notices
Signed-off-by: Martin AUBEUT <martin.aubeut@gmail.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
To test:
1. APPLY PATCH
2. Make sure you have item.itemcallnumber data.
3. Have some holds and build the holds queue: perl /kohadevbox/koha/misc/cronjobs/holds/build_holds_queue.pl
4. To make testing easier add the following to IntranetUserCSS:
.hq-callnumber .location { background: lightblue; }
.hq-callnumber .itemcallnumber { background: lightgoldenrodyellow; }
5. Run the holds queue and notice that the data in the 'Call number' column has a lightblue (location) and lightgoldenrodyellow (call number) background.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Emily Lamancusa <emily.lamancusa@montgomerycountymd.gov>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
To test:
1 - Place some holds in your system
2 - perl misc/cronjobs/holds/build_holdsqueue.pl
3 - View the holds queue
4 - Note there is no holding branch column
5 - APPLY PATCH
6 - Reload and try again
7 - Note the column is not there
8 - Click column setting gear to expose the column
9 - Go to Admin -> Table settings and make sure you can expose the column via Table settings
Signed-off-by: Michelle <mspinney@clamsnet.org>
Signed-off-by: Brendan Lawlor <blawlor@clamsnet.org>
Signed-off-by: Emily Lamancusa <emily.lamancusa@montgomerycountymd.gov>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
To recreate:
1. Select two items from the catalog and begin a merge.
2. Notice that the title of the items, their biblionumber and a
hyperlink to their MARC record is available.
3. Apply the patch and refresh the page. The biblionumber for each title
is now hyperlinked and leads to the item’s bib records.
4. Sign off and have a great day :)
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Emily Lamancusa <emily.lamancusa@montgomerycountymd.gov>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
To test:
1. APPLY PATCH
2. Log into the staff interface and use the browser's dev tools to look
for the HTML class 'loggedincategorycode'. It should match the
current logged in user's categorycode.
3. You could also use a console.log like so:
console.log( $('.loggedincategorycode').text() );
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Emily Lamancusa <emily.lamancusa@montgomerycountymd.gov>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Bug 35518 moved some code blocks to after the call to
get_user_and_template() so that userenv would be populated before it
was needed. This caused a couple variables to be set before the
AutoSwitchPatron block could prevent them from being set. Which broke
AutoSwitchPatron functionality. This clears two variable so that
AuthSwitchPatron works again.
The AutoSwitchPatron clears the $borrowernumber variable to switch
patrons. With the AuthSwitchPatron block moved, the $patron variable
still gets set, and the patron doesn't get switched. The clears the
$patron variable too.
Also clear the barcode list.
The AutoSwitchPatron block got moved, and now the @$barcodes variable
gets filled and not cleared. Leading to a 'Barcode not found' error
when the patron is auto switched.
Test plan:
1. Ensure AutoSwitchPatron is turned on.
2. Select the card number of two patron accounts.
3. Find the first patron in circulation.
4. Enter the second patron's card number in the item barcode field to
switch patrons.
5. Observe the error about item barcode not existing, and the patron did
not switch.
6. Apply patch and restart services.
7. Enter the second patron's card number in the item barcode field
again.
8. Observe that the patron was switched with no error about an invalid
barcode.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
When changing the fetch of holds, the check for non-priority was lost - added a loop to pull those out
so the totals and checks are correct
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Tidied (tcohen)
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This patch adds a new system prefernce, RESTAPIRenewalBranch, analogous to the existing OpacRenewalBranch system preference.
The preference allows choosing how the renewal branch is recorded in the statistics table.
In order ot preserve existing behaviour, the default is to use the api user's branch.
To test:
1 - Checkout some items to a patron
2 - Add an API user account with circulation permissions and a different homebranch
3 - POST a renewal to: http://localhost:8080/api/v1/checkouts/{checkout_id}/renewal
4 - Check statistics table and confirm the api users branch was used
5 - Apply patches, restart all
6 - Repeat API renewal, confirm same branch used
7 - Change the RESTAPIRenewal syspref
8 - Repeat API renewal and confirm specified branch is used
9 - Confirm the syspref works for all settings
Signed-off-by: Brendan Lawlor <blawlor@clamsnet.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
To test:
* Apply patch
* Verify the option "Other" for gender is correctly displayed when:
* Editing a patron record in the staff interface
* Viewing the 'Details' tab of a patron in staff interface
* Triggering a "duplicate" patron warning and looking at the details
of the existing patron record
* Self registering a patron in the OPAC
* Viewing 'Personal details' tab in the OPAC for a registered patron
* If you are using ktd, run: gulp po:update --lang de-DE
* Verify string "gender" appears with the occurences of "Other"and
"Other:" in
misc/translator/Koha-messages.pot
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This patch updates the system preferences interface so that it uses
country-list.inc for the selection of countries for the
UsageStatsCountry preference.
To test, apply the patch and restart services.
- Go to Administration -> System preferences and search for
"UsageStatsCountry"
- The dropdown of countries should look correct.
- Select a country, save, and confirm that your choice is saved
correctly.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Test plan:
Verify that you are able to toggle the column on the holdshistory
form.
Verify that you are able to hide the column via Table settings
by default.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Emily Lamancusa <emily.lamancusa@montgomerycountymd.gov>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Test plan:
Verify that column Call number now shows on the form.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Emily Lamancusa <emily.lamancusa@montgomerycountymd.gov>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
default to 5000 but tests are failing because of slow Jenkins's nodes.
We could try and extend to 10000 (10s) and see if it gets better.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Tests pass with and without the patch on my computer. Tested with:
yarn cypress run --env KOHA_USER=koha,KOHA_PASS=koha \
--spec t/cypress/integration/ERM/Agreements_spec.ts
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
To test:
1) Apply Bug 32476
2) Run tests in t/db_dependent/Patrons.t
3) This should produce multiple "Subroutine Koha::Patron::SUPER::dateexpiry redefined at ..." warnings
4) Apply patch
5) Run tests in t/db_dependent/Patrons.t again
6) The warnings in 3) should now no longer appear
Signed-off-by: matthias le gac <matthias@babel.inlibro.net>
Signed-off-by: Phan Tung Bui <phan-tung.bui@inlibro.com>
Signed-off-by: Emily Lamancusa <emily.lamancusa@montgomerycountymd.gov>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Prevent adding backend option if the option already exists
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Stephen Graham <s.graham4@herts.ac.uk>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>