Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch makes about.pl warn about a missing upload_tmp_path entry in
koha-conf.xml. It also mentions the effectively used tmp dir.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds current date and time, formatted as configured.
It makes the timezone name be displayed the system uses it (important
for the 'local' use case).
It removes some warnings too.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds C4::Context->timezone bad timezone handling.
The calculated 'effective' timezone is tested with the right tool and a
fallback to 'local' is added. A warning is printed in the logs.
A test for this is added to about.pl too, along with the right warning
messages in case of problems.
Tests are added for both invalid TZ and to make sure the warning is
raised.
To test:
- Apply the patch
- Run:
$ kshell
k$ prove t/timezones.t
=> SUCCESS: All tests pass
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Before patch: No timezone section
After patch: timezone section at bottom of
Server information tab.
Actual is what is being used. Config overrides environment variables.
So if there is confusion why the environment variables aren't working,
it will be visible why.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch makes the existing code for SCO use the new permissions schema
for self check modules. Specifically addresses this change:
circulate => self_checkout
becomes
slef_check => self_checkout_module
about.pl checks are dejusted too.
get_template_and_user gets refactored to avoid code duplication and the
conditions are adjusted for the new permissions.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds Elasticsearch related information to the 'About' page.
The information is gathered and displayed only when the 'SearchEngine' syspref
is set to 'Elasticsearch'. It displays configured nodes, and the status:
- Running
- Not running
In case it is running, it displays the defined indices and the document count on each.
If there are configuration problems, exceptions are catch and a convenient warning
message is displayed.
To test:
- Apply this patches
- Run:
$ kshell
k$ prove t/Koha/SearchEngine/Elasticsearch.t
=> SUCCESS: Tests pass!
- Have ES configured in your koha-conf.xml file (by default in kohadevbox)
- Set the 'SearchEngine' syspref to 'Elasticsearch'
- Comment out pieces of the elasticsearch-specific entries (server, index_name,
the whole elasticsearch block). Reload on each change.
=> SUCCESS: Warning messages are displayed and make sense in the context of your changes.
----> the rest of the tests require having ES running on the dev env. This can be easily
achieved by creating the kohadevbox using:
$ KOHA_ELASTICSEARCH=1 vagrant up
- Stop the 'elasticsearch' service:
$ sudo service elasticsearch stop
- Reload about.pl
=> SUCCESS: The configured nodes are displayed, and the status is 'not running'
- Start the 'elasticsearch' service:
$ sudo service elasticsearch start
- Reload about.pl
=> SUCCESS: The configured nodes are displayed, the status is 'running' and
created indices info is displayed, along with the document count
on each index.
- Sign off :-D
Signed-off-by: David Bourgault <david.bourgault@inlibro.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds checks to the configured (or fallback) partner_code.
It produces two different warnings:
- Configured partner_code doesn't match an existing patron category
code.
- partner_code is not defined, a fallback to ILLLIBS is done
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
5/ This patch makes Koha::Illrequest->load_backend raise an exception
if the passed backend is invalid. This way we will catch more errors introduced.
The patch also disables the 'New Ill request' when no backends are available. Gets
rid of a related warnings.
Both OPAC and Intranet now display a warning message when no backends
are available.
Tests are added for the load_backend changes.
4/ This patch fixes the path for the checkboxes jquery plugin, and removes the include
for tablesorter, as this implementation uses Datatables. This is obviously code for older
Koha, ported to master.
TODO: There's something wrong on the styling. My idea is to get rid
of the custom column visualization tool, and have it display as regular
DataTables. We can then introduce the use of colvis on a separate bug
report.
