This patch fixes a copypasta'd copyright statement, and some incorrect
POD and indentation.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Show any relevant results from the OverDrive ebook/audiobook service
on the OPAC search. This is done by showing a link with "Found xx
results in the library's OverDrive collection" at the top of search
results and linking to a page that shows the full results.
This requires an OverDrive developer account, and is enabled by
setting the OverDriveClientKey and OverDriveClientSecret
system preferences. In addition, this patch adds the
OverDriveLibraryID system preference.
Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Signed-off-by: Henry Bankhead <hbankhead@losgatosca.gov>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch updates the wthdrawn field in items and deleteditems to be
withdrawn instead. No functional changes are made.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Comment: Save for translation files (that will be fixed on next release),
only occurrence of wthdrawn is on updatedatabase.pl
No koha-qa errors.
This touch many files, and I did not test everything,
but all seems normal. I think that any problem could
be fixed later.
Perhaps both entries in updatedatabase.pl could be joined
into one, but thats for QA.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
CheckReserves was using the CircControl system preference to determine what
patrons an item can fill a hold for. It should be using ReservesControlBranch
instead.
Test Plan:
1) Set ReservesControlBranch to "item's home library".
2) Create an item at Library A, place holds for it for patrons at
Library B, Library C, and Library A in that order,
for pickup at the patrons home library.
3) Make sure the holds policy for Library A is set to
Hold Policy = "From home library" and
Return Policy = "Item returns home".
Make sure the holds policies for the other libraries are set to
Hold Policy = "From any library".
4) Check the item in at Library C, the hold for the patron at Library B
should pop up, even though it's in violation of the circulation rules.
Don't click the confirm button!
5) Apply this patch, and reload the page,
now the hold listed should be for the last hold,
the hold for the patron at Library A, which is correct.
This patch adds the subroutine C4::Reserves::GetReservesControlBranch as
an equivilent to C4::Circulation::_GetCircControlBranch.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Fixed POD so that arguments and explanation match (C<$item>).
Also tested opac-reserves.pl for regressions.
Passes all tests, QA script, and Reserves.t.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
If there are items for a given biblio number, and they are all
hidden, then biblio needs to be hidden. If the biblio needs to
be hidden, this is done by setting the biblionumber to 0, which
triggers the same output as if the biblionumber does not exist.
Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Passes koha-qa.pl, works as advertised.
In the OPAC, the patron summary page (opac-user.pl) should display
subtitle along with title in the lists of checkouts, overdues, and
holds. This patch adds it.
To test, log in to the OPAC as a patron who has checkouts, overdues, and
holds which include titles with subtitles. Titles should appear
correctly with and without subtitles.
Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Remove uncalled sub GetCcodes
Also remove comment in opac-search.pl which is
remaining reference to it and serves no
useful purpose
Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
In OPAC most popular items page:
With user is logged-in his branch should be selected by default.
When a branch is manually selected and form is submitted, this branch
should be selected in results page.
When looking at HTML, you see that all options are selected in combobox.
This patch corrects by using the hidden input 'do_it' to distinguish
form display and no branch filter selected.
Test plan :
- Make sure there are issues on records created in the past 3 month
- Go to OPAC not logged-in
- Click on "Most popular"
=> You get to page with results, "All libraries" is selected
- Select a branch and submit
=> You get to page with results, the branch is selected [testing opac-topissues.inc from]
- Select a branch and perform a search that does not have results (for example an item type never issued)
=> You get to page without results, the branch is selected [testing opac-topissues.tt form]
- Log-in with a user
- Click on "Most popular"
=> You get to page with results, user's branch is selected
- Select "All libraries" and submit
=> You get to page with results, "All libraries" is selected [testing opac-topissues.inc from]
- Select "All libraries" and perform a search that does not have results (for example an item type never issued)
=> You get to page without results, "All libraries" is selected [testing opac-topissues.tt form]
Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works nicely and passes all tests.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
The OPAC still uses the old tablesorter plugin which isn't being
actively maintained. We use DataTables in the staff client and should in
the OPAC too. The plugin was added a while ago but never implemented on
any pages. This patch upgrades the plugin to the latest version and
places it in opac-tmpl/lib for cross-theme access. The patch implements
DataTables on all pages which previously used the tablesorter plugin.
The old tablesorter plugin is removed.
The customized DataTable configuration script, datatables.js, has been
trimmed-down from the staff client version in order to limit it to only
that functionality required in the OPAC.
