This patch introduces a way to define SMTP servers either globally or
per-library.
To test:
1. Apply this patch
2. Find the SMTP servers entry in the admin page
3. Play with adding/removing SMTP servers
=> SUCCESS: All works as expected
4. Sign off :-D
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This add an 'udated_on' column to the letter table and displays
the information in 'slips and notices'.
To test:
- Apply patch
- Run updatedatabase
Note: the existing letters will all be set to the
currnet date).
- Go to Tools > Notices and slips
- Verify there is a new column "Last updated" in the table
Note: The table will always display the newest change date
of the different message transport types.
- Edit any notice
- Verify the "Last updated" is shown for any transport type
with an existing notice definition
- Edit and add a notice
- Verify the dates are correctly stored
- Test the column configuration for the new column works
correctly
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Hiding the last columns on the fines transactions in the
patron account in staff didn't work correctly as we had missed
adding Home library to the configuration options when it was
added.
This adds the missing definition and now all columns can be
toggled correctly.
To test:
- Go to any patron account in staff
- Go to Accounting > tab transactions (maybe add some fines)
- Toggle the columns on the table using the menu, especially
- notes, home library and checkout date
- Go to Administration > Table configuration
- Verify the settings for the table work well from there too -
with the patch, home_library will show as new option
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
If HoldsQueueSkipClosed is enabled, and a library happens to be closed
on the day you edit the transport cost matrix, all the values for that
library will not show. Instead they will appear disabled, and if you
were to edit the cell and save a new value in it, it will also
'disappear' when the page is reloaded.
Test Plan:
1) Set today as a holiday for a library
2) Set HoldsQueueSkipClosed to 'open'
3) Go to the transport cost matrix editor
4) Edit a cell where the 'from' is for the closed library
5) Note the value doesn't 'save', it is still in the database though
6) Apply this patch
7) Restart all the things!
8) Reload the transport cost matrix editor
9) The value now appears correctly!
Signed-off-by: Lisette Scheer <lisetteslatah@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Add a "year" search field type. Fields with this type will only
retain values that looks like years, so invalid values such as
whitespace or word characters will not be indexed.
This for instance improves the behaviour when sorting by
"date-of-publication". If all values are indexed, records with
junk data instead of valid years will appear first among the search
results, drowning out more relevant hits. If assigning this field
the "year" type these records will instead always appear last,
regarless of sort order.
To test:
1) Have at least two biblios, one with a valid year in 008 (pos 7-10)
and another with an invalid one ("uuuu" for example)
2) Perform a wildcard search (*) and sort results by publication date.
3) The record with invalid year of pulication in 008 should appear first
4) Apply patch and run database updates
5) Reindex ElasticSearch
6) Perform the same search as in 2)
7) The record with the invalid year should now appear last
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds the capability to override minPasswordLenth and RequireStrongPassword settings by category
To test:
1. koha-shell kohadev
2. koha-mysql kohadev
3. drop database koha_kohadev;
4. create database koha_kohadev;
5. go to admin page and start webinstaller. There continue the steps until onboarding.
6. reach step 3 of onboarding and create a new administrator patron
CHECH => Password control woks as normal (Minimum length 3 and strong required)
7. finish Koha installation and enter admin with your new administrator
8. set minPasswordLength to 3 and RequireStrongPassword to “Don’t require”
9. Create a new category (CAT2 from now on.. CAT1 is the category you made in onboarding process) and set minimum password length to 8 and require strong password
10. Create two new patrons, one with CAT1(patron1) and one with CAT2 (patron2)
CHECK => In both cases, try different combinations of length and strength. For patron1 the only requirement is to have 3 letters, but for patron2 the minimum length will be 8 and will require strong password.
CHECK => Try changing patron category before saving. Password requirements will change with category change.
11. Edit CAT1 and set minimum password length to 5
12. Go to patron1 details page, and change password.
CHECH => Now password minimum length is 5, but still it doesn’t require strong password
13. Edit CAT1, leave blank minimum password length and set require strong password to yes.
14. Go to patron1 details page, and change password.
CHECH => Password minimum length is back to 3, but now strong password is required
15. Set minimum password length in CAT2 to 12.
16. Go to patron2 details page, and click to fill a random generated password
CHECK => generated password should be 12 characters length
17. Set PatronSelfRegistration to Allow in admin settings
18. Go to OPAC and fill self registration from.
CHECK => Play with patron category. For each change in category, password requirements are modified.
CHECK => Set CAT1 as patron category, set ‘aA1’ as password (or another valid password for CAT1) and before hitting submit button, change to CAT2. Form should enter invalid state, and CAT2 password requirements should be displayed as error in password input.
19. Create a patron for CAT1 and another for CAT2, leaving password blank
CHECK => For CAT1’s patron, generated password length is 8 (minimum length for generated passwords), but for CAT2’s patron should be 12
20. In admin set PatronSelfRegistrationVerifyByEmail to require
21. Fill self registration form again with CAT2 as category
CHECK => Password requirements works as previous case.
22. Leave password blank and click submit
23. select * from message_queue;
24. Copy the link in the message and paste it in OPAC
CHECH => Generated password is 12 characters long. (Copy user id for next steps)
25. In admin set OpacResetPassword to Allow
26. Go back to OPAC, reload and click on “Forgot password?” link
27. Paste user id and click submit
28. Repeat steps 23 and 24
CHECK => Info message says “Your password must contain at least 12 characters, including UPPERCASE, lowercase and numbers.”
CHECK => enter an invalid password and you’ll get the same message in warning.
29. Login OPAC with the last user and your newly created password
30. Go to “Change your password” option
CHECK => Info message says “Your password must contain at least 12 characters, including UPPERCASE, lowercase and numbers.”
CHECK => enter an invalid password and you’ll get the same message in below “New password” input.
31. prove t/db_dependent/AuthUtils.t t/db_dependent/Koha/Patron/Category.t
32. Sign off
Sponsored-by: Northeast Kansas Library - NEKLS
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This was wrong!
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
It defaults to 0 in get_template_and_user
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds the ability to exclude patrons (by category) from local
holds, and items, by editing the item itself or by batch item
modification tool.
To test:
1. apply patches
2. updatedatabase
3. Enable LocalHoldsPriority preference, and leave
LocalHoldsPriorityPatronControl in pickup library, and
LocalHoldsPriorityItemControl in holding library.
4. Search for a biblio with one item.
5. Place a hold with a patron (patron1) and set pickup location to a different
library of the item's home library
6. Place another hold with another patron (patron2) and set pickup location to be
the same as the item's home library
7. ./misc/cronjobs/holds/build_holds_queue.pl
8. Go to circulation -> holds queue
9. Search by the item's home library
CHECK => only the hold for patron2 (with the pickup location the same as the
item's home library) appears in the table
10. Go back to the biblio details page and click on "Items" tab
CHECK => There is a new section in the item's details between "Statuses"
and "History" called "Priority"
11. Set exclude to "Yes" and update
12. repeat steps 7 to 9
SUCCESS => only the hold for patron1 now appears, even the other hold had local
hold priority
13. Repeat step 10 and 11 but this time set exclude to "No"
14. repeat steps 7 to 9
CHECK => the hold for patron2 is back
15. Edit patron2's category and set exclude from local holds priority to
"Yes"
16. Repeat steps 7 to 9
SUCCESS => the hold for patron1 is back
17. Go to tools -> Batch item modification and in barcode list place
several (existing) barcodes and press continue
CHECK => There is a new section in the bottom called "Priority"
18. Set exclude to "Yes" and save
SUCCESS => all items in the list now have exclude setted to "Yes"
19. Try to checkout the first item to a patron3
SUCCESS => Alert message appears saying that patron1 has a hold on that
item
20. Click on Yes and then checkin that item
SUCCESS => There is a modal window saying that a hold was found for
patron1
21. prove t/db_dependent/HoldsQueue.t t/db_dependent/Holds/LocalHoldsPriority.t
22. Sign off
Sponsored-by: Cooperative Information Network (CIN)
Signed-off-by: Christopher Brannon <cbrannon@cdalibrary.org>
Signed-off-by: Christopher Brannon <cbrannon@cdalibrary.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
The match-heading field is a special field used only by the linker, not accessible
to staff or patrons via the interface. This field is used to store the constructed
'search form' used for matching bib headings to authority fields.
In bug 24269 I attempted to use the mappings defined in the inferface and also inject the search term.
This did not work as too many subfields were indexed on their own and leading to false matches.