Note: POD coverage for the exceptions file is wrongly tested. It is a false positive.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Fixes the table alias in the SQL statement for items and
adds items to the if clause for showing data problems.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
See the following wiki page for more information
https://wiki.koha-community.org/wiki/DBMS_auto_increment_fix
Test plan:
Create (at least) a patron, a checkout, a biblio and a hold
Then fill the old_* or deleted* tables with:
INSERT INTO deletedborrowers SELECT * from borrowers WHERE borrowernumber=XXX;
INSERT INTO deletedbiblio SELECT * from biblio WHERE biblionumber=XXX;
INSERT INTO old_issues SELECT * from issues WHERE issue_id=XXX;
INSERT INTO old_reserves SELECT * from reserves WHERE reserve_id=XXX;
Go to the about page, 'System information' tab. You should see a new
"Data problems" section with the list of the ids that are wrong
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
The code is duplicated, variable are not set ($_), code is hard to read,
not covered by tests and the subroutine has 2 completely different
behaviors depending on the presence of the "module" parameter.
No need more ti rewrite it.
Test plan:
- Use koha_perl_deps.pl with the different options (-u -m -a -i)
- Go on the about page, "Perl modules" tab
You should not see any differences from before and after this patch
Signed-off-by: David Cook <dcook@prosentient.com.au>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
We need to tell the administrators that it would be great for them to
set this config entry.
Test plan:
- Do not set template_cache_dir and confirm that you see the warning
- Set template_cache_dir and confirm that you do not see the warning
Signed-off-by: Magnus Enger <magnus@libriotech.no>
Both templates for koha-conf.xml are updated. After applying the
patach a warning was correctly displayed. After adding
template_cache_dir to koha-conf.xml and restarting memcached it
went away.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
The memcached config can be read from ENV or koha-conf.xml
In order to remove any ambiguity, let's inform the user which config is
used.
Test plan:
1/ Define the memcached config in ENV and $KOHA_CONF
=> Go on about page, you should get a warning
2/ Define the memcached config in ENV and not in $KOHA_CONF
=> Go on about page, you should get a warning
3/ Do not defined the memcached config in ENV or $KOHA_CONF
=> Go on about page, you should get a warning
4/ Define the memcached config in $KOHA_CONF and not in ENV
=> Go on about page, you should not get a warning, this is the expected
config
Followed test plan, works as expected.
Signed-off-by: Marc <veron@veron.ch>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
If plack is started with memcached, memcached will be considered as
running, even if it has been stopped (or crashed).
This case should be highlighted on the about page.
Note that I am not sure about the consequences of this specific case!
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
If no namespace is defined in ENV or the config, "koha" is used as the
default memcached namespace (See Koha::Cache->new)
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch adjusts the original one so it works on top of 17189
and 11921. It adds an 'Effective caching method' text which can
be useful, when memcached is not available.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch adds a row in the About > System information tab, showing
the current configuration for memcached.
To test:
- Apply this patch, have memcached configured for the current instance (this is the
default in kohadevbox)
- Make sure you have the memcached server running:
$ sudo service memcached start
- Open the about page in the browser
=> SUCCESS: You get something like:
Memcached: Servers: 127.0.0.1:11211 | Namespace: koha_kohadev | Status: running
- Stop the memcached server:
$ sudo service memcached stop
- Reload the about page
=> SUCCESS: You get something like
Memcached: Servers: 127.0.0.1:11211 | Namespace: koha_kohadev | Status: not running
- Set both MEMCACHED_* variables in the apache config for intranet the empty string:
$ sudo vim /etc/apache2/sites-enabled/kohadev.conf
..
SetEnv MEMCACHED_SERVERS ""
#"127.0.0.1:11211"
SetEnv MEMCACHED_NAMESPACE ""
#"koha_kohadev"
..
- Restart apache:
$ sudo service apache2 restart
- Reload the about page
=> SUCCESS: You get something like:
Memcached: Servers: undefined| Namespace: undefined | Status: unknown
- Sign off :-D
Sponsored-by: ByWater Solutions
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
To test
1/ Go to the about page, notice error
2/ Apply patch
3/ Notice error gone
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch adds a warning to the about page if the syspref 'StatisticsFields' is misconfigured.
Additionally, the text on Home > Administration > SystemPreferences for 'Statistics Fields'
is changed.
