Add an unallocated option to CreateQueue and pass through as needed
Avoid deletion of the tmp_holdsqueue, and only check holds
and items that are not currently matched
A future hold with a higher priority will still fail here - because the
item may already be assigned, but on next change to the biblio it would
be corrected
To test:
1) Apply both patches
2) Enable RealTimeHoldsQueue and set HoldsQueueSkipClosed to "open"
3) Add a holiday to the calendar for all libraries for today, visit:
/cgi-bin/koha/tools/holidays.pl
-- Click today's day on the calendar and pick "Holiday repeated every same day of the week"
-- Click "Copy to all libraries". Hit "Save.
4) Place a biblio-level hold on a biblio record and set the pickup location to a library that has available copies, visit:
-- /cgi-bin/koha/reserve/request.pl?biblionumber=76&borrowernumber=51
-- Click the first "Place hold" button to place the biblio-level hold.
5) Verify that that hold got added to the holds queue, visit:
/cgi-bin/koha/circ/view_holdsqueue.pl?branchlimit=&itemtypeslimit=&ccodeslimit=&locationslimit=&run_report=1
6) Place a biblio-level hold on a biblio record where there are no other holds and copies are available at another location, but not the pickup location, visit:
-- /cgi-bin/koha/reserve/request.pl?biblionumber=437&borrowernumber=51
-- On the "pickup at" dropdown, pick something else other than "Centerville", e.g. "Fairfield".
-- Click the first "Place hold" button to place the biblio-level hold.
7) Check the holds queue again, notice that this 2nd hold was not added to the queue:
/cgi-bin/koha/circ/view_holdsqueue.pl?branchlimit=&itemtypeslimit=&ccodeslimit=&locationslimit=&run_report=1
8) Run the updated cronscript:
perl misc/cronjobs/holds/build_holds_queue.pl --force --unallocated
9) Notice nothing changed in the holds queue, visit:
/cgi-bin/koha/circ/view_holdsqueue.pl?branchlimit=&itemtypeslimit=&ccodeslimit=&locationslimit=&run_report=1
10) Remove the holiday we created previously, visit:
/cgi-bin/koha/tools/holidays.pl
-- Click today's day on the calendar and pick "Delete this holiday"
-- Click "Copy to all libraries". Hit "Save.
11) Run the updated cronscript:
perl misc/cronjobs/holds/build_holds_queue.pl --force --unallocated
12) Confirm the second hold is added to the holds queue, visit:
/cgi-bin/koha/circ/view_holdsqueue.pl?branchlimit=&itemtypeslimit=&ccodeslimit=&locationslimit=&run_report=1
Signed-off-by: Pedro Amorim <pedro.amorim@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
We add a fallback to allow TICKET_RESOLUTIONS to be returned in the
strings_map as additional TICKET_STATUS states.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
We add a strings_map method to Koha::Ticket::Update and thus need
to have corresponding unit tests.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
We add a strings_map method to Koha::Ticket and thus need to have
corresponding unit tests.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This patch updates the unit test for the ticket_updates api to catch
both the missing test 'state' for the existing state change
functionality and also the new 'status' functionality introduced with
this patchset.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Test plan
- apply Bug 12802
- go to a patron's details page
- click on "Add message" in tools bar
- choose "Email" in "Add a message for"
- Select a notice (module members) or manualy fill the message
- Save
- Check the message is saved in message_queue table
Signed-off-by: Matthias Le Gac <matthias.le-gac@inlibro.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
I felt the switch to multi in the EmailFieldPrimary preference was a bit
confusing given that type exposes a 'select all' option which doesn't
make sense with the pre-existing 'first valid' option being an override
in the code.
This patch opts to switch it back to 'Choice', meaning that only one
option can be picked and adds a 'selected addresses' option which
prompts the use of a new 'EmailFieldSelection' preference which allows
for the multi-select as before.
To test:
1) Run though the test plan for 'Update notice_email_address method to
return a list' but with the following ammendments:
* 2) As aposed to being able to select multiple options under
EmailFieldPrimary, you should now only be able to select one option at
a time, but a new 'selected addresses' option should be present.
* 8) Select the 'selected addresses' option for 'EmailFieldPrimary' and
also select multiple fields for the new 'EmailFieldSelection'
preference.
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Axelle Clarisse <axelle.clarisse@univ-amu.fr>
Signed-off-by: Mathieu Saby <mathsabypro@gmail.com>
Signed-off-by: Aleisha Amohia <aleisha@catalyst.net.nz>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This patch updates the notice_email_address method to return a comma
separated list of addresses as expected by Email::Sender if you wish to
send mail to multiple To addresses.
