Since C4::Context->dbh shares the DB handler, it's useless to pass it to
routines.
Test plan:
Try to remove an item from the Koha interface.
Verify that unit tests pass.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch fixes some potential SQL syntax errors, which can cause
fatal software errors in Koha when the environmental variable DEBUG
is on.
_TEST PLAN_
Before applying:
0) Ensure that you don't have "SetEnv DEBUG 1" in your Apache config
1) Create a new bib record
2) Click on the "Holds" tab before creating any items
3) Note the message "Cannot place hold: this record has no
items attached."
4) Add "SetEnv DEBUG 1" to your Apache config
5) Restart Apache
6) Refresh your page
7) Note the following Software Error: "DBD::mysql::st execute failed:
You have an error in your SQL syntax; check the manual that
corresponds to your MariaDB server version for the right syntax to
use near ')' at line 3 at /koha/lib/C4/Koha.pm line 835.
8) Apply the patch
9) Refresh your page
10) Note the message from Step 3
Thorough tester:
11) Remove "SetEnv DEBUG 1" from your Apache config, restart Apache,
and refresh your page. You should see the message from Step 3.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Error reproduced, patch fixes it.
Tested following test plan, no koha-qa errors.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The changes made by Bug 7720 ("Ambiguity in OPAC Details location")
broke the display of OPAC branch information tooltips by making changes
to the markup which the tooltip plugin needs to function.
This patch corrects the markup to enable tooltips to work again. This
patch also makes changes to Items.pm so that branch information tooltips
can be shown for both home and holding branches (which are optionally
displayed now via the changes by Bug 7720). Before this patch the
tooltip would always display the information for the holding branch
regardless of the OpacLocationBranchToDisplay setting.
This patch also changes the footer include, adding an alias for the
jQueryUI tooltip function to prevent conflict with Bootstrap's function
of the same name.
To test, you must have at least two libraries configured with "OPAC
info" for display in the OPAC.
Modify the holdings of a title so that there is at least one item which
has different holding and home branches matching your library configured
above.
View the detail page for that record under various values of the
OpacLocationBranchToDisplay system preference:
- "holding library" : The table of holdings should show a column for
only the holding library. Hovering your cursor over the library name
should display the branch information you configured for that library
in a tooltip .
- "home and holding library" : The table of holdings should show columns
for both home and holding library. Hovering your cursor over each
should show the corresponding library information tooltips.
- "home library" : The table of holdings should show a column for
only the home library. Hovering your cursor over the library name
should display the branch information you configured for that library
in a tooltip.
Signed-off-by: Christopher Brannon <cbrannon@cdalibrary.org>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes QA script and tests.
Works with all settings of OpacLocationBranchToDisplay.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The QA follow-up which adds GetURL to the TT branches
plugin means that GetItemsInfo no longer needs to be changed.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
[1] Fix capitalization
[2] Move logic for getting the home library name URL to the
Branches TT plugin
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Currently, in opac-detail.pl, there exists a column named 'Location'.
This column lists the name of the holding branch, and the item's
location description. This can cause confusion to borrowers, as
they may assume that the holding branch is the *owning* branch
(homebranch) of an item.
This could cause a situation where a borrower waits for an
item to be returned to his or her library, only to find that
the library never owned that item, and it was transferred back
to its homebranch. It could also lead a borrower to falsely
assume that his or her home library does not own a copy of a
particular item because the borrower does not see an his or her
home library listed for any of the items on the record.
In addition, even when the holding branch is different
than the home branch, the item's shelving location is displayed,
even though that branch may not use that location.
This commit makes the item details table equivalent to the intranet
details page by adding a "Home Library" column, which displays the
item's home library, as well as the shelving location.
If singleBranchMode is enabled, this column disappears and the
"Location" column displays the shelving location only.
This commit adds two new system preferences:
OpacLocationBranchToDisplay, which defines whether
to display the holding library, the home library,
or both for the opac details page.
OpacLocationBranchToDisplayShelving, which defines
where the shelving location should be displayed,
under the home library, the holding library, or both.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Comment: Work as described. Tested all variations.
No koha-qa errors.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
In serials/serials-edit.pl, if an item field is hidden from the OPAC,
it will not display in the editor, even if the field is marked as
visible in the staff intranet and editor. However, the field is still
displayed correctly in the items editor ( additem.pl ).:
Test Plan:
1) Select an item-level field ( e.g. non-public note )
2) Create a serial using the default framework ( or one of your choice )
3) For that framework, mark the chosen field as visible from the
intranet and editor, but not the opac.
4) Receive an item for this serial, note your field does not display
5) Use the biblio item editor to add an item ( additem.pl ), not the
field displayes
6) Apply this patch
7) Repeat step 4, not the field displayes
Signed-off-by: Kim Schwant <kim.schwant@courts.in.gov>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
PrepareItemrecordDisplay is only used for editor (-4 < hidden < 4)
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This is just some code cleanup, no behavior change expected.
Also replacing errstr with err in testing the results. (See DBI.)
Test plan:
Modify an item and save it.
Followed test plan. No problems found.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch adds the words 'biblio' and 'item' to the 'info'
of the cataloguing logs which were missing them (such as biblio
delete, biblio mod, item mod, upload cover image).
This patch also adds 'authority' for authority mod.
_TEST PLAN_
Before applying:
1) Create/view mods for items, biblios, and authorities.
2) Create/view biblio deletion
3) Create/view upload cover image log
4) Note that none of these contain the words 'biblio','item',or
'authority' in their "Info" columns.
Apply patch.
5) Repeat steps 1-3
6) Note that the new logs contain 'biblio','item', and 'authority'
in their "Info" column, while the past ones don't.
7) Note also that 'biblio' and 'item' will have 'Biblio' and 'Item'
appear in their "Object" column for the new logs
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
The method of checking the logged in user for superlibrarian privileges
is obtuse ( $userenv && $userenv->{flags} % 2 != 1 ) to say the least.
The codebase is littered with these lines, with no explanation given. It
would be much better if we had one subroutine that returned a boolean
value to tell us if the logged in user is a superlibrarian or not.
Test Plan:
1) Apply this patch
2) Verify superlibrarian behavior remains unchanged
Signed-off-by: Joel Sasse <jsasse@plumcreeklibrary.net>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Comments on second patch.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
In C4::Items::DelItemCheck, there are two SQL queries: one to check
if item is on loan, the other if item is reserved.
Those two queries use "SELECT * FROM table", fetch the data with
"$var = $sth->fetchrow", and use "$var" as a boolean condition.
This is not correct, SQL query should be "SELECT COUNT(*) FROM table".
As a consequence, it was possible to delete an item without warning to
the operator even if it was waiting on the hold shelf or in transit to
fill a hold.
This patch corrects the SQL queries and sets my ($var) to show that
fetchrow returns an array.
Test plan :
- Set an item A onloan
- Set an item B reserved and the reserve waiting
- Go to items cataloguing : cgi-bin/koha/cataloguing/additem.pl?biblionumber=XXX
- Try to delete item A
=> You get an alert and item is not deleted
- Try to delete item B
=> You get an alert and item is not deleted
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Works, and has the added bonus of being a tiny bit faster.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes t, xt and QA script tests.
Also tried deleting via batch delete - correct warnings are displayed.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
When item is transfered from items table to deleted items, all fields
must be copies but "timestamp".
