I correct the indenting here, so remember to diff ignoring whitespace ;)
I remove some of the page-section divs introduced by the previous patch
and instead replace the 'container' classes with the new 'page-section
class on existing divs.
This brings the page-sections more in line with elsewhere in the
codebase.
I also update the 'h3' headings to 'h2' as we were somehow skipping that
heading level page wide and update the final 'h4' heading to 'h2' to
match the other section headings appropriately.
Finally, I break up the top section more, using bg-info for the top
block of instructions.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To test:
1. Apply patch
2. Go to Adminstration > Circulation and fine rules
3. Look at the page-section added and make sure each looks good.
4. Use an HTML validator to check and make sure the HTML looks good.
Note: There are indentation changes and some fixes to bad markup ( stray tags, etc ).
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
https://bugs.koha-community.org/show_bug.cgi?id=32082
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds the page section to div to the following administration pages:
admin/cash_registers.tt
admin/cities.tt
admin/credit_types.tt
admin/debit_types.tt
admin/patron-attr-types.tt
admin/restrictions.tt
plugins/plugins-home.tt
To test go the following pages and make sure everything looks good:
Administration > Cash registers. You must enable the sys pref 'UseCashRegisters'
Administration > Cities and towns.
Administration > Credit types
Administration > Debit types
Administration > Patron restrictions
Adminstration > Patron attribute types
Administration > Manage plugins
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
https://bugs.koha-community.org/show_bug.cgi?id=32082
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch introduces a small form for an initial domain configuration
to the 'New identity provider' page, to avoid confusion on testers about
required settings for things to work.
To test:
1. Apply this patch
2. Verify you are now offered a configuration section for domain
settings. Fields like 'Default category' and 'Default library' are
mandatory.
3. Choosing some values makes them get stored on 'Submit'
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Several FIXME comments added on the report addressed here.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Lukasz Koszyk <lukasz.koszyk@kit.edu>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Lukasz Koszyk <lukasz.koszyk@kit.edu>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds a third option 'branch only' to the
OPACResultsUnavailableGroupBy system preference. This option will group
unavailable items by branch in the OPAC search results and NOT show
individual callnumbers or substatuses.
Note: This assumes OPACXSLTResultsDisplay is set to default.
To test:
1. Create a biblio record with 3 items with the following home branches:
Item A: Branch A
Item B: Branch A
Item C: Branch B
2. Check out Item A to yourself
3. Edit Item B to have a lost status
4. Go to Administration -> global system preferences. Search for
OPACResultsUnavailableGroupingBy.
5. By default, this preference will be set to 'branch'.
6. Open the OPAC in another tab, and search for your record.
7. Confirm the search results shows an Availability line with "Not
available: Branch A: Checked out (1). Branch A: Lost (1)." i.e. showing
both branch and substatus.
8. In your staff client tab, set OPACResultsUnavailableGroupingBy to
'substatus'.
9. Go back to your OPAC tab and search for your record. Confirm the
search results shows an Availability line with "Not available: Checked
out (1). Lost (1)." i.e. showing substatus only.
10. Apply patch, update database, restart services.
11. In your staff client tab, refresh the page. Confirm the options for
OPACResultsUnavailableGroupingBy have now changed to:
- branch and substatus
- substatus only
- branch only
12. Set OPACResultsUnavailableGroupingBy to 'branch only'.
13. Go back to your OPAC tab and search for your record. Confirm the
search results shows an Availability line with "Not available: Branch A
(2)." i.e. showing branch only.
14. Confirm the other two options still work as expected.
Sponsored-by: Chartered Accountants Australia and New Zealand
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Field <jonathan.field@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Add the ability to create new titles and attach them to a package.
The MARC to KBART2 mapping is the following (based on
https://github.com/adambuttrick/marc_to_kbart/blob/master/convert.py):
publication_title = biblio.title
print_identifier = 020$a||020$z||022$a||022$y
online_identifier = 020$a||020$z||022$a||022$y
date_first_issue_online = 866$a (before '-')
date_last_issue_online = 866$a (after '-')
num_first_vol_online = 863$a (before '-')
num_last_vol_online = 863$a (after '-')
num_first_issue_online = ?
num_last_issue_online = ?
title_url = 856$u
first_author = biblio.first_author
embargo_info = ?
coverage_depth = title_url ? 'fulltext' : 'print'
notes = $852$z
publisher_name = 260$b
publication_type = ?
date_monograph_published_print = ?
date_monograph_published_online = ?
monograph_volume = ?
monograph_edition = ?
first_editor = ?
parent_publication_title_id = ?
preceeding_publication_title_id = ?
access_type = ?
Note that title is not created (and so the resource) if a title from
this package already has a link to this bibliographic record.
Is that correct, or should we create another resource?
Should the import screen also have "start date" and "end date" to set for the
resource?
QA note: Ideally we would like to fetch the list from the REST API but the routes
are not there yet.
Signed-off-by: Jonathan Field <jonathan.field@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Field <jonathan.field@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Field <jonathan.field@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Field <jonathan.field@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Field <jonathan.field@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Syspref 'ERMModule'
Permission 'erm'
Table 'erm_agreements'
3 new av categories:
* ERM_AGREEMENT_STATUS
* ERM_AGREEMENT_CLOSURE_REASON
* ERM_AGREEMENT_RENEWAL_PRIORITY
Signed-off-by: Jonathan Field <jonathan.field@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
In Elasticsearch mappings table, in tabs with MARC fields, searching using DataTable search field does not work for MARC fields / subfields.
This is because cell contains an input HTML tag with MARC data in attribute value.
Test plan :
1) Go to Administration > Search engine configuration (Elasticsearch)
2) Go to tab 'Bibliographic records'
3) Enter in search field a used MARC field (like 245)
=> Table gets filtered by rows with mapping on searched field
4) Enter in search field the field+subfield used for issues (952l in KTD)
=> Table gets filtered by rows with mapping on field+subfield
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Rebecca Coert <rcoert@arlingtonva.us>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch updates the 'public' hint to include the additional
functionality we now tie to it.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To test:
1. Go to the System preferences > Local use
2. Notice there is no page section and the table has much more space on the left than other system preference sections
3. Apply patch
4. Look again, the extra space on the left should be eliminated and the page-section should be added.
5. Use an HTML validator to spot errors.
Note: I elimiated the inline style on the table that set the width to 80%. I don't see why that is needed but if it is we should be using CSS to do so.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Bug 24434 reinstated the 'updateWrongTransfer' call here, but made the assertion that
the transfer should not be sent until 'Ok' was clicked.
I see how unsent transfers are useful for rotation, but I believe for wrong transfer we shouldn't require a confirm or print. If a library does want to, the 'transfersblockcirc' system preference will enforce clicking the button
to continue
This patch also confirms a transfer when item already has a transfer and only options are Confirm/Print because the transfer already exists
To test:
1 - Disable TransfersBlockCirc system preference
2 - Manually transfer an item from branch A to branch B
3 - Check in the item at branch A
4 - Dismiss modal without confirming
5 - View item on biblio details page, item not in transit
6 - Check in item, confirm transfer
7 - Note item in transit on details page
8 - Check in the item at branch C
9 - Dismiss modal without confirm
10 - View item on biblio detail, not in transit
11 - Checkin at A, cancel transfer
12 - Apply patch
13 - repeat 1 - 4
14 - Confirm item appears in transit
15 - Check in at branch C, dismiss modal
16 - Confirm item in transit
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch corrects the class on the "Did you mean?" page's save button
so that it is consistent with other primary submit buttons.
To test, apply the patch and go to Administration -> Did you mean?
The "Save configuration" button should be yellow.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch updates the structure of the background jobs template so that
HTML processed in the report includes is well styled. The patch does
this by breaking the report and detail includes out of the fieldset and
putting them in a separate section.
This patch also adds the page-section class to the table view of current
and past background jobs.
Note: The patch includes indentation changes, so please ignore
whitespace when viewing the diff.
To test, apply the patch and go to Administration -> Manage jobs.
- The table of jobs (even if empty) should be contained in a
page-section style white box.
- Test various processes which trigger a backgroud job:
- Batch item modification
- Batch item deletion
- Batch hold deletion
- Batch record modification
... etc.
- After each process has been started, view the details of the job.
- The information about the job shold be displayed well, with separate
sections for "Report" and "Detailed messages."
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch makes changes the button markup in Administration templates
so that all submit buttons and any buttons that should should be styled
as primary buttons have the Bootstrap class "btn btn-primary."
