This patch adds unit tests for C4::AuthoritiesMarc::BuildSummary
for both UNIMARC and MARC21 and a regression test for the "Odd
number of elements in anonymous hash" warning.
To test:
[1] Run prove -v t/db_dependent/AuthoritiesMarc.t. It should
report one failure.
[2] Apply the main patch.
[3] Run t/db_dependent/AuthoritiesMarc.t again; it should pass.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Currently when a reserve is moved to "waiting" status because it's
acknowledged on checkin, the reserve priorities aren't renumbered. This
causes things to go a bit haywire in the UI, in particular, some
reserves can unjustly end up with priority 1 when they shouldn't. It
also seemed to mess with the logic of who should get it next, but I
didn't look too closely at that.
This patch forces a renumbering so that all the priorities remain
copacetic.
Test plan:
* have a few borrowers, say 4.
* have a biblio with a single item (you can scale this up, it should
work just the same.)
* issue the item to borrower A
* have borrowers B, C, and D place a hold on the item
* return the item, acknowledge that it'll be put aside for B.
* view the holds on the item.
Without the patch:
* the hold priorities in the UI end up being "waiting, 2, 1" when they
should be "waiting, 1, 2".
* in the database "reserves" table, they're really "0, 2, 3" when they
should be "0, 1, 2".
With the patch:
* the hold priorities in the UI end up being "waiting, 1, 2"
* in the database, they're "0, 1, 2"
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Test plan confirms that the problem exists and that the patch corrects
it.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script, especially t/db_dependent/Reserves.t.
Improves priority calculation.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch adds a direct unit test of GetSoonestRenewDate()
and verifies that CanBookBeRenewed() returns a 'too_soon'
error as expected.
To test:
[1] Verify that prove -v t/db_dependent/Circulation.t passes.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch makes the new parameter norenewalbefore known to
unit test Circulation_Issuingrule.t.
To test:
1) Before applying the patch:
prove t/db_dependent/Circulation_Issuingrule.t
2) Notice that the test fails with:
$got->{norenewalbefore} = undef
$expected->{norenewalbefore} = Does not exist
3) Apply the patch.
4) Run test again and it should pass.
Sponsored-by: Hochschule für Gesundheit (hsg), Germany
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
This patch updates two of the tests cases to directly compare
the results returned by get_opac_new with the expected value
by using is_deeply(). Consequently, it removes the use of magic
numbers (which do not stop being magic numbers if they're wrapped
in constants named F1, F2, etc.).
To test:
[1] Verify that prove -v t/db_dependent/NewsChannels.t passes.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This adds the ability to specify whether staff, OPAC,
or slip news entries apply to all libraries or just a
particular library.
With the branch parameter added to key functions in
C4/NewsChannels.pm, function calls in C4/Members.pm,
mainpage.pl, opac/opac-main.pl, tools/koha-news.pl, and
t/db_dependent/NewsChannels.t were needed.
Some license texts were updated.
Templates were modified to display, allow for entry and editing
of the branches selected.
TEST PLAN
---------
1) Having logged into the staff client, is the news displaying
correctly? Have you entered a news item which should not
display for this branch of logged in user?
2) Find a patron (with some items checked out?)
3) Print a slip
- News which is labelled 'All Branches' or for the same branch
as the one printing the slip should display on the slip.
- THIS DOES NOT AFFECT QUICK SLIPS
4) Home -> Tools -> News
- Can you edit a news item?
- Does the change save correctly?
- Can you filter based on location and branch correctly?
- Can you add a new entry correctly?
- Can you delete an entry correctly?
5) Open an OPAC client.
- Does only the news for all branches display?
6) Log into the OPAC client.
- Does the news for all branches and the specific branch display?
7) prove -v t/db_dependent/NewsChannels.t
- Does it run and all succeed?
- Does the code seem to catch the required cases?
8) Comparing the patched and unpatched versions of files affected,
are the license changes missing anything?