To test:
1. Install database update and restart services
2. Go to Koha Administration -> system preferences. Search for EmailFieldPrimary. Confirm the options show as checkboxes and you can select multiple.
3. Search for a patron. Put different email addresses in each of the possible email fields (i.e. primary email, secondary email, alternate email).
4. Make sure 'first valid' is checked in EmailFieldPrimary.
5. Go to your patron, click the More dropdown and send a welcome email.
6. In your terminal, go into the database to view the message queue.
sudo koha-mysql instance
select * from message_queue\G
7. Confirm your welcome email is visible, with ONLY the first valid email in
the to_address field.
8. Select other combinations of emails in EmailFieldPrimary.
9. Send another welcome email to the same patron, then run the message_queue
SQL query again.
10. Confirm your welcome email is visible and shows all selected addresses
concatenated by , in the to_address field.
11. Enable KTD to send email [1] (without email configured you will not
be able to confirm the delivery to multiple addresses).
12. Run misc/cronjobs/process_message_queue.pl to trigger sending the
queued notices from above.
13. Check that the addresses in the to_address all actually recieve the
notice.
[1] To test sending emails using a Google account:
- Set up an App password for your Google Account
- Configure a new 'SMTP Server' under 'Administration > SMTP servers'
using the following settings where `User name` = your Google email
address and `Password` = your APP password, not your Google account
password):
Host: smtp.gmail.com
Port: 587
Timeout: 120
SSL: STARTTLS
User name: GOOGLEACCOUNTUSER
Password: GOOGLEAPPPASSWORD
- Set this server as default
Sponsored-by: St Luke's Grammar School & Pymble Ladies' College
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Axelle Clarisse <axelle.clarisse@univ-amu.fr>
Signed-off-by: Mathieu Saby <mathsabypro@gmail.com>
Signed-off-by: Aleisha Amohia <aleisha@catalyst.net.nz>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
The change for 005 makes some field compares fail. We should
exclude 005 in the local compare_fields sub.
We do NOT need the compare_fields from AuthoritiesMarc. Removing.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This patch adds geosearch to Koha (using Elasticsearch 7). ElasticSearch
search_mappings get new types to store lat/lon, which can be indexed
from MARC 034$s and 034$t. There is a small change to the DB to allow a
new value in search_field.type ENUM.
The QueryBuilder is extended to allow for building advanced
ElasticSearch Querys (eg geo_distance) that cannot be represented in a
simple string query. The UI for searching (including showing the results
on a OSM/Leaflet map) is implemented in a separate plugin
(https://github.com/HKS3/HKS3GeoSearch)
Test Plan:
* make sure you're running ElasticSearch 7
(eg via `curl http://es:9200?pretty | grep number`)
* apply patch
* got to a Framework, check Editor for 034$s and 034$t and save
* got to some books (in the correct framework) and enter some lat and lon into 034$s and 034$t (for example lat=48.216, lon=16.395)
* Run the elasticsearch indexer, maybe limited on the books you edited (-bn 123 -bn 456):
misc/search_tools/rebuild_elasticsearch.pl -b -v
* You can check if the indexing worked by inspecting the document in elasticsearch:
* get the biblionumber (eg 123)
* curl http://es:9200/koha_kohadev_biblios/_doc/123?pretty | grep -A5 geolocation
* You should get back a JSON fragment containing the lat/lon you stored
* You can query elasticsearch directly:
* Run the following curl command, but adapt the value for lat/lng and/or the distance (in meters)
* curl -X GET "http://es:9200/koha_kohadev_biblios/_search?pretty" -H 'Content-Type: application/json' -d '{"query": {"bool":{"must":{"match_all":{}},"filter":{"geo_distance":{"distance":100000,"geolocation":{"lat":48.2,"lon":16.4}}}}}}'
* To run the search via Koha, you need to either install and use https://github.com/HKS3/HKS3GeoSearch or create a handcrafted query string:
* handcrafted query string:
* /cgi-bin/koha/opac-search.pl?advsearch=1&idx=geolocation&q=lat:48.25+lng:18.35+distance:100km&do=Search
* HKS3GeoSearch
* install the plugin and enable it
* got to OPAC / Advanced Search
* There is a new input box "Geographic Search" where you can enter lat/long/radius
* On the search result page a map is shown with pins for each found biblioitem
Sponsored-by: ZAMG - Zentralanstalt für Meterologie und Geodynamik, Austria - https://www.zamg.ac.at/
Sponsored-by: Geosphere - https://www.geosphere.at/
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Additional finetuning:
- Fix update and remove fixed fixme
- Update test count as well
- fix last small issues raised in Comment 23
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Marie Hedbom <marie.hedbom@musikverket.se>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Now both AddBiblio and ModBiblio will insert 005 if not present.
