This patch makes the spec match the voted RFC.
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch adds the display of requested partner email addresses when an
ILL backend provides the ability to send requests to partners. Partner
email addresses are displayed in the illlist and illview displays, they
are also included in the 'illrequests' API response.
* api/v1/swagger/paths/illrequests.json:
- Add 'requested_partners' as an 'embed' enum
* Koha/Illrequest.pm:
- Add 'requested_partners' accessor calling optional backend 'get_requested_partners' method.
- Store requested partners upon email send, calling optional backend 'set_requested_partners' method.
- Add 'requested_parners' embed to overloaded TO_JSON method.
* koha-tmpl/intranet-tmpl/prog/en/modules/ill/ill-requests.tt:
- Add 'requested_partners' embed to illrequests API call
- Add render function for "Additional status" datatables column
- Add display of requested partner email addresses to illlist table
- Add display of requested partner email addresses to illview display
To test:
1) Enable Interlibrary loans
2) Add a backend that supports sending requests to partners, e.g.
FreeForm
3) Set up at least one partner
4) Create an ILL request
5) Send request to partner(s)
6) Observe partner(s) email address(es) are displayed in "View ILL
requests" view
7) Observe partner(s) email address(es) are displayed in "Manage ILL
request" view
Signed-off-by: mmg@interleaf.iehttps://bugs.koha-community.org/show_bug.cgi?id=20653
Bug 20563: (follow-up) Fix requested partners
As per:
https://bugs.koha-community.org/bugzilla3/show_bug.cgi?id=20563#c10
Thanks for the suggestion on merging the "Status" and "Additional status" columns, looks much better!
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch adds the "Columns settings" values for the illrequests table
Signed-off-by: Niamh.Walker-Headon@it-tallaght.ie
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Bug 21063: Add ability to show / hide columns
This patch adds the "Column visibility" functionality to the main ILL
request list table.
To test:
- Ensure ILL is enabled and you have some requests
- Apply patch
- From the "Koha administration screen, select "Configure columns"
- In the "Columns settings" page:
=> TEST: Ensure an "Interlibrary loans" category exists
- Upon expanding the category:
=> TEST: Ensure a table is displayed showing columns
=> TEST: Ensure the "action" column has "Cannot be toggled"
pre-selected
=> TEST: Change values for columns and ensure they're saved
- From the main staff menu, select "ILL requests"
- In the table:
=> TEST: Click the "Column visibility" button and ensure a modal
containing all columns (except "Action") is displayed
=> TEST: Select various columns and ensure they are shown and hidden
Signed-off-by: Niamh.Walker-Headon@it-tallaght.ie
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Bug 21063: (follow-up) Add user ID to column list
As originally specified in bug 20883, there is a requirement for some
users to be able to display the user ID (borrowernumber) in the UI.
This patch adds that ability to this bug, 20883 will be marked as a
duplicate of this one.
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Bug 21063: (follow-up) Amendments for rebase
Modify to add the additional changes required now we're rebasing on top
of the dependency tree. Includes adding additional columns (and changing
indexes for search/filter where appropriate)
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Bug 21063: (follow-up) Add comments to column list
Since this bug is now dependent on Bug 18591 (Allow an arbitrary number
of comments on ILLs) we need to add the comments column to this table
and the list of selectable columns. This patch does this.
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Bug 21063: (follow-up) Sanitize datatable data
This mitigates bug 22268 by sanitizing data prior to display using the
built in $.fn.dataTable.render.text() helper provided by Datatables.
The patch was added here, rather that in 22268 since this is the bug
that introduced the problem by increasing the number of fields that are
displayed in the table, some of which could contain user provided
malicious data
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch removes the possibility to access the patron object
identified by patron_id by the patron itself, or a guarantor.
It does so by removing the permissions from the spec. The tests are
adjusted to remove that use case.
To test:
- Apply this patch
- Run:
$ kshell
k$ prove t/db_dependent/api/v1/patrons.t
=> SUCCESS: Tests pass!
- Sign off :-D
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
We now return placed_formatted and updated_formatted, the API spec
should reflect this
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
With the introduction of the /public namespace all other endpoints, the
rest of the endpoints are restricted to privileged users.
This patch makes the GET /libraries and GET /libraries/:library_id
endpoints require 'catalogue' permissions.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch makes the original implementation match what is specified on
the RFC [1].
The controller is updated, and so the tests.
To test:
- Apply this patches:
- Run:
$ kshell
k$ prove t/db_dependent/api/v1/libraries.t
=> SUCCESS: Tests pass!
