Test Plan:
1) Enable IndependantBranches
2) Apply this patch
3) Run updatedatabase.pl
4) Verify that the system preference still functions correctly
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Renamed that routine to GetItemCourseReservesInfo in
order to avoid any potential confusion with reserves
qua hold requests.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
New modules should not export any symbols by default
without a very good reason.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Adds a course reserves system for academic libraries.
The course reserves system allows libraries to create courses
and put items on reserves for those courses.
Each item with at least one reserve can have some of its attributes
modified while it is on reserve for at least one active course.
These attributes include item type, collection code, shelving location,
and holding library. If there are no active courses with this item
on reserve, it's attributes will revert to the original attributes
it had before going on reserve.
Test Plan:
1) Create new authorised value categories DEPARTMENT and TERM
2) Create a new course, add instructors to that course.
3) Reserve items for that course, verify item attributes have changed.
4) Disable course, verify item attributes have reverted.
5) Enable course again, verify item attributes again.
6) Delete course, verify item attributes again.
7) Create two new courses, add the same item(s) to both courses.
8) Disable one course, verify item attributes have not reverted.
9) Disable both courses, verify item attributes have reverted.
10) Enable one course, verify item attributes are again set to the
new values.
11) Edit reserve item attributes, verify.
12) Disable all courses, edit reserve item attributes, verify
the item itself still has its original attributes, verify
the reserve item attributes have been updated.
13) Verify the ability to remove instructors from a course.
14) Verify new permissions, top level coursereserves, with
subpermissions add_reserves and delete_reserves.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Corinne Bulac <corinne.hayet@bulac.fr>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
http://bugs.koha-community.org/show_bug.cgi?id=8125
For reasons I cannot fathom, the split() in handling multi-branch
limits was not coming up with a valid search group code. Replacing
the split() with a substr() and creating the CGI parameter as a string
rather than as an arrayref fixes the problem. This problem may not
affect all installations, since I tested this exact feature just under
two months ago and it worked fine, and none of the relevant code has
been changed since then that I can see.
To test:
1) Create search group, and add at least one library to it, in
/cgi-bin/koha/admin/branches.pl
2) Apply patch
3) Try doing a search limited to your search group, making sure that
the search will match items that belong to a library in the search
group
4) Sign off
Signed-off-by: Magnus Enger <magnus@enger.priv.no>
I have failed to recreate the problem on three different dev installs,
both on Ubuntu and Debian, but the current patch does not break
anything as far as I can tell, so I'm signing off.
I tested with two libraries in the same search domain, with each
library owning a different book by the same author. Searching for
the author in
- all libraries,
- individual libraries and
- the search domain that contains both libraries
all return the expected results.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
All tests and QA script pass.
I couldn't reproduce the problem, but didn't find any regressions.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
When try to display card view of retrieved record
error occurred as compact.xsl could not be found
script was constructing path as though it was opac
Also added fallback to en version if no xsl file
found under current lang as done in opac-showmarc.pl
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
Test plan:
* Set sys pref to use CCSR
* Do a Z39.50 Search
* Click 'card' on one of the results
* confirm that there is no error.
All test pass
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
I am astonished that opacthemes affects Z39.50 search in
staff so this might be fixing a bigger problem.
Checked that clicking on Card works for both themes now
correctly after I confirmed the bug.
Also all views in OPAC were checked for both themes.
All tests and QA script pass.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
In current implementation (mostly commented out in this patch)
uses heuristic to guess which strings need decoding from utf-8
to binary representation and doesn't support utf-8 characters
in templates and has problems with utf-8 data from database.
With this changes, Koha perl code always uses utf-8 encoding
correctly. All incomming data from database is allready
correctly marked as utf-8, and decoding of utf8 is required
only from Zebra and XSLT transfers which don't set utf-8 flag
correctly.
For output, standard perl :encoding(utf8) handler is used
so it also removes various "wide character" warnings as side-effect.
Test scenario:
1. make sure that you have utf-8 characters in your biblio
records, patrons, categories etc.
2. try to search records on intranet and opac which contain
utf-8 characters
3. install language which has utf-8 characters, e.g. uk-UA
dpavlin@koha-dev:/srv/koha/misc/translator(bug_6554) $
PERL5LIB=/srv/koha/ perl translate install uk-UA
4. switch language to uk-UA and verify that templates
display correctly
5. test search and Z39.50 search and verify that caracters
are correct
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
I followed the test plan, adding utf-8 characters to library names,
patron categories, titles, and authorized values. I tried the uk-UA
translation and everything looked good.
