In the regular situation, you can get itemtype via biblio and then
biblioitem as well as via biblioitem (at least when item-level_itypes
is set to biblio).
But since Koha unfortunately defined two relations in item, one for
biblioitemnumber (the good one) and one for biblionumber (redundant),
TestBuilder (correctly) builds one biblioitem and two biblios.
If you item-level_itypes to biblio record, this will result in failing tests
when calling AddReturn (in this case Koha/Patrons.t).
It will crash on:
Can't call method "itemtype" on an undefined value at C4/Circulation.pm line 1826.
Cause: AddReturn goes via the biblionumber to biblio and than to
biblioitems, and it does not find a biblioitem. (Not a fault from TestBuilder
but a database design problem.)
This patch makes a small change in AddReturn to retrieve the itemtype via
biblioitem. It actually is a shorter road than items->biblio->biblioitems.
Note: I do not test the Biblioitems->find call, since we already checked
the GetItem call before and we have a foreign key constraint.
I did not call $item->effective_itemtype since we still use GetItem; this
could be done later.
Adjusted Circulation/Returns.t too: If we add an item with TestBuilder and
we called AddBiblio before, we should link biblioitemnumber as well.
Test plan:
[1] Do not apply this patch yet.
[2] Set item-level_itypes to biblio record.
[3] Run t/db_dependent/Koha/Patrons.t. (It should fail.)
[4] Apply this patch.
[5] Run t/db_dependent/Koha/Patrons.t again.
[6] Run t/db_dependent/Circulation/Returns.t
[7] Git grep on AddReturn and run a few other tests calling it.
Note: Bugs 19070/19071 address three tests that call AddReturn too.
[8] In the interface, check in a book.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Note: Bugs 19070 and 19071 are already pushed. The command in comment #4
has all the tests successful.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
If the patron categories J, K, YA would not exist, Patrons.t would fail.
Test plan:
[1] Remove one of these patron categories.
[2] Run t/db_dependent/Koha/Patrons.t
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Same change as the first patch, but for the batch record
modification tool.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Changes the label from 'list of record numbers...' to
'List of biblionumbers or authority ids...' to make it
more clear to the user which kind of input is expected.
To test:
- Go to Tools > Batch record deletion
- Check the new description
- Decide if it's more clear or not
Signed-off-by: Marc Veron <veron@veron.ch>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
How to reproduce:
1. Get a multilingüal Koha like
http://demo1.orex.es/cgi-bin/koha/opac-changelanguage.pl?language=enhttp://demo1.orex.es/cgi-bin/koha/opac-changelanguage.pl?language=es-ES
2. Copy that urls to any web page in an other domain -it must be in some
host - and try to link to the spanish or english version,it will keep you in the same position.
3. Apply this patch and try again , everything should work fine .
Signed-off-by: Hugo Agud <hagud@orex.es>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Fixes misplaced columns introduced by previous patch and adds the "-" for phone
transport type.
To test:
1. Set SMSSendDriver system preference on
2. Go to intranet messaging preferences
3. By default you should see checkboxes for all messages for SMS
4. Ensure columns are not misplaced (pushing one column too much to the right)
5. Delete sms method from one of the messages in message_transports table
6. Observe that "-" is displayed instead of checkbox for that message for SMS
7. Repeat same for TalkingTechItivaPhoneNotification system preference.
By default it may not have transports in message_transports, so make sure
to assign some in order to have the checkboxes visible.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Fixes misplaced columns introduced by previous patch and adds the "-" for phone
transport type.
To test:
1. Set SMSSendDriver system preference on
2. Go to intra and OPAC messaging preferences
3. By default you should see checkboxes for all messages for SMS
4. Ensure columns are not misplaced (pushing one column too much to the right)
5. Delete sms method from one of the messages in message_transports table
6. Observe that "-" is displayed instead of checkbox for that message for SMS
7. Repeat same for TalkingTechItivaPhoneNotification system preference.
By default it may not have transports in message_transports, so make sure
to assign some in order to have the checkboxes visible.
https://bugs.koha-community.org/show_bug.cgi?id=8692
Signed-off-by: Michael Andrew Cabus <michael@bywatersolutons.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Bug 6726 had corrected the fact that when SMS is enabled the messaging table is missing a column.
