Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
From tht YAML pod:
"""
This module has been released to CPAN as YAML::Old, and soon YAML.pm will be changed to just be a frontend interface module for all the various Perl YAML implementation modules, including YAML::Old.
If you want robust and fast YAML processing using the normal Dump/Load API, please consider switching to YAML::XS. It is by far the best Perl module for YAML at this time. It requires that you have a C compiler, since it is written in C.
"""
See also
https://gitlab.com/koha-community/qa-test-tools/-/merge_requests/35
Test plan:
Try some place where YAML::XS is not used and confirm that it works
correctly
QA note: This patch removes some uses of YAML that were not useful
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Joonas Kylmälä <joonas.kylmala@helsinki.fi>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch add the ability to modify the attribute "repeatable" and
"unique_id" for a patron's attribute type.
Prior to this patch it was not possible, to keep data integrity.
When editing an attr type, the controller will check is the value can be
modified, depending on the existing patron's attributes.
Test plan:
0/ Setup
Create 1 patron attribute PA1 that can be repeatable
Create 1 patron attribute PA2 that does not have the unique restriction
Create 1 patron attribute PA3 that cannot be repeatable and does not
have the unique restriction
1/
Edit them and confirm that you can modify the repeatable and unique
restrictions
2/ Restore values from 0.
Create a patron P1 with several PA1, PA2=42 and whatever in PA3
3/ Edit PA1 => you cannot remove the repeatable flag but can still
remove the unique
4/ Create a patron P2 with PA2=42
5/ Edit PA2 => you cannot add the unique flag
Play a bit more with the different combinaisons and confirm that it
works as advertised.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Preferences of the "Holds to pull" table missing the "Barcode" column.
This patch appends that column name to the "column_settings.yml"
in correct order. This also led to checked out columns in this settings
page that were not those which were hidden when the table displayed
(i.e. columns were shifted).
To reproduce:
1) Head over to /cgi-bin/koha/admin/columns_settings.pl
2) Open the collapsed "Circulation" list, go to the "Holds" page
and find preferences of the "Holds to pull" table there.
3) Check that the "Barcodes" column is missing from it.
4) Mark the last few columns for not to be
displayed (for example, three) and save the preferences.
Remember the column names you checked out.
5) Open the circulations section, then open "Holds to pull" report
when you have there some elements displayed, you should notice that
hidden columns shifted by one, as well if you press "gear" icon to
quickly enable/disable the columns, you will see those unchecked in
list last three will be not those you marked out.
6) Apply the patch.
7) Reload the "table settings" page, check that the "Barcodes"
column is present.
8) Check that on the "Circulation -> Holds to Pull" page all
columns hidden accordingly and properly (as explained in step 5.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Bug 22844 Added the option to provide a modal for selecting database columns for system preferences
Some system preferences are limited to a subset of the columns allowed. For instance, setting branchcode
in BorrowerUnwantedFields prevents adding new patrons
This patch allows for defining exclusions in the .pref file
To test:
1 - Alter BorroweUnwantedFields and select branchcode
2 - Attempt to add a new patron
3 - Get a message like "Something went wrong. Check the logs"
4 - Apply patches
5 - Alter the preference again
6 - Note that branchcode is unchecked and disabled
7 - Save the pref
8 - Add a patron
9 - It succeeds
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Bug 17364: (follow-up) Add missing filter
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
There was another mention of the old system preference name in the
budget planning code. This patch replaces it with the new name.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
It'd be great if the Search Engine Configuration page would display
the various aliases (shortcuts) available : ti for title, sn for local-number, etc.
Patch changes Koha/SearchEngine/Elasticsearch/QueryBuilder.pm to move
hard-coded vars at the beging and adds a method to provide to %index_field_convert via a method.
Test plan :
1) Use Elasticsearch
2) Go to Administration > Search engine configuration (Elasticsearch)
3) Check you see new column 'Aliases' with for example ti for title.
4) Perform a search 'ti:<title>' and check you get results
Signed-off-by: Séverine QUEUNE <severine.queune@bulac.fr>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Those two strings are not translatable as they are passed from the
controller.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Search engine administration is very important,
we should log who/when it is changed.
I don't add a preference system to disable it,
like there is no for preference system logs.
