Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Wrong line ending in JSON causes error:
Uncaught SyntaxError: missing } after property list
note: { opened at line 29579, column 15
To test:
1 - Have a title with some items not for hold in staff interface
2 - Set AllowHoldPolicyOverride to 'Allow'
3 - Attempt to place hold on the title
4 - Note JS error in the console and datatable does not load for items
5 - Apply patch
6 - Reload
7 - Error is cleared, table loads correctly
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
- Remove the unordered list added to the holds list Details column
- Switch div to span to have the hint appear behind the checkbox
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch
* sets one check for reserves and another for old_reserves in
atomic update
* Adds a message below the checkbox and adds detail when a hold is non
priority
* Fixes issue when there are more than one hold, but the first is non
priority
* Adds test case for this last scenario
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch implements necesary code to implement non priority feature
To test:
1) Apply all patches.
2) Run updatedatabase.
3) Checkout a specific item for patron1.
4) Place a hold on the same item for patron2 (do not check non priority
hold checkbox).
5) Try to renew the item for patron1.
CHECK => in checkouts table, there is a message that the item could not
be renewed because there was a hold.
6) Cleanup all checkouts and holds.
7) repeat steps 3 to 5, but this time check the non priority checkbox.
SUCCESS => item was renewed
8) prove t/db_dependent/Holds.t
Signed-off-by: Lisette Scheer <lisettes@latahlibrary.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Some libraries would like to be able to cancel a hold with the option to
specify a reason. Providing a reason would generate an email to that
patron.
Test Plan:
1) Apply this patch
2) Run updatedatabase.pl
3) Restart all the things!
4) Create new AV category "HOLD_CANCELLATION", add some cancelation reasons
5) Add new Holds module notice "HOLD_CANCELLATION", add an email version.
A quick test version would be "Reason: <<reserves.cancellation_reason>>"
--
[% USE AuthorisedValues %]
Reason: [% AuthorisedValues.GetByCode( 'CANCELLATION_REASON', hold.cancellation_reason, 'IS_OPAC' ) %]
[% IF hold.cancellation_reason == "MY_AV_VALUE" %]
IF perhaps you'd like to have a much longer explanation than just the
one sentence in the AV description, you can use IF blocks using Template
Toolkit markup!
[% END %]
--
6) Place a hold for a patron
7) On request.pl, select the 'del' option for the hold
8) Select a cancellation reason and choose "Update hold(s)"
9) Note a new message has been queue for the patron with the cancelation reason
11) Test again from circulation.pl
12) Test again from moremember.pl
10) Cancel a hold with no reason, note no email is generated
11) Delete your authorised values, not the feature is disabled
12) Reinstate the authorised values, but delete the notice,
you should now be able to cancel a hold with a reason,
but no email will be generated
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Rebecca Coert <rcoert@arlingtonva.us>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds a floating toolbar to the holds summary page in the staff
interface.
To test, apply the patch and view the holds page for a title with
multiple holds on it. Test that when you scroll down past the position
of the "Update hold(s)" button, the toolbar "sticks" to the top of the
screen.
Test that holds are updated correctly after clicking the "Update
hold(s)" button.
Signed-off-by: Emmi Takkinen <emmi.takkinen@outlook.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch makes minor changes to the markup of the holds list to make
the page hierarchy clearer when holds are grouped by branch and
itemtype.
Test plan:
- Enable the AllowHoldItemTypeSelection system preference.
- Locate a record in the catalog and place multiple holds:
- Holds at different branches
- Holds with different itemtypes selected
- View the holds page with various values of the HoldsSplitQueue
preference enabled:
- nothing
- pickup library
- hold itemtype
- pickup library & itemtype
In each case verify that the interface works well.
Signed-off-by: Christopher Brannon <cbrannon@cdalibrary.org>
Signed-off-by: Emmi Takkinen <emmi.takkinen@outlook.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
By adding an id the checkbox is selected when the label is clicked
enhancing usability.
Also adds a colon : to the label.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds a checkbox to make holds created by club hold to default to patron's home branch if possible.
