This patch adds a more extensible and flexible debarments system to Koha. The fields
borrowers.debarred and borrowers.debarredcomment are retained for compatibility and
speed.
This system supports having debarments for multiple reasons. There are currently
three types of debarments:
OVERDUES - Generated by overdue_notices.pl if the notice should debar a patron
SUSPENSION - A punative debarment generated on checkin via an issuing rule
MANUAL - A debarment created manually by a librarian
OVERDUE debarments are cleared automatically when all overdue items have been returned,
if the new system preference AutoRemoveOverduesRestrictions is enabled. It is disabled
by default to retain current default functionality.
Whenever a borrowers debarments are modified, the system updates the borrowers debarment
fields with the highest expiration from all the borrowers debarments, and concatenates
the comments from the debarments together.
Test plan:
1) Apply patch
2) Run updatedatabase.pl
3) Verify the borrower_debarments table has been created and
populated with the pre-existing debarments
4) Run t/db_dependent/Borrower_Debarments.t
5) Manually debar a patron, with an expiration date
6) Verify the patron cannot be issued to
7) Add another manual debarment with a different expiration date
8) Verify the 'restricted' message lists the date farthest into the future
9) Add another manual debarment with no expiration date
10) Verify the borrower is now debarred indefinitely
11) Delete the indefinite debarment
12) Verify the debarment message lists an expiration date dagain
13) Enable the new system preference AutoRemoveOverduesRestrictions
14) Set an overdue notice to debar after 1 day of being overdue
15) Check out an item to a patron and backdate the due date to yesterday
16) Run overdue_notices.pl
17) Verify the OVERDUES debarment was created
18) Return the item
19) Verify the OVERDUES debarment was removed
20) Disable AutoRemoveOverduesRestrictions
21) Repeat steps 15 though 18, verify the OVERDUES debarment was *not* removed
22) Add issuing rules so that an overdue item causes a temporary debarment
23) Check out an item to a patron and backdate the due date by a year
24) Return the item
25) Verify the SUSPENSION debarment was added to the patron
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
misc/commit_file.pl now properly displays the number
of replaced and ignored items.
misc/stage_file.pl now has a new command-line switch --item-action:
--item-action action to take if --add-items is specifed;
choices are 'always_add',
'add_only_for_matches', 'add_only_for_new',
'ignore', or 'replace'
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Prior to this patch, this script would only modify the date
created and modified fields; this patch changes the behavior
so that the fields can be created if they're not already present
in the record.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Mason James <mtj@kohaaloha.com>
Bug 9192: UNIMARC_sync_date_created_with_marc_biblio.pl field creation (followup)
Add tests :
if field < 10 it must not have a subfield
if field > 9 is must have a subfield
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Both patches applied, no koha-qa errors.
Bug 9192: followup fix typo
Fix typo on usage message.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Changes only strings in the script: the help text and the
success message for updated serial issues.
Thx to Jared for proof reading!
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Cosmetic changes:
* perltidy
* q{} for query
* list of columns is query instead of SELECT *
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Your cosmetic changes missed a comma, fixed in a followup
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Script serialsUpdate.pl must be set in crontab to run daily.
It checks serials that are late, modifies status and adds a note.
This patch adds some options :
--note : defined note, a defaut one is used if not defined
--no-note : disable automatic note
--verbose : used to control output
This patch also implements confirmation option "-c" who whas present but not used.
Test plan :
Run script on a database with late serials :
- serialsUpdate.pl -h
=> you get help text in output
- serialsUpdate.pl --man
=> you get full help
- serialsUpdate.pl -v
=> you get output of changed serials but database has not changed
- serialsUpdate.pl -c -v
=> you get output of changed serials and database has changed, with note "Automatically set to late"
- serialsUpdate.pl -c
=> database has changed without anything in output
- serialsUpdate.pl -c --note "LATE"
=> database has changed, with note "LATE"
- serialsUpdate.pl -c --no-note
=> database has changed with no note
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Works as described. No koha-qa errors.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script.
