Active orders are more than just not cancelled. See filter_by_active
in Koha::Acquisition::Orders. They are still in the acq process; we
still need to receive items on those orders.
When we cancel and want to delete a biblio, we should check for not
cancelled orders (broader than active orders as in Orders.pm).
Test plan:
Git grep active_orders.
Run t/db_dependent/Koha/Biblio.t
Run t/db_dependent/Koha/Acquisition/Order.t
Add two order lines in a basket referring to same biblio. Try to
cancel with delete biblio. Should not be possible.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Janusz Kaczmarek <januszop@gmail.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Current is a bit misleading here. It means the ones that are not
cancelled.
We already use the filter_out_etc naming schema. So in harmony with
that, we switch it to filter_out_cancelled.
Test plan:
Run t/db_dependent/Koha/Acquisition/Order.t
Run git grep -l '::Orders' | xargs grep filter_by_current
* All occurrences should be related to Recalls, not Orders.
Go to acqui/basket.pl. Delete a whole basket who has some active
and some cancelled lines.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Janusz Kaczmarek <januszop@gmail.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Because of the way Koha::Logger has been used to log to different categories based on the interface and caller, it can be extremely hard to log all of a particular log statement to one place.
For custom report runs, the category is plack-intranet.C4::Reports::Guided when run from the web interface, cron.C4::Reports::Guided when run from runreport.pl, and plack-intranet.C4::Auth when run from svc/report.
We should add a more standardized report run log, both with and without the full query, so that administrators can log all report runs to a centralized location. If an administrator were to need the "point of entry" for reports, it is easy to include via parameters in PatternLayout.
Test Plan:
1) Apply this patch
2) Modify your log4perl file, add the following:
log4perl.logger.reports.execute.time = INFO, REPORTTIME
log4perl.appender.REPORTTIME=Log::Log4perl::Appender::File
log4perl.appender.REPORTTIME.filename=/tmp/report-time.log
log4perl.appender.REPORTTIME.mode=append
log4perl.appender.REPORTTIME.layout=PatternLayout
log4perl.appender.REPORTTIME.layout.ConversionPattern=[%d] [%p] [%P] %m%n
log4perl.appender.REPORTTIME.utf8=1
log4perl.logger.reports.execute.query = INFO, REPORTQUERY
log4perl.appender.REPORTQUERY=Log::Log4perl::Appender::File
log4perl.appender.REPORTQUERY.filename=/tmp/report-query.log
log4perl.appender.REPORTQUERY.mode=append
log4perl.appender.REPORTQUERY.layout=PatternLayout
log4perl.appender.REPORTQUERY.layout.ConversionPattern=[%d] [%p] [%P] %m%n
log4perl.appender.REPORTQUERY.utf8=1
3) Restart all the things!
4) Run a report somehow:
CLI: ./misc/cronjobs/runreport.pl 1
API: /cgi-bin/koha/svc/report?id=1
Web: /cgi-bin/koha/reports/guided_reports.pl?reports=1&phase=Run this report
5) Note the report runs are logged to /tmp/report-time.log and /tmp/report-query.log
Signed-off-by: Brendan Lawlor <blawlor@clamsnet.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
The system preference RoutingSerials controls if the routing list
feature is available in the staff interface or not. If routing lists
are deactivated, the search option should not show.
Also updated the label to read: "Has routing list"
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Adds a search option to the advanced search in the
serials module that allows to limit search on subscriptions
with routing lists.
