If ExpireReservesMaxPickUpDelay is enabled, the "holds over" tab becomes
useless. It would be nice if the "holds over" tab would display
*tomorrow's* "holds over" so the librarian can see what will be
automatically canceled over night.
Test Plan:
1) Apply this patch
2) Enable ExpireReservesMaxPickUpDelay
3) Note the "holds over" list now displays holds that will have been
waiting more than the number of days defined in ReservesMaxPickUpDelay
as of tomorrow.
Signed-off-by: Jason Burds <JBurds@dubuque.lib.ia.us>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
- thead should contain a tr
- use a correct dom for the table
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
This patch adds the ability to configrue the visible columns on the
check in screen.
To test with both patches:
1 - Check in an item
2 - Note there is no 'Date acquired' column
3 - Apply patches
4 - Note there is still no 'Date acquired' column
5 - Note that there is now a "Show / hide columns" button
6 - Verify that you can check the box and view the 'Date acquired'
column
7 - Verify that showing/hiding columns works (it will not carry over
between items due to page reload)
8 - Verify that changes from the 'Configure columns' section of
Administration hold between checkins
Sponsored by: North Central Regional Library (ncrl.org)
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
This patch adds the dateaccessioned column fro an item to the display on
returns.pl. The column is added with a CSS class for easy selection.
To test:
Check in some items
Note date accessioned is not shown
Apply patch
Refresh page
Check in some items
See the added column 'Date acquired'
Sponsored by: North Central Regional Library (ncrl.org)
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
To test, apply the patch and test deletion in the following cases. Test
both confirmation and cancel actions.
Circulation -> Check out
-> An item that is checked out by someone else
-> An item that is on hold to someone else
-> To a patron that has more than noisuescharge in fines (Allow
AllowFineOverride syspref)
-> To a patron that has reached the max amount of checkouts (Allow
AllowTooManyOverride syspref)
-> To a patron that has more than noissuescharge in fines (Allow
AllowFineOverride syspref and set noissuescharge syspref)
-> Renew -> An item that is on hold to someone else
-> To a patron that is at max renewals (Allow AllowRenewalLimitOverride syspref)
-> An item that is not checked out by anyone
-> Check in -> An item that is in transit to another branch
And look for other confirmation dialogs and check if I've missed any
Sponsored-by: Catalyst IT
EDIT: Made changes from Comment 2
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Bug 14189 added some global JavaScript to a new include file which is
included in doc-head-close.inc. Since it's included globally, there is
no reason not to move it to staff-global.js. This patch does so.
To test, apply the patch and clear your browser cache if necessary.
- Navigate to any page in the staff client which has multiple header
search tabs.
- Type something in one of the tabs.
- Switch tabs. Verify that your text was copied to the newly-displayed
form field.
Followed test plan, works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Recurring update for the about page, Koha team.
Test plan:
Check accuracy of changes with former about page (3.22 release team) and
Roles for 3.24 page on the wiki.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
When deleting a MARC framework subfield, the confirmation message is not
styled. This patch modifies the template to style the confirmation
message like similar ones.
Depends on Bug 15785 - Use Font Awesome icons in confirmation dialogs
To test, apply the patch and go to Administration -> MARC framworks.
- Click 'MARC structure' for a framework you can edit.
- Click 'subfields' for a tag you can edit.
- Click 'Delete' for a subfield you can delete. You should see a
confirmation dialog styled like other "alert" type dialogs.
- Test both canceling and confirming deletion to confirm that both
function correctly.
Revised to fix conflicts with rollback of Bug 13618
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works as expected. Revised according with bug revert 13618
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
The JavaScript embedded in the MARC modification templates template is
not dependent on template processing to such an extent that it can't
be safely moved to a separate file. This patch does so, adding
definition of a some translatable strings to the template.
Other minor changes: A couple of JSHint warnings corrected, a couple of
missing semicolons added to template markup.
To test, apply the patch and go to Tools -> MARC modification templates
- Confirm that The add/update form works normally with various actions
(Add/update,Delete,Move, etc.).
- Confirm that template switching works correctly.
- Confirm that template deletion confirmation works correctly.
- Confirm that cancelling an edit works correctly
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works as advertised
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Should be "Delete current subfield."