To test:
1. Apply this patch
2. Create a club, and add two patrons (from now on called patron A and patron B) to it, each one form a different library..
3. Create a hold for the club, and in the details set pickup location different from any of the patrons.
4. Check "Pickup at patron's home library when possible" checkbox
SUCCESS => when submitted, pickup location of holds defaults to patron's home branch
5. Modify patron A's library and set pickup location to no.
6. Repeat steps 3 and 4.
SUCCESS => when submitted, patron A's hold now points to pickup location setted on step 3, and patron B's hold still points to his home branch.
7. Sign off
Sponsored-by: Southeast Kansas Library - SEKLS
Signed-off-by: Jason Robb <jrobb@sekls.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
We are preparing the ground with this patch. As the "Columns settings"
page will now add the ability to modify settings for the whole table, it
makes sense to rename the file and the variables.
Note that the controller script (admin/columns_settings.pl) and the yml
(admin/columns_settings.yml) files have not been moved to not break
shortcuts and abits people could have. But if QA decides, it could be
easy to do.
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Alex Arnaud <alex.arnaud@biblibre.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
There was a bug, on the biblio's hold list view, if the pickup library
was changed, the next screen was "place a hold for no title"
http://pro.kohadev.org/cgi-bin/koha/reserve/request.pl?multi_hold=1&biblionumbers=
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
If a hold is selected from the result list, we should let the ability to
select an item-level hold.
Test plan:
I. Detail page
1/ Go to a bibliographic record detail page
2/ Click "Place hold"
3/ Select a patron
=> No change expected, you can select an item
II. Search result, multiple holds
1/ Search for an item with more than one search result
2/ Select several items, click 'Place hold'
3/ Enter a patron card number
=> No change expected, item level holds are not available.
III. Search result, single hold
1/ Search for an item with more than one search result
2/ Select only one item, click 'Place hold'
3/ Enter a patron card number
=> With this patch applied, item level hold is available. The screen is the same
as when you place a hold from the bibliographic record detail page
=> Without this patch you cannot place an item-level hold
QA notes: We could go a bit further and remove the 2 biblionumbers and
biblionumber from hold script, as well as remove the checkMultiHold in
request.tt. We should not have a biblionumbers param that contain a list
of biblionumber separated by '/' but several biblionumber parameters
instead.
QA notes 2: About placerequest.pl, see bug 19618 comment 27.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
When placing a hold in the staff interface, the heading on the
search box reads: Search Patrons or clubs
The patch changes it to be Search patrons... instead.
Also changes club id to club ID.
To test:
- Place a hold in the staff interface
- Verify the capitalization error
- Switch tabs to Clubs, see: club id
- Apply patch
- Verify it's all good now
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Additional test plan:
Create 3 clubs: abc adf axy
place a hold for on of those club, search for a club 'a'
you will get the focus on the "Clubs" tab
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This alternate patch tries to implement a fix in a more "correct" way by
tying the cursor focus to the initialization of the jQueryUI tabs. By
configuring both the "create" and "activate" events we can make sure the
correct input field is focused.
I think the only advantage of this patch over the other one is that
tying the focus to the tabs activation makes it a little more obvious
where in the DOM loading sequence the focus is being set.
To test, follow the original patch's test plan:
TEST PLAN:
1. Go to Biblio Record
2. Place Hold (request.pl) - either the Hold above the Bib or the Hold
on the left, it does the same thing.
3. Note that the cursor does not go to Patron Name (for whom to place
the hold for), it goes to the Top Search bar under Checkout.
4. Apply patch and reload the page.
5. The focus should now be correctly set.
6. Toggle between 'Patrons' and 'Club' tabs.
7. Focus should stay set.
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kelly McElligott <kelly@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch updates some markup and CSS so that the process of selecting
a club from search results during the hold process looks the same as
when selecting a patron: Club names should be links (like patron
names are) and the table row should have a hover color to help indicate
that it is clickable.
This patch also changes the markup of the Patrons/Clubs tabs a little
bit to make the information clearer: Superfluous Bootstrap-related tab
markup has been removed, and the patron and club search results have
been moved into their respective tab containers. This means that if you
search for a patron but then switch to the clubs tab the patron list
doesn't still display.
