Adds the notices SHARE_INVITE and SHARE_ACCEPT to sample_notices.sql for
the foreign language installer files in installer/data/mysql.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
I tested each installer file by deleting all notices from letter, running
the file and counting the records. I did so with and without this patch.
The results below show that in each case two notices were added as
expected. Note that the English file contains 25 notices including the two
new ones.
BEFORE THIS PATCH:
de-DE/mandatory/sample_notices.sql: 23 notices
es-ES/mandatory/sample_notices.sql: 18 notices
fr-FR/1-Obligatoire/sample_notices.sql: 18 notices
it-IT/necessari/notices.sql: 21 notices
nb-NO/1-Obligatorisk/sample_notices.sql: 23 notices
pl-PL/mandatory/sample_notices.sql: 18 notices
ru-RU/mandatory/sample_notices.sql: 18 notices
uk-UA/mandatory/sample_notices.sql: 17 notices
AFTER THIS PATCH:
de-DE/mandatory/sample_notices.sql: 25 notices
es-ES/mandatory/sample_notices.sql: 20 notices
fr-FR/1-Obligatoire/sample_notices.sql: 20 notices
it-IT/necessari/notices.sql: 23 notices
nb-NO/1-Obligatorisk/sample_notices.sql: 25 notices
pl-PL/mandatory/sample_notices.sql: 20 notices
ru-RU/mandatory/sample_notices.sql: 20 notices
uk-UA/mandatory/sample_notices.sql: 19 notices
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
"Fines and fees" is consistent with the description of the
main "updatecharges" permission; in some areas, "charges" by itself
can refer to loans, not fees.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Rephrases permission description a bit to make it clearer and easier to
translate.
Adds German descriptions as requested by katrin.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes QA script and all tests.
Tested with various permission combinations:
- superlibrarian
- updatecharges (full permission)
- only 'remaining permissions for updating charges'
It works as expected.
Note: I think we need a follow up to include the
'Forgive overdue charges' checkbox on the check in page
in the new permission.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Adds new sub-permissions to updatecharges, 'writeoff' for writing off
fees and 'remaining_permissions' for all other fee related activites.
Test plan:
1) Apply patch
2) Run updatedatabase.pl
3) Remove the 'writeoff' permission from your privileges
4) Attempt to write off a fee, you should not be able to
5) Re-add the 'writeoff' permission
6) Attempt to write off a fee, you should now be able to do so
Signed-off-by: Joel Sasse <jsasse@plumcreeklibrary.net>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Some files had truncate. Some files had foreign key checks.
Other files had foreign key checks disabled. Some files gave
the column names expressly, and others assumed the fields in
a particular order. Everything was modified to:
- not truncate
- not say utf8 (because it should already be by default)
- not disable foreign key checks (because it should work)
- expressly name the fields (adding fields shouldn't break it)
TEST PLAN
---------
0) Backup opac_news if you care about your news.
1) open mysql client
2) use the koha database
3) Run the following script
TRUNCATE opac_news;
source ~/kohaclone/installer/data/mysql/uk-UA/optional/sample_news.sql
source ~/kohaclone/installer/data/mysql/it-IT/necessari/sample_news.sql
source ~/kohaclone/installer/data/mysql/de-DE/optional/sample_news.sql
source ~/kohaclone/installer/data/mysql/nb-NO/2-Valgfritt/sample_news.sql
source ~/kohaclone/installer/data/mysql/en/optional/sample_news.sql
source ~/kohaclone/installer/data/mysql/pl-PL/optional/sample_news.sql
source ~/kohaclone/installer/data/mysql/es-ES/optional/sample_news.sql
source ~/kohaclone/installer/data/mysql/ru-RU/optional/sample_news.sql
source ~/kohaclone/installer/data/mysql/fr-FR/2-Optionel/sample_news.sql
- Were there errors?
- Did everything add nicely?
- Not likely, by expressly stating the idnew field, the news
items in some files would not be added.
4) apply patch
5) try running the script again
- Were there errors?
- Did everything add nicely?
6) Log into the staff client
7) Tools->News
- Do you see the news items added?
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Much needed clean up, making for much more robust and less error prone
sql
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Revised Test Plan
-----------------
The following SQL commands were used to test this.
installer/data/mysql/en/optional/parameters.sql is part of the
first patch and didn't really need testing again.
installer/data/mysql/de-DE/optional/parameters.sql is not part
of the patch, but since I was playing with the script, which
is also attached here, it was included for good measure.
use kohadata;
SET FOREIGN_KEY_CHECKS=0;
TRUNCATE currency;
source /home/mtompset/kohaclone/installer/data/mysql/pl-PL/optional/parameters.sql
SET FOREIGN_KEY_CHECKS=0;
TRUNCATE currency;
source /home/mtompset/kohaclone/installer/data/mysql/es-ES/optional/parameters.sql
SET FOREIGN_KEY_CHECKS=0;
TRUNCATE currency;
source /home/mtompset/kohaclone/installer/data/mysql/ru-RU/optional/sample_currency.sql
SET FOREIGN_KEY_CHECKS=0;
TRUNCATE currency;
source /home/mtompset/kohaclone/installer/data/mysql/uk-UA/optional/sample_currency.sql
SET FOREIGN_KEY_CHECKS=0;
TRUNCATE currency;
source /home/mtompset/kohaclone/installer/data/mysql/it-IT/necessari/parameters.sql
SET FOREIGN_KEY_CHECKS=0;
TRUNCATE currency;
source /home/mtompset/kohaclone/installer/data/mysql/de-DE/optional/parameters.sql
SET FOREIGN_KEY_CHECKS=0;
TRUNCATE currency;
source /home/mtompset/kohaclone/installer/data/mysql/nb-NO/2-Valgfritt/parameters.sql
SET FOREIGN_KEY_CHECKS=0;
TRUNCATE currency;
source /home/mtompset/kohaclone/installer/data/mysql/en/optional/parameters.sql
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch adds 2 circulation permissions: force_checkout and
lift_restriction.
