If an attacker can get an authenticated Koha user to visit their page
with the code below, they can update the victim's details to arbitrary
values.
Test plan:
Trigger
/cgi-bin/koha/opac-memberentry.pl?action=update&borrower_B_city=HACKED&borrower_firstname=KOHA&borrower_surname=test
=> Without this patch, the update will be done (or modification
request)
=> With this patch applied you will get a crash "Wrong CSRF token" (no
need to stylish)
Do some regression tests with this patch applied (Update patron infos)
QA note: I am not sure it's useful to create a digest of the DB pass,
but just in case...
Reported by Alex Middleton at Dionach.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
To make sure the return can be done, AddIssue must not trust callers (they
should have done their job, but we are not sure) and check that the issue can
be returned before issuing to the patron.
There is no test plan here, this should not be possible from the Koha
interface.
However, looking at the code, it may be possible using SIP.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
If an issue is already checked out, CanBookBeIssued must check if the
issue can be checked in before processing the return.
In such cases (depending of the AllowReturnToBranch pref), the issue
should not be allowed.
Prior to this patch, the checkin was not done and the checkout failed
with "Duplicate entry '1204321' for key 'itemnumber'". Indeed since bug
14978, there is an uniq key on issues.itemnumber. Before bug 14978 the
issue existed but was hidden (and some weird behaviors certainly
happened!).
To avoid Koha to crash, a check is added to CanBookBeIssued (call to
CanBookBeReturned) and the librarian is not able to process the
checkout.
Test plan:
- Set AllowReturnToBranch to anywhere
- Check an item (homebranch Library 1, holding branch Library 1) out from Library 1
- Check the item out from Library 2
=> Confirm the checkout (should work with and without this patch)
- Set AllowReturnToBranch to holdinbranch ("only the library the item
was checked out from").
- Check an item (homebranch Library 1, holding branch Library 1) out from Library 1
- Check the item out from Library 2
=> Without this patch, Koha crashed
=> With this patch, you will be warned that the checkin is not possible.
Try other combinations of the AllowReturnToBranch syspref
Followed test plan, works as expected
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
An improper method call was left over in C4::Serials::NewIssue from the
switch from DBIx::Class to Koha::Object.
Test Plan:
1) prove t/db_dependent/Serials.t
2) Note the errors
3) Apply this patch
4) prove t/db_dependent/Serials.t
5) No errors!
Signed-off-by: Jacek Ablewicz <abl@biblos.pk.edu.pl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
With the global %default_values_for_mod_from_marc variable, the changes
made to the marc_subfield_structure table and especially the links
between MARC and DB fields are not safe and might be outdated (if a
field is linked/unlinked)
Test plan:
Under Plack:
- Link the barcode field, edit a record and set a barcode.
- Remove the mapping for the barcode field and then update again the
barcode of the record.
The items.barcode DB field must not have been updated.
Without this patch, the field should have been updated.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Added a new sub to Serials.pm to be able to get serials with their statuses.
Now the sub ModSerialStatus checks for other serials with an "expected" status before doing anything.
Also modified Serials.t to be able to test those changes.
Test Plan
1) Apply patch
2) Run ./t/db_dependent/Serials.t
3) Validate that there are no errors
4) Go on "Serial collection information" page for a serial of your choice
5) Click on "Generate next"
6) Change the status of the original serial from "late" to "expected"
7) Change the newly generated serial from "expected" to "delete"
8) Validate that there are no new serials created by instruction 7 and that the serial was deleted
9) Run ./t/db_dependent/Serials.t
With QA Fixes
- Use the constant instead of the code (1 vs EXPECTED)
- Avoid interpolation in query
- use selectall_arrayref instead of fetchall_arrayref
Signed-off-by: Liz Rea <liz@catalyst.net.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
To test:
1) Go to Serials -> Manage numbering patterns
2) Create .New Numbering Pattern.
3) Type in a name of 'Day, Month, Season' and a numbering formula of '{X} {Y} {Z}'.
4) Set up the X field as following: add 1, every 1, set back to 1, when more than 30.
5) Select the formatting for X. There should be six options available instead of the original three. Use the formatting 'Name of Day (abbreviated)'.
5) Set up the Y field to add 1 every 30 reset back to 1 when more than 12. Use the formatting option 'Name of month (abbreviated)'.
6) Set up the Z field to add 1 every 90 reset back to 1 when more than 4. Use the formatting option 'Name of season (abbreviated)'.
8) Select a frequency of 1/day.
9) Select a first issue publication date of Jan 1, 2016.
10) Set X to begin with 5 and have an inner counter of 5. Set Z to begin with 3 and have an inner counter of 10.
11) Click the 'Test Pattern' button.
12) Abbreviated versions of the day, month and season should appear in the test pattern.
Signed-off-by: sonia bouis <sonia.bouis@univ-lyon3.fr>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Added optional dependency, so as to explain why testing
explodes when the Enhanced Content system preference
TagsExternalDictionary is set. It is optional, because not only
does TagsExternalDictionary have to be set, but TagsEnabled
must be 'Allow'.
Also tweaked C4/Tags.pm to ignore TagsExternalDictionary,
if Lingua::Ispell is not installed. A warning is given.
TEST PLAN
---------
1) Set the Enhanced Content system preference
TagsExternalDictionary to /usr/bin/ispell
2) sudo apt-get install liblingua-ispell-perl
-- should be a new install
3) prove t/db_dependent/Tags.t
-- should work fine
4) sudo apt-get remove liblingua-ispell-perl
5) prove t/db_dependent/Tags.t
-- should explode
6) Clear the Enhanced Content system preference
TagsExternalDictionary
7) prove t/db_dependent/Tags.t
-- should work fine
8) apply patch
9) prove t/db_dependent/Tags.t
-- should work fine
10) Set the Enhanced Content system preference
TagsExternalDictionary to /usr/bin/ispell
11) prove t/db_dependent/Tags.t
-- should work, with warning.
12) sudo apt-get install liblingua-ispell-perl
13) prove t/db_dependent/Tags.t
-- should work fine
14) run koha qa test tools.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Post-hackfest hotel Olympia lobby signoff. Kalimera!
Works as expected.
At this moment the Tags.t test does not need the database btw,
but the module should have much more test coverage.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Initialize file level lexicals each call. Do not call _initialize
outside the module.
Adjust test by mocking preferences.
Test plan:
Run t/db_dependent/External_BakerTaylor.t.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Tested module with trivial script under Plack/memcached by toggling
the associated preferences.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Since the tests are expecting an initialize function, the
initialize call was just moved outside of the INIT block.
TEST PLAN
---------
1) prove t/00-load.t
-- warnings about INIT for BakerTaylor
2) prove `git grep -l BakerTaylor | grep [.]t$`
-- should all run okay
3) apply patch
4) repeat steps 1 and 2
-- warning should be gone, and everything else run okay
5) run koha qa test tools
Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Signed-off-by: Florent Mara <florent.mara@gmail.com>
NOTE: Tweaked test plan based on comment #4,
Added sign off based on comment #6.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
[1] $branch is only related to line 123 as fallback.
[2] $width moved to a constant; sub width is not used.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Tested the corresponding plugin in item editor.
Test t/db_dependent/Barcodes.t and Barcodes_ValueBuilder.t still pass.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
According to http://perldoc.perl.org/vars.html, "our" should
be a reasonable substitute for the "use vars". By declaring as
"our", and removing the INIT, prove t/00-load will no longer
generate a warning about INIT for the C4/Barcodes/hbyymmincr.pm
module.
TEST PLAN
---------
1) prove t/00-load.t
-- warnings about INIT for hbyymmincr
2) prove `git grep -l hbyymmincr | grep [.]t$`
-- should all run okay
3) apply patch
4) repeat steps 1 and 2
-- warning should be gone, and everything else run okay
5) run koha qa test tools
Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 14507 introduced the use of checkpw in C4::SIP::ILS::Patron so that
non-Koha internal authentication processes would be able to function via
SIP ( LDAP et al ).
The problem is that checkpw changes the userenv to that of the patron!
This is not usually an issue in Koha because most of the time that
patron running through checkpw is the one to be logged in.
Aside from SIP2 the only other area where this may be an issue is in SCO
when using SelfCheckoutByLogin.
Test Plan:
1) On master, check out an item to a patron via SIP2
2) Note the checkout lists the item as having been checked out
from the patron's home library not matter which library is was
supposed to be checked out from.
3) Apply this patch
4) Re-checkout the item
5) The item should now be checked out as if it was checked out from
the library as defined in the SIP configuration file.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Looking at
http://cpansearch.perl.org/src/DROLSKY/Exception-Class-1.40/Changes
there is no need to require 1.39
Signed-off-by: Jacek Ablewicz <abl@biblos.pk.edu.pl>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Caused by bug 16442.
Now we need to mock the marcflavour pref
Test plan:
prove t/Ris.t
should return green
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
The routine calls GetMarcStructure and does not use its return value
after all.
Test plan:
Run t/db_dependent/Items.t
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
The subroutine _build_default_values_for_mod_marc takes the
frameworkcode in parameter, but ModItemFromMarc did not pass it.
It uses it to know if a field is mapped or not to a Koha field
(C4::Koha::IsKohaFieldLinked).
Consequently the default framework ("") was always used.
This bug has been found working on bug 13074 and has been put on a
separate bug report to ease the backport.
Test plan:
Without this change, the tests added by bug 16428 won't pass
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
C4::Letters::getletter use a package variable (%letter) to cache letter
returned by the subroutine.
I have not found any direct issues caused by that but it is safer to
remove it.
It won't be a big deal to hit the DBMS to get a valid letter when
needed.
No test plan here, just confirm that the changes make sense.
Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Confirm that performance loss is just a millisecond or so per
subsequent call of getletter.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
If the prefs is updated, the fields won't be.
To make sure we already fetch updated values, we should remove the
package variable and define it in the subroutine.
There is not test plan, just make sure the changes are consistent.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
The pref TagsExternalDictionary is used to tell Lingua::Ispell to use an
other dictionary, different from the default one (/usr/bin/ispell).
To do so we need to set $Lingua::Ispell::path to the expected path.
It's currently done in the INIT block.
If you try to use C4::Tags, you will get the famous "Too late to run
INIT block at C4/Tags.pm line 74." warning. Plack use the INIT block to
load functions at run time, when we are using C4::Tags when hitting a pl
script, the compilation phase is finished and it's "too late to run INIT
block" from C4::Tags.
I do not really know if it has an impact on the behavior of
Lingua::Ispell (i.e. is the path redefined?), but I know that this INIT
block is not executed when we want.
Test plan:
under Plack,
- hit /cgi-bin/koha/opac-search.pl and confirm that the warning does no
longer appears
- Use another dictionnary (??), fill TagsExternalDictionary with its
path and confirm that it is used by the tags approval system
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
C4::Tags use a package variable to cache the pref
TagsExternalDictionary, it's not needed and not safe.
There is not test plan, just make sure the changes are consistent.
Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
The goal of this patch is to avoid unecessary flush of the L1 cache on
creating a new CGI object each time C4::Languages::getlanguage is called
without a CGI object.
The new class Koha::Cache::Memory::Lite must be flushed by the CGI
constructor overide done in the psgi file. This new class will ease
caching of specific stuffs used by running script.
Test plan:
At the OPAC and the intranet interfaces:
Open 2 different browser session to simulate several users
- Clear the cookies of the browsers
- User 1 (U1) an User 2 (U2) should be set to the default language
(depending on the browser settings)
- U1 chooses another language
- U2 refreshes and the language used must be the default one
- U2 chooses a third language
- U1 refreshes and must be still using the one he has choosen.
Try to use a language which is not defined:
Add &language=es-ES (if es-ES is not translated) to the url, you should
not see the Spanish interface.
Signed-off-by: Jacek Ablewicz <abl@biblos.pk.edu.pl>
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
C4::Ris incorrectly uses 4 package variables:
- $utf: not used, can be removed
- $intype: set to marcflavour once, but later it assumes that it is
usmarc if not defined
- $marcprint: always 0, so set it to 0
- $protoyear: only used in 1 subroutine, let's define it at this
level
Test plan:
Just make sure the RIS export works as before this patch
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Previous to bug 14507, SIP2 only did internal authentication. A change
to the way we check empty passwords has caused any empty password to
send back a CQ of Y. Previous to that patch set, a CQ of Y would only be
sent back of the patron password column was NULL. Now, an empty AD field
*always* returns a CQ of Y.
Test Plan:
1) Send a patron information request with an empty AD field
Note: You must send the AD field or you won't get back a CQ field
2) Note you get back a CQ of Y
3) Apply this patch
4) Repeat step 1
5) Note you now get back a CQ of N
Signed-off-by: Trent Roby <troby@bclib.info>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Simple patch for a silly error, this single line is going to fix a
critical bug.
If a patron attribute is limited to a library, all the values for that attributes
for every patrons will be deleted.
Test plan:
Create a patron attribute limited to a library
Set the the attribute for a patron
Set the the attribute for another patron
=> Without this patch applied, the attribute's value for the first
patron is deleted
=> With this patch applied, the 2 values exist in the DB after the
second edition
Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Holds that have expired have been untranslatable in Patron's Fines-tab. Also, they are
mixed with other type of fines with accounttype "F". This patch gives expired holds an
own accounttype "HE" (Hold Expired) and modifies the boraccount to recognize this new
accounttype in order to make it translatable.
To test:
1. Make a hold and let it expire
2. Go to Patron's Fines tab
3. Change Koha's language to some other than English
4. Observe that there is a "Hold waiting too long" fine described in English
5. Apply patch
6. Make another hold and let it expire
7. Update translations
8. Find "Hold waiting too long" from your .po file
9. Translate it and install translations
10. Go back to Fines tab and observe that the new expired hold is translated
Signed-off-by: Olli-Antti Kivilahti <olli-antti.kivilahti@jns.fi>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
If the limit for number of items checked out is reached, the message box
shows up but is empty.
Test Plan:
1) Disable AllowTooManyOverride
2) Check out items to a patron until the patron has reached the limit
of checkouts he or she can have
3) Try to check out one more item
4) Note the empty message box
5) Apply this patch
6) Try to check out one more item again
7) Note the message is now visible
Signed-off-by: Nicolas Legrand <nicolas.legrand@bulac.fr>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
On the same way as bug 14522, we should use Koha::Cache to cache
exception_holidays.
It's not safe to use a package variable if running under Plack.
There is not test plan, just make sure the changes make sense.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Just that
To test:
1) run koha_perl_deps and check it show up
The module appears now on the About page.
Signed-off-by: Marc Véron <veron@veron.ch>
Ammended patch, only change is DBIx::RunSQL version,
now 0.14 :)
Module's author kindly accept to upgrade it, in particular
this makes Bug 16572 innecesary and is not needed to install
without problems.
Tested install on Ubuntu 14.04/Mysql 5.5.49, marc21 + all sample
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Test plan:
1 - prove t/db_dependent/Barcodes.t
2 - All should pass
3 - Apply first patch (unit tests update)
4 - Tests should fail on values and warnings
5 - Apply second patch
6 - All tests should now pass
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Work as described
Removed tab on line 47 of C4/Barcodes/hbyymmincr.pm
No more qa errors
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch fixes an issue with the expiration dates for news always reverting to today if empty.
To test:
- Apply patch
- Go to Home > Tools > News
- Create a news item, do not set expiration date
- Verify that expiration date stays empty
- Edit this news item
- Do not set expiration date
- Verify that expiration date stays empty
- Do the same with expiration dates
- Verify that they are saved properly
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch redirect STDERR to a variable to retrieve the errors raised
by the DBMS when loading a sql file, it could be useful to debug errors.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
It's better of course, trying to load a failed fiel
it outputs mysl errors
DBD::mysql::st execute failed: You have an error in your SQL syntax...
No errors
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch prevents crashing in case an
error is detected when loading a file
To test:
1) Apply patch
2) Mangle kohastructure.sql or any sample
file adding and invalid SQL line
3) Run webinstaller and check that the error
is handled gracefully
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Alternative POC solution, on top of
previous patches, feel free to obsolte.
This patch use DBIx::RunSQL->run_sql_file
to procees each sql file.