To test, apply the patch and view pages in Administration to confirm
that everything looks correct. In most cases there are no visible
changes.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds a page-section div to some administration pages in order
to provide a consistent structure visual contrast. The following pages
are modified:
Additional fields
Funds
Authority types
Authority types -> MARC tag structure
Authority types -> MARC tag structure -> Subfields
MARC bibliographic framework
MARC bibliographic framework -> MARC tag structure
MARC bibliographic framework -> MARC tag structure -> Subfields
MARC Bibliographic framework test
Classification configuration
Currencies and exchange rates
EDI accounts
Library EANs
Item search fields
Koha to MARC mapping
Record overlay rules
Record matching rules
OAI sets configuration
SMTP servers
Z39.50/SRU servers
To test, view each page to confirm that the page-section div visibly
delineates the main content area.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds a link back to the current authorized value category to
the breadcrumbs. The page title has also been modified to match.
To test apply the patch and go to Administration -> Authorized values.
- Click an authorized value category, e.g. CCODE.
- Click "New authorized value for CCODE"
- In the breadcrumbs menu you should see: "Home -> Administration ->
Authorized values -> Authorized values for category CCODE -> New
authorized value.
- The "Authorized values for category CCODE" link should take you back
to the correct view.
- The page title should match.
- Return to the list of CCODE authorized values and open one for
editing.
- The breadcrumbs should include a link back to "Authorized values for
category CCODE"
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Switches "not for loan message" to "not for loan description" to
stay closer to the usual terminology for AV values also used
when managing them.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This can be used to instruct staff how the item should handled when
it's checked in. For example items notforloan status has been
changed as "Invoiced item" while item has been on loan. When it's
checked in staff sees that they should put item aside for further
processing.
To test:
1. Apply patch and update database if needed
2. Set items notforloan status as -1 (or create new one)
3. Add line "-1: ONLYMESSAGE" to UpdateNotForLoanStatusOnCheckin
4. Check item out for patron.
5. Check item in.
=> Description of notforloan status should be displayed.
=> Confirm notforloan status hasn't changed.
Also prove t/db_dependent/Circulation/issue.t
Sponsored-by: Koha-Suomi Oy
Signed-off-by: Sally <sally.healey@cheshiresharedservices.gov.uk>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Devs forgot to mention the default value (empty) is for the current
behavior. This is particularly important as there's really no shipped
XSLT so a niche usage enhancement until related bugs are pushed. Those
only have UNIMARC files, though.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
* Moves the AuthorityXSLTOpacResultsDisplay from staff interface to OPAC tab
* Fixes some capitalization opac in the database pref description
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds a syspref to allow customizing the authority results
view at OPAC with XSLT
Test plan:
1. For testing make sure to have at least one or more authorities
defined
2. OPAC: Home > Authority search(Submit) > Authority search results
Notice the normal view of results
3. Apply patch
4. INTRA: Home > Administration > System preferences ->find
"AuthorityXSLTOpacResultsDisplay"
5. Write the path where your file is. You can use the one for intranet:
.../koha/koha-tmpl/intranet-tmpl/prog/en/XSLT/UNIMARCauthResults.xsl
6. Save changes
7. Repeat step 2 and notice the xslt view of results
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
TO test:
1. Do an empty system pref search
2. Layout is broken.
3. Apply patch, restart_all
4. Do another empty system pref search, the layout should be fixed.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds links to the authorized value interface anywhere an
authorized value category is mentioned in a system preference
description.
To test, apply the patch and go to Administration -> System preferences.
- Check these preferences:
Circulation -> ILLHiddenRequestStatuses
Circulation -> BundleLostValue
Circulation -> BundleNotLoanValue
Circulation -> ClaimReturnedLostValue
Accounting -> RequirePaymentType
- Confirm that the link in the description of each preference takes you
to the correct authorized value category.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds the page-section div around each library-groups table.
Test plan
1) Check that the 'card' views appear appropriates on the library groups
maangement page
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds a small warning sign before the sentence and also puts
the sentence inside a span.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch modifies the description of the 'Ignore' tab in
MARC bibliographic and authority framework administration
to add that not only does the 'ignored' subfield not appear
in the editor, but the subfield will also be deleted from the
record.
To test:
1. Go to Administration > MARC bibliographic framework
2. Click 'Actions' next to any framework and choose 'MARC structure'
3. Click 'Actions' next to any field and choose 'Edit subfields'
4. Check the hint/description under 'Managed in tab' and make sure it
- makes sense
- is written in correct english (syntax and spelling)
- mentions that the subfield's value will be deleted from the record
5. Go to Administration > Authority types
6. Redo steps 2-4 for authority frameworks
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Rename "..staff client.." to "..staff interface.." in the description for the
HoldsSplit Queue system preference, as per the terminology guidelines.
Test plan.
1. View the description for the HoldsSplitQueue system preference.
2. Note that the description says "..staff client..".
3. Apply the patch.
4. Note that the description now says "..staff interface.." as per the
terminology guidelines (https://wiki.koha-community.org/wiki/Terminology#S).
5. Sign off :D
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch re-arranges the logic for displaying the search term when
executing a system preference search.
Test plan
1) Without the patch, search for something that will get no results
'boing' and note how it looks
2) Without the patch, search for something that gets some results
'block' and note how it looks
3) Apply the patch
4) Repeat your searches and comment on whether the look is better of
worse ;P
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To test:
1. Apply patch
2. Look at Administration > Additional fields.
3. Each of the 4 tables should have a page-section div around it:
Order baskets (aqbasket)
Subscriptions (subscription)
Account lines (credit) (accountlines:credit)
Account lines (debit) (accountlines:debit)
Note: There are some indentation changes.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
We are now using the patron category selects on almost all system
preferences, but OpacHiddenItemsExceptions was still missing.
To test:
- Before applying the patch:
- Add patron categories to OpacHiddenItemsExceptions using |
- Add configuration to OpacHiddenItems
- Verify all works as expected in the OPAC
- Apply patch, run database update
- Verify the system preference shows the correct settings from before
- Verify feature still works as expected
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds support for additional fields for invoices. A new option
is added to the 'Additional fields' admin page, for the 'aqinvoices'
table.
Adding/editing invoices now supports this additional fields.
To test:
1. Apply this patches
2. Verify the original test plan works
=> SUCCESS: It does!
3. Sign off :-D
Sponsored-by: The Research University in the Helmholtz Association (KIT)
Signed-off-by: Michaela Sieber <michaela.sieber@kit.edu>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds the page-section container to the patron categories
administration page
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds the page-section container to the authorized_values
administration area.
Test plan
1) Confirm that the AV admin area looks reasonable for all area's of
display
https://bugs.koha-community.org/show_bug.cgi?id=31942
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds the page-section container to the item types
adminstration page
Test plan
1) Confirm the item types administration page uses the card view around
the main table
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds the page-section class to the appropriate blocks in the Libraries administration area.
Test plan
1) Confirm that Administration > Libraries correctly displays the table
inside a page-section card
2) Confirm that Administration > Libraries > 'A library' correctly
displays a card for the main information at the top and a separate
card for OPAC Information if added.
3) Confirm that the 'Add' and 'Edit' library forms still look good.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Some other IF/ELSE/END can be changed to facilitate translation
Test plan :
Always test with default framework and with another framework and
compare with and without patch
1) View subfields of field
=> Check the h1 in page
2) Perform actions on a field (create, modify, delete)
=> Check breadcrumbs and h1 in page
3) View the framework table
=> Check columns Repeatable, Mandatory, Important
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch changes the strings in the IF ELSE for the framework
name in the breadcrumbs on the marc_subfields_structure.pl page.
To test:
1) Apply patch
2) In the intranet, go to Administration > MARC bibliographic framework
3) Click 'Actions' next to the default framework and choose 'MARC
structure'
4) Click 'Actions' next to a MARC tag and choose 'View subfields'
5) Check the breadcrumbs, they should show
Home > Administration > MARC frameworks > Default framework structure >
...
6) Redo steps 2-5, using a different framework, e.g. ACQ
The breadcrumbs for ACQ should look like
Home > Administration > MARC frameworks > ACQ framework structure > ...
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Like Bug 31810, save button in Elasticsearch mappings page is the most important action on this form, it should be yellow.
Test plan :
Go to Administration > Search engine configuration (Elasticsearch)
=> Check save button has class btn-primary and is yellow
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To test:
1. Go to Adminstration and click on 'Global system preferences'
2. From the left side bar click 'I18N/L10N' and notice no sidebar.
3. Also try 'Serials', no sidebar
4. Apply patch, restart_all
5. Try 1 & 2 again and the sidebar should be restored
6. Try clicking through each of the system preference groups (Accounting, Acquisitions, etc ) and make sure the sidebar is always present.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
We need to replace 0 with 'disabled', and 1 with 'enabled'
Sponsored-by: Rijksmuseum, Netherlands
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This amends the system preference description for PrefillItem
to explain what happens when the pref is left empty.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch removes not required (for now) query parameters as we can
query using q= on those. They can be added back eventually, if needed.
Attributes now match the database as well.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This feature is awesome, but it's modals all feel a bit off.. this is an
improvement to one of them, but far from perfect.
