This is a counter patch.
The idea is to provide a permanent solution for the cookie length issue
we occurred on storing the searches (intranet side).
Test plan:
Launch as many searches as you can (don't forget to sleep).
You should not get any error.
Confirm there is no regression using the results browser.
Tested with 6 parralel searches in different tabs (with alternatively browising up and down). No problems found.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
To test:
1) Create a list in the OPAC, name it: <script>alert('Hello');</script>
2) Delete the list
3) Confirm deletion
4) See the alert say 'Hello'
5) Apply patch
6) Recreate list with same name
7) Delete list
8) Confirm deletion and alert no longer pops up
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Adding |html to [% resultsperpage %] to escape the variable and get rid of the alert.
To test:
1) Go to URL such as ... /cgi-bin/koha/opac-authorities-home.pl?op=do_search&resultsperpage=1%22%3E%3Cscript%3Ealert%28document.cookie%29%3C/script%3E
2) Notice pop-up box with alert
3) Apply patch, refresh page
4) Notice alert is gone
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The current code uses
$barcode = <fh>;
logic. This reads until \n, as far as I can tell.
EOL is indicated by \n, \r, and \r\n depending on OS and software.
So, to this end, rather than File::Slurp (which is a potential
memory hog, which is already an issue with no filters), a loop
to pre-read the barcodes was written.
This loop includes:
$barcode =~ s/\r/\n/g;
$barcode =~ s/\n\n/\n/g;
my @data = split(/\n/, $barcode);
push @uploadedbarcodes,@data;
So, that means that lines ending in \n would have it stripped
and pushed into the uploaded barcodes array.
Lines ending in \r would likely be read as one giant block,
have everything converted to single \n's and then using a split,
the set of barcodes are pushed into the uploaded barcodes array.
Lines ending in \r\n would get that stripped and pushed into the
uploaded barcodes array.
It is then the uploaded barcodes array that is looped over for
validating the barcodes.
TEST PLAN
---------
1) Back up your database
2) Download the three sample files (or create your own)
3) Log in to staff client
4) Create a branch with no inventory.
5) Home -> Tools -> Inventory/Stocktaking
6) Browse for your '\r' test file.
7) Limit to just that branch
8) Click 'Submit'
-- Confirm expected errors
9) Repeat steps 5-8 with the '\n' test file.
10) Repeat steps 5-8 with the '\r\n' test file.
-- one of these repetitions should have problems.
11) Apply patch
12) Repeat steps 5-8 for each of the 3 test files.
-- there should be no issues.
13) run koha qa test tools.
Note: This is a tweak based on Jonathan Druart's comment #16
I have reset it to needs sign off again.
Followed test plan. Works as expected. qa OK.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The builder contains js functions with a parameter like subfield_managed
or i or something similar. This parameter contains the html id of the
field corresponding with the plugin.
With the functionality of Koha::FrameworkPlugin in place, we can eliminate
one js function call and get the same id via the event passed in. Note
that this actually makes the function a 'real' event handler.
Also note that in many cases this parameter was not used but the id
was borrowed from a perl variable like $params->{id}. If the field is not
cloned, this is not a problem. But some fields can be cloned and should
not use the static perl value but should get it from the event.
Test plan:
Look for js errors when loading the marc editor.
Since the Focus or Click event code has been touched for most marc21
plugins, move your cursor into the field or click on the tag editor
button. Verify that the focus event updates the correct field or the
click event correctly launches the plugin AND the value comes back into
the right field.
Bonus: Attach a plugin with popup (like leader) to 040$d. Clone this field.
Verify that the two launch buttons operate on the correct value.
(This resolves a current bug.)
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Checked all 15 plugins.
Plugin marc21_linking_section seems to work, but I could not get it to pass
back something useful into my field. (Same without this patch.)
Tested the clone button with leader on 040d.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
All seems to work, no errors
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch converts marc21 plugins to new style by making the following
modifications:
[1] Replace use strict with use Modern::Perl. This implies that we now
re-enabled warnings. There are no redefine warnings anymore, but note that
we need to silence some warnings from individual plugins that were covered
by disabling the warnings pragma until now. Silencing these individual
warnings is outside the scope of this report.
[2] Sub plugin_javascript is replaced by an anonymous subroutine $builder.