To test:
- Apply patch
- Edit syspref 'StatisticsFields'. Verify that the explanation makes sense.
- Leave field empty
=> verify that no message appears on About page, tab System information
- Insert valid field names, e.g. location|itype
=> verify that no message appears on the About page
- Add trailing char
=> verify that the warning message appears on the About page
- Fill in some garbage or misspell a field name
=> verify that the warning message appears on the About page
Signed-off-by: Aleisha <aleishaamohia@hotmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
The 'borrower' should not be used anymore, especially for new code.
This patch move files and rename variables newly pushed (i.e. in the Koha
namespace).
Test plan:
1/
git grep Koha::Borrower
should not return code in use.
2/
Prove the different modified test files
3/ Do some clicks in the member^Wpatron module to be sure there is not
an obvious error.
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works as described. Tested with Circulation, Members/Patrons, Discharge,
Restrictions modules and the must common functionalities
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
Most part of the code here is unnecessary complex. We should selected
the currency if it is selected, that's all :)
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
This patch changes about.pl to get version information from
C4::Context where applicable and fixes missing display of
the Apache version e.g. for Apache/2.2.22
To test:
- Without patch, open about page in staff client
- Remember contents of tab 'Server information'
(e.g. make a screenshot)
- Apply patch
- Verify, that the About page displays the same information
as before rsp. additionally displays Apache version if
it was missing without patch.
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works as described
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
This patch introduces a test for psgi/plack in %ENV and uses that data
to report in the about page.
To test:
- On current master (without Plack), go to about.pl
- Notice no mention of Plack
- Apply the patch
- Reload the about page
=> SUCCESS: No change
- Enable plack, and access the about page through Plack
=> SUCCESS: There is a PSGI label, showing that you are running Plack
- Sign off :-D
Regards
PS: I haven't tested the mod_perl scenario, I just grabbed the MOD_PERL env var
from the docs.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Note: Made a little change, changed He should have, to They should have
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
New warning on the about page if at least a patron has requested a
privacy on checkin but the AnonymousPatron is not set to a valid patron.
Works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
This patch introduces checks on the about.pl page so the user is warned
for a deficient configuration.
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
This patch makes about.pl query the running Apache version using
the apache2ctl command. I tested it on Apache 2.2 and is backwards
compatible (it is present in both).
To test:
( On an Apache 2.4 setup )
- Go to the about page
=> FAIL: "Apache version:" is empty
- Apply the patch
- Reload the page
=> SUCCESS: "Apache version:" shows the correct version.
- Sign off :-D
If you have an Apache 2.2 setup to try it, verify that there are no regressions
(trivial because you can run apache2ctl manually and verify the first result is the expecte).
Regards
PS. I even changed the order in which Apache version is tested because
most people is using Debian/Ubuntu and it was the last option.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Tested with apache 2.2/2.4, no errors
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Only tested with 2.4
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
It will permit not to run another perl interpreter.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
When setting zebra_bib_index_mode to grs1 I get two warnings when not applying the patch:
"The <zebra_bib_index_mode> entry is set to grs1. GRS-1 support is now deprecated and will be removed in future releases. Please use DOM instead by setting <zebra_bib_index_mode> to dom (full reindex required)."
"You have set <use_zebra_facets> but the <zebra_bib_index_mode> is not set to dom. Falling back to legacy facet calculation."
When applying the patch a third warning appears in addition to the two previous ones:
"The <zebra_bib_index_mode> entry is set to dom, but your system still appears to be set up for grs1 indexing."
Seems like the patch does what it should to me regarding the configuration mismatch warning.
Signed-off-by: Eivin Giske Skaaren <eskaaren@yahoo.no>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Chris Nighswonger <cnighswonger@foundations.edu>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
http://bugs.koha-community.org/show_bug.cgi?id=9987
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
System information indicates missing <zebra_bib_index_mode> and <zebra_auth_index_mode> entries in koha-conf.xml.