To test:
1) Apply all patches
2) Same test plan of patch 1
Timing test running web installer, marc21,
all sample data, time in seconds
a) without patch
structure data
59.7 66.5
58.6 66.0
b) SQL::SplitStatement (patch 1+2)
59.4 101
59.7 102
c) DBIx::RunSQL (patch 3)
60.7 66.8
59.4 66.2
Tomas' version is a bit slower loading sample data,
all give similar results processing kohastructure.
New dependency to package: DBIx::RunSQL
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch changes C4::Installer::load_sql so it uses File::Slurp [1] to read
the SQL files, and SQL::SplitStatement to extract the statements from the full SQL
file so they can be passed to $dbh->do.
To test:
- On Mysql 5.5, run the webinstaller
=> SUCCESS: Everything works as expected
- Apply the patch
- Run
$ mysql -uroot
> DROP DATABASE koha_kohadev ; CREATE DATABASE koha_kohadev;
- Run the webinstaller
=> SUCCESS: Everything works as expected
- On Mysql 5.6+ (5.7 is implied)
- Run
$ mysql -uroot
> DROP DATABASE koha_kohadev ; CREATE DATABASE koha_kohadev;
- Run the webinstaller
=> FAIL: It cannot load the sql files due to a password-in-command-line error
- Apply the patch
- Make sure everything is clean (it should):
$ mysql -uroot
> DROP DATABASE koha_kohadev ; CREATE DATABASE koha_kohadev;
- Run the webinstaller
=> SUCCESS: EVerything works as expected
- Sign off :-D
[1] Note: This is a POC patch, in the sense that it does the job, fixes a nasty problem
but using File::Slurp to load the SQL files in memory comes with a big runtime penalty.
You will notice the install procedure is now much slower, for instance.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Note that few other occurrences exist in DB.
This patch also replaces a tab with 4 spaces.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch is a follow-up of bug 16154.
It removes the warning "CGI::param called in list context" in the
following scripts:
admin/branches.pl
admin/categories.pl
admin/patron-attr-types.pl
admin/preferences.pl
catalogue/image.pl
circ/circulation.pl
patroncards/add_user_search.pl
serials/add_user_search.pl
tools/marc_modification_templates.pl
virtualshelves/shelves.pl
Note that the warning from catalogue/itemsearch.pl still exists (the
call to CGI->param is done from the template).
Test plan:
- Add/modify a library, patron category, patron attr type
- Update a syspref
- Set localcoverimage and call catalogue/image.pl?biblionumber=XXX
- Search for patrons in the patron cards or serials module
- Add a marc modification templates
- Add a list (shelves)
You should not get the warning in the log after all these actions.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This uses a hacky but simple method to get the correct script name under
proxied packaged Plack.
Test plan:
1) Log out of both the OPAC and staff side.
2) Try to access a page that requires login (opac-reserve.pl is a
good one for the OPAC), then log in.
3) You will be redirected back to mainpage.pl or opac-user.pl.
4) Repeat above for both staff side and OPAC.
5) Apply patch.
6) Repeat steps 1-4; you should be redirected back to the original
page you were on.
7) Repeat the above for both a traditional CGI and kohadevbox/package
Plack installation.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
If you enable send_patron_home_library_in_af in your sip account, you
want a separate AF field for the home branch.
Test plan:
Send a 63 (Patron Info) and verify that you have an extra AF.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Tested Patron Status and Patron Info.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
It appears that somehow the adding of issue_id to accountlines for new
fines was missed! This is incredibly important, otherwise UpdateFine
will always create a new fine!
Test Plan:
1) Create a new overdue checkout
2) Run fines.pl to generate an accountline for it
3) Note it has no issue_id
4) Apply this patch
5) Repeat steps 1 and 2
6) Note it now has an issue_id!
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 15840 tried to fix a bug but makes things more complicated than it
was before.
If an userid is not provided for 1 or more rows of the csv file, it
should not be updated. However, if a userid is provided and it already
used by an other patron, the import should fail for this row (but not
crash!).
Test plan:
0/ Create a patron with a userid=your_userid
1/ Use the import patron tool to update this userid
=> userid should have been updated
2/ Update another data and do not provide the userid
=> data should have been updated and not the userid
3/ Update another data and provide the userid, but set it to an empty
string, or '0'
=> data should have been updated and not the userid
4/ Update another patron, and set userid=your_userid
=> Update should fail and an error whouls be displayed ("already used by
another patron")
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
This is a quick and dirty way to fix a bad bug in a messy area.
The "unknown status" tab in the suggestions table display all the
suggestions. It should only display suggestions with a STATUS=''
Test plan:
- Create some suggestions
- Go to Home > Acquisitions > Suggestions management
- Edit some suggestions and give them different status,
e.g. accepted, rejected, pending.
- Verify that they appear in the tabs as appropriate
- Edit one suggestion, set "Mark selected as" to --Choose a status--
=> Without this patch: New tab "Status unknown" containing all
suggestions
=> With this patch: tab contains only suggestions with "Unknown status"
Works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Brendan Gallagher <bredan@bywatersolutions.com>
This patch adds subtitle information to the display of titles in the
OPAC's shelf browser.
To test, apply the patch and make sure OPACShelfBrowser is enabled.
- View the detail page for any title in the OPAC which has items.
- Click the "Browse shelf" link next to any item in the holdings table.
- The titles in the shelf browser should display with all subtitle
information as defined in Keywords to MARC mapping.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Adding 245a and c as 'subtitle' in Keywords to Marc make them
show on shelf browser.
No errors.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher <bredan@bywatersolutions.com>
Don't retrieve prefs if we won't need them
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Set variables ($sysxml, $xslfilename, $lang) if they are not passed to
the subroutine. This happens from catalogue/detail.pl,
opac/opac-shelves.pl, opac/opac-tags.pl and virtualshelves/shelves.pl.
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
On search, every single result goes through some XSLT processing.
This includes fetching the relevant sysprefs every single time.
We should do it only once per search.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This should trigger the error. Attempts to shift system time
zones did not make sense as to the number of failures.
Added Time::Fake dependency, if it isn't installed these extra
tests don't run. There is a nice skip message about it.
Added License text.
TEST PLAN
---------
1) apply test patch
2) sudo dpkg-reconfigure tzdata
-- set your system time to GMT (Africa/Abidjan)
3) prove t/Circulation/AgeRestrictionMarkers.t
-- should not fail, even if you change system
time to any time.
4) sudo dpkg-reconfigure tzdata
-- set your timezone to Eastern
5) sudo date -s"2015-06-18 21:15:00"
6) date
-- should be past 9pm Eastern timezone
7) prove t/Circulation/AgeRestrictionMarkers.t
-- kaboom!
8) sudo date -s"2015-06-18 12:00:00"
9) date
-- should be noon Eastern timezone
10) prove t/Circulation/AgeRestrictionMarkers.t
-- success?! Time sensitive tests are bad tests.
11) sudo apt-get install libtime-fake-perl
12) prove t/Circulation/AgeRestrictionMarkers.t
-- kaboom!
-- changing timezone to anything other than GMT
should trigger a kaboom.
13) apply fix patch
14) prove t/Circulation/AgeRestrictionMarkers.t
-- should work all the time.
15) less t/Circulation/AgeRestrictionMarkers.t
-- the license text should be similar to
http://wiki.koha-community.org/wiki/Coding_Guidelines#Licence
16) koha qa test tools.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
It is best to test when UTC date is a date in the future compared
to your timezone. I'm in Eastern, so right now, I expect this
test to fail for another 2.5 hours.
TEST PLAN
---------
1) prove t/Circulation/AgeRestrictionMarkers.t
-- fails for PEGI 15 after 9pm.
2) Apply patch
3) prove t/Circulation/AgeRestrictionMarkers.t
-- works.
4) koha qa test tools
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch adds three parameters to the cron job: -before and -after, and
-branch.
You can run the cronjob now in an adjusted frequency: say once a week with
before 6 or after 6 (not both together). If your pref is set to 14, running
before=6 will include expiries from 8 days to 14 days ahead. When you
use after=6, you would include 14 days to 20 days ahead, etc.
You could also rerun the job of yesterday by setting before=1 and after=-1;
this could help in case of problem recovery.
Obviously, the branch parameter can be used as a filter.
NOTE: Why are these parameters passed only via the command line?
Well, obviously the branch parameter is not suitable for a pref.
The before/after parameter allows you to handle expiry mails different from
the normal scheme or could be used in some sort of recovery. In those cases
it will be more practical to use a command line parameter than editing a
pref.
NOTE: The unit test has been adjusted for the above reasons, but I also
added some lines to let existing expires not interfere with the added
borrowers by an additional count and using the branchcode parameter.
Test plan:
[1] Run the adjusted unit test GetUpcomingMembershipExpires.t
[2] Set the expiry date for patron A to now+16 (with pref 14).
Set the expiry date for patron B to now+11.
[3] Run the cronjob without range. You should not see A and B.
[4] Run the cronjob with before 3. You should see patron B.
[5] Run the cronjob with before 3 and after 2. You should see A and B.
[6] Repeat step 5 with a branchcode that does not exist. No patrons.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Work as described following test plan.
Test pass
No errors
New parameters work with one (-) or two(--) dashes, no problem
with that but convention suggest that 'long' options use two-dashes.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Removes:
Use of uninitialized value in string eq at /home/koha/kohaclone/C4/ILSDI/Services.pm line 373.
Use of uninitialized value in string eq at /home/koha/kohaclone/C4/ILSDI/Services.pm line 390.
Use of uninitialized value in string eq at /home/koha/kohaclone/C4/ILSDI/Services.pm line 399.
Use of uninitialized value in string eq at /home/koha/kohaclone/C4/ILSDI/Services.pm line 423.
Test plan:
Run t/db_dependent/ILSDI_Services.t
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch makes it possible to limit a patron search to
search just for surnames.
To test:
- Apply the patch
- Add two patrons, called e.g. "John Doe" and "Doe John"
- Go to Patrons in the Intranet
- Make sure you have selected "Search fields" = Standard
- Search for "john" and verify both patrons show up
- Search for "doe" and verify both patrons show up
- Set "Search fields" = Surname and search for "john".
"Doe John" should show up, but not "John Doe".
- Set "Search fields" = Surname and search for "doe".
"John Doe" should show up, but not "Doe John".
Update: Revised the last point in the test plan.
Sponsored-by: Alingsås Public Library, Sweden
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
There are 2 prefs to drive this feature: StaffAuthorisedValueImages and
AuthorisedValueImages. AuthorisedValueImages is not added by
sysprefs.sql and does not appear in updatedatabase.pl, we could easily
imagine that nobody uses it.
With XSLT enabled, the feature is only visible on a record detail page
at the OPAC, if AuthorisedValueImages is set. Otherwise you need to turn
the XSLT off. In this case you will see the images on the result list
(OPAC+Staff interfaces) and OPAC detail page, but not the Staff detail
page.
This patch suggests to remove completely this feature as it does not
work correctly.
The ability to assign an image to an authorised value is now always
displayed, but the image will only be displayed on the advanced search
if defined.
Test plan:
Confirm that the authorised value images are no longer visible at the
opac and the staff interfaces.
The prefs should have been removed too.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Removes a warn and some commented warns.
Test plan:
Nothing to do here. Will be covered later by additional unit test.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This seems to cause fewer problems with the existing acquisitions code.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This allows creation of special baskets that include standing orders.
These orders do not have a known quantity (and may not have a known
price in advance). Upon receipt, the received items are split into a new
completed order.
Test plan:
1) Run updatedatabase.pl.
2) Run prove t/db_dependent/Acquisition/StandingOrders.t . (and the
other Acquisition tests).
3) Create a new basket, mark it as a standing order basket.
4) Add an order to this basket, and notice that the quantity field is
missing (and thus not required).
5) Receive items for this order, and notice that the original order is
unchanged. The new child order line should have the correct price
and quantity information.
(Note: the QA tools output what seems to be a spurious spelling error
for Test::More's "isnt" in StandingOrders.t.)
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch adds a test to check the unicity of auth cats, simplify
the GetBudgetAuthCats subroutine and make it return an arrayref of scalar
instead of an arrayref of hashref with only 1 key.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
When displaying a budget, the Planning button in the admin toolbar displays
Plan by months
Plan by libraries
Plan by item types
Plan by
The last one is empty, due to C4::Budgets::GetBudgetAuthCats returning an empty field if the budget has no sort defined.
This prevents returning an array with empty element(s)
TEST:
1) Admin -> Budgets
2) Select a budget
a) you must have '' (empty) in your aqbudgets.sort1_authcat field.
b) edit the budget (direct DB or interface) to get that.
3) Click on Planning dropdown, see the "Plan by <nothing> " entry.
4) apply the patch, revalidate.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
No more empty option
No errors
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
[1] Remove a vim inserted i from XSLT.pm: IdRefi => IdRef.
[2] The comment about UNIMARC is somewhat confusing. Rephrased it.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Add option show or no inactive budget and more options
Use subroutine GetBudgetHierarchy for return all budgets
Delete subroutine GetBudgetPeriodDescription and theire tests
Use Price TT plugin
Correct name of column and capitalization the first letter
Add checkbox for show inactive budgets, default the drop down list containt a active budget
Not use [i] for inactive budgets, i add (inactive) at the end of inactive budget
Add vendor note in the list of show attribute
Test case:
Go to Home > Reports > Orders by fund
Select one or all budgets
You can show the inactive budget, default the drop down list containt a active budget
Choose output to screen ou csv file
Works as expected. QA tools OK with Bug 16104 applied.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
- changed 'Fund (budget):' back to 'Fund:', as the budget
no longer shows in the pull down.
- Fixed number of tests in Budgets.t
- Removed &GetBudgetPeriodDescription
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch allows the high holds loan length decrease to be overridden
either by a checkbox that remembers its setting during a series of
checkouts, or by a one time use override checkbox that will show
in the warning popup if a checkout is affected by high holds.
Test Plan:
1) Set up a checkout that will be affected by decreaseLoanHighHolds
2) Attempt to check out an item
3) Check the override checkbox
4) Note the checkout date is not reduced
5) Return the item
6) Start a new checkout for the patron
7) Check the "Don't decrease lean length based on holds" checkbox
8) Check out the item
9) Note you are not warned about the high holds decrease
and that the checkout length is not reduced
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Christopher Brannon <cbrannon@cdalibrary.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This enhancment allows a library to prevent patrons from checking out
items if his or her guarantees own too much.
Test Plan:
1) Apply this patch
2) Find or create a patron with a guarantor
3) Add a fine to the patron's account
4) Set the new system preference NoIssuesChargeGuarantees to be less
than the amount owed by the patron
4) Attempt to check out an item to the guarantor, you will either
be warned or prevented from checking out based on your system
settings.
Signed-off-by: Cathi Wiggin <CWIGGINS@arcadiaca.gov>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Some libraries would like to prevent patrons from placing holds on
items where there are other items available for the patron to
check out.
Test Plan:
1) Apply this patch
2) Browse to the circulation rules
3) Note the new option for "On shelf holds allowed"
4) Set the rule to "If all unavailable", set "item level holds" to allow
5) Find a patron/branch/itemtype applicable to this rule
6) Ensure at least one item on the record is available for the
patron to check out
7) Attempt to place a hold for the item
8) Note you cannot place the hold
9) Check the available item out to another patron
10) Note you can now place a hold for the first patron
Signed-off-by: Andreas Hedström Mace <andreas.hedstrom.mace@sub.su.se>
Works as intended!
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Adding reserves.itemtype made a query to fail in CanItemBeReserved.
This patch prefixes the column names with the corresponding table names
to prevent that.
You can trigger the error by running
prove t/db_dependent/Holds.t
You should see something like this:
Column 'itemtype' in where clause is ambiguous
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Some libraries would like the ability to select the itemtype to request
when placing holds. For example, if a record has 3 copies of BookA and 3
copies of BookA in large print, this feature would allow a person to
place a hold on the record, but still be able to target only the Large
Print edition so that the first Large Print copy that becomes available
is targeted, rather than forcing the patron to select a particular copy
to hold.