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Changed the add and update functions to use a hash reference
for the parameter, so that adding or subtracting parameters
should be easier. Added some POD for the add_opac_news and
upd_opac_news functions, so that developers would know how to
call it.
The hashref changes resulted in being able to return 0 for
failure and 1 for success. This meant adding a couple tests
to the test file.
And while testing, there was some sort of logic problem with
the matter of '' being all, but selecting all only showed
things set for all, and excluded particular languages, or other
interfaces.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Testing was lacking, this tests every function call. As a
side effect, this moved the stub of a test file from
t/NewsChannels.t to t/db_dependent/NewsChannels.t, since the
table opac_news must exist.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Passes all 8 tests
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch adds a regression test for verifying that a
DBIx::Class schema object initialized by Koha database sets up
the database connection to correct store and retrieve UTF8
values as Perl utf8 strings.
To test:
[1] Apply this patch.
[2] Run prove -v t/db_dependent/Koha_Database.t
[3] The test should fail.
[4] Apply the main patch for this bug, then do step 2 again.
[5] The test should pass.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
The new tests will not function if there isn't a valid
configuration (or mocking of preference()) so this patch
moves them to t/db_dependent/Context.t.
To test:
[1] After applying the main patch for this bug, verify that
prove -v t/db_dependent/Context.t passes.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
To test:
[1] Verify that prove -v t/db_dependent/Circulation_issuingrules.t
passes.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
replaces given-when with if-elsif-else constructs.
Tests still pass and code looks good.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
If GetOrder is called with a nonexistent ordernumber or without any
ordernumber, it should return undef.
Test plan:
prove t/db_dependent/Acquisition.t
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Updated number of tests to 68, tests and QA script all happy now.
Looked at a few pages in aquisition using GetOrder as well.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch finishes the work started in one of the previous
follow-ups and allows CardnumberLength to be set to a value
like ',5'. In conjunction with not including cardnumber in
BorrowerMandatoryField, this allows a cardnumber to not be
required but, if present, to not exceed the specified length.
This patch also updates t/db_dependent/Members.t so that
it runs in a transaction, tests the new return value
of checkcardnumber, and manages the CardnumberLength syspref.
To test:
[1] Verify that prove -v t/db_dependent/Members.t and
prove -v t/Members/cardnumber.t pass.
[2] Set CardnumberLength to ",5" and take cardnubmer out of
the BorrowerMandatoryField list.
[3] Verify that you can save a patron record without a cardnumber,
but if you supply one, that it can be at most 5 characters long.
[4] Add cardnumber back to BorrowerMandatoryField. This time, the
minimum length is 1 even though CardnumberLength is ",5".
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
The SearchOrders routine should return the booksellerid and this
patch adds it.
This fixes several problems:
[1] The link to the vendor on the order receive page breadcrumbs
was broken.
[2] The tax calculation in finishreceive.pl didn't run.
[3] The item booksellerid field never got updated during
receipt.
Booksellerid was returned before bug 10723.
Quick test plan:
Go on orderreceive.pl and verify that the vendor link is correct.
Followed test plan. Vendor link is now correct.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch also adds POD and UT for the change in SearchOrders()
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
DBD::Mysql provides a mysql_auto_reconnect flag. Using it avoids
the time required to do a $dbh->ping().