Test plan:
1. Apply this patch
2. Create two subscriptions, one with a routing list and one without
3. Navigate to Serials home and tick the checkbox labeled "Search routing lists only:"
4. Confirm that the only search result to appear is the subscription you added the routing list to
5. Run unit tests: prove t/db_dependent/Serials.t
Sponsored by: Bibliotheksservice-Zentrum Baden-Wuerttemberg
Signed-off-by: Christian Stelzenmüller <christian.stelzenmueller@bsz-bw.de>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Perltidied changes to make QA test tools pass.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This patch updates the 'title' and 'comment count' links to action the
same ticket detail/update modal as the 'details' button.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Paul Derscheid <paulderscheid@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
As we're already updating whitespace over almost the entire file, we may
as well go and tidy the whole thing too and add the /* keep tidy */
flag. (I checked for conflicts with existing bugs.. there's bug 20930
which will need a rebase, but it will already conflict and need a rebase
and is currently FQA)
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Removing this JS code from document.ready.
The script tag is at the end of the DOM and there is no good reasons (at
least I didn't find any) to wait for the whole document to be ready
before executing the JS code.
It made the selenium tests selenium/system_preferences_search.t to fail
randomly with:
# Failed test 'The first "Policy" section (under "Accounting") is currently expanded'
# at t/db_dependent/selenium/system_preferences_search.t line 63.
# got: undef
# expected: 'expanded'
# Looks like you failed 1 test of 6.
Because we set the class in this JS code and selenium won't wait for it
to finish before starting running the tests.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Test plan:
1) Go to reports and select "Patrons"
2) Select some filters (patron category, library,..) and run it
3) Normally you will see filters selected but with blank value like
"branch code = "
4) Apply this patch
5) Refresh
Sponsored by: BibLibre
Signed-off-by: Frédéric Demians <f.demians@tamil.fr>
Signed-off-by: Emily Lamancusa <emily.lamancusa@montgomerycountymd.gov>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This patch fixes a few things:
1) The blue dialog box now clears when navigating away from the page
2) The background job now uses skip_record_index to avoid queuing indexing jobs for every new biblio and instead queues one job at the end
3) Large files that get chunked now successfully create linked biblios if requested
4) Title matching rules have been expanded to check the package ID so that we can have duplicate titles in different packages
5) A link to the package is now included on the job report page
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This patch allows a file with additional columns to be imported. When the file is submitted, the system will enqueue the background job and send back information to the UI that certain columns have been ignored. The data will stil l import as normal but only the standard KBART columns will be parsed and imported
Signed-off-by: Clemens Tubach <clemens.tubach@kit.edu>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This patch rebases in the changes from bug 36618 to make biblio creation optional
Signed-off-by: Clemens Tubach <clemens.tubach@kit.edu>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This commit allows CSV files to be imported alongside TSV files.
It also adds some performance improvements relating to the max_allowed_packet and the matching of titles, as well as some small bugfixes and unit test changes
Test plan:
1) Enable the ERM module
2) Navigate to E-resource management > eHoldings > Local > Packages
3) Create at least one package
4) Navigate to E-resource management > eHoldings > Local > Titles
5) There should be a button for "Import from KBART file"
6) Click this button
7) Select the package that you created from the dropdown and then choose your KBART file using the "Choose file" button. I have attached some example files to the bug but feel free to use your own if you have them.
8) Click Submit
9) If your file is a valid file, a background job will be queued, if not then a warning will display showing what is incorrect in your file
10) To test the file format warning, edit your file and add a random column heading into the file e.g. test_column. When you upload it, the warning should show that an invalid column "test_column" has been detected
11) Click on the background job. (If you have uploaded a very large file, the system will chunk the file into smaller pieces and create multiple background jobs)
12) It should display a progress bar followed by a report and any error messages
13) Navigate to E-resource management > eHoldings > Local > Titles and you should see your new titles.
