* C4::Reserves::_FixPriority
- The previous code checked the cancellationdate. If think you never pass
in it with bad parameters, but in order to be sure I added the check on
this value.
- The reservedates array was never used.
* circ/circulation.tt
There was a bug: it was not possible to remove an hold from the
circulation page. Passing reserve_id fixes the issue.
* C4::Reserves::GetReserveId
This subroutine did not have a unit test.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch switches from using a combination of
biblionumber/borrowernumber to using reserve_id where possible.
Test Plan:
1) Apply patch
2) Run t/db_dependent/Holds.t
Signed-off-by: Maxime Pelletier <maxime.pelletier@libeo.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Try before the patch:
prove t/db_dependent/Acquisition.t
And after, it should produce:
t/db_dependent/Acquisition.t .. ok
All tests successful.
Files=1, Tests=41, 2 wallclock secs ( 0.03 usr 0.00 sys + 0.42 cusr
0.02 csys = 0.47 CPU)
Result: PASS
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Tests pass and the bookseller is deleted.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
All tests pass.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Try before the patch:
prove t/db_dependent/Acquisition/OrderFromSubscription.t
And after, it should produce:
t/db_dependent/Acquisition/OrderFromSubscription.t .. ok
All tests successful.
Files=1, Tests=12, 2 wallclock secs ( 0.02 usr 0.00 sys + 0.46 cusr
0.02 csys = 0.50 CPU)
Result: PASS
And some warnings...
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes tests.
Assumes Dateformat is set to US dates as in the sample data.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Before this patch, the queries in VirtualShelves.t were committed in the
database and have to be removed at the end.
This patch wraps tests in a database transaction.
Test plan:
prove t/db_dependent/VirtualShelves.t
VirtualShelves.t .. ok
All tests successful.
Files=1, Tests=72, 1 wallclock secs ( 0.06 usr 0.00 sys + 0.72 cusr 0.06 csys = 0.84 CPU)
Result: PASS
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
All tests pass.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Before this patch, the queries in GetOrdersByBiblionumber.t were commited in the database and have to be removed at the end.
This patch wraps tests in a database transaction.
Test Plan :
prove t/db_dependent/Acquisition/GetOrdersByBiblionumber.t
t/db_dependent/Acquisition/GetOrdersByBiblionumber.t .. ok
All tests successful.
Files=1, Tests=3, 0 wallclock secs ( 0.02 usr 0.01 sys + 0.37 cusr 0.05 csys = 0.45 CPU)
Result: PASS
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Tests pass.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Since the patron barcode is nullable, and since the tests using
the test patron don't care what the barcode is, don't set it. This
avoids the tests failing if the test database happens to already
have a patron record with the hard-coded barcode that used
to be supplied.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
The DB field aqorders.biblioitemnumber seems to be unused except to get
the itype on the spent.pl page.
This information can be retrieved uising another SQL join.
Test plan:
Try a complete workflow in the acquisition module: create an order,
receive it, play with the syspref AcqCreateItem.
Check that no regression is found and that the data for existing
orders don't change.
Signed-off-by: Mathieu Saby <mathieu.saby@univ-rennes2.fr>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
To test, in a test database that has the sample branches
loaded, run
prove -v t/db_dependent/Koha_template_plugin_KohaBranchName.t
Note that this includes regression tests for the issues
reported in bug 10494; these won't pass without applying
the patch that fixes them.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Most important: Does no longer delete all shelves!
Checks if there are ten borrowers for testing. But even works without them :)
When creating or modifying lists, takes name clashes into consideration.
Small change to _CheckShelfName in VirtualShelves module. Making it possible to
check a name for a list whose owner has been set to NULL. Note that a test
like field=? with undef for placeholder will not work in MySql.
Test plan:
How do you test a test? Well, you could run it on various databases..
But for real hacking, you could also add some debug lines.
I tested this by forcing 10 undefs in @borrowernumbers.