This value must be updated to know when the item was deleted.
Test plan:
- Look a an item timestamp :
mysql> select timestamp from items where itemnumber = 2690;
+---------------------+
| timestamp |
+---------------------+
| 2011-09-09 15:30:21 |
+---------------------+
1 row in set (0.00 sec)
- Delete this item in cataloguing module
- Check it is not in items table anymore :
mysql> select timestamp from items where itemnumber = 2690;
Empty set (0.00 sec)
- Look in deleteditems table :
mysql> select timestamp from deleteditems where itemnumber = 2690;
+---------------------+
| timestamp |
+---------------------+
| 2013-12-05 15:33:20 |
+---------------------+
1 row in set (0.00 sec)
=> timestamp as been set to actual date/time
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Patch set passes koha-qa.pl, works as advertised!
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This is supplementary to the main patch for
bug 6331. Having removed the attribute marc from
items DelItem, we should not try to populate it.
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Add date fields to track when an item was marked as lost or withdrawn.
Display those fields on catalogue/moredetail.pl
Test Plan:
1) Apply patch
2) Run updatedatabase.pl
3) Pick a record with items, browse to the 'items' tab ( moredetail.pl )
4) Mark an item as lost, verify the field "Lost on:" displays below
the "Lost status" field with todays date.
5) Mark the item as not lost, verify the field no longer displays
6) Repeat steps 4 and 5 with the Withdrawn field.
Signed-off-by: Mathieu Saby <mathieu.saby@univ-rennes2.fr>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Mandatory item fields are not indicated the same way in all places. This
patch corrects two places where required fields were shown in bold
rather than using the standard "required" class: When adding an order
from a staged file and when adding an item for a new issue of a serial.
This patch also normalizes the text input size on item entry forms: In
some places it was 50, others 67. I have changed the latter to 50.
Unrelated changes: Added $KohaDates formatting of date and time and
corrected capitalization on a heading on the add order from staged file
page.
It would be nice to be able to use the same method for displaying the
item form as we use on neworderentry.tt -- pulling in the form from a
separate include. However that system is designed for handling multiple
items and would need to be adapted for these cases.
To test, you must have a staged file from which to add an order. Open an
existing basket or create a new one and choose to add an order "From a
staged file." Choose a staged file from which to order. The item entry
form under the "Import all" heading should show required fields in red.
To test in serials: Begin the process for receiving an item from an
existing subscription. On the serials-edit page, find the "Click to add
item" links and click to open the item edit forms. There should be one
under the numbered issue and the supplemental issue forms. In both cases
the item edit screen should show the mandatory item fields in red.
Confirm that the cataloging add item form looks correct and works
correctly.
Revision: Left out the "required" note which should appear after each
required field.
Signed-off-by: David Cook <dcook@prosentient.com.au>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
The clear js function parses input text, but input filled to a plugin
does not contain the type attribute.
Test plan:
- fill the barcode field to the barcode plugin
- go on the new order page
- verify the barcode plugin works as before
- verify the clear link clears the barcode field and all others fields.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as expected, passes all tests and QA script.
Template change only.
Barcode and date acquired are now also cleared with the
'clear' link.
But: it only works when you enter a barcode manually currently,
because the AutoBarcode functionality is broken on master (bug 11273).
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This followup fixes some QA issues:
- replace the MySQLism SQL_CALC_FOUND_ROWS
- use Koha::DateUtils instead of C4::Dates
- replace "branch" and "location" with "library"
- fixe wrong capitalisation on "Clear all" and "Select all"
and fixes some behaviors:
- the inventory tools can be used without barcode file (fixed for the
csv export too).
- mark as not scanned a non scanned item.
- update the datelastseen 1 time per biblio (and fixes the displayed
count)
Signed-off-by: Mathieu Saby <mathieu.saby@univ-rennes2.fr>
Signed-off-by: Koha Team Amu <koha.aixmarseille@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
* when a file was uploaded and the comparison with catalogue range
requested, the comparison was wrong: the logic was wrong
* items that were not supposed to be scanned (ie: supposed to be on another shelf)
didn't had the author and title, it was hard to retrieve them on the shelved
* some useful fields were missing, like homebranch, location, status
* the CSV export contained all the item information. It should contain the same
informations as the screen
Behaviour now:
* scan a list of barcode & select a range of location
* if a barcode has been scanned and should not be (misplaced item),
the information is displayed
* if you choose "compare barcodes list to result option", the
resulting list contains all items that have been scanned and those
that were supposed to be. Any item not in both list appears with a
specific message on the last column
Signed-off-by: Leila <koha.aixmarseille@gmail.com>
Signed-off-by: Koha Team Amu <koha.aixmarseille@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
A lot of tests were just a call to a funtion without any arguments,
whereas the function expect at least one argument.
These tests were kept, but all return values are now undef when a
mandatory argument is missing, so return values are consistent.
The part where subscription periodicity is changed could not work
because of ',' appended to each key in ModSubscription call. So it's
rewritten, taking into account the new API for subscription frequencies.
This script should leave your database intact because it revert any
modification made.
Also fix some warnings in C4::Serials and in C4::Items.
And fix a typo in koha-tmpl/.../subscription-numberpatterns.tt
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Comment: Work as described. No errors
Tested, again, without trouble.
With a suscription, tests successful.
No koha-qa errors
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch adds a renewal tool that functions similar to the returns where a
librarian can continuously scan items for renewal. This script blocks
renewals that are impossible, and allow the same renewal overrides
as circulation.pl
Test plan:
1) Apply the patches for bug 8798
2) Apply this patch
3) Browse to /cgi-bin/koha/circ/renew.pl
4) Enter an invalid barcode, you should get an error message
5) Enter a valid, but not checked out barcode, you should get an error
message.
6) Enter a valid barcode that is checkout out and should be renewable,
you should get a success message.
7) Enable AllowRenewalLimitOverride
8) Enter a barcode for an item that has been renewed too many times
9) You should get a warning which you can override.
10) Disable AllowRenewalLimitOverride
11) Repeat steap 8
12) You should get a blocking error message
11) Enter a barcode for an item with unfilled holds on it,
you should get an overridable warning
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Passes all tests and QA script, some issues have been
addressed in follow-ups.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch adds several unit tests for GetHiddenItemnumbers and fixes the POD for it.
It also wraps the tests for rollback, modernizes and adds a license text to it.
Sponsored-by: Universidad Nacional de Cordoba
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
There should be a:
"require YAML;"
or
"use YAML qw/Load/;"
as the GetHiddenItems routine has a reference to YAML::Load.
This was discovered while adding a GetHiddenItems() call into
opac/opac-MARCdetail.pl. I believe this problem dates back to
bug 6488 or bug 5984.
I also added an optimization to GetHiddenItems to prevent
processing if there is nothing in the system preference. Test
by searching for a biblio which has some or all of its items
hidden.
Signed-off-by: Mason James <mtj@kohaaloha.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Maybe
return () unless $yaml =~ /\S/;
or
return () if $yaml =~ /^\s*$/;
would have been easier to read.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch updates the wthdrawn field in items and deleteditems to be
withdrawn instead. No functional changes are made.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Comment: Save for translation files (that will be fixed on next release),
only occurrence of wthdrawn is on updatedatabase.pl
No koha-qa errors.
This touch many files, and I did not test everything,
but all seems normal. I think that any problem could
be fixed later.