14) Run the unit test: prove t/db_dependent/Koha/BackgroundJob/ImportKBARTFile.t
Signed-off-by: Clemens Tubach <clemens.tubach@kit.edu>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Clemens Tubach <clemens.tubach@kit.edu>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Clemens Tubach <clemens.tubach@kit.edu>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This patch adds a background job that will import a KBART file
Sponsored-by: UKHSA
Signed-off-by: Clemens Tubach <clemens.tubach@kit.edu>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This patch adds a new component to handle the file import, a route to that component and the API client route needed to access the API
Signed-off-by: Clemens Tubach <clemens.tubach@kit.edu>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This patch adds the endpoint needed to queue an import_from_kbart_file background job
Signed-off-by: Clemens Tubach <clemens.tubach@kit.edu>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
1. Apply patch
2. reset_all (or start your testing environment in the first place)
3. Set syspref EmailPurchaseSuggestions to "email address of library"
4. Under Administration > Libraries, enter an email address for at least
one library
5. Go to "my account", and enter a Primary email and Phone number
6. Go to the Acquisitions module > Suggestions page
7. Click "New purchase suggestion", and fill in values for, at minimum:
Bibliographic information:
Title
Author
Copyright date
ISBN/ISSN
Publisher
Publication place
Collection title
Document type
Reason for suggestion
Notes
Acquisition information:
Library (set to the library you entered an email for in step 4)
Copies
8. Submit the suggestion
9. Set the suggestion status to "Rejected"
a. Check the checkbox next to the suggestion
b. Set the "Mark selected as" drop-down (below the table) to Rejected
c. Select a value for the "Reason" drop-down
d. Click the Submit button
10. Set the suggestion status to "Accepted" (as above)
11. Set the suggestion status to "Ordered" (as above)
12. Return to "my account" and open the Notices tab
--> There should be notices suggestion declined, suggestion accepted,
suggestion ordered, and (depending on settings) new suggestion*
13. Open each notice, and confirm the all information was filled in
correctly
* New suggestion will be there if you're using default KTD settings/data
and logged in as the root user. If it is not there, query the database
(by command line or SQL report) to see the generated notice text:
SELECT * FROM message_queue WHERE letter_code = 'NEW_SUGGESTION'
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
To test:
1. Apply patch
2. reset_all (or start your testing environment in the first place)
3. Enable SMS Notices
a) Find the system preference SMSSendDriver
b) Enter "Email" as the value for SMSSendDriver and save
4. Go to a patron account, and set the following messaging preferences:
Item due:
- Check SMS
- Check Email
- Leave Digests only unchecked
Advance notice
- Select 1 day in advance
- Check SMS
- Check Email
- Leave Digests only unchecked
5. Go to the checkout tab for that patron
6. Set a custom due date for today and check out an item
7. Set a custom due date for tomorrow and check out another item
8. Run the cron job to generate notices:
misc/cronjobs/advance_notices.pl -v -c
9. Open the Notices tab on that patron's account
--> The patron should have four notices:
Item due reminder (one for SMS and one for email)
Advance notice of item due (one for SMS and one for email)
10. Open each notice and confirm that all information is correct
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
To test:
1. Apply patch
2. reset_all (or start your testing environment in the first place)
3. Enable SMS Notices
a) Find the system preference SMSSendDriver
b) Enter "Email" as the value for SMSSendDriver and save
4. Go to a patron account, and set the following messaging preferences:
Hold filled:
- Check SMS
- Check Email
- Leave Digests only unchecked
5. Leave SMS number and all email address fields blank for that patron
6. Place a hold for that patron
7. Check in an item to fill the hold
8. Open the Notices tab on that patron's account
--> The patron should have a Print "hold filled" notice, since they
don't have an email address or SMS number in the system
9. Add a Primary email and SMS number to the patron account
10. Place another hold for that patron
11. Check in an item to fill the hold
12. Go back to the Notices tab on that patron's account
--> The patron should now have Email and SMS "hold filled" notices as well
