Address new new version of system pref
Address new version of categories DB table BlockExpiredPatronOpacActions column
Test plan, k-t-d, BEFORE applying patch:
1) Edit some patron categories, visit:
/cgi-bin/koha/admin/categories.pl
2) Set different values for the "Block expired patrons" input config
Set a category to block
Set a category to don't block
Set a category to follow the syspref
3) Take note of the current value of the BlockExpiredPatronOpacActions sys pref
Apply patch, then run the following commands
- koha-plack --restart kohadev
- yarn css:build
- run updatedatabase
4) Visit the patron categories you edited before, make sure they all have the correct values for the new config type
5) Check the BlockExpiredPatronOpacActions sys pref and make sure the new value is correct according to what was before
6) Add a new patron of one of the above categories, test that:
If 'hold' is a blocked action, patron is unable to place a hold in OPAC
If 'renew' is a blocked action, patron is unable to renew in OPAC
If 'follow sys pref' is the option, check that a patron may place a hold or renew an item according to the BlockExpiredPatronOpacActions sys pref value
prove t/db_dependent/Circulation.t
prove t/db_dependent/ILSDI_Services.t
prove t/db_dependent/Koha/Object.t
prove t/db_dependent/Koha/Patron/Categories.t
Signed-off-by: Arthur Suzuki <arthur.suzuki@biblibre.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This patch adds two new entries in the loans section of GetPatronInfo response:
- itemonhold: number of holds on this specific item.
- recordonhold: number of holds on the record.
It allows an ILS-DI client to know if a loaned item is already on hold by someone else, and how many holds there are.
Test plan:
1. Apply the patch.
2. Enable the ILS-DI system preference.
3. Check out an item for a patron and make sure there no other holds at either an item or record level.
4. Check that the new itemonhold and recordonhold entries displayed are equal to zero (example: http://127.0.0.1:8080/cgi-bin/koha/ilsdi.pl?service=GetPatronInfo&patron_id=19&show_contact=0&show_loans=1).
5. Add either a record or item level hold for the record used in step 2.
6. Check that itemonhold and recordonhold values are incremented accordingly.
Note: a hold at an item level counts as a hold at a record level, but not vice-versa.
7. Run the tests and make sure they pass: prove t/db_dependent/ILSDI_Services.t
8. Sign-off!
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch removes the older PatronLastActivity preference opting to
replace it by the new PatronLastActivityTriggers preference. The feature
can now be disabled by simply not selecting any triggers
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Add specific tests for the tag itemcallnumber in GetAvailability output.
Sponsored-by: University Lyon 3
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
It has been missed on bug 17600.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Adjusted commit title.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
On bug 17591 we discovered that there was something weird going on with
the way we export and use subroutines/modules.
This patch tries to standardize our EXPORT to use EXPORT_OK only.
That way we will need to explicitely define the subroutine we want to
use from a module.
This patch is a squashed version of:
Bug 17600: After export.pl
Bug 17600: After perlimport
Bug 17600: Manual changes
Bug 17600: Other manual changes after second perlimports run
Bug 17600: Fix tests
And a lot of other manual changes.
export.pl is a dirty script that can be found on bug 17600.
"perlimport" is:
git clone https://github.com/oalders/App-perlimports.git
cd App-perlimports/
cpanm --installdeps .
export PERL5LIB="$PERL5LIB:/kohadevbox/koha/App-perlimports/lib"
find . \( -name "*.pl" -o -name "*.pm" \) -exec perl App-perlimports/script/perlimports --inplace-edit --no-preserve-unused --filename {} \;
The ideas of this patch are to:
* use EXPORT_OK instead of EXPORT
* perltidy the EXPORT_OK list
* remove '&' before the subroutine names
* remove some uneeded use statements
* explicitely import the subroutines we need within the controllers or
modules
Note that the private subroutines (starting with _) should not be
exported (and not used from outside of the module except from tests).
EXPORT vs EXPORT_OK (from
https://www.thegeekstuff.com/2010/06/perl-exporter-examples/)
"""
Export allows to export the functions and variables of modules to user’s namespace using the standard import method. This way, we don’t need to create the objects for the modules to access it’s members.
@EXPORT and @EXPORT_OK are the two main variables used during export operation.
@EXPORT contains list of symbols (subroutines and variables) of the module to be exported into the caller namespace.
@EXPORT_OK does export of symbols on demand basis.