Bug 6458 has broken this.
The SMS column is missing an else case with cell containing only "-" like other columns.
Test plan :
- set SMSSendDriver preference empty
- go to OPAC patron messaging
- column SMS should not be visible
- set SMSSendDriver preference not empty
- go to OPAC patron messaging
- column SMS appears with checkboxes
Signed-off-by: Michael Andrew Cabus <michael@bywatersolutons.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds a note to the system preferences autonembernum and
BorrowerMandatoryFields regarding a conflict if automembernum is on
and BorrowerMandatoryFields contains cardnumber.
To reproduce issue: See initial comment.
To test:
- Apply patch
- Verify that in system preferences note appears with both prefs
automembernum and BorrowerMandatoryFields
Followed test plan, works as described
Signed-off-by: Alex Buckley <alexbuckley@catalyst.net.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch fills the column 'Collection' in item search from the item values.
To test:
- Go to item search
- Reproduce issue from initial comment
- Apply patch
- Verify that the column 'Collection' is filled
Still to do, but outside of my datatable skills:
Filter by drop down in the column header does a substring search.
Example: Filter for 'Fiction" returns both 'Fiction' and 'Non-fiction' items.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Laurence Rault <laurence.rault@biblibre.com>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
On closing a basket, status is updated to ordered for orders not
completed. However the operation was resetting the status for
cancelled as well as new orders.
While display is correct from the basket view (it checks the
cancellation date). The status in the acquisitions tab from the
catalogue view reverts erroneously to ordered.
This patch adds cancelled to the statuses not updated on basket
close.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
The test messages were awkwardly phrased, re phrase them to
sound more natuaral. Patch is cosmetic (grammar) only
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
When the initial search is su=.../su:... the links was
not constructed correctly. With this change, it should
be the case.
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
The link changes the search links generated by the plugins
from an=authid to an:authid, as suggested by Jared on the
bug report.
- Turn on the AuthorityFile und ExplodedTerms plugins
for the OPAC from the "Did you mean" section of the
administration module
- Search a term in your OPAC where one or several
authorities exist.
A last name or a place name might work well.
- Verify that there are suggestions displayed on top of
your result list.
- Verify that the link created is something like:
/cgi-bin/koha/opac-search.pl?q=an=14084
- Apply patch.
- Verify the link has changed a little and still works
correctly:
/cgi-bin/koha/opac-search.pl?q=an:14084
Signed-off-by: Frédéric Demians <f.demians@tamil.fr>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Test plan:
1. Create a patron category with the dateexpiry value of 29/9/2017
2. Create a patron user from that patron category (which I'll refer to as patron A) with the date
expiry value of 1/10/2017 and submit the form
3. Notice that the manual dateexpiry you have submitted is correctly
displayed
4. Create a duplicate patron with the same firstname and surname and
patron A, and set the date expiry value of 1/10/2017 and submit the form
5. The form displays a duplicate patron message. Notice that the dateexpiry input box is empty now
6. Select the new member (not a duplicate member) option in the
messagebox
7. The form successfully submits and notice that the date expiry value
displayed is that of the patron category (i.e. it is 29/9/2017) not the
dateexpiry value of 1/10/2017 that you manually set for this patron
8. Apply patch
9. Repeat step 4
10. The form displays a duplicate patron message. Notice the dateexpiry input box still
contains the value you entered which is 1/10/2017. Select the new member
(not a duplicate member) option in the messagebox
11. The form successfully submits and notice that the date expiry value
displayed is 1/10/2017 that you manually set for this patron
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Adds logic from the previous fix to the brief patron summary
shown when checking a possible patron duplicate.
Bonus: Also fixes missing patron category description there.
To Test:
- Add 2 patrons
- Add a patron with the same surname and firstname as an
existing patron in order to trigger the duplicate message
- Click "View existing patron"
- Verify display is correct when existing patron is
- an organisation
- not an organisation
- Verify that the patron category description shows
Signed-off-by: Aleisha Amohia <aleishaamohia@hotmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Problem: A patron category "I" would cause display problems
on the details in the intranet. This is because the templates
confused patron category "I" with patron type "I" (organisation).
Patch:
- Cleans up variable confusion between categorycode and
categorytype.