I opt to work with Owen to create a guideline (and template) for modals going
forward and let this patchset go in as is.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Sponsored-by: Sponsored by: Round Rock Public Library [https://www.roundrocktexas.gov/departments/library/]
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patchset adds a new ability to save searches on the staff client, and display them in the results
page on staff or opac as a new filter.
New filters can be added from the resuilts page after a search, and there is an admin page for updating
deleting and renaming filters
There is a new permission to control management of these filters
New filters can be added that are not displayed along with facets, this allows for building custom links
using these filters to keep URLs shorter
Due to bug 30528 testing in ES is recommended
To test:
1 - Apply patches and update database and restart all
2 - Enable new system preference 'SavedSearchFilters'
3 - As superlibrarian perform a search in staff client, something broad like 'a'
4 - Note new 'Save search as filter' link on results page
5 - Click it, save search as new filter, check 'Staff client' visibility
6 - Perform another search
7 - Note the filter now appears above facets
8 - Click to it filter results
9 - Note results are limited by the new filter, and it is checked in the facets
10 - Confirm click the [x] removes the filter
11 - Go to administration->search filters
12 - Confirm the filter appears
13 - Edit and mark as OPAC visible
14 - Test OPAC to ensure it shows and can be applied/removed
15 - Copy URL with filter applied
16 - In adminsitration mark filter as not visible on staff or opac
17 - Confirm link above still works
18 - Create a new staff with catalogue and search filters permission
19 - Ensure they can access/save filters
20 - Remove filter permission and ensure they cannot
21 - Disable system preference
22 - Confirm links to search filters page are removed from admin home and admin sidebar
23 - Confirm filters do not appear on results and cannot be created
24 - Enable pref
25 - Create a filter
26 - From search filters page, click 'Edit search'
27 - Confirm you are taken to advanced search page letting you know which filter you are editing
28 - Confirm you can change searhc options and save
29 - Confirm you can perform the search from this page
Sponsored-by: Sponsored by: Round Rock Public Library [https://www.roundrocktexas.gov/departments/library/]
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds the new table, permission, and a syspref to enable the feature
Sponsored-by: Sponsored by: Round Rock Public Library [https://www.roundrocktexas.gov/departments/library/]
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Set searchable to false for opac_info.
Test plan:
Check if DT search for libraries works again.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
[EDIT] Reverted the data/render function change as requested
by Jonathan. Considering the fact that dataTables or custom
extensions do not check col.data.split as a clear bug btw.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This adds a note to the circulation rules page that already
explained about ReservesControlBranch to also include information
about the new CircControlReturnsBranch system preference.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Rephrased in hope to make its use a little clearer:
* 'logged in at' replaced with 'checked in at' keeping self checks in mind
* 'At checkin' rephrased a bit to explain possible options
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
1) Apply this patch
2) Run updatedatabase.pl
3) Verify CircControlReturnsBranch is set to home library by default
4) Set a Return policy for Branch A to "Item returns home" ( homebranch )
5) Set a Return polity for Branch B to "Item returns to issuing library" ( holdingbranch )
6) Set a Return polity for Branch C to "Item floats" ( noreturn )
7) Create an item with homebranch of Branch A, holding branch of branch B
8) Log in as Branch C
9) Set CircControlReturnsBranch to "the library the item is currently held by"
10) Check the item in, note it should be returned to the holding library
11) Set CircControlReturnsBranch to "the library the item is owned by"
12) Check the item in, note it should be returned to the home library
13) Set CircControlReturnsBranch to "the library you are logged in at"
14) Check the item in, note it should float
Signed-off-by: Andrew Fuerste-Henry <andrewfh@dubcolib.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch allows users to change the pickup location for their holds
from the opac. A syspref (OPACAllowUserToChangeBranch) controls at what
stage a hold can be changed.
To test:
1. Set up holds with diffrent statuses for a patron (pending, waiting,
in transit, suspended)
2. No pickup locations for any hold should be able to be changed.
3. Turn on and off the different options under
OPACAllowUserToChangeBranch. Make sure that only the corresponding
holds can be changed from the opac. Check eg in the staff client that
pickup location has changed.
4. The available pickup locations should respect any transfer
restrictions. (Same as the
holds list for a biblio in staff client)
5. For an in-transit hold: Check in the item at the original pickup
location.
6. Note that it will be redirected to the new location.
Sponsored-by: Lunds Universitetsbibliotek
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Barbara Johnson <barbara.johnson@bedfordtx.gov>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To test:
1. Apply the patch and go to Administration -> Audio alerts
2. Confirm that the screen/table look correct with the page-section class added.
Note: There are some indentation changes.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch add the context 'noun' to the 'Filter' string in
marc-overlay-rules.tt. This will separate that instance of 'Filter' from
the other ones, where it is meant as a verb.
To test:
1. Apply patch
2. Visit Administration > MARC overlay rules, make sure the page works
(no errors) and that there is a column called 'Filter'
3. Update the po files
gulp po:update --lang xx-XX
for example, gulp po:update --lang fr-CA
4. Check the xx-XX-messages.po file (e.g.
misc/translator/po/fr-CA-messages.po), there should be an entry for
'Filter', with a line msgctxt that gives the 'noun' context
5. Update the file with a random word for the 'Filter' translation
for example, I translated 'Filter' by 'Filter as a noun', just to see
the difference
\#: koha-tmpl/intranet-tmpl/prog/en/modules/admin/marc-overlay-rules.tt:83
msgctxt "noun"
msgid "Filter"
msgstr "Filter as a noun"
6. Install a new language
6.1. Run the following commands in the terminal, replacing xx-XX with
the language code (e.g. fr-CA)
cd misc/translator
./translate install xx-XX
6.2. In the Koha staff interface, go to Administration > Global system
preferences
6.3. Search for language
6.4. Check the box next to the new language
6.5. Save
7. View the MARC overlay rules page in the new language, the 'Filter'
column heading should be whatever you put in step 5
Optional test
8. In the staff interface in English, view one or more of these pages,
the 'Filter' should be unchanged
- Acquisitions > Late orders (Filter button)
- Aquisitions > Search for vendor > Receive shipments (Filter heading on
the left and Filter button)
- Acquisitions > Search for vendor > Click vendor's name > Uncertain
prices (Filter button)
- Administration > Budgets > Click budget's name > Planning > Plan by
... (any option) (Filter heading on the left)
- Reports > Use saved (Filter heading on the left)
- Reports > Acquisitions statistics wizard (Filter column heading)
- Reports > Patrons statistics wizard (Filter column heading)
- Reports > Catalog statistics wizard (Filter column heading)
- Reports > Circulation statistics wizard (Filter column heading)
- Reports > Holds statistics wizard (Filter column heading)
- Reports > Average loan time (Filter column heading)
- Tools > News (Filter heading on the left)
9. View these same pages in the other language, the Filter should NOT be
changed to whatever you put in step 5
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
An alternative that puts adds a new page-section div around each
preference subsection rather than around the whole tab section.
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Edit: changed the title
Remove 'i' added to the end of the breadcrumb on the confirmation page
when deleteing a MARC framework subfield.
Test plan:
1. Go to Administration > MARC bibliographic frameworks.
2. View the subfields for a tag for a framework, for example:
. BKS framework > Actions > MARC structure
. Search for tag 245
. Select Actions > View subfields.
3. Select any subfield to delete and select the Delete button.
4. Note that there is an 'i' at the end of the breadcrumb, for example:
. ... > Confirm deletion of subfield bi
5. Apply the patch.
6. Refresh the page and note that that 'i' is removed.
7. Sign off.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Issue #32
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
What this patch does:
- change the navigation bar style
- change the breadcrumbs style
- change the "last borrower" link style
- move the search bar inside the navigation bar
- move the help link to the same row as the breadcrumbs
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds a new English 1 page layout to be used when exporting a
basketgroup as PDF. This has been modelled after an example PDF from
another library system.
To test:
1) Go to Koha Administration -> Libraries. Ensure Library A has an
address, phone and fax.
2) Go to Koha Administration -> System preferences. Search for
OrderPdfFormat. Set this to the new English 1-page layout option.
3) Go to Acquisitions. Use an existing vendor or create a new one.
Ensure the vendor has a postal address, phone, fax and accout number.
4) Create a basket for this vendor. Add a few orders to the basket.
5) Close the basket and add it to a basket group of the same name.
6) Edit the basket group. Add an address in the delivery place, and a
delivery comment. Check the box to close the basket group and Save.
7) Click the button to Export as PDF.
8) View the exported PDF. Confirm all of the information displayed is
correct.
9) Reopen the basketgroup. Edit the details and remove the delivery
place text. Re-close the basketgroup.
10) Repeat steps 7 and 8.
Sponsored-by: Pymble Ladies' College
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch removes some very old inline style attributes from the fund
edit form. The "white-space" attribute prevented label text from
naturally wrapping.
To test, apply the patch and go to Administration -> Funds.