"""
If this patch caused a conflict with a patch you wrote prior to its
push:
* Make sure you are not reintroducing a "use" statement that has been
removed
* "$subroutine" is not exported by the C4::$MODULE module
means that you need to add the subroutine to the @EXPORT_OK list
* Bareword "$subroutine" not allowed while "strict subs"
means that you didn't imported the subroutine from the module:
- use $MODULE qw( $subroutine list );
You can also use the fully qualified namespace: C4::$MODULE::$subroutine
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Seems I missed passing trigger in the tests for ModItemTransfer. This
patch corrects that oversight.
Signed-off-by: Kathleen Milne <kathleen.milne@cne-siar.gov.uk>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Joonas Kylmälä <joonas.kylmala@helsinki.fi>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Subroutine "new" called using indirect syntax at line 456, column 14. See page 349 of PBP. (Severity: 4)
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Remove warning :
t/db_dependent/ILSDI_Services.t .. 3/10 Null value for biblionumber in Item not allowed at /home/koha/src/t/lib/TestBuilder.pm line 387
$biblio_with_no_item is a Koha::Biblio object.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Run t/db_dependent/ILSDI_Services.t with and without previous patches
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Subroutine "new" called using indirect syntax at line 415, column 18. See page 349 of PBP. (Severity: 4)
Subroutine "new" called using indirect syntax at line 420, column 14. See page 349 of PBP. (Severity: 4)
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
.pm must not have -x
.t must have -x
.pl must have -x
Test plan:
Apply only the first patch, run the tests and confirm that the failures
make sense
Apply this patch and confirm that the test now returns green
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Most of the time the tests are failing because the item is not created
correctly (missing biblio and/or biblioitem).
The usual error is:
t/db_dependent/selenium/regressions.t ..... 5/5 Can't call method "leader" on an undefined value at /kohadevbox/koha/Koha/SearchEngine/Elasticsearch.pm line 534.
In this patch we are making sure $builder->build({ source => 'Item' })
is replace with $builder->build_sample_item
Test plan:
Turn on Elastic and confirm that all the tests pass!
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
When regressions are found, we introduce regression tests :-D
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Either we display everything, or only the info from the attribute itself
(i.e. not its type)
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
And build_sample_item.
Also remove a debug statement
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Arthur Suzuki <arthur.suzuki@biblibre.com>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
TestBuilder adds random data which breaks the check constraint rule. The
simplest way to correct this situation is to override testbuilder by
passing in explicit undefs for accounttype or debit_type_code in the
tests.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
When patrons have a lot of checkouts, GetPatronInfo can take a lot of
time. This patch introduces two new parameters to allow pagination of
this list of checkouts
Also, fix a warning in C4::ILSDI::Services::GetPatronInfo
Test plan:
1. Go to /cgi-bin/koha/ilsdi.pl?service=GetPatronInfo&patron_id=X&show_loans=1
where X is a borrowernumber of a patron who has several checkouts
Verify that all checkouts are listed
2. Add '&loans_per_page=1&loans_page=1' to the URL. Verify that you have
now only one checkout listed, and that there is a new element
<total_loans> which contain the total number of checkouts
3. Increase the page number in the URL until you have seen all checkouts
4. prove t/db_dependent/ILSDI_Services.t
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Test plan:
1. Put an item into a 'transfer' state
a. Place a hold on an item in branch A for a patron of branch B
b. Check in this item in branch A and confirm transfer
2. Go to http://opac/cgi-bin/koha/ilsdi.pl?service=GetRecords&id=XXX
where XXX is the biblionumber of the biblio the item belongs to.
3. Verify you have a new <transfer> element inside //record/items/item
that contains <datesent>, <frombranch> and <tobranch>
4. Check in the same item in branch B, so that the item is not flagged
as being transferred
5. Repeat 2
6. Verify that the <transfer> element is not there.
7. prove t/db_dependent/ILSDI_Services.t
Followed test plan, patch worked as described. Also ran QA test tools
and modified files passed
Signed-off-by: Alex Buckley <alexbuckley@catalyst.net.nz>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Test plan:
1) Play with fines, should work OK
2) Try to print receipts on fines - prinfeercpt.pl, printinvoice.pl
3) git grep getnextacctno -> no occurences
4) git grep accountno should return only:
installer/data/mysql/atomicupdate/bug_21683_remove_column_accountno.perl
installer/data/mysql/update22to30.pl
misc/release_notes/release_notes_3_10_0.txt
misc/release_notes/release_notes_3_22_0.txt
5) prove
t/db_dependent/Accounts.t
t/db_dependent/ILSDI_Services.t
t/db_dependent/Stats.t
t/db_dependent/Koha/Account.t
Rescued-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Branch transfer limits are respected for placing holds in the OPAC but nowhere else. This should be remedied.