And by overwriting the return value of randomname with an existing name.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
After applying this patch and the patch submitted in bug 10495, you can
run prove t/db_dependent/HoldsQueue.t and admire that all tests pass.
This patch creates a borrower and uses Koha routines instead of directly
updating the database.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
t/db_dependent/HoldsQueue.t assumed, but did not check,
that the AutomaticItemReturns system preference was off
at the beginning of the test un. This patch makes sure
that that assumption is met.
To test:
[1] Make sure that at least one item is on loan (this is
another assumption that the test case makes, one
that should be corrected with the work proposed
for bug 10336.
[2] Turn the AutomaticItemReturn system preference on.
[3] Run the test:
prove -v t/db_dependent/HoldsQueue.t
[4] Tests 4 and 6 should fail.
[5] Apply the patch.
[6] Run the test case again; this time, all tests should pass.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
t/db_dependent/needs_user_input/Auth.t and
t/db_dependent/needs_user_input/Auth_with_ldap.t seem not really useful.
If I refer to the git history, it seems that they are antiquated tests.
The first one is not compilable:
perl -wc t/db_dependent/needs_user_input/Auth.t
Can't locate override_context_prefs.pm
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
- Wrap tests in a database transaction; that
way, no special cleanup code is required
- Use AddItem rather than AddItemFromMarc to create
test items; there's no need to build in a
dependence on any particular MARC flavor or
framework in our test cases (except, of course,
for test cases that are explicitly exercising
code that involves the frameworks).
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
prove t/db_dependent/CourseReserves.t
t/db_dependent/CourseReserves.t .. ok
All tests successful.
Files=1, Tests=20, 2 wallclock secs ( 0.02 usr 0.00 sys + 0.43 cusr
0.03 csys = 0.48 CPU)
Result: PASS
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Without correct data, test fails prior to patch, passes no matter what
after patch is applied.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Removes the following exported but unused subs from Overdues.pm:
CreateItemAccountLine
UpdateAccountLines
CheckAccountLineLevelInfo
CheckAccountLineItemInfo
CheckExistantNotifyid
GetNextIdNotify
GetNotifyId
ReplacementCost
ReplacementCost2
GetOverdueDelays
GetOverduerules
Test plan:
It is hard to test the removal of something that was not used :) Try this:
Do a recursive grep on these routine names in the Koha codebase.
Compile some scripts that use the Overdues module.
And just to be sure we do not break something:
Go to Circulation: Do a checkout, checkin, place and confirm a hold.
Go to Patrons: Goto Check out. Goto Fines.
Run the command line scripts: fines.pl and overdue_notices.pl.
Go to opac-user.pl.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Are not used. Contain several FIXMEs.
Removing them makes life easier.
Test plan:
Actually, you cannot test this.
But for confidence: do a Z3950 search in cataloguing and acquisition.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Put the 10 biblionumbers in a list
Add a FIXME for deleting shelves
Do temporary repair on duplicate name test (Followup via report 10386)
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Test Plan:
1) Enable IndependantBranches
2) Apply this patch
3) Run updatedatabase.pl
4) Verify that the system preference still functions correctly
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Renamed that routine to GetItemCourseReservesInfo in
order to avoid any potential confusion with reserves
qua hold requests.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
New modules should not export any symbols by default
without a very good reason.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Adds a course reserves system for academic libraries.
The course reserves system allows libraries to create courses
and put items on reserves for those courses.
Each item with at least one reserve can have some of its attributes
modified while it is on reserve for at least one active course.
These attributes include item type, collection code, shelving location,
and holding library. If there are no active courses with this item
on reserve, it's attributes will revert to the original attributes
it had before going on reserve.
Test Plan:
1) Create new authorised value categories DEPARTMENT and TERM
2) Create a new course, add instructors to that course.
3) Reserve items for that course, verify item attributes have changed.
4) Disable course, verify item attributes have reverted.
5) Enable course again, verify item attributes again.
6) Delete course, verify item attributes again.
7) Create two new courses, add the same item(s) to both courses.