Benchmarks:
use Modern::Perl;
use C4::Context;
for ( 1 .. 1000 ) {
$dbh = C4::Context->dbh;
}
* without this patch on a local DB:
perl t.pl 0,49s user 0,02s system 98% cpu 0,525 total
* without this patch on a remote DB:
perl t.pl 0,52s user 0,05s system 1% cpu 37,358 total
* with this patch on a local DB:
perl t.pl 0,46s user 0,04s system 99% cpu 0,509 total
* with this patch on a remote DB:
perl t.pl 0,49s user 0,02s system 56% cpu 0,892 total
Testing the auto reconnect:
use Modern::Perl;
use C4::Context;
my $ping = $dbh->ping;
say $ping;
$dbh->disconnect;
$ping = $dbh->ping;
say $ping;
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Comment: Real improvement. No koha-qa errors
prove t/db_dependent/Circulation_issuingrules.t produces no error
prove t/db_dependent/Context.t produces no error
Test
1) dumped Koha DB, load it on a non-local server
2) run sample script whit and without patch, local and remote
use Modern::Perl;
use C4::Context;
for ( 1 .. 100000 ) {
my $dbh = C4::Context->dbh;
}
Main difference I note is with remote server
a) without patch
real 0m16.357s
user 0m2.592s
sys 0m2.132s
b) with patch
real 0m0.259s
user 0m0.240s
sys 0m0.012s
I think this could be good for DBs placed on
remote servers
Bug 10611: add a "new" parameter to C4::Context->dbh
When dbh->disconnect is called and the mysql_auto_reconnect flag is set,
the dbh is not recreated: the old one is used.
Adding a new flag, we can now force the C4::Context->dbh method to
return a new dbh.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Bug 10611: Followup: remove useless calls to dbh->disconnect
These 3 calls to disconnect are done at the end of the script, they are
useless.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script. Also checked
t/db_dependent/Holds.t
t/db_dependent/HoldsQueue.t
Tested holds triggering with different settings of
AllowHoldsOnDamagedItems. Works as described.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Changed title and author field for UNIMARC.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Tested for MARC21, NORMARC and UNIMARC by adding temporary set_preference..
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Set marcflavour to MARC21 to make tests pass.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Works for MARC21. But I would prefer a better fix for UNIMARC.
Will send a follow-up for that.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Adding a few unit tests, including the following situations:
Placing a hold when there is a wait.
Placing a hold when there is a future hold.
Calculating priority with future date.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Rebased on January 29, 2014 (marcelr)
Added text on the two 'is'-statements.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch removes the remainder of the old unit test
for bug 10723 and updates the label of the new test that
now checks that SearchOrders({ pending => 1}) omits received
orders.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
C4::Acquisition need more UT, and more robust ones. This patch
adds some.
This patch adds UT to
- GetOrder
- GetOrders
- GetCancelledOrders
- GetLateOrders
It refactors UT for SearchOrders
New UT use 2 new routines, used for check the list of fields returned
by a routine:
_check_fields_of_order
_check_fields_of_orders
These 2 routines could later be used by other UT
_check_fields_of_order has its own UT (tests n°14,15,16).
to test :
prove -v t/db_dependent/Acquisition.t
Signed-off-by: Liz Rea <liz@catalyst.net.nz>
Unit tests pass, passes koha-qa.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Passes koha-qa and t
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch adds locking to rebuild_zebra.pl to ensure that simultaneous
changes are prevented (as one is likely to overwrite the other).
Incremental updates in daemon mode will skipped if the lock is busy
and they will be picked up on the next pass. Non-daemon mode
invocations will also exit immediately if they cannot get the lock
unless the new flag -wait-for-lock is specified, in which case they
will wait until the get the lock and then proceed.
Supporting changes made to Makefile.PL and templates for the new
locking directory (paralleling the other zebra lock directories).
We stash the zebra_lockdir in koha-conf.xml so rebuild_zebra.pl
can find it.
To address earlier QA concerns we:
1. added code to check if flock is available and ignore locking if
it's missing (from M. de Rooy)
2. changed default for adhoc invocations to abort if they cannot
obtain the lock. Added option -wait-for-lock if the user prefers
to wait until the lock is free, and then continue processing.
3. added missing entry to t/db_dependent/zebra_config.pl
4. added a fallback locking directory of /tmp
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Doug merged the original patch with the QA changes.
Just for the record, noting here that the original patch was tested
extensively too by Martin Renvoize.
I have added a followup for some exceptional cases.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch makes Koha <-> Zebra use MARCXML for the serialization when
using DOM, and USMARC for GRS-1.
