This patch is a _requirement_ to Bug #12771, and will be necessary once we start managing more than 3 levels of overdue notice
TEST PLAN
1) Create or improve on overduerules data
.1) Intranet -> tools -> overdue notices
.2) Make sure to have data in first, second and third tabs
.3) Make sure to have checked mixes of Email/Phone/Print/SMS (depending on availability)
.4) Make sure to have different letters and delay on first/second/third tab for at least one category
.5) Remember it all.
2) Apply patch
3) run installer/data/mysql/atomicupdate/update_13624_overduerules_transport_type.pl
4) run t/db_dependant/Overdues.t
5) Validate Overdue Notice page
.1) validate data entered previously is still there
.2) Add some more, save changes, validate
In installer/data/mysql/atomicupdate/update_13624_overduerules_transport_type.pl
- A new column and primary key, 'overduerules_id', is added to the table 'overduerules'
- A new column referencing a foreign key, 'overduerules_id', is added to the table 'overduerules_transport_types'
- The columns 'branchcode' and 'categorytype' are removed from the table 'overduerules_transport_types'
- Data is migrated from the old tables to the new ones
In installer/data/mysql/kohastructure.sql :
- Table 'overduerules'
- Added a primary key named 'overduerules_id'
- Table 'overduerules_transport_types'
- Added a foreign key named 'overduerules_id'
- Dropped columns 'branchcode', 'categorycode' since we now have them referenced through 'overduerules_id'
In tools/overduerules.pl
- INSERT and DELETE queries on 'overduerules_transport_types' were changed to reflect the new schema
In C4/Overdues.pm :
- The SQL query of the function 'GetOverdueMessageTransportTypes' is changed to take into account the new design of 'overduerules_transport
In t/db_dependent/Overdues.t :
- The INSERT calls before the tests were changed to take into account the new design of 'overduerules' and 'overduerules_transport_types'
Sponsored by : Halland County Library
Signed-off-by: Jesse Maseto <jesse@bywatersolutions.com>
Signed-off-by: Martin Persson <xarragon@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch makes the default circ rules and notices/slips to edit
the logged in branch, if one is set.
Test Plan:
1) Apply this patch
2) Log into staff side, and set your library
3) Browse to Tools/Overdue notice/status triggers
4) Note the actions displayed are for your library
5) Select "All libraries"
6) Note the actions displayed are for "All libraries"
Signed-off-by: Nick Clemens <nick@quecheelibrary.org>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
If formatted dates are sent to DBIx::Class on update/insert, the date
will be set as 0000-00-00 (except if the format is yyyy-mm-dd).
Test plan:
Use the batch patron modification tools to update the dateenrolled or
dateexpiry values for at least 1 patron.
Without this patch, the modified value will be updated to 0000-00-00,
with this patch, the correct value will be set.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Add bibliotiems to the 'available fields' list for
module 'Holds' (aka reserves).
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
This patch is to display corrextly the new dmydot date format e.g. after
using the datepicker or in messages for the user, in following files:
- koha-tmpl/intranet-tmpl/prog/en/includes/calendar.inc
- koha-tmpl/intranet-tmpl/prog/en/includes/date-format.inc
- koha-tmpl/intranet-tmpl/prog/en/includes/patron-search.inc
- koha-tmpl/intranet-tmpl/prog/en/modules/tools/holidays.tt
- koha-tmpl/opac-tmpl/bootstrap/en/includes/calendar.inc
- tools/holidays.pl
To test:
- Apply patch
- Make sure that you have syspref dateformat set to dmydot
- Use datepicker in OPAC (modify birth date), verify that after
choosing a date, it is displayed correctly in the datepicker
- Use datepicker at several places in OPAC, verify that after choosing
a date the date displays properly in datepicker and that the dater format
is properly indicated (e.g. near birth date or near "Specify due date").
- Verify that datepicker works well with hoiday editing and that "From date:"
displays properly
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(See comment #23)
This patch removes stray C4::Dates (date_fromat...) from
C4/Items.pm
C4/Log.pm
C4/Serials.pm
serials/acqui-search-result.pl
t/DateUtils.t
t/db_dependent/Items/GetItemsForInventory.t
tools/koha-news.pl
Some of them were inside comments etc.
To test:
- git grep 'C4::Dates' should give no result
- git grep 'format_d' should give no result
Exception: in one cron job there exists an own sub format_date, and occurences not
related to C4::Dates
- Search for regressions
http://bugs.koha-community.org/show_bug.cgi?id=14870
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
serials/acqui-search-results.pl looks like it should be revisited,
containing code that might not be needed. Searching a vendor
in serials still works witout a problem.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch fixes the display of exceptions (was iso, is now syspref).
See comment #14 and attachment #15
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Followup for comment #10
To test:
- Go to Home > Tools > Calendar
- Add, edit, delete the different types of holidays and exceptions
- git grep 'C4::Calendar' and test such files
- git grep daysBetween to make sure that this sub is not used
- prove t/Calendar.t
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch removes C4::Dates from:
Remove C4::Dates from:
- tools/exceptionHolidays.pl
- tools/holidays.pl
- tools/newHolidays.pl
- C4/Calendar.pm
To test:
- Go to Home > Tools > Calendar
- Add, edit, delete the different types of holidays and exceptions
- git grep 'C4::Calendar' and test such files
- prove t/Calendar.t
(Amended following comments #3 and #4 / mv)
(Amended following comment #7 / 25.10.2015 / mv
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
http://bugs.koha-community.org/show_bug.cgi?id=14945
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The batch records modification tool close STDERR, it's useless and hide
warnings/errors.
Like the other processes using the BackgroundJob module, this one should
let it open.
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The origin framework is not passed on modifying the records and so the
default one is used.
This can caused data lost.
Test plan:
- Create a bibliographic record and specify a framework (not the default
one).
- Use the Batch records modification tools to modify it.
=> Without this patch, the default framework (framework code "") is used
and can deteriorate the record
=> With this patch, the record is saved using the original framework
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Tested framework is lost using tool without patch
Problem gone with patch
No qa errors
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
When using the batch deletion tool, if the script attempts to delete an
undeletable item, the script will die with the error:
Label not found for "next BIBLIONUMBER" at
/usr/share/koha/intranet/cgi-bin/tools/batch_delete_records.pl line 172.
Test Plan:
1) Attempt to batch delete a record with an item that cannot be deleted
2) Note error
3) Apply this patch
4) Repeat step 1
5) Note the error no longer occurs
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works as advertised. Follow comment 5 to reproduce the issue
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
I have not tested this patch, but looking at the code it is obviously a mistake.
If an error occured, we rollback and skip this record.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Alex Arnaud <alex.arnaud@biblibre.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Be kind and return 0 if the sample file has been generated correctly.
Otherwise you are a bad guy and you make Plack returns an internal error
(exited nonzero: 1 at /home/vagrant/kohaclone/tools/import_borrowers.pl line 390.)
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Works as expected
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Works as expected here too.
This patch does the following:
[1] Adjust authorities_merge_ajax just as in bug 14588.
[2] Replace some indirect syntax for fetch GGI::Cookie.
[3] Along the way replace some new CGI's. Note that I am not aiming to
replace them Koha wide. The "fetch class" variant is less readable.