8) Disable one course, verify item attributes have not reverted.
9) Disable both courses, verify item attributes have reverted.
10) Enable one course, verify item attributes are again set to the
new values.
11) Edit reserve item attributes, verify.
12) Disable all courses, edit reserve item attributes, verify
the item itself still has its original attributes, verify
the reserve item attributes have been updated.
13) Verify the ability to remove instructors from a course.
14) Verify new permissions, top level coursereserves, with
subpermissions add_reserves and delete_reserves.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Corinne Bulac <corinne.hayet@bulac.fr>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
http://bugs.koha-community.org/show_bug.cgi?id=8125
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
prove t/db_dependent/Acquisition/GetOrdersByBiblionumber.t
Signed-off-by:Mathieu Saby <mathieu.saby@univ-rennes2.fr>
I made 2 tests :
$prove -v t/db_dependent/Acquisition/GetOrdersByBiblionumber.t
and
$prove -v t/db_dependent/Acquisition.t
The 2 tests are successful.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
All tests and QA script pass.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Revised patch according to QA comments. No more dependent from bz 9780.
At present, merging records breaks the link order/record, except
if an item of the deleted record is used in the order.
This is a serious issue for libraries creating items on receipt.
This patch moves existing orders from deleted record to destination record.
It creates a new function Acquisitions::GetOrdersByBiblionumber,
that could be used by other patches later.
To test :
Check the problem :
1. Set syspref AcqCreateItem = Create an item when receiving an order
1. Create a basket with one order
2. Put the record used by this order in a list
3. Put an other record in the list
4. Merge the 2 records, keeping as a reference the record NOT used in the order
5. In the order, you will see for that order "Deleted bibliographic information..."
6. Apply the patch
7. Repeat steps 1-4
8. In the order, you will see the title/author of the kept record.
9. Set syspref AcqCreateItem = Create an item when placing an order
10. Repeat steps 1-4 (an item will be created)
11. In the oreder, you will see the title/author of the kept record
(it is already the case at present. the patch should not alter this behavior)
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Test plan, test suite and QA script pass.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This new unit test confirms that importing records via the Stage
MARC import tool still works by connecting to a Koha instance and
importing a record then reverting the import, checking at each step
of the way that everything is as it should be.
To test:
1. Install Test::WWW::Mechanize
> sudo apt-get install libtest-www-mechanize-perl
2. Set environment variables to reflect your Koha instance:
> export KOHA_USER=kohaadmin
> export KOHA_PASS=katikoan
> export KOHA_INTRANET_URL=http://localhost:8080
> export KOHA_OPAC_URL=http://localhost
3. Run the test:
> prove t/db_dependent/www/batch.t
This updated patch now handles both MARC21 and UNIMARC installations.
Signed-off-by: Magnus Enger <magnus@enger.priv.no>
All tests pass with marcflavour = MARC21 and NORMARC. Test #15 fails
when marcflavour = UNIMARC, but from what I can see, that is because
I'm testing on a MARC21 setup, missing the UNIMARC frameworks etc.
I'm signing off - QA folks, please ask for a proper UNIMARC signoff
if you feel it is needed.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Amended patch: Load the POSIX module (for the floor routine).
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
A construction that was a syntax error in older versions of Perl was
causing problems for jenkins. This patch fixes it.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
C4::Reports::Guided requires a koha-conf.xml file to be in place in
order to load. This means that any test which uses it has to go in
t/db_dependent
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
New unit tests for 4 routines:
- C4::Serials::subscriptionCurrentlyOnOrder
- C4::Acquisition::GetLastOrderNotReceivedFromSubscriptionid
- C4::Acquisition::GetLastOrderReceivedFromSubscriptionid
- C4::Budgets::GetBudgetName
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Fixed a tab in t/db/dependent/Budgets.t
All tests, new db_dependent tests and QA script pass. Thx Jonathan!
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This patch adds some unit tests for CalcDateDue and GetLoanLength
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
All tests and QA script pass.