Test plan :
1) Use searchengine Elasticsearch
2) Go to Administation > Search engine configuration (Elasticsearch)
3) Click on 'Reset Mappings' and accept
4) Edit some lines and save
5) Go to 'Tools' > 'Log viewer'
6) Select only 'Search engine' in Modules and submit
7) Select only 'Edit mappings' in Actions
8) Check you see a log
9) Select only 'Reset mappings' in Actions
10) Check you see a log
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
With Elasticsearch 6 (>6.4), we have a warning on index creation :
the default number of shards will change from [5] to [1] in 7.0.0
See https://github.com/elastic/elasticsearch/pull/30587
I propose to add number_of_shards in index config.
Also add number_of_replicas that is better explicit.
In case on only one node, it must be 0.
Test plan :
1) Use Elasticsearch
2) Apply patch and flush memcached
3) Rebuild indexes : misc/search_tools/rebuild_elasticsearch.pl -v -b -d
4) Check you dont have a warning about number of shards
5) Check the settings of index :
curl '<cluster>:9200/<myindex>_biblios/_settings?pretty&filter_path=**.number_of_*'
6) You should see :
"number_of_shards" : "5",
"number_of_replicas" : "1"
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds the ability to set the "Unseen renewals allowed" value
in the circulation rules
Signed-off-by: Sally Healey <sally.Healey@cheshirewestandchester.gov.uk>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds two new sysprefs. 'ILLDefaultEmail', 'ILLSendStaffNotices' and a new column to the
branches table called 'branchillemail'. It also adds five ILL related
notices.
Here we are providing the ability for a branch to have a dedicated email
address for it's ILL staff, the idea being that any notices sent by ILL
to staff need to go to specific staff, rather than the general branch
email address. If no branch specific address is defined, the address
specified in the ILLDefaultEmail syspref is used.
We're also providing a syspref 'ILLSendStaffNotices' to allow the user to specify which
notices should be sent to staff upon certain events.
We are also providing patron messaging preferences for the two patron
bound notices
We are also providing five notices for various ILL related events.
Sponsored-by: PTFS Europe
Signed-off-by: Niamh Walker-Headon <Niamh.Walker-Headon@it-tallaght.ie>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
To test:
1) Apply patch, update database, restart services
2) Enable decreaseLoanHighHolds sysprefs if not already active
3) Go to circulation rules and set a value under 'Decrease loan holds
(day)' that is DIFFERENT from decreaseLoanHighHoldsDuration
4) Check out an item with holds and confirm that the value from the rule
is used instead of the system preference
5) Confirm tests pass before and after the patch
t/db_dependent/DecreaseLoanHighHolds.t
Sponsored-by: Catalyst IT
Signed-off-by: Lisette Scheer <lisetteslatah@gmail.com>
Signed-off-by: Henry Bolshaw <bolshawh@parliament.uk>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds handing for the new values available for the lostreturn
policy settings.
* undef - Do nothing, leave fees and fines as they were at the point of
lose.
* refund - Refund the lost item fee only
* charge - Refund the lost item fee and charge a fresh overdue fine
dated for a return on the date the item is 'found'
* restore - Refund the lost item fee and restore the original overdue
fine (dated for a 'return' on the date the item was 'lost'
Test plan
1/ apply patch
2/ updatedatabase, restart_all
3/ verify finesmode and CalculateFinesOnReturn and WhenLostChargeReplacementFee are on
4/ verify WhenLostForgiveFine is set to "Forgive"
5/ verify circ rules include fines
6/ set Default lost item fee refund on return policy to "Refund lost item charge"
7/ create 4 overdue checkouts that will incur fines
8/ run fines.pl
9/ confirm 4 items checked out with accruing fines
10/ confirm all 4 items have a replacement price
Item 1
11/ mark the first item lost
12/ verify that fine is gone and lost fee has been charged
13/ check item in
14/ verify that lost fee is gone and overdue charge has not returned
Item 2
15/ set Default lost item fee refund on return policy to "Refund lost item charge and charge new overdue fine"
16/ mark second item lost
17/ verify that fine is gone and lost fee has been charged
18/ check item in
19/ verify that lost fee is gone and a new overdue charge has been made
Item 3
20/ set Default lost item fee refund on return policy to "Refund lost item charge and restore overdue fine"
21/ mark third item lost
22/ verify that fine is gone and lost fee has been charged
23/ check item in
24/ verify that lost fee is gone and the old overdue charge has been restored
Item 4
25/ set Default lost item fee refund on return policy to "Leave lost item charge"
26/ mark fourth item lost
27/ verify that fine is gone and lost fee has been charged
28/ check item in
29/ verify that lost fee remains and the overdue charge is still gone
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This alters the template check to use the presence of the plugins
arrayref rather than requiring a second call to check for
plugins_enabled.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Test Plan:
1) Install an EDI plugin
2) Browse to edi_accounts.pl, create or edit an account
3) Note the plugins pulldown is missing
4) Apply this patch
5) Restart all the things!