- The template contained code to change the labels below
the address to 'Organisational phone:" etc., I have removed
this part as it does not match the edit form anymore.
- Initials, date of birth and gender are still hidden for
organisation - matching the edit form.
Bonus:
- The patron category description was missing on the
right and left side of the details tab. Now it displays.
- Fixes some html issues:
- doubled up class attribute in a tag
- doubled up </li></li>
To test:
- Create 3 patrons
- patron category code doesn't matter, but category type organisation
- patron category code 'I', category type NOT organisation
- patron category code NOT I, category type NOT organisaton
- Check details tab in patron account in staff for all 3
- Verify patron category description shows correctly
- Verify information added to the account displays correctly
(phone numbers, emails, ...)
Signed-off-by: Aleisha Amohia <aleishaamohia@hotmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Added one unit test when the syspref useDaysMode is active.
This does not move code anymore
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Test plan:
1. ReturnBeforeExpiry is activated
2. useDaysMode is different from "circulation rules only"
3. Set expiry date of a patron to a near date
4. Set a closed day on calendar for this date
5. Do a checkout
Without patch, return date will be patron expiration date
With the patch, return date will be last open day before patron expiration day
Signed-off-by: Claire Gravely <claire_gravely@hotmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Works as outlined in test plan, search terms now appear at top as h1 as well
Signed-off-by: Dilan Johnpullé <dilan@calyx.net.au>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
To test:
1) Go to Admin -> search for a system preference
2) Notice your search stays in the search box (this is inconsistent with
search behaviour across Koha)
3) Apply patch and refresh page
4) Make another search
5) Confirm search still works as expected and search terms have been
cleared from search box
6) Confirm search terms show at the top of the results
Sponsored-by: Catalyst IT
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Replaces some code by a call to existing module.
Removes the $@->code and $@->message calls.
Test plan
[1] Run /cgi-bin/koha/unapi?id=koha:biblionumber:[number]&format=marcxml
[2] Try some variations.
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This path merges the pager() test and adds search results count tests
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds ->is_paged to Koha::Objects. It is inherited from the underlying resultset
from DBIC so there's no code besides adding it to the known methods in AUTOLOAD.
Tests are added for the newly exported method.
To test:
- Apply this patch
- Run:
$ sudo koha-shell kohadev
k$ cd kohaclone
k$ prove t/db_dependent/Koha/Objects.t
=> SUCCESS: Tests pass!
- Sign off :-D
Sponsored-by: Camden County
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
To test:
1 - Set 'OverduesBlockCirc' to block
2 - Find or create a patron with overdues
3 - Perform a SIP patron lookup on that patron
misc/sip_cli_emulator.pl -a 127.0.0.1 -p 6001 -su term1 -sp term1 -l CPL
--patron {userid or cardnumber} --password {pass} -m patron_information
4 - Note the first character of response is a ' '
5 - Apply patch
6 - Restart memcached, apache, and plack
7 - Perform SIP patron lookup
8 - Note the first character of response is 'Y'
9 - prove t/db_dependent/SIP/Patron.t
10 - Test should return green
Signed-off-by: Chris Kirby <chris.kirby@ilsleypubliclibrary.org>
Works as advertised
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This subroutine is only used once and can easily be replaced with
Koha::Patron->holds->count
Test plan:
- Set maxreserves=5
- Place 3 holds for a given patron
- Place again 3 holds for this patron
3+3 > 5 => The holds must not be placed
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This subroutine is no longer in used and can be removed
Test plan:
git grep GetReservesToBranch
must not return any results
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
A recent change in Paypal has removed the previous default option of paying via debit or credit card without an account. To bring this option back, we need to send an additional parameter to the PayPal API.
Test Plan:
1) Enable paypal for your Koha instance
2) Ensure you are not logged in to PayPal
3) Attempt to pay a fine via PayPal
4) Not the the "Pay with Debit or Credit Card" option is missing
5) Apply this patch
6) Refresh opac-account.pl
7) Attempt to make a payment via PayPal again
8) Note the option "Pay with Debit or Credit Card" is now available
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: George Williams <gwilliams@nekls.org>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds status 'Damaged' to 'Information' 'Status' in the items
table on 'Place hold' page.
To test:
- Apply patch
- In staff client, try to place an item level hold for items with 'Damaged'
status.