This patch
- adds warnings about a possible mismatch between these settings and the actual setup
- adds info about the actual setup/what values to use for <zebra_bib_index_mode> and <zebra_auth_index_mode> if they are not set.
The assumption is that a path including 'zebra-*-dom.cfg' in the respective section indicates a DOM setup.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Test plan:
Verify about>Timeline is correctly encoded
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Replaced <encoding by <:encoding.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch changes the text for zebra_auth_index_mode and zebra_bib_index_mode
entries missing on koha-conf.xml telling the user GRS-1 is deprecated.
It also adds another check for those preferences set to GRS-1, and shows a
warning message if set to grs1.
To test:
- Apply the patch and try all combinations:
- zebra_auth_index_mode and zebra_bib_index_mode missing
- zebra_auth_index_mode and zebra_bib_index_mode set to grs1
- Sign off :-D
Regards
Signed-off-by: Frederic Demians <f.demians@tamil.fr>
I've played with the 3 related koha-conf.xml file parameters:
zebra_auth_index_moda, zebra_bib_index_mode missing, and use_zebra_facets.
Inconsitencies are properly reported in About page thanks to this patch. It
would be helpfull to admin upgrading their Koha installation.
And by the way, thanks Tomas for the new Zebra facets functionnality. It's a
'joy' to see it into Koha.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, no problems found.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch adds two checks to about.pl:
- use_zebra_facets entry presence in koha-conf.xml
- use_zebra_facets==1 and zebra_bib_index_mode==dom
The idea is to alert the user if it has conflicting or wrong settings. Even
if there's a fallback to a working configuration.
To test:
- On clean master install, go to the about page
=> SUCCESS: No warnings regarding use_zebra_facets
- Comment out the use_zebra_facets entry, reload
=> SUCCESS: The about page mentions the use_zebra_facets entry is missing
- Uncomment the use_zebra_facets entry, make sure it is set to 1
- Change zebra_bib_index_mode to 'grs1', reload
=> SUCCESS: The about page says zebra_bib_index_mode is not set to DOM even though
you have use_zebra_facets set.
- Sign off :-D
Regards
To+
Sponsored-by: Universidad Nacional de Cordoba
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Followed test plan with success
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, tested by changing the koha-conf.xml file.
Note: There is no warning if use_zebra_facets is 0.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch adds information about required perl module versions to the
'About' page.
To test:
Apply patch.
In staff client, go to 'About', tab 'Perl modules'
The required version numbers should display in small print next to or
underneath the module names.
Signed-off-by: Nick Clemens <nick@quecheelibrary.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Currently there's no way for the user to know he has a bad QueryParser configuration.
Koha would just fallback to not using it.
This patch adds a check for QueryParser configuration sanity in about.pl
To test:
- Have UseQueryParser = "Don't try"
- Go to More > About Koha > System information
- No QueryParser-related warnings
- Set UseQueryParser = "Try"
- Go to More > About Koha > System information
- On a normal setup you shouldn't have any QueryParser-related warnings
- Edit your koha-conf.xml file and change the queryparser_config entry to a
non-existent filename.
- Reload More > About Koha > System information
=> SUCCESS: a warning message tells you the filename used, and says it failed.
- Now just delete the entry in koha-conf.xml
- Reload More > About Koha > System information
=> SUCCESS: a warning message tells you don't have the queryparser_entry in
your koha-conf.xml file.
Subtest:
a - The file /etc/koha/searchengine/queryparser.yaml exists:
=> SUCCESS: a warning saying it used a fallback is shown
b - The file doesn't exist
=> SUCCESS: Missing entry warning, plus a failure message for the fallback.
- Sign off :-D
Regards
To+
Sponsored-by: Universidad Nacional de Cordoba
Followed test plan. Works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
With the typo in the path (non existing file), 'no warnings' is stil shown
below the warnings. The follow-up fixes that.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Since we switched to Template Toolkit we don't need to stick with the
sufix we used for HTML::Template::Pro.
This patch changes the occurences of '.tmpl' in favour of '.tt'.