Tests done:
- Checked update works correctly for existing circulation rules.
- Adding, deleting and overwriting circulation rules works.
- Renewals work for different circulation rules and changes
to the holiday calendar.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Renew an issue for a number of days (filled in the issuing rules).
Test if rules work for any i[item]types and if there is no regression.
- new column issuingrules.renewalperiod
- remove all occurrences of an already removed syspref (globalDueDate)
- remove an unused routine (Overdues::GetIssuingRules)
How it works:
- On existing installations, the issuingrules.renewalperiod =
issuingrules.loanlength. So the behaviour is the same before and after
this patch.
- when you add a rule, you can choose a renewal period (the unit value
is the issuingrules.unit). So you can have a renewal period in hours
or days.
- The default value for the renewal period is 21 days (same as
loanlength)
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Test comments on second patch.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
All tests and qa script pass.
Tests done:
- created a .koc file with return, issue and fine payments.
- queued that file into Koha
- created some transactions using the Firefox plugin
- queued that into Koha
- processed files and checked outcome was ok
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
* Add "Plugins disabled" screen instead of error
* Allow plugins to return a value, add a test run that checks the return value
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Tests Ok
~/kohaclone$ perl t/db_dependent/Plugins.t
1..15
ok 1 - use Koha::Plugins;
ok 2 - use Koha::Plugins::Handler;
ok 3 - use Koha::Plugins::Base;
ok 4 - use Koha::Plugin::Test;
ok 5 - Test can_load
ok 6 - Test plugin class isa Koha::Plugin::Test
ok 7 - Test plugin parent class isa Koha::Plugins::Base
ok 8 - Test plugin can report
ok 9 - Test plugin can tool
ok 10 - Test plugin can configure
ok 11 - Test plugin can install
ok 12 - Test plugin can install
ok 13 - Test $plugin->get_metadata()
ok 14 - Test $plugin->get_qualified_table_name()
ok 15 - Test $plugin->get_plugin_http_path()
(and all others as well)
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This patch removes 'insecure' system preference.
Also removes remaining code that make use of
the preference. It's broken anyway.
Only remains a reference in POD of C4/Boolean.pm
To test:
1) If you like, enable 'insecure' syspref. Broken system.
WARN: be prepared to revert value in database.
2) Apply the patch
3) Run updatedatabase.pl
4) Check that Staff login proceeds as usual.
5) Check that 'insecure' syspref is no more.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Amended patch: Remove 2 occurrences of insecure (in comment only)
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Removed NoZebra vestiges. This comprises several code blocks that depend on the NoZebra syspref and NZ related functions/methods.
C4::Biblio->
GetNoZebraIndexes
_DelBiblioNoZebra
_AddBiblioNoZebra
C4::Search->
NZgetRecords
NZanalyse
NZoperatorAND
NZoperatorOR
NZoperatorNOT
NZorder
C4::Installer->
set_indexing_engine
Sponsored-by: Universidad Nacional de Córdoba
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
With the inclusion of this patch, all searches will (try) to use
QueryParser for handling queries for both the bibliographic and authority
databases if UseQueryParser is enabled. If QueryParser is unavailable,
UseQueryParser is disabled, or the search uses CCL indexes, the old
search code will be used.
To test:
1) Apply patch.
2) Run the unit test with `prove t/QueryParser.t`
3) Enable the UseQueryParser syspref.
4) Try searches that should return results in the following places:
* OPAC (simple search)
* OPAC (advanced search)
* OPAC (authorities)
* Staff client (header search)
* Staff client (advanced search)
* Staff client (cataloging search)
* Staff client (authorities)
* Staff client (importing a batch using a match point)
* Staff client (searching for an item for adding to a label)
* Staff client (acquisitions)
* Staff client (searching for a record to create a serial)
* ANYWHERE ELSE I HAVE FORGOTTEN
5) Disable the UseQueryParser syspref. Repeat at least some of the
searches you did above.