Perhaps both entries in updatedatabase.pl could be joined
into one, but thats for QA.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch updates the example template syntax in the POD for
C4::Items::GetItemStatus() to use Template Toolkit syntax.
To test, view the POD for C4::Items::GetItemStatus() and confirm that it
looks correct.
Signed-off-by: Magnus Enger <magnus@enger.priv.no>
This patch works as advertised (verified with "perldoc C4::Items"),
for GetItemStatus, but it does not fix a a similar example for
GetItemLocation in the same file, which still has the old template
syntax. So a followup or separate bug for that is called for.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
It seems the default option is not in used in templates.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Test Plan:
1) Enable IndependantBranches
2) Apply this patch
3) Run updatedatabase.pl
4) Verify that the system preference still functions correctly
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Simply revert order of 2 lines in Items.pm. Previous line write to
variable used in next line as function argument.
To Test:
Give an item a special restricted value, define one if you have to
in the authorised values.
Observe that, without this patch, statuses are not shown in the
OPAC in parentheses. My example was an item that had a restricted
value of "Library Staff Only"
It should have been shown under status on the detail page of the
OPAC, but was not.
Apply the patch, observe that restricted values are now shown
for your item, for example:
Available (Library Staff Only) in the status column.
Signed-off-by: Liz Rea <liz@catalyst.net.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and test plan.
Simple change fixing a display problem, no string changes.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Test Plan:
1) Enable IndependantBranches
2) Set HomeOrHoldingBranch to holding branch
3) Delete an item whose holding branch is your logged in branch, and
whose home branch is not
4) Apply this patch
5) Repeat step 3, it should fail
6) Try to delete another items whose home branch is your logged in
branch, and whose holding branch is a different branch. This
deletetion should succeed.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
All tests and QA script pass.
Change is logical, only homebranch should determine if the item
can be deleted.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
The SQL query build in C4::Items::_koha_modify_item performs an update on a row of items table identified by itemnumber.
Actually the query is build using a hash of datas :
for my $key ( keys %$item ) {
$query.="$key=?,";
push @bind, $item->{$key};
}
But this hash contains 'itemnumber' key, so you get an update including the primary key.
It is actually harmless but may be dangerous.
This patch simply skips itemnumber key in above loop.
Test plan :
Check you can create and modify items.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Bug 9902 introduced an issue in the C4::Items::PrepareItemrecordDisplay
routine. The existence of $defaulvalue hashref should be tested before
getting to the branchcode key.
Test plan:
Before applying the patch, an error occurred when you try to create an
order from a staged file.
After applying the patch, the error does not appear anymore.
Signed-off-by: Mathieu Saby <mathieu.saby@univ-rennes2.fr>
Signed-off-by: Mason James <mtj@kohaaloha.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Test Plan:
1) Create a new serial with a default location, call number, and library
( the library will need to be any but the one you are logged in as )
2) Click the "Recieve" button for this serial
3) Click "Click to add item"
4) Note those values are not populated
5) Apply the patch
6) Reload the page
7) Click "Click to add item"
8) Note those values are now populated
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
All tests pass!
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
This seems to restore the former behaviour.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
All tests and QA script pass.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Removed NoZebra vestiges. This comprises several code blocks that depend on the NoZebra syspref and NZ related functions/methods.
C4::Biblio->
GetNoZebraIndexes
_DelBiblioNoZebra
_AddBiblioNoZebra
C4::Search->
NZgetRecords
NZanalyse
NZoperatorAND
NZoperatorOR
NZoperatorNOT
NZorder
C4::Installer->
set_indexing_engine
Sponsored-by: Universidad Nacional de Córdoba
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Some variables are useless in C4::Items::PrepareItemrecordDisplay.
This patch removes its.
Test plan:
Syspref AcqCreateItem = "receive an order" and try to receive an order.
Check there is no regression.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
The homebranch and holdingbranch ddl in item block are not default selected.
I just put the default choice as the login branch.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Before the patch, orderreceive.pl showed the branches alphabetically.
After the patch, it automatically selects the branch I'm logged in to.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
In a librairies network, we would like to declare specific values just
for one (or more) library.
Here we implement the ability to associate categories, patron attributes
types and/or authorised_values with librairies (branches).
This patch adds 3 new association tables:
- categories_branches ( association table between categories and branches )
- authorised_values_branches ( association table between
authorised_values and branches )
- borrower_attribute_types_branches (association table between
borrower_attribute_types and branches )
Plan test:
- Create (or modify) categories, patron attributes and
authorised_values and link it with one (or more) library.
- Set one of these librairies
- Go to one of the multiple pages where this specific value must be displayed
and check that it does appear.
- Set a library not concerned.
- Check on the same pages this value is doest not appear.
A page list:
cataloguing/addbiblio.pl
cataloguing/additems.pl
members/members-home.pl
members/memberentry.pl
acqui/neworderempty.pl
tools/modborrowers.pl
and others :)
Please say me if filters don't work on some pages.
Signed-off-by: Delaye Stephane <stephane.delaye@biblibre.com>
Signed-off-by: Koha Team Lyon 3 <koha@univ-lyon3.fr>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Melia Meggs <melia@bywatersolutions.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Passed-QA-by: Marcel de Rooy <M.de.Rooy@rijksmuseum.nl>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
"return" statement with explicit "undef" at line 508, column 44. See page 199 of PBP. (Severity: 5)
"return" statement with explicit "undef" at line 2267, column 5. See page 199 of PBP. (Severity: 5)
Variable declared in conditional statement at line 2642, column 21. Declare variables outside of the condition. (Severity: 5)
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
If the ReturnToShelvingCart syspref is on, and something needs to go in transit,
the shelving cart setting is overriding the transit.
What seems to be happening is this:
* Item is checked in, and flagged as needing to go in transit from A to B.
* Item is immediately flagged as shelving cart, though. Current display says both shelving cart and in transit.
* After the cart-to-shelf script runs, item comes out of transit and
shows as being available at the destination library, although it hasn't
arrived yet and no one has manually checked it in.
http://bugs.koha-community.org/show_bug.cgi?id=3701
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
This simplifies code, and has nice side-effect that memoize of
C4::Koha functions will be more effective.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Due to a dependency cycle between C4::Search and C4::Items, searches
in the OPAC die spectacularly under Plack. This counter-patch extends
dpavlin's solution and replaces use with require for C4::Search in
C4::Items and for C4::Items in C4::Search.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Based on patch submitted by Ian Walls
Items were sorted by branch, then date accessioned, in GetItemsInfo. While this can be
helpful in some circumstances, more often it is useful for items to be sorted first by
their enumchron (volume/issue, if applicable) then by their copy number. This patch changes the
sort on GetItemsInfo to branch, enumcrhon, copynumber then date accessioned.
As sorting on copynumber will be incorrect based on standard sorting ( e.g. 1, 10, 2, 20 ),
the copynumber is now padded with leading zeros to correct the sorting ( e.g. 01, 02, 10 20 ).
This function appears to be a standard SQL function and not a mysql-ism. I have verfified
that is available in MySQL, Postgres, and Oracle.
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Passed t xt
Item sorts appear to be correct to me based on the rubric of branch, enumchron, copynumber, then date accessioned.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Move SQL code from Perl script to Perl module
Replace SHOW COLUMNS by $dbh->column_info()
Update total on neworderempty.pl when adding or deleting items
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Tested ok for ordering and receiving items.