In this bug we remove the mappings for this field, and create it ourselves during
the indexing process. The C4::Headings module is still used to generate the correct form,
however, the mappings are set based on the authority types in the system. This gives the user
the ability to add new typoes, but prevents mapping changes from breaking linker functionality
To test:
1 - Start form a sample database with ElasticSearch working
2 - Download via Z39.50 2 authorities, one of which is a narrower heading of the other, e.g.:
Waterworks
Waterworks - Costs
3 - Place a heading for the broader term in a record. e.g. Waterworks
In 650$a, without the cataloguing authority plugin. We don't want
the link created now.
You need syspref BiblioAddsAuthorities => allow
4 - Make sure linker is set to default
5 - Attempt to link the records
misc/link_bibs_to_authorities.pl
6 - Linking fails
7 - Apply patch
8 - refresh index settings (if using a custom file, remove 'match-heading')
You can reset mappings in the UI or run this:
misc/search_tools/rebuild_elasticsearch.pl -v -d -r
9 - Reindex ES
10 - Try to link again
11 - It succeeds!
12 - Run the tests
prove t/db_dependent/Koha/SearchEngine/Elasticsearch.t
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Bug 25273: (follow-up)
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Rather than limiting initials to [A-Z] we should test for a broad
range of uppercase letters.
The ES/Zebra changes are slightly different because of Perl vs Java regex
conventions. POerl may support either, but I found 'Uppercase' to be a bit more explicit
More info here:
https://perldoc.perl.org/perlunicode.html
TO test:
Same plan as before but use Ж. as the ending initial
Confirm the period is preserved and other punctuation removed
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
The current code for facets doesn't pull strip ending punctuation from facets
This causes duplicate facets for terms that should be combined
Sometimes series can have different punctuation depending on the field they are in
Author initials punctuation should be preserved
To test:
1 - Do search and pull up some records
2 - Edit some of the records to have authors like:
Date, C.J.
Date, C.j.
Date, C.J .
3 - Edit the records to have some series statments like:
830 $aDate, C.J. ;$v5
830 $aDate, C.J. ; $v5
830 $aDate, C.J.; $v5
4 - Add some 490s to the record with first indicator 1 and series like:
You wouldn't want to--
You wouldn't want to
You wouldn't want to..
5 - Search again and note you have 3 facets each for author and series
6 - Apply patch
7 - Repeat
8 - Now you get 2 facets for author, period not removed when following Upper case immediately, is otherwise
9 - Now you should have a single series facet
10 - Switch search engine to ES (index before applying patch)
11 - Note facets are separate again
12 - Reset mappings and reindex
perl misc/search_tools/rebuild_elasticsearch -v -r
13 - Repeat search, facets combined as above
Signed-off-by: Sarah Cornell <sbcornell@cityofportsmouth.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This takes care of more occurences of staff client and changes it to
staff interface, including in code comments.
To test:
- I think in this case careful code review is what we look for.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
To test:
1 - Set 'ShowAllCheckins' to show
2 - Set a collcection code for an item
3 - Check it in
4 - Note it displays in the the 'Item type' column
5 - Apply patch
6 - Check it in again
7 - Note the new 'Collection' column
8 - Hide/show the column using column visibility on the checkins page
9 - Go to Admin->Configure columns
10 - Test the various settings for this column and check in the item to
make sure they work as expected
Signed-off-by: Devinim <kohadevinim@devinim.com.tr>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This feature is disabled by default for all credit types. To enable it
you have to set the syspref AutoCreditNumber to the value of your choice
and then enable the feature for each credit type you want.
System credit types can be modified too (but only this particular field
can be modified)
Also, throw an exception when the feature is enabled and a value for
credit_number has already been set
Updated test plan:
Test plan:
0. Apply patch, run updatedatabase and update_dbix_class_files
1. Go to Admin » Column settings, and uncheck the 'hidden' box for
column credit_number in table account-fines. It will be easier for
testing
2. Create a manual credit for a borrower. Verify in Transactions tab
that this credit has no number generated
3. In Admin » Credit types:
a. edit the FORGIVEN type and enable credit number generation
b. create a new type A, check "can be manually added" and "enable
credit number"
c. create a new type B, check "can be manually added". Do NOT enable
credit number
4. Change syspref 'AutoCreditNumber' to 'incremental'
5. Create more manual credits with types CREDIT and B, and verify that
the numbers are not generated
6. Create more manual credits with types FORGIVEN and A, and verify that
the numbers generated are 1, 2, 3, ...
7. Change syspref 'AutoCreditNumber' to 'annual'
8. Create more manual credits with types CREDIT and B, and verify that
the numbers are not generated
9. Create more manual credits with types FORGIVEN and A, and verify that
the numbers generated are '2020-0001', '2020-0002', ...
10. Change syspref to 'AutoCreditNumber' to 'branchyyyymmincr'
11. Create more manual credits with types CREDIT and B, and verify that
the numbers are not generated
12. Create more manual credits with types FORGIVEN and A, and verify
that the numbers generated are 'BRANCHA2020020001',
'BRANCHA2020020002', ... (assuming you are connected to library
BRANCHA, and it's February 2020)
13. Set library to another one, say BRANCHB
14. Create more manual credits with types FORGIVEN and A, and verify
that the numbers generated are 'BRANCHB2020020001',
'BRANCHB2020020002', ...
15. Edit the letter ACCOUNT_CREDIT, and add [% account.credit_number %]
somewhere. Go back to Transactions tab and click on 'Print' for one
line that has a credit number. Make sure the number is there.
16. prove t/db_dependent/Koha/Account.t
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
In some areas it's required to sequentially number payment slips /
receipts.
This patch adds a database column accountlines.credit_number and a
system preference AutoCreditNumber to control how this number will be
generated. The following options are available:
- Do not automatically generate credit numbers.
This is the current behaviour and the default syspref value.
- Automatically generate credit numbers in the form <year>-0001 (annual)
- Automatically generate credit numbers in the form
<branchcode>yyyymm0001 (branchyyyymmincr)
where <branchcode> is the branch where the user (staff member) is
logged in
- Automatically generate credit numbers in the form 1, 2, 3
(incremental)
It also adds a column (hidden by default) in the table under
Transactions tab to display this number.
Test plan:
0. Apply patch, run updatedatabase and update_dbix_class_files
1. Go to Admin » Column settings, and uncheck the 'hidden' box for
column credit_number in table account-fines. It will be easier for
testing
2. Create a manual credit for a borrower. Verify in Transactions tab
that this credit has no number generated
3. Change syspref 'AutoCreditNumber' to 'incremental'
4. Create more manual credits, and verify that the numbers generated are
1, 2, 3, ...
5. Change syspref 'AutoCreditNumber' to 'annual'
6. Create more manual credits, and verify that the numbers generated are
'2020-0001', '2020-0002', ...
7. Change syspref to 'AutoCreditNumber' to 'branchyyyymmincr'
8. Create more manual credits, and verify that the numbers generated are
'BRANCHA2020020001', 'BRANCHA2020020002', ... (assuming you are
connected to library BRANCHA, and it's February 2020)
9. Set library to another one, say BRANCHB
10. Create more manual credits, and verify that the numbers generated are
'BRANCHB2020020001', 'BRANCHB2020020002', ...
11. Edit the letter ACCOUNT_CREDIT, and add [% account.credit_number %]
somewhere. Go back to Transactions tab and click on 'Print' for one
line that has a credit number. Make sure the number is there.
12. prove t/db_dependent/Koha/Account.t
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
To test:
1 - Browse to Administration -> Item types
2 - Not a new colum for prent type
3 - Edit an existing type and not you can select any type (except the current) as a parent
4 - Select one
5 - Edit the type you selected as parent
6 - Note it cannot have a parent defined
7 - Edit a new type, note you can select a parent
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Lisette Scheer <lisetteslatah@gmail.com>
Signed-off-by: Alex Arnaud <alex.arnaud@biblibre.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds the datelastseen column to the holdings table and also makes it column configurable.
To Test:
-Apply patch and have a look at some item records.
-Notice the datalastseen column
-Make sure it wroks and its displaying the datelastseen correctly
-Go to the column configuration tools and make sure you can properly hide this column.
Signed-off-by: Sally <sally.healey@cheshiresharedservices.gov.uk>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch replaces all calls to RefundLostItemFeeRules with
Koha::CirculationRules->get_lostreturn_policy and removes the module it
makes redundant.
Test plan
1/ Confirm that there are no longer any uses of RefundLostItemFeeRules
in the codebase
2/ Confirm circulation tests still all pass
3/ Confirm you can still set and unset the lost return rules
4/ Signoff
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds column configuration to the orders by funds report
results table. The "Basket" column is excluded from being togglable.
To test, apply the patch and clear your browser cache if necessary.
- Go to Reports -> Orders by fund
- Submit parameters which will return multiple results.
- Test that the "Column visibility" button works to show and hide
columns. The "Basket" column should be excluded.