To test:
- Apply the patch
- Install koha, and verify that every page can be accesed
Regards
To+
P.S. a followup will remove the glue code.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
To test:
- Have a clean master install
- Verify that koha-conf.xml contains valid entries for:
zebra_bib_index_mode and
zebra_auth_index_mode
- Go to More > About Koha > System information
=> No "Warnings regarding the system configuration"
- Apply the patch
- Go to More > About Koha > System information
=> No "Warnings regarding the system configuration"
- Edit your koha-conf.xml file commenting one or both indexing mode
entries.
- Go to More > About Koha > System information
=> You get "XML configuration file" warnings for each commented entry.
Sponsored-by: Universidad Nacional de Cordoba
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch displays a warning on the About page when no active currency
is defined.
Test plan:
1)
Make sure that no currency is defined as active
(Home › Administration › Currencies & Exchange rates › Currencies)
2)
Go to Home › About Koha > System information
Result: No warning issued.
3)
Apply patch and reload About page
Result: Warning issued.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch makes about.pl test if success opening history.txt, and
shows a convenient warning to the end user. No more warnings in the logs
(about.pl: readline() on closed filehandle $file at /usr/share/koha/intranet/cgi-bin/about.pl line 166)
and better problem solving information for the end user.
Sponsored-by: Universidad Nacional de Cordoba
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch supplies a default value for the koha-conf.xml
setting docdir to handle the case where the user neglects
to set it upon upgrade.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Fixes dev and standard installs without docdic tag in koha-conf.xml.
Doesn't break when docdir present either. Warning still present
on packages install that didn't add the docdir definition in koha-conf.xml
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch makes Makefile.PL put the history.txt file in the right places
depending on the chosen setup layout, adds a reference to that place in
koha-conf.xml (and debian template version), and finally tweaks about.pl to
use it.
To test, apply the patch and verify that perl Makefile.PL runs fine, and
installing in
- dev
- single
- standard
layouts works as expected. Then go to the about.pl page and see if Koha's
history shows there.
Then, build your packages and test on your newly created instances.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Add a warning in the system information tab of the about page.
Test plan:
Set OPACPrivacy = 1 and AnonymousPatron = 0 and go on the about page,
tab 'system information'. Check that the warning appears.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Mason James <mtj@kohaaloha.com>
http://bugs.koha-community.org/show_bug.cgi?id=6509
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Removed NoZebra vestiges. This comprises several code blocks that depend on the NoZebra syspref and NZ related functions/methods.
C4::Biblio->
GetNoZebraIndexes
_DelBiblioNoZebra
_AddBiblioNoZebra
C4::Search->
NZgetRecords
NZanalyse
NZoperatorAND
NZoperatorOR
NZoperatorNOT
NZorder
C4::Installer->
set_indexing_engine
Sponsored-by: Universidad Nacional de Córdoba
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This patch use DataTable, see BUG|BZ 6836
- css/datatables.css
- lib/jquery/plugins/jquery.dataTables.min.js
- js/datatables.js
http://bugs.koha-community.org/show_bug.cgi?id=7167
Bug 7167 follow-up
Major changes:
* creating database tables for update on the fly, the 1st time the update script is called
* version is checked on mainpage.pl (and here only). If syspref Version differ from kohaversion.pl, the old updatedatabase is launched. If there are updates missing from new mechanism, the updatedatabase page is reached
* kohaversion check on each page is now useless in Auth.pm, removed dead code
* Updated installer: at the end of the process, retrieve all updates and automatically mark them "OK", as they're included in installer
Minor changes:
* adding copyright
* adding poddoc
* updating a warning, for better clarity
* switching from $$var to $var->
* small TT glitch fixed in updatedatabase.tt
* about.pl now returns the Version systempreference PLUS all the patches that have been applied
Bug 7167 follow-up perlcritic & numbers display & partial apply depending on DEBUG
* add use strict to updatedatabase, that is now perlcritic compliant
* partial apply of DB revs is now managed by DEBUG env variable = if DEBUG=0, the user can just apply every DBrev. If DEBUG=1, we're in a dev env, the user know has the option to apply DBrevs one by one
Display:
* in updatedatabase, small spelling changes