When performing Z39.50 searches for titles containing utf-8 characters I
got results which were still occasionally contaminated with dummy
characters [?] but I assume this is Z39.50's fault not the patch's.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Already signed, add mine.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
The two holdings tabs displayed whether
or not there is anything to go in them.
Signed-off-by: Corinne Bulac <corinne.hayet@bulac.fr>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
If one item list is empty, no empty tab is shown.
All tests and QA script pass.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Removed NoZebra vestiges. This comprises several code blocks that depend on the NoZebra syspref and NZ related functions/methods.
C4::Biblio->
GetNoZebraIndexes
_DelBiblioNoZebra
_AddBiblioNoZebra
C4::Search->
NZgetRecords
NZanalyse
NZoperatorAND
NZoperatorOR
NZoperatorNOT
NZorder
C4::Installer->
set_indexing_engine
Sponsored-by: Universidad Nacional de Córdoba
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This patch corrects permission on the export option available on
catalogue pages in the staff client (detail.pl, MARCdetail.pl, etc) so
that users no longer require "export_catalogue" permission.
"export_catalogue" permission is required only for tools/export.pl.
This patch also corrects some crazy nearby indentation. Sorry, couldn't
resist.
To test, visit a page like detail.pl with and without "export_catalogue"
permission. It should be possible to save the record as MODS, MARCXML,
MARC, etc. without error.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This problem happens because there isn't a operator "phr" in the values
of callnumber and standard number search. So many results aren't the
corrects ones.
Test plan:
- Apply the patch
- In the dropbox search menu of OPAC main page header, the callnum
should have only callnum
- In OPAC advanced search the callnumber and standard number options
shouldn't have "phr"
- In staff client advanced search the callnumber and standard number
options shouldn't have "phr"
- Change OPACNumbersPreferPhrase and IntranetNumbersPreferPhrase to "use"
- The options listed before should use now the operator "phr"
- This will resolve the problems with the searches of callnumbers and
standard numbers in OPAC and staff client (spaces problems, no
results, inconsistent results, etc...)
Sponsored-by: KEEP SOLUTIONS
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
I don't know how to reproduce the searching problems described in the
bug, but I can confirm that the patch works correctly to enable/disable
the use of 'phr' in the searches described in the test plan.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
System preferences work as described, switching indexes in
OPAC and staff.
All tests and QA script pass.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Signed-off-by: Liz Rea <liz@catalyst.net.nz>
fixes qa concerns, feature still works
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Test Plan:
1) Apply patch
2) Create a record
3) Create an item for the record
3) Place a hold on the bib
4) Attempt to 'Delete all items', you should recieve
an error message stating to delete all holds before
deleting all items.
Also, it is possible to get into a situation where a record has
holds but no items. In this situation, it is not possible to
view/delete the holds without adding an item back to the record.
In this case, attempting to delete the bib causes a warning, but
does not prevent deletion.
Signed-off-by: Liz Rea <liz@catalyst.net.nz>
Passes tests - do note that it was a design decision to leave the delete links clickable even though they are grey.
The reasoning is that librarians will want to be able to know *why* they cannot delete a given item or bib - I like this.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This patch removes the superflous code related to 'publictype' which
is a key set for item hashes in some perl files. This key is never
used or stored.
Test Plan:
1) Apply patch
2) Test catalogue/detail.pl, opac/opac-detail.pl and opac/opac-user.pl
3) You should not see any changes in behavior
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
1/ It's better to set style of the video marked in a css file.
2/ Replace some
for my $i in (0..#$array)
with
for my $element in (@array)
3/ the routine in a pm returns a hash not the $template variable
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This enhancement uses information from MARC field 856 to generate the appropriate HTML5 code to embed am media player for the file(s) in a tab in the OPAC and staff client detail view. This patch supports the HTML5 <audio> and <video> element. Additionally it gives basic support for the <track> element. This element is not supported very well by recent browsers. Please consider the patch working when you get working video or audio.
Rebased to Master 22.11.2012
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
All tests and perlcritic pass.
Tests:
Database update
- OK, system preferences were added correctly
- Version number of updatedatabase was only XXX, changed to 3.11.00.XX
OPAC
1) Detail page
- OK, no visible change when OpacSeparateHoldings is turned off
- OK, switching OpacSeparateHoldingsBranch works correctly
- OK, shelf browser opens in correct tab
- OK, only one tab shows when logged out
INTRANET
2) Detail page
- OK, no visible change when SeparateHoldings is turned off
- Number of items is missing on top of the tabs
Notes:
- database update doesn't include bug number
- other holdings tab does show when there are 0 items at other branches,
it could be hidden in those cases
- if there are over 50 items in the holdings or Other holdings tab, the
warning and link 'This record has many physical items. Click here
to view them all.' is only shown for the first tab.