- In the list of funds, click Actions -> Edit.
- The the form, confirm that the text of the "Statistic" 1 and 2 labels
wraps, not getting hidden by the associated select tags.
Signed-off-by: Barbara Johnson <barbara.johnson@bedfordtx.gov>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Combines suggestion and suggestionPatronCategoryExceptions so
they can be easily set together and rephrases slightly.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Introduce a suggestionPatronCategoryExceptions system preference.
If the suggestion syspref is enabled then libraries can stop specific
borrower types from making suggestions by ticking the type in the
suggestionPatronCategoryExceptions syspref.
Test plan:
1. Apply patches, update database, re-start services
2. Set 'suggestion' syspref = 'Allow'
3. Confirm you can view the purchase suggestion links on OPAC biblio detail
page & 'your summary' page. As well as successfully submit a suggestion.
4. Select the patron category you're logged in as in
suggestionPatronCategoryExceptions syspref
5. Confirm the purchase suggestion links are hidden in the OPAC biblio
detail page & 'your summary' page
6. In your browser enter the link: <OPAC base URL>/cgi-bin/koha/opac-suggestions.pl
e.g. http://localhost:8080/cgi-bin/koha/opac-suggestions.pl
7. Confirm a 404 page loads
8. Confirm you can view/moderate suggestions in the staff
client - even though your patron is selected in the
suggestionPatronCategoryExceptions syspref
9. Untick your patron category in the suggestionPatronCategoryExceptions syspref
10. Confirm you can view the purchase suggestion links on the OPAC, as
well as successfully submit a suggestion.
11. Set 'suggestion' syspref = "Don't allow"
12. Confirm the purchase suggestion links are hidden in the OPAC
13. Select all patron categories in suggestPatronCategoryExceptions
syspref. View the OPAC without logging in and confirm you can perform
searches and view OPAC biblio detail pages.
Sponsored-by: Catalyst IT, New Zealand
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch add a new security notice to allow sending notification of
password changes to patrons. If enabled, the 'PASSCHANGE' notice will be
sent to respective patrons whenever their password is updated.
Test plan
1) Run the database updates
2) Enable the new feature by setting 'NotifyPasswordChange' to 'Notify'
3) Change a users password
4) Check that the notice appears in the patrons notices
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Test plan:
1. Install another language in the staff interface
1. in commandline: `cd misc/translator/; ./translate install xx-XX`
2. Check the box of the language in the 'language' system preference
and save
3. Refresh and you should be able to choose languages
2. Create an item type with a parent
1. Go to Administration > Item types
2. Create a new item type or modify an existing one, assigning a parent type (I created a 'Children's books' type and assigned 'Books' as its parent)
3. Create a circulation rule for the parent type (I created All/Books, with 10 checkouts allowed)
4. Create a circulation rule for All/All (I created All/All with 30 checkouts allowed)
5. In English, click on "Edit" next to the parent type rule (All/Books)
--> Note that the item type in the bottom row (the modifiable row) is changed to 'Books (All)'
6. Modify the number of checkouts allowed (e.g. 99)
--> The All/Books rule is modified
7. Switch the interface to the other language
8. Click on "Edit" next to the parent type rule (All/Books)
--> Note that the item type in the bottom row stays on 'All'
9. Modify the number of checkouts allowed (e.g. 88)
--> The All/All rule is modified
10. Apply the patch, translate again and refresh the page
11. Do step 8-9 again and notice it now behaves as it should
Signed-off-by: Emmanuel Bétemps <e.betemps@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Without this patch suggestion and OPACViewOthersSuggestions appeared
grouped with other preferences. This patch restores them as separate
entries under the new Suggestions heading.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Confirm all suggestion preferences are now grouped.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Michaela Sieber <michaela.sieber@kit.edu>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds the focus class to ensure focus is given to the first form element on the SMTP server entry page.
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The preference was using a yes/no instead of the more common
display/don't display. This patch switches it to the latter
and adds a note about position 17.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
See documentation at:
https://www.oclc.org/bibformats/en/fixedfield/elvl.html
To test:
1 - Apply patch, updatedatabase
2 - Edit a record in the basic editor
3 - Edit the leader using the plugin
4 - Note the options for '17 - Encoding level'
5 - Find the system preference 'UseOCLCEncodingLevels'
6 - Edit the record again
7 - Note new options I,J,K,M
8 - Set the value of encodign level to one of the new options and save
9 - Edit again
10 - Confirm the value is displayed correctly selected
11 - Repeat tests using advanced cataloging editor
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This makes the new perferences EmailPatronRegistrations and EmailAddressForPatronRegistrations
follow a little more closely the pattern set by the very similar
EmailPurchaseSuggestions and EmailAddressforSuggestions.
* Group both preferences into one entry
* Add line break between preferences
* Switch branch for library in pull down
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Sponsored-by: Catalyst IT
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Adds a new ILL_REQUEST_UPDATE notice which is to be used for the
formation of notices informing users of updates to ILL requests.
Commit includes database updates and template changes for messaging
preferences
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
https://bugs.koha-community.org/show_bug.cgi?id=28909
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The template now contains two lists for both status and type:
a TT list and a JS list. The type list already proves that
redundancy leads to bugs. We miss three types at one side:
Unknown job type 'stage_marc_for_import'
Unknown job type 'marc_import_commit_batch'
Unknown job type 'marc_import_revert_batch'
This patch removes the TT list. And gets the status and type
via an additional js call. For that reason I hide the fieldset
until document ready. This can be improved later when needed.
Test plan:
Look at status and type on both job list and detail view.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Disclaimer: this patch is highly opinionated :-D
When I started looking at this patch I felt like the two tables
(current/past jobs) implemented on bug 30462 was the way to go.
In order to make this patches apply after it I had to redo all the
things. Or most of them.
But I decided to keep the idea of filtering out completed tasks, not
just having the option to display 'the last hour' tasks. For the task I
added some required helper methods and the relevant tests as well. So a
behavior change.
Hope you all agree with it.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch fixes the issues highlighted by the QA script; We use double
quotes for translatable strings in JS and remove an errant console.log
call.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
These are not shown, so cannot be unwanted or mandatory
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Test plan:
1. Go to Admin » Additional fields
There are two new categories: "Account lines (credit)" and
"Account lines (debit)"
2. Create fields for both categories, with and without an authorized
value category
3. Go to a user's accounting page
4. Create a manual invoice. Verify that all "debit" fields are there,
put a value in them and save
5. Create a manual credit. Verify that all "credit" fields are there,
put a value in them and save
6. Make a payment. Verify that all "credit" fields are there, put a
value in them and save
7. Go to the transactions tab, click on the "Details" button for the
lines you just created and verify that the additional fields are
there
Signed-off-by: Emmanuel Bétemps <e.betemps@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
When adding a new city, the focus/cursor should be
in the first input field of the form: City
To test:
* Add a new city in administration > cities
- cursur is in no field
* Apply patch
* Add another new city
- cursor is now in the first input field of the form: City
https://bugs.koha-community.org/show_bug.cgi?id=27193
Signed-off-by: Barbara Johnson <barbara.johnson@bedfordtx.gov>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This flips the pref from an allowance to a requirement, hopefully this makes the logic here clearer
Test as before, but the values for the renamed pref flipped
Signed-off-by: AFHDubCoLib <andrewfh@dubcolib.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds two new sysprefs:
AutoLinkBiblios
AllowManualAuthorityEditing
Both inherit the setting from BiblioAddsAuhtorities which is removed
To test:
1 -Apply patches
2 - Update database
3 - Confirm old setting is transferred to new option
4 - Confirm you can edit authoriteis manually if AllowManualAuthorityEditing set to allow
5 - Confirm you cannot edit authorities manually if AllowManualAuthorityEditing set to don't allow
6 - Confirm a new bib is linked when AutoLinkBiblios is enabled (set AllowManualAuthorityEditing to add unlinked heading)
7 - Confirm new bib notlinked when AutoLinkBiblios is disabled
8 - Confim new bib not linked when AutoLinkBiblios is enabled, but heading doesn't match an authority and AutoCreateAuthorities is disabled
9 - Confim new bib linked to new authority when AutoLinkBiblios is enabled, but heading doesn't match an authority and AutoCreateAuthorities is enabled
Signed-off-by: AFHDubCoLib <andrewfh@dubcolib.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Test plan:
[1] Go to Administration / libraries.
[2] Check list view.
[3] Check view on individual library with/without opac info.
[4] Edit individual library with/without opac info.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds two system preferences options : 'RetainCatalogSearchTerms' and 'RetainPatronsSearchTerms'. If enabled, search terms will be retained between searches made from, respectively, the Search Catalog header and the Checkout or Search Patrons headers. If disabled, the searchbars will clear out between page loads.
Attention, this is an alternate solution from the previous patches, ONLY apply this patch when testing and not the previous ones.Changed the syspref wording as well.
