Change to GetReservesFromBiblionumber() had effect
of causing all requests of constrainttype other
than 'o' to not be included in result.
while ($foo) {
$bar or next;
# do stuff
# do other stuff
}
is not equivalent to
while ($foo) {
if ($bar) {
# do stuff
}
# do other stuff
}
Signed-off-by: Galen Charlton <galen.charlton@liblime.com>
This corresponds with the test I submitted earlier and essentially
overrides the partial improvement from Nighswonger under Bug 2500.
Signed-off-by: Galen Charlton <galen.charlton@liblime.com>
This patch check that an item is not "Waiting" before do something in GetOtherReserves(because is the item is waiting, we don't need to do something).
Signed-off-by: Galen Charlton <galen.charlton@liblime.com>
branchoverdues.pl
~ Removed unused variables.
~ Use elsif where applicable.
~ Added many FIXMEs.
~ Added help description.
~ Changed link to more accurate description.
~ REFACTORED branchoverdues-specific function in C4 for obvious consolidation.
This report is still of questionable value, since it's dataset has such strange
hardcoded limitations. It is not clear that "FU" type fines and notifys=0 are
reliable or useful indicators to query on, in hardcoded form.
Signed-off-by: Galen Charlton <galen.charlton@liblime.com>
Allow arguments to be specified in the negative (i.e. 0).
Allow function to be called with no arguments.
This supercedes the patch titled:
Allow GetBranchesLoop to intuit IndependantBranches if not specified in argument.
Signed-off-by: Galen Charlton <galen.charlton@liblime.com>
This patch was not fully tested because the actual behavior intended
by constraints 'o' and 'e' was apparently never implemented here.
But it had no chance of success as with:
my $sth = $dbh->prepare("");
This uses the inteneded query, removes unneeded $sth->finish calls and
fixes *some* redeclaration of my $variables in the same scope, as
would be needed to run under warnings pragma.
Signed-off-by: Galen Charlton <galen.charlton@liblime.com>
This based on a patch by Nahuel ANGELINETTI; done to
merge changes with Mason's patch for 2951. The original
patch description is:
in the previous patch the field used for link "name" was 856$z, but the unimarc doesn't specify this, it say to use the 856$2 fi
This patch make koha to use the 856$2."
Signed-off-by: Galen Charlton <galen.charlton@liblime.com>
This patch make Page.pm to use the getitemtypeinfo function to generate the imageurl, and check (in the template) if an
image is set.
Before this patch, always the "Alt" information was shown, because the url wasn't right.
Signed-off-by: Galen Charlton <galen.charlton@liblime.com>
This patch add a button in "Serial Collection" to add manually the next issue. And improve the function GetNextExpected
to retrieve at least something.
Signed-off-by: Galen Charlton <galen.charlton@liblime.com>
The current regexp used to split fiction call numbers does not handle the '.' char well. This patch corrects the regexp so that it behaves as expected.
This patch should be ported to the 3.0.x branch.
[fbcbug 5]
Signed-off-by: Galen Charlton <galen.charlton@liblime.com>
The OPAC and staff search results page will now display
the library name instead of the library code in the limit
part of the search description, e.g.,
"kw,wrdl: cat branch:Centerville" instead of
"kw,wrdl: cat branch:CPL"
Signed-off-by: Galen Charlton <galen.charlton@liblime.com>
The *_ok methods in ILS.pm were targeting the wrong depth.
This also resolves a longstanding FIXME on to_bool() warning like:
Argument "\x{66}\x{61}..." isn't numeric in numeric ne (!=) at /ILS.pm line 94.
The example_institution_dump.sh essentially provides the proof test case for this patch.
Run it before/after on SIPconfig.xml where "MAIN" has checkout="true" and checkin="true".
Signed-off-by: Galen Charlton <galen.charlton@liblime.com>
This adds an option to the inventory tool causing it to ignore copies
currently on loan. This is good if you want to do inventory, but don't
want to update the date-last-seen on items currently on loan.
Signed-off-by: Galen Charlton <galen.charlton@liblime.com>
The feature in question is described in bug 2952; to
summarize the enhancement, which the earlier patch
description did not do, the list of bibs in an
import record batch now includes a column linking
each import record to the bib that was actually created
or updated when the import batch was committed.
The improvements in this patch are:
* If bib in import batch has not been committed, it
has not been linked to a matching new or updated bib.
In that case, do not create a link to a guaranteed
404 (/cgi-bin/koha/catalogue/detail.pl?biblionumber=)
* When reverting an import batch, set matched_biblionumber
to NULL for affected records - otherwise, the Bib
column will include links to bibs that may no longer
exist.
* Fixed a minor HTML validation error.
Signed-off-by: Galen Charlton <galen.charlton@liblime.com>
Speed up bib search and OPAC bib display, especially
when the XSLT OPAC results and details display sysprefs are
ON, by passing an existing MARC::Record object to three
functions:
C4::Biblio::get_biblio_authorised_values()
C4::XSLT::XSLTParse4Display()
C4::XSLT::transformMARCXML4XSLT (internal)
These functions previously fetched the bib from the
database, incurring the cost of DB retrieval and MARCXML
parsing even though client code already had a
MARC::Record object available.