NOTE: The changes to tools/upload-file.pl and upload-file-progress.pl
are moved to report 14321.
Test plan:
[1] Run the URL authorities/merge_ajax.pl in staff.
[2] Upload a file with Stage MARC records for import.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
[1] It runs, but also before patch
[2] File uploads without problem
No errors
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
We could certainly remove 1 or 2 call to CGI->new in tools/background-job-progress.pl
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
If a patron has restrictions and a CSV file of patrons to be overwritten
is uploaded but has no debarred / debarredcomment columns, the a new
restriction will be added that combines all the existing restrictions (
i.e. a new debarment based on the existing borrowers.debarred
and borrowers.debarredcomment fields ).
Test Plan:
1) Create a patron with one or more restrictions
2) Import a CSV file that updates that patron, but with no debarred columns
3) Note a new restrictions is created
4) Delete the new restriction
5) Apply this patch
6) Re-import the CSV file again
7) Note that no new restriction is created
8) Add debarred and debarredcomment columns to the CSV file with a test
date and description
9) Re-import the CSV file again
10) Note the new restriction is added to the patron
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Daniel Grobani <dgrobani@samuelmerritt.edu>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Why a refactoring was need for this script?
The export tool (tools/export.pl) can be called from the command line
and some parts of code were unnecessarity complicated (just look at the
code, you will understand).
Worse still, the script does not provide the same options for both
interface. For instance you cannot export records given a range of
biblionumbers, authids, callnumbers, etc. from the commandline.
What does this patch?
1/ Important: The script tools/export.pl does not work anymore if called from
the command line (should be in the release notes).
2/ The code used to generated a file (csv, iso2709 or xml) has been moved to a new
module (Koha::Exporter::Record) and tests have been provided.
3/ No change is done on the web interface
4/ Some new options have been added to the commandline script
(misc/export.pl):
- starting_authid
- ending_authid
- authtype
- starting_biblionumber
- ending_biblionumber
- itemtype
- starting_callnumber
- ending_callnumber
- start_accession
- end_accession
5/ There is a change in the behavior if an error occurs:
Can't call method "as_usmarc" on an undefined value at Koha/Exporter/Record.pm line 114.
record (number 5530) is invalid and therefore not exported because its reopening generates warnings above at Koha/Exporter/Record.pm line 117.
Before this patch, they were not displayed (using the command line).
What does not do this patch?
It does not provide the 'clean', 'timestamp' and 'deleted_barcodes' options to
the web interface (same as before).
What about the perfs?
With a DB with ~800 biblios (MARC21)
Before: perl tools/export.pl 14.79s user 0.83s system 71% cpu 21.905 total
After: perl misc/export.pl 17.19s user 0.84s system 75% cpu 24.018 total
With a DB with ~6400 biblios (UNIMARC)
Before: perl tools/export.pl 26.55s user 0.76s system 76% cpu 35.498 total
After: perl misc/export.pl 26.78s user 0.84s system 80% cpu 34.494 total
How to test this patch?
Test plan:
A. Web interface:
1/ On the current master, export some records, biblios and authorities (with
the 3 differents exports) playing with the different filters (item type,
libraries, callnumber, accession date, don't export items, remove
non-local items, don't export fields, etc.).
2/ Apply this patch, export again the same records, and compare the
generated files. They must be identical!
3/ Confirm that the export features on the checkout list
(circ/circulation.pl) works as before this patch.
B. The command line
1/ On the current master, export some records, biblios and authorities (with
the 2 differents exports) playing with the different options (date,
deleted_barcodes, clean).
2/ Apply this patch, export again the same records, and compare the
generated files. They must be identical!
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds a new column to koha_news that links a
borrowernumber to each item. This allows Koha to display the
author for each entry which makes it suitable as a simple CMS.
Changes (from rejected patch):
* Added missing kohastructure.sql changes.
* Turned the atomic update file into a SQL file and changed name
in accordance with wiki guidelines.
* Changed SQL syntax and naming to be consistent with existing code.
* Attached test plan to commit message.
Test plan:
* You need at least one news item, log in and add one from
'Administration' -> 'Tools' -> 'News'.
* Apply the patch.
* Apply database upgrade (directly or indirectly).
* Go back to Staff interface and post a new news item.
* Use the mysql command line client to connect to the Koha installation's database:
mysql -u kohaadmin -p -D koha (change username and database to values
appropiate for your system).
* Execute the following query: SELECT title, borrowernumber FROM opac_news;
* Inspect the results, the 'borrowernumber' column should be NULL for all news items
created before the patch was applied, and non-NULL for the new item created AFTER
the patch was applied.
Optional: Remove database changes via:
ALTER TABLE opac_news DROP FOREIGN KEY borrowernumber_fk;
ALTER TABLE opac_news DROP COLUMN borrowernumber;
Sponsored-By: Halland County Library
Signed-off-by: Nick Clemens <nick@quecheelibrary.org>
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Test plan:
1/ update the Schema (misc/devel/update_dbix_class_files.pl)
2/ Translate templates for some languages (es-DE, de-DE for instance)
3/ Enable them in the pref (search for 'lang') for the staff interface
4/ Go on the item type admin page (admin/itemtypes.pl)
5/ Edit one
6/ Click on the 'translate for other languages' link
7/ You are now on the interface to translate the item type's description
in the languages you want. So translate some :)
8/ Go back on the item type list view (admin/itemtypes.pl)
9/ You should see the original description (non translated)
10/ Switch the language
11/ You should see the translated description in the correct language.
If the description is non translated, the original description is
displayed.
12/ On the different page where the item type is displayed, confirm that
the translated description appears.
Think further / Todo:
1/ Update all occurrences of the item type's description (DONE)
2/ Implement for authorised values
3/ Implement for syspref value (at least textarea)
4/ Implement for branch names
5/ Centralize all the translation on a single page in the admin area
...
N/ Implement a webservice to centralize all the translations and give
the ability to sync the item types/authorised values description with
the rest of the world (push and pull).
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch removes C4::Dates from:
- tools/export.pl
- tools/import_borrowers.pl
Note: For testing, both need preparation without patch, see below.
To test export:
- Without patch applied, go to
Home > Tools > Export data > Export bibliographic records
- Define Start date / End date for Accession dates
- Export bibliographic records as 'without-patch.mrc'
- Do the same with patch, export as 'with-patch.mrc
- Compare the files, they should be the same
To test Import patrons:
- Without patch
- Go to Home > Tools > Import patrons
- Create a patron category like 'TEST' (useful for filtering...)
- Prepare a file with some patrons with category TEST to import.
Fill date of birth, enrolment date, expiry date with values
formatted in syspref format, in iso format and garbage
- Import
- Review the imported patrons (search for category TEST)
- With patch: Change cardnumber and names in import file
- Import
- Review again and compare with results from previous import.
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Bug 10020 has removed these columns, the should be removed from the
patron sample file.
Test plan:
Insert the files updated by this patch into a fresh DB, you shouldn't
get any error.
Signed-off-by: Frederic Demians <f.demians@tamil.fr>
Before applying the patch, I was able to notice the error when loading the
patron sample SQL file to a DB. With the patch, it's solved.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
$tagslib is used in subroutines and should be declare as global.