During upgrade, these two permission are added to existing staff
users that already have the base circulate permission.
force_checkout allows a librarian to force a checkout if a limitation
occurred.
lift_restriction allows a librarian to lift a restriction for a patron.
Test plan:
1/ Find a debarred patron and go on the checkout page. The "Lift
restriction" button should be present only if the logged librarian has
the lift_restriction permission.
2/ If the force_checkout permission is set, a librarian should be
allowed to check out in several cases:
- age restriction
- the item is issued to another patron
- the item is not for loan
- the patron has overdue items
- the item is lost
- the item is a high demand item
- the item is reserved
- another case ?
Signed-off-by: Cedric Vita <cedric.vita@dracenie.com>
Bug 10863: The force checkout permission should not affect high holds
- typo checkout => check out.
- the force checkout permission does not affect high holds.
Signed-off-by: Cedric Vita <cedric.vita@dracenie.com>
Bug 10863: Follow-up: Adding missing permissions to translated files
This patch adds the 2 new permissions to all remaining sample files.
If the permissions don't get installed, the problem is bigger than
having an English description.
Also adds back the question "Check out anyway?" for high demand items (HIGHHOLDS).
Test xt/permissions.t passes now.
Bug 10863: Rename lift_restriction with manage_restrictions
The pref manage_restrictions now takes into account "Lost card" and
"Gone no address" restrictions.
Test plan:
- log in with a user with manage_restrictions permission
- verify you can set/unset restrictions when editing a patron
- log in with a user without manage_restrictions permission
- verify you cannot set/unset restrictions when editing a patron
Signed-off-by: Mathieu Saby <mathieu.saby@univ-rennes2.fr>
Note: The AgeRestrictionOverride pref has to be set to "Allow" if you
want to override the age restriction, even if the new permission is set.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Passes koha-qa.pl, works as advertised
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Test plan:
Verify all sample_frequencies.* files have been moved from optional
to mandatory directories.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Test plan:
Verify all sample_numberpatterns.* files have been moved from optional
to mandatory directories.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
All sample files for numbering patterns are moved from optional
to mandatory.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
- List of libraries in basket.pl is now sorted by branch name, not code
- When IndependantBranches is ON, user has only the possibility to set
basket branch to its own branch, or to no branch at all.
- When basket do not belong to any branch, selected branch by default is
connection branch (was 'no branch')
- added id attributes to both added li elements
- change description of 'order_manage_all' permission to make it
clearer.
- remove Test::MockModule dependency
Signed-off-by: Sonia Bouis <sonia.bouis@univ-lyon3.fr>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
- Add branch info to baskets
- Add a list of borrowers that are allowed to manage a basket (one list
for each basket).
- Add a new subpermission: acquisition => order_manage_all
If user is superlibrarian, or if that user has permission acquisition = 1
(GranularPermissions = OFF), or subpermission acquisition =>
order_manage_all (GranularPermissions = ON), that user is authorised to manage
all baskets.
Depending on syspref AcqViewBaskets:
'all': user can manage all baskets
'branch': user can manage baskets of their branch (the basket branch is
taken into account, not the branch of the basket's creator).
If basket branch is not defined, all users can manage this
basket.
'user': user can manage baskets she created, and baskets in their
user list
There are unit tests in t/Acquisition/CanUserManageBasket.t, which
require Test::MockModule
You can edit basket's branch and users list in basket modification page
(acqui/basket.pl)
Signed-off-by: Sonia Bouis <sonia.bouis@univ-lyon3.fr>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
In the serial module, we want to hide serials from others libraries.
However, to permit central serials manage, this patch introduces a
new permission, 'superserials'. If a staff member has this permission,
that person can override the restriction.
Test plan:
- Switch on the IndependantBranches syspref
- Add the permission 'superserials' for a patron and test you can
navigate and see all serials
- Remove this permission and test you cannot manage/view subscriptions
from others libraries
Signed-off-by: Frederic Durand <frederic.durand@unilim.fr>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Serials numbering pattern and frequencies are no longer hard-coded. Now
it's possible to create, edit and delete numbering patterns (and
frequencies). This patch adds two new sql tables
(subscription_numberpatterns and subscription_frequencies)
Numbering patterns behave almost as before, there are still the same
values to configure (addX, everyX, settoX, whenmorethanX). lastvalueX
and innerloopX remain in subscription tables.
There is a new value in numbering patterns: numberingX. For each
"column" (X, Y or Z) you can tell how to format the number. Actually
numberingX can be set to:
- 'dayname' (name of the day) (0-6 or 1-7 depending on which day is the
first of the week)
- 'monthname' (name of the month) (0-11)
- 'season' (name of the season) (0-3) (0 is Spring)
These names are localized by using POSIX::setlocale and POSIX::strftime
and setting a 'locale' value to the subscription. Locale have to be
installed on the system.
Note that season names are not localized using POSIX::strftime (it can't
do this), so names are hardcoded into the code (available languages: en,
fr). This could be fixed in the future by using a Perl localization
framework.