Total updated correctly.
Note: There are lots of errors in the logs before and after applying
the patch. A follow up is needed.
Adding back "use C4::Search;" in Items.pm fixes the problem.
I think this is probably related to the denesting efforts.
Signed-off-by: Ian Walls <koha.sekjal@gmail.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
New function was actually returning an arrayref, so made
perldoc and function usage consistent.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Adds a new subroutine in C4::Items, GetItemnumbersForBiblio, which takes a
single biblionumber, and returns an array of all the corresponding itemnumbers.
This patch also replaces the usage of get_itemnumbers_of in C4::Reserves::CanBookBeReserved
with this new subroutine, as the output is more consistent with what we were
lookng for (this is what fixes the bug issue).
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This bug was uncovered by @mglavica during HackFest in Marseille
It also showed it's ugly head during my plack presentation there.
Following chang removes circural dependecy introduced by commit
b65efdaacaf77fb53fee479da7f2e990ba0adeed which is part of Bug 6027
Signed-off-by: Alex Arnaud <alex.arnaud@biblibre.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
This adds the -dedupbarcode option that allows bulkmarkimport to erase
a barcode but keep the item of any items it finds with duplicate
barcodes.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
In current version of code, it gets initialized too late, so it produces
unitialized warnings for hidden fields (which is non-fatal) and breaks
generated JavaScript for AJAX value_builders (which is fatal)
This bug was introduced in ticket 6106 which is modification of 5955
which didn't have this particular problem.
Since then, this code moved to C4::Items because of de-nesting patches.
Test scenario:
1. define 952$i plugin: stocknumberam123.pl (this is ajax value_builder)
2. go to one of following pages and verify that plugin works:
acqui/addorderiso2709.pl
acqui/neworderempty.pl
acqui/orderreceive.pl
serials/serials-edit.pl
For stocknumberam123.pl plugin to work, you have to have at least
one item with stocknumber in format which this plugin expects:
capital letters, space, some number
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works nicely, thanks for the great test plan.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Optionally delete bibliographic record when batch deleting items, if no items remain on the record.
Adds deleting of reserves to DelBiblio. Since subscriptions are deleted automatically,
it made sense for deletion of reserves to maintain the same behavior.
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
I like the way this works, and it does. Passes tests.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Removing 'use C4::Branch' in favour of a subroutine-specific 'require C4::Branch'
causes the GetBranchName subroutine to return an error, as it's not defined
in C4::Items. Adding "C4::Branch::" scoping fixes the error, which is what's done here.
To confirm problem:
1. Attempt to run bulkmarcimport.pl before applying the patch. You should get
ERROR: Adding items to bib 435 failed: Undefined subroutine &C4::Items::GetBranchName
called at /home/sekjal/kohaclone/C4/Items.pm line 656, <GEN13> line 435.
To test:
2. apply patch
3. run bulkmarcimport again. Error should disappear.
Signed-off-by: Ian Walls <koha.sekjal@gmail.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Note that this problem only appears when importing records with item (952)
fields.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
the sub _find_value is used only in PrepareItemRecord sub, that has been moved to Items package
This patch moves the _find_value in Items as well.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Editing an already arrived serial issue with an attached item
resulted in an error. After applying the patch it's fixed.
C4::Branch is used only in CheckItemPresave, moving from a use to a require in the sub
C4::Reserve:
This package is loaded just for C4::Reserves::CheckReserves called in C4::Items::GetItemsInfo
The GetItemsInfo stores the result of CheckReserves in a hash entry, count_reserve, that is used only in opac_detail to display the status of a hold. We could remove the reserve_count hash entry and inline C4::Reserves::CheckReserves directly from opac-detail.pl page
in opac-detail.pl, instead of
if( $itm->{'count_reserves'} eq "Waiting"){ $itm->{'waiting'} = 1; }
write :
if ( C4::Reserves::CheckReserves(<<parameters>>) eq "Waiting"){ $itm->{'waiting'} = 1; }
C4::Acquisition is used only in MoveItemFromBiblio, a sub that is rarely called. Moving from a use to a require in the sub
C4::Charset is used only in _parse_unlinked_item_subfields_from_xml. Moving from a use to require in the sub
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Checked opac-detail and cataloging. Code looks good.
C4::Biblio is used in many many places. The goal of this cleaning is to do from C4::Biblio a package with as many dependancies as possible.
* C4::Heading is called only in 1 place, highly rarely used (only in 1 misc/link_bibs_to_authorities.pl), moving to require
* PrepareItemrecordDisplay is a sub that is more related to Items, moving it here. It means some scripts that used this sub must be checked against use C4::Items
* C4::Items is needed in EmbedItemsInMarcBiblio, moving it only in this sub, and switching to require
* 2 subs are totally useless z3950_extended_services and set_service_options, removing them
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
No test plan included, but tested some opac and cataloging functions.
Code looks good. Marked as Passed QA.
Changed searchResults() interface
Added trailing \n when parsing OpacHiddenItems to make YAML happy
XSLTParse4Display() and buildKohaItemsNamespace() take hidden
items as input param
Removed numbering from the search results, looks wrong with
hidden items
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
Tested by recieving multiple items with the AcqCreateItem
preference set to 'placing and order' and 'receiving an item'
In both cases the pricing and vendor is brought over to the
item record so I'm signing off.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Not sure the brackets are nessecary, but I think I remember learning
bitwise operators have a lower priority than other relational
operators so wanted to make sure we notted the result of the bitwise
and, not the flag
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
To test:
Create 4 holds on a bib, for patrons A, B, C, and D,
Check in the item to mark hold as waiting for patron A
Check out the item to patron B -> reserve for patron B should be removed
Check in the item to mark hold as waiting for patron A
Check out the item to Patron A, hold should complete normally
Check in the item to mark hold as waiting for patron C
Check out the item to patron D -> reserve for patron D should be removed.
Check in the item to mark hold as waiting for patron C
Check out the item to patron C, hold should complete normally
Check in the item -> there should be no more reserves.
We also tested:
Created 4 holds on a bib with two items, for patrons A, B, C, and D
All worked as expected.
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
This patch doesn't fix the origial request to add the renewal date
to the list of checked out items, but follows the other bug commenter's
suggestion that the information be added to the item details page
(moredetail.pl).
The other part of this request, to add the checkout date, has already
been fixed by another patch.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Currently, when you delete an item, the timestamp column in deleteditems is
updated with current time. (This comes from an [unintentional] additional
update statement in DelItem.) It makes deletion time visible.
In the past, the marcxml was updated too at that moment, resulting in an
updated timestamp in biblioitems too. The timestamp in biblio was not touched.
If you delete a biblio however, the timestamps in deletedbiblio and
deletedbiblioitems do not reflect time of deletion. They still show the time of
last update before the record was deleted. This last update can be extracted
from MARC field 005 too.
This behavior is not consistent nor logical. I would suggest to add a statement
in DelBiblio to force updating the timestamp in deletedbiblio(items) too. It
makes the time of deletion visible in the record too. The time of deletion of a
biblio can be very useful for e.g. synchronizing purposes.
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
If the AcqCreateItem preference is set to "ordering" and the barcode for
the new item is already in use, no error is returned, but an invalid
itemnumber is saved in the aqorders_items table and the item is never
created.