[3] The parameters of $builder are combined in a params hashref. In most
cases we only need $params->{id} for the function name.
[4] Javascript function Clicxxx is renamed to Clickxxx.
[5] The builder does no longer return function_name.
[6] Sub plugin is replaced by subroutine $launcher.
[7] The parameters of $launcher are combined in a params hashref. We only
use $params->{cgi}. Mostly we save that to $input. One exception: $query.
[8] The plugins returns a hash with $builder and/or $launcher.
Test plan:
[1] Run t/db_dependent/FrameworkPlugin.t -incl cataloguing/value_builder/
marc21*.pl. This should catch compile errors and general problems when
building or launching these plugins.
NOTE: You will see several initialize warnings from individual plugins that
were hidden until now by disabling warnings. This is fine; we will be
able to address these warnings now on new reports.
[2] Check behavior of several plugins in the marc editor.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Checked all marc21 plugins. Attached unused plugins to some field.
Some plugins (unused by default) may need some further attention, but
also outside the scope of this report.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
New warnigs, but all seems to work.
No errors.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
marc21_field_003.pl: copy-pasta comment about date removed
marc21_field_005.pl: commented use removed
marc21_field_006.pl: old/irrelevant pod lines
marc21_field_007.pl: old/irrelevant pod lines
marc21_field_008.pl: old/irrelevant pod lines, move sub par line twice
marc21_field_008_authorities.pl: whitespace, old/irrelevant pod lines
marc21_field_040c.pl: two commented lines removed
marc21_field_040d.pl: whitespace, commented lines, old/irrelevant pod
marc21_field_245h.pl: whitespace
marc21_linking_section.pl: relocated some comment lines, and replaced a new
CGI object by the one passed in via the plugin launcher (agreed, this may
not be so trivial as the other changes)
Test plan:
These (trivial) changes are hard to test.
Pick a few plugins and verify that behavior is not changed in the marc
editor.
For the brave: Try marc21_linking_section.pl.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Tried marc21_linking_section.pl :)
(ling plugin to 773$9, create new record, search for parent and check values inserted)
No errors
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Preliminary work on marc21_field_008.pl and 008_authorities.pl.
Moving $dateentered en $defaultval to lower scope level.
date_entered is a new sub (in a module); sub Field008 has been reduced to
one line.
Added a trivial unit test for date_entered.
Note: the format used in date_entered could be added in DateUtils, moving
this logic to a better place.
Test plan:
Use both plugins in the marc21 editor (biblios/authorities).
Run the adjusted unit test.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Both plugins works, no errors
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Preliminary work before converting to new plugin style. Several files still
contained tabs or had strange indentation.
Perltidied: marc21_linking_section.pl
Perltidied: marc21_field_007.pl
Perltidied: marc21_leader_authorities.pl
Perltidied: marc21_leader.pl
Perltidied: marc21_leader_book.pl
Perltidied: marc21_leader_computerfile.pl
Perltidied: marc21_leader_video.pl
Test plan:
Run perltidy -pro=xt/perltidyrc on marc21_linking_section and compare.
Try another one too :)
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Minor differences on comparison :)
No errors
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
There were some issues in the previous patch. This patch fixes the
following:
- rename $value with $original_value
- remove $at_least_one_constraint_failed and $values_ok which make the
code unnecessarily complicated
- the constraints have to be checked only if no original value is passed
- _buildColumnValue created a key to the default value hashref, it broke
the test:
last BUILD_VALUE if exists( $default_value->{$source} );
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Unique constraints should be checked when creating random data. Otherwise
we get failures when the generated data already exists on the DB.
This patch takes advantage of ->unique_constraints() to do the job,
looping through all the unique constraints defined for the source.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Test plan:
1) Go to any detail page in staff
2) Click on the modification log tab
3) Verify, that the object is prefilled with the records biblionumber
and you can also see it as parameter in the url
4) Click a second time on modification log to reset your search
Before this patch, the object parameter was empty.
It now contains the value of the biblionumber.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Work as described, no koha-qa errors
http://bugs.koha-community.org/show_bug.cgi?id=10335
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The condition for the assignment depends on $searchtype to be defined
and equal to 'contains'. So this change doesn't change the semantics.
