This fixes 2 related problems:
1) The editor only offered 3 entries from biblio for adding to the notice:
title, author, serial
It was not clear that actually all fields from biblio can be used.
2) It was not possible to use fields from biblioitems in the notices
which left out important fields like the ISSN.
The patch adds the biblioitems table and changes the editor to show
all entries from biblio and biblioitems table are shown on the left.
To test:
- Create a subscription
- Generate next issue a few times to get late issues
- Create a new notice in the "Claim serial issue" module
- Use fields from different/all tables
- Make sure an email address is set for
- the vendor (also check for 'receives claims for late issues')
- your staff user
- Go to serials > claims
- Claim multiple issues
- Verify the email is generated and contains the correct information
Example notice:
Title: <<biblio.title>>
Author: <<biblio.author>>
ISSN: <<biblioitems.issn>>
ISBN: <<biblioitems.isbn>>
Issue: <<serial.serialseq>>
--
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
- This patch adds shibboleth authentication to the staff client.
- Depending upon how your url structure works, you may or may not need a
second native shibboleth service provider profile configured for this
to work.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch makes it possible to add an extra column to Z3950 search results.
The system preference AdditionalFieldsInZ3950ResultSearch decides which MARC field/subfields are displayed in the column.
Testing:
I Apply the patch
II Run updatedatabase.pl
ACQUISITIONS
0) Enter a field/subfield in the AdditionalFieldsInZ3950ResultSearch
1) Create a new basket or use an existing one
2) In -Add order to basket-, click "From an external source"
3) Select some search targets and enter a subject heading ex. house
4) Click Search bouton
5) Validate "Additional fields" column with the field/subfield value.
CATALOGUING
0) Shares same syspref as above
1) Go to cataloguing, click New from z3950
2) Fill to result in a successful search
3) Validate column Addition Fields
prove t/db_dependent/Breeding.t
Sponsored-by: CCSR (https://ccsr.qc.ca)
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Séverine QUEUNE <severine.queune@bulac.fr>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Test plan:
1) Apply the patch
2) prove t/db_dependent/Breeding.t
3) Try to search using Z39.50, both, authority and biblio should still
work
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
1) Apply the patch
2) Go to administration and set up a z39.50 authority server, which does
support searching by control number (use attribute 12), you can use czech
national library server:
host: aleph.nkp.cz
port: 9991
base: aut-utf
format: MARC21
encoding: UTF-8
3) Try to find an authority by control number using z39.50 - if you use the server
recomended in point 2) there is web access to the base at
http://aleph.nkp.cz/eng/aut
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Fixed a typo in a code comment and a whitespace issue in the template.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
When circ rules are set to cap at item replacement cost, calcfine only
checks the price in the item record, not the default replacement cost by
item type.
Note: We do not take '0' into account, what if you do not want to set
a replacement cost for an item? It is how it is done in chargelostitem
so keeping the existing behaviour, but that may be considered as a bug (?)
Test plan:
- Set useDefaultReplacementCost to use
- Set a default replacement cost for a given item type
- Create an item of that type with a replacementcost=0
- Create a circ rule for that item type that accrues fines but caps at
replacement cost
- check the item out, forcing a due date in the past
- check that item in
=> Fines should have been generated
Signed-off-by: Caroline Cyr La rose <caroline.cyr-la-rose@inlibro.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Multi params are not handle correctly after login
Test plan:
[0] Use staff interface
[1] Use advance search and tick itemtype more than one checkbox
[2] Copy result url
[3] Logout
[4] Paste url in browser
[5] Type username and password
[6] In search result page, results limit description under breadcrumbs
will show all limits
Signed-off-by: Séverine QUEUNE <severine.queune@bulac.fr>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Added a (initially trivial) test in Creators/Lib.t too.
Sometimes you start something, but you end somewhere else ;)
The test seems a bit slower now (regex, lookahead, etc). But this should
not hurt label creators in daily use.
Advantages: code is even more solid, consolidated in one place and can be
tested on its own.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
TEST PLAN
---------
1) apply first patch
2) kshell kohadev
3) prove -r -v t/db_dependent/Creators/
-- failures
4) apply this patch
5) repeat 2,3
-- no failures
6) run koha qa test tools
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
'rows' is a reserved word since MariaDB 10.2.4 and MySQL
https://mariadb.com/kb/en/library/mariadb-1024-release-notes/https://dev.mysql.com/doc/refman/8.0/en/keywords.html
Test plan:
Do not apply this patch and make sure you recreate the reported issue
Apply this patch and confirm that it is now fixed.