- closing the shelf browser on the second tab goes back to first tab
- number ofitems is missing on top of the tabs
- there are lots of indentation changes in the second patch,
this makes it very hard to see the changes, please provide separate
patches in the future
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
The 2 sysprefs are SeparateHoldingsBranch and OpacSeparateHoldingsBranch
and permit to chose between home branch and holding branch.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Two tabs: "<branch> holdings" / "Other holdings"
"<branch> holdings" tab contains items whose homebranch is the current branch.
"Other holdings" tab contains all other items.
If current branch is not set (connected with mysql user or not logged in
(opac)), the display is unchanged (1 tab "Holdings")
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
My proposed solution eliminates the special print view
page altogether and has the Print button trigger the
browser's print function. I've tweaked the print stylesheet
to improve the output.
Normally I don't think print buttons in the interface
are necessary, since a user could be expected to be able
to print the page using browser controls. But I think it's
best not to remove the button when people are used to seeing
it.
The behavior people will find now is different when clicking
the button from different catalogue pages. A user on the MARC
detail page, instead of getting the generic print view will
get a print of the page they're on. Overall I think this
is more in line with what a user would expect.
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
If a subscription is no longer enough published (or we are not waiting
for a new periodical) we are allowed to close it.
If a subscription is closed, we are not able to receive or generate a
new serial.
On the serial module, we can now
- close a subscriptionn
- reopen a closed subscription
On serial search 2 tabs is displayed (opened and closed subscriptions).
This patch adds:
- a new field subscription.closed in DB
- a new status for serials (8 = stopped)
Test plan:
- search subscriptions
- close a subscription and check that you cannot receive or generate a
new serial
- launch another search and check that the closed serial is into the "closed"
tab.
- You are allowed to reopen a subscription on the subscription detail
page and on the subscription result page. A javascript alert ask you
if are certain to do this operation.
- Check the serial status "stopped" everywhere the status is
displayed (catalogue/detail.pl, serials/claims.pl,
serials/serial-issues-full.pl, serials/serials-collection.pl,
serials/serials-edit.pl, serials/serials-recieve.pl,
serials/subscription-detail.pl and opac-full-serial-issues.pl)
- The report statistics does not include the closed subscriptions if you
don't check the "Include expired subscriptions" checkbox.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 8782: Followup: add some minor modifications
- Show 'closed' information in biblio detail page
- Add a column in serials report table
- Search subscriptions on title words instead of string
- Prevent serials editing when subscription is closed
- Don't change status of "disabled" serials
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 8782 - Close a subscription - Followup - Fix updatedatabase.pl
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
In opac-search.pl and search.pl, this patch moves the $lang variable from the end to the begining of the script, and use it as a parameter for getAllLanguages.
In Languages.pm, getAllLanguages function is modified :
- if no parameter is passed to the function, it returns english languages names
- if a $lang parameter conforming to RFC4646 syntax is passed :
-- the function returns languages names translated in $lang if possible
-- if a language name is not translated in $lang in database, the function returns english language name
To test, set your opac and staff interface in english and in other languages and check search.pl and opac-search.pl :
- If language names in your languages_description table are translated in the same language you use for your GUI, the language names in dropdown list will be translated in this language (+native name).
- If your GUI is in english, or in a language into whitch languages names are not translated in languages_description, the dropdown list will stay in english (+native name).
Signed-off-by: Marc Veron <veron@veron.ch>
Patch behaves as expected.
With Opac language set to French I got all languages with French language name.
With German (de-DE), I got only a few with German language names (and all other with English ones),
this was due to missing entries for de-DE in table language_descriptions.
This behaviour is consistent with the description above.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Tested language list in OPAC and staff advanced search is translated
properly after applying the patch. Checked that language switcher still
works like it should.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Fixed typo in POD.
Simplifies template (eliminating intranet-bottom include).
Makes encoding for card view more consistent with approach in Templates module.
Rearranges a few lines in script for consistency and performance.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Passed-QA-by: Mason James <mtj@kohaaloha.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Changed "$item->{'materials'} ne ''" to
"defined($item->{'materials'}) && $item->{'materials'} =~ /\S/"
in if condition to prevent error when it is NULL, and to
properly capture the intent of printing if there is something
visible.