Test plan:
On the Batch item modification page, all item fields should be listed, not only the title.
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Works as expected
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Since I don't manage to make SCRIPT_NAME works directly with RequestHeader and/or
ReverseProxyPath, the easier way it to fix all the different occurrences.
Test plan:
On the import patrons page, confirm that the "Import" button does not redirect to a 'Not found' page.
You should stay on the import patrons page.
Note that if this change works, all others should work too.
Have a look at the diff of this patch and confirm there is no typo.
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Tested in patron import and item batch modification
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This variable is not used anymore in the template (and has never been
used...).
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
[was Remove C4::Dates from tools/batchMod.pl]
This patch replace the YYYY, MM and DD if defined in the default values.
This patch also removes C4::Dates from tools/batchMod.pl
To test:
- In MARC bibliographic Default framework, define a default value
for one of the in Tag 952 Subfield struture, e.g. for
subfield x Non-public note. You can define it under
'Advancde constraints'. Define the value similar to the following:
Year:YYYY Month:MM Day:DD
- Got to Home > Tools > Batch item modification
- Enter one ore more barcodes you want to modify
- Check checkbox 'Populate fields with defautl values from defautl framework
- Click 'Continue'
- Verify on the follwing screen that the field in Edit form is populated
as appropriate (in our example 'x - Non public note')
- Click 'Save'
- Verify that the items are updated as appropriate
Signed-off-by: Joonas Kylmälä <j.kylmala@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Amended commit message: This is a bug fix and can be backported. The
YYYY, MM and DD were not replaced correctly before this patch.
I got Year:2015-10-06 Month: Day:
now I correctly get Year: 2015 Month: 10 Day: 06
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
If a user modify the library when he's updating a notice, the notice
will be duplicated, instead of modified.
To reproduce:
1/ Go on the notice & slips tools (tools/letter.pl)
2/ Create a notice A for library L1
3/ Edit this notice and update the library with L2
4/ On the list view, you will observe that 2 notices A now exist, one
for L1 and one for L2.
The code in tools/letters.pl should be rebuilt completely, it becomes a
house of cards. To prevent this bug, I suggest to not let the user
modify the library value on editing a notice.
It cans be done by copying the notice to another library and remove the
original one.
Counter patch welcomed.
Test plan:
1/ Go on the notice & slips tools (tools/letter.pl).
2/ Create a notice A for library L1.
3/ Edit this notice: you are not able to modify the library anymore.
4/ Copy the notice to library L2. You are not able to modify the library
neither.
Works ok.
Signed-off-by: Amit Gupta <amit.gupta@informaticsglobal.com>
Signed-off-by: Nick Clemens <nick@quecheelibrary.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
this patch adds Koha::Cache functionality to the 'single_holidays' table
it is a performance patch for the problem described in BZ14315, only
http://bugs.koha-community.org/bugzilla3/show_bug.cgi?id=14315
it replaces slooow DateTime holiday objects with simple Ymd strings (19991230), then stores the strings in an @array using Koha::Cache
it does not attempt to add caching to all holiday tables - just the single_holidays table (at this stage
on my test (master-cd9a827); nytprof showed a time reduction of the single_holidays() sub - from 61.7s to 587ms
here are some before/after nytprof runs, (really on master-cd9a827, not 3.20)
http://x1.kohaaloha.com/i/nyt-bz14522-before/home-mason-g-k-3-20-x-Koha-Calendar-pm-1485-line.html#237http://x1.kohaaloha.com/i/nyt-bz14522-after/home-mason-g-k-3-20-x-Koha-Calendar-pm-1485-line.html#280
to test...
1/ add a bunch of single_holidays to your test koha, (my table has 400 holiday rows)
2/ add a loong circ rule for an itemtype (my rule has 140 days)
3/ checkout an item to a user (took me 67 secs)
apply patch...
4/ return item
5/ repeats steps 1..3, (took me 6 secs)
6/ add/change/delete some various single_holidays, via Home->Tools->Calendar
ensure that your various changes have indeed saved correctly
for extra points...
7/ run tests t/Calendar.t and t/db_dependent/Holidays.t, with all tests pass OK
sudo koha-shell -c ' export PERL5LIB=/home/mason/g/k/master ; \
cd /home/mason/g/k/master ; perl t/Calendar.t ; perl t/db_dependent/Holidays.t ' testkoha
8/ run QA tool, with all tests pass OK
sudo koha-shell -c ' \
export KOHA_CONF=/etc/koha/sites/mayo2/koha-conf.xml \
export PERL5LIB=/home/mason/g/k/master:/home/mason/qa-test-tools/ ; \
cd /home/mason/g/k/master ; perl /home/mason/qa-test-tools/koha-qa.pl -c 1 ' testkoha
Signed-off-by: Nick Clemens <nick@quecheelibrary.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
If a item is lost and issued, and you modify it in a batch, the item
will be marked as returned. It should only be returned if the item is
marked as lost.
Test plan:
1/ Check an item out and mark it as lost
2/ Edit it in a batch (tools/batchMod.pl) and edit a field (notes for
instance)
3/ The item should still be issued to the patron
4/ Edit it in a batch and edit the lost value, marked it as not lost
5/ The item should still be issued to the patron
6/ Edit it in a batch and edit the lost value, marked it as lost
7/ The item should have been returned.
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works as advertised. Just one comment, lost status can be changed only if you change default framework to another framework then edit the item. If you change it in Item menu at left side of screen this will remove the item from patron’s checkouts and patron charged for lost item.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
For testing purposes the lost item field can be set to visible
in the framework used. That will allow changing it without
returning it at the same time.
The other option is using the longoverdues.pl script.
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Based on QA comments, this patch does the following:
[1] Destroy an empty DESTROY.
[2] Promote some comment lines to POD.
[3] Use File::Spec->catfile in sub _full_fname.
[4] Remove variable interpolation from a sql query.
[5] Add a comment in upload-file.pl.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Run the unit test again, and uploaded a file.
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The new Upload.pm, unit test and file-upload.js obsolete a number of
files, including an older jQuery plugin.
The test files progressbar.pl and progressbarsubmit.pl are outdated and
do not serve any purpose in this form. (Actually, we could argue if they
should be here or just be part of a debugging phase.)
Test plan:
[1] Git grep on file-progress, file-upload.inc, UploadedFile,
ajaxfileupload, ajaxFileUpload
UploadedFile: Only a reference to DBIx file is found
ajaxfileupload: Only release notes
[2] Upload a file with tools/upload and stage-marc-import.
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch makes the following changes to achieve that:
[1] Use Upload.pm in stage-marc-import.pl, upload-cover-image.pl,
offline_circ/process_koc.pl and enqueue_koc.pl.
[2] A new file-upload.js replaces file-upload.inc in the associated template.
We now use ajax to get progress figures instead of launching perl script
upload-file-progress.
The js changes now also allow for aborting a file upload.
[3] Adds a tools/upload script and template. It allows to upload multiple
files at once.
[4] Makes upload-file return error messages in JSON. For a multiple upload,
we could have some files with errors and others without errors.
The upload is now marked as Failed only if there was no upload at all.