6) If all searches worked, sign off.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Elliott Davis <elliott@bywatersolions.com>
Searching still works as expected for variuos places.
QueryParser syspref seemed to be enabled by default
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Prior to this patch, C4::VirtualShelves::Page did not make sure that
the itemtype images that it chose when displaying itemtype images for
biblio-level itemtypes were for the correct interface, so
even on the OPAC the Intranet icons were requested. On standard
installations, intranet-tmpl is not available to the OPAC.
To test:
1) Set noItemTypeImages to "Show" and item-level_items to "biblio record"
2) Create a list and add an item with the default item type (942$c in
MARC21) set to something with an itemtype image associated with it.
3) View the list in the OPAC.
4) If you are an a standard install, the itemtype image will be a broken
link. If on a dev install, you can confirm with Firebug or the like
that the image is pulled from /intranet-tmpl.
5) Apply patch.
6) Run `prove t/db_dependent/Koha.t` to confirm that the behavior of the
routine used to retrieve the image URL is correct. (Note that you
must have an item type with the code 'BK')
7) Refresh the list, noting that the display is now correct/the image is
pulled from opac-tmpl.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
It works as expected. All tests in Koha.t passed.
Signed-off-by: Mason James <mtj@kohaaloha.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Passed-QA-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Added RentalsInNoissueCharges and ManInvlsInNoissueCharges sys prefs
Created C4::Members::cwGetMemberAccountBallance()
* A wrapper for GetMemberAccountRecords that gives info on non-issue and
other charges
* Other charges are:
'Res'
'Rent' if RentalsInNoissueCharges is Mo
authorised_values MANUAL_INV if ManInvlsInNoissueCharges is No
C4::Members::GetMemberAccountRecords() changes:
* Dropped input param $date, it is not used
Use split charges in C4::Circulation::CanBookBeIssued() and
C4::Members::patronflags(). That way only fines decide whether an item
can be issued, and not other non-fine charges
Signed-off-by: Marc Veron <veron@veron.ch>
Rebased (updatedatabase.pl)
ManInvInNoissueCharges and RentalsInNoissueCharges ar both included by default (= behaviour as before)
All variants tested: Both included, none included, manual invoice included, rentals included.
Works fine, blocks/does not blok as appropirate, messages appear as expected.
[Oct 12, 2012 marcelr:] Amended for updatedatabase.pl
Signed-off-by: M. de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Adjusts calling conventions to use hashrefs and eliminate redundant
procedural/OO mixed code.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Check whether a given update should be run when passed the proposed
version number. The update will always be run if the proposed version
is greater than the current database version and less than or equal to
the version returned by C4::Context->final_linear_version (initially set
to be equal to the version in kohaversion.pl). The update is also run if
the version contains XXX, though this behavior will be changed following
the adoption of non-linear updates as implemented in bug 7167.
To test:
1) Make sure that the first example database update added by this patch
in installer/data/mysql/updatedatabase.pl has a version number one
greater than the version of Koha you have installed.
2) Set the Version syspref back one version behind your current version.
3) Navigate to the main page of the staff client, and log in to the
installer.
4) Confirm that the update page claims to have rerun the previous update
and has displayed the log message:
"Upgrade to 3.11.00.XXX done (Bug 9191: You should see this)"
but not the log message:
"Upgrade to [version number] done (Bug 9191: You shouldn't see this)"
Note: the sample database revisions will be removed by the RM before
this patch is pushed to master.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
works great
Signed-off-by: Elliott Davis <elliott@test.bywatersolutions.com>
Works as expected. Test plan is great. Code looks to be adherent to standards.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
[This patch was split out from tcohen's excellent patches for bug 8519
--jcamins 2012/10/31]
Added a new koha-index-daemon-ctl.sh script that uses the
'koha-index-daemon' provided by Koha::Contrib::Tamil (install via CPAN)
to process the indexing queue ('zebraqueue' for now, 'indexqueue' in the
future I guess :-P).