Frequencies can be configured using 3 parameters:
- 'unit': one of 'day', 'week', 'month', 'year'
- 'issuesperunit': integer >= 1, the number of received issues per
'unit'
- 'unitsperissue': integer >= 1, the number of 'unit' between two
issues
One of 'issuesperunit' and 'unitsperissue' must be equal to 1.
Examples:
unit = 'day', issuesperunit=3, unitsperissue=1 => 3 issues per day
unit = 'week', issuesperunit=1, unitsperissue=3 => 1 issue each 3
weeks
Prediction pattern is now computed server-side and is more consistent
with what Koha will do. The publication date is displayed alongside the
serial number.
Irregularities can now be checked one by one, in the prediction pattern
table, or if frequency is 'day-based' (unit is 'day'), there is the
possibility to check all issues for a week day at once.
When an irregularity is found, there is the possibility to keep the
serial number unchanged, or to skip it. It is configured at subscription
creation or modification.
For instance, with a daily subscription you can have:
skip serial number | keep serial number
----------------------+----------------------
2012-01-01 ¦ No 1 | 2012-01-01 ¦ No 1
2012-01-03 ¦ No 3 | 2012-01-03 ¦ No 2
To lighten the subscription modification page, manual history has been
moved in its own page subscription-history.pl which is accessible on
subscription-detail.pl, tab 'Planning'.
Important note: updatedatabase.pl script takes into account existing
subscriptions and create appropriate numbering patterns for them (it
tries to create as few patterns as possible). Frequency is
mapped to the correct entry in subscription_frequencies table.
This patch includes kohastructure.sql and updatedatabase.pl changes
+ sample frequencies data and sample numberpatterns data for fresh
installs (sample data is included in updatedatabase.pl)
=== TEST PLAN: ===
Create a new subscription:
- Go to Serials module and click "New subscription" button
- On the first page, choose a biblio and click next to go to the
second page
- Pick a first issue publication date
- Choose frequency '1/day'
- Choose a subscription length of 15 issues
- Choose a subscription start date
- Choose numbering pattern 'Volume, Number'
- A table appears, fill 'Begins with' cells with '1'
- Click on 'Test prediction pattern' button
The prediction pattern is displayed at the right of the page. You can
see in it the serial number, the publication date and a checkbox to
allow you to choose which serials will not be received (irregularities).
You can see that serial number start from "Vol 1, No 1" continue to "Vol
1, No 12" and then restart with "Vol 2, No 1".
Frequency is '1/day' so you can see that publication date is incremented
by one day line after line.
- Now you can play a little with frequencies and numbering patterns,
change one of them (or both) and click again on 'Test prediction
pattern'
- For example, choose frequency '3/weeks' and click on 'Test
prediction pattern' button'.
There is a little behaviour change compared with current master.
Publication date will not be guessed within the week. Koha can't know
when you will receive issues. So the publication date stay the same
(monday of each week) for 3 consecutive issues and then jump to the next
week.
- Now choose frequency '1/3 months' and numbering pattern 'Seasonal'
- Fill 'Begins with' cells with '2012' for Year and '0' for Season
- Click on 'Test prediction pattern'
- You should have something like 'Spring 2012', 'Summer 2012', ...,
'Winter 2012', 'Spring 2013'
- Note that you can have seasons for south hemisphere by entering '2'
in 'Year/Inner counter'
- 2nd note: if you have some locales installed on your system, you can
type its name in the 'Locale' field (actually it does not work for
seasons name, only for month names and day names)
If you want to modify the numbering pattern you can still do it here:
- Click on 'Show/Hide advanced pattern' link. The advanced pattern
table is shown but all fields are readonly
- Click on 'Modify pattern' button. All readonly fields are now
editable. Note that 'Begins with' and 'Inner counter' line are
repeated here and any modifications in the small table will be
replicated in the big table, and vice versa.
- Pattern name is emptied, if you type a new name, a new pattern will
be created, and if you type the same name as an existing numbering
pattern, this one will be modified (with a confirmation message)
- There is two new lines in this table:
- Label: it's what is displayed in the smaller table headers above
- Numbering: used to format numbers in different ways. can be
'seasons', 'monthname' or 'dayname'. Month name and day name can be
localized using the 'Locale' field. Seasons can't (values for
English and french are hard-coded in Serials.pm)
- You can modify what you want in the table and click on 'Test
prediction pattern' button each time you want to see your
modifications. (Note that checkboxes for irregularities aren't displayed
in this mode, and you can't save the subscription until you have saved
or cancelled your changes).
- To cancel your modifications, just click on 'Cancel modifications'
button.
- To save them, click on 'Save as new pattern'. If the pattern name is
already existing, a confirmation box will ask you if you want to
modify the existing numbering pattern. Otherwise a new pattern will be
created and automatically selected.
Once you have finished modifying numbering pattern, you can click again
on 'Test prediction pattern' to define irregularities, and then click on
'Save subscription'.
Now you can check the serials module still works correctly:
- Check the subscription detail page to confirm that nothing is
missing. Especially the 'Frequency' and 'Number pattern' information.
- Try to receive some issues. Check that the serial number is correctly
generated and if irregularities you have defined are taken into
account (if you have defined some).
- Check that receiving is blocked once you have reached the number of
issues you have defined in subscription length (or once you have
reached the subscription end date)
In serials menu (to the left of almost each page of serials menu) you
have two new links: 'Manage frequencies' and 'Manage numbering
patterns'.
'Manage numbering patterns' lead to a page which list all numbering
patterns and allow you to create, edit or delete them. The interface is
almost the same as numbering pattern modification in subscription-add.pl
'Manage frequencies' lead to a page which list all frequencies and allow
you to create, edit or delete them.