New options behave as described.
There are some existing problems with this script that I have noted
directly on the bug report.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch changes update_dbix_class_files.pl so that the connection
parameters to the reference database must be passed explicitly via
command-line switches, rather than grabbing them from the current Koha
context.
The purpose of this is to intentionally put up a roadblock to reduce
the chance that a developer (or release manager) accidentally updates
the schema files to include local testing cruft such as temporary
tables.
Usage is now as follows:
[1] Create an empty database
[2] Load the schema creation script into it, e.g.,
mysql -u dbic -pdbic dbic < installer/data/mysql/kohastructure.sql
[3] Run the schema updater:
./misc/devel/update_dbix_class_files.pl --db_user=dbic --db_name=dbic --db_passwd=dbic
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
updateDatabase.pl is a bit too close to updatedatabase.pl in installer
and may cause some confusion. I would suggest update_dbix_class_files.pl
as a unambiguous and descriptive name for this file.
Signed-off-by: wajasu <matted-34813@mypacks.net>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
* Added base class files for all tables in koha using
DBIx::Class::Schema::Loader.
* Added a (very basic) test file for C4::Context
* Also added dependencies in required files.
To Test:
[1] Install patch
[2] Make sure you can still connect to Koha
[3] You may optionally run this test script:
use Koha::Database;
use Data::Dumper;
my $db = Koha::Database->new();
my $schema = $db->schema();
print Dumper($schema->resultset("Borrower"));
If you run this file you should get a DBIx dump of the borrowers table.
Signed-off-by: wajasu <matted-34813@mypacks.net>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Test plan:
- add a fine for a patron
- verify the script does not delete this patron.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Works, script do not delete a patron with fines.
No koha-qa errors with all patches applied
Test
1) Added a fine to a patron
2) run script
3) reports condition
Trying to delete patron 5... Failed to delete patron 5: patron has 10.00 in fines
4) Patron is not deleted
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script.
Tested various combinations of options:
./delete_patrons.pl
Gives a helpful message about the use of the script.
./delete_patrons.pl -h
Outputs useful information about the use of the script
and its various options.
./delete_patrons.pl --category_code ST --library CPL
Gives the correct results in numbers and deletion was done
properly.
Also tested:
--expired_before
--not_borrowed_since
-v
Testing various conditions where a delete should not occur:
- Patron has checkouts
Patron is not in list of patrons to delete (x patrons to delete)
- Patron has fines
Patron is still in list of patrons to delete (x patrons to delete)
Checked deleted patrons had been moved to deletedborrowers.
Notes about possible enhancements:
- only print the success message 'x patrons deleted' when confirm
flag was set
- patrons with current checkouts are silently excluded from the number
of patrons to be deleted. Printing the number with current checkouts
might be helpful.
Changes made:
Fixed a small error in the documentation: expired_date is expired_before.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
[1] Patron deletion now happens atomically; if one part
of the process fails, the record isn't left in a
partially deleted state.
[2] The routine for handling lists properly during patron
deletion is now invoked.
[3] The script now prints an indication if it's run
without --confirm; otherwise, one might think that
patron records were actually being deleted.
[4] --verbose now actually does something.
Without --verbose, the script will print the dry-run
warning (if applicable), the number of patrons to be
deleted, and error messages.
With --verbose, the script will also print a line with
the borrowernumber of each patron to be deleted.
To test:
[1] Run the script with and without --verbose and compare
the, well, verbosity.
[2] Run the script without --confirm and note that the script
prints a message saying that it's running in dry-run mode.
[3] Use the script to try to delete one or more patrons that have
loans. Confirm that error messages are printed reporting
foreign constraints preventing the deletion. Also confirm that
no new rows are added to deletedborrowers for those patrons that
could not be completely deleted.