This script could be easily modified in the future for using another
index queue processing script (a more abstract indexing script for both Solr
and Zebra, etc). I removed all zebra-ish stuff from it.
Documentation patches will be provided as followups, once Mark Tompsett's
docs are pushed to avoid continous rebasing.
Tested to work on an up-to-date Ubuntu 12.04.
Sponsored-by: Universidad Nacional de Córdoba
Signed-off-by: wajasu <matted-34813@mypacks.net>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Because C4::Context uses an in-memory hash for caching sysprefs,
changing a syspref under a multi-threaded persistent environment
requires a server restart. This patch makes it possible disable
the syspref cache.
To test:
1) If you are using a multi-threaded persistent server (Starman, etc.),
change a syspref and note that the effects of the syspref change may
or may not be visible on any given request before applying this patch.
You will need to choose a syspref with obvious effects that can be
seen by simply refreshing the page. I recommend enabling or
disabling additional languages in the OPAC, since you can refresh the
page a dozen times and reasonably expect to see the new behavior you
set only 1/n of the time.
2) Apply patch.
3) Add "C4::Context->disable_syspref_cache();" to your koha.psgi file
4) Repeat step 1, noting that you never see the stale behavior.
5) Run test at t/db_dependent/Context.t.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
All tests passed.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
[This patch was split out from tcohen's excellent patches for bug 8519
--jcamins]
It removes the obsolete zebraqueue_daemon.pl and koha-zebraqueue-ctl.sh
obsolete scripts too.
Several files are modified to address te removal/addition of these files.
I didn't run the install procedure as I was working on my laptop with a dev
setup, just set the symlinks. Now fixed things as proposed by wajasu
on comment #4. Any other suggestion please let me know.
Tested to work on an up-to-date Ubuntu 12.04.
Asked by wajasu, remove remaining obsolete zebraqueue stuff.
Sponsored-by: Universidad Nacional de Córdoba
Signed-off-by: wajasu <matted-34813@mypacks.net>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Passed-QA-by: Mason James <mtj@kohaaloha.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
The test was moved since the original patch was written, making the
revised test fail. This patch corrects the mocked template patch so that
the test will pass.
To test:
1) Before applying patch, run
`prove t/db_dependent/SuggestionEngine_ExplodedTerms.t`
2) Note that it fails.
3) Apply patch.
4) Run `prove t/db_dependent/SuggestionEngine_ExplodedTerms.t`
5) Note that it passes.
6) Celebrate.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Even though there is no need for anything stored in the database for the
test, C4::Templates requires the database and a koha-conf.xml. The
solution is to mock all database- and koha-conf-using routines.
To test:
1) Stop MySQL
2) Unset KOHA_CONF
3) Run test
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Works better now, creats biblio records, and cleans up after itself as
well.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
This fixes the display of different sized words for differently popular
tags. It is a bit of a refactor of that part of the system, moving
logic to more sensible places (and removing an unused method on the
way.)
Note that it isn't an attempt to reproduce what was there previously,
just to do something similar, and in an easier to change fashion.
Sponsored-By: New Zealand Educational Institute
Signed-off-by: Marc Veron <veron@veron.ch>
Works as expected.
This test file is meant to be used with the sample database
with a minimum of the sample libraries and sample holidays installed.
http://bugs.koha-community.org/show_bug.cgi?id=8110
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Pierre Angot <tredok.pierre@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Larry Baerveldt <larry@bywatersolutions.com>
Signed-off-by: Joy Nelson <joy@bywatersolutions.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
When working with hierarchical subject headings, it is sometimes helpful
to do a search for all records with a specific subject, plus
broader/narrower/related subjects. This patch adds support for these
"exploded" subject searches to Koha.
To test:
1) Make sure you have a bunch of hierarchical subjects. I created
geographical subjects for "Arizona," "United States," and "Phoenix,"
and linked them together using 551s, and made sure I had a half
dozen records linking to each (but not all to all three).