Try to create a new frequency:
- Click on 'Manage frequencies' link in the serials menu and then click
on 'New frequency':
- Fill in the description (mandatory).
- Unit is one of 'day', 'week', 'month', year' or 'None' ('None' is for
an irregular subscription)
- If unit is different from 'None' you have to fill the two following
fields (Issues per unit, and Units per issue)
- Note that at least one of those must be equal to 1
- Issues per unit is the number of received issues by 'unit' and Units
per issue is the number of 'unit' between two issues
- Display order is used to build the drop-down list. Leave empty and it
will be set to 0 (top of the list)
- Then click on 'Save'
- Check that this new frequency appears in the frequencies table and in
the drop-down list in subscription-add.pl
Subscription history has been moved in its own page. To test if it still
works, choose a subscription with manual history enabled (or modify an
existing subscription to turn on manual history).
- On the detail page, tab 'Planning', you should have a link 'Edit history'.
- Click on it
- Modify history and click on Save
- In tab 'Summary' you should have the infos you just entered
And finally, you can check that old subscriptions (by old I mean
subscriptions that existed before the update) are correctly linked to an
existing numbering pattern and an existing frequency. Numbering patterns
should be named 'Backup pattern X' where X is a number.
Signed-off-by: Frédéric Demians <f.demians@tamil.fr>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Comment: Great development! Work as described. No koha-qa errors
(with all patches applied). Please QA this fast.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Squashed commits:
-----------------
Bug 7688 follow-up: Small fixes for QA
- # Subroutines::ProhibitExplicitReturnUndef: Got 1 violation(s) in
C4::Serials::GetSubscriptionIrregularities
- Bad template constructions fixed in serials/subscription-add.tt
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
----
Bug 7688 follow-up: Small fixes for QA #2
- "return undef" -> "return"
- ":utf8" -> ":encoding(UTF-8)"
- TAB -> SPACES
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
----
Bug 7688: Translate sample frequencies for french
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
----
Bug 7688: Fix generating next serial when there is no 'Expected' issue
It can happen when the Expected issue is claimed. In this case the
status of the last serial is 'Claimed'
This patch change the API of GetNextSeq and GetSeq
Test plan:
- Create a subscription which starts a long time ago so that serials
automatically appear in late issues
- Receive the first serial
- Go to claims page and claim the 2nd serial.
- Go back to the subscription page and click on 'Serial collection'
- You should have 2 serials, one 'Arrived' and one 'Claimed'.
- Click on Generate Next. This should fail with a software error message
("can't call method output ...")
- Apply this patch and click again on Generate Next. A new issue must be
created with status 'Expected'.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
----
Bug 7688: Followup FIX perldoc
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
To test:
- Install the specific language and run the web installer.
Or:
- Truncate or delete all from the itemtypes table in your database.
- Try to run the complete SQL in the itemtypes sample files.
Verify the table is filled correctly.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Works for all languages. No koha-qa errors.
Tested removing itemtypes, then loading new file,
and checking on staff.
For de, es, nb, and pl no problems. For ru I disable foreign
keys constraint before TRUNCATE and reenable it afterwards.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch adds a new user permission for patron list management,
tools => manage_patron_lists.
This closes a security issue with the original patch series where
patron lists and their contents could be retrieved and modified
without requiring authentication of any sort.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch updates the wthdrawn field in items and deleteditems to be
withdrawn instead. No functional changes are made.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Comment: Save for translation files (that will be fixed on next release),
only occurrence of wthdrawn is on updatedatabase.pl
No koha-qa errors.
This touch many files, and I did not test everything,
but all seems normal. I think that any problem could
be fixed later.
Perhaps both entries in updatedatabase.pl could be joined
into one, but thats for QA.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Adds a course reserves system for academic libraries.
The course reserves system allows libraries to create courses
and put items on reserves for those courses.
Each item with at least one reserve can have some of its attributes
modified while it is on reserve for at least one active course.
These attributes include item type, collection code, shelving location,
and holding library. If there are no active courses with this item
on reserve, it's attributes will revert to the original attributes
it had before going on reserve.
Test Plan:
1) Create new authorised value categories DEPARTMENT and TERM
2) Create a new course, add instructors to that course.
3) Reserve items for that course, verify item attributes have changed.
4) Disable course, verify item attributes have reverted.
5) Enable course again, verify item attributes again.
6) Delete course, verify item attributes again.
7) Create two new courses, add the same item(s) to both courses.
8) Disable one course, verify item attributes have not reverted.
9) Disable both courses, verify item attributes have reverted.
10) Enable one course, verify item attributes are again set to the
new values.
11) Edit reserve item attributes, verify.
12) Disable all courses, edit reserve item attributes, verify
the item itself still has its original attributes, verify
the reserve item attributes have been updated.
13) Verify the ability to remove instructors from a course.