This patch adds a duplicate barcode verification in neworderempty.pl
_koha_add_item is also modified so it won't return an invalid ID when
an item can't be added.
http://bugs.koha-community.org/show_bug.cgi?id=6963
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Test plan on second patch.
- all items attached to the order are deleted
- if there is no more items, and if the biblio is not in other orders and no subscriptions and no holds then the biblio is proposed to deletion
Now whe have 2 links : "delete order" and "delete order and catalog record", the second one appears only if the deletion is possible.
Note that if an hold is related to the item or if the item is unique for the biblio the link "Delete order" is canceled due to hold remaining.
On mouse over explanations are shown with count.
More lines of warnings with count are shown depending of the case.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Configuration:
AcqCreateItem = on order
Test cases and results:
1) Order new record with 2 items
a) From basket
- delete order: only deletes items, OK!
- delete order and catalog record: deletes record and items, OK
b) From shipment/receive
- delete order: only deletes items, OK!
2) Order 1 additional item for existing record with 1 item
a) From basket:
- delete order: works, existing item and record remain, OK
- Can't delete order and catalog record, 1 item left, OK!
3) Order new record with 1 item, title level hold on record
a) From basket:
- delete order: not possible, OK!
- delete orer and catalog record: not possible, OK!
b) From shipment/receive page
- Cancel: Deletes order, record and hold silently.
NO WARNING. NOT OK. See note below.
4) Order 1 additional item for existing record with 1 item,
item level hold on existing item
a) From basket:
- delete order: works, hold and existing item remain, OK!
- delete order and catalog record: not possible, OK!
b) From shipment/receive page
- Cancel: on order item is deleted, other item and hold remain.
5) Order new serial record, create subscription
a) From basket:
- delete order: works, record and subscription remain, OK!
- delete order and catalog record: not possible, OK!
b) From shipment/receive page:
- Cancel: Subscription and record are silently deleted. NOT OK.
6) Order additional item for existing record with other on order items
a) From basket:
- delete order: works, existing on order items remain, OK!
- delete order and catalog record: not possible, OK!
b) From shipment:
- Cancel: deletes order and ordered item. OK.
Changes made:
I changed the wording of the error messages a bit in the template.
I changed the message 'Can't delete order and catalog record' to not be
shown as a link, as the link does nothing. Tooltip still appears.
I attached a screenshot to the bug showing some of my changes.
Hope that's ok.
Necessary enhancements:
Cancelling orders when receiving items should work the same as from the
basket summary page. We need the same checks and messages there before
deleting records and items automatically.
I am signing off on this, but to go into Koha it needs a follow-up for the
order receive page.
Signed-off-by: Ian Walls <ian.walls@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Call LostItem() whenever item is lost.
LostItem() new arg - mark returned.
Disabled Lost Status on catalogue item edit.
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
For follow up we need to explain how to hide the 952$1 (lost) from
the framework by putting it in the 'ignore' tab.
Signed-off-by: Ian Walls <ian.walls@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
When IndependantBranches syspref is enabled, a 'regular' user can only
delete items belonging to his/her library. But a superlibrarian should
have the permission to delete items from all libraries. He can't for the
time being. This is fix by this patch.
How to test?
- On a multi-libraries Koha, activate IndependantBranches
- Log in with a superlibrarian user
- Find a biblio with one item from another library than the user home
library
- Click on Edit > Edit Items
- On the list of items, all lines have Delete link
- If you try to delete an item from another library than the user home
library, deletion will fail.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Display links to parent biblios, show linked items in holdings, allow holds on
linked items. This uses MARC to maintain relationships.
Sponsored by the Mississippi Department of Archives and History and RapidRadio
Solution. Originally developed by Savitra Sirohi and Amit Gupta at OSSLabs, with
UNIMARC support added by Zeno Tajoli. Commits squashed and merge conflicts
resolved by Chris Cormack from Catalyst. Respect for NORMARC and some small
framework portability fixes made by Jared Camins-Esakov of C & P Bibliography
Services.
IMPORTANT NOTE: A bug in the 773 coding for MARC21 was corrected from the
original OSS Labs code. The 773s generated by the pre-release code did not have
the first indicator set to '0', which means that they were not supposed to
display. Going forward, the first indicator will be set correctly, but existing
records created with this code will no longer appear (they appeared before only
due to another bug). To correct this, you could globally (or, to make sure you
only modify records created with the Analytics tool, for records with 773$0)
change the first indicator of the 773 from blank to '0'.
== Background ==
An analytic record for an item is a more detailed, monographic biblio for an
item attached to a serial record . This is often used for special issues of a
journal that are released as books on their own (assigned an ISBN, as well as an
ISSN/volume/issue). It is important for researchers to be able to search for
these items both as issues of the serial, and as monographs. It is equally
important for the library to not have duplicate item records for the item in
question to have to keep synchronized.
== Establishing relationships ==
Analytical records are connected to items belonging to parent or host
bibliographic records. This can be accomplished by:
* From an analytical bibliographic record linking to an host item by providing
the item barcode as input
* From a host item by using option "analyze", this creates a new empty
bibliographic record with field 773 (MARC21) populated
* Running a new CLI script that establishes a relationship between the
analytical record and the host item identified by the barcode in the
analytical record's 773$o (MARC21)
== Connecting Records ==
The relationships are maintained in the MARC records, we have not used database
tables at all.
== MARC Representation ==
In MARC21/NORMARC we have used:
* 773$9 to store the Koha item number of the host item
* 773$0 to store the Koha biblio number of the host bibliographic record
The above fields are used to display the relationships in various screens in the
OPAC and the staff interface. Additionally, when populating field 773 with host
item's details, we have used following MARC 21 mapping:
* 'a' <= 100/110/111 $a (author main)
* 'b' <= 250$a (edition)
* 'd' <= 260$a, 260$b, 260$c (place, publisher, year)
* 'o' <= barcode
* 't' <= 245$a (title)
* 'w' <= (003)001 --> if no 001 is available, we can populate biblionumber
* 'x' <= 022$a (issn)
* 'z' <= 020$a (isbn)
In UNIMARC, this code uses:
* 461$9 to store the Koha item number of the host item
* 461$0 to store the Koha biblio number of the host bibliographic record
When populating field 461 in UNIMARC, the following mapping is used:
* 't' <= 200$a (title)
== Treatment of Holds ==
A key requirement was to allow holds to be placed on host items from the
analytical record. We have accomplished this by allowing holds on specific
copies only. Biblio level holds are not allowed. This ensures that holds are
placed on specific items that are relevant to the analytical record.
== Deleting host items with linked analytical records ==
As we have not used database tables to maintain relationships, we had to use
search to find out if any linked analytical records are present. If 1 or more
analytical are present, we do not allow deletion of items. This is similar to
what we see when we try to delete authority records.
== Importing analytical records ==
Analytical records can be imported using bulkmarcimport or the GUI tools. The
new CLI script can be executed after the import to establish relationships with
host items. The script will establish relationships using the host item's
barcode, the barcode must be present in 773$o of the analytical record.
== What if there are two or more copies of the host item? ==
The current design will require that there be two host (773) fields, one for
each copy.
== What if there is no barcode available for the host item? ==
It is still possible to establish a relationship, by populating 773$9 with the
host's item number. However the CLI script uses barcode in 773$o to establish
relationships so it won't work where barcodes are unavailable. Also from an
analytical record, it is possible to establish a relationship to a host item by
providing the barcode as input, this option will not be available as well.