Test Plan:
1) Apply this patch
2) Run updatedatabase.pl
3) Create a record with items of two or more itemtypes
4) Place a record level hold on the record while choosing one particular
itemtype
5) Check in an item from the record that is not of that itemtype
6) Notee it is not trapped for the hold
7) Check in an item from the record that does match the selected itemtype
8) Note the item is trapped for the hold
Signed-off-by: Andreas Hedström Mace <andreas.hedstrom.mace@sub.su.se>
Signed-off-by: Benjamin Rokseth <benjamin.rokseth@kul.oslo.kommune.no>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Some libraries would like to be able to limit hold filling to items that
match the pickup library for a hold based on the item's home or holding
library. The patron's home library should not affect whether a patron
can place the hold, instead the hold will only be fillable when an item
matching the pickup location becomes available.
Test Plan:
1) Apply this patch
2) Run updatedatabase.pl
3) Note the new "Hold pickup library match" rules for "checkout, hold,
and return policy" and for "holds policy by item type"
4) Set the policy to "item's holding library"
5) Place a hold where the item's holding branch does not match
the pickup branch
6) Check in the item
7) Note it is not trapped for the hold
8) Update the item's holding branch to match the pickup branch
8) Check in the item
9) Note the item is trapped for the hold
10) Repeat steps 4-9 but for home branch instead
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works as described
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
This patch removes the mysqlism (see comment #18)
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Fixed QA tools complaints about missing lines before
and after =cut in POD.
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
To reproduce issue:
See comment #1
To test:
- Apply patch
- Leave syspref StatisticsFields empty
- Display statistics for an author
=> Result: Table displays Shelving location, Collection code, Item type
(as before)
- Change syspref to any combination of location|itype|ccode
=> Result: Table displays columns as appropriate
- Change syspref to some garbage
=> Result: Same as with empty syspref (was crashing without patch)
- Change syspref to valid combination with trailing |
=> Result: Table displays columns as appropriate (was crashing
without patch)
- Change syspref to a combination of valid and invalid fields
(location|blah|ccode)
=> Result: Table displays column of valid fields only (was crashing
without patch)
Signed-off-by: Aleisha <aleishaamohia@hotmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Overdues.pm line 588 tries to do an $accountline->set with column outstanding
instead of amountoutstanding.
This patch fixes it.
To test:
- Verify that code change is correct.
- Try to trigger a situation where an existing fine is updated
(see comment in line 574 in C4/Overdues.pm)
Signed-off-by: Jacek Ablewicz <abl@biblos.pk.edu.pl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
This patch does the same as the previous one, but affects lines which
have not been caught by the regex.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
The zebraqueue table should still be populated with updates if ES is enabled, so
the Zebra indexer keeps the Z39.50/SRU indexes up to date.
To test:
- Set SearchEngine = Elasticsearch
- Watch for zebraqueue changes
$ watch -n 0.5 'echo "SELECT COUNT(*) FROM zebraqueue WHERE done=0" | sudo koha-mysql kohadev'
- Call touch_all_biblios.pl to simulate record changes
$ sudo koha-shell kohadev ; cd kohaclone
$ perl misc/maintenance/touch_all_biblios.pl -v
=> FAIL: Notice the watch is not changing the number of records to be indexed.
- Apply the patch
- Call touch_all_biblios.pl to simulate record changes
$ sudo koha-shell kohadev ; cd kohaclone
$ perl misc/maintenance/touch_all_biblios.pl -v
=> SUCCESS: The count raises (more than 0) and the zebra indexer picks the updates.
- Sign off
Signed-off-by: Chris <chrisc@catalyst.net.nz>
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
By default ES returns the facet terms ordered by most used, which makes
sense.
This patch removes resort done in the scripts (catalogue/search.pl and
opac/opac-search.pl) and moves it to the module.
For Zebra it's now done in C4::Search::getRecords, and there is no
change to expect (still alphabetically).
On the Elastic search side, we could imagine to let the library define
the order of the facets. The facet terms are now sorted by most used.
To test easily this change, turn on the displayFacetCount pref.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
This reverts commit cd4905c2969b067476881016d0b03271f0bcc7c8.
This commit caused an error in C4::Search::GetFacets when running in
zebra mode.
Conflicts:
Koha/SearchEngine/Elasticsearch/Search.pm
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
By default ES returns the facet terms ordered by most used, which makes
sense.
This patch removes resort done in the scripts (catalogue/search.pl and
opac/opac-search.pl) and moves it to the module.
For Zebra it's now done in C4::Search::getRecords, and there is no
change to expect (still alphabetically).
On the Elastic search side, we could imagine to let the library define
the order of the facets. The facet terms are now sorted by most used.
To test easily this change, turn on the displayFacetCount pref.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
When creating a patron attribute type, there is a "Allow password"
checkbox. If checked, the librarian will be able to enter a password for
this patron attribute when editing a patron.
The goal was to allow a patron to log in with a secondary password.
However, this feature has never been implemented.
"""
commit 6fc62bcd32
CommitDate: Mon May 12 09:03:00 2008 -0500
extended patron attributes tables & syspref (DB rev 081)
- password_allowed (if set, staff patron editor will
allow a password to be associated with a value; this
is mostly a hook for functionality to be implemented
in the future.
"""
To decrease maintainability, this patch suggest to remove the 2 DB fields
borrower_attributes.password and
borrower_attribute_types.password_allowed
If they have not used by the library.
Test plan:
- Edit a patron attribute type and select "allow password"
- Edit a patron and defined a password for this attribute
- Execute the DB entry
- Note that you get a warning
- Empty the password field
- Execute the DB entry
- You do not get the warning and the 2 DB fields have been removed
Signed-off-by: Marc Veron <veron@veron.ch>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Currently if not logged in when browsing to
http://YOURCATALOG/cgi-bin/koha/sco/sco-main.pl
You are redirected to opac-auth.tt and SCOUserCSS and SCOUserJS are not
loaded. This page passes through a parameter to the template to indicate
this is an SCO login and appropriate CSS and JS should be loaded.
Additionally this patch ensure that when loggin in using the form you
are redirected to the sco-main.pl instead of the patron account page for
the user.
To test:
1 - Verify that normal login works on both staff and opac
2 - Verify that SCO link goes to login page if AutoSelfCheckAllowed is
set to "Don't allow"
3 - Enter changes into SCOUserJS and SCOUserCSS and observe these are
present on SCO log in page with AutoSelfCheck disabled
4 - Verify that a logged in opac user without permissions cannot access
the self-checkout module
5 - Verify that AutoSelfCheckAllowed and associated system preferences
function as expected
6 - Verify the AutoSelfCheck user is logged out if they attempt to visit
another page
Followed test plan.
If I go to http://YOURCATALOG/cgi-bin/koha/sco/sco-main.pl, CSS and JS trigger already on
the login form, I suppose that is intended.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Brendan Gallagher <bredan@bywatersolutions.com>
The default patron search types has changed from 'contain' to
start_with. Users consider it as a bug.
This patch revert the previous changes to default on 'contain'.
Test plan:
Search for patrons in different places (guarantor, checkout, patron
module, acquisition module, etc.) and confirm that the default is always
'contain'
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
Signed-off-by: Brendan Gallagher <bredan@bywatersolutions.com>
GetLoanLength arbitrary defaulted to 21. The expected behavior seems to
be to default on 0 (loan will be dued today).
IMPORTANT NOTE: This patch will introduce a change in the behaviors for
configuration with a 0 in issuelength. Before this patch, the rule with
a issuelength==0 was skipped, now it's used!
Test plan:
1/ Do not define any rule: the due date will be today (before this patch
was +21 days)
2/ Define some rules which does not match the patron category, itemtype
or branchcode: the due date will be today (before this patch was +21
days).
3/ Modify a rule to match the checkout and set issuelength=0: the due
date will be today (before this patch, the rule was skipped)
4/ Modify this rule and set the issuelength to something > 0: the due
date will be adjusted (same behavior as before this patch)
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Works ok, checked 1-4
All test pass
No koha-qa errors
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
The login page should not be displayed if the page is displayed in a
frame.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Brendan Gallagher <bredan@bywatersolutions.com>
Added the following indexes:
Interest-age-level | 591$a ind1=1
Interest-grade-level | 591$a ind1=2
lexile-number | 591$a ind1=8
Reading-grade-level | 591$a ind1=0
Moved 'lex' from a zebra index to a ccl alias to lexile-number.
Changed the handling of st-numeric in C4/Search.pm to allow for search ranges.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works as advertised
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
This patch alters the MySQL query to remove a max statement which
incorrectly groups full annual barcodes with numeric values.
Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
From C4::Koha::GetAuthorisedValues
# TODO: the "selected" feature should be replaced by a utility function
# somewhere else, it doesn't belong in here. For starters it makes
# caching much more complicated. Or just let the UI logic handle it, it's
# what it's for.
Indeed, it's not a job for a subroutine, the template should take care of that.
Note that a perf gain could be won with this patch \o/
Test plan:
- Edit an itemtype and check the value of the "Search category" dropdown list
- Edit a patron attribute type and check the value of the "Class" dropdown list
- Detail for a catalogue record, the Status column should be correctly
populated if items are damaged and/or lost
- Item details for a catalogue record, the lost, damaged and withdrawn
value should be correctly displayed
- Edit a patron, the "street type" should be correctly selected
- Create a patron attribute type linked to an authorised value list.
- Edit a patron, set a value for this attribute, edit it again. The
correct value should be selected.
- Search for subscriptions. The 'Location' dropdown list should behave
correctly (select the entry you have choosen before, etc.)
- Edit a subscription, the location dropdown list should select the
correct value.
- Edit and view a suggestion with a 'reason for suggestion' set (you
should have at least 1 OPAC_SUG AV defined)
Followed test plan, works as expected
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
subroutines should not take $dbh in parameter.
C4::Biblio::TransformMarcToKoha has it and does not use it.
Test plan:
Look at the patch and confirm that all occurrences of
TransformMarcToKoha have been modified.
Signed-off-by: Jacek Ablewicz <abl@biblos.pk.edu.pl>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Right now, ->dbh calls are actually quite expensive (they involve
DB connection health checks, each and every time). Some speed-sensitive
subroutines inside C4/Biblio.pm (GetMarcStructure, GetAuthorisedValueDesc)
have this statement
my $dbh = C4::Context->dbh;
on top of the code, but they don't always/don't usually need DB
handle - not at that stage at least. This trivial patch eliminates
unneeded ->dbh calls in those subroutines. With it, average
GetMarcStructure() running time goes down from 14 miliseconds
to 9 miliseconds (on top of Bug 16166), it also makes catalogue
search profiling a bit easier.
Test plan:
1) apply patch
2) ensure that catalogue searches are still working
3) run t/*Biblio* tests
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
This subroutine always returns what has been sent in parameter.
It is unecessary and can be removed.
Test plan:
prove t/Ris.t
should not be noisy
Export a catalogue record in Ris should generate the same file with and
without this patch
NOTE: With/Without were identical in my testing.
t/Ris.t is nicely silenced.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
TEST PLAN
---------
1) prove t/Ris.t
-- very noisy
2) apply patch
3) prove t/Ris.t
-- just one confusing noise.
4) run koha qa test tools
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Add support for processing incoming Edifact Quotes, Invoices
and order responses and generating and transmission of
Edifact Orders.
Basic workflow is that an incoming quote generates an aquisition
basket in Koha, with each line corresponding to an order record
The user can then generate an edifact order from this (or another)
basket, which is transferred to the vendor's site
The supplier generates an invoice on despatch and this will
result in corresponding invoices being generated in Koha
The orderlines on the invoice are receipted automatically.
We also support order response messages. This may include
simple order acknowledgements, supplier reports/amendments
on availability. Cancellation messages cause the koha order
to be cancelled, other messages are recorded against the order
Which messages are to be supported/processed is specifiable on a
vendor by vendor basis via the admin screens
You can also specify auto order i.e. to generate orders from quotes
without user intervention - This reflects existing
workflows where most work is done on the suppliers website
then generating a dummy quote
Received messages are stored in the edifact_messages table
and the original can be viewed via the online
Database changes are in installer/data/mysql/atomicchanges/edifact.sql
Note new perl dependencies:
Net::SFTP:Foreign
Text::Unidecode
Signed-off-by: Paul Johnson <p.johnson@staffs.ac.uk>
Signed-off-by: Sally Healey <sally.healey@cheshiresharedservices.gov.uk>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Rename not_borrowered_since to not_borrowed_since
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
This patch adds the ability to select a patron list for deletetion
when using the Batch patron deletion/anonymization tool. It also adds
buttons to the the patron lists table to access both the batch deletion
and batch modification directly from the lists view.
This is a squash of previous patches but now adds a patron_list_id
parameter to C4::Members::GetBorrowersToExpunge and uses that routine to
fetch patrons from a list.
Test Plan:
1) Apply this patch
2) Create a list of patrons with the new Patron Lists feature
3) Try using the batch edit link form the lists table
4) Try using the batch delete link from the lists table
5) Verify previous functionality has not changed
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Patron batches are correctly passed to the edit and delete pages.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Test Plan (remains the same):
0) Back up your database
1) Apply all these patches
2) In your mysql client use your Koha database and execute:
> DELETE FROM systempreferences;
> SOURCE ~/kohaclone/installer/data/mysql/sysprefs.sql;
-- Should be no errors.
> SELECT * FROM systempreferences LIKE 'GoogleO%';
-- Should see 4 entries.
> QUIT;
3) Restore your database
4) Run ./installer/data/mysql/updatedatabase.pl;
5) In your mysql client use your Koha database and execute:
> SELECT * FROM systempreferences LIKE 'GoogleO%';
-- Should see the same 4 entries.
6) Log into the staff client
7) Home -> Koha administration -> Global system preferences
8) -> OPAC
-- make sure your OPACBaseURL is set (e.g. https://opac.koha.ca)
9) -> Administration
-- There should be a 'Google OAuth2' section with the ability
to set those 4 system preferences.
10) In a new tab, go to https://console.developers.google.com/project
11) Click 'Create Project'
12) Type in a project name that won't freak users out, like your
library name (e.g. South Pole Library).
13) Click the 'Create' button.
14) Click the 'APIs & auth' in the left frame.
15) Click 'Credentials'
16) Click 'Create new Client ID'
17) Select 'Web application' and click 'Configure consent screen'.
18) Select the Email Address.
19) Put it a meaningful string into the Product Name
(e.g. South Pole Library Authentication)
20) Fill in the other fields as desired (or not)
21) Click 'Save'
22) Change the 'AUTHORIZED JAVASCRIPT ORIGINS' to your OPACBaseURL.
(http://library.yourDNS.org)
23) Change the 'AUTHORIZED REDIRECT URIS' to point to the new
googleoauth2 script
(http://library.yourDNS.org/cgi-bin/koha/svc/auth/googleopenidconnect)
24) Click 'Create Client ID'
25) Copy and paste the 'CLIENT ID' into the GoogleOAuth2ClientID
system preference.
26) Copy and paste the 'CLIENT SECRET' into the GoogleOAuth2ClientSecret
system preference.
27) Change the GoogleOpenIDConnect preference to 'Use'.
28) Click 'Save all Administration preferences'
29) In the OPAC, click 'Log in to your account'.
-- You should get a confirmation request, if you are
already logged in, OR a login screen if you are not.
-- You need to have the primary email address set to one
authenticated by Google in order to log in.
30) Run koha qa test tools
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
To test
1/ Apply both patches
2/ This patch lets you easily configure mappings for categorycode values.
These mapping will be used when updating the user's account after a successful LDAP login.
Here is an example configuration :
<config>
<ldapserver id="ldapserver>
<mapping>
<categorycode is="usertype">STU</categorycode>
...
</mapping>
<categorycode_mapping>
<categorycode value="STU">STUDENT</categorycode>
<categorycode value="EMP">EMPLOYEE</categorycode>
</categorycode_mapping>
</ldapserver>
</config>
3/ With this configuration, LDAP users with the usertype value "EMP" on the LDAP server should have the "EMPLOYEE" categorycode in Koha.
Signed-off-by: Chris <chris@bigballofwax.co.nz>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
To test
1/ Apply both patches
2/ This patch lets you easily configure mappings for categorycode values.
These mapping will be used when updating the user's account after a successful LDAP login.
Here is an example configuration :
<config>
<ldapserver id="ldapserver>
<mapping>
<categorycode is="usertype">STU</categorycode>
...