* The following functions are modified to set the Zebra record syntax
according to the current sysprefs and configuration:
- C4::Context->Zconn
- C4::Context-_new_Zconn
* A new function 'new_record_from_zebra' is introduced, which checks the
context we are in, and creates the MARC::Record object using the right
constructor.
The following packages get touched to make use of the new function:
- C4::Search
- C4::AuthoritiesMarc
and the same happens to the UI scripts that make use of them (both in
the OPAC and STAFF interfaces).
* Calls to the unsafe ZOOM::Record->render()[1] method are removed.
Due to this last change the code for building facets was rewritten. And
for performance on the facets creation I pushed higher version
dependencies for MARC::File::XML and MARC::Record (we rely on
MARC::Field->as_string).
* Calls to MARC::Record->new_from_xml and MARC::Record->new_from_usmarc
are wrapped with eval for catching problems [2].
* As of bug 3087, UNIMARC uses the 'unimarc' record syntax. this case is
correctly handled.
* As of bug 7818 misc/migration_tools/rebuild_zebra.pl behaves like:
- bib_index_mode (defaults to 'grs1' if not specified)
- auth_index_mode (defaults to 'dom')
here we do exactly the same.
To test:
- prove t/db_dependent/Search.t should pass.
- Searching should remain functional.
- Indexing and searching for a big record should work (that's what the
unit tests do).
- Test an index scan search (on the staff interface):
Search > More options > Check "Scan indexes".
- Enable 'itemBarcodeFallbackSearch' and try to circulate any word, it
shouldn't break.
- Searching for a biblio in a new subscription shouldn't break.
- Running bulkmarcimport.pl shouldn't break.
- And so on... for the rest of the .pl files.
[1] http://search.cpan.org/~mirk/Net-Z3950-ZOOM/lib/ZOOM.pod#render()
[2] a record that cannot be parsed by MARC::Record is simply skipped (bug 10684)
Sponsored-by: Universidad Nacional de Cordoba
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This makes it easier to read. Also fixes the test count, and is rebased
against 11499 which is needed to correctly test the patches for this bug
(i.e. indexing mode needs to be correctly set in koha-conf.xml)
To test:
[1] Run prove -v t/db_dependent/Search.t
Sponsored-by: Universidad Nacional de Cordoba
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This adds direct tests of indexing and retrieving
bib records that are larger than the ISO2709 limit
of 99,999 octets.
To test: verify that prove -v t/db_dependent/Search.t passes.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch adds a regression test for ensuring that the
authorisedby field is returned by SearchOrders().
To test:
[1] Upon applying the main patch, verify that
prove -v t/db_dependent/Acquisition.t passes.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch adjusts the new GetLoggedInBranchcode() template function so
that it returns the empty string rather than undef if there is no
active user environment. That way, there won't be lots of undefined
value warnings if/when this function gets used in the OPAC.
This patch also adds test cases.
To test:
[1] Verify that there are no regressions in the main test
plan for this bug.
[2] Verify that prove -v t/db_dependent/Koha_template_plugin_Branches.t
passes.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
The return from GetReservesFromBiblionumber contains an unnecessary
extra variable. In scalar context an array returns its element count.
Maintaining a separate count can lead to unforeseen bugs
and imposes ugly constructions on the subroutine's users.
Remove the useless count variable from the return
This patch also changes the parameters: now the routine takes a hashref.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Placed biblio holds, future holds and item holds. Works as expected.
Tested Holds.t and Reserves.t. Pass.
Tested /cgi-bin/koha/ilsdi.pl?service=GetRecords&id=999 with two holds on
one item. Fine.
C4/SIP/ILS/Item.pm: Looked for "whatever" and "arrayref" and could not find
them anymore. Looks good.
Handled a few unneeded calls in QA follow-up.
Left only one point to-do for serials/routing-preview.pl. See Bugzilla.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
The set of related ISBNs for the first Harry Potter book returned
by OCLC's XISBN service has changed recently, so this patch adjusts
the test to match.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch fixes an issue where chosing 'None' as the sort order
for an authority search would result in zero hits if QueryParser is
eanbled.
