According to the list of two-letter language codes found in ISO 639-1
(https://en.wikipedia.org/wiki/List_of_ISO_639-1_codes), the correct
Zebra language option for Greek should be 'el', not 'gr'.
This patch fixes that.
Test plan:
0) Apply the patch.
1) Confirm that 'gr' has been changed to 'el' in all relevant files.
2) Create a new Koha instance using `koha-create --zebralang el testinst1`.
3) Edit /etc/koha/koha-sites.conf and set ZEBRA_LANGUAGE to 'el'. Then,
create another Koha instance with `koha-create testinst2`.
4) Confirm that both instances created in steps 2) and 3) have picked up
the Zebra CHR file from the /etc/koha/zebradb/lang_defs/el/ directory.
This is done by inspecting the value of 'profilePath' in these files:
/etc/koha/sites/testinst{1,2}/zebra-authorities-dom.cfg
/etc/koha/sites/testinst{1,2}/zebra-biblios-dom.cfg
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
cpanfile is a format for describing CPAN dependencies for Perl
applications.
It is more concise - thus easier to read and maintain - than
C4::Installer::PerlDependencies, and allows to describe requirements
more accurately (using version ranges or features for instance)
Additionally it can be read by tools such as cpanm or carton for an
easy way to install dependencies on non-Debian-based systems.
For more information on cpanfile, see
http://search.cpan.org/~miyagawa/Module-CPANfile-1.1002/lib/cpanfile.pod
This patch replace C4::Installer::PerlDependencies by an equivalent
cpanfile and update all scripts/modules that were using PerlDependencies
It also removes dead code from C4::Installer::PerlModules (some
subroutines were not used at all, except in unit tests)
Added dependencies:
- Module::CPANfile
- CPAN::Meta (dependency of Module::CPANfile, but we need a more recent
version than the one Module::CPANfile requires)
Test plan:
1. Go to About page, tab Perl modules and keep this browser tab open
2. Apply patch
3. Install Module::CPANfile and CPAN::Meta
a. On Debian-based systems:
# will install libcpan-meta-perl as a dependency
sudo apt install libmodule-cpanfile-perl
b. Others:
# will install CPAN::Meta as a dependency
sudo cpanm Module::CPANfile
4. In a new browser tab, go to About page, tab Perl modules and compare
the table with the one in the previous browser tab
They should be identical, except for newly added dependencies
(Module::CPANfile and CPAN::Meta)
5. Do a 'standard' install
a. perl Makefile.PL (select 'standard')
b. make
c. sudo make install
d. Configure your database, web server, ... and go through the web
install process
6. Verify that the cpanfile got copied into PERL_MODULE_DIR (which
should be /usr/share/koha/lib)
7. Go to the about page of this fresh install and compare it with your
dev install
8. Verify that debian/list-deps still works
This takes a lot of time and it may not be necessary to wait until
the end. If you see some Debian package names that correspond to
modules in cpanfile, it means it still works
(you need apt-file for this script to work)
9. Verify that koha_perl_deps.pl still works
10. prove t/Installer_pm.t t/Installer_PerlModules.t
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Missing installer for debian packages.
Sponsored-by: Koha-Suomi Oy
Signed-off-by: Johanna Raisa <johanna.raisa@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Like history.txt we need to tell some debian/ files to copy
teams.yaml
Also pick it for the `make install` process (Makefile.PL)
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Like history.txt we need to tell some debian/ files to copy contributors.yaml
Also pick it for the `make install` process (Makefile.PL)
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
There appears to be no xml_sax.pl in Koha, so the
reference should be removed.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch was generated using codespell
Test plan:
Read through changes and confirm they make sense
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
https://bugs.koha-community.org/show_bug.cgi?id=21706
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Remove:
- BIB_INDEX_MODE and AUTH_INDEX_MODE env var
- bib_index_mode and auth_index_mode options from scripts
- Warnings from about page, just kept one if zebra_bib_index_mode or
zebra_auth_index_mode still exist in config and are set to grs1
Test plan:
- Install Koha from src
- Install Koha from pkg
- Read the code, carefully!
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Rebased
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
koha_1 | # Failed test 'All directories should be mapped:
.sass-lint.yml,.scss-lint.yml,gulpfile.js,package.json,yarn.lock'
koha_1 | # at t/Makefile.t line 47.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Note that there is no way to create an install without memcached.