- if $term !~ /^%/
- and $searchtype eq "contain";
+ if (defined $searchtype) && $searchtype eq "contain"
+ && $term !~ /^%/;
To test:
- Home -> Circulation -> Checkout
- Search for a user that does not exist (I searched 'whywouldthisexist') on the intranet interface.
- Look at the intranet logs
=> FAIL: you get "Use of uninitialized value $searchtype in string eq at.,,"
- Apply the patch
- Repeat the search
=> SUCCESS: No warning
- Sign off :-D
NOTE: Other pages are more forgiving. Tweaked test plan.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Acquisition db tables are missing some indexes to have
performance queries.
This patch adds an index on some columns very often
used in search queries, such as aqbooksellers.name and
aqbudgets.budget_code.
Also adds an index on aqorders.orderstatus, very often used
with hardcoded value like 'cancelled', in various queries.
Test plan :
1) Back up database
2) $ git reset --hard origin/master
3) $ git bz apply 14053
4) In your mysql client
> DROP DATABASE koha_library;
> CREATE DATABASE koha_library;
> QUIT;
-- Obviously you may need to vary koha_library :)
5) Navigate to staff client
-- should be able to set up the DB just fine.
-- this will catch the comma bug that keeps coming in.
6) $ git reset --hard origin/master
7) Repeat step 4
8) Navigate to staff client
-- nothing tested, but we need the DB set up.
9) $ ./installer/data/mysql/updatedatabase.pl
-- atomic updates run without issue.
10) run koha qa test tools
11) Restore DB
12) Try to compare performance after and before
database update. I think query contained in
C4::Acquistion::GetInvoices could be a good example
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
[PASSED QA] If syspref ShowReviewerPhoto is enabled, the reviewer's avatar is displayed beside comments in OPAC. The avatar will be searched on www.libravatar.org using the patron's email address.
This patch changes the text for 'ShowReviewerPhoto'.
To test:
Apply patch
Go to Home > Administration > System preferences
Search for ShowReviewerPhoto
Verify that the new explanation makes sense.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Better explanation, no errors.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Changed mail to e-mail.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The sendbasket/sendshelf scripts and templates do not use email_sender
as a cgi parameter or as a template var. Probably a leftover from previous
changes.
Let's make Koha cleaner :)
Test plan:
[1] Send your cart from opac or staff.
[2] Send a shelf from opac or staff.
[3] Git grep email_sender. No results.
Followed test plan. Works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
C4::Context is only used to retrieve a syspref value.
This patch moves the use of C4::Context to a require.
Test plan:
Try to reach the SetMarcUnicodeFlag subroutine (batchmod, add/update a biblio, etc.)
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Tested on French UNIMARC install
No errors adding/editing biblios
No koha-qa errors
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The synopsis of this TT plugin contains two example lines:
[% myhtml FILTER html2text(leftmargin => 0, rightmargin => 0) %]
[% myhtmltext | html2text %]
These lines have been copied (without too much thought :) to a few templates. Since we do no use the variables myhtml or myhtmltext in these templates, these lines are useless.
Test plan:
[1] Put some items in your cart. And send it.
[2] Send a shelf.
[3] Git grep on myhtml. Should not have results.
NOTE: Sent carts and lists in Intranet and OPAC successfully.
Though, this does bring into question why the letters
have HTML formatting if it is getting removed. That,
however, is beyond the scope of this bug.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
TEST PLAN
----------
1) git reset --hard origin/master
2) prove t/db_dependent/Letters.t
-- horrible failure about transaction
3) apply this patch
4) prove t/db_dependent/Letters.t
-- no issues
5) koha qa test tools.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
TEST PLAN
----------
1) git reset --hard origin/master
2) prove t/db_dependent/Budgets.t
-- horrible failure about transaction
3) apply this patch
4) prove t/db_dependent/Budgets.t
-- no issues
5) koha qa test tools.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
TEST PLAN
----------
1) git reset --hard origin/master
2) prove t/db_dependent/Bookseller.t
-- horrible failure about transaction
3) apply this patch
4) prove t/db_dependent/Bookseller.t
-- no issues
5) koha qa test tools.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
If you have no item plugins, the events variable in BindPluginEvents
of additem.js will be null. So testing events.length will generate
the described error.
This patch adds a check to prevent that from happening again.
Test plan:
[1] Do not yet apply this patch !