To test:
1 - From the staff client, search some terms using the Check out header search bar.
2 - Confirm search terms are retained.
3 - Do Step 1-2 twice again, this time using the Search patrons and Search the catalog.
4 - Apply patch (again, only this one), update database.
5 - In the system preferences, look for RetainCatalogSearchTerms and set it to 'don't retain'.
6 - Use the checkout head search bar again, confirm that search terms aren't retained after page load.
7 - Do Step 5-6 once again, this time with the RetainPatronsSearchTerms and the Search Patrons and Search the catalog headers.
8 - Search boxes should be cleared.
Thanks-to: Fridolin Somers and Nick Clemens for the bases I built on.
Signed-off-by: Florian Bontemps <florian.bontemps@biblibre.com>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch corrects the description of the ComponentSortField system
preference, as it affects both the staff interface and the OPAC.
To test:
1) Apply patch
2) Go to Administration > Global system preferences
3) Search for ComponentSortField
4) Read the description, make sure there are no errors
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds a new system preference:
autoControlNumber
The option "biblionumber" will set field 001 to the biblionumber when you create a new record
or edit an existing record and clear the 001 field.
If a value is present in 001 when saving the record it will be preserved.
If set to 'OFF' the 001 field wil not be touched
When duplicating a record the 001 will be removed if autoControlNumber is set
To test:
1 - Apply patches and updatedatabase
2 - Create a new record with no 001 field
3 - Save and view the MAC, confirm there is no 001
4 - Set the system preference to 'biblionumber'
5 - Edit the record you created previously
6 - Note the 001 is prepopulated with the biblionumber
7 - Delete the field
8 - Save the record
9 - View the MARC, the 001 is filled with biblionumber
10 - Edit the record
11 - Set the 001 to a different value "Not the biblionumber"
12 - Save
13 - View the marc and confirm the value you entered is retained
14 - Edit a record with an existing 001 that is not the biblionumber
15 - Save and confirm 001 is not updated
To test duplication:
1 - Edit a record as duplicate when using the advanced editor
2 - Confirm the 001 does not load, but record saves correctly
3 - Edit the record
4 - Switch to 'basic editor'
5 - Save, then view record
6 - Edit as duplicate in basic editor
7 - Confirm the 001 is removed
8 - Confirm the 001 is added on save
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Thomas Klausner <domm@plix.at>
Signed-off-by: Andrew Nugged <nugged@gmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This column will always be empty
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This follow-up reduces the completed jobs list to only those jobs
completed within the last 60 minutes.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch updates the background jobs management page to display
queued and completed jobs in their own tabs on the page.
JD Amended patch:
Fix QA failures:
FAIL koha-tmpl/intranet-tmpl/prog/en/modules/admin/background_jobs.tt
FAIL forbidden patterns
forbidden pattern: trailing space char (line 158)
forbidden pattern: trailing space char (line 256)
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
When adding a new patron category, the focus/cursor should be
in the first input field of the form: Category code
To test:
* Add a new patron category in administration > patron categories
- cursur is in no field
* Apply patch
* Add another new patron category
- cursor is now in the first input field of the form: Category code
Signed-off-by: Barbara Johnson <barbara.johnson@bedfordtx.gov>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
When adding a new patron attribute, the focus/cursor should be
in the first input field of the form: Patron attribute type code
To test:
* Add a new patron attribute - cursur is in no field
* Apply patch
* Add another new patron attribute - cursor is now in
the first input field: Patron attribute type code
Signed-off-by: Barbara Johnson <barbara.johnson@bedfordtx.gov>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
When adding a new authority type the focus should be on the
first field of the input form: Authority type
* Add a new authority type from administration > authority types
* Verify the focus is not on any of the form fields/inputs
* Apply patch
* Add another new authority type
* Verify the focus/cursor is now in the Authority type field
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This makes sure the cursor/focus is always in the first form
field when adding an entry on the classification configuration page.
* Got to administration > classification sources
* Verify for each of the three "New ..." buttons on top that
the entry form has no focus on any field
* Apply patch
* Repeat testing the new forms and the focus now should always
be in the first input field of the entry form
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
When adding a new matching rule the cursor/focus should be in
the first input field of the form: Matching rule code
* Add a new matching rule form administration > matching rules
* Verify the cursor is in the search form on top of the page
* Apply patch
* Add another new matching rule
* Verify the cursor is now in the first input field of the form
Signed-off-by: Barbara Johnson <barbara.johnson@bedfordtx.gov>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
When adding a new bibliographic framework, the focus/cursor should be
in the first input field of the form: Framework code
To test:
* Add a new bibliographic framework from adminsitration > bibliographic
MARC frameworks
- cursur is in no field
* Apply patch
* Add another new framework
- cursor is now in the first input field of the form: Framework code
https://bugs.koha-community.org/show_bug.cgi?id=27191
Signed-off-by: Barbara Johnson <barbara.johnson@bedfordtx.gov>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Test plan:
1. Visit Administration > Accounting > Cash registers and notice the
cursor is not focussed in the first input field (Name)
2. Apply patch
3. Refresh the new cash registers page and confirm your cursor is
focussed in the first input field (name)
Sponsored-by: Catalyst IT, New Zealand
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch corrects the terminology for staff interface in the record overlay rules administration page.
To test:
1) Apply patch
2) Enable the MARCOverlayRules system preference
3) Go to Administration > Record overlay rules
4) Open the 'Filter' drop-down menu
=> The second option should read 'Staff interface MARC editor'
Signed-off-by: Michaela Sieber <michaela.sieber@kit.edu>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
For kohaTable these are the default values.
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Our calls to instantiate a kohaTable from JS were inconsistent in how
they pass table_settings where no table_settings exist.
This patch replaces empty arrays and empty hashrefs with a consistent
'null' being passed to ake it clear we don't have any settings to pass
yet.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch corrects a typo in the EnableExpiredPasswordReset system preference description.
To test:
1) Apply patch
2) Go to Administration > Global system preferences
3) Search for EnableExpiredPasswordReset
4) Read the description and make sure there are no errors.
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Some libraries handle refunding of paid lost fees at a financial office and not within Koha. To facilitate this, it would be good for Koha to have the option to not generate lost returned credits by skipping fully paid lost items, and only refunding the outstanding balance on partially paid lost fees.
Test Plan:
1) Apply this patch
2) Set your lost item refund on return policies to 'Only if unpaid'
3) Mark an item lost, charging the lost fee
4) Return the item, a full refund should occur
5) Mark another item lost, charging the lost fee
6) Make a partial payment on this lost fee
7) Return the item
8) The remaining balance of that fee should be 0, but the patron should
not recieve a credit for the already paid balance
8) Mark another item lost, charging the lost fee
9) Fully pay the lost fee
10) Return the item. The paid lost fee should be unaffected.
11) Run tests in t/db_dependent/Circulation.t
Signed-off-by: Lisette Scheer <lisetteslatah@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch moves the new classes under ::Patron::Restriction:: and
enhances the Unit tests for those classes.
NOTE: We should drop keyed_on_code as part of bug 31095
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch removes the superflous whitespace around the restriction
descriptions and also adds the missing question mark into the delete
question.
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch removes the 'can_be_added_manually' flag. Only non-system
restriction types can be added manually, so we exclude is_system instead
of having two flags. (And we set the 'Manual' that's added at install
time to default but not system).
We then add proper handling for setting the default manual restriction
type in the management page and set the dropdown list to use that value
by default.
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch restores the customisability of description for system restriction
types. Translatability is not affected as you can translate the defaults
via template translation and assuming the end users leave their
descriptions at the default, the translations will be picked.
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch removes the new PatronRestrictionTypes preference from the
accounting area in preference to creating a new group for 'Patron
restriction' related preferences in the circulation preferences tab.
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch fixes following QA issues:
- convert intaller files as .yml
- change column name readonly as is_system
- change column name is_system as default_value
- add column can_be_added_manually (testplan for this below)
- move syspref "PatronRestrictionTypes" to "Accounting > Features" tab
- tweak page title
- tweak tests to apply these changes
Also atomicupdate files have been updated. Issues with delete and tests
is fixed with adding additional schema change file.
To test:
1) Add new restriction type and make it manual.
2) Navigate to patron details page.
3) Add new restriction to patron.
=> Only selectable restriction should be the one
you just created.
Also prove t/db_dependent/RestrictionTypes.t.
Sponsored-by: Koha-Suomi Oy
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Renames ronly to readonly and dflt to is_system.
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Add the missing `.` and switch from `yes/no` to `1/0`.