</mapping>
<categorycode_mapping>
<categorycode value="STU">STUDENT</categorycode>
<categorycode value="EMP">EMPLOYEE</categorycode>
</categorycode_mapping>
</ldapserver>
</config>
3/ With this configuration, LDAP users with the usertype value "EMP" on the LDAP server should have the "EMPLOYEE" categorycode in Koha.
Signed-off-by: Chris <chris@bigballofwax.co.nz>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
These prefs do not need to be cached, a quick access to $ENV permit to
get the value.
Signed-off-by: Jacek Ablewicz <abl@biblos.pk.edu.pl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Olli-Antti Kivilahti <olli-antti.kivilahti@jns.fi>
Also fixes ! and +
Rebased to master
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
It makes perfect sense and works as expected. This part of the code is too
under-tested so no point requiring a regression test for such a simple change.
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
This failure has been introduced by
commit 243b797dd1
Bug 15285: Update common files
This is because the cannot_be_modified key is not always created by
C4::Utils::DataTables::ColumnsSettings subroutines
Test plan:
prove t/db_dependent/ColumnsSettings.t
should return green
And you can also test a table where the feature is set and a column
cannot be modified from the admin page.
NOTE: Works as described. I was pondering this potential
solution when I found it in bugzilla.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
This patch fixes a regression introduced by
commit 7e70202d34
Bug 15381: Remove GetAuthType and GetAuthTypeCode
This first version will reintroduce the same behavior as before bug
15381: the record will be displayed even if it's no in the DB
Test plan:
Search for authorities
delete one
The zebra's index is not updated yet and the results will contain the
record you have deleted.
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
This patch makes the PayPal integration feature independent from the
URL::Encode library, which is absent in some supported distributions.
It uses the URI package which is already a Koha dependency.
To test:
- Apply the patch
- Notice there are no deps for URL::Encode
- Follow the steps from the original patch
=> SUCCESS: It works as expected
- Sign-off :-D
Note: I deleted the line in which $amount_to_pay was url-encoded, because that's
one of the things query_form does (and the variable is only used as a parameter to it).
Sponsored-by: ByWater Solutions
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Test plan:
- Update your configuration file to use LDAP authentication and enable update
(<update>1</update>) option,
- login with an existing user with extended attrbitutes that are not in
LDAP mapping,
- check that all attributes are still here.
Signed-off-by: Chris <chrisc@catalyst.net.nz>
Signed-off-by: Philippe Blouin <philippe.blouin@inlibro.com>
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
This patch adds the ability to query the extended patron
attributes via the ILSDI web service's GetPatronInfo service.
Example: ilsdi.pl?service=GetPatronInfo&patron_id=3&show_attributes=1
A new element <attributes> will be added if there
are any attributes available from the database.
We need to discuss the security implications of showing the
attributes. At present it will allow querying of non-public
(OPAC-visible) information. We might want to change this.
Sponsored-By: Halland County Library
Test plan:
* Configure Koha to make use of extended attributes:
Under 'Administration' -> 'Global system preferences' ->
'Patrons' tab -> Set 'ExtendedPatronAttributes' to 'Enable',
press save and switch to 'Web services' tab.
* Enable the ILS-DI service:
Under 'Administration' -> 'Global system preferences' ->
'Web services' tab -> 'ILS-DI' section:
Set 'ILS-DI' to 'Enable' and save.
* Create an attribute to query:
Under 'Administration' -> 'Patrons and circulation' ->
'Patron attribute types' press 'New patron attribute type':
Enter a type code, like 'DOORCODE', description and assign
a category that your test patron is a member of, then save.
* Set value for test user:
Locate the test patron, the new attribute should be listed
under 'Additional attributes and identifiers'.
Click 'Edit' and assign a value, like '1337' and save.
* Query the ILS-DI service:
http://127.0.1.1/cgi-bin/koha/ilsdi.pl?service=GetPatronInfo&patron_id=1&show_attributes=1
The output XML should have an element named 'attributes'
containing the data you entered.
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Koha's SIP2 server should have support for the AV field ( field items ).
The biggest problem with this field is that its' contents are not really
defined in SIP2 protocol specification. All it says is "this field
should be sent for each fine item". Due to this, I think the contents of
the field need to be configurable at the login level, so that the
contents can be defined based on the SIP2 devices requirements for the
AV field.
Test Plan:
1) Apply this patch
2) Find a patron with outstanding fines
3) Run a patron information request using misc/sip_cli_emulator.pl using the new -s option with the value " Y "
4) Note there is an AV field for each fee containing the description and amount
5) Edit your sip config, add an av_field_template parameter to the login you are using such as
av_field_template="TEST [% accountline.description %] [% accountline.amountoutstanding | format('%.2f') %]"
6) Restart your SIP server
7) Repeat the patron information request
8) Note your custom AV field is being used!
Signed-off-by: Chris Davis <cgdavis@uintah.utah.gov>
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
The items.new column is badly named, the Koha::Item->new accessor will
never returns this value, but the constructor will be called instead.
This patch renames it with new_status to avoid the ambiguity.
Test plan:
0/ Do not apply this patch
1/ Define some rules in the "Automatic item modifications by age" tool
with at least one items.new field used
2/ Apply this patch
3/ Execute the update DB entry
4/ Reload the tool page and confirm that the changes have been taken
into account
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
$VERSION reintroduced into External/BakerTaylor.pm but was
not declared. Causes tests to fail.
Readd VERSION to the package vars
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
These files should be managed on their own bug reports.
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
perl -p -i -e 's/use vars qw\(\s*\);\n//' **/*.pm
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
perl -p -i -e 's/^.*set the version for version checking.*\n//' **/*.pm
+ manual adjustements
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Mainly a
perl -p -i -e 's/^.*3.07.00.049.*\n//' **/*.pm
Then some adjustements
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
perl -p -i -e 's/^(use vars .*)\$VERSION\s?(.*)/$1$2/' **/*.pm
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
C4::Members::GetMemberAccountRecords wrongly casts float to integer
It's common to use sprintf in Perl to do this job.
% perl -e 'print int(1000*64.60)."\n"';
64599
% perl -e 'print sprintf("%.0f", 1000*64.60)."\n"';
64600
Test plan:
1) Create manual invoice for 64.60 (or 1.14, 1.36, ...)
2) Try to pay it using "Pay amount" or "Pay selected" buttons
Signed-off-by: Sally Healey <sally.healey@cheshiresharedservices.gov.uk>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
On debian Jessie, the CGI version is >= 4.08
Since this version, the param method raise a warning
"CGI::param called in list context".
Indeed, it can cause vulnerability if called in list context
https://metacpan.org/pod/CGI#Fetching-the-value-or-values-of-a-single-named-parameterhttp://blog.gerv.net/2014/10/new-class-of-vulnerability-in-perl-web-applications/
There is a long journey to get rid of these warnings.
First I suggest to redefine the multi_param method when the CGI version
installed is < 4.08, it will allow us to move the wrong ->param calls to
->multi_param without waiting for everybody to upgrade.
The different ways to call these 2 methods are:
my $foo = $cgi->param('foo'); # OK
my @foo = $cgi->param('foo'); # NOK, will raise the warning
my @foo = $cgi->multi_param('foo'); #OK
$template->param( foo => $cgi->param('foo') ); # NOK, will raise the warning
# and vulnerable
$template->param( foo => scalar $cgi->param('foo') ); # OK
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Tested a call to multi_param with CGI < 4.08.
With reference to the comments on Bugzilla, this workaround is arguable,
but provides a base to move to multi_param. If we come up with a better
solution, it should be easy to adjust.
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
As promised, here is the long-awaited sequel to #8753.
What has changed :
- The Koha::Patron::Password::Reset is now used in place of C4::Passwordrecovery
- That ugly shift-grep contraption is no more (goodbye old friend)
- The generated unique key won't end in a dot anymore
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
The patron attributes displayed on editing a patron are not displayed if
limited to another library.
C4::Members::Attributes::SetBorrowerAttributes will now only delete attributes
the librarian is editing.
SetBorrowerAttributes takes a new $no_branch_limit parameter. If set,
the branch limitations have not effect and all attributes are deleted
(same behavior as before this patch).
Test plan:
1/ Create 2 patron attributes, without branch limitations.
2/ Edit a patron and set a value for these attributes
3/ Limit a patron attributes to a library (one you are not logged in
with).
4/ Edit again the patron.
=> You should not see the limited attributes
5/ Edit the patron attributes and remove the branch limitation
=> Without this patch, it has been removed from the database and is not
displayed anymore.
=> With this patch, you should see it.
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Accessing to the cache for each call to C4::Context->preference might
have an impact on performances.
To avoid that this patch introduces a L1 cache (simple hashref). It will
be populated by accessing the L2 cache (Koha::Cache).
If a pref is retrieved 10x, the first one will get the value from the L2
cache, then the L1 cache will be check.
To do so we will need to clear the L1 cache every time a page is loaded.
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Signed-off-by: Jacek Ablewicz <abl@biblos.pk.edu.pl>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Unless in t/db_dependent/Context.t where we want to test the cache
behaviors.
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Signed-off-by: Jacek Ablewicz <abl@biblos.pk.edu.pl>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
At the moment, the sysprefs are only cache in the thread memory
executing the processus
When using Plack, that means we need to clear the syspref cache on each
page.
To avoid that, we can use Koha::Cache to cache the sysprefs correctly.
A big part of the authorship of this patch goes to Robin Sheat.
Test plan:
1/ Add/Update/Delete local use prefs
2/ Update pref values and confirm that the changes are correctly taken
into account
Signed-off-by: Chris <chrisc@catalyst.net.nz>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Tested with plack with syspref cache enabled, there is some time between setting the syspref and applying it, but it takes just one reload of page, it shouldn't be problem, should it?
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Signed-off-by: Jacek Ablewicz <abl@biblos.pk.edu.pl>
Tested with CGI and CGI + memcache; some small issues still remain,
but it would be better to deal with them in separate bug reports
if necessary
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
There are some places where frames are used, the greybox JS plugin for
instance.
We need either to allow them from Koha or replace this plugin.
The easier for now is to switch the value from DENY with SAMEORIGIN.
Test plan:
- modify a record in a batch (tools/batch_record_modification.pl)
- click on preview marc
=> With only the previous patch you will get a blank page.
=> With this patch apply, it will work as expected.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Web pages that can be embedded in frames are vulnerable to cross-frame
scripting attacks. Cross-frame scripting is a type of phishing attack
that involves instructions to an unsuspecting user to follow a specific
link to update confidential information in an online application.
Because the link leads to a legitimate page from the online application
that is embedded in a frame hosted by the attackers' server, the
attackers can capture all the information that the user enters.
https://www.owasp.org/index.php/Clickjacking_Defense_Cheat_Sheet
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Note:
QA question: Does the Koha::Patron->siblings method should return undef
if there is no guarantor?
It would avoid the weird != undef, = $borrowernumber conditions.
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
2 subroutines of C4::Members deal with guarantor/guarantees:
GetGuarantees and GetMemberRelatives.
Since we already have a Koha::Patron->guarantor method, it makes sense
to move these 2 subroutines to this module.
This first patch deals with GetGuarantees.
Test plan for the entire patch set:
1/ Create 5 patrons A (adult), B (child), C (child), D (child), E
(child), F (adult)
2/ Add relation between them: A is father of B, C and D.
E does not have a guarantor
F does not have guarantees
3/ Check some items out for all of these patrons
4/ On the "Check out" and "Details" tabs, you should not see any
differences with these patch applied : The "Relatives' checkouts" tabs
should list all of the guarantor/guarantee/siblings checkouts
Note:
$template->param('C' => 1);
I have not found any reference of this 'C' in the template.
It seems it's an old c/p from members/memberentrygen.tt
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Looking at the code, there is some broken with the guarantees code.
It seems that the expected behavior would be to update address, fax,
B_city, mobile, city and phone info of the guarantees when a guarantor
is modified.
But the code in C4::Members::ModMember is broken:
668 my $borrowercategory= GetBorrowercategory(
$data{'category_type'} );
669 if ( exists $borrowercategory->{'category_type'} &&
$borrowercategory->{'category_type'} eq ('A' || 'S') ) {
670 # is adult check guarantees;
671 UpdateGuarantees(%data);
672 }
First, GetBorrowerCategory expects a categorycode, not a category_type.
Then UpdateGuarantees retrieves the param like:
989 sub UpdateGuarantees {
990 my %data = shift;
Which means that %data will always be something like ( a_key => undef )
And nothing more.
The updateguarantees subroutine (It has been renamed) has been introduced by
commit 56825e415f
Date: Mon Aug 30 13:48:58 2004 +0000
modularizing (with Members.pm) members management
(beginning of...)
And the `%data = shift` already existed...
This code has never worked and could be removed.
See http://lists.koha-community.org/pipermail/koha-devel/2016-January/042241.html
Test plan:
Confirm the previous assertions.
Note that I have found this bug working on bug 15631, see patch "Bug
15631: Koha::Cities - remove getidcity and GetCities"
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
This patch will add indexes for Date/time-last-modified.
To test:
1. apply patch
2. reindex
3. search for dtlm:DATE and date-time-last-modified:DATE
4. confirm that you get results
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works as advertised
Signed-off-by: Frédéric Demians <f.demians@tamil.fr>
I confirm Hector signing-off. A simple Zebra server restart suffice to get
working the searches on date-time-last-modified and dtlm.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Now the sYstem tries to insert value of 205$a into 461$a when a child is
created from the father record. In UNIMARC 46x tags there is not
present a subfield for ediction value (205$a in UNIMARC).
To Test:
1) Check to have EasyAnalyticalRecords on 'off'
2) Check to use UNIMARC
3) Create a record with data in 200$a (title), 205$a (ediction), 700
(author) 215$a(Place), 215$d(date)
4) From those record create a child using 'New'->'New child record'
5) See the values in 461 tag: You can see that in 461$a there is the
value of 205$a from father This is wrong, you need to have the value
of 700 $a and $b from father record, and 205$a in 461$e.
6) Appy the patch
7) Redo 4-5
8) Now 461 is good
Signed-off-by: Frédéric Demians <f.demians@tamil.fr>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
I have not checked the doc but trusting author and signoffer.
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
This patch fixes a bug whereby GetMember(searchfield => undef)
(i.e., searching for patron records where 'searchfield' is NULL)
would crash.
This fixes a regression introduced by bug 15344 that in turn
exposed a long-standing bug in GetMember().
To test:
[1] Import some offline circulation transactions that include at
least one return.
[2] Attempt to view the list of pending transactions; a crash
will occur.
[3] Apply the patch and view the list of pending transactions again;
this time, it should work.
Signed-off-by: Galen Charlton <gmcharlt@gmail.com>
Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
This patch removes the code for inserting the <a> anchor tags around
URLs in GetMarcNotes (as added originally).
The URLs are placed in separate array elements; the template should take
care of further handling.
The unit test has been adjusted accordingly.
Test plan:
Run the unit test.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
This patch includes:
[1] Add some logic to GetMarcNotes to embed the contents of MARC21 field
555$u in a html anchor tag.
[2] Add a unit test for GetMarcNotes in Biblio.t
[3] Remove calls to GetMarcNotes from sendbasket.pl (opac and staff).
A closer look revealed that the data was not used; the notes in the
mail of sendbasket are taken from GetBiblioData.
Test plan:
[1] Edit a record. Add one or two URLS in 555$u. Add something in 500$a too.
[2] Check if you can click the URLs in opac and staff detail tab Notes or
Descriptions.
[3] Run the unit test t/db../Biblio.t
[4] Add something in the cart. Click More Details and send the cart.
Verify that you have something in Notes (from 500$a).
Signed-off-by: Marc Veron <veron@veron.ch>
Followed test plan. Works as expected. QA tools OK.
Tested with all patches together, works as expected
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
This patch allows for more flexibility for determining when the number
of holds a record has should trigger the reduction of the loan length
for items on that record.
This patch adds a new system preference decreaseLoanHighHoldsControl,
which defaults to 'static', the original behavior of the feature.
It also has a new behavior 'dynamic' which makes the feature only
decrease the loan length if the number of holds on the record exceeds
the number of holdable items + decreaseLoanHighHoldsValue.