13. Open each notice and confirm that all information is correct
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Test plan:
1. Apply patch
2. reset_all (or start your testing environment in the first place)
3. Enable the system preference RenewalSendNotice
4. Check an item out to a patron
5. Edit that patron:
a. Enter a value for Primary email
b. Set messaging preference to enable email notices for Item
checkout and renewal
6. Renew the checked-out item
7. Check the patron's Notices tab for the Item renewal notice, and
confirm that the notice is correct
Signed-off-by: Matt Blenkinsop <matt.blenkinsop@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
To test:
1. Apply patch
2. reset_all (or start your testing environment in the first place)
3. Find a patron and make sure their account contains values for
all of the following fields:
First name
Surname
Card number
Phone
Address
Address 2
City
Zipcode
Email
4. Place a hold for this patron, specifying a hold note
5. Check in an item to fill the hold and click "Confirm and print slip"
6. Confirm that all information on the hold slip is correct
Signed-off-by: Barbara Johnson <barbara.johnson@bedfordtx.gov>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
To test:
1. Apply patch
2. reset_all (or start your testing environment in the first place)
3. Go to "my account", and enter a Primary email
4. Under Administration > Libraries, enter an email address for at least
one library
5. Add the demo user (koha) as the owner of the Main Fund
a) Go to the Acquisitions module
b) Click on Main Fund
c) Click the Actions button at the end of Main Fund row > click Edit
d) Click "Select owner"
e) Search for "koha"
f) Click the Select button
g) Click Submit
6. Click "Suggestions" on the left side of the page, and click "New
purchase suggestion"
7. Fill in values for, at minimum:
Bibliographic information:
Title
Author
Acquisition information:
Library (set to the library you entered an email for in step 4)
Fund (set to Main Fund)
9. Submit the suggestion
10. Run the cron job to generate TO_PROCESS notification email:
misc/cronjobs/notice_unprocessed_suggestions.pl -v -c --days=0
11. Set the new suggestion to "Accepted"
a) Check the checkbox next to the new suggestion
b) Below the table, set "Mark selected as" drop-down to "Accepted"
c) Click Submit
12. Create an order from the purchase suggestion
a) Return to the Acquisitions homepage
b) Leave the Vendor field blank and click Search
c) Next to the sample basket (My Basket), click "Add to basket"
d) Click "From a suggestion"
e) Click "+ Order" next to the suggestion
f) Make sure there are values for all required item fields
g) Click "Add item"
h) Click Save
13. Close the basket and receive the order
a) Click "Close basket" and click "Yes, close"
b) Click "Receive shipments"
c) Enter a number in "Vendor invoice" and click Next
d) Check the checkbox next to "My Basket" and click "Receive
selected" button
e) Check the checkbox under "Receive?" in the Items table
f) Click Confirm
14. Return to "my account" and open the Notices tab
--> There should be (among others) notices for "A suggestion is ready to
be processed" and "Suggested purchase available"
15. Open each of the above two notices, and confirm all the information
was filled in correctly
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Test plan:
1. Reports > click Database schema link, verify it gets a 404 not foun
2. Reports > Use saved > click Database schema link, verify 404
3. Apply patch
4. Reports > click Database schema link, verify it loads as main
5. Reports > Use saved > click Database schema link, verify it loads
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Test plan:
1. Administration > search system preferences for the words database columns
2. Click the links to schema.koha-community.org, note that they 404 with
/master/ in the URL
3. Apply patch, reset_all
4. Search again, click the links, note that they load successfully with /main/
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
When sending a fee paid message to SIP2 with an unknown patron id it will respond with an empty response followed by dropping the connection to a client.
Test plan:
a) perl /usr/share/koha/bin/sip_cli_emulator.pl -a 127.0.0.1 -p 6001 -su term1 -sp term1 -l CPL --patron 2352900100046 -m fee_paid --fee-type FT --fee-amount 0.01
Output:
Trying 'fee_paid'
SEND: 3720240423 124447FT00USDBV0.01|AO|AA2352900100046|ACterm1|
Use of uninitialized value $data in concatenation (.) or string at /usr/share/koha/bin/sip_cli_emulator.pl line 355, <GEN0> chunk 1.