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch fixes the title ordering and also replaces the breadcrumbs
with the modern nav block equivilent
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds UI to allow CRUD operations on restriction types
Sponsored-by: Loughborough University
Signed-off-by: Benjamin Veasey <B.T.Veasey@lboro.ac.uk>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds a new "modify_patron_restrictions" permission
Sponsored-by: Loughborough University
Signed-off-by: Benjamin Veasey <B.T.Veasey@lboro.ac.uk>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds the new syspref "PatronRestrictionTypes"
Sponsored-by: Loughborough University
Signed-off-by: Benjamin Veasey <B.T.Veasey@lboro.ac.uk>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch corrects the patron categories administration template so
that an extra angle bracket isn't included in the page title on the main
view.
To test, apply the patch and go to Administration -> Patron categories.
The page title should read:
Patron categories › Administration › Koha
...with no extra "›" at the beginning.
Check that other views (new, edit, delete) are unaffected.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds a new vendor_type field when creating/editing vendors
and displays the field on search and details for a vendor
To test:
1 - Apply patch, update database
2 - Edit/create a vendor in acquisitions
3 - Note new 'Vendor type' field, free text in editor
4 - Save a value
5 - Confirm it displays in vendor search results and vendor main page
6 - In Authorised values add a new value to 'VENDOR_TYPE' category
7 - Confirm the description of VENDOR_TYPE shows and makes sense
8 - Add/Edit a vendor, note the vendor type is now a dropdown selection
9 - Save with a value
10 - Confirm the description shows in results and vendor page and vendor details
Signed-off-by: Caroline <caroline.cyr-la-rose@inlibro.com>
Signed-off-by: KIT Library Germany <michaela.sieber@kit.edu>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The idea rely on the KohaDates TT plugin for the date formatting. We
should not have any output_pref calls in pl or pm (there are some
exceptions, for ILSDI for instance).
Also flatpickr will deal with the places where dates are inputed. We
will pass the raw SQL value (what we call 'iso' in Koha::DateUtils), and
the controller will receive the same value, no need to additional
conversion.
Note that DBIC has the capability to auto-deflate DateTime objects,
which makes things way easier. We can either pass the value we receive
from the controller, or pass a DT object to our methods.
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
There was a disparity between module codes and how it was used to
construct ID's for various elements.. this patch updates ID's to match
codes for circulation and illrequests.
Signed-off-by: Andrew <andrewfh@dubcolib.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch enabled scrolling directly to the correct table configuration when clicking the 'Configure this table'
button from any KohaTable/kohaTable table in Koha.
Test plan
1. Navigate to Administration > Cities
2. Click 'Configure this table'
3. Confirm the result is the table settings page and you are scrolled to
the cities table configuration
Signed-off-by: Andrew <andrewfh@dubcolib.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch updates the column settings page to use ID's instead of
Indexes to restor the open accordian card after a setting change.
Test plan
1 Go to Administration -> Table settings.
2 All panels should be collapsed.
3 Test expanding and collapsing panels to confirm it's working
correctly.
4 Make a change to one of the table configurations. After clicking
"Save" the page should reload with the same panel expanded.
Signed-off-by: Andrew <andrewfh@dubcolib.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
We should not generate the report if the job hasn't started yet
Test plan:
Stop the koha-worker processes, modify a new item using the batch mod
tool, then see the detail page of the job
Without this patch an error is generated:
Can't use an undefined value as an ARRAY reference at /kohadevbox/koha/Koha/BackgroundJob/BatchUpdateItem.pm line 175
Signed-off-by: Andrew <andrewfh@dubcolib.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Sponsored-by: Orex Digital
Signed-off-by: Orex Digital <info@orex.es>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To test:
1 - Enable DumpSearchQueryTemplate
2 - Confirm you can find the search query in the HTML as a comment
3 - Enable other template dump preference
4 - Confirm they work as before
5 - Confirm new description of preference makes sense
Signed-off-by: Andrew Fuerste-Henry <andrewfh@dubcolib.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The subfield code field became editable in framework
editor due to a regression that happened during the
switch from a previous template framework koha used
to the new Template toolkit framework currently in use:
Bug 5917 : Swapping templates over (5884fb1000)
The regression happened due to the template syntax
not being updated to the new one in this particular
case.
Note: The subfield code field doesn't align with the
other fields anymore after this patch. However,
this alignment issue is in every other Koha form
in intranet and should be fixed in the global
CSS rules.
1) Apply patch
2) Browse to
/cgi-bin/koha/admin/marc_subfields_structure.pl?op=add_form&tagfield=995&frameworkcode=AR
3) Notice the subfield code is non-editable
4) Notice the subfield code is still editable in the New tab.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch hides the Article requests column in the large circulation
rules table when the ArticleRequests system preference is disabled.
To test:
0) Apply patch
1) With ArticleRequests disabled, go to Administration > Circulation and fines
rules
2) Scroll right in the first table
--> There isn't any mention of article requests in the table
3) Scroll down to see the other tables in the page
--> There are no other article requests tables
4) Enable ArticleRequests in Administration > System preferences
5) Go back to the Circulation and fines rules and refresh the page
6) Scroll right in the first table
--> There should be an article requests yes/no column
7) Scroll down to see the other tables in the page
--> There are other article requests tables, Default open article requests
limit and Default article request fees
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
We need to take the pref CalendarFirstDayOfWeek into account to display
the days on the curbside pickups admin page.
Test plan:
Turn on the CurbsidePickup pref
Set CalendarFirstDayOfWeek to Sunday
Go to the curbside pickups admin page, add new slots, and confirm that
Sunday is displayed first.
Try again with CalendarFirstDayOfWeek set to Monday and Saturday.
Sponsored-by: Association KohaLa - https://koha-fr.org/
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Sponsored-by: Montgomery County Public Libraries
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To test:
1 - Update ComponentSortField system preference and verify biblionumber is an option
2 - Repeat test plan from 30327 and confirm sorting with biblionumber works
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The YAML preference definition defines it as a string ('yes' or 'no' the
possible values). And the opac-suggestions.tt template has one occurence
of the variable being compared to a string.
This patch does:
- fix the template
- fixes opac.pref for 0|1
- adds an atomicupdate that takes care of moving 'yes' and 'no' to their
respective boolean values.
To test:
1. Change the syspref value to enable/disable
2. Check on the DB that the value is wrong:
$ koha-mysql kohadev
> SELECT value FROM systempreferences WHERE variable='OPACSuggestionAutoFill';
=> FAIL: It is either 'yes' or 'no' depending on what you choose.
3. Apply this patch
4. Run:
$ updatedatabase
5. Repeat 2
=> SUCCESS: Values are now 0 or 1
6. Sign off :-D
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Aleisha Amohia <aleishaamohia@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To test:
1. Apply patch, updatedatabase, restart_all
2. Search for the system pref 'IntranetAddMastheadLibraryPulldown'
3. Set it to 'Show'.
4. Go to any page that contains header search box and click on 'Search
the catalog'.
5. To the left of the search bar you should see a dropdown for branches.
6. This should be defaulted to 'All libraries'.
7. In the dropdown choose any branch and do a search and make sure it is
correctly limiting to that branch.
8. Try changing to a different branch and doing another search. It
should correcrly limit to that branch BUT it should also default back
to 'All libraries' for the next search.
9. Try selecting 'All libraries' from the top of the dropdown and make
sure it is correctly searching all branches.
10. Turn on the system pref 'IntranetCatalogSearchPulldown' and make
sure it looks nice with both of those dropdowns and functions when
you use limiters from both dropdowns.
Signed-off-by: Sally <sally.healey@cheshiresharedservices.gov.uk>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Moved the installer to pl file
Adjusted capitalization / reply-to
Fix tests by importing needed fuction and adjusting a wrong call
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch removes a duplicated stanza left form moving routine
Changes the routines to use inbound_library_address
Improves the display if the system preferences
Updates the update file
Moves smaple notice
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Right now, if a library automatically cancels expired waiting holds, a
librarian must still re-checkin an item to trap the next available hold
for that item. It would be better if the next hold was automatically
trapped and the librarians receive an email notification so they can
make any changes to the item if need be ( hold area, hold slip in item,
etc ).
Test Plan:
1) Apply this patch
2) Run updatedatabase.pl
3) Create a record with one item
4) Place two holds on that record
5) Check in the item and set it to waiting for the first patron
6) Set ReservesMaxPickUpDelay to 1
7) Enable ExpireReservesMaxPickUpDelay
8) Enable ExpireReservesAutoFill
9) Set an email address in ExpireReservesAutoFillEmail
10) Modify the holds waitingdate to be in the past
11) Run misc/cronjobs/holds/cancel_expired_holds.pl
12) Note the hold is now waiting for the next patron
12) Note a waiting hold notification email was sent to that patron
13) Note a hold changed notification email was sent to the library
Signed-off-by: Victoria Faafia <vfaafia29@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
There are 5 fields that are not set if no value is provided when saving/editing a rule in Administration->Circulation and fines rules
- issuelength
- hardduedate
- unseenrenewalsallowed
- rentaldiscount
- decreaseloanholds
This is problematic because it gives the impression these rules are set as blank, but in reality they don't exist and the rule will fal back to the higher level
To test:
1 - Set a rule for
Patron category: Teacher
Itemtype: All
Hard due date: (Today)
Lona period: 10
2 - Set a rule for
Patron category: Teacher
Itemtype: Books
Hard due date: (leave blank)
Loan period: 10
3 - Expected behaviour is Book item will checkout to teacher for 10 days, all other types will be due yesterday at 25:59:00
4 - Checkout an non-book item type to teacher
5 - Hard due date applies
6 - Checkout a 'book' item type to teacher
7 - Hard due date applies - FAIL
Signed-off-by: Caroline Cyr La Rose <caroline.cyr-la-rose@inlibro.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds handling for the waiting_hold_cancellation circulation
rule. It is set no 'No' by default in the atomic update, if not
previously set.