[5] The upload plugin is converted to use tools/upload with plugin param.
Deleting an upload is now presented via the search results form.
NOTE: In editing the process_koc.tt I noticed that the form enqueuefile was
hidden and no longer used (with associated code in process_koc.pl). When a
file has been uploaded, I display the form again (with the Apply directly
button). The code still works.
NOTE: We fix an error in upload-file from one of the patches of bug 6874.
The userid of the Koha admin user is passed to haspermission, but we
should pick the userid from the session.
NOTE: Bug 14686 will add a specific permission for tools/upload.pl, and
will add the tools/upload script to the Tools menu.
For now, you need edit_catalogue to start upload.pl and you will
additionally need a permission like upload_local_cover_images
to successfully upload a new file.
Test plan:
[1] Upload a marc file in stage-marc-import. (This is temp storage.)
[2] Check new entry in table uploaded_files. Look for the file in your
temporary directory (/tmp ?), subfolder koha_upload.
Bonus: Remove permissions on this subfolder. Retry, check error and
restore permissions again.
[3] Upload another (larger) file and abort the upload. Check table and
directory again. You should have a partial file, but no record.
[4] Verify that Stage for import still works as expected.
[5] Test Upload local cover image. (Enable OPACLocalCoverImages.) You can
test an individual image or a zip file including images and a file
called datalink.txt (with lines biblionumber,filename).
[6] Test uploading a offline circulation file:
Enable AllowOfflineCirculation, and create a koc file (plain text):
Line1: Version=1.0\tA=1\tB=2
Line2: 2015-08-06 08:00:00 345\treturn\t[barcode]
Note: Replace tabs and barcode. The number of tabs is essential!
Checkout the item with your barcode.
Go to Offline circulation file upload. Upload and click Apply directly.
Checkout again. Upload again, click Add to offline circulation queue.
[7] Upload three files via tools/upload.pl with a category and marked as
public. Check the results in the table.
Verify that you can download the file in OPAC without being logged in.
[8] Pick one new file and one of the files of step 7. Upload them in the
same category. One upload should succeed. Check for reported error.
[9] Connect upload.pl to field 856$u.
Goto Cataloguing editor.
In an empty 856$u, click the tag editor. Upload a file and click Choose.
Save the record. Open the record in the OPAC and click the link.
Copy this link to your clipboard for next step.
[A] Go back to editor. Click the tag editor on the same 856 field.
Choose for Delete.
Open the link in your clipboard again. Error message?
[B] Check the process of upload, search, download and delete of an upload
with some diacritical characters in the filename. (Bonus points for
adding special chars in the category code.)
Note: You can add categories via authorized values, UPLOAD key.
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Bug 14321: [QA Follow-up] Perltidy upload.pl
Run perltidy -pro=xt/perltidyrc on tools/upload.pl.
No other changes.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Test plan: See Bugzilla.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
The inventory tools automatically check in items, this patch adds it as
an option.
Test plan:
1/ Check an item out, fill a file with its barcode, and use this file in
the inventory tools.
2/ Check the new checkbox and confirm that the item is not checked in
3/ Repeat again and don't check it, the behavior should be the same as before
this patch.
Signed-off-by: Jason Robb <jrobb@sekls.org>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Added a missing </li>.
Patch works as expected.
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
This patch add the new value for the MTT action.
It updates the marc_modification_template_actions.action DB field to
allow 'copy_and_replace_field'.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Currently it's not possible to include information about which
issue has arrived in the serial notification notice the patron
can subscribe to from the OPAC.
The patch makes the fields from the subscription and serial
table available to the notice template.
In order to be able to print information about the correct
issue, the GetAlert has been modified to expext the serialid
as externalid when the module is issue.
git grep SendAlerts (only call with 'issue' is in Serial.pm)
To test:
- Add a subscription, select a patron notification template
- Search for the record in the OPAC
- Go to the subscription tab - More details
- Subscribe to the notification
- Edit the notice template you selected for the subscription
- add fields from subscription
- add fields from serial (serial.serialseq has the issue
information)
- Receive an issue for the subscription
- Check that you have received the notification and that
all information has been printed correctly
NOTE: notice is sent directly, not through the message_queue
Followed test plan, works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The script dies with
Can't use an undefined value as a HASH reference at tools/export.pl
line 149.
if it is called from the command line.
This is introduced by bug 13040.
The C4::Context->userenv is not defined in this case.
Test plan:
Execute the script using the command line.
With the patch applies you should not get the error.
Signed-off-by: Joonas Kylmälä <j.kylmala@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Tools > Export data produces a file badly encoded, when marc/xml file
format is chosen. It works with CSV.
To test:
1. Tools > Export data
2. Choose a limited interval of biblionumber
3. Export in marc/xml/csv.
4. Check files exported at 3: csv file is ok. marc/xml files are
corrupted, ie badly encoded.
5. Apply the patch
6. Repeat steps 3&4, and confirm that all file formats are valid.
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Fixes the tab char qa test suite fails in the following files:
1/ tools/upload-file-progress.pl
2/ tools/upload-file.pl
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Amended patch: tidy whitespaces
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Test plan:
Verify that the circulate_remaining_permissions perm is enough to upload
.koc file.
Signed-off-by: Indranil Das Gupta (L2C2 Technologies) <indradg@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
When creating a new notice, warn is triggered "Argument "" isn't numeric in numeric gt (>) at line 400". Same warn is triggered when changing Koha module option to any other module.
To test:
1) Go to Tools, then Notices & Slips
2) Click 'new notice'. Notice warn in intranet-error.log
3) Change Koha module to another module. Notice warn is triggered for every change
4) Apply patch and reload page
5) Change Koha module to another module. Notice there are no longer warns
6) Go back to Notices & Slips and click 'new notice' again. Notice there are no warns
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
When changing Koha module to 'Circulation', there is a warn saying that $code is uninitialized. This patch sets $code to an empty string to silence the warn.
To test:
1) Go to Tools, the Notices & Slips
2) Click 'new notice' (This will trigger warns, but ignore these as they will be corrected in the next patch)
3) Change Koha module to 'Circulation'
4) Notice warn about uninitialized $code variable
5) Apply patch and reload page, change Koha module to 'Circulation'
6) Notice page still works and warns are gone
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
This patch uses check_api_auth instead of get_template_and_user.
Test plan:
Confirm that you are still able to access to the quote editor with the
edit_quotes permission.
Confirm that you are not if you don't have the permission.
wget your_url/cgi-bin/koha/tools/quotes/quotes_ajax.pl
should return "403 : Forbidden."
Signed-off-by: Indranil Das Gupta (L2C2 Technologies) <indradg@gmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Most of them were found and fixed using codespell.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
http://bugs.koha-community.org/show_bug.cgi?id=14383
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
After receiving an error while attempt a simple inventory run,
Two lines were changed from:
...$_->...
to
...$item->...
since the loop variable is $item. And $_ is not set to the
expected hash reference, when there is a loop variable.
This also helps explain the "Why are there blank dates on my
last seen field?" problem that has been mentioned by users.
TEST PLAN
---------
1) Apply this patch after a reset to master.