Test plan:
Run t/db_dependent/Biblio.t
Add biblio record via acquistion order. Check 005 in the table
biblio_metadata.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Phil Ringnalda <phil@chetcolibrary.org>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Note: This routine does not check field existence like
ModBiblioMarc does/did (see next patch). So it inserts
a field 005 if it is not present.
Test plan:
Run t/SimpleMARC.t
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Phil Ringnalda <phil@chetcolibrary.org>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
We need to:
[1] Remove obsolete framework parameters if any (yes there are).
[2] Check scalar context calls if any (most probably not).
Ad 1:
How to find them? Git grep and look at each hit. You will need the -C
parameter to add a few context lines around the call even.
Found one in C4/Biblio.pm and six in Suggestions.t with ''.
Found one in C4/Items on a second line. Similar one in Koha/EDI.
Note: sub receipt_items in EDI has no unit tests yet.
Also did a few git searches like:
git grep GetMarcFromKohaField | grep -v -P "GetMarcFromKohaField.*;"| grep -P "GetMarcFromKohaField\s*\("
Note: Seeing still three lines; they are all fine. Last line comes from
testing to trigger the warn.
Ad 2:
Have been looking at each git grep line and did not spot any
scalar context call. Before this report, we had an example in
POD and the Biblio test only.
Try to find them by performing smarter git searches?
Did look again at results for:
git grep GetMarcFromKohaField | grep -v -P "\)\s*=\s*&?(C4::Biblio::)?GetMarcFromKohaField" | grep -v -P "use "
The tests from this grep are included in the last test plan line.
Test plan:
Read the patch.
Run t/db_dependent/Biblio/TransformHtmlToMarc.t
Run t/db_dependent/Items.t
Run t/db_dependent/Suggestions.t
Run prove t/Biblio2.t t/db_dependent/Biblio.t t/db_dependent/Filter_MARC_ViewPolicy.t t/db_dependent/Koha/Authorities.t t/db_dependent/Koha/Biblio/Metadata.t t/db_dependent/Koha/Filter/EmbedItemsAvailability.t t/db_dependent/Koha/SearchEngine/Search.t t/db_dependent/XISBN.t
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
The routine should be called in list context now.
Warns also about use of obsoleted framework parameter. This
is the case for several years already btw. But may help us
catch a forgotten occurrence? Can be removed later.
In a follow-up we will check for second parameters and
we will update calls in scalar context.
Test plan:
Prove t/db_dependent/Biblio.t
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Replacing wantarray by always returning all mappings.
In a few cases only we expect multiple ones.
Changing two calls to pick the first hit, and add comment about
the implicit assumption being made (as before, no behavior change).
Test plan:
Look at results of git grep GetMarcSubfieldStructureFromKohaField
Run t/db_dependent/Biblio.t
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This patch extends the TrackLastPatronActivity trigger to cover SIP status messages as well.
Other SIP messages like Checkin/Checkout should be covered by those values in system preference, so
should not need adjustment.
To test:
prove -v t/db_dependent/SIP/Message.t
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
If reserves.patron_expiration_date is set use it as holds
expiration date when waiting status is reverted.
To test:
1. Apply this patch.
2. Add hold for patron A and set expiration date manually.
3. Check in item on hold for patron A and confirm hold was
set as waiting.
4. Revert holds waiting status.
=> Hold should still have expiration date you set manually
in step 2.
5. Check that you have DefaultHoldExpirationdate and other
DefaultHold sysprefs set.
6. Add hold for patron B, but this time do not set expiration
date.
7. Check in item on hold for patron B, revert waiting status.
=> Hold should now have expiration date set based on
DefaultHold sysprefs.
Also prove t/db_dependent/Hold.t.
Sponsored-by: Koha-Suomi Oy
Signed-off-by: Esther <esther@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
When one reverts holds waiting status holds expiration
date is not set even if DefaultHoldExpirationdate
syspref is enabled. This patch adds new param
hold_reverted to be used when RevertWaitingStatus is
used to determine if expiration date should be set again.
To test:
1) Make sure you have DefaultHoldExpirationdate syspref enabled.
2) Find hold with status "Waiting".