To test, apply the patch and rebuild the staff client CSS
(https://wiki.koha-community.org/wiki/Working_with_SCSS_in_the_OPAC_and_staff_client)
- You should have more than one patron club defined.
- Begin the process of placing a hold on a title.
- Test the process of searching for both patrons and clubs.
- In each case the name (patron or club) should be an active link.
- Hovering your mouse over the table rows should change the row
background to yellow.
- Clicking the other tab at this stage should hide the search results
from your last search.
- Whether you click the linked name or elsewhere in the table row
you should be correctly redirected to the next step in the holds
process.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Test plan:
Use quotes in a library's name, then place an item on hold for a patron
that cannot do it.
If you are allowed to overwrite this restriction you will get a warning:
"This item normally cannot be put on hold except for patrons from
BRANCHNAME"
The library's name should be correcty displayed
Signed-off-by: Hayley Mapley <hayleymapley@catalyst.net.nz>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Bug 19618 replaces the call to placerequest.pl with a REST API /holds
That is wrong as it does not support multi holds.
Test plan:
Confirm that prior to this patch you are not able to place a hold on
several records at once, and that this patch fixes it
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Agustin Moyano <agustinmoyano@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Same as bug 22021 for the withdrawn status.
1. Withdraw an item
2. Place an hold on this item
Notice the new "withdrawn" status in the information column
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This follow-up adds the correct markup to the second of two "Place hold"
buttons so that it is disabled when the first is disabled.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
The patch modifies the markup and CSS related to the holds template in
the staff client when holds policy override is necessary. The CSS
background image is replaced with a Font Awesome icon. <input>s are
replaced with <button>s to allow for the icon markup.
To test, apply the patch and regenerate the staff client CSS
(https://wiki.koha-community.org/wiki/Working_with_SCSS_in_the_OPAC_and_staff_client).
- Enable the AllowHoldPolicyOverride system preference.
- Start the process of placing a hold for a patron on a title which
would not normally be available for hold. For instance: The patron
already has too many holds.
- On the hold confirmation screen the "Place hold" buttons should
appear with a little yellow "warning" icon.
- Clicking either of the two "Place hold" buttons should trigger a
confirmation dialog. Test both the "Confirm" and "Cancel" options.
Signed-off-by: Maryse Simard <maryse.simard@inlibro.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch adds a new message to 'Hold' column in 'Place a hold on a specific item' table.
The message is "Cannot place hold from patrons's library". It appears when patron's homebranch is not in item's hold group, and hold_fulfillment_policy is set to 'holdgroup'.
This patch also adds a new column "Allowed pickup locations" that lists allowed pickup locations per item.
Finally, the select that displays pickup locations is filtered by allowed pickup locations, when multi_hold is not enabled
To test:
1) Apply this patch
2) In library groups add a root group and check it as hold group.
3) Add two libraries to the group
4) In circulation and fines rules, in 'Default checkout, hold and return policy', in Hold policy change the value to 'From local hold group'
5) Search a patron from a different library than step 3, select one and click 'search to hold'
6) Search by location for items in any library of step 3
7) On any item, clic on 'Place hold for ...'
SUCCESS => when the page is loaded, in the 'Place a hold on a specific item', you should see the message "Cannot place hold from patrons's library" in 'Hold' column
=> You should see a new column called "Allowed pickup locations" and the message is "Any library"
8) In circulation and fines rules, in 'Default checkout, hold and return policy', in 'Hold policy' change the value again to 'From any library' and change 'Hold pickup library match' to "Item's hold group"
8) Repeat steps 5 to 7
SUCCESS => when the page is loaded, you should see the "Pickup at" select filtered by libraries in hold group
=> You should see in "Allowed pickup locations" a coma separated list of the libraries in item's hold group
=> If biblio has an item whose control branch is not in a hold group, you should see the control branch name in "Allowed pickup locations"
9) Sign off
Sponsored-by: VOKAL
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Just a find and replace on the changed system preference name.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
- Rename CircAutocompl system preference to PatronAutocompletion
- Take this system preference into consideration for patron search
Signed-off-by: Séverine QUEUNE <severine.queune@bulac.fr>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch effectively uses API to place holds for patrons. It adds a listener on submit event of the form in javascript, where it calls holds API.