* in about.pl, remove 0 just after . (3.06.01 is displayed as 3.6.1)
* improve the display of applied numbers on about.pl
- before this patch, if you have N, N+1, N+2, N+3 and N+10 DB rev applied, about was displaying : , N+1 / N+2 / N+3 / N+10
- after this patch you have N......N+3 / N+10
* add ORDER BY into list_versions_already_knows to have number retrieved in the same order whatever the order they are applied
http://bugs.koha-community.org/show_bug.cgi?id=6679
Signed-off-by: Chris Nighswonger <cnighswonger@foundations.edu>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Chris Nighswonger <cnighswonger@foundations.edu>
Bug 7167: Improve the update.pl script
* Added CLI options to update.pl
* Call update.pl from the installer.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Chris Nighswonger <cnighswonger@foundations.edu>
Bug 7167: Now, we check versions on mainpage.pl and after login
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Chris Nighswonger <cnighswonger@foundations.edu>
Bug 7167: Reimplementing Marcel's suggestions & fixes
* Fixing the bugguy old version check (that was made against 3.0900000 instead of 3.0900027 -the last current kohaversion number
* in the CLI script, if there is nothing to report, just say it
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Bug 7167: Remove check_coherency
As suggested by Katrin, we've removed the call to check_coherency. It intended to provide readable comments when some SQL was wrong. Removing this sub result in the SQL error being displayed. That's OK because the sysadmin or the developer can google the error, understand it, then fix it.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Chris Nighswonger <cnighswonger@foundations.edu>
Bug 7167: Changing in .sql parsing
We first split on delimiter and then extract comments. You can now put
\n for delimiter comments.
ex:
DELIMITER ;
-- this is a comment
SELECT * FROM my_table;
-- another comment
Before this patch, we had to write:
DELIMITER ;
-- this is a comment;
SELECT * FROM my_table;
-- another comment;
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Chris Nighswonger <cnighswonger@foundations.edu>
Bug 7167: Add .pl and .sql examples
Those files are in version directory, so will never be executed by the updater
If you want to provide an update, do it in a 3.09/ directory (if your update is expected for 3.10 version)
Note that the updater use a md5sum checker. So, if the same update is in 2 different places, it will be detected. That will be handy for changes made on both stable and master: a library running stable will get the update when updating. When upgrading to the next major release, Koha will detect the patch has already been applied, and no error will be thrown. With the previous mechanism, a DBRev ported to stable was re-executed when upgrading to master, resulting in a nasty (but usually harmless) error message
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Chris Nighswonger <cnighswonger@foundations.edu>
Bug 7167: Improve display + factorize get_queries
Despite it's size, this patch is dealing with display questions only:
* The text "comments" and "queries" was hardcoded in ajax-updatedb-getinfo.pl script. It has been replaced by a JSON call, returning 2 separate values, "comments:" and "queries:" is now in the template, making it translatable
* Some minor tweak in the display (like putting things in bold, displaying OK in green, warnings in yellow and KO in red)
* Reordering the column headers for more readability:
* Status column is merged with availability, column is after status
* Status/availability terms more clear: "Not applied" instead of "unknown", "Applied and OK", "Applied and failed", "Applied and forced" are the 3 other statuses
* Removed one click to display comments on DBREv not yet applied: before the patch, one had to click "Show details", then "Get comments", now, "Get comments" is enough
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Chris Nighswonger <cnighswonger@foundations.edu>
Bug 7167: FIX typos & moving a script to a proper place
* renamed availables to available
* renamed already_knows to already_applied
* fixed FSF & copyright headers
* removing a "use strict" because we already had use Modern::Perl
* fixed a tiny typo in about.tt
* moving update.pl to misc/bin because it's a CLI script
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Chris Nighswonger <cnighswonger@foundations.edu>
Bug 7167: Add dependency File::Find::Rule
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Chris Nighswonger <cnighswonger@foundations.edu>
Bug 7167: We want to execute non-numeric version with the -all option
Dealing with Marcel comment 100:
> Note that the current code around line 52/53 does not
> handle that correctly:
> Argument "\x{74}\x{65}..." isn't numeric in numeric ge (>=) at
> installer/data/mysql/update.pl line 52.