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
When deleting a contract in Acquisitions -> Vendor -> Contracts, the
deletion confirmation message is not styled with the standard "dialog
alert" <div>. This patch modifies the confirmation markup to match the
standard.
To test, apply the patch and go to Acquisitions -> [ a vendor] ->
Contracts
- Try deleting a contract. The confirmation box should have the standard
"dialog alert" class.
- Test the 'confirm' and 'cancel' actions and make sure both complete
correctly.
Followed test plan, works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
The batch checkout template has some markup and JavaScript problems
which need to be resolved, including:
- Mismatched <h3></h1>
- JavaScript includes which are not used
- Incorrect DataTables configuration
- Incorrect class on warning dialogs
- Incorrect terminology: Use "checkout" instead of "issue"
This patch also changes the markup and styling of batch checkout errors,
using Font Awesome icons to retain highlighting of warnings and errors
while (I hope) improving readability.
To test, apply the patch and go to batch checkout for a patron for whom
batch checkouts are enabled.
- Check out a batch of barcodes. Include items which will trigger errors
or warnings. For example: Invalid barcodes, lost items, items which
are already checked out, items which are on hold for another patron,
items which are damaged.
- When the table of items is displayed so that you can confirm the
checkout, make sure the table is sortable.
- Think about whether the style changes on warnings and errors are an
improvement.
- Try to initiate a batch checkout to a patron who is restricted. You
should see an "alert" style dialog instead of a "message" style one.
- Validate the HTML and confirm that there are no errors raised by this
template's markup.
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works as described
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
This patch will add the missing help file to the item
search fields admin page.
To test:
* Go to administration > Item search fields
* Click Help
* Confirm help is there and correct.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
The "Column visibility" text button was not translatable, now it is.
Test plan:
1/ Update the template for a given language and translate the "Column
visibility" string
2/ Go on admin/currency.pl
=> The string should be translated.
Signed-off-by: Aleisha <aleishaamohia@hotmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
This patch converts the "new frequency" link to a Bootstrap-style
toolbar button in order to maintain consistency. Also included in this
patch are some other minor markup corrections:
- A colon and space after labels
- A 'Cancel' link instead of a button.
- "Required" classes for a required field.
To test, apply the patch and go to Serials -> Manage frequencies.
- Test the "New frequency" button
- Confirm that the changes to the entry form look correct.
Followed test plan, displays as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
This patch converts the "new numbering pattern" link to a
Bootstrap-styled toolbar button for consistency with other pages in
Koha. This patch also includes minor markup corrections:
- Standardizing on the phrase "Numbering patterns" by eliminating the
occasional use of "number patterns."
- Removing mistaking closing slash on <select>
- Using standard "Cancel" link instead of a button.
- Adding a colon and space after labels.
- Fixing of "no existing patterns" message.
To test, apply the patch and go to Serials -> Numbering patterns
- Confirm that the "New numbering pattern" button looks correct and
works correctly.
- Confirm that the entry form looks correct and that the cancel link
works as expected.
Followed test plan, works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Commit 243b797dd1
Bug 15285: Update common files
Set 'B' to the default dom of Datatable constructor.
This cannot work if there is no button defined.
This patch defined an empty 'buttons' param for this constructor, DT
does not raised an error anymore when initialising.
Test plan:
Confirm that the tables on the following tables are not broken:
- circ/waitingreserves.pl
- circ/reserveratios.pl
- patron_lists/lists.pl
- virtualshelves/shelves.pl
- acqui/invoices.pl
And with datatables:
- circ/circulation.pl
- admin/currency.pl
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Add optional embedding of YouTube videos via HTML5Media.
New syspref: HTML5MediaYouTube: Embed/Don't embed videos.
Format WEBM is hardcoded as it is the only format accepted by all
modern browsers.
Test plan:
- apply patch
- catalogue a YouTube link in 856$u
- turn on HTML5MediaEnabled and HTML5MediaYouTube
- open the record in OPAC and staff client, check that the
'Play media' tab is showing and playing the video works.
Possible enhancements for followups:
- check available formats, offer quality choice
- accept official YT URL shortener
Signed-off-by: Aleisha <aleishaamohia@hotmail.com>
Works perfectly!