[2] Temporarily remove framework plugins from your items (in ACQ or default
framework). Probably you have to clear dateaccessioned.pl and
barcode.pl.
[3] Open js console in your browser.
[4] Go to Acquisition. Open a basket and add an order from a new empty
record.
[5] You should see js error: "TypeError: events is null" (additem.js:176)
[6] Apply this patch and reload the page (make sure that you refresh so
that the new javascript code is read).
[7] The TypeError should be gone.
[8] Restore the framework plugins from step 2. Refresh the page again and
verify that they still work as expected.
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
If a Koha server is configured to run over SSL, all iDreamBooks content
is blocked due to the fact that a secure page is requesting an insecure
endpoint. This is due to the fact that the urls for iDreamBooks use http
and not https. A simple fix would be to switch them to https since
browsers have to qualms about loading a secure data endpoint from an
insecure one.
Test Plan:
1) Enable iDreamBooks
2) Set up your OPAC to use https
3) Verify iDreamBooks content continues to work
Note: tested Chrome and IE, so that the IE change would be validated.
Discovered isbn semi-colon issue that is beyond scope of this bug.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The introduction of system preference objects in bug 13967 has caused
the current testing regimen to fail do to the mixing of DBI mocking and
DBIx::Class.
Test Plan:
1) Apply this patch
2) prove t/db_dependent/Context.t
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The current behaviour for C4::Context->preference when the DB is not still
populated with tables is to return undef. This is used by C4::Auth to identify
the need of running the installer.
This behaviour got broken by bug 13967, which lets DB errors to escalate and
thus Koha gets broken instead of prompting for install.
This patch wraps Koha::Config::Sysprefs->find inside an eval and sets undef if needed.
To test:
- In current master, drop the DB
- Load OPAC and Intranet
=> FAIL: notice an ugly software error.
- Apply the patch
- Load the OPAC
=> SUCCESS: Maintenance mode screen is shown
- Load Intranet
=> SUCCESS: You are prompted the DB credentials to run the web installer.
- Sign off :-D
Tomas
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch makes koha-qa.pl happy by fixing POD issues prior
to this bug.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Running
$ prove t/Biblio.t
fails because of us now using DBIx to retrieve sysprefs. Then our mocked DBI is not "supported" by DBIx hence a warning that makes our test fail (there is one more warning now).
The cool thing about this, is that it actually helped spot a situation where GetMarcBiblio is doing wrong things because is not checking its parameters are undefined, so we have the chance to fix it.
This patch makes GetMarcBiblio return undef if no biblionumber is passed, and
also raises a conveniently carped warning. This change is tested in t/Biblio.t with new tests.
To test:
- In current master, run
$ prove t/Biblio.t
=> FAIL: a test detects a wrong warning count and fails.
- Apply the patch and run
$ prove t/Biblio.t
=> SUCCESS: Tests now pass, and there are 2 new ones.
- Sign off :-D
Regards
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Same as before for the OPAC.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Good result, no errors
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
On the MARC detail page, the columns are displayed in a random order.
This means that you can open 2 different records and see the columns
displayed in a different order.
Test plan:
Go on different MARC detail view and confirm that 1/ all fields are
present and 2/ they always are displayed in the same order
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
1/ & 2/ correct
No errors
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The borrowers.flags values need to be updated to prevent side effects.
Test plan:
Set the borrow permission flags for some borrowers
Execute the updatedb entry and verify the flags has been updated (-128)
only for borrowers with this permission set.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Moved updatedatabase entry (was in wrong position) to atomicupdate
with commented copy of orignal
No koha-qa errors
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The borrow permission was used but uselessly.
For instance, at the opac, the flagsrequired parameter was set to
'borrow' but the 'authnotrequired' was set also (which means no auth
required).
At the end, this permission was used at only 1 place: for the basket,
intranet side.
This can be replaced with the catalogue permission (which is used to
search).
Test plan:
1/ Confirm that you are able to show/download/sent the cart (intranet side)
with the catalogue permission.
2/ At the OPAC, you should be able to access the same pages as before
with any other permissions.
Concretely it is quite difficult to test this patch, you should have a
look at the code.
Signed-off-by: Nick Clemens <nick@quecheelibrary.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The highlight only works on even items.
This patch should resolve it.