2) Log in to staff client
3) Add one item via z39.50, setting barcode to a known value (BARCODE1)
4) Wait for the reindex
5) Home -> Tools -> Inventory/Stocktaking
6) Browse for a file with the barcode in it
7) Set the library dropdown to the library branch of the added item.
8) Check 'Compare barcodes list to results:'
9) Click 'Submit'
-- This should not die under plack.
This should not generate blank last seen dates.
The last seen dates should be as expected.
10) run koha qa test tools
11) Confirm the two change point correspond to the two change points
in the patch which shall not be pushed to master.
The test result comply with expected outcome outlined in test plan.
Signed-off-by: Indranil Das Gupta (L2C2 Technologies) <indradg@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
The call to RmPatronImage is still passing cardnumber as its parameter
instead of borrowernumber.
Test Plan:
1) Upload a patron image
2) Ensure the card number is not the same as the borrower number
3) Attempt to delete patron image
-- Image will remain
4) Apply this patch
5) Attempt to delete patron image
-- Image will be removed
6) run koha qa test tools
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The current code uses
$barcode = <fh>;
logic. This reads until \n, as far as I can tell.
EOL is indicated by \n, \r, and \r\n depending on OS and software.
So, to this end, rather than File::Slurp (which is a potential
memory hog, which is already an issue with no filters), a loop
to pre-read the barcodes was written.
This loop includes:
$barcode =~ s/\r/\n/g;
$barcode =~ s/\n\n/\n/g;
my @data = split(/\n/, $barcode);
push @uploadedbarcodes,@data;
So, that means that lines ending in \n would have it stripped
and pushed into the uploaded barcodes array.
Lines ending in \r would likely be read as one giant block,
have everything converted to single \n's and then using a split,
the set of barcodes are pushed into the uploaded barcodes array.
Lines ending in \r\n would get that stripped and pushed into the
uploaded barcodes array.
It is then the uploaded barcodes array that is looped over for
validating the barcodes.
TEST PLAN
---------
1) Back up your database
2) Download the three sample files (or create your own)
3) Log in to staff client
4) Create a branch with no inventory.
5) Home -> Tools -> Inventory/Stocktaking
6) Browse for your '\r' test file.
7) Limit to just that branch
8) Click 'Submit'
-- Confirm expected errors
9) Repeat steps 5-8 with the '\n' test file.
10) Repeat steps 5-8 with the '\r\n' test file.
-- one of these repetitions should have problems.
11) Apply patch
12) Repeat steps 5-8 for each of the 3 test files.
-- there should be no issues.
13) run koha qa test tools.
Note: This is a tweak based on Jonathan Druart's comment #16
I have reset it to needs sign off again.
Followed test plan. Works as expected. qa OK.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Test plan:
1) Go to any detail page in staff
2) Click on the modification log tab
3) Verify, that the object is prefilled with the records biblionumber
and you can also see it as parameter in the url
4) Click a second time on modification log to reset your search
Before this patch, the object parameter was empty.
It now contains the value of the biblionumber.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Work as described, no koha-qa errors
http://bugs.koha-community.org/show_bug.cgi?id=10335
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
If an error occurs in patron batch modification, a message similar to the following is displayed:
Can not update patron with borrowernumber 7055
It would be useful to have the cardnumber as well.
This patch adds the card number to the lists of errors.
It is not easy to trigger an error (see comments).
For testing, I tweaked the sub ModMember in C4/Members.pm to always return false.
TEST PLAN
---------
1) Log in as a superlibrarian and create a test user
2) Change the cardnumber to a number differing from the
borrower number.
3) Home -> Tools -> Batch patron modification
4) Type in the cardnumber of that test user
5) Check the Library checkbox.
6) Click Save
-- nice error, but it is borrower number instead of
the card number which was entered.
7) Apply the patch
8) Repeat steps 3-6
-- nice error, but it is now more informative.
9) run koha qa test tools.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
On importing authority records, the items related string should not be
displayed.
Test plan:
1/ Import an authority record
2/ Confirm the item related string are not displayed.
3/ Before this script, the record_type param was lost just after
importing the records. Now you should see
"Processing authority records" of "Processing bibliographic records" in
the "MARC staging results"
4/ Revert the import and check there is not item related strings.
No behavior should exist on importing bibliographic records.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Bug 12412 introduced a way to use plugins to generate MARC records
out of any arbitrary format. But failed to properly check for
a valid configuration (plugins_enabled entry on koha-conf.xml, and
even the UseKohaPlugins syspref).
This patch makes tools/stage-marc-import.pl test for the required
configuration before attempting to create the Koha::Plugins object.
To test:
1/ Make sure you don't have a plugins_enabled entry on your koha-conf.xml file
2/ On master, browse to tools/stage-marc-import.pl
=> FAIL: You get a nasty "Can't call method "GetPlugins"..." error
3/ Apply the patch and reload
=> SUCCESS: Stage MARC for import page renders correctly
Repeat with plugins_enabled == 0 and == 1. Also UseKohaPlugins enabled/disabled.
It should work as expected.
Regards
Tomas
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Works as described, no koha-qa errors
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch is a rough start. I believe it runs exponentially
faster, but its equality to the previous version needs to be
tested before I clean it up to acceptable standards.
Nested hashes of hashes was being a debugging nightmare.
Moved the SQL select to C4::Koha.
Changed the GetItemsForInventory to have a hashref parameter.
Added interface, in case there is a need for 'opac' vs. 'staff'.
Added t/db_dependent/Items/GetItemsForInventory.t
Added t/db_dependent/Koha/GetKohaAuthorisedValuesMapping.t
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Many libraries would like to be able to import various types of files as
MARC records ( citations, csv files, etc ). We can add a new function to
the plugins system to allow that kind of behavior at a very custom
level.
Test Plan:
1) Ensure you have plugins enabled and configured correctly
2) Installed the attached version 2.00 of the Kitchen Sink plugin
3) Download the attached text file
4) Browse to "Stage MARC records for import"
5) Select the downloaded text file for staging
6) After uploading, you should see a new area "Transform file to MARC:",
select "Example Kitchen-Sink Plugin" from the pulldown menu
7) Click 'Stage for import"
8) Click 'Manage staged records"
9) You should now see two new MARC records!
Signed-off-by: Aleisha <aleishaamohia@hotmail.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described - interesting new feature.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch displays the address information in the left column of the patron's pages using the new system preference.
The address is formatted in member-display-address-style-us.inc and member-display-address-style-de.inc
To test:
- Apply patch on top of 1st and 2nd patch
- Select 'German style' in system preference 'addressformat' in I18N/L10N
- Verify that the address information displays properly in the left column of all patron's pages.
- Verify that the address displays properly in the main area of moremember.pl as well (Note: In right column, Alternate address /contact are not yet touched))
- Switch system preference to US style, repeat checks
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
AMending without changes to put this patch at the end of the patch list / Marc
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Courret <scourret@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Bug 11395 uses the session to store the report sent to the interface
(update on biblio XX OK, etc.).
If the session is stored in mysql, the max size of the
sessions.a_session will be reached easily (TEXT field).