Signed-off-by: Nicole C Engard <nengard@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Revert "Bug 15471 [QA Followup] - Fix error causing visibility button to not display"
This reverts commit 8e997fbafc.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Currently the 'NoRenwalBefore' setting is always based on the exact
DateTime of the due date. This patch introduces a new global syspref for
choosing if 'NoRenewalBefore' should instead be calculated based on date
only. This is only relevant for loans caluclated in days. Hourly loans
are not affected.
To test:
1) Apply bug 14101, then apply this patch.
2) Run installer/data/mysql/updatedatabase.pl
3) Confirm that a new syspref NoRenewalBeforePrecision is available
in administration. It should let you choose between 'date' (default)
and 'exact time'.
Sponsored-by: Hochschule für Gesundheit (hsg), Germany
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
Added new systempreference OpacMaintenanceNotice.
When OpacMaintenance is ON the HTML contents of OpacMaintenanceNotice will
be displayed.
Enabling OpacMaintenance is all that is required to enable this preference.
If OpacMaintenanceNotice is undefined, the default (original) notice will
appear when OpacMaintenance is enabled.
To test:
- Enable OpacMaintenance systempreference
- Observe the default maintenance message when OPAC is viewed
- Edit OpacMaintenanceNotice systempreference, adding custom HTML
- Observe the custom HTML appear on the opac
- Remove OpacMaintenanceNotice (mindful of orphaned spaces etc.)
- Observe the default opac notice appears in the opac
- Disable OpacMaintenance
- Observce opac is back online
Moving code to atomic update and fixing merge conflict
NOTE: Accounted for an SQL typo and autoescaping of the template.
If someone else could test this, then I would be fine with
marking it signed off.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Test plan:
1) Make sure there is at least one field in PatronSelfRegistrationBorrowerUnwantedField.
2) Apply patch, and update database.
3) Check to make sure that the new system preference
PatronSelfModificationBorrowerUnwantedField has the same value as
PatronSelfRegistrationBorrowerUnwantedField.
4) Verify that the same fields are hidden for self-registering a new
borrower and edting a new one (both on the OPAC).
5) Change PatronSelfModificationBorrowerUnwantedField, and verify that
the two preferences correctly apply to editing vs. creating.
Signed-off-by: Michael Sauers <msauers@dospace.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
The singleBranchMode system preference does not make sense.
Either the install has only 1 library defined or several. In both case,
we can easily guess the behavior to follow.
So the idea of this patch is to replace the fetch of this syspref with a
call to count the number of libraries defined in DB.
Test plan:
1/ From a fresh Koha install, execute the DB entry to remove the pref.
2/ Define only 1 library
3/ Confirm that Koha behaves the same as before (try to change your
library, look at the facets)
4/ Create another library (or more) and reinsert the pref and set it:
insert into systempreferences (variable, value)
values('singleBranchMode', 1);
5/ Execute the DB entry
You should get a warning message.
6/ Repeat 3.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Does what it says, but will change behaviour for any Koha install that
has 2 branches defined, One circulation, and this preference set.
If that is an acceptable change, we might need to make sure this is noted well in the
release notes.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Add column visibility menu using DataTables Buttons
Add a text filter on top of each column
Also extend page width so that the large table is better centered
Depends on bug 15285
Test plan
1. Go to Holds queue page (circ/view_holdsqueue.pl)
2. Check that table sorting and filtering work well and that you can
hide each column
3. Go to Admin > Configure columns and change the settings for this
table (Circulation > view_holdsqueue > holds-table). Verify that the
settings work by going again to the Holds queue page
4. Check that filters continue to work after hiding some columns
Tested on top of 15285, works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
C4::Members::getidcity and C4::Members::GetCities simply retrieved
cities info from the cities table.
The job done in members/memberentry.pl looked really weird and complicated.
Either I have missed something, or this patch can simplify it.
The expected behavior is:
1. Create a new patron => No city selected
2. Edit an existing patron => The borrowers.city value is selected
3. Add a guarantee => The borrowers.city of the guarantor is selected
4. Edit a guarantee => The borrowers.city of the guarantee is selected
Test plan:
Confirm that the expected behaviors are the ones before and after this patch.