- Test the export options (Excel, CSV, etc)
- Go to Administration -> Columns settings and edit the default
configuration of the orders by fund report. Confirm that these changes
are reflected in the report results.
Signed-off-by: Sally <sally.healey@cheshiresharedservices.gov.uk>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
1) System preference: EnablePointOfSale - set to Enable
2) System preference: UseCashRegisters - set to Use
3) Administration > Accounting > Cash registers - create a new cash register for the library you're logged in as
4) Administration > Accounting > Debit types - create at least one debit type
5) Home > Point of sale - verify that all four columns exist in the Items for purchase table: Code, Description, Cost, Action
6) Administration > Additional parameters > Table settings > Point of sale - change which columns can be hidden and/or toggled
7) Home > Point of sale - verify that your choices have been implemented (columns are hidden, columns can be toggled, columns can't be toggled)
8) Repeat steps 6 and 7 for different combinations, checking that they all work.
Signed-off-by: Sally <sally.healey@cheshiresharedservices.gov.uk>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Added Sally's test plan.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch tweaks the UI so it forbids changing the hidden values when
they are correct (i.e. when they are not hidden in OPAC and intranet).
To test:
1. Apply the first patch
2. Play with the hidden values of the subfield you have mapped to
biblio.biblionumber in your picked framework. This is usually 999$c
in MARC21, and 001 in UNIMARC.
=> SUCCESS: When you verify the about.pl, it mentions issues when you
hide in some of the interfaces
3. Apply this patch and reload everything
4. Repeat 2
=> SUCCESS: If your framework is 'ok', it prevents you from editing this
values, otherwise you can change them.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
If we try to put malformed data into an integer field, Elasticsearch
rejects the whole document.
Setting 'ignore_malformed' to true allows to ignore malformed data and
process the other fields of the document normally
https://www.elastic.co/guide/en/elasticsearch/reference/7.8/ignore-malformed.html
Test plan:
* Without the patch
1. In search engine configuration, change the type of a text field to
'Number' (for instance 'title')
2. misc/search_tools/rebuild_elasticsearch.pl -d -b
3. See that the index is empty (unless you have titles consisting only
of digits)
* With the patch
1. misc/search_tools/rebuild_elasticsearch.pl -d -b
2. Now records are correctly indexed
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds DataTables with columns configuration to the log viewer.
The table of log entries is now sorted by default by date descending.
To test, apply the patch and go to Administration -> Table settings.
- Expand the "Tools" section and confirm that there is a section for
"logviewer."
- Go to Tools -> Log viewer.
- Perform a search which will return multiple results.
- Confirm that the results are sorted by date descending.
- Test that the table controls work correctly: Paging, columns, export.
- Return to the Table settings administration page and test that
changes to those settings are correctly reflected in the log viewer
table.
Signed-off-by: barbara <barbara.johnson@bedfordtx.gov>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
JD amended patch: Fix indentation in .yml to match other entries
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Will conflict with bug 20443 \o/
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch introduces a new way for users to select database columns for
system preferences like BorrowerMandatoryField, which currently
require hand-typing of database names.
This new system uses a JSON file containing label:column pairs for
database columns which are relevant to preferences which reference
borrower table columns. My intention was to have user-friendly values as
the labels, but embedding English strings in JSON would make them
untranslatable.
The following preferences are affected:
- BorrowerMandatoryField
- BorrowerUnwantedField
- PatronSelfModificationBorrowerUnwantedField
- PatronSelfRegistrationBorrowerMandatoryField
- PatronSelfRegistrationBorrowerUnwantedField
== Test plan ==
- apply the patches
- regenerate the staff client CSS (yarn build)
- updatedatabase
- dbic
- flush_memcached
- restart_all to make sure the updated .pref file is used
- Go to Administration -> System preferences, and search for
"PatronSelf"
- The input fields for PatronSelfModificationBorrowerUnwantedField,
PatronSelfRegistrationBorrowerMandatoryField, and
PatronSelfRegistrationBorrowerUnwantedField should appear as "locked"
(read-only) inputs.
- Clicking the input field should trigger a modal window with
checkboxes for each available column from the borrowers table.
- Test that the "select all" and "clear all" links work correctly.
- Test that the "cancel" link closes the modal without saving your
selections.
- Test that the "Save" button closes the modal, copies your selections
to the form field, and triggers the preference-saving function (this
eliminates the need to click a save button again after closing the
modal).
- Test this process by making modifications to all three different
preferences, confirming that the right data is preselected each
time the modal is shown and the right data is saved to the right
field each time.
Signed-off-by: Hayley Mapley <hayleymapley@catalyst.net.nz>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This warning emitted:
Use of uninitialized value $maxsuspensiondays in string eq
at /admin/smart-rules.pl line 257.
But that not just undef-warning, there is broken logic,
these two lines are mutually contradictory and goes one-by-one:
$maxsuspensiondays = undef if $maxsuspensiondays eq q||;
$maxsuspensiondays = '' if $maxsuspensiondays eq q||;
Fix is simple: to make it '' if it comes undef.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This warning emitted:
Use of uninitialized value in string eq at /admin/smart-rules.pl line 289.
It is solved by one line added to exclude comparison with 'on' string
when variable is 'undef'.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This warning emitted:
Use of uninitialized value in hash element
at /admin/smart-rules.pl line 569.
that happened because we have NULLs in SQL results for 'categorycode'
and 'itemtype' which later used as 'any' kind of category/item in the
template, so for the template it passed this way:
$rules->{ $r->{categorycode} }->{ $r->{itemtype} }->...
but undef will stringify as "" to become a hash key ("Hashes are
unordered collections of scalar values indexed by their associated
string key" https://perldoc.perl.org/perldata.html),
that's why "undef warning". To prevent warning here is the simple fix:
$rules->{ $r->{categorycode} // '' }->{ $r->{itemtype} // '' }->...
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This warning emitted:
CGI::param called in list context from /admin/smart-rules.pl line 262,
this can lead to vulnerabilities. See the warning in "Fetching the value
or values of a single named parameter" at CGI.pm line 412.
Explained here: https://metacpan.org/pod/CGI#Fetching-the-value-or-values-of-a-single-named-parameter
And because all these params are not multi-params, so simple "scalar .."
forcing for CGI->param is the fix. Changes are transparent and same
values should be assigned as before, just no more warnings.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
In code CGI param 'no_auto_renewal_after_hard_limit' assigned to
"$no_auto_renewal_after_hard_limit" var, and then just in the next line
again variable "$no_auto_renewal_after_hard_limit" reassigned with
call to same "$input->param('no_auto_renewal_after_hard_limit')".
Fixed. No logic or results should be changed.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
In that case it's equal to 0 and we need to adjust the test condition.
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Alex Arnaud <alex.arnaud@biblibre.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch is the main patch of this patchset, you will find the
description and the test plan.
The idea of this new enhancement is to add the ability to define the
default sort order and the default number of rows displayed on the
acquisition basket page.
The existing "columns settings" feature was replaced by a
"tables settings" feature. To prepare the ground, there were some
works that were needed:
* rename variables and files
* Modify the structure of the yml files
* Create a new DB table to store the tables settings
Test plan:
0)
a. Execute the update DB entry to create the new table
b. Restart all (to get a new version of the yml file, that is cached by
memcached)
c. Create several orders for a given basket
1) Go to the basket view page
=> The default values are the same than without this patchset, the
number of entries to display is set to "20" and the table is sorted by
basket number (first column)
2) Go to the "Columns settings" page
3) Unfold the "Acquisition" tab
=> Notice the 2 dropdown lists at the bottom of the basket table
4) Select different values for "Default display length" and "Default
sort order"
5) Refresh the basket view page
=> Notice that the default settings are now effective on the table
QA note: We can decide to replace the different occurrences of "Columns settings"
by "Tables settings" if needed.
Sponsored-by: Institute of Technology Tallaght
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Alex Arnaud <alex.arnaud@biblibre.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
To match the new structure, we adjust the other tables.
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Alex Arnaud <alex.arnaud@biblibre.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Modification of the structure of the yml file.
It was
table:
- column list
It now becomes
table:
default_display_length: X
default_sort_order: Y
columns:
- column list
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Alex Arnaud <alex.arnaud@biblibre.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
We are preparing the ground with this patch. As the "Columns settings"
page will now add the ability to modify settings for the whole table, it
makes sense to rename the file and the variables.
Note that the controller script (admin/columns_settings.pl) and the yml
(admin/columns_settings.yml) files have not been moved to not break
shortcuts and abits people could have. But if QA decides, it could be
easy to do.
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Alex Arnaud <alex.arnaud@biblibre.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch changes the new circulation rule that's introduced from
useDaysMode to daysmode to improve consistency with other rule names.