6) Reload the page
7) Note the pulldown is back!
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This adds the items.copynumber to the checkouts table in the
patron account in the staff interface.
To test:
- Apply patch
- Check out some items with and without copy number in the item
to any patron
- In the checkouts table on the Checkouts and Details tabs:
- Verify that a new column shows 'copy no' shows after 'call no'
- Verify the information displays correctly
- Verify that the column configuration settings for the new column works
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This adds a new 'Price' column to the acqusition details tab.
To test:
- Apply patch
- Add one or more orders for a record.
- Before closing the basket: go to the detail page in the catalog
- Verify that the price estimated/budgetet price now shows in a new column
- Add actual cost to the basket or close the basket and receive the item
- Verify the column now shows the updated actual cost
- Verfy the tooltip on the table heading works
- Verify the column configuration for the new column works as well
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
The table currently displays the fund, but as late orders can be
from a past budget with the same fund names, this can be confusing.
So adding the budget in addition to the fund will be helpful.
To test:
- Add a basket and an order, close the basket
- Go to the late oder page
- Make sure your order shows up there
- Apply the patch
- Reload the late orders page
- Verify a new column budget shows in the table
- Verify the table configuration settings work for the new column
- Run t/db_dependent/Koha/Acquisition/Fund.t
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
To test:
1 - Apply patch
2 - ./installer/data/mysql/updatedatabase.pl
3 - Reset ES mapping: Administration->Search engine configuration , button at bottom of page
4 - 'issues' and 'title' mapping under 'search fields' should be mandatory and not editable
5 - On 'Bibliographic records' tab you should not be able to delete the single entry for issues
6 - You should be able to delete 'title' mappings, however, at the final one you should be stopped by javascript
7 - Bonus: force remove the last mapping from the page using developer tools - attempt to save and should be warned of missing mandatory mapping
Signed-off-by: Nicolas Legrand <nicolas.legrand@bulac.fr>
Signed-off-by: Bouzid Fergani <bouzid.fergani@inlibro.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
At the moment the pages falsely check for parameters_remaining_permissions,
but they should check the specific manage_accounts permission.
To test:
- Create a new staff user with only catalog and manage_acccounts
permissions
- Log in with this staff user and go to the admin page
- You will see the debit and credit type sections, but won't be
able to access them
- Apply the patch
- Veriy the links still show, but pages are now accessible
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
In admin/searchengine/elasticsearch/mappings.yaml the search field not-onloan-count is defined for MARC21 on 999x.
This should be for all the MARC flavours, like in Zebra config.
Test plan:
1) On a UNIMARC database
2) Reset Elasticsearch mappings
3) Check search engine config to see field 'not-onloan-count' on 999$x
4) Same on a NORMARC database
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
The new column can now be hidden by the table settings
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Currently, the 'Default checkout, hold, and return policy' have a conditional to blank
'holdallowed' when not set, but other rules don't get the same treatment
This patch uses the existing hash that controls the scope of rules and adds a
new parameter 'can_be_blank' Default is assumed to be true, can_be_blank, but if set to '0' then
blank rule values will not be save to the database
To test:
0 - Set CircControl to 'the library the item is from'
1 - Goto to Admin -> Circulation and fines rules and select a library
2 - Under "Default checkout, hold, and return policy" set:
Total current checkouts allowed: 1
Hold policy: Not set
Hold pickup library match: Not set
Return policy: Not set
3 - Save the rule
4 - Check the DB
SELECT * FROM circulation_rules WHERE branchcode = 'BRANCHCODE'
using the branchcode for the library you chode
5 - Note returnbranch, and hold_fulfillment_policy rules exist with blank value
6 - Set 'All libraries'->'Default checkout, hold and return policy'->'Item floats'
7 - Checkin an item from the library with blank rules at another library
8 - It returns home rather than floating
9 - Apply patch and restart all the things
10 - Reload the page and save the rules as before
11 - Check the DB and note the rules no longer exist
12 - Check in the item, it floats!