As it is now considered as stable, there is no point to not use it.
Test plan:
Create a new Koha install and make sure memcached is enabled by default
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds Makefile.PL the capability of handling the template_cache_dir configuration entry.
To do so, it:
- Adds the --template-cache-dir option switch (consistency with koha-create)
- Sets a default value for template_cache_dir to '/tmp/koha'
- Adds a dialog requesting the path for the template cache dir to Makefile.PL
- It tweaks etc/koha-conf.xml so it is correctly changed by rewrite-config.PL
To test:
- Apply this patch
- Run:
$ perl Makefile.PL --template-cache-dir your/favourite/dir
=> SUCCESS: The dialogs don't ask for template cache dir
=> SUCCESS: The resulting Makefile contains an entry for TEMPLATE_CACHE_DIR which value
matches what we passed to --template-cache-dir
- Run:
$ perl Makefile.PL
- When prompted for a template cache dir, introduce whatever you want
=> SUCCESS: The default you are offered is /tmp/koha
=> SUCCESS: At the end of the process, Makefile contains what we put in there
- Run:
$ sudo make install
=> SUCCESS: The resulting koha-conf.xml contains a <template_cache_dir> entry containing
whatever you picked for that purpose.
- Sign off :-D
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This Commit is at the heart of adding an interlibrary loans framework
for Koha. The framework does not prescribe a particular workflow.
Instead it provides a general framework that can be extended &
implemented by individual backends whose responsibility it is to
implement a specific workflow.
The module is largely self-sufficient: it adds new tables to the Koha
database and touches only a few files in the Koha source tree.
Primarily, we add our files to the Makefile and the koha-conf.xml,
define ill paths for the REST API, and introduce links from the main
intranet, opac pages & user permissions.
Outside of this we simply add new files & functionality.
Signed-off-by: Magnus Enger <magnus@libriotech.no>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Benjamin Rokseth <benjamin.rokseth@kul.oslo.kommune.no>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds the required entry in Makefile.PL so the clubs/ dir is correctly installed
during the make install step.
To test:
- Run:
$ cd kohaclone
$ perl Makefile.PL
- Follow any install method and options
- Run
$ make
$ ls blib/INTRANET_CGI_DIR/ | grep clubs
=> FAIL: No clubs dir
- Run:
$ make clean
- Apply this patch
- Run:
$ perl Makefile.PL
- Follow any install method and options
- Run
$ make
$ ls blib/INTRANET_CGI_DIR/ | grep clubs
=> SUCCESS: The clubs/ dir is correctly picked for inclussion in the intranet cgi dir
- Sign off :-D
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Bug 18028 removed the install_misc directory but
install_misc/UpgradeBackup.pm was still used by the 'upgrade' rule of
make.
Other files from install_misc were useless to it may be better not to
reintroduce this directory with only 1 file.
Test plan:
`make`
`sudo make install`
`make upgrade`
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
In summary, changes are:
1) If you have chosen MySQL, Makefile.PL will ask you if you want TLS (default:
"no"), and then the locations for CA cert, client cert and client key
(reasonable defaults are provided). Settings <tls>, <ca>, <cert> and <key> are
added in koha-conf.xml
2) If <tls>yes</tls> in koha-conf.xml, the installer and database connection
scripts add the TLS options in both DBI connection strings and mysql command
line
To test
1/ Apply patch
2/ Check everything still works and db connections are the same as before
3/ Either run Makefile.PL and step through the options or edit your koha-conf.xml to
enable TLS
4/ Check db connections are still working
Patch provided to me by Dimitris Kamenopoulos and I reformatted it into a git patch,
any errors are probably mine
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
* Makefile.PL: Add `zebra_sru_host`, `zebra_sru_biblios_port` &
`zebra_sru_authorities_port` as possible command line arguments.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Currently the Makefile.pl script only accepts the '--prev-install-log' commandline flag for reading Koha configuration values from the previous installation.
The Makefile does not have help output.
The aim of this bug report is to add 2 things:
- --help output
- commandline parameters that should allow automating many of the common settings if desired
- when commandline parameters are not passed we simply fall back to the interactive method of old
Test Plan:
- Run the Makefile without parameters — the script should work as before.
- Run the script with the '-h' flag — it should output help.
- Run the script with any number of additional legal flags — the script should skip those questions in its interactive mode.