[4] Use the script to delete a patron that has a public list. Verify
that after the deletion, the public list still exists but now
has a null owner.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
[1] Use --library instead of --branchcode to be consistent
with other scripts and user-facing Koha terminology.
[2] Use --not_borrowed_since instead of --not_borrowered_since;
no need to expose typos in the API to the user.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This followup adds:
- execute flag (+x) for the cronjob script.
- replaces --dry-run with --confirm (according with existing scripts).
- changes output text (remove 'first person' style).
- updates the doc and simplifies the dates parameters.
- changes flags PrintError and RaiseError for the dbh in order to catch
something if an error occurs...
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch provides a cronjob script for deleting patrons.
It takes 3 options:
--not_borrowed_since
--expired_date
--category_code
See the perldoc misc/cronjobs/delete_patrons.pl.
Use the -v flag for a verbose mode.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Currently, if you launch the script
misc/load_testing/benchmark_staff.pl, it always displays
"Authentication successful" or continue to execute the script even if
nothing is done.
This patch checks if the url is right and if the authentication is
correctly done.
Test plan:
Suppose that a correct login/pwd is koha/koha
1/
perl misc/load_testing/benchmark_staff.pl --steps=1
--url=http://admin.koha.local/cgi-bin/koha/
--password="koha" --user="koha"
should produce:
Authentication successful
...
Step 1
...
2/
perl misc/load_testing/benchmark_staff.pl --steps=1
--url=http://admin.koha.local/cgi-bin/koha/
--password="KOHA" --user="KOHA"
should produce:
Authentication failure: bad login/password
3/
perl misc/load_testing/benchmark_staff.pl --steps=1
--url=http://admin.kobe.local/cgi-bin/koha/
--password="koha" --user="koha"
should produce:
Authentication failure:
500 Can't connect to admin.kobe.local:80 (Bad
hostname)
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Comment: Works as described, detects bad url and user credentials.
No koha-qa errors
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described and gives better error messages.
There are some warnings output when running the script before
and after applying the patch.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch adds functionality to forgive overdue fine when an item is
set to lost status. Fines are forgiven only when the syspref
WhenLostForgiveFine is set to yes. Item can be set to lost status from:
- catalogue/moredetail.pl
- cataloguing/additem.pl
- tools/batchMod.pl
- misc/cronjobs/longoverdue.pl
Changed subroutine C4::Circulation::LostItem to forgive fines on the
item depending on the value of syspref WhenLostForgiveFine. This
routine is currently used to return an item and charge a replacement
cost.
Also added a new syspref in C4::Circulation::LostItem -
WhenLostChargeReplacementFee. The replacement fee will now be charged
only if this syspref is set to yes. The default value of the
WhenLostChargeReplacementFee is yes, meaning that current behavior
will not change during upgrade.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Alex Hatley <alexh@cctexas.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Testing notes on last patch in series.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
For PDF generation, HTML files need explicit <br /> HTML tags. With
this patch, carriage return are replaced by <br /> when letters are
written into HTML files.
Test plan :
- Ensure you've got at least one reader with overdue triggering notice
- Ensure that your notice template got HTML checked
- Run misc/cronjobs/overdue_notices.pl -v -n -html <dirname>
and misc/cronjobs/printoverdues.sh <dirname>
Without patch, the content of the letter is all on one line in PDF file
With the patch, PDF file is correctly formated
- remove your reader email
- Run misc/cronjobs/overdue_notices.pl -v -html <dirname>
and misc/cronjobs/printoverdues.sh <dirname>
Without patch, the content of PDF file is all on one line
with the patch, PDF file is correctly formated.
- restore reader email
- run misc/cronjobs/overdue_notice.pl -v -html <dirname>
Verify that the a message has been generated in message_queue table
With or without patch, the message is the same
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
The synopsis for the -html option used to be:
-html <filename> Output html to file
but the argument to this option should actually be a directory,
not a filename. This patch fixes the synopsis.