We also update the accessors and code using them to reflect the new
term.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Sponsored-by: Institute of Technology Carlow
Signed-off-by: Simon Perry <simon.perry@itcarlow.ie>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
After the QA round on bug 25279, some things needed to get fixed:
- Data needs to be escaped
- When no library is defined, we should keep the original behaviour and
message.
- aria-hidden="true" for FontAwesome coding guideline enforced
- Added role="button" as well.
This patch does that.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch makes the general libraries datatable use the API for rendering.
To test:
1. Test the datatable behaviour
2. Apply this patch
3. Repeat your tests
=> SUCCESS: Things work! Filtering and sorting specially
Bonus: Use the browser inspector to notice each interaction with thex
datatable triggers an API call with the right query parameters
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Frédéric Demians <f.demians@tamil.fr>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch moves the OPAC problem report management page from the
Administration section to the Tools section.
I think this makes sense because management of reports is an ongoing
task, not a configuration.
To test, apply the patch and enable the OPACReportProblem system
preference.
- Go to Administration. There should be no link to OPAC problem
reports.
- Open an administration page which shows the Administration menu in
the left-hand sidebar, e.g. Libraries. There should be no link to
OPAC problem reports in the menu.
- Go to Tools. There should be a link to OPAC problem reports in the
"Addional tools" section.
- Open the OPAC problem reports page and confirm that it works
correctly.
- The breadcrumbs menu should show "Tools > OPAC problem reports."
- Confirm that the link in the sidebar menu works correctly.
- If necessary, submit an OPAC problem report via the OPAC so that
there is a pending report. Go to the staff interface home page and
check that the "OPAC problem reports pending" link works correctly.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch corrects the column configuration tool for basket.pl
TO TEST:
1. Go to Acquisitions and look at basket.pl
2. Open another tab and go to column configuration and try to hide some columns like Quantity.
3. See that the wrong columns are being hidden.
4. Apply patch
5. Trying hiding each column in the table and make sure the correct one is being hidden.
6. Rejoice!
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
When modifying an existing authorised value, the category is not
correctly passed to the template and so it is not passed to the
POST request, which results in the authorised value switching to
category '', which effectively make it disappear from the interface.
This patch fixes that.
Signed-off-by: Sally <sally.healey@cheshiresharedservices.gov.uk>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
returnbranch has to pass an itemtype key when setting the rule (here
setting it to unlimited for any item types)
Test plan:
1. Go the "Circulation and fine rules" admin page
2. Set a rule for "Default checkout, hold and return policy"
3. Unset it
4. Select a library
5. Set a rule for "Default checkout, hold and return policy"
6. Unset it
Display should be consistent with what you selected
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
It must be NULL/undef, the default from the DB.
The method Koha::Patron::Attribute::Type->categorycode is not covered by tests!
To recreate:
Create a new patron attribute type, don't select a patron's category (and not repeatable or unique)
Go to the batch patron modification tool, enter a cardnumber, next.
=> boom!
Apply the patch, edit the patron attribute, save
Go to the batch patron modification tool, enter a cardnumber, next.
=> success!
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Test plan:
1- View a record with Materials specified (field 3) data in the opac
2- Apply patch
3- Log in to staff client
4- Home->Administration->Column Settings->OPAC->holdingst
5- Set item_materials visibility
6- Refresh OPAC page
7- Confirm that the materials specified column has been added after the
Call number column.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
It prevents:
* The screen to display "no city, create one" if we are
searching for a string that does not return any results.
* The list to display only the city we have just created
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch does the following things:
- Uses a call to Koha::Cities->search(*)->count to display the same
message we displayed before when no city was found/defined (datatable
not rendered at all).
- Restores the main search box functionality, the passed param is used
to query on the city name with wildcards on both sides, for (a)
counting results and for (b) apending to the API call with the same
behaviour.
The only missing bit from QA is HTML/URI escaping values from cells, but
this is going to happen at DT level most sure.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch makes the general cities datatable use the API for rendering.
To test:
1. Test the datatable behaviour
2. Apply this patch
3. Repeat your tests
=> SUCCESS: Things work! Filtering and sorting specially
Bonus: Use the browser inspector to notice each interaction with the
datatable triggers an API call with the right query parameters
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
TO TEST:
1. Have a patron with some fines on an item. Try accruing fines.
2. Go to the accounting tab and look at both the Tranaction tab and Make a payment Tab
3. No Issue Date
4. Apply patch
5. Check those tabs again and see the issue date displays.
6. Go to column configuration and try to hide the issuedate, make sure it hides properly. Try this for both tables. Also make sure other columns hide properly.
7. Sign off!
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
The date accessioned column in the items table was not
configurable in the columns settings.
To test:
- Make sure the Date accessioned is shown in the column list
on both tables
- Make sure that configuring it via Adminitration > Configure
columns works as intended
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
To test:
1 - Apply patches
2 - View biblio details in staff client
3 - Should be able to toggle columns
4 - Go to admin columns settings
5 - Change some settings, verify they work
6 - Enable SeparateHoldings
7 - Go to a record that has holdings from 2 different branches
8 - Change some settings, verify they work.
9 - Check the Other Holdings Tabs, change some settings make sure they work.
10. - Test all the dataTable functions like the search box, columns, export. make sure they on both tabs
Signed-off-by: Sally <sally.healey@cheshiresharedservices.gov.uk>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This new patch set is adding a new DB field is_system to distinguish
internal categories.
The list of internal categories is in the patch "DB changes - set
is_system for categories" and can be discussed/extended.
Test plan:
0.
- Apply patch
- updatedabase
1.
- Create a new AV category
- Create an authorised value
- List the AVs for this category
- Remove all the AVs for this category
=> You see 2 buttons "Add a new authorised value" and "Delete category
'XXX'"
- Click the delete button
=> You get a popup
- Accept
=> The category is deleted
2.
- List the AV for Asort1 (internal category)
/cgi-bin/koha/admin/authorised_values.pl?searchfield=Asort1
- Delete the AVs for this category (if there is any)
=> You do not see the "Delete category" button
3.
- Create a new AV category 'foo'
- Create an authorised value
- Hit /admin/authorised_values.pl?op=delete_category&categor_name=foo
=> You get an error message (expected because the category cannot be
deleted if it has AV linked)
=> message text:
=> An error occurred when deleting this authorized value category. Check the logs.
4.
- Hit /admin/authorised_values.pl?op=delete_category&categor_name=Asort1
=> You get an error message (expected because the category Asort1 cannot
be deleted, it's an internal category.
=> message text:
=> An error occurred when deleting this authorized value category. Check the logs.
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Some digging revealed that when you create a new framework
and use an old framework as the base, some information would
not be copied to the new framework as they were missing from
the SQL command used here.
- Tag: Important
- Subfield:
- Important
- Default value
- Max length
- Is a URL
- Link
To test:
- Pick one of the existing frameworks and change the
fields listed above. Take note of what you changed.
- Create a new framework
- Go to "Marc structure" of the new framework
- You are offered the option to copy an existing framework
- Use your prepared framework
- Verify the fields weren't copied - your config was lost
- Apply patch
- Create another new framework
- Repeat the duplication and tests
- Verify that now all fields have been copied correctly
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
The checkouts tables on the checkouts and details tabs in the staff
patron account support column confiugration, but the new column
"Return claims" was missing.
This patch adds the column to the column configuration.
To test:
- Make sure to test with a patron having return claims and without
- Verify cou can toggle the visibility of the return claims column
from top of the tables in the checkouts and details tabs
- Go to administrastion > column configuration
- Change the settings for the issues tables in the Patrons and
Circulation sections
- Verify the changes have been applied to the tables as configured
Signed-off-by: David Roberts <david@koha-ptfs.co.uk>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
The default/active tab when opening the sys pref editor used
to be 'Acquisitions' as the first tab, but should now be the new
first 'Accounting'
To test:
- Go to Administration > System preferences
- Verify the Aquisition tab is second and preselected
- Apply patch
- Repeat
- Verify now Accounting is selected
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Test plan:
Try to create 2 AV with the same code for the same category.
You should see a warning
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Lari Taskula <lari.taskula@hypernova.fi>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
status varchar(6) with readable statuses
borrowernumber not null default 0
hide form if message successfully sent
fixing hide viewed and hide closed filters
adding recipient column
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Test plan:
- Update database and upgrade schema files (if you haven't already).