14) Verify new permissions, top level coursereserves, with
subpermissions add_reserves and delete_reserves.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Corinne Bulac <corinne.hayet@bulac.fr>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
http://bugs.koha-community.org/show_bug.cgi?id=8125
This patch does several things:
- Set the default for 008/15-17 to "no " (yes, there is space at the end)
- Link from 008/15-17 in the value builder to NORMARC country codes
- Set the default for 008/35-37 to "nor" (by setting the
DefaultLanguageField008 syspref)
- Link from 008/35-37 in the value builder to NORMARC language codes
- Fix a missing <tr> around field 35-37
To reproduce:
- Run through the Web-installer in Norwegian and choose NORMARC as
the MARC flavour
- Go to Home > Cataloging > Add MARC record and add a new record
- Click in the field for 008. The default should look like:
130415t xxu||||| |||| 00| 0 eng d
^^^ ^^^
- Reload the page and open the value builder for 008. Problems:
- The text for 15-17 links to MARC21 country codes
- The default for 15-17 is xxu
- The text for 35-37 links to MARC21 language codes
- The default for 35-37 is eng
- If you choose e.g. "Monografier" in the top dropdown then click
on "OK" the window does not close
To test:
- Apply the patch and run through the Web-installer again, selecting
Norwegian and NORMARC
- Go to Home > Cataloging > Add MARC record and add a new record
- Click in the field for 008. The default should look like:
130415t no ||||| |||| 00| 0 nor d
^^^ ^^^
- Reload the page and open the value builder for 008.
- Check that...
- The default for 15-17 is "no " (with a space at the end)
- The link goes to NORMARC country codes
- The default for 35-37 is "nor"
- The link goes to NORMARC language codes
- Select something from the top dropdown and click "OK". Check that the
window closes and that the values that are entered into the 008 field
matches what you chose in the popup window.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Trusing Magnus is right, so testing for any regressions mainly, all good
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Only changes NORMARC specific plugin and system preferences
files. Changes all seem logical to me.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Some letters were missing or not translated in the German and
Norwegian data for the webinstaller. This patch adds them.
German
- RENEWAL (present, but not translated)
- OPAC_REG_VERIFY (missing)
Norwegian
- RENEWAL (present, but not translated)
- ISSUESLIP (missing)
- ISSUEQSLIP (missing)
- RESERVESLIP (missing)
- TRANSFERSLIP (missing)
- OPAC_REG_VERIFY (missing)
To test:
- Install Norwegian and German* translations
- Run through the web installer in German, making sure that
the sample letters are selected
- Check that there are no errors in the web installer
- Check <intranet>/cgi-bin/koha/tools/letter.pl - that the
letters look OK, and are translated
- Repeat the process for Norwegian
* = I had some problems with installing the German
translations that are in master, but now I can't reproduce
it. If you run into a problem where only some of the
subdirectories of koha-tmpl/intranet-tmpl/prog/de-DE/modules/
are cerated, try downloading and installing the 3.10 .po
files from Pootle.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This followup adds Catalan language into languages
other than english.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Rebased to master
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This patch
- Updates the sample servers installed by the web installer
- Does a database upgrade that changes the encoding for the servers
in question
To test:
- Do a Norwegian installation and make sure to choose the optional
sample Z39.50 targets
- Check that encodings for the Norwegian targets (BIBSYS, SAMBOK,
NORBOK and DEICHMAN) are all set to ISO_6937 (which is the wrong
encoding)
- Apply this patch and make sure updatadatabase.pl is run
- Check that the encoding for the four targets mentioned above are
now ISO_8859-1
- Do one search against each target and check that there are no
"strange" chars in the result list. Searching each of the targets
for "hessen" should give results that include "norwegian vowels"
- Log on to the MySQL of the test installation and empty the table
of Z39.50 targets:
mysql> delete from z3950servers;
- Load this file into MySQL from the command line:
installer/data/mysql/nb-NO/2-Valgfritt/z3950servers.sql
and check that it loads without errors and that the four
Norwegian targets are still set to have encoding = ISO_8859-1
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Comment: Work as described. No errors.
No koha-qa errors
Passed-QA-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This patch fixes the file of authorized values that is used when
the web installer is run in Norwegian:
Not translated: BOR_NOTES
Missing: REPORT_GROUP
To test:
- Install the Norwegian translation
- Run through the web installer in Norwegian
- Make sure the auth_val.sql file is included
- Check that there are no errors in the web installer
- Check that the BOR_NOTES and REPORT_GROUPS values are present
in Home > Administration > Authorized values
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
I can't test the validity of the translation, but it doesn't break
anything :)
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
SQL and NORMARC only, works alright.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This reverts commit 60508cb03d, reversing
changes made to 8579d07f14.
The patches for bug 7688 caused a failure in t/db_dependent/Serials.t:
not ok 8 - test getting history from sub-scription
Conflicts:
installer/data/mysql/kohastructure.sql
installer/data/mysql/updatedatabase.pl
kohaversion.pl
Serials numbering pattern and frequencies are no more hard-coded. Now
it's possible to create, edit and delete numbering patterns (and
frequencies). This implies new sql tables (subscription_numberpatterns
and subscription_frequencies)
Numbering patterns behave almost as before, there are still the same
values to configure (addX, everyX, settoX, whenmorethanX). lastvalueX
and innerloopX remain in subscription tables.
There is a new value in numbering patterns: numberingX. For each
"column" (X, Y or Z) you can tell how to format the number. Actually
numberingX can be set to:
- 'dayname' (name of the day) (0-6 or 1-7 depending on which day is the
first of the week)
- 'monthname' (name of the month) (0-11)
- 'season' (name of the season) (0-3) (0 is Spring)
These names are localized by using POSIX::setlocale and POSIX::strftime
and setting a 'locale' value to the subscription. Locale have to be
installed on the system.
Note that season names are not localized using POSIX::strftime (it can't
do this), so names are hardcoded into the code (available languages: en,
fr). This could be fixed in the future by using a Perl localization
framework.