READ:
b) apply patch
c) perl /usr/share/koha/bin/sip_cli_emulator.pl -a 127.0.0.1 -p 6001 -su term1 -sp term1 -l CPL --patron 2352900100046 -m fee_paid --fee-type FT --fee-amount 0.01
Output:
Trying 'fee_paid'
SEND: 3720240423 125602FT00USDBV0.01|AO|AA2352900100046|ACterm1|
READ: 38N20240423 125602AO|AA2352900100046|AFInvalid patron barcode.|
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Mimic missing stuff from apache-shared-opac.conf into apache-shared-opac-plack.conf, where /search and /opac-search.pl aliases were missing.
Note that while RewriteRule applies before reverse proxy directives and works, ScriptAlias applies purely to standard cgi perl scripts, meaning it didn't apply there.
Now it's mimicked analogously to how /index.html is configured.
This patch fixes an issue where someone might have just a reverse proxy to Plack configured without native Perl scripting, where this URL would then otherwise be failing.
Signed-off-by: Pedro Amorim <pedro.amorim@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Currently main page can be accessed by:
- /
- /index.html
- /cgi-bin/koha/opac-main.pl
This specifies the canonical link for all of them to be "/", to aid search engines in assessing what's url to put in the index.
Signed-off-by: Pedro Amorim <pedro.amorim@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This adds a nice canonical URL for search engines to use. Will prevent duplicates with different URL query parameters from getting indexed separately, will also prevent search engine confusion when opac-search.pl redirects to opac-detail.pl when there's just one result.
Should result in prettier/simpler URLs in the search engines too, plus removal of constant warnings in Google Search Console and other tools.
Signed-off-by: Pedro Amorim <pedro.amorim@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This will prevent search engines from putting the search results pages into their indexes, to prevent cluttering of the search results and give better visibility to the actual bibliographic records' pages.
Note that "noindex" is separate from "nofollow", meaning that the search engine is allowed to get and process the search results page and extract ("follow") further links from it, such as links to biblio records, which is exactly what we want.
This approach is better to the sitemaps, which search engines are free to choose whether to use or not, based on multiple factors such as the size of the page. In practice for small pages Google will just not download them at all, meaning that indexing by following links around is the only way the indexer will extract any links.
Note that for this to work properly, you must NOT block the affected pages in your robots.txt file (they're not blocked by default).
Also, this patch moves "cssinclude" block in opac-results.tt inside of <head>, because in all other templates it's inside, meaning its current positioning is a small mistake I fixed while at it.
Signed-off-by: Pedro Amorim <pedro.amorim@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This removes the option to call multiple plugins in a prioritized order,
but this is not needed if there is only one plugin that uses this hook.
Sponsored-by: Karlsruhe Institute of Technology (KIT)
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This allows the plugin to read/change the domain.
Sponsored-by: Karlsruhe Institute of Technology (KIT)
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This plugin hook allows to change patron data or define the patron
based on the authenticated user.
To test: Run
prove t/db_dependent/Koha/Auth/Client.t
Sponsored-by: Karlsruhe Institute of Technology (KIT)
Signed-off-by: Thomas Klausner <domm@plix.at>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This patch moves the header set into Koha::Email->create and passes the
template_id in a few additional locations to ensure we catch more cases.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
It can be useful to know exactly what template was used to generate a notice. To further this end, it would be useful be able to send the letter id as part of any emails sent out if there is a letter template associated with the message.
Test Plan:
1) Apply this patch
2) Restart all the things!
3) Generate an email notice like a checkout notice
4) Inspect the email headers, note the new X-Koha-Template-Id and
X-Koha-Message-Id headers!
Signed-off-by: Sam Lau <samalau@gmail.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
When using the authority editor in Firefox, it is not possible to set
the cursor or select text from the text field.
This patch mimics the corrections made in bug 35425 for biblio editor.