Sorting based on date is done based on the data's enclosing <span> title
attribute as it is in the staff client:
<span title=" [% iso date %]">[% date | $KohaDates %]</span>
Slight modifications to Serials.pm and opac-search-history.pl have been
made to accommodate this change.
To test, view each page in the OPAC which uses JS-based table sorting:
- The bibliographic detail page
- The cart
- The search history page
- The suggestions page
- The tags page (logged in as a user who has entered tags)
- The "most popular" page (opac-topissues.pl)
- The logged in user summary page (opac-user.pl)
- The subscription "full history" page (opac-serial-issues.pl?selectview=full)
- The self-checkout main page (with existing checkouts)
Table sorting should work correctly on all pages in both the prog and
ccsr themes. Sorting should work for dates whatever your dateformat
system preference setting. Tables listing titles should exclude articles
("a," "an," and "the" in English) when sorting.
Also test the serial collection page in the staff client, which is
affected by the change to Serials.pm. Confirm that dates are displayed
and sorted correctly.
Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Passes koha-qa.pl, works as advertised!
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works really nicely on all pages.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
To test
Enable 'OpacHighlightedWords'
1) Run a search with multiple results
2) Click on a title of one of the results to get the full record
display. Hit highlighting SHOULD work on this page.
3) Use either the "Next" or "Previous" buttons on this page
(opac-detail) to move to the next or previous record.
4) Moving forward or back, the highlighting should still be working on
the page.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Add validation of the value of the KohaOpacRecentSearches. In
particular, this patch avoids the generation of an internal server
error when the OPAC is presented with an old cookie that uses the
old Storable-based serialization.
This patch also moves parsing of the cookie value into a
new routine in C4::Auth, ParseSearchHistoryCookie, and adds
a test case.
To test (in conjunction with the previous patch):
Exercise the OPAC search history functionality, after
turning on the EnableOpacSearchHistory syspref:
- As an anonymous user, conduct a variety of searches,
including ones that include non-ASCII characters
- Check the search history and verify that all searches
are listed
- Apply this patch and the previous one.
- Do *not* clear the KohaOpacRecentSearches cookie
- Check the search history and verify that no searches
are listed any more
- As an anonymous user, conduct a variety of searches,
including ones that include non-ASCII characters
- Check the search history and verify that all searches
are listed
- Log into the OPAC
- Verify that current and past searches are listed in
search history.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
To test:
Exercise the OPAC search history functionality, after
turning on the EnableOpacSearchHistory syspref:
- Clear the KohaOpacRecentSearches cookie
- As an anonymous user, conduct a variety of searches,
including ones that include non-ASCII characters
- Check the search history and verified that all searches
are listed
- Log into the OPAC
- Verify that current and past searches are listed in
search history.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
To test
1/ logout
2/ search "bar" (added to the history)
3/ search "féé" => history is empty
Apply patch
1/ logout
2/ search "bar" (added to the history)
3/ search "féé" => added to the history
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch switches from using a combination of
biblionumber/borrowernumber to using reserve_id where possible.
Test Plan:
1) Apply patch
2) Run t/db_dependent/Holds.t
Signed-off-by: Maxime Pelletier <maxime.pelletier@libeo.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
When the syspref is turned off, the link is hidden but the page is still
accessible. This patch checks the syspref and redirects to 404 if it is disabled.
Test plan:
Before applying the patch
Enable OpacTopissue
Observe there is a link to opac-topissues.pl next to Advanced search etc.
Follow that link, observe that opac-topissues.pl is loading
Disable OpacTopissue
Observe the link is gone
Manually open /koha/opac-topissues.pl and check that it is loading even though the feature is disabled
Apply patch
(OpacTopissue still diabled)
Manually open /koha/opac-topissues.pl and observe that you are being redirected to the 404 page.
Enable OpacTopissue
Follow the link or manuall open opac-topissues.pl and check that it is working
Signoff the patch.
Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
The prototype is not consistent, GetBranchCategory should return only 1 result
and GetBranchCategories should not have a categorycode argument.
This patch fixes that.
Test plan:
1/ Try to add/remove/modify a library.
2/ Add some groups
3/ Add these groups to a library
Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
The limit option was previously substituted directly into the query. The
previous patch on bug 10590 filters it on input, but there's no reason
not to have it made to work properly in the query for added safety.
To test:
[1] Go to the top checkouts report (http://OPAC/cgi-bin/koha/opac-topissues.pl)
[2] Run the report several times, varying the filters on
number of results and item type.