Restart memcached
- Check your user's permissions and ensure the 'problem_reports'
permission is ticked. Confirm the OPACReportProblem syspref is enabled
- Log into the OPAC and submit a problem report
- Log into the staff client
- You should see a box at the bottom of the main page showing your
pending problem report
- Click the link and confirm it takes you to the new page for managing
problem reports
- Go to Administration
- Confirm you can see a link to 'OPAC problem reports' under the
'Additional parameters' heading
- Click 'OPAC problem reports'
- Confirm your problem report is showing in the table
- Open the OPAC in another tab and submit at least two more problem
reports (so you should have at least three in the table after
refreshing)
- Try the different buttons
- selecting multiple problem reports and using the big 'mark
viewed', 'mark closed', 'mark new' buttons. Confirm there are no
failures and that the number of selected problem reports is correct
- select all, clear all, hide viewed, hide closed, hide new, show
all
- individual 'mark viewed', 'mark closed', 'mark new' buttons for
each problem report. Confirm the status shows and the correct button
is disabled while others are enabled
- Confirm the problem page link works as expected
Sponsored-by: Catalyst IT
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
We need to be consistent and provide the mappings.yaml file generated by
the script.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
The amdin page for the "did you mean" feature has two block for setting it up in the staff interface, and a note saying this isn't implemented on the staff interface yet.
We remove the part about the staff interface until it actually is implemented.
Test plan :
1) Apply patch
2) Go to Administration > Did you mean?
3) See there is only the OPAC block
4) Change some checkboxes
5) Save configuration
6) Check that configuration is saved
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Owen Leonard 2018-03-16 10:47:47 UTC :
<<
I don't think the system preference adds any security. There are already multiple permissions required for working with plugins:
- Configure plugins
- Manage plugins ( install / uninstall )
- Use report plugins
- Use tool plugins
And even with those permissions your server must be configured to allow the use of plugins.
>>
Test plan :
1) Install kitchen sink plugin https://github.com/bywatersolutions/koha-plugin-kitchen-sink
2) Run misc/devel/install_plugins.pl
3) Set config enable_plugins=1
4) Check all parts of the plugin are working
5) Set config enable_plugins=0
6) Check all parts of the plugin are disabled
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
- Ensure that the sequence of columns will be the same for new
and updated installations (add AFTER ...)
- Fix permissions (see bug 22868)
- Fix column configuration (see 16784)
- Remove '- ' displying before the date
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
The .pl was checking for a new permission desks_management not
(yet) added. As the templates already checked for manage_libraries
the .pl was changed accordingly to also use it.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Add a desk and linked it to a library (branch). That's it. In the
future it'll have super features like being able to link waiting
reserve to a specific desk.
Test plan:
1. go to the administration page and notice there isn't any mention of
desk whatsoever
2. apply patches
3. ./installer/data/mysql/updatedatabase.pl
4. prove t/db_dependent/Koha/Desks.t
5. you now have desks links in admin-home and admin-menu
6. click the link
7. add a desk
8. add another one
9. delete one
10. you should have a fair list of all current desks defined
11. Done
Signed-off-by: Séverine QUEUNE <severine.queune@bulac.fr>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Marti Fuerst <mfuerst@hmcpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Replace C4::Members::AttributeTypes->num_patron with
Koha::Patrons->filter_by_attribute_type
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
We can then now start to move methods from C4::Members::AttributeTypes
as well.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch adds course_items_table to the column config tool
TEST PLAN:
1. Have some course reserves
2. Add some items to that course reserve and browse to opac-course-details
2. See all the unconfigurable columns
3. Apply patch
4. Browse to column config > OPAC > opac-course-details
5. Try hiding each column and make sure the correct column is hidden on opac-course-details.pl
Signed-off-by: Devinim <kohadevinim@devinim.com.tr>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
There is some quite old and unused code in Koha related
to printer configuration and network printing. These code
hasn't been functional in a long time and should be removed.
This patch:
- Removes printcirculationslips system preference
- Removes table printers
- Removes branchprinter column from branches
Check that:
- Go to administration
- Open any age there, but change the last bit to: printers.pl
- Apply patch, run the database update
- Verify the hidden page no longer exists
- Verify that logging in and out still works correctly
- Verify that checkout and returns work correctly
- Switch to another branch using the "Set library" option
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
NO_LIBRARY_SET was used when the DB user was logged in. Since bug 20489
it's not longer possible. We could remove the code.
One occurrence left in C4::InstallAuth as there is no (real) logged in user yet.
Test plan:
* Install Koha to make sure NO_LIBRARY_SET is not needed during the
install process
* Login into Koha
* Make sure the your library's name is displayed correctly in the header
* Set another library
* Confirm that the library's name is updated
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
No problem during install, nor changing library.
Fixed (pre-existing) tab in circ/branchtransfers.pl
No errors
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch adds opac-course-reserves to the column config tool
TEST PLAN:
1. Have some course reserves and go look at opac-course-reserves.pl
2. See all the unconfigurable columns
3. Apply patch
4. Browse to column config > OPAC > course_reserves_table
5. Try hiding each column and make sure the correct column is hidden on opac-course-reserves.pl
Signed-off-by: Devinim <kohadevinim@devinim.com.tr>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Bug 9978 should have fixed them all, but some were missing.
We want all the license statements part of Koha to be identical, and
using the GPLv3 statement.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
It is the same as for debit types.
It adds a new column `archived` in table `account_credit_types` that has
the same purpose than `account_debit_types.archived`
Test plan:
0. Apply patch && run updatedatabase && update_dbix_class_files
1. Go to Admin » Credit types
2. Add a new credit type, give it a code and a description and check
'Can be manually added'
3. Go to a patron's accounting section, 'Create manual credit' tab
4. Verify that the new credit type appears
5. Return to Admin » Credit types and archive the credit type
6. Verify that the new credit type is not available anymore in 'Create
manual credit'
7. Restore the credit type and verify that it is available again
8. Create a manual credit with the new credit type
9. Go to Reports » Cash register and make sure you can find the
transaction by filtering on transaction type
10. Edit the new credit type and set some library limitations, make sure
that the credit type doesn't appear if you're connected to a library
you didn't selected, and that it appears if you're connected to a
library you selected.
Note to QA team:
The change in Koha/Account.pm, I added it because otherwise Koha died
when adding a manual credit with a custom type.
In that case, offset type will default to 'Manual Credit'. I'm not sure
if that is the best thing to do. I'm open to suggestions :)
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This is an interface for quick and efficient browsing through records.
It presents a page at /cgi-bin/koha/opac-browse.pl that allows you to
enter the prefix of an author, title, or subject and it'll give you a
list of the options that match that. You can then scroll through these
and select the one you're after. Selecting it provides a list of records
that match that particular search.
To Test:
1 - Apply patches
2 - Update database (updatedatabase on kohadevbox)
3 - Compile the CSS
https://wiki.koha-community.org/wiki/Working_with_SCSS_in_the_OPAC_and_staff_client
yarn build --view=opac on kohadevbox
4 - Enable the new syspref OpacBrowseSearch
5 - Have ES running and some records in it
SearchEngine syspref set to Elasticsearch
6 - Browse to opac home, click 'Browse search' link
for your site)
7 - Test searching for author, title, and subject
8 - Verify that results are returned in expected order
9 - Experiment with fuzziness
https://www.elastic.co/guide/en/elasticsearch/reference/5.6/common-options.html#fuzziness
Options are: exact (0 edits), fuzzy (1 edit), very fuzzy (2 edits)
10 - Click any result and verify specific titles are correct
11 - Click through title to record and verify it is the correct record
12 - Test that disabling pref removes the link on the opac home
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Adds the "Attributes" field to z3950 servers.
The feature here is not quite de same.
In the old patches, the attributes were applied to individual query parts if the part already contains "@attr" and the additionnal attribute is not already in the query part.
Here, the content of the new field is prepended to all PQF queries sent to the server.
This new way of doing is simpler and works for the sponsor.
Test plan:
I) Apply the patch
II) Run updatedatabase.pl
1) Add a new z3950 server with the following parameters:
Hostname : catalogue.banq.qc.ca
Port : 210
Database : IRIS
Syntax : Marc21
2) Perform a z3950 search on that server.
Keyword (Any) : egypt
2.1) Nothing Found.
3) Add attributes on the server administration page
@attr 4=1
4) Perform the same z3950 search
4.1) A lot of results
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This removes code duplication by introducing a new subroutine
strip_non_numeric() that removes whitespace and makes the rule value
'' if it is a string value instead of a digit. The call to
strip_non_numeric() is now added also to all the rules it is needed
in.
To test:
1. Write some string like "test" to rules:
- Current checkouts allowed
- Current on-site checkouts allowed
- Holds allowed (total)
- Holds allowed (daily)
- Holds per record (count)
- Holds per record (count) – can be found in default policy
2. Save rules
3. Apply patch
4. Edit the rule line where you just typed all those strings and save
5. Notice how the values are now empty strings (some say "unlimited" but
if you go check from DB it should show empty value there)
Sponsored-by: The National Library of Finland
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
We certainly faced 3 similar bugs due to this syntax: bug 23006, bug
22941 and bug 17526.