Frequencies can be configured using 3 parameters:
- 'unit': one of 'day', 'week', 'month', 'year'
- 'issuesperunit': integer >= 1, the number of received issues per
'unit'
- 'unitsperissue': integer >= 1, the number of 'unit' between two
issues
One of 'issuesperunit' and 'unitsperissue' must be equal to 1.
Examples:
unit = 'day', issuesperunit=3, unitsperissue=1 => 3 issues per day
unit = 'week', issuesperunit=1, unitsperissue=3 => 1 issue each 3
weeks
Prediction pattern is now computed server-side and is more consistent
with what Koha will do. The publication date is displayed alongside the
serial number.
Irregularities can now be checked one by one, in the prediction pattern
table, or if frequency is 'day-based' (unit is 'day'), there is the
possibility to check all issues for a week day at once.
When an irregularity is found, there is the possibility to keep the
serial number unchanged, or to skip it. It is configured at subscription
creation or modification.
For instance, with a daily subscription you can have:
skip serial number | keep serial number
----------------------+----------------------
2012-01-01 ¦ No 1 | 2012-01-01 ¦ No 1
2012-01-03 ¦ No 3 | 2012-01-03 ¦ No 2
To lighten the subscription modification page, manual history has been
moved in its own page subscription-history.pl which is accessible on
subscription-detail.pl, tab 'Planning'.
Important note: updatedatabase.pl script takes into account existing
subscriptions and create appropriate numbering patterns for them (it
tries to create as few patterns as possible). Frequency is
mapped to the correct entry in subscription_frequencies table.
This patch includes kohastructure.sql and updatedatabase.pl changes
+ sample frequencies data and sample numberpatterns data for fresh
installs (sample data is included in updatedatabase.pl)
=== TEST PLAN: ===
Create a new subscription:
- Go to Serials module and click "New subscription" button
- On the first page, choose a biblio and click next to go to the
second page
- Pick a first issue publication date
- Choose frequency '1/day'
- Choose a subscription length of 15 issues
- Choose a subscription start date
- Choose numbering pattern 'Volume, Number'
- A table appears, fill 'Begins with' cells with '1'
- Click on 'Test prediction pattern' button
The prediction pattern is displayed at the right of the page. You can
see in it the serial number, the publication date and a checkbox to
allow you to choose which serials will not be received (irregularities).
You can see that serial number start from "Vol 1, No 1" continue to "Vol
1, No 12" and then restart with "Vol 2, No 1".
Frequency is '1/day' so you can see that publication date is incremented
by one day line after line.
- Now you can play a little with frequencies and numbering patterns,
change one of them (or both) and click again on 'Test prediction
pattern'
- For example, choose frequency '3/weeks' and click on 'Test
prediction pattern' button'.
There is a little behaviour change compared with current master.
Publication date will not be guessed within the week. Koha can't know
when you will receive issues. So the publication date stay the same
(monday of each week) for 3 consecutive issues and then jump to the next
week.
- Now choose frequency '1/3 months' and numbering pattern 'Seasonal'
- Fill 'Begins with' cells with '2012' for Year and '0' for Season
- Click on 'Test prediction pattern'
- You should have something like 'Spring 2012', 'Summer 2012', ...,
'Winter 2012', 'Spring 2013'
- Note that you can have seasons for south hemisphere by entering '2'
in 'Year/Inner counter'
- 2nd note: if you have some locales installed on your system, you can
type its name in the 'Locale' field (actually it does not work for
seasons name, only for month names and day names)
If you want to modify the numbering pattern you can still do it here:
- Click on 'Show/Hide advanced pattern' link. The advanced pattern
table is shown but all fields are readonly
- Click on 'Modify pattern' button. All readonly fields are now
editable. Note that 'Begins with' and 'Inner counter' line are
repeated here and any modifications in the small table will be
replicated in the big table, and vice versa.
- Pattern name is emptied, if you type a new name, a new pattern will
be created, and if you type the same name as an existing numbering
pattern, this one will be modified (with a confirmation message)
- There is two new lines in this table:
- Label: it's what is displayed in the smaller table headers above
- Numbering: used to format numbers in different ways. can be
'seasons', 'monthname' or 'dayname'. Month name and day name can be
localized using the 'Locale' field. Seasons can't (values for
english and french are hard-coded in Serials.pm)
- You can modify what you want in the table and click on 'Test
prediction pattern' button each time you want to see your
modifications. (Note that checkboxes for irregularities aren't displayed
in this mode, and you can't save the subscription until you have saved
or cancelled your changes).
- To cancel your modifications, just click on 'Cancel modifications'
button.
- To save them, click on 'Save as new pattern'. If the pattern name is
already existing, a confirmation box will ask you if you want to
modify the existing numbering pattern. Otherwise a new pattern will be
created and automatically selected.
Once you have finished modifying numbering pattern. You can click again
on 'Test prediction pattern' to define irregularities, and then click on
'Save subscription'.
Now you can check the serials module still works correctly:
- Check the subscription detail page to confirm that nothing is
missing. Especially the 'Frequency' and 'Number pattern' infos
- Try to receive some issues. Check that the serial number is correctly
generated and if irregularities you have defined are taken into
account (if you have defined some).
- Check that receiving is blocked once you have reached the number of
issues you have defined in subscription length (or once you have
reached the subscription end date)
In serials menu (to the left of almost each page of serials menu) you
have two new links: 'Manage frequencies' and 'Manage numbering
patterns'.
'Manage numbering patterns' lead to a page which list all numbering
patterns and allow you to create, edit or delete them. The interface is
almost the same as numbering pattern modification in subscription-add.pl
'Manage frequencies' lead to a page which list all frequencies and allow
you to create, edit or delete them.