Signed-off-by: Nicolas Legrand <nicolas.legrand@bulac.fr>
Reworked the log message with Bugzilla comments.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Amended patch: perltidy GetOptions block
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Test plan:
1) Apply patch
2) Create new instance with parameter --zebralang cs
3) Insert some record with basic latin characters and some with "czech" characters (for example: "č" - should be sorted after "c", "š" - should be sorted after "s")
4) Try to search in katalog (staff and opac) and sort by other field then relevance - title or author for instance
5) Records should be sorted correctly by Czech rules
6) Look at code and confirm it is ok
Signed-off-by: radiuscz <radek.siman@centrum.cz>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
I did not test this patch, but trust in the author and signoffer
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
The original Makefile.PL tweak missed to trim the directory name thus
repeating the 'api' directory like in 'api/api'.
To test:
- Make a standard install (for example in /usr/share/koha
=> FAIL: check /usr/share/koha/api/api exists
- Make a single install (for example in /home/tcohen/koha-single)
=> FAIL: check /home/tcohen/koha-single/api/api exists
- Apply the patch
- Make a standard install (for example in /usr/share/koha
=> SUCCESS: check /usr/share/koha/api exists and doesn't contain a nested 'api' dir
- Make a single install (for example in /home/tcohen/koha-single)
=> SUCCESS: check /home/tcohen/koha-single/api exists and doesn't contain a nested 'api' dir
- Sign off :-D
Note: this affects the packages too, as the standard install is used as a basis.
Signed-off-by: Benjamin Rokseth <benjamin.rokseth@kul.oslo.kommune.no>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
This module is no longer in use and can be removed.
Signed-off-by: Jacek Ablewicz <abl@biblos.pk.edu.pl>
This part involves some changes in a bunch of mysterious debian|ubuntu
related files, not quite sure if I know what I'm doing
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Add `api` folder to INTRANET_CGI_FOLDER in Makefile.PL so that the new
RESTFul API introduced in bug #13799 works also when installing with make.
Test plan:
- apply patch and do a `perl Makefile.PL` install
- observe that INSTALL_DIR/intranet/cgi-bin now has a folder `api`
containing the swagger files and the api cgi mount, app.pl.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.z>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Brendan Gallagher <bredan@bywatersolutions.com>
Allows for selection of DejaVu font path when installing from the command line. This
is useful for non-debian distributions that don't store the fonts in the same place.
Adds a new configuration variable to Makefile.PL: FONT_DIR
Defaults to the Debian install location for the fonts.
Test plan:
1. Run a CLI install, accepting the defaults.
2. Compare the generated koha-conf.xml to a
previous install - the font path for DejaVu fonts should be the same.
3. Run another CLI install, this time choosing a custom path for the fonts
4. Check that the path selected is reflected in the koha-conf.xml file.
NOTE: 'perl Makefile.pl' and 'make' generates blib/KOHA_CONF_DIR/koha-conf.xml
ran with a weird string for the font dir
copied that koha-conf.xml to my home dir
reran with all defaults
compared the two, and only the font paths differed.
Also, I cleaned up the tabs that snuck in. :)
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Since the introduction of Koha::Logger, it appears that the
log4perl.conf config file has been broken. The references to __LOG_DIR__
is not being replaced.
Test Plan:
1) Apply this patch
2) Run 'perl Makefile.PL'
3) Run 'make'
4) Open blib/KOHA_CONF_DIR/log4perl.conf with a text editor
5) Note the log file paths are correctly set, and do not have
__LOG_DIR__ in them.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Chris Nighswonger <cnighswonger@foundations.edu>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
http://bugs.koha-community.org/show_bug.cgi?id=9987
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Larry Baerveldt <larry@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Previous patch remove the condition but not the block tested.
The entire block should be removed.
Signed-off-by: Larry Baerveldt <larry@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Edited Makefile.PL to remove mentions of win32
To test: Run Makefile.PL
Signed-off-by: Larry Baerveldt <larry@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Add greek as lang definition in installer.
Developed in collaboration with Giannis Kourmoulis <ikourmou@lib.auth.gr>
Test plan :
- Install using "gr" in "Primary language for Zebra indexing"
- check gr is used in etc/zebradb/zebra-*.cfg
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch makes the Makefile.PL script pick the rotating_collections/
directory for install.