To reproduce:
0/ Set SessionStorage to 'mysql'
1/ Create a file with 500 biblionumbers:
mysql -e "select biblionumber from biblio limit 500;" | tail -n 500 > /tmp/biblionumbers.txt
2/ Define a marc modification template (something like "delete field 99$9" is nice)
3/ Load the /tmp/biblionumbers.txt in the batch biblio modification tool
4/ Repeat 3
You will get:
Syck parser (line 1534, column 6): syntax error at
/usr/lib/i386-linux-gnu/perl5/5.20/YAML/Syck.pm line 75.
None Koha page is reachable.
It comes from get_template_and_user > checkauth > get_session >
l.1595 $session = new CGI::Session("driver:MySQL;serializer:yaml;id:md5", $sessionID, {Handle=>$dbh});
5/ Get your sessionID contained in your CGISESSID cookie
Have a look at the value a_session in the sessions table:
mysql> select a_session from sessions where id="YOUR_SESSIONID";
You should see that the yaml is not correctly ended.
The size of the DB field has been reached and the yaml is truncated.
Test plan:
0/ Delete your CGISESSID cookie
1/ Try to reproduce the previous issue
2/ After the second batch, have a look at the sessions table and confirm
that only one job_$JOB_ID exist in the yaml
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
NOTE: Nicely clears batch job session information.
(2) is incorrect. This cleans up after a full run.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Chris Nighswonger <cnighswonger@foundations.edu>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
http://bugs.koha-community.org/show_bug.cgi?id=9987
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch implements the use of Koha::FrameworkPlugin in Cataloguing,
Authorities, Acquisition, Serials and Tools.
The main change is architectural: see the commit message of the previous
patch. No changes in behavior are expected, but the support of new events
may provide additional functionality in the future. Some small bugs are
resolved along the way.
The change primarily focuses on the MARC and items editor in Cataloguing.
But the MARC editor for Authorities and the item editor in Acquisition,
Serials and Tools are touched too. This commit message gives some comments
per module.
NOTE FOR CATALOGUING:
A new plugin without popup (or other click event code) now shows the title
No popup when hovering over the tag editor image. The image alerts the
user on a plugin, the title tells about its status. The noclick property
allows for further style modifications in the template. Note that a
follow-up patch will clean up the old style plugins too with the same
effect.
Some additional code in cataloging.js makes it possible to clone subfields
with plugins (although only theoretically useful). The clones use the
same javascript functions but event.data contains an updated id.
This effectively resolves bug 13306. Note that if old plugins do not use
the javascript parameter for the id but the perl variable, cloning does
still operate on the wrong field (with and without this patch set).
In the absence of report 12176 in master, it is not yet necessary to modify
additem.tt. When it gets pushed, it should be an easy rebase.
New style item plugins will no longer need an extra parameter. (The code in
the FrameworkPlugin object actually takes care of that.)
NOTE FOR AUTHORITIES:
This patch also adds class name tag_editor to the buttonDot anchors. This
effectively makes the same tag editor image appear as in Cataloguing.
Futhermore it removes the button from the tab sequence if there is no click
event (really effective after conversion to the new style, since the old
style plugins contain empty onclicks and launchers).
Both small adjustments increase consistency between auth and bib edits.
NOTE FOR ACQUISITION:
In Acquisition two scripts use an item editor, but in a different way.
The scripts addorderiso2709 and neworderempty both rely on the routine
PrepareItemrecordDisplay in C4::Items, but neworderempty creates item
blocks dynamically via an ajax call to services/itemrecorddisplay.pl.
In order to make the dynamic item blocks work with plugins, some code
changes were needed in additem.js. (Normally the event binding is done
at document ready time; now it must be done later.)
At this moment the routine in Items.pm contains the html tags, and this
makes changes to the following templates not necessary for now:
* acqui/addorderiso2709.tt
* services/itemrecorddisplay.tt
Report 13397 has been opened to address moving the html to the templates.
NOTE FOR SERIALS:
Script serial-edit relies also on C4::Items (just as in Acquisition).
This makes changes to serials/serials-edit.tt not necessary for now.
NOTE FOR TOOLS:
The current code in tools/batchMod.pl allows the use of plugins for batch
modification of items. This patch just converts that code to use the new
object. Most item plugins however may not be very useful for operating on
multiple items at once.
PERFORMANCE:
I have benchmarked build_tabs in addbiblio to see how especially the
additional processing of the javascript in the FrameworkPlugin object
would impact performance. Testing default MARC21 framework with 8 plugins
gave the following figures:
- Old situation: 851 ms
- New situation: 942 ms (+10,7%)
- New situation after plugin cleanup: 881 ms (+3,4%)
Note also that adding lines for event binding is compensated by removing
lines for unused events. Page load should essentially be the same.
TEST PLAN:
Suggestion: If you also apply the next patch with the EXAMPLE plugin, you
can test with a rather harmless plugin (with popup) on various places :)
But your test should also include old style plugins, with[out] popups.
If you want to test a new plugin without popup, rename/remove Click$id
in the javascript code of the $builder definition (temporarily).
[1] Test Cataloguing:
- Add/Edit biblio. Try plugins with and without popup.
- Add/Edit items. (EXAMPLE can be used as an item plugin with popup.)
- Clone a subfield with plugin (use EXAMPLE): Verify that the plugin
works on both original and clone with the respective field values.
Is the value put back in the right field too?
[2] Test Authorities:
Edit an authority record. Try plugins with an without popup.
[3] Test Acquisition:
Set system preference AcqCreateItem to "placing an order".
Check the item editor in the following two places:
a- addorderiso2709: Open a basket, add an order from a staged file.
Select a file, click Add orders, and go to tab Item information.
b- neworderempty: Open a basket, add an order from a new empty record.
[4] Test Serials:
Check the item editor on serials-edit. Go to subscription detail.
Click Receive. Choose "Click to add item". (Note that this subscription
should create an item record when receiving this serial.)
[5] Test Tools:
Check the item editor for batch item modification. Enter a few valid
barcodes and press Continue to reach the item editor.
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
To reproduce:
Go to Home > Tools > Logs
Check intranet-error.log.
You will find a line similar to:
viewlog.pl: Use of uninitialized value $src in string eq at (...)/tools/viewlog.pl line 70., referer: http://(...)/cgi-bin/koha/tools/tools-home.pl
To test:
Apply patch.
Verify that no more warnings appear in intranet-error.log
Verify that the log viewer behaves as before.
Signed-off-by: Andreas Hedström Mace <andreas.hedstrom.mace@sub.su.se>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patchs adds the item information in the diff view.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
If you come from the biblio detail page and click on "modification log",
you should get the circ menu, not the tools menu.
Test plan:
1/ Go on a biblio detail page
2/ Click on the "modification log" tab
3/ You should get the modification log page with the circ menu.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The modules and actions selected by the user are now selected when a
log search is done.
Note that this patch also add the multiple attribute to the actions
select in order to add the ability to select several actions.
The code to do that already existed.
Test plan:
1/ Go on the log viewer tool (tools/viewlog.pl)
2/ Launch a search with modules and actions selected.
3/ Confirm that the values you have selected is still selected after the
search.
Patch works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
It appears that bug 8970 has introduced a bug where a MARC file uploaded
for staging fails to import *unless* a matching rule is selected.