To test:
- Run perldoc misc/cronjobs/overdue_notices.pl
- Check that the synopsis is as shown above
- Apply this patch
- Run perldoc misc/cronjobs/overdue_notices.pl
- Check that
- the synopsis asks for a directory, not a filename
- that the description of the -html option further down in the
perldoc now mentions the filename that the HTML file will be
created with.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Works as described. No koha-qa errors.
If feeded with a filename -html option fails with many messages like
print() on closed filehandle $html_fh at misc/cronjobs/overdue_notices.pl line 384.
Perhaps it could be improved, but that was the old behavior.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Improves documentation, no negative side effects found.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch removes three cronjobs that are believed to be
unused for the following reasons:
[1] The commit message that introduces them indicates that they
were written for a particular library. A staff member from
that library has confirmed that they are not in use.
[2] The scripts have received essentially no patches since they
were introduced except for being caught up in a broader
code-improvement patch.
[3] They refer to a column that no longer exists in biblioitems.
[4] They no longer adhere to guidelines for command-line utilities,
and there's been no sign that anybody has felt the urge to
correct that.
[5] They are not referenced by another code or the manual, and
the mailing list archives do not include any substantive discussion
of their use.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch replaces carriage return with <br /> in the content of
hold notices for printing. This is necessary to convert html file
into well formatted pdf file.
Test plan :
- check in an item reserved by a borrower
that has not activated email notification
- verify in message_queue table that you've got a
new HOLD_PRINT notice with status 'pending'
- run gather_print_notices.pl <directory>
Without the patch, the script generates a html file without <br /> tags.
If you run printoverdues.sh <directory>, the text in the resulting PDF
file is all on one line
With the patch, the script generates a html file with <br/> tags and
the PDF file created by printoverdues.sh is well formatted.
Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Add an option to cleanup_database.pl to purge the search_history
entries older than X days.
Test plan:
- Apply patch
- Check that your test DB has some entries a little older than 30 days
and a few ones even older than that in search_history:
SELECT * FROM search_history WHERE time < DATE_SUB( NOW(), INTERVAL 30 DAY );
If not, modify some existing entries.
- Run cleanup_database with a fixed number of days (replace XX with
something higher than 30)
/misc/cronjobs/cleanup_database.pl --searchhistory XX
- Check that entries older than XX days got deleted from search_history
- Run without the day parameter
/misc/cronjobs/cleanup_database.pl --searchhistory
- Check that entries older than 30 days got deleted from search_history
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Fixes the following koha-qa.pl error:
FAIL misc/cronjobs/overdue_notices.pl
OK pod
OK forbidden patterns
OK valid
FAIL critic
# Variables::ProhibitConditionalDeclarations:
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
If there is no active currency, when running overdue_notices.pl
you get a sofware error "Can't use an undefined value as a HASH
reference" on GetCurrency() function call.
With this patch, if there is no active currency, fines are formated
by default 0.00 and notices are correctly generated.
Test plan :
- have at least one borrower with overdue that should trigger a notice
- verify that there is no active currency (Adminitration > Currency &
Exchange rates)
- run misc/cronjobs/overdue_notices.pl -v -n (to get the notice directly
on output)
=> without the patch you get the software error
=> with the patch, notices are correctly generated
If an active currency is defined, the script overdue_notices.pl runs
the same with or without patch
Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
The variables for AUTH_INDEX_MODE and ZEBRA_TOKENIZER were not
being saved to the koha_install_log file. As a result when using the
--prev-install-log option in Makefile.PL the user was still prompted
to select them.
This patch adds the appropriate variables to the list saved in
the install log.
To test:
On a (non-package) system installed/upgraded without the patch running
'perl Makefile.PL --prev-install-log /path/to/koha-install-log' will
still prompt you to choose authorities indexing mode and select
between chr and icu, after upgrading with this patch applied the same
command should get the responses from the install log and not require
user intervention.