Handling in the rules editor is added, in its own section.
To test:
1. Apply this patch
2. Run:
$ updatedatabase
=> SUCCESS: All good
3. Verify that the syspref is set:
$ koha-mysql kohadev
> SELECT * FROM circulation_rules WHERE rule_name='waiting_hold_cancellation';
=> SUCCESS: Set to 0
4. Play with the rules editor, changing things back and forth, things
should work, including library-specific and global/defualt settings.
=> SUCCESS: It works
=> SUCCESS: Texts are idiomatic
5. Sign off :-D
Sponsored-by: Montgomery County Public Libraries
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
And add a missing space between the time and icon
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Sponsored-by: Association KohaLa - https://koha-fr.org/
Signed-off-by: Koha Team University Lyon 3 <koha@univ-lyon3.fr>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This is the main commit message.
A plugin already exists to manage curbside pickups. This new
enhancehemnt is suggesting an implementation that is ready to be integrated
into Koha core in order to provide the feature out-of-the-box.
What has been done in this patch set:
- Deal with installations using the existing plugin (upgrade the DB schema and migrate their data)
- Add a new syspref (CurbsidePickup) and two new permissions:
* parameters.manage_curbside_pickups
* circulate.manage_curbside_pickups
- Add an administration page to setup the configuration: admin/curbside_pickup.pl
- Add a circulation page to manage the existing pickups, and create new one
- Add a new OPAC view "your curbside pickups" to let patron manage their pickups, and create new ones
- Add link from the "member" toolbar
Improvements compared to the plugin:
- Ability to create several pickup windows per day
- Better display of the pickup times (not in a dropdown list)
- Ability to disable pickups for patrons without waiting holds
- Display pickups on the patron circulation page
- Display pickups of the library on the homepage
- Prevent pickup to be created on a holiday
- Better error handling (exceptions)
- Unit tests
More improvements are already planned, see related bug reports.
Test plan:
After you setup the feature correctly from the administration view, you
will be able to use the schedule curbside pickups from the staff
interface, and from the OPAC interface if you selected "patron-scheduled
pickup"
A. Staff interface
1. Go to Circulation > Curbside pickups
=> If the logged-in user has the circulate.manage_curbside_pickups
permission you will be able to create and manage curbside pickups
2. Go to a patron detail page and click the "Schedule pickup" button in
the toolbar
3. If the patron has waiting holds and you selected "Enable for waiting holds only",
of if you didn't select the option, you will be able to select a pickup
date and slots to create a pickup.
4. Confirm that you cannot create more pickups per slot than what you
defined in the curbside pickup configuration for this library
5. Confirm that you cannot create a pickup if the feature is disabled
for the library
6. Notice that you can mark the pickup as "stage and ready", then
"patron is outside" and finally "delivered today". You can also rollback
the change
7. Notice that once the pickup has been marked as delivered, the
item has been checked out and that a new notice has been generated (if
the patron has "Hold_Filled" in their messaging preferences
8. Confirm that the information about current pickups is displayed on
the circulation page of the patron
B. OPAC interface
1. Create a new curbside pickup from the OPAC
2. Confirm that the same limitations as from the staff interface are in
effect (waiting holds, number of patron per slots, etc.)
3. Confirm that you can cancel a pickup and alert staff of you arrival
4. Confirm that you cannot cancel a pickup that has been delivered
already
Sponsored-by: Association KohaLa - https://koha-fr.org/
Signed-off-by: Koha Team University Lyon 3 <koha@univ-lyon3.fr>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Sponsored-by: Association KohaLa - https://koha-fr.org/
Signed-off-by: Koha Team University Lyon 3 <koha@univ-lyon3.fr>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds a new page in the administration area to manage curbside
pickups.
Test plan:
1. Enable the new CurbsidePickup syspref
2. Go to Administration > Curbside pickups
=> If the logged-in user has the manage_curbside_pickups permission you
should see the administration view
3. Enable the feature for some libraries and configure it.
a. You must define a "pickup interval" and a "maximum patrons per interval"
values.
b. If "Patron-scheduled pickup" is enabled, patrons will be able to
schedule curbside pickups from the OPAC
c. If "Enable for waiting holds only" is enabled, only patron with waiting
holds will be allowed to schedule curbside pickups
d. In the bottom part of the form you can define the slots available for
curbside pickups.
e. Save
Sponsored-by: Association KohaLa - https://koha-fr.org/
Signed-off-by: Koha Team University Lyon 3 <koha@univ-lyon3.fr>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Sponsored-by: Association KohaLa - https://koha-fr.org/
Signed-off-by: Koha Team University Lyon 3 <koha@univ-lyon3.fr>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Sponsored-by: Association KohaLa - https://koha-fr.org/
Signed-off-by: Koha Team University Lyon 3 <koha@univ-lyon3.fr>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch avoids escaping HMTL data in the additional fields section.
To test:
1. Open the additional fields section
http://kohadev-intra.mydnsname.org:8081/cgi-bin/koha/admin/additional-fields.pl
=> FAIL: there are some nasty <span> </span> texts in there
2. Apply this patch
3. Reload
=> SUCCESS: Things display nicely again!
4. Sign off :-D
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Emmanuel Bétemps <e.betemps@gmail.com>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch enables use of DataTables' built-in session storage of table
configurations. DataTables by default uses the browser's localstorage
feature to store the state of each DataTable, including which columns
have been hidden by the user.
Our table settings system has always overridden this saved state. This
patch adds a check for a saved configuration state and if present loads
the saved state instead of the default state.
The system is enabled in this patch on the libraries administration
page. To test, apply the patch and open go to Administration ->
Libraries.
- Use the "Columns" button to change the visibility setting of multiple
columns.
- Navigate away from the page and then back to test that the visibility
settings have been kept.
- Go to Administration -> Table settings -> Administration and change
the visibility settings for the "libraries" table in a way that it
differs from the visibility settings you set manually.
- Return to the libraries administration page and confirm that your
manual settings are still being loaded instead of the defaults from
table settings.
Signed-off-by: Solène Desvaux <solene.desvaux@biblibre.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds a note in the description of FacetLabelTruncationLength
that it only works with Zebra.
To test:
0) Apply patch
1) Go to Administration > Global system preference > Searching
preferences
2) Search for FacetLabelTruncationLength
3) Read the description, make sure it indicates that is requires Zebra
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds a new system preference to allow systems librarians the
option to pick wich address to use for overdues notices.
We default to 'cron' to allow existing uses of '--frombranch' on the
command line to continue to function but now allow end users to override
this option via the new OverdueNoticeFrom preference.
Signed-off-by: Caroline Cyr La Rose <caroline.cyr-la-rose@inlibro.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Test plan:
Look up pref OPACSearchForTitleIn.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To test:
1 - Browse to 'Administration->Circulation and fines rules'
2 - Make sure you are editing 'Standard rules for all libraries'
3 - Set 'Lost item fee refund on return policy' to 'Refund lost item charge and charge new overdue fine'
4 - Swtich to edit rules for a specific library, click on the dropdown for 'Lost item fee refund on return policy' and note default says 'Use default (Refund lost item charge and restore overdue fine)'
5 - Switch default/all libraries rule to 'Refund lost item charge and restore overdue fine'
6 - On specific branch note the default option is now 'Use default (Refund lost item charge and charge new overdue fine)'
7 - Apply patch and repeat, note the default descriptions now display correctly
Signed-off-by: Sally <sally.healey@cheshiresharedservices.gov.uk>
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
There is a flaw when subfields are ordered, the inputs are not retrieved
correctly.
We should not rely on the order but use an id instead.
Test plan:
Create, edit subfields
Modify values from the different subfields
Confirm that values are correctly saved
Signed-off-by: Thibault Kero <thibault.keromnes@univ-paris8.fr>
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Bug 28373 added system preference PassItemMarcToXSLT is referenced is all XSLT system preferences.
But it only applies on results pages.
The only use in perl code is in C4::Search :
> $marcrecord->delete_fields( @fields ) unless C4::Context->preference('PassItemMarcToXSLT');
I've tested by adding in all XSLT files :
<strong>ITEMS <xsl:value-of select="count(marc:datafield[@tag=952])"/> </strong>
Number of items only appears in OPAC and staff interface results pages.