[1] https://wiki.koha-community.org/wiki/Libraries_endpoint_RFC
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Benjamin Rokseth <benjamin.rokseth@kul.oslo.kommune.no>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
CRUD for libraries via REST API.
GET /api/v1/libraries - List all libraries
GET /api/v1/libraries/{branchcode} - Get one Library
POST /api/v1/libraries - Add new Library
DELETE /api/v1/libraries/{branchcode} - Delete Library
Test plan:
- apply patch
- run tests: t/db_dependent/api/v1/libraries.t
- test API with some API tool or simple curl
e.g.:
curl http://host:port/api/v1/libraries
curl http://host:port/api/v1/libraries/cpl
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Benjamin Rokseth <benjamin.rokseth@kul.oslo.kommune.no>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch removes the possibility to access the city objects without
privileged access (minimum permissions == catalogue).
It does so by adding the required permissions to the spec. The tests are
adjusted.
To test:
- Apply this patch
- Run:
$ kshell
k$ prove t/db_dependent/api/v1/cities.t
=> SUCCESS: Tests pass!
- Sign off :-D
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
As voted when the RFC was discussed, the attribute gets renamed. The
tests are adjusted accordingly.
To test:
- Run:
$ kshell
k$ prove t/db_dependent/api/v1/patrons_password.t
=> SUCCESS: Tests pass!
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Alex Arnaud <alex.arnaud@biblibre.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Alex Arnaud <alex.arnaud@biblibre.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
So far the administration module only allowed for 2 permissions:
- circulation conditions (manage_circ_rules)
- everything else (parameters_remaining_permissions)
With this patch almost every section of the administration page
will have its own granular permission.
To test:
- Create different staff users:
1) One with parameters_remaining_permissions
2) One with parameters
3) One with catalogue and no parameters
4) One superlibrarian
- Apply the patch
- Run the database update
- Check the staff users:
1) All subpermissions, but manage_circ_rules
should be checked
2) Nothing should have changed
3) manage_item_serach_fields shoudl be checked
(page had catalogue permission before)
4) Nothing should have changed
- Try different settings of the permissions and
verify that
- Administration page behaves correctly
- Administration menu behaves correctly
! You shoudl only see what you have permission for
https://bugs.koha-community.org/show_bug.cgi?id=14391
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Barry Cannon <bc@interleaf.ie>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch makes the tests for 'authorized' session use the
'stockrotation' permission instead of 'superlibrarian'.
The path x-koha-permission is fixed accordingly.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
The stock rotation feature adds a batch process to automate rotation of
catalgue items with a staff client page under tools to manage rotas/schedules.
Once a rota is configured, and your staff user has the right permissions
to allocate items, then an additional tab will appear on biblio records
allowing the management of of which rota, if any, individual items belong to.
It also includes a cron script to process the items on a daily basis.
Signed-off-by: Kathleen Milne <kathleen.milne@cne-siar.gov.uk>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Edit: I removed a temporary file
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch splits the balance to match this object schema:
{
balance => #,
outstanding_credits => {
total => #,
lines => [ credit_line_1, ..., credit_line_n ]
},
outstanding_debits => {
total => #,
lines => [ debit_line_1, ..., debit_line_m ]
}
}
This change is made to ease usage from the UI. Also because the
outstanding credits need to be applied to outstanding debits in order to
the balance value to make sense. So we still need to have each total.
Tests are added for this change, and the schema files are adjusted as
well.
To test:
- Apply this patch
- Run:
$ kshell
k$ prove t/db_dependent/api/v1/patrons_accounts.t
=> SUCCESS: Tests pass!
- Sign off :-D
staff_id is changed into user_id as voted on the dev meeting the RFC got
approved.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch adds the OpenAPI spec for the following paths:
- /patrons/{patron_id}/account
It also adds object definitions for:
- balance
- account line
Account line is to be used on both /account/lines (when implemented)
and for embeding the outstanding lines in the balance endpoint
(/patrons/{patron_id}/account).
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
It implements only the "client credentials" flow with no scopes
support. API clients are tied to an existing patron and have the same
permissions as the patron they are tied to.
API Clients are defined in $KOHA_CONF.