QA will take care for the changes in installer and test files
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
If you choose to enforce GDPR policy, a user needs to give consent for
data processing before he does something else in the OPAC while being
logged in.
Test plan:
[1] Set GDPR_Policy to Disabled or Permissive. Usual behavior.
[2] Set to Enforced. Save a refusal on your consents. Notice that
you are logged out when saving. When you login again, all OPAC
requests are redirected to your consents tab.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Séverine QUEUNE <severine.queune@bulac.fr>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
It is possible to set up circulation rules to limit trapping of holds by pickup library and itemtype.
To make it easier to understand which holds will be trapped in a given circumstance,
it would be nice if we could optionally group holds by pickup library and/or itemtype.
Test Plan:
1) Apply this patch set
2) Run updatedatabase.pl
3) Enable AllowHoldItemTypeSelection
4) Pick a record and create holds with various pickup libraries and itemtype combinations
5) Enable HoldsSplitQueueNumbering
6) Try the different combinations of HoldsSplitQueue
7) Ensure the hold "arrows" move the items correctly
* Up and down arrows should move hold above or below the adjacent hold within a hold fieldset
* Top and borrom arrows should move hold to the top or bottom within a hold fieldset
Sponsored-by: Stockholm University Library
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Followed test plan, patch worked as described. Also passed QA test tool
Signed-off-by: Alex Buckley <alexbuckley@catalyst.net.nz>
Signed-off-by: Andreas Hedström Mace <andreas.hedstrom.mace@sub.su.se>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
The bug is that $sessionID is declared twice in C4::Auth::checkauth().
At the moment, this doesn't actually create a problem, because no
one seems to be using the $sessionID which is returned by checkauth(),
except in the case of opac/external/overdrive/auth.pl which skips
the second declartion as it doesn't require auth.
This patch removes the redefining of the $sessionID variable.
In terms of testing, try logging in with a username and password
and see if it works. The only risk this patch would pose is breaking
auth I would think, since nothing is actually using the return value
from checkauth() for $sessionID.
NOTE:
It was initially defined near the top of the function (~line 791).
I believe the scoping would mean the correct version of $sessionID
would be used in the latter lines for the unset'ing.
I have skimmed code to see if the sessionID return value is used.
I did not test overdrive, as I do not know how. However, this is
the only area, I think this could possibly break. This change makes
sense to me.
QA: Please test overdrive.
opac/external/overdrive/auth.pl only checks if the value is set, so
this patch might fix/break something there?
opac/svc/overdrive same kind of check.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
This is a (tiny) code improvement. Now we consistently return the session
id that is also stored in the returned cookie. (Which can be an 'anon'
session.)
Fact is that Koha almost everywhere ignores the returned session id and
sometimes gets the session from the cookie (obviously). The session id is
also passed to the template by get_template_and_user but never used in
templates.
As mentioned, the two overdrive scripts are the exception. But since both
test on both $user && $sessionID, they will not choke on an anynonomous
session id without userid. So theoretically fine, but not tested.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This table was only used by XISBN, this patch remove the table and the
related code (cronjobs)
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
https://bugs.koha-community.org/show_bug.cgi?id=21235
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This dependency is missing from the PerlDependencies.pm file.
This patch adds it.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch adds $branchcode_to parameter to CanBookBeReserved and
CanItemBeReserved. It represents the pickup location for the hold.
To test:
1. prove t/db_dependent/Holds.t
Signed-off-by: Koha Team AMU <axelle.clarisse@univ-amu.fr>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
To test:
0 - Apply patches and updatedatabase
1 - Add an order to a basket
2 - You should note new 'Retail price field'
3 - You should have a separate 'Replacement price' field
4 - Enter values and ensure they are saved as expected
5 - In the basket you should see the replacement price
6 - Modify order and ensure value is loaded and saved correctly
7 - Add and cancle an order and esure replacement price shows/saves
8 - Close basket
9 - Receive an order
10 - You should be able to edit replacement price
11 - 'retail price' field is not editable
12 - Check associated item, replacement price in item should be updated
13 - Cancel receipt, check item. receive again with new replacement
price, check item
14 - Price should be correctly updated
15 - Finish receipt, value should show in table
16 - Test with receive from file
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Remove:
- BIB_INDEX_MODE and AUTH_INDEX_MODE env var
- bib_index_mode and auth_index_mode options from scripts
- Warnings from about page, just kept one if zebra_bib_index_mode or
zebra_auth_index_mode still exist in config and are set to grs1
Test plan:
- Install Koha from src
- Install Koha from pkg
- Read the code, carefully!