Signed-off-by: Natasha <tasham_8@hotmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
To test:
Go to Circulation and ensure there are no titles on hover over the links
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
To test:
1) Go to Tools -> Label Creator -> New label batch
2) Add an item
3) Click 'Remove selected items' button. Confirm message now reads "Please select at least one label to delete."
4) Click 'Remove duplicates' button. Confirm message now reads "Duplicate item(s) removed from batch number X: Y", all in bold.
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Rewording Ok for translatability purpose
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
UPDATE: Making error messages the same
To test:
1) Go to Admin -> MARC frameworks
2) Click Import next to any framework. You won't actually be overwriting or importing anything as this is only a string fix, so it can be an existing framework
3) Click the Import button without attaching any file. Confirm it says "Please select a spreadsheet (.csv, .ods, .xml) file." and that this makes sense to you
4) Attempt to attach a file that is not a .csv, .ods or .xml file. You should instantly get an error message saying "Please select a CSV (.csv), ODS (.ods) or XML (.xml) file." Confirm this shows up and makes sense to you
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Rewording Ok. Works as described
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
When viewing the checkout history for a title the branchcode is
displayed. This patch alters the template to show the library name
instead.
To test, apply the patch and locate a title in the staff client which
has been checked out at least once. From the detail page, click
"Checkout history" in the sidebar. The "Checked out from" column of the
checkout history table should show the library name instead of the
branchcode.
Works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
I only found one confirmation dialog, all the others use javascript.
To test:
Go to Tools -> Notices and Slips
Click Delete on a notice
Confirm Yes and No options still work as expected
Check Tools module in case I missed any confirm dialogs
Sponsored-by: Catalyst IT
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
To test:
1) Go to Tools -> Overdue notice/status triggers
2) Click Save changes (you don't have to change anything)
3) Confirm message now says 'Changes saved.' which is much nicer
Sponsored-by: Catalyst IT
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Otherwise the label is red and a bit agressive :)
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
The styling of the patron image upload form causes the text to be
smaller than it should be for the main body of a page. This patch
revises the form style and cleans up the markup a bit.
This patch also adds client-side validation of the form so that a file
upload is required, and a card number is required if an image file is
selected.
To test, apply the patch and go to Tools -> Upload patron images.
1. Confirm that the text in the form is the correct size.
2. With "Zip file" selected, confirm that submitting the form is blocked
and the file upload marked as required.
3. With "Image file" selected, confirm that submitting the form
with an empty card number field is blocked and the card number
field is marked as required.
4. Confirm that uploading zip files and single images still works
correctly.
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works as advertised
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
To test:
1) Notice Rotating Collections is under Patrons & Circ on tools-home.pl
2) Apply patch and refresh page
3) Notice it is now under Catalog and is in the same position it is in on the tools sidebar menu
Sponsored-by: Catalyst IT
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
To test:
1) Go to Tools -> Rotating Collections
2) Confirm actions (Add or remove items, Transfer, Edit, Delete) have moved into a drop down menu
3) Confirm all of the actions work as expected
Sponsored-by: Catalyst IT
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
A warning is raised when order amount exceed budget or fund this dialog needs to be styled with Font Awesome icons.
To test:
-Add orders to a basket
-Exceed a fund or budget
-Notice about the dialog alert
-Apply patch
-Exceed again and see the new icons
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
This patch moves the following options into a "Settings" menu inspired
by the one in the advanced editor:
- Switch to advanced editor
- Show MARC tag documentation links
- Show tags
- Change framework
To test, apply the patch and open a new or existing record in the
standard MARC editor.
- Test that the 'Switch to advanced editor' button option works.
- Test that the 'Show MARC tag documenation links' option works (and
that your choice persists across sessions).
- Test that the initial settings for 'Show tags' respects the
'hide_marc' system preference.
- Test that the 'Show tags' option works (and that your choice persists
across sessions).
- Test that framework switching works correctly and that the menu
correctly reflects your choice.
- Confirm that other toolbar functions work as expected, both in regular
editing mode and Fast Cataloging.