Now, a non-numeric DBRev will be applied if you provide the --all parameter, without throwing the error
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Chris Nighswonger <cnighswonger@foundations.edu>
Bug 7167 reindentation & removing dead code
* The if (! defined $ENV{PERL5LIB}... block was wrongly intented
* The 3 lines running update.pl are useless: the update (new mechanism) is run from admin/updatedatabase.pl script. This part of install.pl is run only when you have "old style" DB revisions.
Summary:
* old mechanism = it's run as previously, by reaching the installer/install.pl?step=3 page, that applies all revisions
* new mechanism = when you log-in or reach mainpage.pl, you reach admin/updatedatabase.pl, where you can see what will be run, and run it
Tiny side effect = the check for old mechanism is now done *after* authentification (thus it's not done on each page call). It means that the user will have to enter login/password twice :
* first to log-in to Koha
* second to run installer/updatedatabase.pl?step=3
As the old mechanism is deprecated, we can expect this will happend only a few time in the history of a setup, it's not a big deal.
Signed-off-by: Chris Nighswonger <cnighswonger@foundations.edu>
Bug 7167: Don't raise an error in routine TableExists
Signed-off-by: Chris Nighswonger <cnighswonger@foundations.edu>
Bug 7167: FIX merge
Signed-off-by: Chris Nighswonger <cnighswonger@foundations.edu>
Bug 7167: Add .pl and .sql examples
Those files are in version directory, so will never be executed by the updater
If you want to provide an update, do it in a 3.09/ directory (if your update is expected for 3.10 version)
Note that the updater use a md5sum checker. So, if the same update is in 2 different places, it will be detected. That will be handy for changes made on both stable and master: a library running stable will get the update when updating. When upgrading to the next major release, Koha will detect the patch has already been applied, and no error will be thrown. With the previous mechanism, a DBRev ported to stable was re-executed when upgrading to master, resulting in a nasty (but usually harmless) error message
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Chris Nighswonger <cnighswonger@foundations.edu>
Bug 7167 follow-up fix POD syntax to please koha-qa.pl
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
In order to detect the apache version, there are multiple
commands used. These may not all exist, which triggers error log
entries. By simply adding " 2> /dev/null", the errors are no
longer generated.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Add warning to 'About->System information' if an user is logged in as
database admiinsitrative user (root user).
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
To minimize support questions regarding common mistakes, the About
page should have an additional tab that displays warnings if depractated
and/or mutual excluding system preferences are used.
To test patch use values as displayed on screenshot attached.
New: Shows error message in Tab Server Information if Zebra server is not started
(...and changes added...)
Suggestions for other values to add are welcome.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Fixes few tabs within date; adds a regex to fix mistakes with spaces.
Signed-off-by: Marc Veron <veron@veron.ch>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Last modules were not displayed if the number of modules did not match the number of rows of the table (when $number_of_modules % 4 != 0)
Signed-off-by: Marc Veron <veron@veron.ch>
Added some code to about.tt to have empty the last remaining cells, not sure if an other signoff is needed.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
* in history.txt, added a tab for Stephane Delaune, for display consistency
* fixed a small mistake in about.pl that was resulted in a perlcritic failure
Includes follow up by Chris Cormack fixing formatting in docs/history.txt
[MINOR EDIT] Added html filter to output for validity's sake
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
This patch solves the situation that news is in another language than
the Koha interface AND makes that themelanguage routine is always called
the same way in order to prevent mixed display.
It fixes also a bug related to language preselection based on web
browser prefered language.
September 9: Adjusted with input of Frederic Demians.