To prevent other issues related to this syntax this patch suggests to
replace them all in one go.
Test plan:
Confirm that the 2 syntaxes are similar
Eyeball the patch and confirm that there is no typo!
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This fix permits to add an "Important" option to the marc structure pages.
Testing:
1) Apply the patch
2) Run updatedatabase.pl
3) Regenerate CSS
4) Define 100 as an "important" field ( Administration » MARC bibliographic framework » MARC structure ( Default Frameword) » Edit )
5) Define 100$a as an "important" subfield (Administration » MARC bibliographic framework » MARC structure (Default Frameword) » Subfield » Onglet a)
6) Edit a record to clear the field 100 (subfields are all blank)
7) Save the record.
8) Validate the following message:
A few important fields are not filled:
* tag 100 subfield a Nom de personne in tab
* Field 100 is important, at least one of its subfields should be filled.
Are you sure you want to save?
Sponsored by the CCSR ( http://www.ccsr.qc.ca )
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch adds columns configuration to the holds awaiting pickup
tables. Doing so helps solve the printing issue by adding a "Print"
option to both tables. Using this print function will provide a
printable version of only that table.
To test you should have multiple holds in your system which are marked
"waiting" and some which have been waiting longer than the value
specified in the ReservesMaxPickUpDelay system preference.
Apply the patch and go to Circulation -> Holds awaiting pickup.
- On both the "Holds waiting" and "Holds waiting over..." tabs the
DataTable should display correctly and all the controls should work,
including the columns settings and the choices in the export menu.
- Confirm that the "Print" action creates a printable version of only
the table you are viewing.
- Go to Administration -> Columns settings -> Circulation.
- Change some visibility controls for the tables under the
"holds_awaiting_pickup" heading (id=holdso and id=holdst). Confirm
that these changes are reflected in the "Holds waiting" interface.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
The column was missing from the yml file.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Without this it is not possible to make for a specific patron category
or itemtype a more specific unlimited holds_per_day rule if you have a
catch all rule (categorycode = *, itemtype = *) with limited
holds_per_day value.
Signed-off-by: Minna Kivinen <minna.kivinen@hamk.fi>
Signed-off-by: Joonas Kylmälä <joonas.kylmala@helsinki.fi>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
The "Clone these rules" feature in admin/smart-rules.pl was
dropped. This re-implements the cloning using Koha objects.
Signed-off-by: Minna Kivinen <minna.kivinen@hamk.fi>
Signed-off-by: Joonas Kylmälä <joonas.kylmala@helsinki.fi>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
The previous patch modifies:
- categorycode => undef,
- itemtype => undef,
- branchcode => $branch,
+ branchcode => undef,
But in that condition $branchcode is not '*' and so we should not set it
to undef
Signed-off-by: Minna Kivinen <minna.kivinen@hamk.fi>
Signed-off-by: Joonas Kylmälä <joonas.kylmala@helsinki.fi>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This necessitates moving the circ rules from using '*' to using
undef/NULL.
Signed-off-by: Minna Kivinen <minna.kivinen@hamk.fi>
Signed-off-by: Joonas Kylmälä <joonas.kylmala@helsinki.fi>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
When you create hierarchical groups of libraries you are not allowed to add
several times the same library to a given group/subgroup. The libraries
that are part of the group is not displayed on the interface, to prevent
the user to select it.
However this restriction is only done template-side, the controller and
module does not handle it.
To prevent that this patchset enforces the constraint at DB level, and
display a message to the end user.
Test plan:
- Go to Home › Administration › Library groups
- Add a group
- Add a library
- reload the page several times
=> Without this patch the same library appears several times in the group
=> With this patch applied you will see a friendly error message
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch corrects the order of the columns in the columns
configuration YML file. The incorrect order was causing the wrong column
to be hidden when changing the columns settings for the table in
Administration.
To test, apply the patch and go to Administration -> Columns settings.
- Under Patrons -> pay-fines-table, test hiding the account_type and
description columns, together and separately.
- Verify that the correct columns are hidden on the pay fines screen
(Patron -> Accounting -> Make a payment)
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
The permission name for changed during the implimentation of bug 23321
but one case was missed. This patch corrects that mistake.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Test plan:
0) Make sure you have a late order
a) Create a test vendor unless you have one
b) Create a test basket unless you have one
c) Close the basket to mark the order as late
1) Go to the late orders table
Before patch : Orderno, ISBN, vendor notes, internal notes are absent
After patch: fields are present
2) Edit the vendor note and/or the internal note
3) Press the save notes button
4) Refresh page and cache (CTRL+F5), if notes have been correctly saved, your modifications should be displayed.
Signed-off-by: Alex Buckley <alexbuckley@catalyst.net.nz>
Signed-off-by: Séverine QUEUNE <severine.queune@bulac.fr>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch adds DataTables column configuration and export options to
the suggestions management tables in the staff interface.
The columns settings made via the administrative interface will affect
tables under each tab in the interface whether it be organized by
status, library, etc. However because of the way the KohaTable function
is currently written, changes made via the "Columns" button will only
affect the visible table.
To test, apply the patch and go to Acquisitions -> Suggestions.
- Under each tab, the table of suggestions should have a DataTables
toolbar with export and columns buttons. These controls should work
correctly:
- Showing and hiding columns should work as expected
- Exports should work, excluding the first and last columns
- Test the tables when using the various "Organize by" settings.
- Test changing the settings in Administration -> Columns settings.
- Verify that the changes you make to that configuration are
reflected in the suggestions tables.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Currently, the rules used to create OAI sets are processed with the 'or'
boolean operator between each rule.
This patch allows to use 'or' or 'and' between the rules.
The evaluation of the rules is done according to the boolean operators
precedence: AND has a higher precedence than OR.
For example:
A and B or C and D
will be evaluated as follow:
(A and B) or (C and D)
Test plan:
- Apply the patch
- Apply the atomicupdate
- Prove t/db_dependant/OAI/AndSets.t
- Check that existing mappings still work
- Try modifying existing mappings
- Try creating new mappings
- Check that the boolean operators precedence is correctly taken into account
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch adds a the ability to define where a debit type will be
available as a option for use.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
When executing
Koha::SearchEngine::Elasticsearch->reset_elasticsearch_mappings()
against populated search engine mappings tables, one gets this
exception:
DBD::mysql::st execute failed: Duplicate entry '388-73' for key
'PRIMARY' [for Statement \"INSERT INTO `search_marc_to_field` ( `facet`,
`search_field_id`, `search_marc_map_id`, `sort`, `suggestible`) VALUES (
?, ?, ?, ?, ? )\" with ParamValues: 0='', 1='73', 2='388', 3=undef,
4=''] at /usr/share/perl5/DBIx/Class/Storage/DBI.pm line
1834.\nDBIx::Class::Storage::DBI::_dbh_execute(): Duplicate entry
'388-73' for key 'PRIMARY' at /home/koha/Koha/Koha/SearchField.pm line
38"
This patch fixes this, by first deleting all entries, then adding the
default ones.
If a subroutine says reset_elasticsearch_mappings(), I expect it to
reset the elasticsearch mappings without errors. When writing tests it
is better to call that one subroutine reset_elasticsearch_mappings
instead of the bunch of code in
admin/searchengine/elasticsearch/mappings.pl?op=reset_confirmed
Also this promotes code reuse.
TEST PLAN:
a. perl -e 'use Koha::SearchEngine::Elasticsearch; Koha::SearchEngine::Elasticsearch->reset_elasticsearch_mappings'
b. Run misc/devel/populate_db.pl on an already populated DB and you eventually
face this problem.
After this patch, step a. works.
This patch is adapted from the original patch made by Olli-Antti
Kivilahti <olli-antti.kivilahti@jns.fi>.
Signed-off-by: Johanna Raisa <johanna.raisa@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch adds a new checkbox option 'Is local hold group' when you create a new root group.
To test:
1) In intranet go to Library Groups in admin module
2) Add new root group
3) Check that there is no 'Is local hold group' checkbox
4) Apply this patch
5) Add new root group
SUCCESS => a new 'Is local hold group' checkbox appears
6) Select 'Is local hold group' and save
7) Click edit button for root group
SUCCESS => 'Is local hold group' is checked
8) Sign off
Sponsored-by: VOKAL
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
The same sysprefs search will not always return the results in the same
order.
If you search for 'd' in the "search system preferences" box
/cgi-bin/koha/admin/preferences.pl?op=search&searchfield=d
you will see that the modules are not ordered consistently.
This patch makes them display alphabetically
Test plan:
Search the same string several times in the syspref list.
The search result should always be ordered the same way
Signed-off-by: cori <corilynn.arnold@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
It gives incomplete results and not sure it ever worked.