To test:
- Run:
$ perl Makefile.PL
- Install using either 'standard' or 'single' method.
=> FAIL: Verify that there is no 'rotating_collections' directory
on the intranet CGI direcory.
- Apply the patch
- Run:
$ perl Makefile.PL
- Install using either 'standard' or 'single' method.
=> SUCCESS: Verify that there is a 'rotating_collections' directory
on the intranet CGI direcory.
- Sign off :-D
Regards
Tomas
PS1: Note that it should be enough to check for the rotating_collections files
on the generated Makefile after 'perl Makefile.PL'.
PS2: The packages use the 'standard' install method to generate the file tree.
So this patch should fix the packages too.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
On the 23 July development meeting it was decided to formally deprecate
GRS-1 indexing mode for Zebra. This patch makes code fallback to DOM
on the remaining places. No behaviour change should be noticed, as DOM
has been the default for a while.
Regards
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes tests and QA script.
Also checked running Makefile.PL
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
[1] Routine add_cron_job was added in 2007 but has not been defined.
Parameter Recurring is not used.
[2] Made some changes to koha-conf.xml. Instead of an example to edit,
I replaced it by the SCRIPT_NONDEV_DIR install variable.
[3] SCRIPT_NONDEV_DIR had to be included in rewrite-config.pl and the
path had to be corrected for dev installs in Makefile.PL
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Tested single and dev install for supportdir change.
Compared installations with and without the patches for this report.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Add a separate phrases-icu.xml for phrase indexes
The file is based on that distributed with zebra
with a couple of additions to reflect Koha usage
This patch adds a separate tokenizer variable
for phrase indexes so that default.idx is
correctly rewritten for sites using icu
indexing
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
- Applied patch
- perl Makefile.PL --prev-install-log ../koha-dev/misc/koha-install-log
- make upgrade
- Restarted Zebra server
- Did a full reindex of bibliographic and authorities
- Checked various searches
- Links records to authorities
- Checked created links work correctly
I couldn't find a regression with this patch.
Passes all tests and QA script.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch adds locking to rebuild_zebra.pl to ensure that simultaneous
changes are prevented (as one is likely to overwrite the other).
Incremental updates in daemon mode will skipped if the lock is busy
and they will be picked up on the next pass. Non-daemon mode
invocations will also exit immediately if they cannot get the lock
unless the new flag -wait-for-lock is specified, in which case they
will wait until the get the lock and then proceed.
Supporting changes made to Makefile.PL and templates for the new
locking directory (paralleling the other zebra lock directories).
We stash the zebra_lockdir in koha-conf.xml so rebuild_zebra.pl
can find it.
To address earlier QA concerns we:
1. added code to check if flock is available and ignore locking if
it's missing (from M. de Rooy)
2. changed default for adhoc invocations to abort if they cannot
obtain the lock. Added option -wait-for-lock if the user prefers
to wait until the lock is free, and then continue processing.
3. added missing entry to t/db_dependent/zebra_config.pl
4. added a fallback locking directory of /tmp
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Doug merged the original patch with the QA changes.
Just for the record, noting here that the original patch was tested
extensively too by Martin Renvoize.
I have added a followup for some exceptional cases.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Running Makefile.PL asks the user whether to install the Zebra
configuration files and different texts relate to the user having
chosen to use Zebra.
This patch removes references to choosing to use Zebra and removes
the related variables from the code.
To test:
- Apply the patch
- Go through the different install modes
- Verify that nothing nothing is broken
Sponsored-by: Universidad Nacional de Cordoba
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Makefile.PL: Section for creating file t/test-config.txt removed.
Removes t/Makefile and t/rewrite-config-test too.
Modifies XISBN.t to remove two commented lines.
Test plan:
Grep for KohaTest, database_dependent, config-test, t/Makefile.
Run perl Makefile.PL and include running the test suite.
This may fail on t/00-valid-xml.t and t/QueryParser.t, but that is not the
result of this patch. Same for t/00-load.t with potential error on
Koha::Plugins::Base.