It also allows items to be filtered from the list of items based
on the damaged, lost, not for loan, and withdrawn values even if
those values would have allowed holds ( i.e. values < 0 )
Test Plan:
1) Apply this patch
2) Run updatedatabase.pl
3) Set decreaseLoanHighHolds to Enable
4) Set decreaseLoanHighHoldsControl to "over the number of items on the record"
5) Set decreaseLoanHighHoldsDuration to 1
6) Set decreaseLoanHighHoldsValue to 3
7) Create a record with 5 items
8) Please 8 or more holds on the record
9) Check out one of the items to a patron
10) Note the loan length is reduced to 1 day
11) Set decreaseLoanHighHoldsValue to 3 to 2
12) Check out one of the items to a patron
13) Note the loan length is *not* reduced
14) Enbale all the filters possible in decreaseLoanHighHoldsIgnoreStatuses
15) Set one item to be damaged
16) Note the loan length is reduced
17) Unset the damaged status
18) Repeat steps 15 - 17 for lost, not for loan, and withdrawn
Signed-off-by: Christopher Brannon <cbrannon@cdalibrary.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
The commit b5ecefd485
Date: Mon Feb 3 18:46:00 2003 +0000
had a funny description:
Added function to check if a MARC subfield name is "koha-internal"
(instead of checking it for 'lib' and 'tag' everywhere); temporarily
added to Koha.pm
"Temporarily", since 2003, everything is relative, isn't it? :)
The thing is that GetMarcStructure returns hash like
field_200 => {
subfield_a => {
%attributes_of_subfield_a
},
%attributes_of_field_200
}
The attributes for field_200 can be 'repeatable', 'mandatory', 'tag', 'lib'.
We don't want to loop on these values when looping on subfields.
Since there are just { k => v } with v is a scalar (string), it's easier
to test if we are processing a subfield testing the reference.
At some places, we don't need to test that, we are looping on values
from MARC::Field->subfields which are always valid subfields.
Test plan:
1/ Edit items using the batch item mod tool
2/ display and edit items via the cataloguing module.
You should not see any changes between before and after the patch
applied.
Tech notes:
We need to check what we are processing when we loop on 'subfields' from
GetMarcStructure, not from MARC::Field->subfields.
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
When you are ready, you still see that small detail.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Conform QA comment, Patron Info request is slightly adjusted to be
consistent with changes to Patron Status request.
If the cardnumber is ok and the password is wrong, BL=N is reported but
also add 'Invalid password' in AF.
Additionally, an invalid card number is reported in AF.
Test plan:
[1] Send patron info request for invalid card.
[2] Idem for valid card, no password.
[3] Idem for valid card, good password.
[4] Idem for valid card, wrong password.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Verified by telnetting SIP server.
And tested additionally with the new unit test of bug 15956.
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Conform QA comment on Bugzilla, we do this:
[1] Attribute for overdrive mode/invalid credentials is not really needed.
We can always pass a screen message that card or password is invalid.
[2] If the cardnumber is correct and the password is wrong, we should
still honour the request. The bad password is recognized by BLN and
an additional message in AF.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Verified by telnetting SIP server.
And tested additionally with the new unit test of bug 15956.
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
NOTE: apply this patch after the additional perltidy patch
this patch is basically a small work-around to fix some confusing login text,
when users enter incorrect auth details via Overdrive's website
with this option disabled (default) there is no change to SIP's behaviour
to test...
1/ configure your overdrive account to talk to your Koha's SIP service
2/ start Koha's SIP
3/ enter a correct username and correct password in overdrive
see overdrive display '(1) Greetings from Koha' (good)
4/ enter a correct username and *incorrect* password in overdrive
see overdrive display '(1) Greetings from Koha' (bad)
5/ enter an incorrect username in overdrive
see overdrive display '(1)' (badder)
6/ apply patch, enable 'overdrive-mode' in Koha's SIPConfig.xml
example...
---------------------
<accounts>
<login id="kohasip" password="xxxxx" delimiter="|"
error-detect="enabled" institution="YYY" overdrive-mode="1" />
</accounts>
---------------------
7/ restart SIP
8/ enter a correct username and correct password
see overdrive display '(1) Greetings from Koha'
9/ enter a correct username and *incorrect* password
see overdrive display '(1) Invalid patron or patron password'
10/ enter an incorrect username and incorrect password
see overdrive display '(1) Invalid patron or patron password'
http://bugs.koha-community.org/show_bug.cgi?id=1387
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
The original perltidy patch from Mason has been amended.
The perltidy itself has been moved to a separate patch with the current
perltidyrc applied.
As noted on Bugzilla, the original perltidy patch included some extra
changes:
[1] You prefix timestamp with Sip
This is not actually needed (it is imported), but if we should prefix it,
we should prefix now with C4::SIP::Sip. But you only changed two
occurrences (out of 26). So I remove these two changes.
[2] You remove the $server parameter from two calls of maybe_add:
A closer look at the remaining code tells me that $server is always
passed to maybe_add for FID_SCREEN_MSG. So this only left me the
current whitespace change.
But at least we documented what we did or did not, and why..
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Run perltidy pro=xt/perltidyrc on the file.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
From C4::Templates::output
# add variables set via param to $vars for processing
for my $k ( keys %{ $self->{VARS} } ) {
$vars->{$k} = $self->{VARS}->{$k};
}
This loop is not necessary, we could do the same with
$vars = { %$vars, %{ $self->{VARS} } };
After a quick benchmark, it gains 100 microseconds when we pass 170 vars
to the template.
Test plan:
Do some clicks on the interface, everything should be ok.
Signed-off-by: Frédéric Demians <f.demians@tamil.fr>
Perl idiosyncratic way of merging hash, clearer, if not quicker (not
verified)
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
To retrieve a patron image, we can call Koha::Patron::Images->find or
Koha::Patrons->find->image
Both will return a Koha::Patron::Image object.
Test plan:
1/ From the patron/member module, open all tabs on the left (Checkouts,
detail, fines, etc.)
The image should be correctly displayed.
2/ At the OPAC, on the patron details page (opac-memberentry.pl) the
image should be displayed as well.
3/ Same on the sco module.
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
The C4::Members::RmPatronImage just removed a row in patronimage.
This can be accomplished using the delete method of Koha::Patron::Image.
Test plan:
From the patron defail page, try to delete the image of a patron.
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
The C4::Members::PutPatronImage inserted/updated the image of a patron.
This can be done easily with ->find->set->store or ->new->store
Test plan:
1/ Modify the image of a patron from the patron detail page
2/ Add an image to a new patron
3/ Use the "Upload patron images" tools (tools/picture-upload.pl) to add
or modify the image of a patron
4/ Use the "Upload patron images" tools (tools/picture-upload.pl) to add
or modify the image of several patrons, using a zip file.
Stress the script trying to get as many errors as possible (wrong
cardnumber, wrong mimetype, file does not exist, etc.)
With this patch, if the cardnumber does not exist, you will get a
specific error "Image not imported because this patron does not exist in
the database"
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch sorts the modification templates when getting them from the
database This affects the pages below:
tools/batch_record_modification.pl
tools/marc_modification.pl
tools/stage-marc-import.pl
To test:
1 - Add some marc modification templates in a non alpha order (Shoes,
Hats, Cats)
2 - visit the pages above and note the templates are in order
added
3 - apply patch
4 - visit the three pages and note correct order
5 - verify all tools continue to work as expected
Signed-off-by: Frédéric Demians <f.demians@tamil.fr>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
The 'borrower' should not be used anymore, especially for new code.
This patch move files and rename variables newly pushed (i.e. in the Koha
namespace).
Test plan:
1/
git grep Koha::Borrower
should not return code in use.
2/
Prove the different modified test files
3/ Do some clicks in the member^Wpatron module to be sure there is not
an obvious error.
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works as described. Tested with Circulation, Members/Patrons, Discharge,
Restrictions modules and the must common functionalities
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
This subroutine just retrieved the messages given some parameters.
Some job should not have been done in this subroutine.
It was called only 3 times, in circ/circulation.pl and opac-user.pl.
Basically it was used to retrieved the message to displaye for a given
patron ($borrowernumber) at the OPAC (B) or Staff (L).
For the 3 calls, the 2 parameters $borrowernumber and $type
(message_type) were passed, the "%" trick at the beginning of the
subroutine was useless.
Moreover, the date formatting should be done on the TT side, not in
subroutine.
The can_delete flag was set if the branchcode given in parameter was the
same as the one of the message. This has been delegated to the template.
Indeed the can_delete was not valid, since it must depend on the
AllowAllMessageDeletion pref.
The test is now:
IF message.branchcode == branch OR
Koha.Preference('AllowAllMessageDeletion'')
There is not specific test plan for this patch, the changes have already
been tested in previous patches.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
The GetMessageCount subroutine was only used once, in opac-user.pl, to
know if some messages will be displayed.
Test plan:
1/ Create messages to display at the OPAC for a patron
2/ Logged this patron in at the OPAC, you should see the messages
displayed.
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
The DeleteMessage just deleted and logged if needed.
This is now be done by Koha::Patron::Message->delete.
Test plan:
1/ Go on the "check out" page of a patron
2/ Delete some messages
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
The AddMessage subroutine just
1. checked if all the parameters were passed
2. inserted the message in the DB
3. logged the action if needed
These 3 jobs are now done by the overloaded store method of
Koha::Patron::Message.
Test plan:
1/ Go on the "check out" page of a patron
2/ Add different new messages
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
This subroutine is unused and can be removed.
There is no trace left of currency in C4::Budgets.
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Most part of the code here is unnecessary complex. We should selected
the currency if it is selected, that's all :)
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Bug 12803 [QA Followup] - Remove use of C4::Dates
C4::Dates was being included, but not used in the code!
Bug 12803 [QA Followup] - Fix koha-qa.pl errors
Bug 12803 [QA Followup] - Update unit tests due to changes in master
Bug 12803 [QA Followup] - Fix to stop failing unit tests
Bug 12803 [QA Followup] - Remove duplicate 'use' lines
Bug 12803 [QA Followup] - Remove NO_CACHE
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
The holds queue is typically generated many times a day in order to
select items to fill holds. Often these items are to be sent to a
different library. However, if the library whose item is picked to fill
a hold is closed, that hold will remain unfilled even if there are other
open libraries who own that item. It would be helpful if we could skip
closed libraries for the purpose of selecting items to fill holds.
Test Plan:
1) Apply this patch
2) Run updatedatabase.pl
3) Create a record with two items on it, one at Branch A, and one at
Branch B
4) Place a hold for pickup at Branch C
5) Generate the holds queue
6) Note which branch's item is selected for the hold
7) Enable the new system preference HoldsQueueSkipClosed
8) Add today as a holiday for that branch noted in step 6
9) Regenerate the holds queue
10) View the holds queue, notice the item selected is not from
the closed branch!
11) prove t/db_dependent/HoldsQueue.t
Signed-off by: Jason Robb <jrobb@sekls.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
When resending an email from the Notices tab in Patrons, we would like
to use the recent email address.
Test plan:
[1] Look up a patron with some notices sent.
[2] Adjust the patron email address (watch AutoEmailPrimaryAddress).
[3] Resend the notice. Verify if the new address was used.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
This patch allows to resend both sent and failed messages.
With messages in 'sent' status, we have to be careful not to accidentally send
sent messages again. With the previous patch using GET request, this was likely
to happen because of browser storing the GET parameters.
This patch changes request method from GET to POST. Instead of a simple link,
we now have a form element.
In notices.pl we redirect back to notices.pl, because with POST there is a risk
of resending the message accidentally by form resubmission at refresh.
To test, find/create a Patron that has sent or failed notices in message_queue:
1. Enable EnchancedMessagingPreferences system preference
2. Go to Patrons -> Notices
3. In the Notice column, click the title of the sent or failed message
4. Observe that there is nothing for resending the sent or failed message
5. Apply the patches.
6. Reload Notices page and repeat step 3
7. Observe that there is now a link "Resend" in the Status-column
8. Click Resend
9. Observe that the message gets into 'pending' status
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
The C4::Letters module does not have a GetMessage subroutine, which
could be quite useful.
This patch adds it and simplifies the code added by the previous patch.
It also adds a few tests and fixes POD typos.
Note that ResendNotice only resends failed messages. This will avoid to
resend already sent messages (using an url from the browser history for
instance).
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
This patch adds a link 'Resend' under a notice in 'failed' status
in the Patron's Notices tab.
By clicking the link, we will request notices.pl with parameter
"resendnotice=XXXXX" where XXXXX is message_id. In notices.pl,
we then check whether the given message is actually in 'failed'
status. If so, we use the C4::Letters::ResendMessage(123) to
change the status of the message into 'pending'. This way it
will be processed again by the cronjob process_message_queue.pl.
To test, find/create a Patron that has failed notices in message_queue:
1. Enable EnchancedMessagingPreferences system preference
2. Go to Patrons -> Notices
3. In the Notice column, click the title of the failed message
4. Observe that there is nothing for resending the failed message
5. Apply patch.
6. Reload Notices page and repeat step 3
7. Observe that there is now a link "Resend" in the Status-column
8. Click Resend
9. Observe that the message gets into 'pending' status
Works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
This patch fixes the problem of missing WWW::YouTube::Download breaking
record detail views. Instead of a general 'use', the module is only
required if the related syspref is enabled.
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
This patch adds:
- a new DB field items.new.
- a new page to configure this new status
(tools/toggle_new_status.pl).
- a new cronjob script (misc/cronjobs/automatic_item_modification_by_age.pl
was misc/cronjob/toggle_new_status.pl)
Why this status is useful for some libraries ?
The use cases are:
- to know easily what are the new items (with a simple sql query).
- to display an icon in the search results.
- issuing rules can be adapt for new items. Automatically (using the
cronjob script), the status change (depending the configuration) and
the item can be issued, for example.
- a RSS/Atom feeds can be created on these new items.
Test plan:
- log in with a librarian having the tools > items_batchmod permission.
- navigate to Home > Tools > Automatic item modifications by age (was: Toggle new status)
- click on the edit button
- there are 3 "blocks":
* duration: the duration during an item is considered as new.
* conditions: the status will change only if the conditions are meet.
* substitutions: if there is no substitution, no action will be done.
You can add some change to apply to the matching items.
E.g. ccode=3
new=''
If the value is an empty string (in other words, the input does not
contain anything), the field will be deleted.
You can create as many rules as you want.
- test the interface : add/remove rule, conditions, substitutions,
submit the form, edit, etc.
(There is a looot of JS everywhere, so certainly a looot of bugs...).
- when you have your rules defined, you can now launch the cronjob
script without any parameter.
A report will be displayed with the matching itemnumber and the
substitutions to apply. Verify results are consistent.
- launch the script with the -c argument and verify values have been
modified depending the substitution rules.
Signed-off-by: juliette et remy <juliette.levast@iepg.fr>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 11023: Add the ability to specify fields from biblioitems table.
Test plan:
Same as before but try with fields from the biblioitems table.
Signed-off-by: juliette et remy <juliette.levast@iepg.fr>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 11023: Add UT for C4::Items::ToggleNewStatus
Test plan:
prove t/db_dependent/Items/ToggleNewStatus.t
Signed-off-by: juliette et remy <juliette.levast@iepg.fr>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 11023: FIX - condition on biblioitems table does not work
If a rule contains a condition on the biblioitems table, the match won't
work. This patch fixes this issue.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 11023: Use DBIx-Class to retrieve column names
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 11023: Don't use the biblioitems fields for the subtitution
It's dangerous to allow a change on the biblioitems fields with this
feature.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 11023: Rename the duration parameter with 'age'
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 11023: The age parameter should be a number
The template should check if the age parameter is correctly filled
(should be a number).
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 11023: Change the name of the feature
Originaly this feature only permits to update the "new" field.
Now all item fields can be updated.
The name of the feature is now "Automatic item modifications by age".
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 11023 [QA Followup]
* Update DB version
* Fix capitalization error
* Rename misc/cronjobs/toggle_new_status.pl to misc/cronjobs/automatic_item_modification_by_age.pl
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 11023 [QA Followup] - Complete the renaming of "toggle new status" to "automatic item modification by age"
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Test plan:
1. Open OPAC self-registration page while logged out.
2. Note that cardnumber and categorycode are not shown.
3. Remove cardnumber and categorycode from
PatronSelfRegistrationBorrowerUnwantedField.