Cases tested include NULL, '0', '', ' ', and 'blah' by using
UPDATE items SET materials=NULL where biblionumber=19158;
where the biblionumber was chosen randomly, because only NULL
was in the items.materials field. The NULL case triggers an
error, but it does display correctly.
The ' ' case displays an apparently empty column, which does not
seem to be the intent of the flag that is being set. This is why
a simple $var check is not sufficient.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Adds librariannote (staff subscription history note) and missing list to the normal catalogue detail view in staff client.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
- New pages:
- invoices.pl: allow to search in invoices on several criteria
- invoice.pl: permit to view and modify invoice details
- shipment date
- billing date
- shipment cost and budget used for shipment cost
Invoice informations are now stored in their own sql table and aqorders
have a link to it
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Changes the subscription note from the opac "notes" to the proper staff client "internalnotes" field.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
This change some code a bit strange, that generate strange effetcs.
Now we use $cgi->param to get the values.
Test: search at the opac and intranet using limit, etc.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This patch does the following:
1) Enables fallback for includes between different themes and different
languages (with the exact same precedence as for .tt files)
2) Enable fallback for XSLT files between different themes and different
languages (again, same precedence)
3) Change the semantics of the TT [% themelang %] variable so that it always
refers to the preferred theme and language, rather than the fallback
theme/language. As a result, all themes must include all javascript,
css and image resources they use.
Note that these changes actually have no impact whatsoever on an
installation where the default (prog) themes are in use.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Mason James <mtj@kohaaloha.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
This patch removes the AmazonReviews and AmazonSimilarItems
features from the OPAC and staff client. With on Amazon
feature remaining, cover images, the *AmazonEnabled preference
is also removed in favor of checking the *AmazonCoverImages
preference. Two other system preferences, AWSAccessKeyID and
AWSPrivateKey are removed as they were required only by the
removed features.
Handling of book cover images from Amazon is unchanged.
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
Turned on amazon covers in opac and staff client and all
worked as expected. Then tested to make sure other cover image
services still worked and they do.
Signing off.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
At the moment, local cover images cannot be cached by the web browser
or any intermediate reverse proxies. This results in an unnecessary
load on the server, and is entirely unnecessary.
Signed-off-by: Dobrica Pavlinusic <dpavlin@rot13.org>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
The biblio/items detail pages (staff and OPAC) display
the copynumber description if an authorized value
is configured accordingly.
Signed-off-by: Gaetan Boisson <gaetan.boisson@biblibre.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
This is for MARC 21 only.
Made following changed:
- In getFacets in C4/Koha.pm added item type facet for 952y and 942c
- In getRecords in C4:Search.pm added code to get description of itemtype codes
- facets.inc in both staff and opac to show item types related label in the facets block
To test:
Add records such that a certain itype (say BK) is present in both 942c and 952y in two DIFFERENT records.
Run a search where both test records are present. Test to see if itype types are presented in the facets block (both OPAC and staff).
Click on the itype (say BK), both the test records should appear in the refined results. This shows that the feature works for both 942c and 952y.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Ian Walls <koha.sekjal@gmail.com>
QA Comment: fixed capitalization in template includes according to HTML4 coding
guideline ("Item types" instead of "ItemTypes")
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
- in various acquisition pages and serials home
- in database : biblioitems.ean
- adds ean and its mapping in default english bibliographic framework
- adds ean mapping in default french bibliographic framework
- ean search is not enabled for MARC21
The required mapping between the ean marc field and the biblioitems.ean
database field will be automatically added on an existing unimarc installation.
However, if you already have records with ean, you will have to
run misc/batchRebuildBiblioTables.pl to populate biblioitems.ean
Signed-off-by: jmbroust <jean-manuel.broust@univ-lyon2.fr>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Passed QA at second run. Removed a merge marker only.
If AcqCreateItem=ordering, when you receive an order, you now have a
list of all created items and checkboxes that permit you to choose which
items you want to receive.
A 'Edit' link open additem.pl page in a popup to allow you edit the
items before receiving them (popup is automatically closed after
modification, and items table is automatically updated)
If quantity is set manually in the text box, the appropriate number of
checkbox are checked from top to bottom and a warning shows up if
quantity is greater than order quantity
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Patch implements HidePatronName system preference for 'Checkout status'
on moredetail (tab items from staff detail page).
Also adds some new 'if' statements, so 'Serial enumeration' and 'Paid for?' are
only shown when they are not empty.
Silences warns in the logs.
To test:
- Toggle system preference for an issued item and check name/cardnumber
are displayed correctly.