The values can be seen written into misc/koha-install-log
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
From the bug report:
At the end of printoverdues.sh, an archive is generated
containing all files present in directory given as parameter.
As archives are generated in this given directory, they
contain previously generated tar files, creating oversized files.
Only .pdf files should be archived
All tests and QA script pass.
Worked ok in my tests, only packign PDF in the given directory.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch adds a new maintenance script: cmp_sysprefs.pl
Test plan:
1 Run with -cmd backup -file zz01. Check that file.
Run with -cmd test -file zz01. Check zz01.sav.
2 Run with -cmd compare -file zz01. No differences expected.
3 Edit zz01: delete two prefs, change two prefs and add two new prefs.
4 Run with -cmd compare -file zz01. Are all six changes reported?
5 Add local use preference zz02 in the staff client (no explanation, options).
6 Run with -cmd backup -file zz02.
7 Delete local use pref zz02 from the staff client.
8 Run with -cmd restore -file zz02. Check if local pref zz02 came back.
9 Delete local use pref zz02 again from the staff client.
10 Run with -cmd compare -file zz02 -add. Check if local pref zz02 came back.
11 Change the value of zz02 in the staff client.
12 Run with -cmd compare -file zz02 -add. Check the value: not updated?
13 Run with -cmd compare -file zz02 -upd. Check the value: updated now?
14 Edit file zz02. Add a comment line and delete the line for pref zz02.
15 Run with -cmd compare -file zz02 -del. Is pref zz02 deleted?
16 Add local use preference zz02 in the staff client (WITH explanation).
17 Run with -cmd compare -file zz02 -del. pref zz02 should not be deleted.
18 Run with -cmd compare -file zz02 -del -ign-opt. zz02 should be deleted now.
Do the next steps only on a restorable test db:
19 Create file zz03. Leave it empty.
Compare with: -cmd compare -file zz03 -del -ign-opt.
All prefs gone except Version?
20 Restore with: -cmd restore -file zz01.sav.
Compare with -cmd compare -file zz01.sav. Nothing reported?
Note: The explanation or options are not recovered. (See also BZ 10199.)
This affects local use preferences only.
If you need them, restore your test db. Remove the zz files.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Amended patch
Only cosmetic stuff:
Perltidied with xt/perltidyrc.
Replaced most double quotes by single quotes around SQL statements.
Moved the usage into POD for pod2usage.
Passing no file shows help screen too.
Counting the db updates more accurately with return value of do.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
You can now specify a number of days with the --mail parameter. Only
mails older than the specified number of days will be deleted.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
To test:
0) Don't apply the patch yet.
1) Have the CataloguingLog system preference set to 'Log'.
2) Import a file of bibliographic records with bulkmarcimport.pl.
3) Check the state of CataloguingLog system preference -- it will be
set to 'Don't log'.
4) Apply the patch.
5) Repeat steps 1-3. The CataloguingLog system preference
will be 'Log'.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Comment: No test plan, but works.
Tested adding auth, biblios or both, then rebuilding -z
No errors.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Test Plan
1/ run misc/mod_zebraqueue.pl -a 1
2/ In your koha db
SELECT * FROM zebraqueue WHERE done = 0;
Check that a row for authority record id 1 has been inserted
3/ run misc/mod_zebraqueue.pl -b 1
4/ In your koha db
SELECT * FROM zebraqueue WHERE done = 0;
Check that a row for biblio record id 1 has been inserted
5/ run misc/mod_zebraqueue.pl
Make sure the help is sensible
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Without this patch, the -f param (for the translate script) add the
modified line in the po file BUT comment all lines from others files.
This patch concat the generated file with the previous one and merge
them. This way produce a pretty po file with all our strings :)
+ Modification in LangInstaller.pm to fix a bug when the -f param was not
given.