2) Do a search for su-br:Arizona (or choose "Subject and broader terms"
on the advanced search screen with "more options" displayed), and
check that you get the records with the subject "Arizona" and the
records with the subject "United States"
3) Do a search for su-na:Arizona (or choose "Subject and narrower terms"
on the advanced search screen with "more options" displayed), and
check that you get the records with the subject "Arizona" and the
records with the subject "Phoenix"
4) Do a search for su-rl:Arizona (or choose "Subject and related terms"
on the advanced search screen with "more options" displayed), and
check that you get the records with the subject "Arizona," the
records with the subject "United States," and the records with the
subject "Phoenix"
5) Ensure that other searches still work (keyword, subject, ccl,
whatever)
6) Sign off
Technical details:
This patch adds a shim in front of C4::Search::buildQuery in order to
preprocess the query and call the _handle_exploding_search callback.
This shim will allow us to gradually offload query parsing to a new
query parser module.
Signed-off-by: wajasu <matted-34813@mypacks.net>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
This patch adds the Koha::Indexer::RecordNormalizer and
Koha::Indexer::MARC::RecordNormalizer::EmbedSeeFromHeadings packages
to enable the inclusion of alternate forms of headings in bibliographic
searches. When the new syspref IncludeSeeFromInSearches is turned on
(default is off) rebuild_zebra.pl will insert see from headings from
authority records into bibliographic records when indexing, so that a
search on an obsolete term will turn up relevant records.
To test:
1) Enable IncludeSeeFromInSearches
2) Add a heading that has an alternate form to a record (for example,
"Cooking" has the alternate form "Cookery," if you have authority
records from LC)
3) Index the zebraqueue (or reindex if you haven't indexed your system
yet)
4) Confirm that if you search for "Cookery" you get the record you
just modified
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Rebased on master 5 August 2012
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Rebased on master 11 September 2012
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Also checked:
- Verified database update works correctly
- Checked system preference and its description
- Checked staff/opac detail pages with feature on/off
- Checked staff/opac search facets
- Downloaded and tested records in various formats
- Tried different searches for 'see from' entries of authorities
- Ran all unit tests
No problems found.
The Zebra test uses Unix-domain sockets, which won't work if
Koha is being installed or tested from an NFS- or SSHFS-mounted
clone. Therefore, create (and clenaup) a temporary directory on
(hopefully) a normal filesytem to run the test.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: wajasu <matted-34813@mypacks.net>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This fixes failures of the test cases to run for me
on Perl 5.10.1 using prove -v t/db_dependent/Search.t
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: wajasu <matted-34813@mypacks.net>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch adds a unit test for C4::Search in t/db_dependent. In order
to test the functioning of the Zebra search, this patch actually includes
an entire Zebra sandbox, and pre-indexed files, which are stored in
t/db_dependent/data (the configuration files are generated on the fly).
This test depends on Test::Warn, Test::MockModule, and DBD::Mock.
To test:
1) Run the test. There should be no failures, and no warnings.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: wajasu <matted-34813@mypacks.net>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Create transport_cost table, added UseTransportCostMatrix syspref.
transport_cost table contains branch to branch transfer
costs. These are used for filling inter-branch hold transfers.
Moved GetHoldsQueueItems() from .pl to HoldsQueue.pm
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
If you had a report query that had a subquery in the fields list, and
that subquery had a LIMIT specifier, then it would be removed which
could break your query. This patch prevents this case from breaking by
ensuring that only a LIMIT that follows the last WHERE in the query is
removed.
If you don't have a WHERE, then it will behave like it always
did, removing all the cases of LIMIT (which would still break a subquery
but this is a) more rare, and b) would require more intelligent parsing
to deal with.
Also adds test cases and function documentation.
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
Tested with this report:
select biblionumber, (select itemnumber from items where items.biblionumber=biblio.biblionumber LIMIT 1) from biblio where biblionumber<1000;
and it worked like a charm
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Implement auto-incrementing EAN-13 barcodes
To make this work, C4::Barcodes::next was modified to call process_tail with
new incremented value so that process_tail can generate correct checksum.