Try to create a new frequency:
- Click on 'Manage frequencies' link in the serials menu and then click
on 'New frequency':
- Fill in the description (mandatory).
- Unit is one of 'day', 'week', 'month', year' or 'None' ('None' is for
an irregular subscription)
- If unit is different from 'None' you have to fill the two following
fields (Issues per unit, and Units per issue)
- Note that at least one of those must be equal to 1
- Issues per unit is the number of received issues by 'unit' and Units
per issue is the number of 'unit' between two issues
- Display order is used to build the drop-down list. Leave empty and it
will be set to 0 (top of the list)
- Then click on 'Save'
- Check that this new frequency appears in the frequencies table and in
the drop-down list in subscription-add.pl
Subscription history has been moved in its own page. To test if it still
works, choose a subscription with manual history enabled (or modify an
existing subscription to turn on manual history).
- On the detail page, tab 'Planning', you should have a link 'Edit history'.
- Click on it
- Modify history and click on Save
- In tab 'Summary' you should have the infos you just entered
And finally, you can check that old subscriptions (by old I mean
subscriptions that existed before the update) are correctly linked to an
existing numbering pattern and an existing frequency. Numbering patterns
should be named 'Backup pattern X' where X is a number.
Signed-off-by: Frédéric Demians <f.demians@tamil.fr>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Comment: Great development! Work as described. No koha-qa errors
(with all patches applied). Please QA this fast.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Trivial string substitution.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Test Plan:
1) Run xt/permissions.t, note the errors
2) Apply patch
3) Re-run xt/permissions.t, note the errors are gone
Signed-off-by: Claire Hernandez <claire.hernandez@biblibre.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
All tests and QA script pass.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This patch adds a new user permission overdues_report for the circulation module, and requires this permission to run the overdue items
report, rather than requiring full reports permissions.
Test plan :
With a user with permissions circulate_remaining_permissions :
- Add overdues_report permission to user
- Go to circulation home
=> you see "Overdues" link
- Clik on it
=> you are allowed to access and use this page
- Remove overdues_report permission to user
- Go to circulation home
=> you do not see "Overdues" link
- Edit URL : <server>/cgi-bin/koha/circ/overdue.pl
=> you are not allowed to access this page
- Go to main page
=> you don't have access to reports module
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Fridolyn SOMERS <fridolyn.somers@biblibre.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This patch updates the seed data from the target list at
http://www.loc.gov/z3950/lcserver.html#addr.
Comment: new target works. updated deleting and reloading
sample targets.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Elliott Davis <elliott@bywatersolions.com>
I agree with Galen that this may need to be incorproated as a follow-up
for current installations. Works fine for new installs
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Added a system preferences (RenewalSendNotice - default no) to controll the renewal notice sending.
Added to installer languages the renewal notice template.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
To test:
- Apply the patch
- Check that installer/data/mysql/nb-NO/1-Obligatorisk/userpermissions.sql
can be loaded into the DB without errors (you might have to do "DELETE
FROM permissions" first)
- Check that there are no English strings when you edit the permissions
of a patron
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passed-QA-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Sets a sensible default for CalendarFirstDayOfWeek in
installer/data/mysql/nb-NO/1-Obligatorisk/system_preferences.sql
To test:
- Do a complete web install in Norwegian
OR
- Load installer/data/mysql/nb-NO/1-Obligatorisk/system_preferences.sql
into MySQL from the command line
- Check that CalendarFirstDayOfWeek is set to 'Monday' and that
calendars display Monday as the first day of the week.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passed-QA-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Adds the "alphabet" syspref, which can hold a space separated list
of charachters, which can be expanded into browse links when needed.
To test:
- Make sure to run updatedatabase
- Check that the "alphabet" syspref was added under "I18N/L10N preferences"
- Check that browse links are displayed Home › Patrons
- Add some weird charachters like ÆØÅ to "alphabet" and check that the
browse links are still displayed ok
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Passed-QA-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This feature will add the option of displaying a select quote
for the day on the OPAC homepage. It will include the addition
of a QOTD editor in the tools section of the staff interface
which will allow the addition, editing, and deletion of quotes.
A single system preference will enable/disable the display of
the QOTD on the OPAC homepage. A new granular permission will
also be added to conrol user access to the QOTD editor tool.
Possible extentions to this would be code to allow alternate
quote selection algorithms to be added to vary how the currently
displayed quote is selected from the table of quotes.
This patch is a squash of the following work:
--Adding quotes table to kohastructure.sql and updatedatabase.pl
Note: This patch is intended for a MySQL based installation only.
That means that it includes backticks because that is what is required
at this point in history to install Koha correctly on a MySQL based
installation.
Feel free to port this over to the Pg stuff in the data/Pg directory.
--Adding system preference to control display of QOTD on OPAC main page
--Adding sample quote data
These quotes are taken from various US presidents. I'm not sure these
are applicable to the rest of the world, so I'm leaving it to translators
and others to add sample quote data for other languages.
--Adding edit_quotes user permissions
--Squash with other db related patches in this series
--Adding quotes editor pages to tools
--Adding QOTD editor link to tools homepage
--Integration of DataTables into QOTD Editor
--Impleminting jEditable into the quote editor
--Adding delete and add option to editor
--Fixing OPAC display so the QOTD div does not show if no quote is returned
--Also removing useless code from tools/quotes.pl
--Adding spans around QOTD foo in opac-main.tt
--Also fixing quote selection logic to accomodate the possibility of
a single quote in the db a litte better.