[3] Verify the the list of top checkouts appears to be correct.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
In opac-topissues page, the limit URL argument is directly added to SQL query.
This patch adds protections : limit must only contain digits and must be lower than 100.
Test plan :
- Edit URL to : /cgi-bin/koha/opac-topissues.pl?limit=10&branch=&itemtype=&timeLimit=999&do_it=1
=> You get the results of 10 most cheched-out of all time
- Edit URL to : /cgi-bin/koha/opac-topissues.pl?limit=&branch=&itemtype=&timeLimit=999&do_it=1
=> You get the results of 10 most cheched-out of all time
- Edit URL to : /cgi-bin/koha/opac-topissues.pl?limit=9999&branch=&itemtype=&timeLimit=999&do_it=1
=> You get the results of 100 most cheched-out of all time
- Edit URL to : /cgi-bin/koha/opac-topissues.pl?limit=WHERE&branch=&itemtype=&timeLimit=999&do_it=1
=> You get the results of 10 most cheched-out of all time
Signed-off-by: Robin Sheat <robin@catalyst.net.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Adds missing code that splits biblios before calling template.
To test:
- Add some items to cart
- Open cart, select some or all items
- Add to list; with patch, following window shold show something
like "Add 3 items to a list:", followed by list of items
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Passes koha-qa.pl, works as advertised.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Prior to this patch, if a patron has fines which exceed the limit set by
OPACFineNoRenewals but OPAC renewals are disallowed by OpacRenewalAllowed,
a message was displayed in their OPAC summary like this:
"Please note: You currently owe XXX in fines. Please pay your fines if you wish
to renew your books."
Information about outstanding fines in this case has no bearing on
how the user sees his summary of checkouts; since the user cannot
renew the loans from the OPAC regardless of their fine balance if
OpacRenewalAllowed is not enabled, this patch removes the message.
To test, try various combinations of OpacRenewalAllowed and
OPACFineNoRenewals with a patron who has outstanding fines:
- OpacRenewalAllowed ON and OPACFineNoRenewals ON (set to be triggered
by the test patron's fines): Logging in to the OPAC the patron should
see a warning on opac-user.pl about not being able to renew items
because of fines.
- OpacRenewalAllowed ON and OPACFineNoRenewals OFF (threshold high
enough not to trigger a block): No warning appears.
- OpacRenewalAllowed OFF and OPACFineNoRenewals ON: No warning appears.
- OpacRenewalAllowed OFF and OPACFineNoRenewals OFF: No warning appears.
If OpacRenewalAllowed is diabled and a patron's fines exceed the limit
set by OPACFineNoRenewals they should see no message.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Passes koha-ql.pl and perlcritic
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
As QA followup on report 9722. Built on top of another followup report 10321.
Test plan:
Run the db revision included in the other patch.
Enable OpacHoldNotes. Check that you can add a hold note on opac-reserve.
Do you see it on opac-user and in staff on catalog detail of that biblio?
Do a grep on ShowHoldNotes on the Koha code: grep -i ignores case. You should
find three occurrences only in updatedatabase.pl (the old dbrev and this dbrev
renaming them). These are fine.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Based on work for report 9722.
This patch resolves a small display problem with the number of columns of the
table on opac-reserve.
Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch groups all loops on the new_results array into one.
It is useless to loop on the same results array several times.
Test plan:
Quite hard to test all cases.
This patch deals with 5 sysprefs:
COinSinOPACResults, Babeltheque, TagsEnabled, TagsShowOnList and
OpacStarRatings.
Try to enable/disable all of them and verify there is no difference with
and without this patch.
The only different will be: The Babeltheque information should be displayed
even if the COinSinOPACResults syspref is disabled.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
This revised patch works fine for me, thanks.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Verified following system preferences still work as expected:
- COinSinOPACResults on/off
- TagsEnabled, TagsShowOnList, TagsInputOnList on/off
- OpacStarRatings
Couldn't test Babeltheque functionality as this requires an account.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
The option of adding a note is controlled by new pref OpacShowHoldNotes.
This development is part of a larger one (see umbrella report 9721).
Test plan:
1 Verify if new pref is disabled by default. Place a hold. You can't add a note.
2 Enable the pref. Place a hold and add a note. Check in staff if you can see
the note in Catalogue Detail/Holds tab.
3 Toggle SingleBranchmode, AllowHoldDateInFuture/OPACAllowHoldDateInFuture,
OPACShowHoldQueueDetails, or OPACItemHolds.
Check the display of columns when placing a hold from opac.