4. Enable autoMemberNum.
5. Reload self-registration page, note that categorycode now shows.
6. Disable autoMemberNum.
7. Reload self-registration page, note that cardnumber now shows.
8. Try saving a patron with an existing cardnumber; this should fail
and explain why.
9. Set CardnumberLength, and verify that those length restrictions are
enforced.
10. Verify that patron can be created with custom categorycode and
cardnumber.
Signed-off-by: Michael Sauers <msauers@dospace.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Koha::Logger allows us to split up logging to separate files based on
the interface. However, right now the interface is limited to just
'opac' or 'intranet'.
We should extend this to allow the interface to also be set to 'sip'
for SIP server logging, and to 'commandline' for cronjobs and all other
command line scripts.
Signed-off-by: Chris <chris@bigballofwax.co.nz>
Does what it says on the tin
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
C4::Koha::IsAuthorisedValueCategory contains only 2 useful calls, from
C4::Reports::Guided and reports/guided_reports.pl
It can be replaced with
Koha::AuthorisedValues->search({ category => $authorised_value})->count
Test plan:
1/ Create a sql report using an authorised value category, something
like:
SELECT COUNT(*) FROM items where itemlost=<<lost|LOST>>
2/ Execute the report and confirm that everything works fine.
3/ Create a sql report using a nonexistent authorised value categor,
something like:
SELECT COUNT(*) FROM items where itemlost=<<lost|NONEXIST>>
4/ When saving the report, you should get a warning message
"lost: The authorized value category (NONEXIST) you selected does not exist."
5/ Save anyway and execute the report, you should get the same warning
message.
QA:
git grep IsAuthorisedValueCategory
should not return any results
prove t/db_dependent/ReportsGuided.t
should return green
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works as described
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Right now, fines are updated based on the fine description. There are a
number of areas where this can go wrong ( date or time format changing,
title being modified, etc ). Now that issues has a unique
identifier, we should use that for selection and updating of fines.
Test Plan:
1) Apply this patch
2) Test creating and updating fines via fines.pl
and checking in overdue items. No changes should be noted.
3) prove t/db_dependent/Circulation.t
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
When accessing the modification logs from a link that does not
explicitly set the to and from dates (e.g., from patron or bib details),
no results are displayed unless the object had an action occur during
the current day.
This is a side-effect of commit 5dceb851 for bug 13813.
Test plan:
- View the modification logs of a record which has already been modified
(/tools/viewlog.pl?do_it=1&modules=CATALOGUING&action=MODIFY&object=XXX)
=> Without this patch, you won't see any logs (unless you have modified
the record today)
=> With this patch, the behavior is the same as prior bug 13813 (you can
check in 3.20.x), you will see all logs
Signed-off-by: Galen Charlton <gmcharlt@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
When importing patrons with a csv file which does not contain the privacy_guarantor_checkouts column in the header, you will get
DBIx::Class::Storage::DBI::_dbh_execute(): Column 'privacy_guarantor_checkouts' cannot be null at /home/koha/src/C4/Members.pm line 768
The same issue seems to occur for sms_provider_id.
Test Plan:
1) Attempt to import patron csv file with no privacy_guarantor_checkouts column
2) Note the error
3) Apply this patch
4) Repeat step 1
5) The error should no longer occur
NOTE: While this patch does work, should it be solved only
at this level? The issue that there is the lack of those two
fields on the tools screen still exists.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Add optional embedding of YouTube videos via HTML5Media.
New syspref: HTML5MediaYouTube: Embed/Don't embed videos.
Format WEBM is hardcoded as it is the only format accepted by all
modern browsers.
Test plan:
- apply patch
- catalogue a YouTube link in 856$u
- turn on HTML5MediaEnabled and HTML5MediaYouTube
- open the record in OPAC and staff client, check that the
'Play media' tab is showing and playing the video works.
Possible enhancements for followups:
- check available formats, offer quality choice
- accept official YT URL shortener
Signed-off-by: Aleisha <aleishaamohia@hotmail.com>
Works perfectly!
Signed-off-by: Nicole C Engard <nengard@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
It has been decided that Moose should not be a dependency for Koha, and
that this patch set should be reverted to avoid it's use.
This reverts commit 43bcc1c42c.
This reverts commit e5f4a0e3d5.
This reverts commit 6d44b0a91a.
This patch updates the calculation of 'No renewal before' to include the
new syspref NoRenewalBeforePrecision.
To test:
1) Check out an hour-based loan with 'No renewal before' set to 1.
Switch syspref NoRenewalBeforePrecision between 'date' and 'exact
time'. Confirm that with both settings the item cannot be renewed
until exactly one hour before due.
2) Check out a day-based loan with 'No renewal before' set to 1 day.
Confirm that:
* with NoRenewalBeforePrecision set to 'date', renewal is possible
at 12:00 AM on the day before due.
* with NoRenewalBeforePrecision set to 'exact time', renewal is
possible at 11:59 PM on the day before due.
Sponsored-by: Hochschule für Gesundheit (hsg), Germany
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
The singleBranchMode system preference does not make sense.
Either the install has only 1 library defined or several. In both case,
we can easily guess the behavior to follow.
So the idea of this patch is to replace the fetch of this syspref with a
call to count the number of libraries defined in DB.
Test plan:
1/ From a fresh Koha install, execute the DB entry to remove the pref.
2/ Define only 1 library
3/ Confirm that Koha behaves the same as before (try to change your
library, look at the facets)
4/ Create another library (or more) and reinsert the pref and set it:
insert into systempreferences (variable, value)
values('singleBranchMode', 1);
5/ Execute the DB entry
You should get a warning message.
6/ Repeat 3.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Does what it says, but will change behaviour for any Koha install that
has 2 branches defined, One circulation, and this preference set.
If that is an acceptable change, we might need to make sure this is noted well in the
release notes.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This subroutine is no longer is use and can be removed.
Test plan:
git grep displayServers
should not return any results.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch allows patrons to create thier own password during OPAC self
registration. It sets the password field to be hidden by default, and
allows for a system generated password if no password is supplied and
field is not mandatory
1 - Apply patch
2 - run updatedatabase.pl
3 - Check syspref "PatronSelfRegistrationBorrowerUnwantedField" - it
should contain 'password'
4 - Check self registration on opac - there should be no change
5 - Remove 'password' from PatronSelfRegistrationBorrowerUnwantedField
6 - Password field should now be visible in OPAC self registration
7 - Register a patron: If no passwor is supplied you should get a system
generated password
8 - Register a patron with a password, your password should be used
9 - Add 'password' to PatronSelfRegistrationBorrowerMnadatoryField
10 - Attempt to register a patron with no password - it should fail
11 - Try all combinations if mismatched/short/missing passwords and view
correct error messages
12 - prove t/db_dependent/Members.t
Sponsored by : Do Space (www.dospace.org)
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
* Use ->id instead of ->branchcode when possible to eliminate use of that nomenclature
* Fix bad use of ->branchcode to ->{branchcode} for unblessed hashref version of Koha::Library
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
C4::Branch::GetBranchInfo was only used once in opac/opac-suggestions.pl
The occurrence can easily be replaced by a call to Koha::Libraries->find
Test plan:
1/ Create a suggestion for library A
2/ Enable OPACViewOthersSuggestions
3/ Use a patron from library B to see the suggestions
4/ The "Suggested for" value should be correctly filled with the library
A name.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
This subroutine was only used in tests to add/update a library.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
C4::Branch::GetBranchDetail retrieved library infos, it could be easily
replaced with Koha::Libraries->find
When this change needs other big changes, the unblessed method is
called, to manipulate a hashref (as before) instead of a Koha::Library
object (for instance when $library is sent to GetPreparedLetter).
Test plan:
1/ Print a basket group, the library names should be correctly
displayed.
2/ Enable emailLibrarianWhenHoldIsPlaced and place a hold, a HOLDPLACED
notice will be generated (focus on the library name)
3/ Edit a patron and change his/her library
4/ Generate the advanced notices (misc/cronjobs/advance_notices.pl) and
have a look at the generated notices
5/ Same of overdues notices
6/ Set IndependentBranches and use a non superlibrarian user to place a
hold. The "pickup at" should be correctly filled.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
C4::Branch::GetBranchesInCategory is not used anymore and can be
removed.
Test plan:
git grep GetBranchesInCategory
should not return any result.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
C4::Members::getidcity and C4::Members::GetCities simply retrieved
cities info from the cities table.
The job done in members/memberentry.pl looked really weird and complicated.
Either I have missed something, or this patch can simplify it.
The expected behavior is:
1. Create a new patron => No city selected
2. Edit an existing patron => The borrowers.city value is selected
3. Add a guarantee => The borrowers.city of the guarantor is selected
4. Edit a guarantee => The borrowers.city of the guarantee is selected
Test plan:
Confirm that the expected behaviors are the ones before and after this patch.
Signed-off-by: Natasha <tasham_8@hotmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
C4::Members::getzipnamecity was not used and can be remove safely.
Test plan:
git grep getzipnamecity
should not return any result.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
This subroutine has been added by
commit 42acfbf75b
Bug 7993: Save reports with Group/Subgroup hierarchy
But it has never been used (or git grep cheats me).
Test plan:
1/ git grep build_authorised_value_list
should not return any result
2/ Create a report, execute it
Everything should work fine.
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works as advertised
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
This subroutine does not make sense anymore (Koha::DateUtils should be
used) and is no longer used.
It can be removed safely.
Test plan:
git grep slashifyDate
should not return any results
prove t/Koha.t
and
prove t/db_dependent/Koha.t
should return green
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
slashifyDate removed, all test pass successfully
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Test plan:
prove t/db_dependent/Koha.t
should return green
git grep AddAuthorisedValue
should not return any results
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
This subroutine is no longer in use.
Test plan:
git grep get_itemtypeinfos_of
should not return any results.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Trivial and needed removal.
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
This subroutine is no longer in used and can be remove.
Test plan:
git grep GetKohaImageurlFromAuthorisedValues
should not return any results.
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works as advertised
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
DESCRIPTION
-----------
Add unit tests to C4::UsageStats
Subroutine :
(V : tested, X : Not tested)
V NeedUpdate
V BuiltReport
X ReportToCommunity
V _count
TEST PLAN
---------
1. Apply patch
2. prove -v t/db_dependent/UsageStats.t
-- All tests should run successfully
/!\ I have 1 warning but I don't know where it can come /!\
(in cleanup) DBIx::Class::Storage::txn_rollback(): A txn_rollback
in nested transaction is ineffective! (depth 1) at
t/lib/TestBuilder.pm line 308
TEST PLAN OPTIONAL
------------------
Go check bug 13899 to see the coverage of this module.
Coverage BEFORE this patch :
Statement : 40,5%
Branch : 0,0%
Condition : 0,0%
Subroutine : 55,6%
Coverage AFTER this patch :
Statement : 81,0%
Branch : 100,0%
Condition : 100,0%
Subroutine : 88,8%
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
From the mailing list:
"I'm working on 3.22.02 and my logs are FILLED with the following warnings:
Members.pm: Unable to load Koha::NorwegianPatronDB at /blurred/C4/Members.pm line 46., referer: http://blurred/cgi-bin/koha/acqui/booksellers.pl
admin-home.pl: Unable to load Koha::NorwegianPatronDB at /blurred/C4/Members.pm line 46., referer: http://blurred/cgi-bin/koha/admin/preferences.pl"
I agree. Looking at C4/Members.pm other warns are all prepended with $debug.
TEST PLAN
---------
1) rm Koha/NorwegianPatronDB.pm
-- quickest and dirtiest way to get the load to fail.
2) echo > ~/koha-dev/var/log/koha-error_log
-- so it will be easy to spot the log changes.
-- back up the log file if you really want it.
3) log into the staff client and go to patrons.
-- Check the log file. "Unable to load ..." will be there.
4) echo > ~/koha-dev/var/log/koha-error_log
5) sudo vi /etc/apache2/sites-enabled/{your koha site file}
-- Find your staff client entry in your apache
configuration file and add:
SetEnv DEBUG 1
6) sudo service apache2 restart
7) apply the patch
8) refresh the patron page
-- "Unable to load..." will still be there.
9) change the DEBUG value in your apache config to 0
10) sudo sevice apache2 restart
11) echo > ~/koha-dev/var/log/koha-error_log
12) refresh the patron page
-- "Unable to load..." will NOT be there.
13) git checkout origin/master -- Koha/NorwegianPatronDB.pm
-- to bring it back.
14) refresh the patron page
-- "Unable to load..." will still not be there.
15) run koha qa test tools
Signed-off-by: Philippe Blouin <philippe.blouin@inlibro.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
1; was not at the end of the module as it should be
to ensure compilation returns true
return it to last line of code where it should be
This patch fixes an ovious mistake.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
This problem was discovered the hard way:
- Drop DB
- Create DB
- Webinstaller run until the screen is:
We are ready to do some basic configuration.
Please install basic configuration settings to continue the installation.
-- The error log file will end with an error about splitting
an uninitialized value.
TEST PLAN
---------
0) First patch already applied
1) prove -v t/Languages.t
-- success, but warn prints
2) Apply this patch
3) prove -v t/Languages.t
-- success without warning messages
4) run koha qa test tools
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works as described. QA test tools run OK
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Test plan:
Log you in!
Without this patch applied, you will get a warning
"Fetching the value or values of a single named parameter"
With this patch applied, the warning from C4::Auth line 401 should not
appear anymore in the log file.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Note: no warnings for older CGI versions.
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Some devices are using patron information responses to validate
patron passwords to govern access to facilities as we
were using C4::Auth::checkpw_hash this only worked in a db password
context not other authentication routines.
The C4::Auth routines are not very consistent and there isnt a dropin
replacement for checkpw_hash this calls checkpw instead.
In a password only environment this behaves as the old version did
returning field CQ as Y if a valid password or no password is passed in
the patron info request and N if an incorrect password is supplied
It should also test against the appropriate authentication sources if
othere autrhentication schemes are in use
Signed-off-by: Liz Rea <liz@catalyst.net.nz>
Tested this with a client who reports that this enables SIP authentication to work correctly with their LDAP server.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
This patch moves the Button area all tables which does not redefine the
dom/sDom DT parameter.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
This patch specifically adds a test for the sub added to
resolve Bug 15479. As no test script existed to add this two
added one which also tests that ILS objects can be instantiated
correctly and offer the required interface
NOTE: This does not apply without the first patch.
Comment #3 suggested a unit test that would fail
before and pass after. So while this code is good,
it missed the before case. -- mtompset
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
The borrowers table is defined COLLATE=utf8_unicode_ci which means
that cardnumbers may be saved in either lowercase or uppercase and
these are considered equivalent.
The server was performing a case sensitive comparison between
the incoming patron identifier and that retrieved from the db
As a result some renewals were rejected as being on loan to
another borrower if the stored cardnumber differed in case.
Make code comparison comply with db.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Check in and check out were failing for me.
Specificly, the $borrower->{flags}->{...} was not accessible as
a hash, so I put a hash ref check around the code that would fail.
TEST PLAN
---------
1) Attempt a checkout
-- blows up with "1" not being allowed as a hash ref.
2) Apply patch
3) Attempt same checkout again
-- success
4) prove -v t/db_dependent/Circulation_dateexpiry.t
-- this triggers CanBookBeIssued
-- this should succeed
5) prove -v t/db_dependent/rollingloans.t
-- mine skipped the tests, but if configured, it
should also trigger and succeed.
6) run koha qa test tools
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Nearly all cellular providers allow a person to send an text message to a cellular
phone by sending an email to phonenumber@provider. We can leverage this capability
to add the ability for Koha to send sms messages to patrons without the need to
subscribe to an sms gateway server.
Basic plan:
1. Add a table sms_providers to the db to tell Koha what service providers are available, and what domain emails should be sent to.
2. Add borrowers.sms_provider_id to tell Koha which mobile service the patron subscribes to for the number given in smsalertnumber
3. Modify Koha to send an email rather than using SMS::Send if the driver is set to 'Email'
Test plan:
0) Get a mobile phone
1) Apply the patch
2) Run updatedatabase.pl
3) Set the value of SMSSendDriver to 'Email'
4) Go to the admin page, the "Additional parameters" area should now have the link "SMS cellular providers"
5) On this page, add some providers. Make sure to add the provider for your own cellular phone service.