Test plan:
==========
1. Start editing an existing authority record and try to put the cursor
with the mouse in the middle of the content of any subfield or to
select text with the mouse. It should not be possilbe.
2. Apply the patch (reload plack etc.).
3. Repeat p. 1 - everything should work as expected.
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Pedro Amorim <pedro.amorim@ptfs-europe.com>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
The existing code for "Holds to place (count)" sets the input field's
maxlength to remaining_holds_for_record, which does not do what we want
and makes the field unusable when the circulation rules allow unlimited
holds. Better to remove it.
Signed-off-by: Emily Lamancusa <emily.lamancusa@montgomerycountymd.gov>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
To test:
1 set Holds Per Record to Unlimited
2 confirm hold placement interface does not include "Holds to place (count)"
3 apply patch, restart all
4 reload hold placement interface, confirm it does include "Holds to place (count)"
5 set Holds Per Record to 2
6 confirm Holds to place shows when placing a first hold for a patron, but not when placing a second
7 set Holds Per Record to 1
8 confirm Holds to Place does not show
9 sign off and eat a nice snack
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Emily Lamancusa <emily.lamancusa@montgomerycountymd.gov>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
When trying to open the authority editor with authid=<invalid_authid>
(e.g. a deleted authid) Koha explodes with a message:
Can't call method "authtypecode" on an undefined value at
/kohadevbox/koha/authorities/authorities.pl line 556
This this because authtypecode method is called on the result of
->find without verifying that it was succesful.
Test plan:
==========
1. Try to edit an auth rec. giving as a authid (in URL) a non-existing
authid, e.g. in ktd, with standard ktd test data:
http://your_ktd:8081/cgi-bin/koha/authorities/authorities.pl?authid=100000
Koha should explode with the message:
Can't call method "authtypecode" on an undefined value at
/kohadevbox/koha/authorities/authorities.pl line 556
2. Apply the patch; restart_all.
3. Repeat p. 1. You should get the 404 error page.
Sponsored-by: Ignatianum University in Cracow
Signed-off-by: Roman Dolny <roman.dolny@jezuici.pl>
Signed-off-by: Emily Lamancusa <emily.lamancusa@montgomerycountymd.gov>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
The advanced editor currently saves which Z39.50 servers are selected
in local storage using the index in the sorted array of servers, and
then misreads them back as though they were server_ids. We want them to
be server_ids, since that's immutable and the index can change with
changes in rank or server name.
We use the data-server-id property in the HTML more often as a server_id
than as the index that's currently stored there, so this patches
switches it back to be the server_id, and in the one place we would use
the index, instead uses Array.find to just get the server object instead
of referencing it by index.
Test plan:
1. Set the preference EnableAdvancedCatalogingEditor to enable
2. Administration - Z39.50 Servers, for NATIONAL LIBRARY OF FRANCE
uncheck "Preselected"
3. To be sure you don't have confusing saved preferences, open
Firefox's Developer Tools, in the Storage tab open Local Storage and
select your URL
4. In the row for cateditor_preferences_{your Koha user id}, if there
are any values for selected_search_targets, delete them so you
have "selected_search_targets":{}
5. Open the advanced editor, and click "Advanced »" in the search box
6. You should have Local catalog unchecked, LIBRARY OF CONGRESS checked
because it is preselected, and NATIONAL LIBRARY OF FRANCE unchecked
7. Toggle each checkbox so Local catalog and France are selected, and
LoC is unselected.
8. In a new broser tab, open the advanced editor, and click "Advanced »"
9. You will see Local catalog unchecked, LoC checked, and France
unchecked.
That's the bug.
10. Apply patch, open the advanced editor in a new tab, click "Advanced »"
11. Toggle the checkboxes so Local catalog and France are selected, and
LoC is not selected.
12. Open the advanced editor in another new tab, click "Advanced »"
13. You should see what you just set, Local catalog and France checked,
and LoC unchecked, That's the correct behavior.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