Test plan:
Edit biblio with multiple items.
Verify that the highlight is visible on the selected item you edit.
And that there is no highlight for a new item.
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch corrects the display of current page on
a multipage recent comments.
To test:
1) Enable OpacShowRecentComments
2) Add multiple comments to multiple records
I used a script to add multiple lines like
"insert into reviews values ($i, 51, $i, 'Comment $i', 1, '2015-06-01 00:00:00')"
to table reviews
3) On OPAC, go to 'Recent comments', verify the bug
4) Apply the patch
5) Reload and check correct display
Can't found missing space near 'by' from description.
Display is correct for me.
Followed test plan, displays as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch removes the DATE() function from a query on timestamp, and adds a
sub that strips the UTC designators "T" and "Z" from incoming "from" and
"until" arguments in OAI-PMH requests so that they're more compliant with
MySQL (and probably other databases as well). This means that the date
and time for the 'from' and 'until' arguments will be matched correctly
in the database.
This patch also adds 'T00:00:00Z' to 'from' arguments and 'T23:59:59Z' to
until arguments, when only dates are provided via the OAI parameters.
The zero time isn't necessary, since MySQL treats '2013-09-30' as
'2013-09-30 00:00:00' by default. However, the near midnight time
is needed for 'until'. Otherwise, you'll never be able to retrieve
a record with a date/time matching the 'until' argument.
In summary, this patch adds handling for times as well as dates, which
is necessary so that Koha is closer to meeting the actual OAI-PMH spec.
TEST PLAN:
0) Note down a selection of timestamps from your biblio table
1) Enable your OAI-PMH server through the global system preferences
Web services tab.
2) Craft and submit a similar request to the following in your browser:
KOHAINSTANCE/cgi-bin/koha/oai.pl?verb=ListRecords&metadataPrefix=oai_dc&
from=2013-09-02T13:44:33Z&until=2013-09-05T13:44:33Z
Change the exact dates to accord with your timestamps, but keep the
YYYY-MM-DDTHH:MM:SSZ format.
3) Note the unexpected behaviour. A "from" argument with the timestamp
2013-09-02T13:44:33Z will show records from 2013-09-03 but not records
from 2013-09-02 even though the timestamp in the database will say
"2013-09-02 13:44:33".
Also note that records with a timestamp later than 13:44:33 will show
up for the day 2013-09-05, even though they shouldn't.
4) APPLY THE PATCH
5) Resubmit the links you tried above
6) Note that the applicable records now appear (or do not appear) in
accordance with the precise date/time ranges!
--
Developer Note: We could've not stripped the UTC designators and used
DATE() around the parameters in the SQL queries, but that would have
lost the whole purpose of using times in the "from" arguments, since
they would've been generalized to just the dates.
I think this is probably the best solution. Admittedly, creating
"form_arg" and "until_arg" hashrefs in the ResumptionToken object
might not be ideal, but I preferred that to copying the
_strip_UTC_designator subroutine into two other objects. Perhaps this
sub could go somewhere else and be imported into those other two objects
but this seemed to be the most sensible decision. I'm open to other
opinions though.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Works, find results with correct timestamp
No koha-qa errors
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The link on the start page of Koha goes to the pending suggestions tab
explicitly. The link on the acquisition start page doesn't do that so
when you have your own status it might show another tab first.
Patch links to be the same and explicitly target the pending tab.
To test:
- create a new suggestion
- verify link from the acq start page leads to the pending tab
- verify link from the Koha start page does the same
Signed-off-by: Marjorie <marjorie.barry-vila@ccsr.qc.ca>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Test plan:
1. install and activate an additional language
2. create patron in organization category
3. create professional patron
4. try to add this patron to an organization (Guarantor information section)
5. note that the left button text changed to "Change" - untranslated english string
6. push the "Delete" button, the guarantor patron field is cleared and the left button text changed to "Set to patron" - again original english text
7. apply the patch
7.1. update translation (koha-translate -u language_code)
8. repeat 4-6, note, that button text are still translated in all sitations
9. sign off ;)
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Work as described, no errors
Fixed message capitalization
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
There are some issues with serial permissions.
For instance it's not possible to receive serials if the
edit_subscription is not set.
Also the toolbar is empty.