Septembre 10: Avoid circular dependency, as pointed by Chris Cormack.
Templates related functions are moved from C4::Output to C4::Templates
Signed-off-by: Alex Arnaud <alex.arnaud@biblibre.com>
Signed-off-by: Ian Walls <ian.walls@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
This patch adds a dependency requirement for Locale::Currency::Format
NOTE: It does not adjust kohaversion.pl and sets the dev version to XXX.
Signed-off-by: Galen Charlton <gmcharlt@gmail.com>
This enhances the web installer so that messages from updatedatabase.pl will
be displayed to the user running a database update. Messages printed to STDOUT
will be displayed as the update report, while messages printed to STDERR will
be displayed as update errors.
This patch introduces a new module dependency, IPC::Cmd.
IPC::Cmd lets one run an external program such as updatedatabase.pl and easily
capture STDERR and STDOUT for further munging. IPC::Cmd is core in Perl 5.10
and stable in Perl 5.8.
Signed-off-by: Galen Charlton <gmcharlt@gmail.com>
The Offline Circ tool by Kyle Hall uses PHP's SQLite, which is SQLite
v2. Gnope, which Kyle links, ships with libSQLite v2.
Let's not count on libsqlite3 not being installed for perl. If it is
installed DBD::SQLite will use it, where DBD::SQLite2 will not.
Signed-off-by: Galen Charlton <galen.charlton@liblime.com>
Most Perl scripts (as opposed to modules) do
not need to require Exporter.
No user-visible or documentation changes.
Signed-off-by: Galen Charlton <galen.charlton@liblime.com>
Corrects the Tidy errors:
line 428 column 19 - Error: "tr" not finished but containing element ended
line 428 column 19 - Error: end tag for "tr" omitted, but OMITTAG NO was specified
line 426 column 25 - Info: start tag was here
line 452 column 31 - Error: end tag for "strong" omitted, but OMITTAG NO was specified
line 452 column 12 - Info: start tag was here
line 518 column 17 - Error: document type does not allow element "ul" here; missing one of "object", "applet", "map", "iframe", "button", "ins", "del" start-tag
line 525 column 17 - Error: document type does not allow element "ul" here; missing one of "object", "applet", "map", "iframe", "button", "ins", "del" start-tag
Signed-off-by: Galen Charlton <galen.charlton@liblime.com>
This patch removes Image::Magick as a dependency and replaces it with
the (much) lighter GD. Functionality of patronimage code has not changed with
this conversion.
Adding errorhandling for corrupted image file and link to return to moremember.pl when called from there
Added notes about supported image mime types.
Signed-off-by: Galen Charlton <galen.charlton@liblime.com>
Signed-off-by: Joshua Ferraro <jmf@liblime.com>
formerly, the overdues cronjobs were crafting their own MIME message attachments (poorly). This
patch adds a dependency on MIME::Lite, the de facto standard perl module for forming usable
emails with MIME attachments. MIME::Lite is pure perl and well supported on numerous platforms:
http://testers.cpan.org/show/MIME-Lite.html
Signed-off-by: Joshua Ferraro <jmf@liblime.com>
SMS::Send is used by the new enhanced messaging stuff. It's a pure-perl module that
provides a consistent interface to SMS sending gateways. There are alredy
a handful of driver modules for gateways on CPAN, and adding one for a new gateway
is possible.
Signed-off-by: Joshua Ferraro <jmf@liblime.com>
When using mysql and a sufficiently recent version
of DBD::mysql that actually respects the mysql_enable_utf8
option, setting the current branch to a name that
includes a diacritic causes the session to fail
and forces the user to the login screen upon
clicking another link.
This turned out to be due to the default (Data::Dumper)
serialization used by CGI::Session, which truncated the
session object at the diacritic. By enabling
that module's YAML serialization option, the problem
was resolved.
This patch introduces a dependency on the YAML::Syck
module.
Signed-off-by: Chris Cormack <crc@liblime.com>
Signed-off-by: Joshua Ferraro <jmf@liblime.com>