4 Place a few holds with notes from opac search results in one run (enable
DisplayMultiPlaceHold). Check results in staff again.
Remark: A few lines already refer to mandatory note reasons. This is handled
in a subsequent report. No reason to worry.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Renamed that routine to GetItemCourseReservesInfo in
order to avoid any potential confusion with reserves
qua hold requests.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
New modules should not export any symbols by default
without a very good reason.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Adds a course reserves system for academic libraries.
The course reserves system allows libraries to create courses
and put items on reserves for those courses.
Each item with at least one reserve can have some of its attributes
modified while it is on reserve for at least one active course.
These attributes include item type, collection code, shelving location,
and holding library. If there are no active courses with this item
on reserve, it's attributes will revert to the original attributes
it had before going on reserve.
Test Plan:
1) Create new authorised value categories DEPARTMENT and TERM
2) Create a new course, add instructors to that course.
3) Reserve items for that course, verify item attributes have changed.
4) Disable course, verify item attributes have reverted.
5) Enable course again, verify item attributes again.
6) Delete course, verify item attributes again.
7) Create two new courses, add the same item(s) to both courses.
8) Disable one course, verify item attributes have not reverted.
9) Disable both courses, verify item attributes have reverted.
10) Enable one course, verify item attributes are again set to the
new values.
11) Edit reserve item attributes, verify.
12) Disable all courses, edit reserve item attributes, verify
the item itself still has its original attributes, verify
the reserve item attributes have been updated.
13) Verify the ability to remove instructors from a course.
14) Verify new permissions, top level coursereserves, with
subpermissions add_reserves and delete_reserves.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Corinne Bulac <corinne.hayet@bulac.fr>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
http://bugs.koha-community.org/show_bug.cgi?id=8125
For reasons I cannot fathom, the split() in handling multi-branch
limits was not coming up with a valid search group code. Replacing
the split() with a substr() and creating the CGI parameter as a string
rather than as an arrayref fixes the problem. This problem may not
affect all installations, since I tested this exact feature just under
two months ago and it worked fine, and none of the relevant code has
been changed since then that I can see.
To test:
1) Create search group, and add at least one library to it, in
/cgi-bin/koha/admin/branches.pl
2) Apply patch
3) Try doing a search limited to your search group, making sure that
the search will match items that belong to a library in the search
group
4) Sign off
Signed-off-by: Magnus Enger <magnus@enger.priv.no>
I have failed to recreate the problem on three different dev installs,
both on Ubuntu and Debian, but the current patch does not break
anything as far as I can tell, so I'm signing off.
I tested with two libraries in the same search domain, with each
library owning a different book by the same author. Searching for
the author in
- all libraries,
- individual libraries and
- the search domain that contains both libraries
all return the expected results.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
All tests and QA script pass.
I couldn't reproduce the problem, but didn't find any regressions.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
The old pages for viewing and updating patron details in the OPAC have
been superceded by the new script opac-memberentry.pl. This patch
removes he old scripts and templates and corrects links to them.
This patch also removes reference to opac-userupdate.tt from
opac-patron-image.pl and replaces the authentication process with one
which uses check_cookie_auth, based on the example of opac-tags.pl.
To test, edit a patron record and set the "Gone no address" flag. Log in
to the OPAC with that account and view the patron details page. The
warning about out of date contact information should link to the new
update page.
Next, attempt to place a hold. You should see the same warning, and it
should also link to the new update page.
Test the display of patron images: Log in as a user who has an image
associated with their account and navigate to
/cgi-bin/koha/opac-patron-image.pl. Their patron image should display.
A search of Koha source files should return no results for the missing
scripts or templates.
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Comments on second patch.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
To reproduce:
- Make sure you do not have a session for the OPAC you will be testing
with. Delete the CGISESSID session cookie if you have one.
- Go directly to a detail view, e.g.:
/cgi-bin/koha/opac-detail.pl?biblionumber=1
- Observe the error "Can't use an undefined value as a HASH
reference at /home/magnus/scripts/kohadev/opac/opac-detail.pl line 445."
To test:
- Apply the patch
- Reload the page with the error
- You should now see the detail view of the record, as usual
Thanks to Chris Cormack who suggested the fix for this!
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Tested according to test plan, confirmed patch fixes the problem.
All tests and QA script pass.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
With the addition of opac-memberentry.pl to the OPAC we lost a way to
display the image associated with a patron's account. This patch adds
display of the patron image to opac-memberentry.pl now that
opac-userdetails.pl and opac-userupdate.pl are deprecated.