To test:
1. Place a hold on any biblio for a patron
SUCCESS => hold is placed or rejected, but no blank page with JSON error is shown.
2. Place a multi hold for any patron
SUCCESS => holds are placed or rejected, but no blank page with JSON error is shown.
3. Sign off
Signed-off-by: Lisette Scheer <lisetteslatah@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch adds an endpoint in thi api in /api/v1/clubs/{club_id}/holds whith the verb POST that maps to Koha::REST::V1::Clubs::Holds#add controller.
Classes for club_holds and club_holds_to_patron_holds new tables where also added.
To test:
1) Reach SUCCESS.3 test point of previous patch with club that has no enrollments
2) Click on "Place Hold"
SUCCESS => an alert should appear that you cannot place hold on a club without patrons
3) Reach SUCCESS.3 test point of previous patch with club that has enrollments
4) Click on "Place Hold"
SUCCESS => holds priority list should appear with holds for every patron in club
5) Repeat steps 3 and 4.
SUCCESS => new holds should appear in different order
6) Sign off
Sponsored-by: Southeast Kansas Library - SEKLS
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch adds the ability to place a hold for each member of a club in random order.
To test:
1) apply this patch
2) create 2 clubs, (club names should have some part in common, and some part different for each other)
3) in one of them add at least 6 members
4) enter patron clubs management and click on "Actions" button
SUCCESS.1 => club with members has a new action called "search to hold"
5) click on search to hold
SUCCESS.2 => in the list of bilios there appears an action called "Place hold for <club name>"
6) click on "Place hold for <club name>"
SUCCESS.3 => a new window appears where you can select pickup location (defaults to club's library, if any), and the list of members.
7) go back to the list of bilios in the catalog and click on "Forget <club name>"
8) click on "Holds" action of any biblio
SUCCESS.4 => a search box appears with two tabs: Patrons and Clubs
9) click on Clubs tab and search by the common part of clubs names
SUCCESS.5 => a list of clubs that matches the search appears. If you click on any of them, the same page as SUCCESS.3 appears.
10) go back to the search box in SUCCESS.4 and search by the different part of the name.
SUCCESS.6 => because there is only one club that matches search criteria, the same page as SUCCESS.3 appears;
11) Sign off
Sponsored-by: Southeast Kansas Library - SEKLS
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch adds a few comments to the markup in order to highlight the
structure of the page.
Signed-off-by: Maryse Simard <maryse.simard@inlibro.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch reindents reserve/request.tt to use four spaces and
to eliminate tabs, following coding guidelines. Trailing white space has
been removed.
To test, apply the patch and use your preferred method for checking the
differences between files while ignoring whitespace. I use diff with the
"-w" flag, but I'm no diffctator.
Test the process of placing a hold in the staff client: A single hold,
multiple holds, etc. Everything should work correctly.
Signed-off-by: Maryse Simard <maryse.simard@inlibro.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch removes the "onsubmit" attribute from the place hold form.
To test, apply the patch and test placing a hold:
Begin the process of placing a hold on a single title. On the
place hold screen, uncheck the "Hold next available item" checkbox and
click the "Place hold" button.
You should be get an alert saying "Please select an item to place a
hold." Select an item and click the "Place hold" button again. The hold
should be placed.
This patch affects the form validation for placing multiple holds, but I
don't think the JavaScript ever has a chance to run: The template blocks
the user from placing multiple holds if one of the titles has no items.
Signed-off-by: Maryse Simard <maryse.simard@inlibro.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
My orginal patch for this bug contained a lot of changes made obsolete
by Bug 19469, which created holds_table.inc.
This new version makes one minor change only to request.tt, adding a
class name and removing an onclick attribute.
To test, apply the patch and place an item-level hold on a title.