13 - prove -v t/db_dependent/Koha/CirculationRules.t
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This was not accurate as it was only retrieving jobs for batch_biblio_record_modification
We will need to improve that later if needed
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Also remove "authnotrequired => 0,"
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
A owner of a job should be able to see the progress of this job.
Signed-off-by: David Cook <dcook@prosentient.com.au>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
QA: Please answer the question in admin/background_jobs.pl
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: David Cook <dcook@prosentient.com.au>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This feature has been added recently by bug 18127.
It highlights the need of a post processing hook.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: David Cook <dcook@prosentient.com.au>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
ie. no subscription yet
This needs to be fixed (if possible), or removed from the patchset
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: David Cook <dcook@prosentient.com.au>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: David Cook <dcook@prosentient.com.au>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: David Cook <dcook@prosentient.com.au>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
The "Default configuration" section at the top of the SMTP servers admin page
contains the hardcoded values in Koha::SMTP::Servers->default_setting.
It should be the values from the config (and default to hardcoded values unless defined)
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
The missing piece on this patchset is choosing the desired SMTP server
for each library. This patch adds the option on editing the library.
The default one is picked for existing libraries, and you can pick the
one you want.
To test:
1. Apply the patchset
2. Run:
$ updatedatabase
=> SUCCESS: Things go smooth
3. Notice the new permission for managing SMTP servers
4. Notice the entry in the admin page
5. Add/have a few SMTP servers defined.
6. Edit a library
=> SUCCESS: The 'Default' SMTP server is picked
7. Choose any server and save
=> SUCCESS: Saving doesn't explode
8. Edit the server
=> SUCCESS: Your selection is kept (this can also be checked on the DB,
the library_smtp_server table)
9. Try (7) with many different options
=> SUCCESS: It works
10. Sign off :-D
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch introduces a way to define SMTP servers either globally or
per-library.
To test:
1. Apply this patch
2. Find the SMTP servers entry in the admin page
3. Play with adding/removing SMTP servers
=> SUCCESS: All works as expected
4. Sign off :-D
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This add an 'udated_on' column to the letter table and displays
the information in 'slips and notices'.
To test:
- Apply patch
- Run updatedatabase
Note: the existing letters will all be set to the
currnet date).
- Go to Tools > Notices and slips
- Verify there is a new column "Last updated" in the table
Note: The table will always display the newest change date
of the different message transport types.
- Edit any notice
- Verify the "Last updated" is shown for any transport type
with an existing notice definition
- Edit and add a notice
- Verify the dates are correctly stored
- Test the column configuration for the new column works
correctly
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Hiding the last columns on the fines transactions in the
patron account in staff didn't work correctly as we had missed
adding Home library to the configuration options when it was
added.
This adds the missing definition and now all columns can be
toggled correctly.
To test:
- Go to any patron account in staff
- Go to Accounting > tab transactions (maybe add some fines)
- Toggle the columns on the table using the menu, especially
- notes, home library and checkout date
- Go to Administration > Table configuration
- Verify the settings for the table work well from there too -
with the patch, home_library will show as new option
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
If HoldsQueueSkipClosed is enabled, and a library happens to be closed
on the day you edit the transport cost matrix, all the values for that
library will not show. Instead they will appear disabled, and if you
were to edit the cell and save a new value in it, it will also
'disappear' when the page is reloaded.
Test Plan:
1) Set today as a holiday for a library
2) Set HoldsQueueSkipClosed to 'open'
3) Go to the transport cost matrix editor
4) Edit a cell where the 'from' is for the closed library
5) Note the value doesn't 'save', it is still in the database though
6) Apply this patch
7) Restart all the things!
8) Reload the transport cost matrix editor
9) The value now appears correctly!
Signed-off-by: Lisette Scheer <lisetteslatah@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