To prevent data loss it is better to remove this option.
Note that the code in C4/ImportExportFramework.pm is too complex to
attach with this patch to deletion of the code related to the XML
import/export. Safer to keep it for a separate bug report.
Test plan:
Import/export biblio frameworks and confirm that there is no more
reference to the xml format.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Just in case.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch adds a status check into the mana configuration page and
prompts the user to ask an adminstrator to check the configured mana
service url.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Test plan:
1. Verify that biblioitems.itemtype, items.itype are
mapped to a MARC field. Otherwise create those mappings.
2. Create a biblio with an itemtype
3. Create an item with a different itemtype for this biblio
4. Check out this item to a patron (P1)
5. Verify that both itemtypes are displayed in the
checkouts table (moremember.pl, circulation.pl, returns.pl)
6. Create a patron whose guarantor is P1 and verify that both itemtypes
and the ccode are displayed in the 'relatives checkouts' table
Followed test plan, patch worked as described, also passes QA test tool
Signed-off-by: Alex Buckley <alexbuckley@catalyst.net.nz>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
As of bug 20589 we no longer analyze sort fields and so we no longer need to append ".phrase"
to our sort in searches.
Additionally, sort fields based on 'sum' should also use sum in building the value to sort on
To test:
0 - Be using ES
1 - Find the most circulated item in your collection
2 - Search for '*'
3 - Sort by popularity DESC
4 - Note that item is not first
5 - Try to sort by anything but relevancy, it fails
6 - Apply patch
7 - Redo searches and sorts
8 - Things should now work as expected
Signed-off-by: Ere Maijala <ere.maijala@helsinki.fi>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch rmeoves the 'delete' option from the debit_types system and
replaces it with an 'archive/restore' workflow. This will help
maintained referential integrity.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Test plan:
1) Naviage to a patron record and select the accounts > manual invoice
tab
2) Add some manual invoices and confirm they are working as expected
3) Signoff
Signed-off-by: Séverine QUEUNE <severine.queune@bulac.fr>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Test plan:
1) Go to admin home, note there is new Debit types page in Accounting
section
2) Go to any other admin page and confirm there is link to Debit types
in the admin menu as well
3) Go to Debit types page
4) You should see a datatable listing existing debit types, ensure they
are working as expected.
5) Try to create, edit and delete some debit types. Note: Some debit
types cannot be deleted as they are needed for koha functionality.
Signed-off-by: Séverine QUEUNE <severine.queune@bulac.fr>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch restores the methodology prior to bug 23602 of passing the
full Koha::ItemType objects to the template and thus giving us the
ability to use all the methods present within them.
Test plan:
1) Ensure you have at least one itemtype with an assigned icon and the
images enabled.
2) View the itemtypes admin page and note the icons display again
3) Ensure you have at least one itemtype with library limitations
defined.
4) View the itemtypes admin page and note the library limitations still
display.
5) Signoff
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch adds column configuration to the table of item types
in administration. No new defaults for the table are defined.
To test, apply the patch and clear your browser cache if necessary.
- Go to Administration -> Item types.
- Test that the "Column visibility" button works to show and hide
columns. The "actions" column should be excluded.
- Test that export options (Excel, CSV, etc) exclude the "actions"
column.
- Go to Administration -> Columns settings and edit the default
configuration of the item types table. Confirm that these
changes are reflected in item tyeps administration.
Test with noItemTypeImages on and off.
Signed-off-by: Maryse Simard <maryse.simard@inlibro.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Generate a list of fields for the query_string query fields parameter,
with possible boosts, instead of using "_all"-field. Also add "search"
flag in search_marc_to_field table so that certain mappings can be
excluded from searches. Add option to include/exclude fields in
query_string "fields" parameter depending on searching in OPAC or staff
client. Refactor code to remove all other dependencies on "_all"-field.
How to test:
1) Reindex authorities and biblios.
2) Search biblios and try to verify that this works as expected.
3) Search authorities and try to verify that this works as expected.
4) Go to "Search engine configuration"
5) Change some "Boost", "Staff client", and "OPAC" settings and save.
6) Verify that those settings where saved accordingly.
7) Click the "Biblios" or "Authorities" tab and change one or more
"Searchable" settings
8) Verfiy that those settings where saved accordingly.
9) Try to verify that these settings has taken effect by peforming
some biblios and/or authorities searches.
Sponsorded-by: Gothenburg Univesity Library
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Alex Arnaud <alex.arnaud@biblibre.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch adds a column in itemtype table to display branch limitations.
To test:
1) Open item types admin page.
CHECK => there is no column for branch limitations, even if you add a limitation in an item type.
2) Apply this patch
SUCCESS => A new column appears that displays branch limitations per item type
3) Sign off
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Maryse Simard <maryse.simard@inlibro.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This bug introduced a regression whereby if an authorized value has no
branch limitations then the authorized value cannot be edited once it
has been created. The edit page would display an error and not load.
This is the second case of a simple ternary correcting the issue, but
the logic of returning 'undef' from 'get_branch_limits' being called
into question.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This adds the ability to set a cash register as the default selected
option when making payments at a particular branch.
1) Note the addition of a 'Make branch default' button in each row of
the table under 'Manage cash registers'
2) Click the button and note that the button has changed.
3) Click on an alternative cash register for the same branch and note
that the default has been switched to the new register.
4) Click the 'unset' button on the default branch and note that there is
no longer a default register for this branch.
5) Signoff
Sponsored-by: PTFS Europe
Sponsored-by: Cheshire Libraries Shared Services
Signed-off-by: Maryse Simard <maryse.simard@inlibro.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Add in administrative interfaces to allow the management of cash
registers.
Test plan:
1) Enable the use of cash registers by setting 'UseCashRegisters' to
'Do'
2) Check that the 'Accounts > Manage cash registers' option now appears
in the 'Administration' area.
3) Click through to 'Manage cash registers' and note the message
suggesting you add your first register
4) Add you're first cash register
5) Note that the message has now been replaced by a table of cash
registers including the one you have added in the previous step.
6) Edit the cash register created in step 4 and note that the table
reflects the changes
7) Signoff
Sponsored-by: PTFS Europe
Sponsored-by: Cheshire Libraries Shared Services
Signed-off-by: Maryse Simard <maryse.simard@inlibro.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch adds some new columns to the overdue report: Patron category,
item home library, item holding library, item type. Adding these columns
makes available columns better match the available filter fields in the
sidebar form.
Column configuration is added to this DataTable, with the new columns
defined as hidden by default in order to preserve current functionality.
This patch also fixes a bug where the home and holding branch template
variable names didn't match what was being used in the template for
pre-selecting the searched-for value in the sidebar filter menu.
To test, apply the patch and go to Circulation -> Overdues.
- The list of overdues should look correct, with no new columns shown.
- Test the column visibility button, showing the columns which are
hidden by default. Confirm that the data in these columns displays
correctly.
- Update the default configuration for this table in Administration
-> Configure columns. Confirm that your changes are applied to the
overdues report.
Signed-off-by: Maryse Simard <maryse.simard@inlibro.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This bug introduced a regression whereby if any authorized value has no
branch limitations then the authorized value administration page would
fail to display at all.
A simple ternary corrects the issue, but I'm now wondering about the
logic of returning 'undef' from 'get_branch_limits'.. perhaps an empty
(or full) resultset might be a better option to prevent us from
requireing ternaries before calling chained methods on such objects.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch adapts the controller script for handling authorised values,
and the tests to reflect the method names changes.
To test:
- Verify you can add/delete/edit authorised values with/without branch
limitations, as usual
=> SUCCESS: All works as usual!
- Run:
$ kshell
k$ prove t/db_dependent/AuthorisedValues.t
=> SUCCESS: Tests pass!
- Sign off :-D
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
When creating an entirely new itemtype the script would fail upon
attempting to lookup existing itemtype branch limits. This patch adds a
ternary to prevent the failure.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch adds a select multiple when you add/edit an itemtype, creates functions to return itemtypes by library, and filters the options of itemtype select in additem
To test:
1) Apply this patch set
2) perl installer/data/mysql/updatedatabase.pl
3) In koha administration => item types, edit "Books" itemtype
CHECK => there is now a select multiple whith libraries at the bottom
4) select centerville and save
5) set centerville as current libary
6) search for any biblio in the catalog
7) click on "edit items"
CHECK => book item type is present
8) set any other libary as current library
SUCCESS => book item type is not present
9) Sign off
Sponsored-by: Northeast Kansas Library System
Sponsored-by: Southeast Kansas Library System
Sponsored-by: Central Kansas Library System
Signed-off-by: Jessica Zairo <jzairo@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
If a budget is locked, there is a "New fund for $budget" link that is
disabled but clickable.