- Verify that the status 'Damaged' appears in the column 'Information'.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
To test:
Enable Coce and disable other image services
Load a list and not there are no covers
Apply patch
Load a list and note there are covers
https://bugs.koha-community.org/show_bug.cgi?id=15924
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
The "Pay selected" option on the Fines tab in the borrower account page doesn't work as intended.
The fine on top of the list gets the amount deducted, even if another fine is choosen from the list.
Test Plan:
1) Create two or three fines, using the Create manual invoice function.
2) Choose one of the fines (not the one on the top) and click Pay selected
3) Pay a partial amount
4) Go back to the Pay fines tab an notice that the fine you selected has not changed. Instead, either the top fine or the total (see attachment) has ben affected.
5) Apply this patch
6) Repeat steps 1-3
7) Note the correct fine is paid
Signed-off-by: Andreas Hedström Mace <andreas.hedstrom.mace@sub.su.se>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds a language selector menu to the top menu of staff client
similar to the OPAC.
Display of language selectors at top, bottom or both can be configured
with system preference StaffLangSelectorModer. It defaults to bottom.
To test:
- Apply patch
- Udate database
- Restart plack and memchached
- Go to staff client, verify that language selector displays at
the bottom of the page (as before)
- Go to system preferences, verify that there is a new preference
StaffLanguageSelectorMode (name similar to the sypref ror OPAC), and
that it is set to 'footer'
- Change mode for top, both and footer and verify, go to staff client
and verify for each that the language selector displays as appropriate
(Amended for comment #2 2017-06-02 mv)
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Serhij Dubyk {Сергій Дубик} <serhijdubyk@gmail.com>
The "by" after the title was not translatable in the result
lists of the intranet. This patch fixes it by removing
a comment, that caused a problem with the translation
scripts.
To test:
Test:
Before this patch in file en-GB-marc-MARC21.po present next paragraph:
msgid "by "
msgstr " by "
According string "by " in the file MARC21slim2intranetResults.xsl can not be translated (in other languages).
After applying this patch performed next command:
cd /usr/share/koha/misc/translator
sudo env KOHA_CONF=/etc/koha/sites/mykohainstance/koha-conf.xml PERL5LIB=/usr/share/koha/lib perl -I /usr/share/koha/lib "./translate" update
Now in the file en-GB-marc-MARC21.po present the following (modified) paragraph:
msgid "by "
msgstr " by "
https://bugs.koha-community.org/show_bug.cgi?id=17827
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
To test:
1) Find a record with an item that has no itemtype (or remove the
itemtype of an item)
2) Go to Acquisitions -> Find a vendor or make a new one -> create a new
basket
3) Add the record from Step 1 to your basket
4) Close the basket
5) Go back to the vendor and click 'Receive shipments'
6) Put in an invoice number, click Next
7) Click the Receive link for your item
8) Confirm you see an internal server error
9) Apply the patch and refresh the page
10) The error should be gone and behaviour should continue as expected
Sponsored-by: Catalyst IT
Signed-off-by: Lee Jamison <ldjamison@marywood.edu>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
The link is the same as the 'Add patrons' button in Actions dropdown,
but requires one less click, and makes finding the contents of the list
more obvious.
To test:
1) Go to Tools -> Patron lists
2) Create a patron list if you haven't already
3) Confirm that clicking the name of the list takes you to the correct
list and shows the expected content.
Sponsored-by: Catalyst IT
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
So that it can be styled alongside other tables in the OPAC.
To test:
1) Log into staff side
2) Find OPACUserCSS syspref and add the following CSS:
thead {
color: red;
}
3) Log into the OPAC
4) Go to your fines, your search history, your reading history etc -
notice all of these table's headings are styled with red text
5) Go to your messaging. Notice this table's headings are not styled
with red text
6) Apply patch and refresh page
7) Your messaging table should now have red headings.
(You can delete the CSS from OPACUserCSS if you'd like.)
Sponsored-by: Catalyst IT
Signed-off-by: Jesse Maseto <jesse@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
if club has no enrolled patrons
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
If deleting the last club or template in a table, the row is deleted
from the webpage by ajax so the nice blue bubble message does not show.
This patch forces the page to reload so the blue bubble message shows
instead of the empty table.