Commits that added the following features were squashed by Chris Cormack (this
is not a list of every commit):
* Display links to host records from biblio detail screens
* Support for UNIMARC, respecting the system preference 'marcflavor'
* Support holds from the OPAC
* Ability to link to items belong to host records from a analytical record
* Display items belonging to host records in the moredetail page
* Ability to edit items belonging to host records, also ability to delink from
them
* Move get host items code into a C4 routine, also calling the new routine in
related perl scripts
* Move host field population to a C4 routine, all changes in pl files to call
new routine
* Allow only specific copy holds for analytical records plus changes to use new
C4 routines
* Support for holds on items linked via host records
* Storing bibnumber and itemnumber in subfields 0 and 9, plus other mapping
changes
* New command line script that establishes relationships between analytical
records and host items and bibs. The script looks for host field (MARC21 773)
in records, and based on barcode in subfield 'o' populates host bibnumber in
subfield '0' and host itemnumber in subfield '9'. The script can be run after
an import of analytical records, it can also be run in the crontab to maintain
the relationships
* Ability to create analytical records from items, to view linked analytics, and
prevent deletion of items that have linked analytics
* New template for catalogue/detail.pl (NOTE: not a new template file, just a
new way of displaying analytics), template displays linked analytics and
allows creation of analytical records
* New zebra index for item number in host fields. This index will be used to
display links to analytical records from host records
* Display title of host record instead of the phrase host record
* Using detail.tmpl for analytics tab instead of a new template file
* Improved qualification info prepration in Prephostmarcfield
* Check for linked analytics before deleting item
* Display link to host record and more meaningful anchor text for edit item link
* Analytical record: Unimarc index in record.abs and help in
create_analytical_rel.pl
* Adding a sys pref that controls display of options to create analytical
relationships
* Add host entry in XSLT stylesheet in staff item detail
* Added host record support to OPAC detail XSLT
* Adding 773$0 and 773$9 to all frameworks
* Adding 773 subfields 0 and 9 to default marc framework via updatedatabase.pl
* Display create analytics and used in links in catalog detail
* Fixed problem where analytical records not showing in OPAC search results
because GetMarcBiblio now needs a flag to add item records
* Fixed problem where analytics count was set to 1 for all records, not just
those with analytics
* Fixed catalogue detail page not to show analytics counts if count is 0
Conflicts:
installer/data/mysql/updatedatabase.pl
koha-tmpl/intranet-tmpl/prog/en/modules/cataloguing/addbiblio.tt
kohaversion.pl
Co-author: Savitra Sirohi <savitra.sirohi@osslabs.biz>
Co-author: Zeno Tajoli <tajoli@cilea.it>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Signed-off-by: Ian Walls <ian.walls@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
GetItemsInfo in Items.pm includes this join:
LEFT JOIN branches ON items.homebranch = branches.branchcode
This means that the branch URL (from the branches table) comes out
as the URL for items.homebranch, thus the URL in the holdings
output is the item's home branch even though the display might
be showing a different current location.
This patch changes the join to use items.holdingbranch. The join
was originally added to fix Bug 3702, and based on the description
of that feature I'm assuming this change is not harmful to other
usages. However, it does make the assumption that the item's
current (holding) branch is the branch we want to see information
about.
Signed-off-by: Nicole Engard <nengard@gmail.com>
Signed-off-by: Ian Walls <ian.walls@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
The date last seen field (952 $r) and replacement price date (952 $w) were being
ignored on import, being replaced with NOW() as a hardcoded value. This patch will
allow a value to be imported, but if none is, it will use the ISO date of import
as a default.
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
Signed-off-by: Ian Walls <ian.walls@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Bugfix for problems when shelving cart used without In Processing settings
To test, with InProcessingToShelvingCart off, NewItemsDefaultLocation blank,
and ReturnToShelvingCart on, create a new item. Check the contents of the
location and permanent_location fields in its item record -- the same value
should be in both. Then run the item through checkin, and look at those fields
again. The location field should now be set to CART while permanent_location
should still have the original value. After the cart_to_shelf cron job runs
with the proper timing, check the item record again. Both location and
permanent_location should again be identical.
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Do not misleadingly document or pass an unused second parameter
makes all calls use the single parameter call as the C4
routines already did
Signed-off-by: Frédéric Demians <f.demians@tamil.fr>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Had effect of breaking item record changes when the
CatalogingLog system preference is on.
(Note to people reviewing patches - please do not modify the content
of patches that you are signing off on unless you are *sure* you
know *exactly* what you doing. The process of patch review should
not be introducing yet more bugs.)
Signed-off-by: Galen Charlton <gmcharlt@gmail.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Remove the following routines which used to
handle embedding item data in the bibliographic record:
C4::Items::_replace_item_field_in_biblio
C4::Items::_add_item_field_to_biblio
Signed-off-by: Galen Charlton <gmcharlt@gmail.com>
Signed-off-by: Claire Hernandez <claire.hernandez@biblibre.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
* no need to record full bib MARC when logging
change to an item record
* IDEA: set up a separate ItemLog syspref
Signed-off-by: Galen Charlton <gmcharlt@gmail.com>
Signed-off-by: Claire Hernandez <claire.hernandez@biblibre.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
* when item changes
* when new item is added
Signed-off-by: Galen Charlton <gmcharlt@gmail.com>
Signed-off-by: Claire Hernandez <claire.hernandez@biblibre.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
* Must signal both bibs to be reindexed
Signed-off-by: Galen Charlton <gmcharlt@gmail.com>
Signed-off-by: Claire Hernandez <claire.hernandez@biblibre.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
This is a squash of four patches by Henri-Damien Laurent
starting work on removing the copy of item record information
in the 9XX field of bibliographic records. The reason
for doing this is primarily to improve performance, in particular,
the expense of having to add/modify the bib record whenever an
item changes. Now, whenever an item changes, the bib record is
put in the queue to be reindexed; when the bib is indexed, the 9XX
fields are inserted into the version of the bib that Zebra indexes.
Since rebuild_zebra.pl runs in a separate process, the processing of the
bib record will not delay (e.g.) circulation.
As part of upgrading to 3.4, the following batch script should be run:
misc/maintenance/remove_items_from_biblioitems.pl --run
This should be followed by a complete reindexing of the bib records, e.g.,
misc/migration_tools/rebuild_zebra.pl -b -r
Signed-off-by: Galen Charlton <gmcharlt@gmail.com>
Signed-off-by: Claire Hernandez <claire.hernandez@biblibre.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Lists in the OPAC, and Cart on both sides, show the LOC code for items, rather
than the appropriate Description from Authorised Values. This is because the
code uses GetItemInfo, which is a very heavy-weight call to only retrieve some
of the desired information.
This patch introduces a new subroutine in C4::Items, GetItemsLocationInfo, which
returns the branch names for both home- and holdingbranches, the location code,
both opac and intranet location descriptions, itemcallnumber and cn_sort. This
should be used instead of GetItemsInfo in any case where the locational
information is all that's required, as it's much more streamlined and efficient.
In the OPAC Lists, this only applies if OPACXSLTResultsDisplay is 'off' (set to
'normal').
Signed-off-by: Jared Camins-Esakov <jcamins@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
The field was missing in Items.pm.