Test Plan:
1) Apply this patch
2) Stage and import a MARC record *without* choosing a matching rule
3) Note the staging works as expected
Signed-off-by: Cindy Ames <cmurdock@ccfls.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch is the main patch.
This feature adds the ability to link patrons to an order.
On that way, they will be notified when the order is completely
received.
Test plan:
1/ Execute the updatedb entry and verify you have a new notification template in your table (tools/letter.pl).
code: ACQ_NOTIF_ON_RECEIV, module: acquisition
2/ You can edit it if you want
3/ Create a basket and create an order with 1 or more items
4/ Link 1+ patrons to this order
5/ Close the basket and receive the order
6/ When you have received all items for this order, all patrons attached
will be notified. Check the message_queue table to check if the letters
have correctly been added to the queue.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
"item not scanned": when calling GetItemsForInventory, datelastseen should
be used when "compare barcodes list to result" is checked.
Otherwise, when loading multiple barcodes files for the same inventory, many
items will be marked as "item not scanned" when loading the last barcode file
("compare barcodes list to result" checked) even though they were scanned.
"wrong place": when searching for wrongly placed items, we should only check
for the location (callnumbers, location and branch). To fix this, A new call
to GetItemsForInventory has been made with location filters only.
Otherwise, any item with a different itemtype for instance will be marked as
wrong place even if the location is correct.
Test plan:
"item not scanned" status:
1) Split a barcode file in two.
2) Load the first barcode file without checking "compare barcodes list to result".
3) Load the second barcode file with "compare barcodes list to result" checked.
4) Check in the csv report that you have a lot of scanned items with the "item
not scanned" status.
Then apply the patch, do the same, and check that the false "item not scanned"
statuses are gone.
"wrong place" status:
1) Load a barcode file with barcode matching an item that has a correct
location, but a different itemtype than what you're looking for.
2) Check in the results that this item will be marked as "change item status"
and "wrong place".
Then apply the patch, do the same, and check that the only status for this item is "change item status", which is correct.
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch fixes the following issue:
If the user comes from a basket, the list view is displayed but there is
no way to select the modification template.
Now the template can be chosen on the list view. This way, the user is
able to change the modifications to apply and see the previewed records.
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch offers a new tool to modify records in a batch.
This feature adds:
- a new pl/tt files tools/batch_record_modification
- a new permission: tools > records_batchmod
Test plan for biblios:
0/ Create a new marc modification template with some actions.
1/ Generate a list of biblionumbers you want to modify.
There are two ways to generate a list of biblionumbers:
- using the basket: do a search, add some biblio to your basket, open
the basket and click on the "Action" button > "Modify"
- generating a list from a report
2/ On the "Batch record modification" tool verify:
- information is correct.
- the preview link show you the needed record.
3/ After clicking on the "Modify selected recors" button, verify
the records have been modified as you wanted.
Test plan for authority:
0/ Create a new marc modification template with some actions.
1/ Generate a list of authid using a report:
2/ On the "Batch record modification" tool verify:
- authorities are display with the summary.
- the preview link show you the needed record.
3/ After clicking on the "Modify selected recors" button, verify
the records have been modified as you wanted.
Catch of errors:
if an error occurs during the modification process, the tool
displays an error message.
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
The a patron's userid should be a matchpoint in the same manner as
cardnumber. Though not enforced as a unique key by the database yet
( pending bug 1861 ), this field is effectively unique as uniqueness
is enforced by Koha itself.
Test Plan:
1) Apply this patch
2) Browse to tools/import_borrowers.pl
3) Download the starter CSV file
4) Edit the csv file to include 1 or more patrons
* Make sure to leave the borrowernumber field empty
* Make sure the userid field matches the patrons you wish to overwrite
5) From import_borrowers.pl, upload your file
* Set "Field to use for record matching" to "Username"
* Set "If matching record is already in the borrowers table" to "Overwrite the existing one with this"
6) Click "Import"
7) Verify the patrons in your file have been updated in Koha
Signed-off-by: Frederic Demians <f.demians@tamil.fr>
Do exactly what's announced. This may help.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
To reproduce:
1/ Go on tools/export.pl
2/ Export some records and specify you don't want the fields 245 (the
whole field, do not specify a subfield).
3/ Export, BOOM
Software error:
Arguments must be MARC::Field object at /home/koha/src/tools/export.pl line 400.
Test plan:
Apply the patch and confirm the fields 245 are not exported and the
export works as expected.
Signed-off-by: Robin Sheat <robin@catalyst.net.nz>
Export fails to asplode with this patch
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This allows the exporter (Tools -> Export) to have any combination of
branches selected, rather than it being all or only one.
Test Plan:
* Apply the patch
* Go to the exporter, see that instead of a dropdown you now have an
elegently laid out grid of branches you can select from
* Select some branches, run the export
* Note that only records with items in the selected branches are
returned.
* Repeat this with the item related options (as that code was refactored
slightly) and make sure everything is sane.
Sponsored-By: South Taranaki District Libraries
Signed-off-by: Thomas <tomsStudy@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Prior to perl 5.12 keys can only operate on a hash. So although
$data[0] ( thats an abysmal variable name! ) will contain a hash ref
the perl compiler cannot deduce that from the context and gives
a syntax error. Add the hash sigil to make the context explicit and
the compiler can generate the correct code.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch could have only been
- name => $values[0]->{name},
+ name => $letter->{name},
Other changes are just indentation and variable names (send an hashref
$letter to the template and use the Branches TT plugin to display the
branch name)
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
C4::Letters::getletter does not set mtt in value ( i.e. { email => "my
email notice} ) at the contrary of the get_letter routine defined in
tools/letters.pl.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch fixes a major issue introduced by the
commit 5c4fdcf Bug 11742: A letter code should be unique.
The interface should let the possibility to create a default template
letter and some specific ones, with the same letter code (letter.code).
The patches submitted on bug 11742 tried to fix an issue based on a
(very bad) assumption: letter.code should be considered as a primary key and
should be uniq.
This patch reintroduces this behavior.
Note that the interface will block a letter code used in different
module (this is consistent not to have the same letter code used for different
needs).
This patch is absolutely not perfect, it just tries to change as less
change as possible and to use new tested subroutines.
Test plan:
1/ Verify that the problem raised on bug 11742 does not appears anymore.
2/ Verify there are no regression on adding, editing, copying, deleting
letters.
3/ Verify you are allowed to create a default letter template with a letter
code and to reuse for a specific letter (i.e. for a given library).
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
In inventory results, CSV or screen, the item withdrawn information is missing.
This information can be usefull to understand why an item was not scanned.
Test plan :
- Check you have in default framework an item subfield mapped with items.withdrawn
- Create a biblio with default framework
- Create an item with barcode='000AAA1', callnumber='ZZZAAA1' and withdrawn=0
- Create an item with barcode='000AAA2', callnumber='ZZZAAA2' and withdrawn=1
- Go to inventory tool : /cgi-bin/koha/tools/inventory.pl
- Enter item callnumber between 'ZZZ' and 'ZZZZ'
- Submit
=> You see a column 'Withdrawn' with withdrawn value
- Go to inventory tool : /cgi-bin/koha/tools/inventory.pl
- Enter item callnumber between 'ZZZ' and 'ZZZZ'
- Check 'Export to CSV file'
- Submit
- Open exported file
=> You see a column 'Withdrawn' with withdrawn value
Signed-off-by: Nick Clemens <nick@quecheelibrary.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
In the template of the export tools, the value 'marc' is set for
the 'format' variable.