Since process_tail is currenlty not used by any barcodes, this change is safe.
C4::Barcodes is used by addbiblio.pl when adding multiple records, while value_builder
is used in all other cases.
Test scenario:
1. prove t/Barcodes_EAN13.t
2. KOHA_CONF=/etc/koha/sites/fer/koha-conf.xml prove t/db_dependent/Barcodes.t
this will check C4::Barcode implementataion
3. in systempreference change autoBarcode to incremental EAN-13 barcode
4. edit two items of any biblio assigning barcodes and verify that numbers
are increasing. Have in mind that last digit is check digit, and it
doesn't increment, but is calculated from barcode itself. Example with
checksum in brackets: 000000086275[2], 000000086276[9], 000000086277[6]
5. Add Item and verify that it gets assigned next barcode
6. Add & Duplicate item and verify barcode increase
7. Add Multiple Copies and verify that barcode increase for each copy
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Adds a non-test mode (--showsql option) that displays the missing
sysprefs as sql inserts. Some sysprefs were missed from the syspref
file due to extra spaces in the insert : fixed. The test now checks if
there are at least as many sysprefs in the database as in the syspref
file (instead of checking for the exact number)
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Cherrypicked from BibLibre master, rebased onto current master, and
corrected typos, 2012-07-03
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This patch adds t/db_dependent/00-strict.pl which tests that all Perl
scripts compile. I chose to use Test::Strict so that in the future we
can also have the test check that "use strict" and "use warnings" are
enabled.
To test:
1. Run t/db_dependent/00-strict.pl.
2. Run around waving your arms in the air that we have a couple of
scripts that don't compile.
3. Actually, that's about it. You could test my patch for bug 8384 next.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Moved test to t/db_dependent
Signed-off-by: Frédéric Demians <f.demians@tamil.fr>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
modified: Koha.t
$ prove -v ./Koha.t
1..5
ok 1 - use C4::Koha;
ok 2 - use C4::Members;
1..6
ok 1 - Insert data in database
ok 2 - GetAuthorisedValueByCode
ok 3 - GetKohaImageurlFromAuthorisedValues
ok 4 - lost and paid works
ok 5 - Child area works
ok 6 - Withdrawn works
ok 3 - Authorized Values Tests
1..4
ok 1 - C4::Koha->can('GetDailyQuote')
ok 2 - Got a quote based on id.
ok 3 - Got a random quote.
ok 4 - Got a quote based on today's date.
ok 4 - Daily Quotes Test
1..7
ok 1 - slashifyDate
ok 2 - xml_escape() returns empty string on undef input
ok 3 - xml_escape() works as expected
ok 4 - ... and does not change input in place
ok 5 - _isbn_cleanup removes hyphens
ok 6 - _isbn_cleanup removes parenthetical
ok 7 - _isbn_cleanup converts ISBN-13 to ISBN-10
ok 5 - Date and ISBN tests
ok
All tests successful.
Files=1, Tests=5, 1 wallclock secs ( 0.02 usr 0.01 sys + 0.48 cusr 0.06 csys = 0.57 CPU)
Result: PASS
http://bugs.koha-community.org/show_bug.cgi?id=5327
- in various acquisition pages and serials home
- in database : biblioitems.ean
- adds ean and its mapping in default english bibliographic framework
- adds ean mapping in default french bibliographic framework
- ean search is not enabled for MARC21
The required mapping between the ean marc field and the biblioitems.ean
database field will be automatically added on an existing unimarc installation.
However, if you already have records with ean, you will have to
run misc/batchRebuildBiblioTables.pl to populate biblioitems.ean
Signed-off-by: jmbroust <jean-manuel.broust@univ-lyon2.fr>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Passed QA at second run. Removed a merge marker only.
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
preference works as expected.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Tested that CircAutoPrintQuickSlip clear the screen still works well