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Rebased
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Those calls to C4::Items::GetItemnumbersForBiblio can be replaced with
my @itemnumbers = Koha::Items->search({ biblionumber => $biblionumber})->get_column("itemnumber")
Test plan:
- Use the GetAvailability service of ILS-DI
- Try to place a hold on an item that is available and another one
- Use the batch record deletion tool to remove record with and without items.
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Test plan:
1) Set up your SIP: https://wiki.koha-community.org/wiki/Koha_SIP2_server_setup
2) Run:
misc/sip_cli_emulator.pl -a localhost -p 6001 -su <login> -sp <passsword> -l <library_code> --patron <borrowernumber> -s "Y " -m patron_information
the -s parameter says what kind of additional information you want to see
3) Check the response: if the requested patron has waiting hold, there
is field "AS" with the barcode of waiting item
The right response looks like this:
64 00120180817
052434000100000000000000000000AOCPL|AA1|AEKoha Admin|BLY|CC5|AS39999000004410|PCS|PIY|AFGreetings from Koha. |
More reading ;)
http://multimedia.3m.com/mws/media/355361O/sip2-protocol.pdf
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Test plan:
git grep GetBarcodeFromItemnumber
should not return anything
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Those calls to C4::Items::GetBarcodeFromItemnumber can be replaced with
my $barcode = Koha::Items->find($itemnumber)->barcode;
But if we are not sure that the item exists, we should test the return
of ->find before ->barcode
Test plan:
- Edit an item
- Check an item in
- Test SIP - I do not really know how to trigger that code, apparently
misc/sip_cli_emulator.pl does not deal with holds. Any ideas?
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
http://lists.koha-community.org/pipermail/koha-devel/2018-August/044757.html
Prior to this patch, GetRecords returned timestampX, cardX and borrowerX for
the last 3 patrons who checked out the items.
I have no idea if it is a desired effects but, as this code has been
there for a very long time (2005), I suspect it's not.
The "doc" (/ilsdi.pl?service=Describe&verb=GetRecords) does not say
anything about the checkouts info.
Test plan:
hit /ilsdi.pl?service=GetRecords&id=1
and confirm the info about items are displayed correctly
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
C4::Items::GetItemnumberFromBarcode calls can be replaced with
Koha::Items->find({ barcode => $barcode });
We should make sure the barcode existed in DB and so that ->find
returns an object. Note that most of the time we just wanted to know if
the barcode existed.
The changes are very simple, the only one that need attention is
the one in batchMod.pl. It is basically reusing what we did on
bug 21141.
Test plan:
Use the batch item modification/deletion tools to modify/delete items
from their barcode (using the textarea or a file)
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Test plan:
git grep GetItemnumberFromBarcode
should not return anything
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch is a little fix for a much bigger hidden issues.
The original issue:
1. Set the firstname and surname values of a paontr to utf-8 characters
("wide characters"), for instance 月月
2. Use this patron to login at the staff interface
=> In the header the logged in patron's info (concat of firstname and
surname) are displayed correctly
3. Hit whatever link
=> In the header the info are now displayed incorrectly
("ææ")
What happens?
After that the user loggin, loggedinusername is set with the value from
the DB (borrowers.userid)
On next hits it is picked from the session (which contains the decoded
utf8 value, see first lines of C4::Context->set_userenv)
From C4::Auth::checkauth:
834 $s_userid = $session->param('id') // ''
The quick fix is to use the logged_in_user variable in the template, but
it seems that issues may occurred if external authentication is used
(ldap, shib, cas). Could someone test this?
Test plan:
Make sure the original issue is fixed
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
When the syspref BlockReturnOfLostItems is set to Block, the item is blocked from being returned, but is still considered found -- it's set to lost=0 and a refund is applied to the patron (if circ rules allow). The item can then be checked in a second time and returned as it is no longer lost.