Test Plan:
1) Set up a branch transfer limit from Library A to Library B
2) Verify you cannot set up a hold for an item from Library A for pickup at Library B from the staff interface ( without overriding )
3) Verify you cannot place that hold via ILS-DI
4) Verify you cannot place that hold via SIP
4) Verify a forced hold from Library A to Library B will not show up in the holds queue
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Adds a check that is_expired exists in service GetPatronInfo.
Test plan :
Run : prove t/db_dependent/ILSDI_Services.t
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Amended patch: remove ref to bug number, we have git for that
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Currently, the ILDSI services HoldTitle and HoldItem always return a
"NotHoldable" code is the reserve is impossible. We need to know why
Test plan:
- Apply this patch
- Place a hold on a non reservable title using ILS-DI web service
(http://koha-opac.example.org/cgi-bin/koha/ilsdi.pl?service=HoldTitle&patron_id=1&bib_id=1&request_location=)
- you should get the reason instead of NotHoldable,
- Place a hold on a non reservable item using ILS-DI web service
(http://koha-opac.example.org/cgi-bin/koha/ilsdi.pl?service=HoldItem&patron_id=1&bib_id=1&item_id=1)
- you should get the reason instead of NotHoldable,
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
- Added missing GetHiddenItems parameter change case
Without this prove t had a failure.
- Always use mocks, not set_preference
- Tweaks so t/db_dependent/00-strict.t passes
There was a typo botcat vs borcat and borrowernumber was never
defined. Grabbing from userenv, like other code does.
- Tweak t/db_dependent/Items.t to fully test changes
This will test all the if structures fully in GetHiddenItemnumbers.
prove t/db_dependent/Items.t
- Tweak borrower category code
$borrower->{categorycode} on a Koha::Patron is not the
same as $borrower->categorycode. Fixed error.
- Search was returning URLS for wrong interface
There was one search context place wrong. Changed it to $is_opac
as the logic for setting $is_opac was modified correctly.
- Corrected issues with category code.
When a user isn't logged in, $borrower is undef and causes error
when determining category code. Added conditional check.
- Properly trigger all changes in C4/Search.pm
- Fix QA Test tool failures
C4/Search.pm had some tabs.
- Add some commenting to make sense of logic
- Refactor EmbedItemsInMarcBiblio parameters to hashref
- Trigger GetMarcBiblio's EmbedItemsInMarcBiblio call.
prove t/db_dependent/Items.t
- Add missing test to trigger Koha/BiblioUtils/Iterator change
- Add borrower category overrides
These files generally add borcat parameter to GetMarcBiblio.
Others might include correction of filtering of items
(opac-basket), or a comment as to why no changes were done
(opac-search).
In the case of opac-search, correcting the first FIXME will
likely correct the OpacHiddenItems issues on tags. As such,
that is beyond this bugs scope.
Some code had loop optimizations and fixes made, like a
'next unless $record' when the biblio shouldn't even be in
the list.
- Modify opac-ISBDdetail and opac-MARCdetail
Both files had similar logic. They were rearranged and
optimized, so that both files would have practically identical
initial blocks of code.
Optimizations were possible, because GetMarcBiblio
returns a filtered record, so that there is no double call
(once in the opac-### file and once in GetMarcBiblio) to
GetHiddenItemnumbers.
- Fix hiding in opac-tags
opac/opac-tags.pl was not properly hiding.
There is currently one known bug associated with tags left.
If you have two biblios tagged by different people with the
same tag, the opac-search will show the one you tagged that
is supposed to be hidden, because tag searches work differently
than regular searches. This is beyond the scope of this bug.
See the FIXME's in opac/opac-search.pl
- Trigger the C4::ILSDI::Services changes
prove t/db_dependent/ILSDI_Services.t
- Added missing 'my'
- Test C4/Labels/Label.pm changes
- Improve C4::Record::marcrecord2csv test cases
- Corrected opac-details searchResult call
- Fix breaking issues constraint in ITerator test
- Fix ILSDI_Services test when clubs with branch exist
- Rebased again!
- Rebased t/db_dependent/Items.t conflict.
The test plan is in comment #112 last I checked.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Test plan:
- Use a patron with an empty cardnumber to authenticate with ILSDI
AuthenticatePatron
(cgi-bin/koha/ilsdi.pl?service=AuthenticatePatron&username=userid&password=pass),
- make sure you have other patron(s) with empty cardnumber and there
borrowernumber is
smaller than the one you authenticate with,
- you should get a wrong borrowernumber,
- apply this patch,
- test again, you should get the right one
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