To test:
1. Log into the OPAC as a patron who has an image associated with their
account. View the "my personal details" tab and confirm that the
patron image appears with and without OPACPatronDetails enabled.
2. Log into the OPAC as a patron who has no image associated with their
account. View the "my personal details" tab and confirm that the
layout looks correct.
3. Turn off OPACpatronimages and confirm that the "my personal details"
page looks correct.
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Tested with OpacPatronDetails and OpacPatronImags turned on/off
and it's working well.
Template only changes.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
The $anyholdable variable was set to 0 or 1. However, as it is set in
a loop, and future changes to the opac-reserve.pl script may require
knowing how many items the patron is going to place a hold on, it makes
more sense to treat $anyholdable as a counter. This follow up turns it
into one.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
opac-reserve.pl tries to check whether all selected titles in a
multiple-hold batch are unavailable to be placed on hold. However, the
logic is flawed in such a way that if the last item in the batch cannot
be placed on hold the script assumes none can be placed on hold.
This patch modifies the way the script tracks the "no titles available
for holds" variable in order to correct the error.
To test, place multiple holds by selecting titles from a list of search
results. Test three conditions:
- All titles are available to be placed on hold
You should see no onscreen warnings, and all titles should be
selectable on the place hold screen. A "Place hold" button should
appear at the bottom.
- Some titles can be placed on hold, some cannot
The titles which can be placed on hold should be selectable.
Titles which cannot be placed on hold should show a warning
message. A "Place hold" button should appear at the bottom.
- No titles can be placed on hold
"Sorry, none of these items can be placed on hold." should appear at
the top of the page. All titles should appear with warning messages.
There should be no "Place hold" button.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
All tests and QA script pass.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Remedied by:
- in Circulation.pm changing AnonymiseIssueHistory so that it returns ($rows, $err_history_not_deleted) instead of $rows
- consequential change to misc/cronjobs/batch_anonymise.pl to handle updated return value, and fail if there is an error
- consequential change to tools/cleanborrowers.pl although this still fails silently (raised as bug 9944)
- update of opac-privacy.pl to check return value and pass on error
- update of opac-privacy.tt to display error if appropriate
Note bug 9942 remains unfixed, which is a similar issue upon issue return.
To test:
1. OPAC
- enable privacy mode (preference OpacPrivacy)
- leave anonymous patron set to zero (preference AnonymousPatron)
- attempt to delete user history
- observe error
- check history - still there
- change anonymous patron to a valid user
- attempt to delete user history
- observe success message
- check history - gone
2. cleanborrowers.pl
- test it functions as before. bug 9944 has been raised for it continuing to silently fail.
3. batch_anonymise.pl
- enable privacy mode (preference OpacPrivacy)
- leave anonymous patron set to zero (preference AnonymousPatron)
- run script (I use --days -1 for testing)
- script should fail with a Carp message
- change anonymous patron to a valid user
- run script as before
- script returns quietly
- check history - gone
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Mason James <mtj@kohaaloha.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Test plan:
1 - turn on EnableOpacSearchHistory
2 - launch some searches at the opac
3 - go to your search history
4 - there is no history!
5 - apply this patch
6 - retry steps 1 to 3
7 - your history search is available!
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
This does fix the bug, but does undo the change to make the cookie
utf-8 safe, however I think that change was done in the wrong way so
I am happy to sign this off
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Wondering if the comment line should be deleted now too.
Patch fixes the problem.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
When Bug 7570 added availability information to the cart it switched
which subroutine was used to get item information, and thus changed how
the information was being returned.
This patch makes accommodations for this change by adding processing of
item location information to the script in a way that will match the
existing template variables.
To test, add items to the cart in the OPAC some of which include
shelving location information. When you view the cart you should see the
shelving location displayed.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
The following errors appear when trying to use unapi under Plack (among
others):
Variable "$cgi" is not available at /home/jcamins/kohaclone/opac/unapi line 160.
Variable "$format_to_stylesheet_map" is not available at /home/jcamins/kohaclone/opac/unapi line 173.
Variable "$format_info" is not available at /home/jcamins/kohaclone/opac/unapi line 174.
Variable "$format_to_stylesheet_map" is not available at /home/jcamins/kohaclone/opac/unapi line 185.
To test:
1) Try to view /cgi-bin/koha/unapi under Plack
2) There is no step 2. Plack crashes.
3) Apply patch.