I had this result:
Test Summary Report:
t/00-valid-xml.t (Wstat: 1792 Tests: 381 Failed: 7)
Failed tests: 10, 30-31, 169, 181, 201-202
Non-zero exit status: 7
t/QueryParser.t (Wstat: 512 Tests: 0 Failed: 0)
Non-zero exit status: 2
Parse errors: No plan found in TAP output
Files=92, Tests=12385, 45 wallclock secs ( 1.74 usr 0.15 sys + 26.61 cusr 1.92 csys = 30.42 CPU)
Result: FAIL
Failed 2/92 test programs. 7/12385 subtests failed.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
All tests pass, and I find no mention of the removed test code.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch makes Makefile.PL put the history.txt file in the right places
depending on the chosen setup layout, adds a reference to that place in
koha-conf.xml (and debian template version), and finally tweaks about.pl to
use it.
To test, apply the patch and verify that perl Makefile.PL runs fine, and
installing in
- dev
- single
- standard
layouts works as expected. Then go to the about.pl page and see if Koha's
history shows there.
Then, build your packages and test on your newly created instances.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch add the option to choose 'ru' and 'uk' during install for Zebra.
Should work for a tarball install, and make 'ru' and 'uk' available for using
with koha-create too.
Sponsored-by: Universidad Nacional de Córdoba
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Reran Makefile.pl and made sure the language options show up now.
Patch extends existing language code lists addings nb, ru and uk
where missing.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch provides a definition file for Spanish (es) character
sorting in Zebra. It is based on the ideas from Hugo Agud <hagud@orex.es>
and Pablo Bianchi <pablo.bianchi@gmail.com>.
Makefile.PL is fixed to notice the existence of the 'es' language. The
docs for koha-create are touched too.
To test:
Tarball
=======
- Go through the install process, choosing 'es' for the Zebra's language step
- Koha should work as usual.
- Running this should show the lang definition is properly set.
$ grep -R "lang_defs/es" /etc/koha/*
(stuff like zebradb/zebra-biblios-dom.cfg:profilePath:...etc/koha/zebra/lang_defs/es... should show)
- This file should be present:
/etc/koha/zebradb/lang_defs/es/sort-string-utf.chr
Packages
========
- Build your own package, it shouldn't break the packaging
- Try the new package, using koha-create to set an instance using --lang 'es'
Sponsored-by: Universidad Nacional de Córdoba
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Adds a course reserves system for academic libraries.
The course reserves system allows libraries to create courses
and put items on reserves for those courses.
Each item with at least one reserve can have some of its attributes
modified while it is on reserve for at least one active course.
These attributes include item type, collection code, shelving location,
and holding library. If there are no active courses with this item
on reserve, it's attributes will revert to the original attributes
it had before going on reserve.
Test Plan:
1) Create new authorised value categories DEPARTMENT and TERM
2) Create a new course, add instructors to that course.
3) Reserve items for that course, verify item attributes have changed.
4) Disable course, verify item attributes have reverted.
5) Enable course again, verify item attributes again.
6) Delete course, verify item attributes again.
7) Create two new courses, add the same item(s) to both courses.
8) Disable one course, verify item attributes have not reverted.
9) Disable both courses, verify item attributes have reverted.
10) Enable one course, verify item attributes are again set to the
new values.
11) Edit reserve item attributes, verify.
12) Disable all courses, edit reserve item attributes, verify
the item itself still has its original attributes, verify
the reserve item attributes have been updated.
13) Verify the ability to remove instructors from a course.
14) Verify new permissions, top level coursereserves, with
subpermissions add_reserves and delete_reserves.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Corinne Bulac <corinne.hayet@bulac.fr>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
http://bugs.koha-community.org/show_bug.cgi?id=8125
Create the plugins directory in the Makefile
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
One line change, all ok.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Adds support for custom plugins. At the moment the Plugins
feature supports two types of plugins, reports and tools.
Plugins are installed by uploading KPZ ( Koha Plugin Zip )
packages. A KPZ file is just a zip file containing the
perl files, template files, and any other files neccessary
to make the plugin work.
Test plan:
1) Apply patch
2) Run updatedatabase.pl
3) Create the directory /var/lib/koha/plugins
4) Add the lines
<pluginsdir>/var/lib/koha/plugins</pluginsdir>
<enable_plugins>1</enable_plugins>"
to your koha-conf.xml file
5) Add the line
Alias /plugin/ "/var/lib/koha/plugins/"
to your koha-httpd.conf file
6) Restart your webserver
7) Access the plugins system from the "More" pulldown
8) Upload the example plugin file provided here
9) Try it out!
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