It will still act strangely if you enter a stocknumber that
already exists in the database. (see Bug 5860)
Adding/editing items with stocknumbers you have not used before
should work as expected.
[F. Demians] Was able to reproduce the bug on an UNIMARC DB. The patch works.
Signed-off-by: Frédéric Demians <f.demians@tamil.fr>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Squashed commit of the following:
commit 66cdb8804136803a3f626d183c8f192f61f3c7b1
Author: Chris Cormack <chrisc@catalyst.net.nz>
Date: Fri Feb 4 12:55:10 2011 +1300
Bug 5691: Updating copyright statement
commit 79ef6c269afc9c644c51709a7657542a0fc6d7d6
Author: Chris Cormack <chrisc@catalyst.net.nz>
Date: Fri Feb 4 12:52:13 2011 +1300
Bug 5691 - Fixing a syntax error and tidying up some formatting
commit a66485dba113c05ed51a3b4ff19f788e335aa1f6
Author: Henri-Damien LAURENT <henridamien.laurent@biblibre.com>
Date: Tue Oct 5 17:23:55 2010 +0200
(MT #1365) Delete all items
Using DelItemCheck in cataloguing/additem.pl
when deleting all items
commit fe845fd48ab22ff82ad6d8971c468c327b49f3c4
Author: Christophe Croullebois <christophe.croullebois@biblibre.com>
Date: Wed Sep 22 11:39:28 2010 +0200
(MT #1365) Delete all items
Now if IndependantBranches is on and a user try to delete all items, only the items of his branch will be deleted.
A message explain this fact.
Signed-off-by: Chris Nighswonger <cnighswonger@foundations.edu>
Followup: (MT #1365) Fixing up the English idiom
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
MT3947: items.timestamp were not updated on edition
If items.timestamp is used in the framework and hidden
the fact that it is NOT deleted before update is done would input the previous timestamp,
which is not the desired behaviour.
Signed-off-by: Chris Nighswonger <cnighswonger@foundations.edu>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Squashed commit of the following:
commit f441094d5095d165eab18340c983a831cce8f6e0
Author: Henri-Damien LAURENT <henridamien.laurent@biblibre.com>
Date: Mon Jul 5 20:33:23 2010 +0200
bug4263 followup : Can't blank subfields
Previous bug4263 reintroduced bug 2466: fix clearing item field
This keeps bug4263 followup to be assigned (donot blank dateaccessioned)
But also allow to blank item subfields.
commit 92889b766c41b48bdd0e3a33ca4b183b1e259805
Author: Nahuel ANGELINETTI <nahuel.angelinetti@biblibre.com>
Date: Fri Apr 23 13:54:30 2010 +0200
(bug #4263) dateaccessionned is cleaned on item modification
Every item modification, date accessionned is cleaned, if there is no modification made, we must'nt reset to "undef" the value.
commit 5abb2db16b2564d32e84b7cc680acbc301d73179
Author: Nahuel ANGELINETTI <nahuel.angelinetti@biblibre.com>
Date: Tue Mar 2 09:57:33 2010 +0100
(bug #4263) fix the edition of items with repeatable subfields
The subfield management in item level is broken, fields are concatenated in one field, and if the librarian edit it, the values are not selected.
This big patch fix three things:
1) saving fields that are stocked in SQL(using koha2marc mapping) are now well cut and separated in _REAL_ subfields
2) loading records with repeatable subfields are now well returned
3) Editing items with repeatable fields works well
Signed-off-by: Chris Nighswonger <cnighswonger@foundations.edu>
Bug 4263 Removing extranious block of code
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Squashed commit of the following:
commit 105de81639cbac5084e4a5c099b19569043e69ff
Author: Nahuel ANGELINETTI <nahuel.angelinetti@biblibre.com>
Date: Tue Jul 13 11:58:01 2010 +0200
(bug #4931) fix forgottens input in buttons
the previous patch missed an hidden input in next buttons that break next page. This fix it.
commit db00295a6b9d1d36fc888ba6a0558011fd6884ba
Author: Nahuel ANGELINETTI <nahuel.angelinetti@biblibre.com>
Date: Fri Jul 2 15:27:59 2010 +0200
(bug #4931) add the ability to choose home or holding branch in stocktaking
This add radio box in stocktaking to base it on home or holdingbranch
Signed-off-by: Chris Nighswonger <cnighswonger@foundations.edu>
Bug 4391 Followup: Adding back lost declaration of $branchcode
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
This adds display of "Use restrictions" authorized values
to the OPAC and the staff client for available and
not-for-loan items.
Signed-off-by: Colin Campbell <colin.campbell@ptfs-europe.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Should fix any remaining warnings with 'podchecker'
Signed-off-by: Andrew Elwell <Andrew.Elwell@gmail.com>
Signed-off-by: Galen Charlton <gmcharlt@gmail.com>
if you have a marc field, mapped to items.stocknumber, it's not saved properly in items.stocknumber
Signed-off-by: Henri-Damien LAURENT <henridamien.laurent@biblibre.com>
Signed-off-by: Galen Charlton <gmcharlt@gmail.com>
* GetItemsInfo now includes a notforloan_per_itemtype key
with the value of the item type's notforloan setting, correctly
set based on the value of the item-level_itypes syspref
* Adjusted OPAC details item status display to use that
notforloan_per_itemtype key
NOTE: one of the assumptions of item-level_itypes is that
you can have either bib-level item types or item-level
item types, but not both in the same database. In particular,
it does not establish a hierarchy where Koha checks the
item-level itemtype first, then the bib-level.
Signed-off-by: Galen Charlton <gmcharlt@gmail.com>
Also fix the barcode not found problem (due to empty lines)
Signed-off-by: Henri-Damien LAURENT <henridamien.laurent@biblibre.com>
Signed-off-by: Galen Charlton <gmcharlt@gmail.com>
This patch filters all non itemrelated fields in the marcrecord before making update
AddItemhad the same problem as ModItem
They would try and take fields which would not be item fields
Signed-off-by: Galen Charlton <gmcharlt@gmail.com>
The inventory tool was using itemcallnumber, title to sort; modified
Items.pm to use cn_sort, itemcallnumber, title so that call numbers
sorted on the padded sort field instead.
The default sort order for items attached to a title in staff mode is
items.dateaccessioned desc. This means that a particular library's holdings
will be scattered through the list -- a special problem when it comes to serial
issues. I've done a change to Items.pm that makes the sort order branch
description followed by dateaccessioned. Thus, a library's holdings will be
grouped together in the display.
* added POD
* removed optional $barcode argument - in all cases,
itemnumber is known, and we should stick with
itemnumber when retrieving an existing item
* use ModItem to do the update so that indexer
will know to reindex bib - otherwise, can't
do an accurate search of items that are on
the shelving cart.
Signed-off-by: Galen Charlton <gmcharlt@gmail.com>
Allows temporary locations corresponding to 'in processing' and 'shelving'
so that newly-created items, and newly-returned items do not show
immediately as a available. Three new system preferences govern the usage
of these features.
NewItemsDefaultLocation. If system pref NewItemsDefaultLocation is set to a location code,
all newly catalogued items will be set to the location set in this preference.
Location code must be a valid LOC authorized value type.
InProcessingToShelvingCart. if the system pref InProcessingToShelvingCart is turned on,
any items run through returns.pl with a location code for 'PROC', will be modified to
have a new location code of 'CART'.