Here are some examples:
Sprint phonenumber@messaging.sprintpcs.com
Verizon phonenumber@vtext.com
T-Mobile phonenumber@tmomail.net
AT&T phonenumber@txt.att.net
Only add the domain part in the 'domain' field. So for Verizon, that would be 'vtext.com'
6) Create an account for yourself, add your SMS number, and select your provider from the dropdown box directly below it.
7) Enable SMS messaging for Item check-in and Item checkout
8) Check out an item to yourself
9) Run process_message_queue.pl
10) Wait! You should receive a text message shortly, when I tested it, I received my sms message within the minute.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Revert "DBRev to make notes of the XSS patches and the new important dependency."
This reverts commit e140603a59.
Revert "Bug 13618: Specific for branches.opac_info"
This reverts commit 06e4a50f00.
Revert "Bug 13618: (follow-up) Specific for other prefs"
This reverts commit d6475a111f.
Revert "Bug 13618: Fix for debarredcomment and patron messages"
This reverts commit dd98c9df92.
Revert "Bug 13618: Do not display html tags in patron's notices"
This reverts commit a065b243fe.
Revert "Bug 13618: Do not display and html tags in item fields content"
This reverts commit baeeaffbf8.
Revert "Bug 13618: Fix for system preference description"
This reverts commit a967a09261.
Revert "Bug 13618: Remove html filters for newly pushed code"
This reverts commit 0e98662b10.
Revert "Bug 13618: (follow-up) add missing lines for opac-shelves"
This reverts commit fc2fb605e5.
Revert "Bug 13618: (follow-up) Specific for ColumnsSettings"
This reverts commit bc308fdd9c.
Revert "Bug 13618: Fix for edit biblios and items"
This reverts commit 811c4e8402.
Revert "Bug 13618: followup to remove tabs"
This reverts commit ca8e8c397c.
Revert "Bug 13618: Fix last occurrences recently introduced to master"
This reverts commit bb417b256b.
Revert "Bug 13618: Fix for news"
This reverts commit ae5b98020a.
Revert "Bug 13618: Fix escape on sending baskets or shelves by email"
This reverts commit a7731ffe25.
Revert "Bug 13618: Specific for XSLTBloc"
This reverts commit 11fa38dc29.
Revert "Bug 13618: Specific for Salutation on editing a patron"
This reverts commit 36c07ad6d3.
Revert "Bug 13618: Specific for other prefs"
This reverts commit e6ea281a3b.
Revert "Bug 13618 - memberentrygen.tt errors Not a GLOB reference"
This reverts commit 7824874557.
Revert "Bug 13618: Specific for ColumnsSettings"
This reverts commit 1834da3da3.
Revert "Bug 13618: Specific for IntranetUser* and OPACUser* prefs"
This reverts commit 21ae62b253.
Revert "Bug 13618: Fix error 'Not a GLOB reference'"
This reverts commit 602bdbab4c.
Revert "Bug 13618: Specific for the ISBD view"
This reverts commit d254362435.
Revert "Bug 13618: Specific for pagination_bar"
This reverts commit 8837a8ae68.
Revert "Bug 13618: Specific places where we don't need to escape variables - intra"
This reverts commit 00eff140b3.
Revert "Bug 13618: Remove html filters at the intranet"
This reverts commit 7db851ff03.
Revert "Bug 13618: Specific places where we don't need to escape variables"
This reverts commit 49a3738b8d.
Revert "Bug 13618: Remove html filters at the OPAC"
This reverts commit cedaa0e23e.
Revert "Bug 13618: Use Template::Stash::AutoEscaping to use the html filter"
This reverts commit 01b38d3b13.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Bug 8064 (Merge several biblio records) change some code used in both
biblios and authorities merge tool without updating the authorities
merge tool.
This patch fixes that.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
C4::ItemType can be now removed safely, there is no use of this module.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
This patch mainly replaces C4::ItemType->all with
Koha::ItemTypes->search.
Test plan:
At the places where the C4::ItemType module was used, confirm there is
no regression:
- acqui/neworderempty.pl
- catalogue/itemsearch.pl
- admin/item_circulation_alerts.pl
and the 2 cataloguing plugins:
- marc21_linking_section.pl
- unimarc_field_4XX.pl
QA step:
prove t/db_dependent/HoldsQueue.t should return green
Note that the tests were buggy.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Revert "Bug 6679 - [SIGNED-OFF] fix 2 perlcritic violations in C4/Installer/PerlModules.pm"
This reverts commit 0e356b214e.
Fixing the evals in PerlModules.pm to pass perl critic has caused
a regression. If appears that using a block eval will not work here,
at least not in its current form.
This patch includes:
[1] Adds primary key borrowernumber to new table.
[2] Fixes collation.
[3] Removes manual PK in DBIx schema file.
[4] Fixes typo CompletePasswordRevovery.
[5] Removes use strict from opac-password-recovery; Modern::Perl is used.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Koha already has a sub that creates salts, so lets use that instead of math::Random::secure, so as not to add a new dependency.
Made the references to "Forgotten password" consistent, including adding it to the title of the page.
Also removed the individual error for "this email doesn't belong to this account" as that could expose the existence of a login, which I think we'd rather not do.
Made some of the text more grammatically correct, and more library specific.
To test:
Apply on top of all of the other patches.
All the usual checks, plus make sure there are no typos in any text references.
Signed-off-by: Marc Veron <veron@veron.ch>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
This is a collection of changes taken from different comments (but mostly comment 21 and comment 122).
Passes qa and prove, on my machine at least.
There's also a new test file, Passwordrecovery.t, which covers every method of C4::Passwordrecovery.
To test:
All normal checks plus :
1/ Receive the email
2/ Click on the link
3/ Change the pwd
4/ Click again on the link
5/ You should immediately get an error message
Problems with Math/Random/Secure.pm, is solved in following patch, signing off
Signed-off-by: Marc Veron <veron@veron.ch>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Check to make sure the messages from the qa checker are gone.
Note I'm not sure about this one because my test tools are apparently broken, and I can't get the error to manifest.
Amended patch by Jonathan Druart: Add a blank line before =head2
It now passes.
Signed-off-by: Marc Veron <veron@veron.ch>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Use the new library to search for borrowers.
Changed how the $borrower variable is used since it is now a Koha::Borrower object.
Removed the $protocol parameter from the generated link. It should be included in the OPACBaseURL syspref.
modified: C4/Passwordrecovery.pm
modified: opac/opac-password-recovery.pl
Signed-off-by: Marc Veron <veron@veron.ch>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
I've addressed a lot of Liz Rea's points.
1. I have moved the code from updatedatabase.pl and kohastructure.sql to a file in the atomicupdates directory.
1a. The feature is now off by default when the atomicupdate is run.
2. The password reset link is now visible on the home page, in the modal box and on opac-user.pl .
3. The password recovery pages now use bootstrap markup.
4. I am unsure here. I see "New Password:" and "Confirm new password:".
5. This should still work :).
6. I could not reproduce.
7. I have added the userid field.
You can now reset the password by submitting either your useid or email address.
Both fields can be filled, but the email address must be one of the borrower's (email, emailpro or b_email).
When entering only the email address and two borrowers use that same address, the system tells the user to try with another address or to specify his userid.
8. The text is in the atomicupdate file. Have at it, anyone.
Concerning the email. It is inconvenient for the use to have to wait X minutes for the message queue the be processed.
Maybe we could add a sub in Letters.pm that:
Takes the same argments as EnqueueLetter
Sends the letter.
Saves the letter in the message queue with a 'sent' status.
TEST PLAN:
Setup)
1) apply the patch
2) go to system preferences OPAC>>Privacy and set 'OpacResetPassword' to ON.
2b) make sure that OpacPasswordChange is also ON.
A)
1) refresh front page, click on 'Forgot your password' and enter a VALID address
1b) Also try an INVALID address (valid yet not in your koha db). An error message will show up.
2) An email should be received at that address with a link.
3) Follow the link in the mail to fill the new password.
Until a satisfactory new password is entered, the old password is not reset.
4) Go to main page try the new password.
B)
1) Repeat the password reset, this time use the userid (username) field.
2) Try to reset the password using a userid and an email not linked to the account. An error appears.
3) Make sure the borrower has many available email addresses.
4) For each email, reset the password using both the userid and the email. The link should be sent to the specified address
C)
1) Make sure two borrowers use the same email.
2) Repeat the reset procedure in test case A). An error message appears
http://bugs.koha-community.org/show_bug.cgi?id=13068
Author: Maxime Beaulieu <maxime.beaulieu@inlibro.com>
Followed test plan. Works as described.
Signed-off-by: Marc Veron <veron@veron.ch>
New sign-off after testing all patches together
Signed-off-by: Marc Veron <veron@veron.ch>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Add two scripts for indexing: koha-index and koha-index-daemon.
Documentation:
perldoc koha-index
perldoc koha-index-daemon
New dependencies:
MooseX::Getopt
MooseX::RW
AnyEvent::Processor
Available as a Debian package: libmoosex-getopt-perl
Test plan:
- Apply the patch
- Install dependencies, if necessary
- Reindex a whole biblio catalog:
koha-index --verbose
- Reindex a whole authorities catalog:
koha-index --source authority --verbose
- Modify 1 biblio record, and index it:
koha-index --select queue
- Modifiy 1 authority record, and index it:
koha-index --select queue --source authority
- Run indexing daemon, with a 15s timeout:
koha-index-daemon --timeout 15
- Modify a biblio record: wait 15s, and see
- Modify an authority record: wait 15s, and see
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Works well, followed test plan without problems
One comment: perhaps an option for koha-index-daemon
to work quietly, without printing information.
No koha-qa errors, but new files don't have license,
fixed in followup
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
When Koha export a bibliographic record to DC, makes it in XML format.
This XML not follows the DC-XML recommendations as should be: elements
in uppercase eg. dc:Date, dc:Creator, section 4.2, recommendation 4
explain that "The property names for the 15 DC elements should be all
lower-case." eg. dc:date, dc:creator" and section "4.3 Example - a
simple DC record", xsi:schemaLocation="http://example.org/myapp/http://example.org/myapp/schema.xsd" schema does not exist.
NOTE: This new feature implement the XSLT transformation for OAI-DC,
SRW-DC and RDF-DC
Test plan
---------------
1) Download Dublin Core file from record detail page. Open up the file,
and make sure that the document not follows the DC-XML
recommendations as should be.
2) Apply patch.
3) Go to whichever bib record in OPAC or staff and click on Save >
Dublin Core. A modal will display, prove all options.
4) Change the system preference 'Opac ExportOptions' by enabling and
disabling Dublin Core and try to download a record.
5) Try several bibliographic records in any format (book, magazine, DVD,
etc.) to confirm that properly exported.
6) Test with all marc flavours.
Sponsored-by: Universidad de El Salvador
Signed-off-by: Frederic Demians <f.demians@tamil.fr>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
When duplicating a budget we now have the possibility to change amounts
of budget and funds by a given percentage. Additionally, we can
configure how to round the amounts.
Test plan:
1. Create a budget and several funds with different amounts
2. Duplicate it using the 2 new options
3. Check that the amounts are correct
Signed-off-by: Frederic Demians <f.demians@tamil.fr>
It works exactly as advertised. Was happy to see that decimal point
can be used: for example, increase a budget by 2.6%, and round the
amound to 0.5.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
The C4::Branch::get_branchinfos_of subroutine has been removed by bug
7034, but 2 occurrences have been left
git grep get_branchinfos_of
C4/Branch.pm: &get_branchinfos_of
t/db_dependent/Branch.t: get_branchinfos_of
Test plan:
git grep get_branchinfos_of
should not return any occurrences.
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Vestiges removed
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Expression form of "eval" at line 71, column 9. See page 161 of PBP. (Severity: 5)
Expression form of "eval" at line 85, column 13. See page 161 of PBP. (Severity: 5)
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
- Subroutine prototypes used at line 86, column 1. See page 194 of PBP. (Severity: 5)
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
If you use multiple instances on one server, you could have the situation
that instance A creates the cgisess subfolder and instance B could have a
permission problem. This patch resolves that by allowing each instance to
have its own cgisess subfolder.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
When some users want to improve performance, one suggestion is to switch the syspref "sessionstorage" to 'tmp',
which store the session info in the /tmp directory instead of the database.
Depending on the frequency of the cleaning process (or lack thereof),
this can be heavy pollution into the /tmp directory, making it unusable.
"rm cgi*" would not even work since cgi* extends to over 8000 items...
A simple fix is to modify the target directory in C4/Auth.pm to /tmp/cgisess.
Testing scenario:
1) change the syspref SessionStorage to 'tmp'
2) Log into the OPAC, validate that a file named /tmp/cgisess_(something) got created
3) Apply the patch
4) Log into the OPAC, validate that a file /tmp/cgisess/cgisess_(something) got created
Signed-off-by: Magnus Enger <magnus@libriotech.no>
Works as advertised. Session files are created in /tmp/cgisess/ instead
of directly in /tmp. I usually store sessions in memcached, but a
couple of times memcached has died on me, and before I knew it, /tmp
was so full of sessions files, I could not easily delete them with
"rm /tmp/cgisess*". Being able to delete /tmp/cgisess/ should be a
bit easier.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
It seems better to check if parameters exist at the beginning of a
subroutine.
It makes the code easier to read and there is 1 indentation level less.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Ensure that a passed MARC::Record is defined before calling
its methods. Otherwise you are open to occurences of the
error 'Can't call method "field" on an undefined value'
In a CGI environment you can live with such sloppiness but
in a persistent environment the error can cause the instance
to abort.
Made all routines passed a MARC::Record validate it before calling
its methods. Changed the parameter name from the meaningless
record to marcrecord to indicate its content. Added an explicit return
for all cases where no valid data returned. Cleaned up some logic for
clarity. I think we can assume that GetNormalizedOCLCNumber meant to
look at all 035s till it found an OCLC number not just the first.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
It appears that if the course item is edited by clicking the edit link
from an active course, the course item will be set to enabled and the
fields will be swapped, if the same course item is edited from a course
that is *not* active, the course item will be set to *not* enabled, and
the original fields will be swapped back in!
The short term work-around is to only edit course items from an enabled
course if the item has a course that is enabled. If all the courses it
is on are disabled, it doesn't matter what course the item is edited
from.
Test Plan:
1) Create two courses, 1 enabled and 1 disabled
2) Add an item as a course reserve to both courses
3) Edit the course reserve data for the item via the enabled course
4) Note the course item is enabled ( easy way is to check the database )
5) Edit the same course reserve data, but via the disabled course
6) Note the course item is now disabled even though it is part of
an enabled course!
7) Apply this patch
8) Repeat steps 1 through 5
9) Note the course item is still enabled
Signed-off-by: Margaret Holt <mholt@bastyr.edu>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
This rewrites the while loop into a for loop, so $i still gets
incremented when we call next
Signed-off-by: Frédéric Demians <f.demians@tamil.fr>
Make sense. Add readability. Infinite loop no more possible.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
Patches previously applied in reverse order.
Bug 6657 modified the way C4::Biblio::TransformHtmlToMarc operates in order to
solve an issue occuring during biblio record cataloguing. But this function is
also used by authorities cataloguing, and the code in this case is irrelevante.
This followup allows to distinguish for which kind of record
TransformHtmlToMarc is called: biblio/authority.
A bug appears in authority creation without this patch in some circunstances:
when authid is linked to 001 field.
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Tested with a new authority record
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
To Test:
Read perldoc C4/Overdues.pm
Confirm that it says CalcFine returns four values and that rest of the documentation is correct
NOTE: only a little visual ugliness, but definitely an improvement.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
Bug 6657 modified the way C4::Biblio::TransformHtmlToMarc operates in order to
solve an issue occuring during biblio record cataloguing. But this function is
also used by authorities cataloguing, and the code in this case is irrelevante.
This followup allows to distinguish for which kind of record
TransformHtmlToMarc is called: biblio/authority.
A bug appears in authority creation without this patch in some circunstances:
when authid is linked to 001 field.