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works as expected.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Test Plan:
1) Apply this patch
2) Go to circulation.pl
3) Ensure you can still override renewal limits with pref enabled
4) Ensure you can not override renewal limits with pref disabled
5) Go to moremember.pl
6) Repeat steps 3-4
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
To test:
1-Checkin an item in a library other than the home branch.
2-A message will display asking to return the item to the home branch
3-You will see the phrase "Print slip )"
4-Apply patch
5-Reproduce or repeat steps 1-2 and verify the punctuation mark is
no longer displayed
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
To test:
1) Go to Tools -> Patron lists
2) If there are no lists, confirm there is a message box saying 'There are no patron lists.'
3) Create a list if you do not already have one.
4) Confirm that in the 'Actions' drop down menu next to the list, the options to 'Add patrons',
'Edit', 'Delete', and 'Print patron cards' are all there and work as expected.
Sponsored-by: Catalyst IT
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
This patch reverts some deletions made to staff-global.css in Bug 11559.
The deletions broke the appearance of the floating toolbar in system
preferences.
To test, apply the patch and clear your browser cache if necessary.
- Go to Administration -> System preferences and view a tab with enough
content to allow you to scroll and test the appearance of the floating
toolbar. Confirm that it looks correct.
- Open the advanced cataloging editor and confirm that its toolbar looks
correct.
- Open the normal cataloging editor and confirm that the floating
toolbar looks correct and works correctly.
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works as advertised. Tollbar looks correct
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
The following actions were missing in the action filter list on
cgi-bin/koha/tools/viewlog.pl:
'ADDCIRCMESSAGE'
'CHANGE PASS'
'DELCIRCMESSAGE'
'RENEW'
'Run'
To test:
- Apply patch
- Go to Tools > Logs (viewlog.pl)
- Verify that the actions appear in the list 'Actions'
- Verify that the new entries filter the list as appropriate (in
combination with Modules: All or with a meaningful selection in
list 'Modules')
Note for testing: You have to set a date in 'Display from' to get results
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Logs work as advertised, translated in bug 13474
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
"Run" could be more explicit.
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
This patch fixes the date and branch formatting of messages in patron
account display.
To verify:
Add a new message to a patron account from the 'checkouts' tab in staff,
the displayed date is not correctly formatted and the branch displays as code
instead as branch name
To test:
Apply patch, verify that the messages and branch names are properly formatted.
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works as described. The message dates in checkouts tab follow dateformat sypref
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
We should strive to keep as much JavaScript as possible out of templates
in order to keep things modular and maximize the benefits of browser
caching. This patch moves JavaScript out of the patron entry template
Two other minor edits: Missing semicolons added on the advice of JSHint.
To test, apply the patch and confirm that the following interactions
still work on the patron entry form:
1. clear_entry(): With ExtendedPatronAttributes enabled, the "Clear"
link next to any attribute form field should work to clear the field.
2. clone_entry(): With ExtendedPatronAttributes enabled and a repeatable
attribute defined, it should be possible to click the "New" link to
add another instance of that attribute's entry field.
3. update_category_code(): With ExtendedPatronAttributes enabled and an
attribute defined which is limited to a single patron category,
changing the patron category selection should correctly show or hide the
attribute entry form.
4. select_user(): When adding or editing a patron with a "Child"
category it should be possible to search for and select a guarantor
to add to the record by clicking the "Set to patron" button.
Selecting a new guarantor should change the text of the button from
"Set to patron" to "Change."
5. noEnterSubmit(): This function should be correctly preventing you
from hitting "ENTER" in any form field to submit the form.
6. guarantordelete(): When adding or editing a patron with a "Child"
category, it should be possible to clear existing guarantor
information by clicking the "Delete" button. Clicking the "Delete"
button should change the text of the adjacent button to "Set to
patron."
7. select_city(): With one or more cities defined it should be possible
to use the drop-down menu of cities to populate the city, state, zip,
and country fields.
8. Date of birth entry should have a maximum date limit of yesterday.
The drop-down menu of years should go back 100 years.
9. Client-side validation rules should be in effect, requiring that a
valid email address be entered in the primary email, secondary email,
and alternate address email fields.
10.When editing a patron, the "Add manual restriction" link should
display the form for adding a manual restriction, and clicking the
"Cancel" link should hide it.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