ReturnToShelvingCart. If the syspref ReturnToShelvingCart is turned on,
all items returned other than confirmed holds will have a new location code of 'CART'.
Any item issued is automatically taken of the shelving cart.
Adds a cron script shelf_to_cart.pl which should be run hourly.
Updates all items with a location of CART to the item's permanent location.
The original location code is stored in the new items column 'permanent_location'.
Original Author: PTFS Contractor <dbavousett@ptfs.com>
This work co-sponsored by
Middletown Township Public Library, Middletown, NJ USA and
East Brunswick Public Library, East Brunswick, NJ USA
Signed-off-by: Colin Campbell <colin.campbell@ptfs-europe.com>
Signed-off-by: Galen Charlton <gmcharlt@gmail.com>
Previous conditional check with if ($restype) is not needed because a true
result for one item will result in subsqeuent items defaulting to this true
value.
Signed-off-by: Galen Charlton <galen.charlton@liblime.com>
Before this patch, we used to test for flags == 1, which was wrong when patron had all privileges.
This patch just adds a %2 to check that patron has superlibrarian privilege, and maybe something else we don't care.
I think I fixed it everywhere except in acquisition, that will be addressed by BibLibre new acquisition module.
Signed-off-by: Galen Charlton <galen.charlton@liblime.com>
This patch fix 3 things:
* fix order by
* take care of item_level-itype
* use join in sql query
Signed-off-by: Galen Charlton <galen.charlton@liblime.com>
This correct the html select default in additem.pl, and enforces use of
biblioitems.itemtype as the default in Items::AddItem. The code in
Items is to catch items added through MARC record staging.
Thanks to Joe Atzberger for suggestion.
[RM note: this patch means that an item's item-level item type,
once that item is added or updated via additem.pl,
now cannot be blank or NULL unless the biblio-level item type
is blank.]
Signed-off-by: Galen Charlton <galen.charlton@liblime.com>
This adds an option to the inventory tool causing it to ignore copies
currently on loan. This is good if you want to do inventory, but don't
want to update the date-last-seen on items currently on loan.
Signed-off-by: Galen Charlton <galen.charlton@liblime.com>
This changes the setting if default values in the inventory tool where
the min and max call number are concerned. Also changes how the query
is formed in C4/Items so that these two are not required.
Signed-off-by: Galen Charlton <galen.charlton@liblime.com>
Change made to GetMarcItem to quell a warning
changed sense of a test; defined($foo) is *not*
the same as $foo ne ''.
Signed-off-by: Galen Charlton <galen.charlton@liblime.com>
The list of previous borrowers on moredetail.pl shows the three oldest
rather than the three most recent as I expected. This changes the sql
to order descending so we get the three most recent.
Signed-off-by: Galen Charlton <galen.charlton@liblime.com>
When editing an item in the cataloging and serials
item editors, clearing a field now works.
Signed-off-by: Galen Charlton <galen.charlton@liblime.com>
This adds a new function, getitemtypeimagelocation, that returns the image
unmodified for absolute urls and returns the proper intranet or opac path
otherwise. It also updates all of the relevant files to use that function.
Signed-off-by: Galen Charlton <galen.charlton@liblime.com>
The INSERT was missing the copynumber parameter. moredetail.pl was also not setting
the copyvol template variable. This patch corrects these issues so that the copynumber
is both inserted when a new item is created (including during a bulkmarcimport.pl run)
and displayed properly on moredetail.pl
Signed-off-by: Joshua Ferraro <jmf@liblime.com>
This patch corrects what appears to me to be a few defficiencies in the documentation
for C4::items::GetItemsForInventory. I noticed them while writing test methods for this sub.
Signed-off-by: Joshua Ferraro <jmf@liblime.com>
The SQL in C4::Items::GetItemsForInventory wasn't using placeholders and
bind parameters, possibly leaving itself open ot SQL injection attacks. This
patch changes that.
I've also incliuded a test module for C4::items::GetItemsForInventory.
Signed-off-by: Joshua Ferraro <jmf@liblime.com>
1. restores a check to itemtype.notforloan to set the norequests flag
2. changes improper boolean OR with AND for checking conditions of setting norequests
3. displays 'Not for loan' for item-level itypes when the itemtype is set to notforloan
4. restores items.notforloan values < 0 allowing holds (ordered items for instance)
We still need a notforhold flag set at the itemtype, and items level
* I guess the limit by item type was never working. I made it look for the right database column
* I fixed the error that was returned with no items were returned.
Signed-off-by: Joshua Ferraro <jmf@liblime.com>
Just some code cleanup of C4::Items::GetLostItems and reports/itemslist.pl.
Some whitespace changes, perltidy, and documentation improvements.
Also, I rewrote and SQL statement to try to reduce possibilities of SQL injection attacks.
No documentation or functional changes necessary with this patch.
Signed-off-by: Joshua Ferraro <jmf@liblime.com>
I've refactored the subs I added in the previous commit so that they make a little
more sense and are in better places in the code base. I was really hoping to make use
of existing subs, but they all seemed so specific to particular uses.
The icons now show up on the OPAC item details page.
TODO: The icons still don't show up in the OPAC search results page.
Signed-off-by: Joshua Ferraro <jmf@liblime.com>
The patch update the DB by adding a row in the subscription table (serialsadditems), that is filled with the value of the syspref.
then, the syspref is deleted.
Signed-off-by: Joshua Ferraro <jmf@liblime.com>
using as_xml uses default MARC::File::XML format which is UNIMARC for marcflavour UNIMARC
And thus, causing a problem when encoding simple items marc records.
Signed-off-by: Joshua Ferraro <jmf@liblime.com>
Billing.pl -- new, gives bills that occur in a range, works
pendingreserves.pl -- fixed, works now, with branches also
reserveratios.pl -- indicates distressed reserves
itemslost.pl -- Fix to this to make it more useful and fix bugs
Itmes.pm -- small change to work for itemslost, should not affect
anything else
and all tmpl files.
Signed-off-by: Galen Charlton <galen.charlton@liblime.com>
Signed-off-by: Joshua Ferraro <jmf@liblime.com>
This fix should resolve in whole or in part several bugs
characterized by the error message 'Can't use string ("0")
as a HASH ref while "strict refs" in use', including
bugs 1101, 1899, and 1910.
There are some possibilities for future work:
[1] Dealing with an operator override, e.g., where
a circ operator needs to get a supervisor
to enter a login and password and escalate
the original operator's privileges for a
transaction, e.g., to forgive a fine. This
is an enhancement, of course.
[2] Creating a dummy operator to represent
batch job runs; or alternatively, give
each batch job an option to log its work
under a specified user ID.
Signed-off-by: Joshua Ferraro <jmf@liblime.com>
The new tables have the same structure and constraints
as the tables they archive with the following exceptions:
* borrowernumber and biblionumber in old_reserves can be
NULL
* the FK constraints (e.g., for itemnumber) on old_reserves
set the child column to NULL if the parent row is deleted
instead of deleting the child row.
* there is no FK constraint on old_issues.branchcode, allowing
a branch to be deleted without changing archived requests.
Some miscellaneous cleanup was done as part of this patch:
* GetMemberIssuesAndFines (C4::Members) now uses bind variables
* fixed POD for GetMemberIssuesAndFines
Signed-off-by: Joshua Ferraro <jmf@liblime.com>