Test plan:
1/ Update your po file :
cd misc/translator
perl translate update fr-FR
git commit -a -m"TMP PO"
2/ Modification on 2 files:
ie.
catalogue/advsearch.tt:32 <h1>Advanced search Foo</h1>
catalogue/issuehistory.tt:38 <th>Patron Bar</th>
3/ Update your po file with only the first file:
perl translate update fr-FR -f advsearch.tt
4/ Edit your po file and check that only the foo string is present (or
git diff).
5/ Update your po file with only the second file:
perl translate update fr-FR -f issuehistory
6/ Edit your po file and check that 2 strings are present (or git diff).
7/ Change the translation for these 2 strings and delete the fuzzy
lines.
8/ Install the first file for your language:
perl translate install fr-FR -f advsearch.tt
9/ Edit your translated file and verify the string is translated. Check
that the issuehistory.tt file is not changed.
10/ Same for issuehistory:
perl translate install fr-FR -f issuehistory
11/ stash your modification in your tt files (or reset --hard):
git stash
12/ Check in your po file that the 2 strings are commented (git diff).
13/ To finish, install all template files and check that they are
replaced correctly:
perl translate install fr-FR
Signed-off-by: Frédéric Demians <f.demians@tamil.fr>
I have squashed the both follow-up patches.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
The previous version of tmpl_process3.pl says in the pod:
-i, --input=SOURCE Get or update strings from SOURCE file.
SOURCE is a directory if -r is also specified.
But is was not possible to specify one or more files.
This patch allows us to give one or more specific file with the -f
parameter.
for eg.:
perl tmpl_process3.pl install -i /home/koha/koha-tmpl/opac-tmpl/prog/en/modules/
-o /home/koha/koha-tmpl/opac-tmpl/prog/fr-FR/modules/
-s /home/koha/misc/translator/po/fr-FR-i-opac-t-prog-v-3006000.po
-r
-f opac-account.tt
-f opac-main.tt
You can specify:
-f advsearch.tt => translate all files with a filename containing
'advsearch.tt'
or
-f search => will translate acqui/histsearch.tt, acqui/z3950_search.tt, etc.
Bug 9161: Followup: Add a -f param for the translate script
Now you can directly call the translate script
(misc/translator/translate) with the -f parameter
eg.:
./translate install|create|update -f search.tt -f main.tt
Signed-off-by: Frédéric Demians <f.demians@tamil.fr>
I've squashed the 3 patches, and reported doc into 'translate' script.
It works as advertised.
Side note: It would be great to extend this functionnality in order to
be able to apply the translation to XSL files stored outside Koha
directories hierarchy. Useful to translate site-specific XSLs defined
with XSLTResultsDisplay, and other sysprefs.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
With this patch, header is created when creating a new syspref .po file
for a new language (translate create), and is added if it doesn't
already exist when updating an existing language (translate update).
To test:
(1) Create a new language syspref file:
./translate create -p xx-XX
Check that there is an header
(2) Update an existing syspref file without header:
./translate update fr-FR
Check that fr-FR-pref.po has a header
(3) Update an existing syspref file with header:
Modify fr-FR-pref.po. Add an email, or whatever.
./translate update fr-FR
Check that fr-FR-pref.po has a header with the manual modification
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Comment: Work as described. No errors.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
All tests and QA script pass.
Also tested that updated pref files can still be installed correctly.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Currently, the perl path for get_report_social_data.pl is "#!/bin/perl"
when it should be "#!/usr/bin/perl".
While I'm not entirely sure how to test this, rangi did mention:
23:47 (it wouldnt work on my debian install)
23:48 zsh: no such file or directory: /bin/perl
It's a pretty trivial change, so I'm not sure it needs much of a test
plan.
Signed-off-by: Magnus Enger <magnus@enger.priv.no>
Before the patch "grep -r '#!/bin/perl' in the misc dir shows one file
with this line, and it is indeed get_report_social_data.pl. After the
patch there are no occurrences left.
Passed-QA-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