4) Try to view /cgi-bin/koha/unapi again, and note that it doesn't crash
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
I'm puzzled how this ever worked anyway, accidentally i'm guessing,
this tidies up some lazy coding
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This patch uses a lot of MARC21 XSLT to transform NORMARC records
to desired formats. Since NORMARC is mostly a subset of MARC21, I
think this should give passable results. And better results than
no unapi-support at all for NORMARC!
To reproduce:
- Make sure you have marcflavour = NORMARC
- Visit /cgi-bin/koha/unapi in a browser
- Observe the empty <formats></formats> element
To test:
- Apply the patch
- Visit /cgi-bin/koha/unapi in a browser
- Observe the the list of formats in the <formats></formats> element
- Import the provided sample NORMARC record and make a note of its
biblionumber
- View the record at /cgi-bin/koha/unapi?id=koha:biblionumber:x&format=y
where x = the biblionumber of the sample record and y = one of the
formats marcxml, marcxml-full, mods, mods-full, mods3, mods3-full,
oai_dc, rdfdc, rss2, rss2-full and srw_dc
- Check that the transformed records make some kind of superficial
sense
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Works exactly as it should according to the test plan. This is a nice
improvement.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Amended patch: Check OpacMaintenance!
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
To test
Search in the OPAC both logged and logged out
Signed-off-by: Magnus Enger <magnus@enger.priv.no>
When I turn off XSLT for the OPAC I can recreate the problem.
After applying the patch things work as expected for all
combinations of:
- Search results and detail view
- Logged in and not logged in
- XSLT and non-XSLT view
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests, QA script and test plan.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
In current implementation (mostly commented out in this patch)
uses heuristic to guess which strings need decoding from utf-8
to binary representation and doesn't support utf-8 characters
in templates and has problems with utf-8 data from database.
With this changes, Koha perl code always uses utf-8 encoding
correctly. All incomming data from database is allready
correctly marked as utf-8, and decoding of utf8 is required
only from Zebra and XSLT transfers which don't set utf-8 flag
correctly.
For output, standard perl :encoding(utf8) handler is used
so it also removes various "wide character" warnings as side-effect.
Test scenario:
1. make sure that you have utf-8 characters in your biblio
records, patrons, categories etc.
2. try to search records on intranet and opac which contain
utf-8 characters
3. install language which has utf-8 characters, e.g. uk-UA
dpavlin@koha-dev:/srv/koha/misc/translator(bug_6554) $
PERL5LIB=/srv/koha/ perl translate install uk-UA
4. switch language to uk-UA and verify that templates
display correctly
5. test search and Z39.50 search and verify that caracters
are correct
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
I followed the test plan, adding utf-8 characters to library names,
patron categories, titles, and authorized values. I tried the uk-UA
translation and everything looked good.
When performing Z39.50 searches for titles containing utf-8 characters I
got results which were still occasionally contaminated with dummy
characters [?] but I assume this is Z39.50's fault not the patch's.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Already signed, add mine.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
When in opac-topissues using filter "of the last:" with value "No limit", the result shows the caption : "The 10 most checked-out in the past 999 months".
This patch corrects a typo error : $timeLimit was used instead of $timeLimitFinite
Test plan :
- Go to OPAC most popular
- Select "No limit" in last filter and submit
=> Check that result displays caption : "The 10 most checked-out of all time"
- Come back
- Select "6 months" in last filter and submit
=> Check that result displays caption : "The 10 most checked-out in the past 6 months"
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
the my $branches = GetBranches();
already exist at line 444 (introduced by this patch)
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This feature enables a particular library's items to be emphasized and moved
to the first position on the search results and details pages of the OPAC.
It is enabled by the sytem preference HighlightOwnItemsOnOPAC.
To choose which branches items are emphasized, use the system preference
HighlightOwnItemsOnOPACWhich. It has two modes.
If set to PatronBranch, the items emphasized will be those of the same
library as the patron's library. If no one is logged into the opac, no
items will be highlighted.
If set to OpacURLBranch, the library is chosen based on the Apache
environment variable BRANCHCODE.
For example, this could be added to the OPAC section of koha-httpd.conf:
SetEnv BRANCHCODE "CPL"
The point of this feature is to allow each library on a given Koha server
to have a specific subdomain for the opac where that library's items are
empasized. That was http://branch1.opac.mylibrary.org will emphasize the
items of branch1, while http://branch2.opac.mylibrary.org will emphasize
the items of branch2.
Signed-off-by: Melia Meggs <melia@bywatersolutions.com>
Signed-off-by: Nora Blake <nblake@masslibsystem.org>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