Start the process of placing another hold on that item. On the "place
hold" screen, in the table of items, you should see a "Cancel hold" link
for the item you previously placed on hold.
- Click the "Cancel hold" link
- Clicking "Cancel" in the confirmation dialog should cancel the
operation.
- Clicking "OK" should cancel the hold.
Signed-off-by: Maryse Simard <maryse.simard@inlibro.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Unify and clean up subtitle usage so that it's always used as a simple array and not the old hash structure.
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch is a bit of a clean-up to bring the item status display
more in line with the display on the detail page:
- show descrpition of authorised value for not for loan instead of hardcoded text
- Show description of authorised value for lost instead of hardcoded text
This is also a translatability fix, as the text came from the .pl
- Show description of authorised value damaged instead of hardcoded text
- Make sequence of status match display on details page:
lost - damaged - not for loan
To test:
- On a record with multiple items
- Add different status to the items
damaged, lost, not for loan
- Make sure you have items with one status and multiple status at the same time
- Look at how the status display on the detail page
- Place a hold, compare display
- Apply patch
- Repeat
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Test plan:
1) Enable the CheckPrevCheckout and DisplayMultiPlaceHold system preferences
2) Have a patron with some checkouts history
3) Try to place hold on one of titles from history for this patron
4) You should see an information at the top of confirm request page, but
you still should be able to place a hold
5) Try this with multiple titles - one or more of them should be from
history
6) You should see this information in "Information" column
7) There is also new column placed at the beggining with checkbox, you
could uncheck it for titles you do not want to place a hold on it
8) Confirm the hold is placed only on checked titles
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Bin Wen <bin.wen@inlibro.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch corrects a missing id on the holds_to_place field and adds code to disable the box when an item is checked
Additionally script login now places a single hold if an itemnumebr is passed and checks for holdability of the specific item
To test:
1 - Allow multiple holds per record in circ rules
2 - In staff client, go to place a hold on a record
3 - Select a patron
4 - Increase the number of holds
5 - Then select a specific item to hold
6 - Patron now has multiple holds on a single item
7 - Apply patch
8 - Repeat, notice that count is disabled when item checked
9 - Confirm count is enabled when 'Hold next available item' is checked
10 - Set number to more than 1
11 - Check an item and submit
12 - Confirm only one item is reserved
13 - Hit the script directly (with valid info):
http://localhost:8081/cgi-bin/koha/reserve/placerequest.pl?biblionumber=1&checkitem=1&holds_to_place_count=2&borrowernumber=5
14 - Confirm only one hold is placed
15 - Confirm multiple hits of the url do not generate further holds
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch makes a few markup corrections to the holds template in the
staff client: Replace some YUI markup with Bootstrap; Replace invalid
"alt" attributes with "title."
To test, apply the patch and test the process of placing a hold, both
single and multiple holds. At each step of the process the page should
look correct and adjust well at various browser widths.
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Branch transfer limits are respected for placing holds in the OPAC but nowhere else. This should be remedied.
Test Plan:
1) Set up a branch transfer limit from Library A to Library B
2) Verify you cannot set up a hold for an item from Library A for pickup at Library B from the staff interface ( without overriding )
3) Verify you cannot place that hold via ILS-DI
4) Verify you cannot place that hold via SIP
4) Verify a forced hold from Library A to Library B will not show up in the holds queue
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch adds columns configuration to the holds request page to fix a
JavaScript error in the console and to allow the patron search results
table to be enabled as a DataTable.
To reproduce: Place a hold on a title in the staff client. When prompted
for a patron, perform a search which will return multiple results. The
patron search results will appear in an unsortable table. A JS error can
be seen in the browser console.
To test, apply the patch and repeat the steps above. The patron search
results table should be sortable and there should be no JS error.
Signed-off-by: Pierre-Marc Thibault <pierre-marc.thibault@inLibro.com>
Signed-off-by: Bin Wen <bin.wen@inlibro.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Lucas Gass
Nick Clemens
Katrin Fischer
Agustin Moyano
Kyle Hall
Owen Leonard
Jonathan Druart
Matthias Meusburger
Josef Moravec
Ere Maijala