In fact only search pages get MARC record from search engine, in which items datas have been embedded for indexing.
In other pages MARC record does not embed items datas.
This patch adds "MARC21 952, UNIMARC 995" to be explicit we talk about
MARC datas not item tags build in XML recieved by XSLT.
Test plan :
1) Apply patch
2) Search for PassItemMarcToXSLT in system preferencies
3) Look at description of PassItemMarcToXSLT
4) Check PassItemMarcToXSLT only apprears in OPACXSLTResultsDisplay and XSLTResultsDisplay
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Test plan:
View the pref on the System preferences, Patrons tab.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds a syspref 'ListOwnershipUponPatronDeletion' which
decides if all the owner's lists (public and private) are deleted
when the owner is deleted, or if the ownership of their public and
shared lists are transfered to the user who deleted the owner (private
lists that are not shared are always deleted).
To test:
1) Apply patch and update database
2) Set the ListOwnershipUponPatronDeletion syspref to 'Transfer...'
3) Set up a superlibrarian user
4) Log in as this superlibrarian user and set up three lists, a public
list (maybe named 'public'), and two private lists (named 'private' and
'shared')
5) Log in as this user to the opac (if you haven't already) and share
the 'shared' list with someone
6) View the virtualshelves table in mysql to see the three lists you
just created under your new user
7) Also view the virtualshelfshares table in mysql to see the 'shared'
list
8) Log into the staff client with your regular user (a different user to
the one you just created)
9) Search for the user you just created and delete them
10) Go to your lists
11) You should see the 'shared' list under your private lists, and their
'public' list under your public lists, both with you as the owner
12) if you view both the virtualshelves table and the virtualshelfshares
table in mysql again, youll see you are now the owner and the 'private'
list will no longer exist.
13) Set the ListOwnershipUponPatronDeletion syspref back to 'Delete...'
14) Repeat steps 3 - 10 again (it may help to delete the 'shared' and
'public' lists before you re-create them)
15) You should not see any of the lists you just made under private or
public lists this time. To confirm, check the virtualshelves table in
mysql and make sure that all three lists have been deleted.
Sponsored-by: Catalyst IT
Signed-off-by: Cédric Vita <cedric.vita@dracenie.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
2022-06-08 Removed old atomic update. See new follow-up.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
When defining our sort fields in we defined all as 'numeric'
For other string containing numbers this is likely correct, however,
for callnumbers it is not. e.g. E45 should sort before E7
This patch adds a new 'callnumber' type and deifnes this for cn-sort and
adds to the field maping a sort without numeric set
To test:
0 - Be using ES with Koha
1 - On records with single item, add callnumbers:
VA65 E7 R63 1984
VA65 E7 T35 1990
VA65 E45 R67 1985
2 - Add public note 'shrimp' or something to make them easily searchable as a group
3 - Search for 'shrimp', sort by callnumber
4 - Note E45 comes last, it should come first
5 - Apply patch
6 - Reset ES mappings
7 - Reindex ES
8 - Repeat search
9 - Sorting should be correct when set to callnumber
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Michal Urban <michalurban177@gmail.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
As suggested by Katrin, adding a warning to the system preference that
this has an effect on SIP configurations that needs to be understood.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Move the preferences into a section under 'Circulation' called 'Item
bundles'
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch updates the circulation system to account for bundle
checkins. We add a content verification step to ensure bundle content is
all present at checkin and we use this comparison to mark missing items
as lost.
Test plan
0) Apply patches up to this point
1) Checkin an item that belongs to a bundle
* An alert should be triggered noting that the item belongs to a
bundle
* The option to remove the item from the bundle should be clear
* Click remove should result in the alert dissapearing and the item
having been removed from the bundle.
2) Checkin an item bundle
* A modal confirmation dialog should appear requesting each item
barcode be scanned
* As items are scanned they should be highlighted in yellow in the
bundle content table
* Upon submission;
* The user will be alerted to any unexpected items that were
scanned and told to put them to one side.
* The user will be alerted that any missing items in the validation
will have been marked as lost.
* The bundle item will be marked as checked in.
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds methods the the Koha::Item object for managing item
bundling operations and then exposes those methods via the REST API.
We include the new `BundleNotLoanValue` preference for setting not
for loan values when an item is added to a bundle.
Finally, we expose bundle management via the catalogue details page.
Test plan:
0) Apply patches up to this point and run the database update
1) Configuration: `BundleNotLoanValue` should have been set by the
database update and point to a newly added AV value.
2) Creating a new bundle
* Add a new bib record
* Mark the bib record as a 'collection' type by setting leader
position 7 to 'c'
* Add a new item to this bib record
* You should see a new 'Manage bundle' button available in the
'Actions' column of the Holdings table.
* Clicking 'Manage bundle' should expand the table to include a new
row directly beneath this one.
* Use the new 'Add to bundle' button that appears in this row to
trigger a modal that allows entering the barcode of items you wish
to add to the bundle
* Upon closing the modal, the bundle content table should reload and
contain your newly associated items.
* You can subsequently remove an item from a bundle using the new
'Remove' button.
3) Not for loan
* Items that have been added into a bundle should now appear as 'Not
for loan' from their original biblio record and note which bundle
they belong to.
4) Error cases
* Try adding an item that already belongs to a bundle to another
bundle: Note an error is displayed in the modal form.
5) The bundles feature can be disabled by unsetting the
`BundleNotLoanValue` system preference.
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This commit adds a different message when cloning circulation and fine rules if you use the Standard rules for all libraries option.
Test plan :
1. Go to the Circulation and fine rules page in the Admin tab.
2. Check that the 'Select a library' menu is on 'Standard rules for all libraries'.
3. Check that you also have some random rules to clone, or create some.
4. Clone these rules to the library of your choice.
5. Confirm that the message 'Clone circulation and fine rules from "" to (library of your choice)' appears.
6. Now clone rules from a specific library to another one, and repeat steps 3-4.
7. Confirm that this time, the message will displays both libraries properly.
8. Apply patch.
9. Repeat steps 2 to 4 and 6 to 7. Confirm that this time, the message in the first case will be 'Cloning circulation and fine rules to "(library of your choice)"'.
10. Kindly sign off.
Signed-off-by: Emmanuel Bétemps <e.betemps@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Add additional clarifcation, format NOTE: similar to most other
notes in system preferences (bold, start on a new line), and link
to other system preferences mentioned.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
TEST PLAN:
1. On the Admin page, navigate to Koha Administration > Global System
Preferences
2. Search for OPACMandatoryHoldDates
3. In the Value field, check that it now says On the "Placing a hold"
form, instead of opac-reserve form.
Sponsored by Catalyst IT
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Changes:
* branch to library
* staff client to staff interface
* adds an ending .
To test:
- Compare system preference descrpition before and after the
patch was applied.
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To test:
1. Go to the admin page.
2. Search for the above preference.
3. Confirm that "Will" is now spelled correctly.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds a view page for libraries, so that the user isn't
required to edit the library to see information about it.
To test, apply the patch and log into Koha as a user with permission to
manage libraries.
- In the list of libraries you should see that the library name in the
first column is now a link.
- When you click the link you should be taken to a view of all the
information about the library.
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds two new sysprefs:
ComponentSortField
ComponentSortOrder
These allow the user to choose how components should be sorted when displaying on the details page
of a record, and the corresponding search for all components
This also updates our search from simple_search_compat to search_compat to allow for sorting options
Note:
Some sorting under ES is unclear - this is a separate issue to be invesitgated
Our Zebra index does not offer 'record number' sorting, I will file a bug for that
To test:
1 - Enable UseControlNumber (or not)
2 - Add some components to a record by control number or title depending on above
3 - Enable ShowComponentRecords syspref
4 - View the record that has components
5 - Note they are not sorted
6 - Apply patch, updatedatabase
7 - reload record
8 - Note components are sorted by title ascending
9 - Try different values for ComponentSortField and ComponentSortOrder
10 - Confirm sorting changes with system preferences
11 - Repeat test on staff and opac, with ES and Zebra search engines
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The construct of [% ELSE %]0[% END %] breaks translations as it is
translated as [% ELSE %][% END %]. Note: No 0 in the ELSE statement.
This patchset either removes occurances of a lone 0 in template ELSE
statements, or splits it over multiple lines so the 0 is not removed in
the translated templates.
Test plan:
1. Install the en-NZ translation
2. Search the translated templates for '[% ELSE %][% END %]' and confirm
there are are instances of that
3. Apply patch
4. Update your en-NZ translation
5. Repeat step 2 and confirm there are no more instances of [% ELSE %][%
END %] in the translated templates
Note: I removed the [% ELSE %] statement from opac-bottom.inc as that
statement was empty in the en translation so it didn't look to be
needed.
Sponsored-by: Catalyst IT, New Zealand
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