--Changing timestamp column header to a more user-friendly 'Last Displayed'
--Fixing bug in quote selection logic. This bug caused a situation where
when the table had only a single quote with an id greater than 1 in it,
no quote would be selected.
--Fixing up sorting in the quote editor table. --jcamins
--Adding span element to quote separator --jcamins
--Overriding the default empty table message supplied by datatables-strings.inc
--Adds missing page heading
--Adds beginning of click-for-help elements.
--Refactors delete functionality to allow selecting of quotes to delete,
enabling multi-delete.
--Refactors saving added quote functionality so that striking <Enter>
saves the new quote.
--Refactors canceling aded quote functionality so that striking <Esc>
cancels the new quote.
--Removing debug console.log statements
--Implementng the YUI button widget/toolbar used on other pages.
--Adds a 5px radius to all YUI buttons to bring them into
conformity with the general trend toward rounded corners
--Fixes capitalization in quote editor
--Implements improvements suggested by jcamins and oleonard
--Adds DataTables Plugin dataTables.fnReloadAjax.js
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Signed-off-by: Mason James <mtj@kohaaloha.com>
new permission : edit_patrons
Plan test:
- Go on the page: tools > Patrons modification (modborrowers.pl)
- Enter a list of cardnumbers (or use a file)
- Modify one or more patron's fields (you can modify surname, firstname,
branchname, category, sort1, sort2, date of enrollment, date of expiry,
debarred date, debarred comment and borrower note)
- Save
- Check on the result page (or in database for non-displayed fields) if
modifications have been correctly made.
- re test with different attributes. For each attributes filled with an
authorized value category, you can select a value in a drop-down list.
Else it's a free input text. If your attribute is filled with a patron
category, the modification performs only on patrons belonging to this
category
- Save
- Verify on the result page
Signed-off-by: Mathilde Formery <mathilde.formery@ville-nimes.fr>
Signed-off-by: Stéphane Delaye <stephane.delaye@biblibre.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
upload_local_cover_images is needed to use the new, cool local covers
feature
This patch
- adds upload_local_cover_images to
installer/data/mysql/nb-NO/1-Obligatorisk/userpermissions.sql
from whch it was missing, making it impossible to use the local
covers feature in an nb-NO installation
- translates the text of the preference for de-DE (thanks to cait,
drojf and mveron for the translation)
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Signed-off-by: Marc Veron <veron@veron.ch>
I did no fresh installs, however I
- had a look at the files before and after applying the patch
- carefully checked the syntax
- tested with MySQL by removing the entry in the table 'permissions'
double checked that now the entry in Staff client was one
and then did an insert with the sql snippets.
In DE-de the translated entry translation appeared as expected.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Removes the '0' values without description from the sample date for
authorised values.
To test:
1) Verify that SQL files load correctly
- truncate authorised_values; /* empty authorised values table */
- load sample data using one of the SQL files
2) Check cataloging interface - all status fields should only show 1 empty line
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
This patch does three things:
- Add a copyright comment to normarc_fastadd_framework.sql
- Change the value of marc_subfield_structure.hidden from -1 to 0 for
several subfields of 952, in both the default and fast add framework,
using this SQL statement:
update marc_subfield_structure set hidden = 0 where tagfield = '952' and hidden = -1;
- Add the maxlength column introduced by bug 7263 to all rows in
marc_subfield_structure, setting the following maxlengths:
000 = 24
008 = 40
all other subfields = 9999
The format of the SQL files is the one that is produced by exporting the
frameworks from the Web UI, with added copyright comments at the top.
To test:
- Install nb-NO
- Run through the web installer in Norwegian on an empty database
- Select NORMARC as the marcflavour
- Be sure to select the fast add framework ("Rammeverk for
hurtigkatalogisering" under "Valgritt")
- Check in Home › Administration › MARC Frameworks that 000 and 008
for both frameworks have the right length
- Add a dummy record so you get to the item edit screen and check that
the form for subfields looks good. The subfields that are shown
should be 01234578abcdefghjoptuvwyz and all subfields should have
a text box or a dropdown associated with them. Check this for
for both the default and fast add frameworks
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Walked through the test plan, seems to work well.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Set the rentalcharge = 0 for sample itemtypes (except Music for nb-NO).
To test:
Run through the web-installer for nb-NO and de-DE, and check that
itemtypes are displayed correctly for each language.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>.
Note: You have to install the language first in order to be able
to select it in the web installer. There was a problem
in the po files for nb-NO that kept all files from being created
correctly. I fixed the po file and did an installation with all sample
files. There is a problem with z3950servers.sql that is not caused
by this patch:
z3950servers.sql
ERROR 1136 (21S01) at line 1: Column count doesn't match value count at row 1
Web installer for de-DE ran without problems on the sample files.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Fix installer/data/mysql/nb-NO/2-Valgfritt/z3950servers.sql so it
includes column names.
To test:
- Install the nb-NO language
- Run through the web installer, and make sure to select the optional
("Valgfritt") z3950servers.sql file
- Check there are no errors
- Check that the Z39.50 errors are displayed OK in
Home › Administration › Z39.50 Servers
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Web installer runs without any errors now and I checked that
the Z39.50 servers were imported correctly and can be edited.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Branches can have their own version of notices - added branchcode to
letter table.
Support html notices - added is_html to letter table.
Support for borrower attributes in templates.
GetPreparedletter() is the interface for compiling letters (notices).
Sysprefs for notice and slips stylesheets
Added TRANSFERSLIP to the letters
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