3) Revert waiting status.
=> Note that hold has no expiration date set.
4) Apply this patch.
5) Repeat steps 2 and 3.
=> Expiration date should now be set based on reserve
date.
Also prove t/db_dependent/Hold.t.
Sponsored-by: Koha-Suomi Oy
Signed-off-by: Sam Lau <samalau@gmail.com>
Signed-off-by: Esther <esther@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This patch adds a new endpoint, for fetching checkouts from a specific
patron.
Test plan:
1. Apply this patch
2. Run:
$ ktd --shell
k$ prove t/db_dependent/api/v1/patrons_checkouts.t
=> SUCCESS: Tests pass!
3. Run:
$ curl -v -s -u koha:koha --request GET \
http://kohadev.local/api/v1/patrons/{id}/checkouts
test with query parameters (they are the same as for /patrons/{id}/holds
=> SUCCESS: The API works!
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This patch adds a method for retrieving the related *Koha::RecordSource* from a *Koha::Biblio::Metadata* object.
The method is covered by tests:
1. Apply this patch
2. Run:
$ ktd --shell
k$ prove t/db_dependent/Koha/Biblio/Metadata.t
=> SUCCESS: Tests pass!
3. Sign off :-D
Sponsored-by: ByWater Solutions
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Arthur Suzuki <arthur.suzuki@biblibre.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This patch adds support for setting the record source on the API. It
does so by adding support for a new header `x-record-source-id`.
Setting the record source is restricted to patrons with the
`set_record_sources` permission.
A 403 error is returned on an attempt to set it without the correct
permissions.
The feature is documented on the spec.
To test:
1. Apply this patch
2. Run:
$ ktd --shell
k$ prove t/db_dependent/api/v1/biblios.t
=> SUCCESS: Tests pass! Tests cover the right use cases!
3. Play with Postman (or similar)
4. Sign off :-D
Sponsored-by: ByWater Solutions
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Arthur Suzuki <arthur.suzuki@biblibre.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Sponsored-by: ByWater Solutions
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Arthur Suzuki <arthur.suzuki@biblibre.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Sponsored-by: ByWater Solutions
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Arthur Suzuki <arthur.suzuki@biblibre.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This patch makes the existing controllers use the new helpers for (most) 404 situations.
The remaining ones are subject to discussion.
To test:
1. Apply this patch
2. Run:
$ ktd --shell
k$ prove t/db_dependent/api/v1/
=> SUCCESS: Tests pass!
3. Sign off :-D
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This patch introduces two helpers to be used in controllers.
To test:
1. Apply this patch
2. Run:
$ ktd --shell
k$ prove t/db_dependent/api/v1/responses.t
=> SUCCESS: Tests pass!
3. Sign off :-D
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
prove t/db_dependent/api/v1/libraries.t
Signed-off-by: Pedro Amorim <pedro.amorim@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This patch adds the mentioned route. For the task it:
* Adds Koha::Cash::Register->to_api_mapping with trivial mappings
* Adds a cash_register object definition on the API spec
* Adds a controller to handle requests
* Adds tests for the new endpoint
To test:
1. Apply this patch
2. Run:
$ ktd --shell
k$ qa
=> SUCCESS: All green! Tests pass!
3. Play with Postman!
4. Sign off :-D
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Pedro Amorim <pedro.amorim@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This patch adds the mentioned endpoint. For it, it does:
* Add Koha::Desk->to_api_mapping
* Add desk.yaml with the correct data structure for desks
* Add the route to the spec
* Add tests
Note: Lucas and I had doubts about the right return value for when the feature is disabled.
I opted for returning 404 with a message telling the feature is disabled. This can be discussed.
To test:
1. Apply this patches
2. Run:
$ ktd
k$ qa
=> SUCCESS: All green, all tests pass!
3. Play with this using Postman.
4. Sign off :-D
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Pedro Amorim <pedro.amorim@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
We add an accessor for the related desks. Tests are added.
To test:
1. Apply this patch
2. Run:
$ ktd --shell
k$ prove t/db_dependent/Koha/Library.t
=> SUCCESS: Tests pass!
3. Sign off :-D
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Pedro Amorim <pedro.amorim@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Same as checkout but for holds, we need to provide a way to retrieve old
holds for a patron.
Test plan:
Create some holds for a patron, cancel and fulfill some, then use the
REST API endpoint with the new 'old' flag set to 1
/api/v1/patrons/42/holds?old=1
Signed-off-by: Matt Blenkinsop <matt.blenkinsop@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