Test plan:
0. Install Net::OAuth2::AuthorizationServer 0.16
1. In $KOHA_CONF, add an <api_client> element under <config>:
<api_client>
<client_id>$CLIENT_ID</client_id>
<client_secret>$CLIENT_SECRET</client_secret>
<patron_id>X</patron_id> <!-- X is an existing borrowernumber -->
</api_client>
2. Apply patch, run updatedatabase.pl and reload starman
3. Install Firefox extension RESTer [1]
4. In RESTer, go to "Authorization" tab and create a new OAuth2
configuration:
- OAuth flow: Client credentials
- Access Token Request Method: POST
- Access Token Request Endpoint: http://$KOHA_URL/api/v1/oauth/token
- Access Token Request Client Authentication: Credentials in request
body
- Client ID: $CLIENT_ID
- Client Secret: $CLIENT_SECRET
5. Click on the newly created configuration to generate a new token
(which will be valid only for an hour)
6. In RESTer, set HTTP method to GET and url to
http://$KOHA_URL/api/v1/patrons then click on SEND
If patron X has permission 'borrowers', it should return 200 OK
with the list of patrons
Otherwise it should return 403 with the list of required permissions
(Please test both cases)
7. Wait an hour (or run the following SQL query:
UPDATE oauth_access_tokens SET expires = 0) and repeat step 6.
You should have a 403 Forbidden status, and the token must have been
removed from the database.
8. Create a bunch of tokens using RESTer, make some of them expires
using the previous SQL query, and run the following command:
misc/cronjobs/cleanup_database.pl --oauth-tokens
Verify that expired tokens were removed, and that the others are
still there
9. prove t/db_dependent/api/v1/oauth.t
[1] https://addons.mozilla.org/en-US/firefox/addon/rester/
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch introduces two functions to the patrons endpoint:
- _to_api
- _to_model
This are in charge of field mappings in order to comply with the
guidelines.
Koha::REST::V1:Auth is adjusted to handle 'patron_id' as well. 'borrowernumber'
handling is kept until the existing endpoints get updated.
To test:
- Apply the patches
- Run:
$ kshell
k$ prove t/db_dependent/api/v1/*.t
=> SUCCESS: Tests pass!
- Sign off :-D
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch removes the $ref occurences for borrowernumber in not
patron-specific endpoints. 'borrowernumber' is still used on them, but as a
hardcoded parameter. The param rename will happen on a separate bug for
each endpoint.
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Benjamin Rokseth <benjamin.rokseth@kul.oslo.kommune.no>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch refactors the original work so it implements the controllers
and the spec using Mojolicious::Plugin::OpenAPI, and OpenAPI for the specification.
It removes the ability for patrons without permissions to edit their own data or their
guarantee's. This will be moved to a patron modification requests endpoint for simplicity.
It makes use of bugs 19410 and 19686 and their dependencies to deal with parameters handling,
query building and pagination.
Tests are adapted.
To test:
- Apply this patches and the dependencies
- Run:
$ kshell
k$ prove t/db_dependent/api/v1/patrons.t
=> SUCCESS: Tests pass!
- Sign off :-D
Sponsored-by: ByWater Solutions
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Benjamin Rokseth <benjamin.rokseth@kul.oslo.kommune.no>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds support for add, edit and delete patrons via REST API.
GET /api/v1/patrons Get patron list from params
GET /api/v1/patrons/<borrowernumber> Get single patron
POST /api/v1/patrons Create a new patron
PUT /api/v1/patrons/<borrowernumber> Update data about patron
DEL /api/v1/patrons/<borrowernumber> Delete a patron
Revised Test plan:
1) Apply this patch
2) Run tests perl t/db_dependent/api/v1/patrons.t
3) Add a user with proper rights to use the REST API
4) play with your favourite REST client (curl/httpie, etc.):
Authenticate with the user created above and get a CGISESSION id.
Use the CGISESSION to add, edit and delete patrons via the API.
5) Use PUT /patrons/<borrowernumber> for a patron without borrowers
flag. This should go into pending patron modification status and
needs to be accepted by a librarian.
Please note there is no validation of body input in PUT/POST other
than branchcode,category,userid,cardnumber.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Benjamin Rokseth <benjamin.rokseth@kul.oslo.kommune.no>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch implements the changes required by the cities endpoint RFC
[1].
It uses the objects.search helper, and relies on bug 19686.
To test:
- Apply the patches
- Compare the spec with the RFC (api/v1/swagger/definitions/city.json)
=> SUCCESS: It makes sense
- Run:
$ kshell
k$ prove t/db_dependent/api/v1/cities.t
=> Tests pass!
- Sign off :-D
Signed-off-by: Claire Gravely <claire.gravely@bsz-bw.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Fields 'address' and 'city' have been maybe nullable by this bug. This
patch makes them nullable on the API as well.
To test:
- Run:
$ kshell
k$ prove t/db_dependent/api/v1/patrons.t
=> FAIL: Tests fail (randomly) when address or city are set to null by
TestBuilder.
- Apply this patch
- Run:
k$ prove t/db_dependent/api/v1/patrons.t
=> SUCCESS: Tests pass!