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Tested with a new authority record
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
This rewrites the while loop into a for loop, so $i still gets
incremented when we call next
Signed-off-by: Frédéric Demians <f.demians@tamil.fr>
Make sense. Add readability. Infinite loop no more possible.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
'searchdomain' and 'properties' were hardcoded in this subroutine.
Now there are in the admin script. Not a big deal, we could improve that
later if someone wants to add a third values.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
http://bugs.koha-community.org/show_bug.cgi?id=15294
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Test plan
1/ enable OpacAddMastheadLibraryPulldown
2/ Defined a group of libraries as searchdomain
and tick 'show in pull down'
3/ At the OPAC, go on the advanced search form, limit by the group of
libraries you have just created.
4/ The group should be selected by default in the dropdown list
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
http://bugs.koha-community.org/show_bug.cgi?id=15294
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
This verification is now done in admin/branches.pl, no need for a
special subroutine/method, it's 1 line only called once.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
http://bugs.koha-community.org/show_bug.cgi?id=15294
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
This subroutine is not used anymore and was not really useful.
The branchcategories table has a primary key defined on categorycode.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
http://bugs.koha-community.org/show_bug.cgi?id=15294
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
These 2 subroutines are not used anymore, there were only used from the
admin script rewrote on bug 15294.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Prior to this patch, the itemtypes were displayed ordered by the code
(itemtypes.itemtype DB column).
This patch will make them displayed by the description displayed (the
translated description).
Test plan:
0/ Do not apply this patch set
1/ Confirm that the itemtypes are displayed ordered by code (when adding
an item, cataloguing/additem.pl)
2/ Confirm that t/db_dependent/Koha.t does not pass
3/ Apply the test patch
4/ Confirm that t/db_dependent/Koha.t pass
5/ Confirm that the itemtypes are not displayed by description (on
additem.pl)
See comment #3
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
It could be undefined.
Test plan:
prove t/db_dependent/Suggestions.t
should return green.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
The test t/db_dependent/AuthoritiesMarc.t fails because one test expect
the BuildSummary subroutine to not crash if the authtypecode passed in
parameter does not exist in the DB.
Test plan:
prove t/db_dependent/AuthoritiesMarc.t
should return green.
Signed-off-by: Frédéric Demians <f.demians@tamil.fr>
Test fails before patch, and doesn't anymore after.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
It's a bit confusing to have RESERVESLIP named "Hold Slip", we should
finish the job and recode the slip.
Test Plan:
1) Apply this patch
2) Run updatedatabase.pl
3) Try printing a hold slip, you should note no difference
from pre-patch behavior
Followed test plan. The slip is triggered if you want to check out
an item that is reserved / on hold for another patron. Works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This is similar to bug 12877
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
While this is missing a detailed test plan, what I did to test was
1/ Login to koha .. it works
2/ Apply patch
3/ Login to koha .. it still works, no regressions. I can't test the
shibboleth part but it doesnt break anything else so I'm happy to sign
off
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
We had to implement this fix for one of our customers using Shibboleth.
Can verify that it fixes the issue (which, incidentally, breaks
stage-marc-import since that depends on a constant sessionID).
Passing QA (verified with QA tools). Thanks, Martin!
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
There is already a syspref called "OverdueNoticeBcc" for sending Bcc
copies of mails sent for overdues and other notices. This patch add a
new syspref ClaimsBccCopy to bcc the claimacquisition and clamissues
alerts.
Changed the wording of the system preference to:
[Send|Don't send] blind copy (BCC) to logged in user when sending
serial or acquisitions claims notices.
Signed-off-by: Frédéric Demians <f.demians@tamil.fr>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Currently if the AnonymousPatron system preference is in use, all patron
data is anonymized. Some libraries would like to be able to see the last
patron who returned out an item ( in case of damage ) but still keep all
other patrons anonymized.
* Add the table items_last_borrower ( id, itemnumber, borrowernumber )
* Add new system preference StoreLastBorrower
* If StoreLastBorrower is enabled, upon checkin have Koha insert into
this table the patron who last returned this item. Replace existing
row based on itemnumber if exists.
* If table has a row for a given item, link to the patron from the item
details page.
Test plan:
1) Apply patch
2) Run updatedatabase.pl
3) Enable StoreLastBorrower
4) Issue an item to a patron and return said item
5) Issue the same item to a second patron, do not return it.
6) View moredetail.pl for the given bib, find the given item. There
should be a new field in the history list 'Last returned by' with a link
to the last patron to return the item.
Optionally, you can also verify this works even if patron issuing
history has been set to anonymize issues upon return.
Signed-off-by: Nick Clemens <nick@quecheelibrary.org>
Signed-off-by: Jen DeMuth <JDeMuth@roseville.ca.us>
Signed-off-by: Tom Misilo <misilot@fit.edu>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Test this patch with the previous one.
Signed-off-by: Frédéric Demians <f.demians@tamil.fr>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
These 2 subroutines are now not necessary anymore, we can use
Koha::Authority::Types to retrieve the authority types.
This patch won't be easy to test. Indeed, a lot of file are updated.
To test it I would suggest to focus on the merge authority
You should also confirm that the authtypecode and the authtypetext
values are correctly displayed when navigating in the authority module.
Signed-off-by: Frédéric Demians <f.demians@tamil.fr>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
There are 3 place where the auth_types table were requested directly
from the script or a subroutine. These 3 occurrences are easy to
replace with the new module.
Test plan:
1/ Search for authorities and use the "did you mean" feature for
authorities.
Focus on the authtypecode
2/ Edit authority and biblio frameworks.
The "Thesaurus" dropdown list should be correctly populated (UNIMARC
only).
Signed-off-by: Frédéric Demians <f.demians@tamil.fr>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
The existing Koha::Authority does not use Koha::Objects and does not
exclusively deal with DB objects.
It makes much sense to move it to let the space free for a
Koha::Authority and Koha::Authorities modules based on Koha::Object.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
If a record has more than 20 items, all the items over 20 will show as
available on the search results even if they are not!
This is a hard coded limit in the Search module. This number should be
configurable.
Test Plan:
1) Create a record with more than 20 items
2) Set all the items to waiting holds or in transit
3) Search for results that will include that item
4) Note some say they are available even though they are not
5) Apply this patch
6) Run updatedatabase.pl
7) Set the new system preference MaxSearchResultsItemsPerRecordStatusCheck
to a number larger than the number of items on your record
8) Re-run the search
9) Note that the hold and transit statuses for the items are now correct
Signed-off-by: Andreas Hedström Mace <andreas.hedstrom.mace@sub.su.se>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Currently the fee is applied on if all items for the record are issued
and at least one hold already exists on the record.
This patch does not give a complete answer to the problem (see
discussion on bug 13592 for the other user's expectations).
It only adds the ability to charge for any hold placed regardless of the
conditions.
Test plan:
1) Execute the updatedb entry to insert the new pref
2) Confirm that the behavior is the same as before applying this patch
3) Change the HoldFeeMode pref to 'always'
4) Note that the fee is applied for any hold placed
Signed-off-by: Sally Healey <sally.healey@cheshiresharedservices.gov.uk>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
[1] Improve readability, add some checks.
[2] Add the public flag for OPAC use. (If a file has not been marked as
public, we should not return it in OPAC.)
Test plan:
See original commit. No changes in behavior.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Koha::Upload allows files to be attached to bibliographic records.
HTML5Media streaming in Koha does not work with these files.
Test plan:
- apply patch
- make sure OPACBaseURL is set correctly
- enable HTML5MediaEnabled in OPAC and staff client
- connect upload.pl to 856$u in your framework
- upload a file with an extension set in HTML5MediaExtensions,
make sure to set the codec correctly if you use WEBM (subfield c,
eg. 'vp8, vorbis')
- save record, view in staff client and browser, check if 'Play
media' option is available and works
Signed-off-by: Hugo Agud <hagud@orex.es>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch adds the ability to set the maximum fine for a given item to
its replacement price ( assuming the replacement price is set ). If
overduefinescap is also set, the fine will be the lesser of the two, if
both apply to the given overdue checkout.
To enable this new limit, create or edit your circulation rules and
check the checkbox for "Cap fines at replacement price"
Test Plan:
1) Apply this patch
2) Run updatedatabase.pl
3) Pick an item, and set it's replacement price to 3.99
4) Edit the circulation rule that would apply to this item
and the patron you will check it out to.
5) Check out the item to the patron, and backdate the due date
such that the fine generated would be more than 3.99
6) Enable CalculateFinesOnReturn
7) Return the item, and view the fine generated, it should be 3.99
Signed-off-by: Cindy Murdock Ames <cmurdock@ccfls.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
It's possible to redirect the std output to a variable, it will avoid to
add this new dependency.
Signed-off-by: Frédéric Demians <f.demians@tamil.fr>
OK. + code factorisation with a function call.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Koha OAI server has been done in one unique .pl file because there
wasn't any object model or rules in the Koha project when it has been
coded. This patch modularized existing classes, putting each class in a
separate file in Koha::OAI::Server namespace. UT begining.
Add new dependency: Capture::Tiny
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
OAI server moduralized succefully. Works for Debian Jessie and
Wheezy. Test pass successfully
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@quecheelibrary.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch is a _requirement_ to Bug #12771, and will be necessary once we start managing more than 3 levels of overdue notice
TEST PLAN
1) Create or improve on overduerules data
.1) Intranet -> tools -> overdue notices
.2) Make sure to have data in first, second and third tabs
.3) Make sure to have checked mixes of Email/Phone/Print/SMS (depending on availability)
.4) Make sure to have different letters and delay on first/second/third tab for at least one category
.5) Remember it all.
2) Apply patch
3) run installer/data/mysql/atomicupdate/update_13624_overduerules_transport_type.pl
4) run t/db_dependant/Overdues.t
5) Validate Overdue Notice page
.1) validate data entered previously is still there
.2) Add some more, save changes, validate
In installer/data/mysql/atomicupdate/update_13624_overduerules_transport_type.pl
- A new column and primary key, 'overduerules_id', is added to the table 'overduerules'
- A new column referencing a foreign key, 'overduerules_id', is added to the table 'overduerules_transport_types'
- The columns 'branchcode' and 'categorytype' are removed from the table 'overduerules_transport_types'
- Data is migrated from the old tables to the new ones
In installer/data/mysql/kohastructure.sql :
- Table 'overduerules'
- Added a primary key named 'overduerules_id'
- Table 'overduerules_transport_types'
- Added a foreign key named 'overduerules_id'
- Dropped columns 'branchcode', 'categorycode' since we now have them referenced through 'overduerules_id'
In tools/overduerules.pl
- INSERT and DELETE queries on 'overduerules_transport_types' were changed to reflect the new schema
In C4/Overdues.pm :
- The SQL query of the function 'GetOverdueMessageTransportTypes' is changed to take into account the new design of 'overduerules_transport
In t/db_dependent/Overdues.t :
- The INSERT calls before the tests were changed to take into account the new design of 'overduerules' and 'overduerules_transport_types'
Sponsored by : Halland County Library
Signed-off-by: Jesse Maseto <jesse@bywatersolutions.com>
Signed-off-by: Martin Persson <xarragon@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This code was written before the introduction of Koha::Object(s)
Considering the triviality of updating the code, we should go ahead
and switch this code to use Koha::Object(s) now.
Currently, all serials enumeration data is stored in conglomerated
fashion in serial.serialseq. This makes it extremely difficult to do any
reporting based on the individual sequence values due to this fact. In
addition to the formatted version of the sequence, we should be storing
the individual values as well.
Test Plan:
1) Apply this patch
2) Run updatedatabase.pl
3) Create a new subscription, and add serials to it. The new x y and
z fields should be populated with the same data the replaces {X} {Y} and
{Z} in the enumeration field.
4) Inspect some existing serials. The update script will have made a
best effort to recover the existing enumeration data to store in
separate fields.
Signed-off-by: Paul Landers <paul.landers@ttuhsc.edu>
This patch fixes the filename categorie.pl correcting it by categories.pl
The plurial is usually used for script names in the admin module.
Test plan:
Navigate to the patron categories page.
Signed-off-by: Frédéric Demians <f.demians@tamil.fr>
No reference to categorie.pl anywhere in the code
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch removes code related to stopwords usage. The following methods are removed:
C4::Search->remove_stopwords
C4::Context->stopwords
C4::Context->_new_stopwords
And the buildQuery API was changed (removed the \@removed_stopwords return value).
A follow-up is provided for database changes, to make rebasing easier.
To test:
- Apply this patch
- Do some searches in both intranet and opac interfaces
- Nothing should break
Sponsored-by: Universidad Nacional de Córdoba
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
In C4/Letters.pm, sub _parseletter changes values that are passed by
reference. E.g. patron's expiry date can change from iso format to
syspref format, leading to strange behaviour in the calling routines
(see Bug 15423).
This patch makes sub _parseletter work on a copy of the referenced values.
(Submitted to get feedback - is this the way to go?)
Signed-off-by: Frédéric Demians <f.demians@tamil.fr>
Good solution to real time bomb.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
When searching a patron, search type can be 'start with' and 'contain'.
If the search text contains a space (or a coma), this text is splitted into several terms.
Actually, the search on 'start with' with several terms never returns a result.
It is because the search composes an "AND" SQL query on terms.
For example (I display only the surname part) :
search type = contain :
'jean paul' => surname like '%jean% AND %paul%'
search type = start with :
'jean paul' => surname like 'jean% AND paul%'
The query for 'start with' is impossible.
I propose, for search with start with, to not split terms :
jean paul => surname like 'jean paul%'
One can always use '*' to add more truncation :
jea* pau* => surname like 'jea% pau%'
This bug affects a lot surnames with several terms like 'LE GUELEC' or 'MAC BETH'.
Note that the patch moves :
$searchmember =~ s/,/ /g;
It removes the test "if $searchmember" because $searchmember is tested and set to empty string previously :
unless ( $searchmember ) {
$searchmember = $dt_params->{sSearch} // '';
}
Test plan :
==========
- Create two patrons with firstname "Jean Paul"
- Go to Patrons module
- Choose "Starts with" in "Search type" filter
- Perform a search on "Jean Paul"
=> without patch : you get no result
=> with this patch : you get the two results
- Check you get the two results for search on "Jean Pau"
- Check you get the two results for search on "Jea* Pau*"
- Check you do not get results for search on "Jea Paul"
- Choose "Contains" in "Search type" filter
- Check you get the two results for search on "Jean Paul"
- Check you get the two results for search on "Jean Pau"
- Check you get the two results for search on "Jea* Pau*"
- Check you get the two results for search on "Jea Paul"
- Check you get the two results for search on "Paul Jean"
Signed-off-by: Alex <alexklbuckley@gmail.com>
Tested 4 patches together, works as expected
Signed-off-by: Marc Véron <veron@veron.ch>
Bug 15252 - Patron search on start with does not work with several terms - followup 1
'start_with' is the default value of $searchtype, it can be explicit.
Tested 4 patches together, works as expected
Signed-off-by: Marc Véron <veron@veron.ch>
Bug 15252 - correct UT searchtype value is contain and not contains
Tested 4 patches together, works as expected
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Same as previously.
For these files it's a bit less obvious.
To make sure these changes won't introduce any regression, check that
the variable returned by GetMember is never used to get something
else than a borrower fields.
The 'flags' should not be get neither.
For opac-user.tt it's different, other keys are got but there are defined
in the pl script.
On the way:
- 'showname' is removed (never used)
- fix scope var issue in opac-user.tt (BORROWER_INF.OPACPatronDetails vs
OPACPatronDetails)
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This subroutine does a lot a processing and should only be called when
necessary.
In the get_template_and_user subroutine (so called from any pages of
Koha), it is call to pass the branchcode, title, firstname, surname and
borrowernumber values for the logged in user.
This subroutine calls GetMemberAccountRecords which retrieve the items
infos for all accountlines entries of the logged in user.
On members/members.pl, let's say you have 74 entries in the accountlines
tables, the page will execute 115 SELECT instead of 35 if you don't have any
accountlines entries.
With this patch, the number of SELECT is always 31.
To test this patch you should have technical skills to know what to do.
Note that USER_INFO was an array of... 1 element. Now it's a hashref.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