Test Plan:
1) Set an item to lost
2) Set BlockReturnOfLostItems to Block
3) Check the lost item in
4) Checkin message should say item is lost and cannot be returned
5) Check lost status of item, it should remain unchanged
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Bug 11401 introduced code to support Norwegian national library card.
This code is too specific to be part of Koha as it, it should be a
plugin instead.
Moreover nobody uses it, but a modified version (see comment 3).
Test plan:
Add/edit/delete patron and make sure there are no regressions introduced
by these patches
Signed-off-by: Benjamin Rokseth <benjamin.rokseth@deichman.no>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
It's possible to set a limit on the maximum number of holds for a particular branch/category/itemtype, but not on the total number of holds for a given patron (by branch/category).
This new rule works in conjunction with the existing branch/borrower/item rules in that Koha will use the lower of the two limits. This new rule counts all holds of all types, which prevents bib-level holds from not being counted for the purpose of these limits. This makes the most sense and was also requested by the sponsor.
Test Plan:
1) Apply this patch
2) Run updatedatabase.pl
3) Go to the circ rules editor, note the new max holds rules
by patron category in the "Checkout limit by patron category".
( Should we rename this section? )
4) Create find a patron that is allowed to place a hold, count the
number of holds that patron has. Lets make that number 'X'.
5) Set the new max holds rule to X for "All libraries"
6) Note the patron can no longer place another hold
7) Set the new max holds rule to X + 1 for the patron's home library
8) Note the patron can again place another hold
9) Set the new max holds rule to X for the patron's home library
10) Note the patron can no longer place another hold
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
To duplicate the budget, the function CloneBudgetHierarchy create a new budget
from the old without the parameter timestamp, so that the database generates a
new one.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Added unit tests to patch
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Modified to run properly the QA tests
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
RemoveLostItem was 'used' in C4::Accounts, but is not
actually used there.
Call has been removed by
commit ed9cf81c3a
Bug 15896 - Use Koha::Account::pay internally for makepayment
To test:
- Verify that the routine was actually not used!
Signed-off-by: Maryse Simard <maryse.simard@inlibro.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
If an item is no longer issued but somehow still has a date in the onloan
column, checking it in should clear that date.
Adding a ModItem call in the NotIssued section.
Test plan:
[1] Run t/db_dependent/Circulation.t
[2] Bonus: Checkout item, delete issue from table, checkin. Verify that
items.onloan has been cleared.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Charles Farmer <charles.farmer@inLibro.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
To test:
Ideally tested on a working ldap server with bind by auth and no
anonymous bind
1 - Define an LDAP config with bind by auth
2 - Don't define user/pass
3 - Define anonymous_bind = 0
4 - Attempt bind by auth
5 - Error is something like:
LDAP search failed to return object : XXXXXXXXX: LdapErr: XXXX-XXXXXX,
comment: In order to perform this operation a successful bind must
be completed on the connection., data 0, v2580 at
/usr/share/koha/lib/C4/Auth_with_ldap.pm line 102.
6 - Define user/pass
7 - Now bind by auth should work
8 - remove user/pass
9 - Apply patch
10 - Attempt again
11 - Bind by auth shoudl succeed
prove -v t/db_dependent/Auth_with_ldap.t
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Caused by
commit cb336e633b
Bug 18255: Koha::Biblio - Replace GetBiblioItemByBiblioNumber with Koha::Biblio->biblioitem
Can't call method "biblioitem" on an undefined value at /home/vagrant/kohaclone/C4/ILSDI/Services.pm line 212
Test plan:
- Enable ilsdi
- hit /cgi-bin/koha/ilsdi.pl?service=GetRecords&id=X
With X an existing biblionumber and a non existing one
Both requests must succeed
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
The step to install optional/mandatory things is broken with
many <br />'s instead of line breaks.
TEST PLAN
---------
1) Back up database
2) Drop database
3) Create empty database
4) Run web installer
-- Notice that step 3 has ugly <br />'s at the last
part of step 3.
5) Apply patch
6) Repeat steps 2-4
-- Notice the <br />'s are now nice line breaks.
NOTE: No promises of perfect positioning!
7) Run koha qa test tools.
Joubu: I have no idea if this is still needed. TO TEST
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
https://bugs.koha-community.org/show_bug.cgi?id=13618
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