It should be 'iso2709'.
There was a mess in the tools/export.pl script.
2 variables did the same thing: $format and $output_format
This patch fixes that replacing $format with $output_format
Test plan:
Try to export biblio in iso2709 and csv using the export tools and from
the checkout list.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Before applying the patch, attemping an MARC export from tools/export.pl
resulted in an error. After the patch the export works correctly.
Exports from the checkouts page also work correctly.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes tests and QA script. Also tested authority export.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Test:
1. Edit record, add 100.000 chars text to 500a
2. xml export produce the record,
3. mrc export do not produce the record, warning on log export.pl:
Record length of 111000 is larger than the MARC spec allows (99999
bytes). at /usr/share/perl5/MARC/File/USMARC.pm line 314. record
(number 139489) is invalid and therefore not exported because its
reopening generates warnings above at...
Signed-off-by: Frederic Demians <f.demians@tamil.fr>
I confirm that exporting biblio records larger than 10000 characters in
ISO2709 produces invalid files. After applying this patch, the culprit
record (too large, but also other inconsistencies preventing record
parsing with MARC::File::USMARC) is not exported anymore. A warning is
produced in Koha Apache log file. Warnings to the user on WUI would be
better, but it isn't the case yet, so it isn't a regression.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
I agree that a visible warning/result message in the staff interface
would be nice, but this works as described.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
If the sysprefs are empty, we assume that the librarian can edit all
subfields, even if s/he has the restricted permission.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
To know if the user is a superlibrarian, we have to call
C4::Context->IsSuperLibrarian
Signed-off-by: Koha Team AMU <koha.aixmarseille@gmail.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Two permission names have been changed since the first patch.
Signed-off-by: Koha Team AMU <koha.aixmarseille@gmail.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The both syspref names have been changed since the first patch.
Signed-off-by: Koha Team AMU <koha.aixmarseille@gmail.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch adds the following permissions:
- editcatalogue.limited_item_edition: Limit item modification to barcode, status and note
- editcatalogue.delete_all_items: Delete all items at once
- tools.items_limited_batchmod: Limit batch item modification to item status
The SubfieldsToAllowForLimitedEdition syspref is used to define which subfields can be edited
when the editcatalogue.limited_item_edition permission is enabled.
In the same way, the SubfieldsToAllowForLimitedBatchmod is used to define which subfields
can be edited when the tools.items_limited_batchmod permission is enabled.
Signed-off-by: Koha Team AMU <koha.aixmarseille@gmail.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This follow-up makes several changes to language and markup with one
change in behavior:
- Updated permission description to avoid the use of the term "biblio"
- Updated batch delete template to avoid the use of the term
"biblio" and to improve clarity.
- Replaced instances of terms "issue" and "reserve" with "checkout" and
"hold" respectively.
- On bibliographic record batch delete, wrap biblionumber in <label>.
- On bibliographic record batch delete, show subtitle via Keywords to
MARC mapping.
- On bibliographic record batch delete, respect BiblioDefaultView system
preference.
- In the staff client cart, move batch delete link from "Action" menu
to text link below (alongside "add to list" and "place hold"). The
buttons are actions which affect the whole Cart. The links are actions
which can be applied to selected items. I think this change makes it
more consistent with the kind of operation being performed.
To test:
- Submit a batch of bibliographic records and confirm that the
list of titles shows subtitle data as defined in Keywords to MARC
mapping. Confirm also that the title links respect your
BiblioDefaultView system preference.
- Perform a catalog search, select several titles, and add them to the
Cart. Open the Cart and test the "Batch delete" link with and without
titles selected. Test as a user who lacks batch biblio delete
permission and confirm that the link does not appear.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Work as described, no koha-qa errors
I love the rewording, we always translated 'biblio' as 'bibliographic record',
it makes a lot of sense.
Tested using direct input of biblionumber or cart, subtitle display shows
correctly, link respect preference, user without permission cant acces the
tool or links.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
- Fixes the permission on the tools page
- Fixes some capitalization
- Changes 'Reserves' to 'Holds'
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch offers a new tool for deleting records.
Biblios and authorities will can to be deleted with a simple list of
biblionumber or authid.
This feature adds:
- a new pl/tt files tools/batch_delete_records
- a new permission: tools > records_batchdel
Test plan for biblios:
1/ There are two ways to generate a list of biblionumbers:
- using the basket: do a search, add some biblio to your basket, open
the basket and click on the "Action" button > "Delete"
- generating a list from a report
2/ On the "Batch record deletion" tool verify:
- biblios with issues cannot be deleted (checkbox disabled and line in
red).
- information is correct.
- sort functions work on each columns.
- the items, reserves and issues values are correct.
3/ After clicking on the "Delete selected recors" button, verify:
- reserves, items and biblio have successful been deleted.
- if an error occurs, the tool display an error message.
Test plan for authority:
1/ Generate a list of authid using a report:
2/ On the "Batch record deletion" tool verify:
- authorities are display with the summary.
- the count usage (used in X biblios) is correct.
3/ After clicking on the "Delete selected recors" button, verify:
- The authorities have successful been deleted.
- if an error occurs, the tool display an error message.
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
$results is 1 upon success or a hash on failure.
Rather than check %$results || %error, I changed it to
$results!=1 || %error. Strangely, this works without
messy warnings. I believe this resolves the problem Katrin
mentions in comment #43.
TEST PLAN
---------
0) Make sure the system preference patronimages is set to Allow.
1) Apply all the patches
2) Login to staff client
3) Tools -> Upload patron images (it's in the bottom left)
4) Choose an image file, browse for a photo, enter a patron #.
5) Click Upload
6) Click the card number link
-- the uploaded photo should be visible on the left side of
the screen.
7) Run koha qa test tools.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Image uploaded without problems
No koha-qa errors
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
To satisfy qa tools, removing one tab somewhere..
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Sometimes our QA tools are pretty annoying, in cases like this, when its a
tab in a comment, .. I don't think we really need to hold up a patch
set for it
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Testing - this is a code-cleanup patch, so the purpose
of testing is to ensure that patron image upload functionality
still works. To test:
- Turn on the patronimages system preference
- Go to Tools | Upload patron images and import a suitable image
for a test patron.
- Bring up the test patron and verify that the image is attached.
- From the patron details page, upload a replacement image.
- Create a patron image ZIP file containing at least two images (
per the documentation of the patron image feature) and load it
via the patron image import tool.
- Verfiy that the test patrons now have images.
- Verify that tools/picture-upload.pl didn't report any errors
in the Apache error log.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Bug 11703 breaks the checkouts export feature.
To reproduce: Fill the ExportWithCsvProfile pref and go on the
circ/circulation.pl page. The export column appears, but not the export
button.
Test plan:
Go on the checkout list (circ/circulation.pl and members/moremember.pl)
and verify the export column and the export button appears.
If you click on the button, a file should be generated.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