Test plan:
1/ Set the serials => receive_serials permissions to a patron (and only
this one for the serials module).
2/ Verify you cannot create a new subscription, you can search
subscriptions but cannot edit them.
3/ On the serial result list, receive a serial (action > Serial
receive).
You can now change the status and receive it.
4/ On the serial collection, you can edit 1+ serials to reveice it.
5/ Set the serials => edit_subscription permission and confirm there is
no regression.
QA note: I think we should introduce a C4::Serials::can_receive_serials
subroutine, to test the IndependentBranches pref, but I don't want to
add to much processing to check permissions.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Sometimes the today's checkouts do not sort correctly. This is due to a
simple typo in the comparison line where the bad key 'timstamp' is
compared against the correct key 'timestamp'.
Test Plan:
1) Check out a decent number of items in a row ( 5+ )
2) Hopefully you will see they are sorted incorrectly
3) Apply this patch
4) Reload the page
5) Note they are now sorted correctly
Followed test plan. Works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
When I merged 13967 into master (with 5010 already on it) I inadvertedly
removed a few lines that add a check for bad OPACBaseURL values.
While I don't agree with that check it should be discussed on a separate
bug anyway.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Despite the point of the Keyword to MARC Mappings being to simplify the
handling and display of repeated values from multiple subfields, the
holds queue viewer will only display the first value found. What it
should be doing instead is displaying all fields that match the subtitle
keyword.
Test Plan:
1) Apply this patch
2) Define multiple Keyword to MARC mappings for the subtitle keyword
3) Place a hold on a record using those subtitle fields
4) View the hold in the holds queue viewer
5) Note that all the subtitles now appear
Signed-off-by:Heather Braum <hbraum@nekls.org>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This is major problem for plack installations with utf-8 encoding.
In this case, we are overriding CGI->new to setup utf-8 flag and
get correctly decoded $cgi->params, and reset syspref cache using
C4::Context->clear_syspref_cache
Test scenario:
1. under plack try to search with utf-8 charactes
2. try to find patron with utf-8 characters
Signed-off-by: Gaetan Boisson <gaetan.boisson@biblibre.com>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
git grep on function active in additem.tt:
koha-tmpl/intranet-tmpl/prog/en/modules/cataloguing/additem.tt:function active(n
koha-tmpl/intranet-tmpl/prog/en/modules/serials/serial-issues-full.tt:active([%
koha-tmpl/intranet-tmpl/prog/en/modules/serials/serial-issues-full.tt:function a
koha-tmpl/intranet-tmpl/prog/en/modules/serials/serial-issues-full.tt:
t/Cache.t: unless ( $cache->is_cache_active() && defined $cache );
t/Cache.t: unless ( $cache->is_cache_active() );
Conclusion: active in additem seems to be quite inactive.
Test plan:
Add, edit or delete items and verify that you did not miss active :)
NOTE: The active function has a loop which is always run.
Inside that loop 'ong' would always be defined as some number
concatenated with XX.
Both sides of the if/else reference document.getElementById(ong),
but there is only one occurence of XX in the file: the concatenation!
Similarly, the 'link' logic does not correspond to any of the
id= or name= strings in the file.
koha-tmpl/intranet-tmpl/prog/en/modules/admin/marc_subfields_structure.tt
is the only file with "id=\"link" that matches the logic.
This is likely a cut-and-paste remnant made useless by datatable upgrades
and HTML/CSS class changes.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
- Fix filter labels:
Library : -> Library:
Subscription : -> Subscription:
- Make '(All)' entry in filter pull downs translatable
- Show branch name instead of branchcode in table and filter
To test:
- Verify changes as described above
- Verify filters still work as expected
Followed test plan. Works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
See QA comment #5
- new reports log their Id instead of 0
- format info: <name> | <sql>
Signed-off-by: Nicole Engard <nengard@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch sets adds the possibility to log new, update and delete actions for saved reports.
To test:
-Apply patch
-Run updatedatabase.pl
-Enable system preference ReportsLog
-Create, duplicate, edit and delete saved reports
-Go to Home > Tools > Logs
-Verify that you can select "Reports" in Modules list
-Verify that your actions were logged
Signed-off-by: Nicole Engard <nengard@bywatersolutions.com>
Signed-off-by: Nicole Engard <nengard@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