- Sign off :-D
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
There is something wrond here, the userenv is no set and so we cannot
user search_limited.
Should we set the userenv or filter on the libraries using
libraries_where_can_see_patrons?
WAITING FOR FEEDBACK HERE.
Signed-off-by: Signed-off-by: Jon McGowan <jon.mcgowan@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Test plan:
1/ Use your usual "REST testing" tool to place a title-level hold with
an itemtype. The request should look like this:
POST /api/v1/holds
{
"borrowernumber": 1234,
"biblionumber": 456,
"branchcode": "CPL",
"itemtype": "A"
}
2/ Check that the hold was placed and the itemtype is correctly selected
3/ prove t/db_dependent/api/v1/holds.t
Signed-off-by: Benjamin Rokseth <benjamin.rokseth@kul.oslo.kommune.no>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch re-adds some parameters I left out during some rebasing tasks
and ended up on a separate patchset (bug 18731).
The introduced parameters definitions are only used on endpoint definitions
that implement (at least) pagination. No need to test them here but easier
adding them here than on a patch implementing a new enpoint, which would become
a dependency for other endpoints.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch moves the current endpoint implementation from Swagger2 to
the OpenAPI plugin.
It also takes advantage of the overloaded Koha::Illrequest::TO_JSON method
which has now the option to embed what's needed for the REST api.
The path spec is adjusted to fit OpenAPI, and some minor fixes are
applied:
- Missing 'metadata' query param
- 'ill' permissions should be required instead of 'borrowers'
- Full test coverage
To test:
- Apply this patch
- Run:
$ kshell
k$ prove t/db_dependent/api/v1/illrequests.t
=> SUCCESS: Tests pass!
- Sign off :-D
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Magnus Enger <magnus@libriotech.no>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Benjamin Rokseth <benjamin.rokseth@kul.oslo.kommune.no>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This Commit is at the heart of adding an interlibrary loans framework
for Koha. The framework does not prescribe a particular workflow.
Instead it provides a general framework that can be extended &
implemented by individual backends whose responsibility it is to
implement a specific workflow.
The module is largely self-sufficient: it adds new tables to the Koha
database and touches only a few files in the Koha source tree.
Primarily, we add our files to the Makefile and the koha-conf.xml,
define ill paths for the REST API, and introduce links from the main
intranet, opac pages & user permissions.
Outside of this we simply add new files & functionality.
Signed-off-by: Magnus Enger <magnus@libriotech.no>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Benjamin Rokseth <benjamin.rokseth@kul.oslo.kommune.no>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Trying to clarify some of the descriptions.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch introduces an /acquisitions/vendors endpoint.
To test:
- Apply the patch
- Run:
$ sudo koha-shell kohadev
k$ prove t/db_dependent/api/v1/acquisitions_vendors.t
=> SUCCESS: Tests pass
- Sign off :-D
Sponsored-by: ByWater Solutions
Signed-off-by: Matthias Meusburger <matthias.meusburger@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
operationId has the following documentation:
"Unique string used to identify the operation. The id MUST be unique among all
operations described in the API."
This patch modifies operationIds to be unique accross our API operations.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Before this file grows, we should sort it alphabetically.
To test:
1. prove t/db_dependent/api/v1
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Mojolicious::Plugin::OpenAPI does not support x-mojo-around action. This patch
removes it from our specification document.
Signed-off-by: Olli-Antti Kivilahti <olli-antti.kivilahti@jns.fi>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Also
- adding some missing and new response definitions into Swagger spec.
- fixing failing tests due to Bug 17932's change of boolean values
To test:
1. prove t/db_dependent/api/v1/holds.t
Signed-off-by: Olli-Antti Kivilahti <olli-antti.kivilahti@jns.fi>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Also:
- adding some missing and new response definitions into Swagger spec.
To test:
1. prove t/db_dependent/api/v1/cities.t
Signed-off-by: Olli-Antti Kivilahti <olli-antti.kivilahti@jns.fi>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Also:
- adding some missing and new response definitions into Swagger spec.
- fixing failing test due to Bug 17932's change of boolean values
To test:
1. prove t/db_dependent/api/v1/patrons.t
Signed-off-by: Olli-Antti Kivilahti <olli-antti.kivilahti@jns.fi>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Test plan:
prove api/v1/swagger/definitions/patron.json
must return green
Signed-off-by: Lee Jamison <ldjamison@marywood.edu>
swagger/definitions.t test returns green
Andrew Isherwood
Jiří Kozlovský
Katrin Fischer
Julian Maurice
Benjamin Rokseth
Alex Sassmannshausen
Lari Taskula