Signed-off-by: Galen Charlton <galen.charlton@liblime.com>
If a patron has a number of fine transactions, the
total could be wrong. This is particularly noticeable
when a patron has a zero balance, as summing a group
of floating point values derived from decimal(6,2) columns
can result a scalar value that is not zero.
Koha really should be using integral arithmetic
or appropriate accounting modules to do fine and
acquisitions calculations. Using floating point scalars
for monetary amounts is always a mistake.
This patch also prevents an account maintenance
fee from being applied when renewing a patron if the
amount would be 0.
Signed-off-by: Galen Charlton <galen.charlton@liblime.com>
1. rather than testing for notforloan == -1, test for any negative values to set the On order status
2. in cases where itemcallnumber is blank or null, don't display the itemcallnumber brackets []
Signed-off-by: Galen Charlton <galen.charlton@liblime.com>
This patch works with XSL* sysprefs == ON, a future patch will address XSL sysprefs==OFF
Items with notforloan set to a negative number still designate an 'ordered' status
Some items are marked 'not for loan' by setting that value at the item level, others by assigning
that value to that item's itemtype. This patch works for both scenarios.
Specific changes this patch introduces to the OPAC:
* Adds a new OPAC results page key 'Copies available for reference:'
* Changes 'Copies available at:' to 'Copies available for loan:'
* Changes the availability limit label in opac-advsearch from:
'Only items currently available' to 'Only items currently
available for loan or reference
* Displays the authorised value for the specific notforloan value in the OPAC detail page in
parentheses next to 'Not for Loan'
Signed-off-by: Galen Charlton <galen.charlton@liblime.com>
GetMarcFromKohaField returns (0,0) without the $frameworkcode argument.
Note the argument can be "", but it must not be undefined.
Signed-off-by: Galen Charlton <galen.charlton@liblime.com>
In XSLT.pm, put XSLT stylesheet object in a session variable in order
to avoid to build it for each biblio to parse: useful on search
result page.
Signed-off-by: Galen Charlton <galen.charlton@liblime.com>
This changes the setting if default values in the inventory tool where
the min and max call number are concerned. Also changes how the query
is formed in C4/Items so that these two are not required.
Signed-off-by: Galen Charlton <galen.charlton@liblime.com>
When sending circulation alerts, use the branch that the
event happened on instead of $item->{homebranch}.
Signed-off-by: Daniel Sweeney <daniel.sweeney@liblime.com>
Signed-off-by: Galen Charlton <galen.charlton@liblime.com>
- Enqueue the messages with a to_address.
Signed-off-by: Daniel Sweeney <daniel.sweeney@liblime.com>
Signed-off-by: Galen Charlton <galen.charlton@liblime.com>
- fixed cross browser issues. (IE and Safari don't let you say
someobject.class, presumably because "class" is a keyword that's reserved
for future versions of JS. Firefox and Opera allow it.)
- added text to the grid for added clarity.
Signed-off-by: Daniel Sweeney <daniel.sweeney@liblime.com>
Signed-off-by: Galen Charlton <galen.charlton@liblime.com>
- C4::Letters:EnqueueLetter() is aware of new fields in message_queue table
- C4::Circulation::SendCirculationAlert() actually works
- C4::Category cleanup
- C4::ItemType cleanup
- C4::Message is a new module.
It presents yet another way to interact with the message_queue.
You can now take messages that have already been queued and modify
their contents before they're sent out.
Signed-off-by: Daniel Sweeney <daniel.sweeney@liblime.com>
Signed-off-by: Galen Charlton <galen.charlton@liblime.com>
- grid layout (javascript required now)
- makes distinction between checkin and checkout messages
- no longer have to click on a button to submit the branch selection form
Signed-off-by: Daniel Sweeney <daniel.sweeney@liblime.com>
Signed-off-by: Galen Charlton <galen.charlton@liblime.com>
- Added code to AddIssue to send an alert when appropriate.
- Added code to AddReturn to send an alert when appropriate.
- Added a sub called SendCirculationAlert() that DOESN'T ACTUALLY WORK YET.
Signed-off-by: Daniel Sweeney <daniel.sweeney@liblime.com>
Signed-off-by: Galen Charlton <galen.charlton@liblime.com>
* C4::Category
- patron categories as objects
- an all() method to return all the categories as a list
* C4::ItemType
- itemtypes as objects
- an all() method to return all the item types as a list
* C4::ItemCirculationAlertPreference
- wrapper around the item_circulation_alert_preference table
- create() and delete() methods for easy manipulation of the preferences
- I regret giving it such a long name.
- The item_type column should've been named itemtype to make it
more similar to pre-existing tables. Oh well.
(C4::Category and C4::ItemType were made so that I wouldn't have to
write SQL inside my CGI scripts.
Their main purpose is to provide an easy way to get a list of
patron categories and item types.
Do not be fooled by the amount of POD.
There's actually very little code in these modules.)
Signed-off-by: Daniel Sweeney <daniel.sweeney@liblime.com>
Signed-off-by: Galen Charlton <galen.charlton@liblime.com>