- Check serial enumeration and Paid for? show when not empty.
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Marijana Glavica <mglavica@ffzg.hr>
I am signing it off because it doesn't break anything and I will report
another bug for language issues described in my previous comment.
Removed MySQLism backquotes
This lays the foundation for further changes for report 7310.
Implements following points from the wiki page List permissions:
1) Preference that controls if users may create public lists in opac.
2) New add/delete own/delete other permissions per list.
Code has been changed (in some cases refactored). New permissions are not yet visible; with this patch current functionality is kept as much as possible while resolving several issues, improving permissions and extending the code for further developments (using the new permissions and sharing lists).
Feb 23, 2012 (revision): Changed defaults for new lists. Could also remove routine GetRecentShelves by using GetSomeShelfNames in catalogue/search.pl just as opac-search.pl already did. (More consistent.)
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Feb 29, 2012: Automerge version.
March 5, 2012: Rebase for pushed 4912 patch.
March 21, 2012: Rebased. Resolving some conflicts in relation to pushed report 7719.
- Adds order date above vendor
- Reordered fields to reflect history of the item
- Order information (order date, vendor) is only shown, when an order exists
- Accession date is only linked, when item was received in acquisition
- Links to basket and invoice are only shown when user has the correct permission
- order date: manage_order
- accession date: receive_shipment for invoice
- Changes all dates to use the KohaDates TT plugin
- Corrects display of rental price, removing additional zeros
To test:
1) Create a record with
- 1 item created in cataloguing
- 1 item ordered
- 1 item ordered and received
- 1 item checked out
2) Verify the correct information is shown for each
3) Verify links on the dates work correctly
4) Toggle permissions for the user
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
Followed the test plan and all tests pass.
Signed-off-by: Marijana Glavica <mglavica@ffzg.hr>
changed supplierid to booksellerid
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
This adds a new syspref: AllowPKIAuth. It can have one of three states:
* None
* Common Name
* emailAddress
If a) this is set to something that's not "None", and b) the webserver
is passing SSL client cert details on to Koha, then the relevant field
in the user's certificate will be matched up against the field in the
database and they will be automatically logged in. This is used as a
secure form of single sign-on in some organisations.
The "Common Name" field is matched up against the userid, while
"emailAddress" is matched against the primary email.
This is an example of what might go in the Apache configuration for the
virtual host:
#SSLVerifyClient require # only allow PKI authentication
SSLVerifyClient optional
SSLVerifyDepth 2
SSLCACertificateFile /etc/apache2/ssl/test/ca.crt
SSLOptions +StdEnvVars
The last line ensures that the required details are
passed to Koha.
To test the PKI authentication, use the following curl command:
curl -k --cert client.crt --key client.key https://URL/
(look through the output to find the "Welcome," line to indicate that a user
has been authenticated or the "Log in to Your Account" to indicate that a
user has not been authenticated)
To create the certificates needed for the above command, the following series
of commands will work:
# Create the CA Key and Certificate for signing Client Certs
openssl genrsa -des3 -out ca.key 4096
openssl req -new -x509 -days 365 -key ca.key -out ca.crt
# This is the ca.crt file that the Apache config needs to know about,
# so put the file at /etc/apache2/ssl/test/ca.crt
# Create the Server Key, CSR, and Certificate
openssl genrsa -des3 -out server.key 1024
openssl req -new -key server.key -out server.csr
# We're self signing our own server cert here. This is a no-no in
# production.
openssl x509 -req -days 365 -in server.csr -CA ca.crt -CAkey ca.key \
-set_serial 01 -out server.crt
# Create the Client Key and CSR
openssl genrsa -des3 -out client.key 1024
openssl req -new -key client.key -out client.csr
# Sign the client certificate with our CA cert. Unlike signing our own
# server cert, this is what we want to do.
openssl x509 -req -days 365 -in client.csr -CA ca.crt -CAkey ca.key \
-set_serial 02 -out client.crt
openssl pkcs12 -export -in client.crt -inkey client.key -out client.p12
# In theory we can install this client.p12 file in Firefox or Chrome, but
# the exact steps for doing so are unclear, and outside the scope of this
# patch
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Tested with Common Name and E-mail authentication, as well as with PKI
authentication disabled. Regular logins continue to work in all cases when
SSL authentication is set to optional on the server.
Signed-off-by: Ian Walls <koha.sekjal@gmail.com>
QA comment: synchronized updatedatabase.pl version of syspref with sysprefs.sql
version, to avoid divergent databases between new and upgrading users.