To test:
Confirm that the blue message shows when tables are empty. Add a
template and a club, then delete a club. Confirm the page reloads and
the message shows. Test with template
Sponsored-by: Catalyst IT
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch
1) Hides the club templates table if there are no club templates, shows
an appropriate message
2) Hides the clubs table if there are no clubs. Shows an appropriate
message for whether templates exist
3) Puts the actions in one column, or a dropdown menu
Sponsored-by: Catalyst IT
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
The file koha-tmpl/opac-tmpl/bootstrap/en/includes/openlibrary-readapi.inc
exposes template directives to translation. The only string that should
appear in .po from this file is "Open Library: "
To test:
- Apply patch
- Verify that code changes make sense
- Bonus test: create a new language 'aa-AA', verify in aa-AA-opac-bootstrap.po
that there is only the following string for openlibrary-readapi.inc:
msgid "Open Library: "
msgstr ""
NOTE: Followed a test plan similar to bug 18776 comment 3
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
The file opac-tmpl/bootstrap/en/includes/masthead-langmenu.inc exposes following tt directive to translators:
"[%% IF ( ( opaclanguagesdisplay ) && ( ! one_language_enabled ) && "
"( languages_loop ) && ( OpacLangSelectorMode == 'both' || "
"OpacLangSelectorMode == 'top') ) %%] "
This patch fixes it.
To test:
- Apply patch
- Verify that language selector in OPAC (top of the page) works as expected
- Bonus test: create a new language 'aa-AA', verify that line above does not
show up in aa-AA-opac-bootstrap.po
NOTE: Followed a test plan similar to bug 18776 comment 3
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
The file opac-tmpl/bootstrap/en/includes/authorities-search-results.inc
exposes template directives to translation where translators should not
be confronted with.
Example:
"[%% PROCESS showreference heading=seeals.heading linkType='seealso' "
"type=seeals.type authid=seeals.authid %%] "
To test:
- Apply patch
- Verify that Authority search in OPAC works as before
- Bonus test: create a new language 'aa-AA', verify that line above
does not show up in aa-AA-opac-bootstrap.po
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
The file opac-tmpl/bootstrap/en/includes/item-status.inc exposes a template directive where translators should not be confronted with.
"%s %s [%%#- This include takes two parameters: an item structure and an "
"optional loan (issue) structure. The issue structure is used by course "
"reserves pages, which do not use an API to fetch items that populates item."
"datedue. -%%] %s %s %s %s "
This patch fixes new lines inside a tt directive (comment).
It is merely a string patch.
To test:
Verify that the code changes make sense.
(Bonus test: create a new language 'aa-AA', verify that line above does not
show up in aa-AA-opac-bootstrap.po)
NOTE: Followed test plan similar to bug 18776 comment 3.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
The file opac-memberentry.tt exposes template directives to translation where
translators should not be confronted with.
Example from po file:
"%s [%% UNLESS hidden.defined('B_address') && hidden.defined('B_address2') && "
"hidden.defined('B_city') && hidden.defined('B_state') && hidden."
"defined('B_zipcode') && hidden.defined('B_country') && hidden."
"defined('B_phone') && hidden.defined('B_email') && hidden."
"defined('contactnote') %%] "
To test:
- Apply patch
- Verify that advanced search in OPAC the page 'your personal details'
behaves as before
- Verify that you can change values and submit an update request
- Create a new translation for a 'language' aa-AA (perl translate create aa-AA)
- Verify that template directives ar no longer exposed in aa-AA-opac-bootstrap.p
NOTE: Followed test plan similar to bug 18776 comment 3.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
The file opac-advsearch.tt exposes template directives to translation where translators should not be confronted with.
Example in po file:
"[%% IF ( ( OpacAdvSearchOptions and OpacAdvSearchOptions.grep('itemtype')."
"size > 0 and not expanded_options ) or ( OpacAdvSearchMoreOptions and "
"OpacAdvSearchMoreOptions.grep('itemtype').size > 0 and expanded_options ) ) "
"%%] "
To test:
- Apply patch
- Verify that advanced search in OPAC behaves as before
- Create a new translation for a 'language' aa-AA (perl translate create aa-AA)
- Verify that template directives ar no longer exposed in aa-AA-opac-bootstrap.po
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