We should ensure that the link is not clickable and prevent it at
controller level (do we need it at module level, ie.
Koha::Acquisition::Fund->store?)
Test plan:
- Create a budget, lock it
- Go to /cgi-bin/koha/admin/aqbudgetperiods.pl
- Click on the name of the budget you just created
=> The "New > New fund for $budget_name" button should be disabled
- Click it anyway
=> Without this patch the form to add a new fund is displayed
=> With this patch applied nothing happens
- Hit /cgi-bin/koha/admin/aqbudgets.pl?op=add_form&budget_period_id=XXX
With XXX the budget's id
=> Without this patch the form is displayed
=> With this patch applied you get a message:
"The budget is locked, fund creation is not possible."
And you are not able to create a new fund
QA notes:
1. See description
2. The add_validate op can still be forced, let trust librarians with
administration permissions for now.
Signed-off-by: Hayley Mapley <hayleymapley@catalyst.net.nz>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Increases maximum field count from the default 1000 to 10000 to accommodate large records and MARC as an array.
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Adds preference ElasticsearchMARCFormat that controls whether MARC records are stored as ISO2709/MARCXML or array. Array is searchable by field and also indexes all subfields in the _all field for searching.
Test plan:
1. Test that searching and indexing works with the patch without any changes.
2. Switch to array format and index some records.
3. Check e.g. the 008 field of a record and verify that the record can be found with the contents enclosed in quotes.
4. Check that it's possible to search for a specific field/subfield. Search query: marc_data_array.fields.655.subfields.a:Diaries
5. Check that tests still pass, especially t/Koha/SearchEngine/Elasticsearch.t
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
If strict SQL modes are set, the insertion of a new Z3950 server can
fail.
DBIx::Class::Storage::DBI::_dbh_execute(): Incorrect integer value: ''
for column 'checked' at row 1 at
/home/vagrant/kohaclone/admin/z3950servers.pl line 82
Using Koha::Z3950Servers fixes the issue (handled from
Koha::Object->store)
Test plan:
- Turn the strict SQL modes on (config strict_sql_modes)
- Create a new Z3950 server filling only the mandatory fields.
=> Without this patch you will get the failure, with this patch applied
the server will be inserted sucessfully
- Delete it
=> No regression should be found
- Search for servers
=> No regression should be found (the search is a start-with, LIKE "$pattern%")
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
It will fix the insert of new subfields with SQL strict modes
DBD::mysql::st execute failed: Incorrect integer value: '' for column
'hidden' at row 1 [for Statement "
Test plan:
- Turn the config strict_sql_modes ON
- Add a new subfield to a field
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch adds columns configuration to the DataTable which displays
Z39.50 search results in the cataloging module.
The Z39.50 results screen has its own server-side paging system, so I
added some code to copy the page number information ("Page 2 / 6") to
the DataTable toolbar for a more consistent appearance. The wording of
that information has also been modified for consistency's sake.
To test, apply the patch and restart Plack (or restart_all on
kohadevbox)
- Go to Cataloging -> New from Z39.50/SRU.
- Perform a Z39.50 search which will return multiple pages of results.
- Confirm that the DataTable controls work correctly: Search, columns
show/hide, export.
- Confirm that the page number information is correct as you navigate
through pages of results.
- Go to Administration -> Columns settings.
- Confirm that the columns configuration settings for the z3950_search
table in the "Cataloging" section works correctly. Changes made here
should be reflected in the table of Z39.50 search results.
- Test other tables which use columns configuration to confirm that the
changes made in this patch doesn't disrupt their behavior. Test that
any custom columns configuration are applied. For example:
- Administration -> Libraries
- Reports -> Saved reports
- Circulation -> Holds queue
Signed-off-by: George Williams <george@nekls.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Also fixes the mappings.yaml to use correct field name (left over issue from bug 19575), so reset mappings and reindex before testing.
Test plan:
1. Reset mappings and reindex biblios.
2. Check that tests in t/db_dependent/Koha/SearchEngine/Elasticsearch/QueryBuilder.t pass.
3. Try that all of the following year range type work in publication date search and year limit in advanced search:
yyyy
yyyy-yyyy
-yyyy
yyyy-
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch removed references to setting and getting the items.paidfor
field. Where it was used for display, in moredetail.pl, we replace it
with a query on the accountlines.
Test plan:
1) Apply patch
2) Pay off a LOST item
3) Check for the associated display of 'Paidfor?:' on the itemdetails
page
4) Writeoff a LOST item
5) Check that a 'Paidfor?:' is not displayed on the itemdetails page.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch will move the list item refund rules from a dedicated table to the circulation_rules table.
Test Plan:
1) Apply this patch
2) Run updatedatabase.pl
3) Verify lost item refund rules remain unchanged
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Agustin Moyano <agustinmoyano@theke.io>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Test plan:
1) Set all values in Default checkout, hold and return policy section on
circulation rules admin page, try for all libraries and for one specific
library. Save.
2) Click on unset and confitm
--> without patch, the Maximum total holds allowed value remains
--> with patch the unset removex Maximum holds value too
Signed-off-by: Agustin Moyano <agustinmoyano@theke.io>
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Test Plan:
1) Apply dependancies
2) Apply this patch set
3) Run updatedatabase.pl
4) Ensure holdallowed and hold_fulfillment_policy rules behavior remains unchanged
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Agustin Moyano <agustinmoyano@theke.io>
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
We had a mix of q||, q{} and '' in this one script. This followup just
makes them all conform to our standard style of q{}.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This gets rid of the warning "Use of uninitialized value $auto_share
in string ne at [...]" by initializing the variable with empty string.
Test plan:
1) Go to page cgi-bin/koha/admin/share_content.pl and unselect "Auto
subscription sharing". Click "Save".
2) Check plack-error.log and notice the warning "Use of uninitialized
value $auto_share [...]"
3) Apply the patch and repeat the previous steps but now this time the
warning is gone in plack-error.log.
4) Make sure the AutoShareWithMana syspref with and without the patch
is in unselected state after clicking "Save".
Sponsored-by: The National Library of Finland
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch adds columns configuration and export features to the
checkout history page.
This patch also removes some inline CSS: "overflow:hidden" from both the
checkout and holds history pages. This was breaking the table controls
tooltips, and didn't appear to me to be necessary.
To test, apply the patch and restart Plack (or restart_all on
kohadevbox).
- Open a patron's checkout history page in the staff client.
- The table of checkouts should have controls at the top.
for columns configuration and export/print.
- These controls should work correctly.
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
I've applied a patch on Mana test server. If you want to
test with your own Mana instance, do the folowing:
- checkout bug/22210 branch from
http://git.biblibre.com/biblibre/koha-mana.git
- run these sql queries on Mana database (we need an update DB method
i think):
- ALTER TABLE librarian ADD COLUMN name VARCHAR(50) AFTER email
- UPDATE librarian SET name = (SELECT CONCAT(firstname, ' ',
lastname))
- ALTER TABLE librarian DROP COLUMN firstname
- ALTER TABLE librarian DROP COLUMN lastname
Test plan
- set mana_config to "https://mana-test.koha-community.org",
- go to admin > Share content with Mana KB,
- set "Use Mana KB for sharing content" to yes,
- save,
- in the 2nd fieldset, enter a name and email,
- click on send to Mana KB,
- check that you got a token,
- you should receive an email (Mana KB registration)
- check the name is correct
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Move to admin
Add a permission
Remove descriptions from table
Clean up template
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Fixes handling of /0 selector in addition to several fixed field positions. Note that ff7-01-02 is in fact 00-01 in Zebra and that has been replicated here.
Test plan:
1. Before applying a patch, check from Elasticsearch (e.g. localhost:9200/koha_biblios/_search?q=_id:123) what is indexed in Elasticsearch for a record for date-entered-on-file, ff7-00, ff7-01, ff7-02 and lleader.
2. Apply the patch, update database and save the record again.
3. Verify that the contents of the forementioned fields is now correct in Elasticsearch.
4. Verify that tests pass: prove -v t/Koha/SearchEngine/Elasticsearch.t
Signed-off-by: Björn Nylén <bjorn.nylen@ub.lu.se>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Unfortunately, the tables here can't use a foreign key as one table uses null where the other uses
'*' This patchset alters the delete method so delete related rules. It is somewhat of a workaround until
all the columns in issuingrules are moved to circulation_rules
To test:
1 - Add some issuing rules in koha, making sure to set maxissueqty
2 - Check the DB: SELECT * FROM circulation_rules;
3 - note some circulation rules were created
4 - Delete your rules via the staff interface
5 - Check the DB, the circulation rules remain
6 - Apply patch
7 - Repeat
8 - Huzzah! The rules delete!
9 - Prove the tests, read the code
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