This patch also adds some additional test cases.
To test:
[1] Enable QueryParser.
[2] Perform an authority search in the staff interface that
uses 'Heading A-Z' as the sort order and returns hits.
[3] Run the same search, but with the sort order set to 'None'.
No hits are returned.
[4] Apply the patch.
[5] Do step 3 again. This time, hits should be returned.
[6] Verify that prove -v t/db_dependent/Search.t passes.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch duplicates the SearchAuthority tests, with QP enabled.
Searching shouldn't be affected by QP. Instructions for manually
reproducing this can be read in the first comment for the bug entry.
Sponsored-by: Universidad Nacional de Cordoba
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
test plan:
prove t/db_dependent/Acquisition/TransferOrder.t should fail before the
patch and success after applying it.
Signed-off-by: Sonia BOUIS <sonia.bouis@univ-lyon3.fr>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Testing notes on last patch.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Adds three tests to Reserves.t for GetReservesFromItemnumber.
We test if this routine does not return a future next available hold,
a future item level hold. And if it does return a future wait (that is:
a confirmed future hold, using ConfirmFutureHolds).
Note that Holds.t does also contains some basic tests for this routine,
but the additional tests seem to better located in the direct context of
tests for bug 9761 for ConfirmFutureHolds.
Test plan:
Run both t/db_dependent/Holds.t and t/db_dependent/Reserves.t.
Verify if both tests do not fail.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
To test:
1. Run prove t/Category.t
2. Apply patch
3. Run prove t/db_dependent/Category.t - Notice 2 tests were run
Signed-off-by: daniel <daniel.barker.nz@gmail.com>
Made the requested changes.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This test requires a valid Koha context, so this patch
moves it to t/db_dependent.
To test:
[1] Verify that prove -v t/db_dependent/Installer.t passes.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch moves t/Languages.t to t/db_dependent/Languages.t,
as the new get for getAllLanguages() works best if there's
a database available.
To test:
[1] Run prove -v t/db_dependent/Languages.t
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
- Remove unit tests for ParseSearchHistoryCookie, which doesn't exist
anymore
- Add unit tests for ParseSearchHistorySession and
SetSearchHistorySession
- Remove/Modify comments about search history cookie
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Tests fixed and moved, and comments tidied up
Signed-off-by: Charlene Criton <charlene.criton@univ-lyon2.fr>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
By adding the relevant environment variables to the script the generated
koha-conf.xml file for the unit tests is correct now.
Test plan:
- Verify that tests pass now:
$ prove -v t/db_dependent/Search.t 2> /dev/null | grep 11499
Sponsored-by: Universidad Nacional de Cordoba
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Passes unit test, koha-qa.pl
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
t/db_dependent/Search.t creates its own temporary koha-conf.xml and
related files, and it fails to properly set indexing modes for
bibliographic and authority records.
This patch adds regression tests for that.
To test:
$ prove -v t/db_dependent/Search.t 2> /dev/null | grep 11499
The test should fail unless the main page is applied.
Sponsored-by: Universidad Nacional de Cordoba
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This UT got wrapped inside a transaction with autocommit=0 but
the rollback call was inadvertedly ommited. Adding it.
[RM note: an explicit rollback is not required, as the
transaction will roll back automatically at the end of
the DB session. Nonetheless, it hurts nothing to have
it be explicit.]
Sponsored-by: Universidad Nacional de Cordoba
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch clears the subscription table so tests pass correctly if
there happens to have been a subscription with an end date before
2013-08-01.
To test
1/ Add a subscription in the serials module, with an end date before
2013-08-01
2/ run prove -v t/db_dependent/Bookseller.t
Notice tests 22 and 23 fail
3/ Apply patch
4/ run test again
5/ Notice tests succeed
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Tests now clean the subscription table before running
the tests, so that the will always pass.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch corrects a typo that broken ModReserveFill(). This
patch also adds a unit test that (via two levels of indirection)
exercises ModReserveFill().
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
